( III ) INSULATING SYSTEM PAINTS

(A) WATER PROOFING

ROOF SILICONE STONE GUARD ACRYLIC LATEX CAULK ACRYLIC LATEX CAULK SUPER SEAL SWIMMING POOL

(B)THERMAL INSULATING PAINTS

INTUMESCENT PAINT FIRE RETARDANT FIRE RETARDANT CLEAR FIRE RETARDANT THINNER CAVALIER THERMAL INSULATING PAINT

(C) ANTI CARBONATION SYSTEM

PENETRATING SILOXANE PRIMER SEALER AQUA SILOXANE PRIMER ALIPHATIC ACRYLIC H.B. PROTECT SEAL

(A) WATER PROOFING

ROOF SILICONE STONE GUARD ACRYLIC LATEX CAULK ACRYLIC LATEX CAULK SUPER SEAL SWIMMING POOL

ROOF DESCRIPTION An Acrylic copolymer base, one component seamless, highly flexible

and durable waterproofing system which has good adhesion and excellent weather resistance.

RECOMMENDED USE Roof protection, also suitable to protect expanded polyurethane foam from deterioration by U.V rays.

TECHNICAL INFORMATION Colors White, Brick. Finish Smooth - Semi Gloss. Viscosity 20 - 30 Poise. Specific Gravity 1.34 ± 0.05 Solid by Weight % 60 ± 2% Theoretical Spreading Rate 2 - 6 m²/Lit. (depending on thickness). Film Thickness (D.F.T.) 300 - 400 microns per coat.

(W.F.T.) 650 - 860 microns per coat. Elongation - DIN 53455 400% Approx. (max). Water Resistance Excellent Water Vapour Permebility Good U. V. Resistance Excellent Reinforcement Fibre Glass Drying Time Touch dry : 4 - 6 hrs.

Recoatable: 12 - 16 hrs.

APPLICATION DATA Application Methods Brush, Roller or Towel. Thinning / Cleaning of Tools Water.

RECOMMENDED SYSTEM Primer Coat: 1 coat National Roof diluted (1 : 1) with water. Intermediate coat: 1 coat National Roof diluted (2 : 1) with water. Fix National Fiber Glass mesh while the intermediate is wet, allow to dry. Top Coat: 1 - 2 coats National Roof undiluted.

OR Without fibre mesh directly apply over dry intermediate coat 2 coats undiluted National Roof.

SURFACE PREPARATION Must be clean, dry and free from dust, sand, other contaminations. Local touch -up of larger blow holes / cracks should be carried out prior to the application of the first full coat of National Roof.

1/2

ROOF

MISCELLANEOUS DATA STORAGE The product must be stored according to National Regulations. The

product should be kept in cool and well ventilated place, protected from heat and direct sunlight at temp 5-35ºC. Containers must be kept tightly closed.

HANDLING Handle with care, mix well before use. SHELF LIFE 18 months. SAFETY / HEALTH - Ensure good ventilation during application and drying.

- Avoid contact with skin and eyes. While painting it is advisable to wear eye protector. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes from skin; use soap and water or a recognized skin cleaner.

- Keep out of reach of children. NOTE: We warranty the quality of our product and this data sheet represents test results and practical experience

obtained under controlled conditions. We reserve the right to change data without prior notice. 2/2

SILICONE STONE GUARD DESCRIPTION A Silicone base transparent water proofing system which has good

penetration and drying even on damp substrate and develops water repellency very fast along with high alkaline resistance.

RECOMMENDED USE All kind of concrete, mineral stucco, cement fiber-boards, sand-line brick work, mineral paints etc…

TECHNICAL INFORMATION Colors Clear, Transparent. Finish Matt. Viscosity 2.5 - 3.5 Poise. Specific Gravity 0.78 ± 0.02 Solid by Weight % 5 ± 0.2% Theoretical Spreading Rate 3 - 5 m²/Lit. Drying time Touch dry : 1 hr.

Recoatable: 2 - 4 hrs. Flash Point 38ºC

APPLICATION DATA Application Methods Brush, Roller or Spray. Thinning / Cleaning of Tools White Spirits.

SURFACE PREPARATION The stone walls should be throughly clean from dust and dirt.

