novotest is manufacturer of devices and systems for non ......portable hardness testers. using this...
TRANSCRIPT
NOVOTEST is manufacturer of devices and systems for non-destructive testing.Today we design and produce instruments for measuring a wide range of
parameters and quality testing of the majority of products: hardness testers, ultrasonic flaw detectors and thickness gauges, coating testing instruments, devices for quality testing of construction materials, magnetometers, gauges for environmental control and many others.
HARDNESS TESTING • Portable Hardness Testers • Bench Hardness Testers • Hardness Test Blocks • Shore Hardness Testers
ULTRASONIC TESTING
• Ultrasonic Flaw Detectors • Transducers (UT-Probes)• Ultrasonic Thickness Gauges• Calibration and Reference Blocks
ULTRASONIC TESTING
• Ultrasonic Flaw Detectors • Transducers (UT-Probes)• Ultrasonic Thickness Gauges • Calibration and Reference Blocks
COATING TESTING• Adhesion Testing Instruments• Viscosity Meters• Devices for testing of Coatings on Metals• Instruments for Strength Testing• Enviroment Testing Devices
CONSTRUCTIONMATERIALS TESTING• Rebar Detector• Concrete Test Devices
MAGNETIC TESTING• Steel Structure Analyzer • Gaussmeter • Instruments for MPI and PT
– p. 4-13
– p. 14-21– p. 14-21
– p. 36-37
– p. 38-39
– p. 22-35
● More than 10 years on NDT market;
● Leading manufacturer of NDT devices in Ukraine;
● Representative offices in more than 30 countries around the world;
● Powerful development centre;
● Constant expansion of the product range;
● Manufacturing customized NDT systems;
● Solutions for non-standard NDT tasks;
● After-sales service and technical support;
● Individual approach for cooperation with dealers.
2 3
Unique device – the world’s irsthardness tester with photo-ixing ofmeasurements which allows to bindthe values of hardness to testedobjects with indication of a speciicplaceontheproduct!Hardness tester works as with
the UCI so with the dynamic (Leeb)probes.Usercangettheadvantagesofthetwomethodsofmeasurement–theseare themaximumpossibilities,whichcanbeobtainedfromaportabledevice.The device comes preconigured
formeasuringthehardnessofawiderange of materials – steel, alloyedsteels, stainless steels, non-ferrousmetals (aluminum, bronze, brass,copper,iron).
Several modes of displaying information areimplemented in thehardness tester, thesemodessubstantially increase the usability of the deviceanddesigned formaximum reliablemeasurementofhardness:
HardnessTesterNOVOTESTT-UD3canbeequippedwithawirelessprinterforexpress-printingofthemeasurementprotocol.
HardnesstestersNOVOTEST
aresuppliedinshockproofprotectivecases.
Standardsetincludesallnecessaryitemsforoperationwithhardnesstester.
ThedevicecomeswithspecialsoftwaretoworkonthePCwiththearchiveofmeasurements.
Sealed housing with rubber pro-tecting shockproof liningsmakes thedevice perfectly suitable for work intheworkshopandieldconditionswithhighhumidity,dust,etc.
Thehardnesstesterhasafrost-re-sistantdisplaythatallowsusertousethedeviceat any timeof the year inanyclimaticzoneoftheEarth.
HARDNESSTesting
Graph–themodeofbuildingthegraph;Histogram–themodeofbuildingthehistogram;Statistic–themodeofstatistics;Smart–themodeofilteringincorrectmeasurements;Signal–themodeofdisplayingthesignal(onlyforLeebprobe).
Leeb Probe ASTM A956 UCI Probe ASTM A1038
#1THE
FIRSTin the
WORLD!
BUILT-INCAMERA
Combined Hardness Tester NOVOTEST T-UD3
The built-in camera allows making photographsof the testing objectwith subsequent imposition ofthemeasuredvaluesofhardnessonitinarealtime.It implementsthemostreliableandclearmethodofloggingofmeasurements.
4 54 5
Dynamic Leeb probe is used formeasuringthehardnessofsteels,non-ferrousmetals,castiron, materials with coarse-grained structure,solidproducts.
UCI Hardness Tester NOVOTEST T-U3
Ultrasoniccontact-impedance(UCI)probeisusedformeasurementofhardnessofsmallproducts,objectswithathinwall,complexshapeswiththicknessfrom1mmandweightover0,1kg,formeasuringthehardnessofhardenedlayer’ssurface.
Theusingofdiamondindenterallowssetting the probe precisely in any tinypoint. The depth of the imprint left byHardness tester T-U3 is many timessmaller than imprint left by standardRockwell hardness tester, which makesthis method of measuring the leastdestructive.
ThereareavailableUCIprobeswithdiferentloads:10N,50N,98Nforhardnesstestingofdiferentsurfaceinishproducts.
Hardness tester NOVOTEST T-D3 usesdynamic method of hardness measurement– Leeb method, standardized according toASTM A956.
The method allows fast measurement ofhardness: it is necessary to set theprobeonthe surface of the testing object, press thereleasebutton,readthehardnessvalueofthedevice’sdisplay.
Themethodallowsmeasurementofhardnessof coarse materials (stainless steel, cast iron,etc.),productswithill-preparedsurface,massiveproducts–thismethodisperfectlycomplementstheultrasonicmethodformeasuringhardness.
UCI Hardness Tester NOVOTESTT-U3usesultrasoniccontact-impedancemethod of measuring hardnessstandardizedaccordingtoASTM A1038.
The method allows makingmeasurementsveryfastandeasy:installtheprobe,loadthespringforindentationtheindenterwithnecessaryload,readthehardnessvalueonthedevice’sdisplay.
Standard set of Hardness testerincludesDtypeLeebprobe,butitalsocanbeequippedwithDC,DL,D+15,C,G,Etypeprobes.
