nu-heat energypro hp & hp solar cylinder range

Nu-HeatU N D E R F L O O R & R E N E W A B L E S

HEATPUMPS

Information sheet

Nu-Heat EnergyPro HP & HP Solar cylinder rangeAn unvented domestic hot water cylinder for use with heat pumps

Freephone 0800 731 1976 or 01404 549770

Onlinewww.nu-heat.co.uk v1 ©Nu-Heat 12.17

WATER SUPPLY

Standard EnergyPro cylindersThese cylinders are intended for use with a mains-fed water supply that meets the Water Supply (Water Quality) Regulations 2000. Where a water softener has been fitted the chloride levels must not exceed 200ppm.

Super Duplex EnergyPro cylindersSuper Duplex cylinders are intended for use with private water supplies, i.e. borehole or well water. Where the water hardness exceeds 200ppm or does not comply with the levels set out in the Water Supply (Water Quality) Regulations 2000, the water must be treated by whatever means necessary.

Nu-Heat’s EnergyPro HP is a complete range of unvented cylinders, designed and developed specifically to work with Nu-Heat’s range of NIBE heat pumps.

FEATURES

High efficiency coil specifically designed for heat pump operation.

Manufactured from stainless steel for strength and durability.

3kW titanium immersion heater

Optimum connection positions at the front of the unit for ease of installation, easy access and minimal space requirements.

Fully labelled connections to help quick installation.

Cold water diffuser on cold inlet.

All connections supplied as standard.

Detailed installation, user and service manuals.

Highly insulated shell with foam injection, CFC/HCFC free.

Connections for optional EnergyPro™ secondary hot water pump for instant hot water.

Solar coil options.

Super Duplex models for use with boreholes and wells available.

* The warranty for Super Duplex cylinders that are fed from borehole or well water supplies (including treated supplies),

is 10 years.

*

Information sheet Nu-Heat EnergyPro HP cylinder range

Freephone 0800 731 1976 or 01404 549770

Onlinewww.nu-heat.co.uk

EnergyPro HP components

Primary Return

Cold Water Inlet

Aquastat Pocket

Primary Flow

Titanium Immersion (factory fitted)

Secondary Return

T&P Relief Valve

Hot Water Draw Off

EnergyPro HP Solar components

Primary Return

Cold Water Inlet

Aquastat Pocket

Primary Flow

Titanium immersion (factory fitted)

Secondary Return

T&P Relief Valve

Hot Water Draw Off

Solar Sensor

Solar / Boiler Flow

Solar / Boiler Return

1

2

3

4

5

6

7

8

9

10

11

EnergyPro HP200 & HPSD200

EnergyPro HP250S & HPSD250S

Total volume 194 litres 247 litres

Heat pump volume 194 litres 89 litres

Solar volume - 158 litres

Cylinder weight (full) 268kg 344kg

Cylinder heat loss 78W 87W

Heat up time (∆T@35˚C) 41 minutes 17 minutes

ENERGYPRO HP200 & HPSD200, ENERGYPRO HP250S & HPSD250 SOLAR

These cylinders are intended specifically for use with the NIBE F2040 single fan heat pump, for properties with a smaller hot water demand.

Both are supplied with all necessary components including:

• G3 inlet group

• Wholesome water expansion vessel

• Factory fitted T&P valve

• Over-temperature cut-out (solar only)

• Drain valves

• Manual air vent for coil

516

mm

676

mm

1271

mm

1376

mm

153

1mm 18

15m

m

540mm

Cupboard sizing

The cylinder footprint is 540mm diameter. A potable expansion vessel will also need to be accommodated, as well as the G3 inlet valve, and safety relief discharge plumbing.