MECHANICIALReacts with atmospheric moisture or pore water in the substrate, thereby generating the active ingredient and liberating alcohol, the active ingredient greatly lowers absorbency of the substrate. Since neither pores nor capillaries are clogged, the substrate retains a very high degree of water vapor permeability.

MISCELLANEOUS DATA STORAGE The product must be stored according to National Regulations. The

product should be kept in cool and well ventilated place, protected from heat and direct sunlight at temp 5-35ºC. Containers must be kept tightly closed.

HANDLING Handle with care, mix well before use. SHELF LIFE 6 months. SAFETY / HEALTH - Ensure good ventilation during application and drying.

- Avoid contact with skin and eyes. While painting it is advisable to wear eye protector. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes from skin; use soap and water or a recognized skin cleaner.

Keep out of reach of children. NOTE: We warranty the quality of our product and this data sheet represents test results and practical experience

obtained under controlled conditions. We reserve the right to change data without prior notice.

ACRYLIC LATEX CAULK DESCRIPTION An Acrylic copolymer base sealant filler which is flexible, has high

adhesion and good weather resistance along with resistance to algae/moss/fungus.

RECOMMENDED USE For filling up splits and parties in door and windows as well as sanitary pipes.

TECHNICAL INFORMATION Colors White, Bronze. Viscosity Thick paste. Specific Gravity 1.56 ± 0.05 Solid by Weight % 75 ± 2% Drying Time Touch dry: 30 min.

Hard dry : 24 hrs. NOTE: It must not be used for splits wider than 1cm before treatment.

APPLICATION DATA Application Methods Special Gun. Cleaning of Tools Water

SURFACE PREPARATION Surface to be sealed should be sound dry, free of oils, dust mortar spatter, release agents, old caulks, intermediate old paint or other contaminants.

MISCELLANEOUS DATA STORAGE The product must be stored according to National Regulations. The

product should be kept in cool and well ventilated place, protected from heat and direct sunlight at temp 5-35ºC. Containers must be kept tightly closed.

HANDLING Handle with care, mix well before use. SHELF LIFE 18 months. SAFETY / HEALTH - Ensure good ventilation during application and drying.

- Avoid contact with skin and eyes. While painting it is advisable to wear eye protector. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes from skin; use soap and water or a recognized skin cleaner.

- Keep out of reach of children. NOTE: We warranty the quality of our product and this data sheet represents test results and practical experience

obtained under controlled conditions. We reserve the right to change data without prior notice.

ACRYLIC LATEX CAULK SUPER SEAL DESCRIPTION A high solid Styrene-Acrylic base sealant filler which is flexible, has

high adhesion and good weather resistance along with resistance to algae/moss/fungus.

RECOMMENDED USE For filling up splits and parties in door and windows as well as sanitary pipes.

TECHNICAL INFORMATION Colors White Specific Gravity 1.68 ± 2% Solid by Weight % 70 ± 2% Drying Time Touch dry : 2 hrs.

Recoatable: 6 hrs. NOTE: It must not be used for splits wider than 1 cm before treatment.

APPLICATION DATA Application Methods Special Gun. Cleaning of Tools Water

SURFACE PREPARATION Surface to be sealed should be sound dry, free of oils, dust mortar spatter, release agents, old caulk, intermediate old paint or other contaminants.

MISCELLANEOUS DATA STORAGE The product must be stored according to National Regulations. The

product should be kept in cool and well ventilated place, protected from heat and direct sunlight at temp 5-35ºC. Containers must be kept tightly closed.

HANDLING Handle with care, mix well before use. SHELF LIFE 18 months. SAFETY / HEALTH - Ensure good ventilation during application and drying.

- Avoid contact with skin and eyes. While painting it is advisable to wear eye protector. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes from skin; use soap and water or a recognized skin cleaner.

- Keep out of reach of children. NOTE: We warranty the quality of our product and this data sheet represents test results and practical experience

obtained under controlled conditions. We reserve the right to change data without prior notice.

SWIMMING POOL DESCRIPTION A chlorinated rubber base paint having good color retention, high

resistance to severe weather conditions, durability and flexibility.

RECOMMENDED USE For use on concrete, swimming pool etc.

