Nuclear Thermal Rocket Element Environmental

Simulator (NTREES)

SNSF 2009 Meeting

Marshall Space Flight Center

Michael Schoenfeld

https://ntrs.nasa.gov/search.jsp?R=20090025984 2020-07-28T23:01:09+00:00Z

• Need

• Capability

• Experiment Configuration

• Summary

Content

Purpose

– fuel materials that can withstand hot hydrogen is key for NTR.

– NTREES enables: • cost effective & rapid

screening of candidate material

• examining thermal hydraulic performance.

Design Requirements

• Fuel elements environment– Maximum temperature: 3000 K using non-contact Radio Frequency (RF)

power system– Pressure: 1,000 psi to simulate NTR chamber pressure– GH2 flow: up to 0.0011 lb/sec

• Test Sample Materials (surrogates and DU)– Composite graphite (U, Zr)C with ZrC coatings– Advanced CERMET W-Re/UN without coatings

INL CERMETAlabama A&MGlossy Carbon

NTREES Layout

GH2 Trailer

GH2 IsolationValve

CTRL Computer

Vent line

RF PowerSupply

Exhaust, Mixer, HX, Filter

GH2 Control Manifold

Hydrogen supply

Exhaust VPV

DAQ & Control Cabinet

NTRFEESTest Chamber

RF HX

Valve Control CabinetGN2

Manifold

Cooling water

Data Acquisition and Control SystemSchematic

NTREES System Schematic

• 50 kW RF power supply (up to 5 MW available)• Exhaust mixer system and heat exchanger to cool and dilute hot hydrogen flow• Mass spectrometer on vent when testing DU samples• Pyrometers to measure test specimen surface temperatures & axial profile

Coil Assembly

H2 Inlet

H2 / N2 Mixer

NTREES Setup

NTREES Setup

NTREES Setup

Hydrogen Panel

Vent Line

N2 Purge Panel

Water RecirculationSystem

MassSpectrometer

H2 / N2

Mixer

Heat Exchanger(dummy)

Pit

PressureVessel

NTREES Setup

Hydrogen InletPanel for Trailer

Exhaust VentNTREESFacility

Summary

• NTREES provides testing capability to simulate NTR environment (w/o radiation) & is operationally ready to begin testing.

• Enables cost effective & rapid testing for NTP

– candidate fuel screening (hot hydrogen corrosion)

– quantitative thermal hydraulic testing

• Experiment configuration

– Water cooled ASME vessel

– RF heated test piece which can contain surrogate or DU material

– GH2 up to 1000 psi and 0.001 lb/sec

– Instrumented for temperature, pressure, flow rates and mass spec. analysis of exhaust