EnergyPro HP200 & HPSD200 EnergyPro HP250S &HPSD250S

1

2

3

4

5

6

7

8

530mm

HEA

TIN

G EFFICIENCY RATING

ERP

A++

ERP

ENER

G

Y EFFICIENCY RATING

ERP

CA++

ERP

HEAT

ING

& H

O

T WATER EFFICIEN

CY

RA

TINGA

ERP

ENER

G

Y EFFICIENCY RATING

ERP

B

ENER

G

Y EFFICIENCY RATING

ERP

|CLASS

ENER

G

Y EFFICIENCY RATING

ERP

ENER

G

Y EFFICIENCY RATING

ERP

|||CLASS

ENER

G

Y EFFICIENCY RATING

ERP

HEA

TIN

G EFFICIENCY RATING

ERP

A+

ENER

G

Y EFFICIENCY RATING

ERP

D ENER

G

Y EFFICIENCY RATING

ERP

E1

2

3

4

5

6

7

8

9

10

11

1

2

3

4

5

6

7

8

3

3

3

9

196

196

94

6m

m9

81m

m

145

0m

m12

11m

m

33

5/3

50


Freephone 0800 731 1976 or 01404 549770



Primary Return

Cold Water Inlet

Aquastat Pocket

Primary Flow


Secondary Return

T&P Relief Valve

Hot Water Draw Off


Primary Return

Cold Water Inlet

Aquastat Pocket

Primary Flow


Secondary Return

T&P Relief Valve

Hot Water Draw Off

Solar Sensor

Solar / Boiler Flow


1

1

8

2

3

4

5

6

7










The intermediate sizes of cylinder are applicable across a wide range of situations. Suitable for both the NIBE F2040 range, as well as NIBE ground source heat pumps, and for a typical house size.


• G3 inlet group



• Over-temperature cut-out (GSHP and solar only)

• Drain valves


Cupboard sizing

The cylinder footprint is 600mm diameter. A potable expansion vessel will also need to be accommodated, as well as the G3 inlet valve, and safety relief discharge plumbing.


600mm600mm


2

3

3

4

5

6

7

8

53

0m

m

62

8m

m

115

3m

m 133

0m

m

158

5m

m

218

1018

mm 11

53

mm

158

5m

m

36

8m

m

133

3m

m

210

1

2

3

3

4

5

6

7

8

1

8

2

3

4

5

6

7

9

10

11

3

911

10

36

0m

m

215

Freephone 0800 731 1976 or 01404 549770












The intermediate sizes of cylinder are applicable across a wide range of situations. Suitable for both the NIBE F2040 range, as well as NIBE ground source heat pumps, and for a typical house size.


• G3 inlet group




• Drain valves


Cupboard sizing

The cylinder footprint is 710mm diameter. A 35-litre, wall-mounted potable expansion vessel will also need to be accommodated, as well as the G3 inlet valve, and safety relief discharge plumbing.


710mm710mm


1

2

3

3

4

5

6

7

8

60

0m

m

700

mm

125

5m

m

1275

mm

152

5m

m

22

6

1176

mm 15

70m

m

376

mm

128

1mm

22

0/2

15

1

2

3

34

5

6

7

8

3

9 11

10


Primary Return

Cold Water Inlet

Aquastat Pocket

Primary Flow


Secondary Return

T&P Relief Valve

Hot Water Draw Off


Primary Return

Cold Water Inlet

Aquastat Pocket

Primary Flow


Secondary Return

T&P Relief Valve

Hot Water Draw Off

Solar Sensor

Solar / Boiler Flow


1

8

2

3

4

5

6

7

1

8

2

3

4

5

6

7

9

10

11

3

911

20

mm


Freephone 0800 731 1976 or 01404 549770



Primary Return

Cold Water Inlet

Aquastat Pocket

Primary Flow


Secondary Return

T&P Relief Valve

Hot Water Draw Off


Primary Return

Cold Water Inlet

Aquastat Pocket

Primary Flow


Secondary Return

T&P Relief Valve

Hot Water Draw Off

Solar Sensor

Solar / Boiler Flow


1

8

2

3

4

5

6

7









ENERGYPRO HP500 HPSD500, ENERGYPRO HP500S AND HPSD500 SOLAR

The largest cylinder option is well matched to the larger heat pumps (both air and ground source) and for use where the property’s water demand is greater.


• G3 inlet group




• Drain valves


Cupboard sizing

The cylinder footprint is 710mm diameter.

Additional allowance must be made for connections at the front, 100mm at the top, and for other components, including the 50-litre floor standing expansion vessel.