TECHNICAL INFORMATION Colures White, Blue. Finish Smooth & Matt. Viscosity (25ºC) 14 - 16 Poise. Specific Gravity 1.44 ± 0.05 Solid by Weight % 70 ± 5% Theoretical Spreading Rate 5 - 6 m2/Lit. Drying time Touch dry: 15 - 20 min.

Hard dry : 2 - 4 hrs. Flash point 35ºC NOTE: It must not be used for splits wider than 1 cm before treatment.

APPLICATION DATA Application Methods Brush, Spray, Roller. Thinning / Cleaning of Tools Ready for use, could be diluted with Synthetic Thinner. Film Thickness (D.F.T.) 100 microns. Guiding Data for Airless Spray Nozzle Tip: 0.015" - 0.20"

Nozzle Pressure: 2200 P.S.I

SURFACE PREPARATION Surface must be clean, dry and free from oil grease, dirt etc...

MISCELLANEOUS DATA STORAGE The product must be stored according to National Regulations. The

product should be kept in cool and well ventilated place, protected from heat and direct sunlight at temp 5-35ºC. Containers must be kept tightly closed.

HANDLING Handle with care, mix well before use. SHELF LIFE 18 month. SAFETY / HEALTH - Ensure good ventilation during application and drying.

- Avoid contact with skin and eyes. While painting it is advisable to wear eye protector. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes from skin; use soap and water or a recognized skin cleaner.

- Keep out of reach of children. NOTE: We warranty the quality of our product and this data sheet represents test results and practical experience

obtained under controlled conditions. We reserve the right to change data without prior notice.

(B)THERMAL INSULATING PAINTS

INTUMESCENT PAINT FIRE RETARDANT PAINT FIRE RETARDANT CLEAR FIRE RETARDANT THINNER CAVALIER THERMAL INSULATING PAINT

INTUMESCENT PAINT DESCRIPTION A special resin base intumescent paint developed for protection from

fire. The dried film gives resistance against fire and protection to base substrate.

RECOMMENDED USE As an intumescent top coat paint on wood, steel, concrete etc.

TECHNICAL INFORMATION Colors White Finish Matt or Silky Solid by Volume % 60 ± 2% Theoretical Spreading Rate 3 m2/Lit. per coat. Specific Gravity 1.20 ± 0.05 Drying Time Touch Dry: 2 hrs.

Recoat Interval: 24 hrs. Hard Dry: 48 hrs. Temperature, humidity, air movment, film thickness and number of coats all affect the drying time.

Fire Resistance Direct : 600ºC: 30 min. Indirect : 600°C: 2 hrs.

Flash Point 29ºC

APPLICATION DATA Application Methods Brush, Roller or Spray. Thinning (Max. Vol.) 5 - 10% by National Thinner No.110 Film Thickness (D.F.T.) 200 microns.

(W.F.T.) 380 microns. Guiding Data for Airless Spray Nozzle Orifice: 0.0017"

Nozzle Pressure: 2200 P.S.I. Atomizing Pressure: 50 P.S.I.

SURFACE PREPARATION Surface should be thoroughly cleaned, dry and primed. 1) Apply first thin coat. 2) Apply second coat. 3) Apply third coat for better fire retardant properties.

1/2

INTUMESCENT PAINT

MISCELLANEOUS DATA STORAGE The product must be stored according to National Regulations. The

product should be kept in cool and well ventilated place, protected from heat and direct sunlight at temp 5-35ºC. Containers must be kept tightly closed.

HANDLING Handle with care, mix well before use. SHELF LIFE 18 months. SAFETY / HEALTH - Ensure good ventilation during application and drying.

- Avoid contact with skin and eyes. While painting it is advisable to wear eye protector. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes from skin; use soap and water or a recognized skin cleaner.

- Keep out of reach of children. NOTE: We warranty the quality of our product and this data sheet represents test results and practical experience

obtained under controlled conditions. We reserve the right to change data without prior notice. 2/2

FIRE RETARDANT PAINT DESCRIPTION A solvent special resin base fire-retardant coating developed for giving

protection against fire. When applied on a surface gives fire resistance and protects the base surface.

RECOMMENDED USE As a fire retardant topcoat on wood, steel, concrete, etc.

TECHNICAL INFORMATION Colors White Finish Matt Solid by Volume % 55% ± 2 Theoretical Spreading Rate 2.5 m2/Lit. Specific Gravity 1.25 ± 0.05 Drying Time: Touch Dry: 1 - 2 hrs.

Recoat Interval: 10 - 12 hrs. Hard Dry: 24 hrs. Temperature, humidity, air movment, film thickness and number of coats all affect the drying time.

Fire Resistance Direct : 400ºC : 30 min. Indirect : 400°C : 2 hrs.

Flash Point 29ºC

APPLICATION DATA Application Methods Brush, Roller or Spray. Thinning (Max. Vol.) 5 - 10% by National Fire Retardant Thinner. Film Thickness (D.F.T.) 100 microns.

(W.F.T.) 180 microns. Guiding Data for Airless Spray Nozzle Orifice: 0.0017"

Nozzle Pressure: 2200 P.S.I. Atomizing Pressure: 50 P.S.I.

SURFACE PREPARATION Surface should be thoroughly cleaned, dry. 1) Apply first thin coat. 2) Apply second coat. 3) Apply third coat for better fire retardant properties.

1/2

FIRE RETARDANT PAINT

MISCELLANEOUS DATA STORAGE The product must be stored according to National Regulations. The

product should be kept in cool and well ventilated place, protected from heat and direct sunlight at temp 5-35ºC. Containers must be kept tightly closed.

HANDLING Handle with care, mix well before use. SHELF LIFE 18 months. SAFETY / HEALTH - Ensure good ventilation during application and drying.

- Avoid contact with skin and eyes. While painting it is advisable to wear eye protector. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes from skin; use soap and water or a recognized skin cleaner.

- Keep out of reach of children. NOTE: We warranty the quality of our product and this data sheet represents test results and practical experience

obtained under controlled conditions. We reserve the right to change data without prior notice. 2/2

FIRE RETARDANT CLEAR DESCRIPTION A solvent synthetic resin base Fire Retardant Clear specially developed

to give a clear transparent finish which when applied protects the surface from fire.

RECOMMENDED USE Suitable for use on wood and other surfaces making it fire retardant by resisting the fire for a prolonged period.

TECHNICAL INFORMATION Colors Clear, Transparent. Finish Semigloss. Solid by Volume % 37 % ± 2 Theoretical Spreading Rate 4 m2/Lit. Specific Gravity 0.94 ± 0.05 Drying Time Touch Dry: 1 - 2 hrs.

Recoat Interval: 10 - 12 hrs. Hard Dry: 24 hrs. Temperature, humidity.air movment, film thickness and number of coats will all affect the drying time.

Fire Resistance Direct : 600ºC: 30 min. Indirect : 600°C: 1 hrs.

Flash Point 32ºC

APPLICATION DATA Application Methods Brush, Roller or Spray. Thinning (Max. Vol.) 5 - 10% by National Thinner No.110. Film Thickness (D.F.T.) 100 microns.

(W.F.T.) 270 microns. Guiding Data for Airless Spray Nozzle Orifice: 0.0017"

Nozzle Pressure: 2200 P.S.I.

SURFACE PREPARATION Surface should be thoroughly cleaned, dry.

(1) Apply first thin coat National Fire Retardant Paint : 2 - 3 coats (2) Apply second coat National Fire Retardant Clear : 1 coat

OR (3) Apply National Fire Retardant Clear : 3 coats

1/2

FIRE RETARDANT CLEAR

MISCELLANEOUS DATA STORAGE The product must be stored according to National Regulations. The

product should be kept in cool and well ventilated place, protected from heat and direct sunlight at temp 5-35ºC. Containers must be kept tightly closed.

HANDLING Handle with care, mix well before use. SHELF LIFE 18 months. SAFETY / HEALTH - Ensure good ventilation during application and drying.

- Avoid contact with skin and eyes. While painting it is advisable to wear eye protector. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes from skin; use soap and water or a recognized skin cleaner.

- Keep out of reach of children. NOTE: We warranty the quality of our product and this data sheet represents test results and practical experience

obtained under controlled conditions. We reserve the right to change data without prior notice. 2/2

FIRE RETARDANT THINNER DESCRIPTION A special Thinner for Fire Retardant Coating.

RECOMMENDED USE As reducer Thinner for Fire Retardant Coating.