EnergyPro HP500 & HPSD500 EnergyPro HP500S & HPSD500S

710mm

22

0/2

15

210

720

mm

60

0m

m

142

5m

m

1210

mm

143

0m

m

162

5m

m

162

0/1

63

5m

m

1870

mm

188

5m

m

710mm

1

2

3

3

4

5

6

8

7

3

1

2

3

3

4

5

6

8

7

3

9

10

11

9

375

1

8

2

3

4

5

6

7

11

9

10


Freephone 0800 731 1976 or 01404 549770


100 LITRE FLOOR STANDING BUFFER TANK

Cubic for best space efficiency

‘Passivated’ steel construction

White powder-coated casing

Four 28mm tappings

3kW immersion heater

Air vent

All fittings provided

2-year manufacturer’s warranty

If there is sufficient height, the EnergyPro HP200, EnergyPro HP250S Solar, EnergyPro HP300 or EnergyPro HP300S Solar can be mounted on top of the buffer tank; otherwise it may be mounted separately.

Weight (full) 140kg

Buffer tank heat loss 69W

560mm

590mm deep

45

5m

m

150 AND 215 LITRE FLOOR STANDING BUFFER TANKS

150 litre buffer tank

• Four 28mm tappings

• 3kW immersion

• Sensor pocket

• Manual air vent

• Drain off valve

215 litre buffer tank

• Four 32mm tappings

• Two 3kW immersions

• Sensor pocket

• Manual air vent

• Drain off valve

25 year manufacturer’s warranty

Stainless steel construction


Grey Plastisol outer casing is hard wearing and has a modern

appearance

Weight (full) 185kg

Standing heat loss 49W

Weight (full) 255kg

Standing heat loss 70W

577mm 577mm

108

0m

m 148

5m

m

50mm

50mm


Freephone 0800 731 1976 or 01404 549770


NIBE UKV220/UKV300/500 BUFFER TANKS

UKV220 floor standing buffer tank UKV300 floor standing buffer tank UKV500 floor standing buffer tank

UKV100 UKV200 UKV300 UKV500

625mmø 702mmø

165

0m

m

163

4m

m

50mm

50mm

21-36mm

NIBE UKV 100 LITRE WALL HUNG BUFFER TANK

Wall hung for properties with limited floor space, and insufficient height to use the buffer box

White powder-coated casing

Four 1” tappings


2-year manufacturer’s warranty

260mm

450mm

25mm

1” BSPF

Allow space for air

vents and pipework

1010

mm

UKV100 UKV200 UKV300 UKV500

856mmø

50mm

183

4m

m

UKV100

• Wall-hung

• Four tappings

• Drain off valve

UKV220

• Four tappings

• Air purge

• Drain off valve

• Adjustable feet (21–36mm)

UKV300

• Four tappings

• Air purge

• Drain off valve


UKV500

• Four tappings

• Air purge

• Drain off valve


5 year manufacturer’s warranty

Ensures flow to the heat pump

Class A insulation

Grey PVC outer casing

Low energy losses

21-36mm21-36mm

Freephone 0800 731 1976 or 01404 549770



CYLINDER EFFICIENCY FICHE

Model Energy class Heat loss (watts) at 65˚C

Storage volume (litres)

Size (mm)

EnergyPro HP200 & HP200SD cylinders C 78 194 1450 x 530ø

EnergyPro HP250S & HP250SSD Solar cylinders C 87 247 1815 x 540ø






EnergyPro HP500S & HPS500SSD Solar cylinders C 115 495 1885 x 710ø

BufferBox100™: 100 litre floor standing C 69 100 455 x 560 x 590

UKV100: 100-litre wall hung buffer tank C 60 98 1010 x 450ø

150 litre floor standing buffer tank B 49 150 1080 x 577ø

UKV220: 220-litre floor standing buffer tank C 77 218 1650 x 625ø

215-litre floor standing buffer tank C 70 215 1485 x 577ø



All Nu-Heat UFH & Renewables warranties start from the date of delivery and are only applicable to systems that have been registered with Nu-Heat by completing and returning the relevant commissioning documents, see Terms & Conditions for details. If a system has not been registered then all products carry a one-year warranty.

The original installer or a suitably competent alternative should be the initial point of contact in the event of a breakdown or other malfunction of the product.

For a list of Nu-Heat’s registered service partners please visit: www.nu-heat.co.uk/service

nu-heat energypro hp & hp solar cylinder range

Documents