TECHNICAL INFORMATION Appearance Transparent Liquid.

Specific Gravity @ 15 ºC 0.77 - 0.79

Viscosity by Fordcup B4 12 - 14 Seconds.

Odour Mild

Flash Point 41ºC

Refractive Index @ 20°C ASTM D-1218

1.432

Distillation Range @ 101,3kpa (ASTM D-1078)

150 - 197ºC

MISCELLANEOUS DATA STORAGE The product must be stored according to National Regulations. The

product should be kept in cool and well ventilated place, protected from heat and direct sunlight at temp 5-35ºC. Containers must be kept tightly closed.

HANDLING Handle with care, mix well before use. SHELF LIFE 24 months. SAFETY / HEALTH - Ensure good ventilation during application and drying.

- Avoid contact with skin and eyes. While painting it is advisable to wear eye protector. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes from skin; use soap and water or a recognized skin cleaner.

- Keep out of reach of children. NOTE: We warranty the quality of our product and this data sheet represents test results and practical experience

obtained under controlled conditions. We reserve the right to change data without prior notice.

CAVALIER THERMAL INSULATING PAINT DESCRIPTION An Insulating paint based on water base elastomeric Acrylic resin. It

contains special hollow ceramic microspheres as primary filler, which mainly functions for thermal insulation. The dried film has good flexibility, adhesion, toughness and excellent water resistance and UV resistance. It contains antifungal and antibacterial additives.

RECOMMENDED USE Most suitable as roof coating, as water proofing and thermal insulating material. Can be applied on cementitious surfaces, metal roofs for commercial and residential buildings. Also useful for duct coating insulation.

TECHNICAL INFORMATION Colors White and Light colors. Finish Matt / Rough Solid by Volume % 56% ± 2% Theoretical Spreading Rate 1.0 - 0.6 m2/Lit. (depending on thickness). Specific Gravity KG/L 1.05 ± 0.05 Drying Time Touch Dry: 4 - 6 hrs.

Recoat Interval: 12 - 16 hrs. Temperature, humidity, air movement, film thickness and number of coats all affect the drying time.

Flash Point Water base.

APPLICATION DATA Application Methods Roller, Spray, long haired brush or knife applicator. Thinning (Max. Vol.) 5% depending on the method of application. Thinning / Cleaning of Tools Water Film Thickness (D.F.T.) 600 -1000 microns.

SURFACE PREPARATION Surface should be thoroughly cleaned, dry and applied as follows:-. - National Acrylic Primer (W.B.) : 1 coat

OR - National Thermal Insulating Paint (1:1 diluted) : 1 coat - National Thermal Insulating Paint : 2 coats For galvanized surface use National Wash Primer before application.

1/2

CAVALIER THERMAL INSULATING PAINT

MISCELLANEOUS DATA STORAGE The product must be stored according to National Regulations. The

product should be kept in cool and well ventilated place, protected from heat and direct sunlight at temp 5-35ºC. Containers must be kept tightly closed.

HANDLING Handle with care, mix well before use. SHELF LIFE 18 months. SAFETY / HEALTH - Ensure good ventilation during application and drying.

- Avoid contact with skin and eyes. While painting it is advisable to wear eye protector. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes from skin; use soap and water or a recognized skin cleaner.

- Keep out of reach of children. NOTE: We warranty the quality of our product and this data sheet represents test results and practical experience

obtained under controlled conditions. We reserve the right to change data without prior notice. 2/2

(C) ANTI CARBONATION SYSTEM

PENETRATING SILOXANE PRIMER SEALER AQUA SILOXANE PRIMER ALIPHATIC ACRYLIC H.B. PROTECT SEAL

PENETRATING SILOXANE PRIMER SEALER

DESCRIPTION A special solvent based polysiloxane primer sealer, with excellent penetrating and good sealing properties. It penetrates deeply into the pores of the cement concrete and masonry surface, resulting better water repellant properties. It has excellent resistance to alkali, moisture and light.

RECOMMENDED USE As Penetrating Primer Sealer for interior and exterior concrete, plaster asbestos, brick work, etc…

TECHNICAL INFORMATION Colors Clear Finish Smooth, Matt. Viscosity 20 ± 2%

Specific Gravity KG/L 0.91 ± 0.02 Solid by Weight % 4 - 5 m2/Lit. (Depends on surface and film thickness). Penetration) 2 - 3 mm. Drying Time Touch Dry : 1 hrs.

Recoatable: 2 - 3 hrs. Temperature, humidity, air movement and film thickness all affect the drying time.

Flash point 25ºC. APPLICATION DATA

Application Methods Brush, roller or spray. Thinning (Max. Vol.) Ready to use. Thinning / Cleaning of Tools National GP Thinner. Guiding Data for Airless Spray Nozzle Tip: 0.025"

Nozzle Pressure As low as possible. Conv. Spray Requirements As low as possible. Recommended System Apply one coat of National Penetrating Siloxane Sealer for masonry

on dry and clean surface. On too much porous surface apply two coats. Then apply recommended system.

MISCELLANEOUS DATA STORAGE The product must be stored according to National Regulations. The

product should be kept in cool and well ventilated place, protected from heat and direct sunlight at temp 5-35ºC. Containers must be kept tightly closed.

HANDLING Handle with care, mix well before use. SHELF LIFE 6 months. SAFETY / HEALTH - Ensure good ventilation during application and drying.

- Avoid contact with skin and eyes. While painting it is advisable to wear eye protector. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes from skin; use soap and water or a recognized skin cleaner.

- Keep out of reach of children. NOTE: We warranty the quality of our product and this data sheet represents test results and practical experience

obtained under controlled conditions. We reserve the right to change data without prior notice.

AQUA SILOXANE PRIMER

DESCRIPTION A special solvent based polysiloxane primer sealer, with excellent penetrating and good sealing properties. It penetrates deeply into the pores of the cement concrete and masonry surface, resulting better water repellant properties. It has excellent resistance to alkali, moisture and light. It contains antifungal and antibacterial properties.

RECOMMENDED USE As Penetrating Primer Sealer for interior and exterior concrete, plaster asbestos, brick work, etc…

TECHNICAL INFORMATION Colors Clear Finish Smooth, Matt. Viscosity 16 ± 2%

Specific Gravity KG/L 1.00 ± 0.05 Solid by Weight % 4 - 5 m2/Lit. (Depends on surface and film thickness). Penetration) 2 - 3 mm. Drying Time Touch Dry : 1 hrs.

Recoatable: 2 - 3 hrs. Temperature, humidity, air movement and film thickness all affect the drying time.

Flash point Water base.

APPLICATION DATA Application Methods Brush, roller or spray. Thinning (Max. Vol.) Ready to use. Thinning / Cleaning of Tools Ready to use, if required water to be used. Guiding Data for Airless Spray Nozzle Tip: 0.025"

Nozzle Pressure As low as possible. Conv. Spray Requirements As low as possible Recommended System Apply one coat of National Aqua Siloxane Primer for masonry on dry

and clean surface. On too much porous surface apply two coats. Then apply recommended system.

MISCELLANEOUS DATA STORAGE The product must be stored according to National Regulations. The

product should be kept in cool and well ventilated place, protected from heat and direct sunlight at temp 5-35ºC. Containers must be kept tightly closed.

HANDLING Handle with care, mix well before use. SHELF LIFE 12 months. SAFETY / HEALTH - Ensure good ventilation during application and drying.

- Avoid contact with skin and eyes. While painting it is advisable to wear eye protector. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes from skin; use soap and water or a recognized skin cleaner.

- Keep out of reach of children. NOTE: We warranty the quality of our product and this data sheet represents test results and practical experience

obtained under controlled conditions. We reserve the right to change data without prior notice.

ALIPHATIC ACRYLIC H.B.

DESCRIPTION It is special Aliphatic Acrylic H.B. based on methacrylate polymer. Has tough dry film giving long lasting performance, very good adhesion and weather resistance. Additionally it has excellent resistance against water and U.V. radiation and anti-carbonization properties.

RECOMMENDED USE Specifically developed as a top coat on National Penetrating Siloxane Primer Sealer, for application on cementatious surface, walls, etc.

TECHNICAL INFORMATION Colors As per shade card. Finish Matt. Volume Solids 55 ± 2%Specific Gravity KG/L 1.40 ± 0.05 (for white and pastel shades). Theoretical Spreading Rate 7 - 8 m2/Lit. per coat Film Thickness (D.F.T.) 70 microns per coat (Depends on surface).

(W.F.T.) 130 microns per coat (Depends on surface). Drying Time @ 30ºC. Touch Dry: 1 hr.

Recoatable: 3 - 4 hrs. Hard Dry : 24 hrs. Temperature, humidity, air movement and film thickness all affect the drying time.

Flash point 32ºC. APPLICATION DATA

Application Methods Roller or spray. Thinning (Max. Vol.) 5% depending on the method of application. Thinning / Cleaning of Tools National Acrylic Thinner. Guiding Data for Airless Spray Nozzle Tip: : 0.018" - 0.020"

Nozzle Pressure: 2100 P.S.I. Conv. Spray Requirements Automizing Pressure: 50 P.S.I. Mixing Ration (Volume) Base : Hardener : N.A. Pot Life @ 30ºC. N.A. Recommended System National Penetrating Siloxane Primer Sealer: 1 coat.

National Aliphatic Acrylic H.B. : 2 coats. MISCELLANEOUS DATA

STORAGE The product must be stored according to National Regulations. The product should be kept in cool and well ventilated place, protected from heat and direct sunlight at temp 5-35ºC. Containers must be kept tightly closed.

HANDLING Handle with care, mix well before use. SHELF LIFE 18 months. SAFETY / HEALTH - Ensure good ventilation during application and drying.

- Avoid contact with skin and eyes. While painting it is advisable to wear eye protector. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes from skin; use soap and water or a recognized skin cleaner.

- Keep out of reach of children.

NOTE: We warranty the quality of our product and this data sheet represents test results and practical experience obtained under controlled conditions. We reserve the right to change data without prior notice.

PROTECT SEAL DESCRIPTION National Protect Seal has been specifically designed to meet the

requirements of durable, protective, water proofing membrane for concrete surfaces. It is based on Acrylic emulsion, with inert pigment and has good flexibility, abrasion and elastomeric properties. It contains anti-fungal and anti-bacterial additives.

RECOMMENDED USE Good mechanical and abrasion resistant properties, mostly suitable for curb stone, bridges, car parking areas, since it has excellent anti-carbonation, chloride ion stability, chemical resistance, suitable for concrete surfaces.

TECHNICAL INFORMATION Colors White and pastel colors. Finish Satin. Volume Solids 57 ± 2%

Specific Gravity KG/L 1.30 ± 0.05 Theoretical Spreading Rate 6 m2/Lit. per coat. Film Thickness (D.F.T.) 100 microns per coat (Depends on surface).

(W.F.T.) 175 microns per coat (Depends on surface). Drying Time @ 30ºC. Touch Dry: 30 min.

Recoatable: 8 - 10 hrs. Temperature, humidity, air movement and film thickness all affect the drying time.

Flash point Water base.

APPLICATION DATA Application Methods Brush, roller or spray. Thinning (Max. Vol.) 5% depending on the method of application. Thinning / Cleaning of Tools Water. Guiding Data for Airless Spray Nozzle Tip: : 0.017" - 0.020"

Nozzle Pressure: 2200 P.S.I. Conv. Spray Requirements Automizing Pressure: 30 - 40 P.S.I. Mixing Ration (Volume) Base : Hardener : N.A. Pot Life @ 30ºC. N.A. Recommended System

For metal, use suitable primer

National Acrylic Primer (W.B.) : 1 coat National Protect Seal : 2 - 3 coats. * Thick material can be applied by trowel, without dilution.

1/2

PROTECT SEAL

MISCELLANEOUS DATA STORAGE The product must be stored according to National Regulations. The

product should be kept in cool and well ventilated place, protected from heat and direct sunlight at temp 5-35ºC. Containers must be kept tightly closed.

HANDLING Handle with care, mix well before use. SHELF LIFE 18 months. SAFETY / HEALTH - Ensure good ventilation during application and drying.

- Avoid contact with skin and eyes. While painting it is advisable to wear eye protector. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes from skin; use soap and water or a recognized skin cleaner.

- Keep out of reach of children. NOTE: We warranty the quality of our product and this data sheet represents test results and practical experience

obtained under controlled conditions. We reserve the right to change data without prior notice. 2/2