HARDNESSTesting
These advantages make Hardness tester T-U3perfectly suitable for solving the following tasks: hardnessmeasurements of products with complicated shape, ine-grained materials, heat-treated materials, thin layers andcoatings, parts with surface hardening, thin-walled pipes,thesmalldetails,etc.
NOVOTEST T-D3 makes automaticcalculationofhardnessforawiderangeofmaterials-steel,stainlesssteels,castiron,bronze,aluminum,whichallowscallingthishardnesstesteroneofthemostuniversal.
Leeb Hardness Tester NOVOTEST T-D3
6 7
Combined hardness tester ofmetalsNOVOTESTT-UD2is a multipurpose device of rapidnon-destructivetesting.
Hardness tester NOVOTESTT-UD2isidealforsolvingthefollowingtasks:• Testingofhardnessofferrous andnon-ferrousmetals;• Testingofhardnessofcastiron andvariousalloys;• Determiningthetensilestrength ofcarbonsteelproductsfrom pearliteclass.
Hardness tester NOVOTEST T-U2 usesultrasonic contact-impedance method ofmeasuringhardnessstandardizedaccordingtoASTM A1038.
UCIprobeisusedformeasuringthehardnessof small products, objects with a thin wall,complex shape, to measure the hardness ofsurfacehardenedlayers.
Shore Durometer NOVOTEST standardizedaccording to ISO-7619 and ISO-868, DIN53505,ASTM D2240andJIS K7215.
UCI Hardness Tester
NOVOTEST T-U2
UCI Probe Test Stand
NOVOTEST
It istheaccessoryunitforportableNOVOTEST hardness testers (T-U2,T-U3,T-UD2,T-UD3),whichisspeciallydesignedforUCIprobe.
Hardness test blocks Rockwell (HRA,HRB,HRC),Brinell (HB),Vickers (HV)andLeeb(HLD,HLG)aredesignedforcheckingmeasurement accuracy and calibrationof bench or portable hardness testers ofmetals.
Hardness Test Blocks
NOVOTEST
HARDNESSTesting
Leeb Hardness Tester
NOVOTEST T-D2
Shore Hardness Test Blocks NOVOTEST
Dynamic Leebprobe is used formeasuringthe hardness of non-ferrousmetals, cast iron,materials with coarse-grained structure, solidproducts.
Hardness tester NOVOTEST T-D2 usesdynamic method of hardness measurement– Leeb method, standardized according toASTM A956.
Leeb Probe
ASTM A956
UCI Probe
ASTM A1038
Combined Hardness Tester
NOVOTEST T-UD2SHOCK-PROOF
COVER
PRICE-SPECIFICATION
RATIO
Shore Durometer
NOVOTEST TS-A (analog)
TypicaltestingobjectsofShoreDurometerare:softplastic,printedcircuitboards,glass,elastomers,ibers,softrubber,leather,resin,wax,butyl,silicone,vinyl.
ShoreAandShoreDblocksaccording toISO 7619-1-2009andISO 868-85
UCIProbeTestStandNOVOTESTisusedforixationofsmall,thinproducts(evenless1mm)during tests. It makes testing more accurateandmoreconvenientforusers.
Shore Durometer
NOVOTEST TS-C (digital)
FIRST BEST
8 9
RockwellHardnessTesterNOVOTESTTB-RisdesignedinaccordancetoISO 6508-2,ASTM E18forhardnesstestingofproductsmadeofvariouskindsofsteels,suchascastiron,temperedcastiron,allsortsofalloysandotherkindsofmetals.AlsoitisusedformanufacturingofRockwellcalibrationtestblocksforportablehardnesstesters.
DigitalBrinellHardnessTesterNOVOTESTTB-B-CBrinellhardnesstesterisreliableandeasyinoperation,isusedforhardnesstestingofbiggrainmetalproducts(castedparts,non-ferrousmetalsandalloys), various temperedandhardened steels, samples fromsoftmetals (pure aluminum,lead,tin)andothers,accordingtoISO 6506-2,ASTM E10.
Digital Brinell Hardness Tester
NOVOTEST TB-B-C
HARDNESSTesting
Analog Rockwell Hardness Tester
NOVOTEST TB-R
NOVOTEST TB-R implements direct Rockwellmethodofhardnesstesting,which isbasedonthetestingofsamplesforresistancetopenetrationofin-denterwithcertainload–themostcommonlyusedhardnesstestmethod.
The hardness tester is equipped with large andsmalllat tables,andV-shapeanvilwhichareusedfortestingofobjectswithdiferentshapes.
NOVOTEST TB-R is reliablemachine, and alsoveryeasyinoperationandservicing.Itworkswithoutpowersupply.
Features:
• Operationwithoutmicroscope;• Simpleandreliabletester,veryeasyinoperation;• Workswithoutpowersupply.
ItalsocanbeusedforproductionofBrinellhardnesstestblocks.
The machine has tungsten carbide ball indenter,usingheavytestingforce(largeindentation),itprovideshighlyaccurateandrepeatablemeasurementresults.
Features:
• Automaticloadingandunloading;• 10testingloadsandscales;• Includessmall,largelatandV-shapetables;•Canbeequippedwithexternalanalogmicroscope orautomaticcamerameasuringsystemwith PCsoftwareforanalysisoftheimprints.
COMMONLYMOST
USED
10 11
Analog Brinell, Rockwell, Vickers Hardness Tester
NOVOTEST TB-BRV
Brinell,Rockwell,VickersHardnessTesterisdesignedtoISO 6508,ASTM E 10,ASTM E92,ASTM E18,ASTM E384,ASTM E103forhardnesstestingofferrous(steel,castiron,lowcarbonsteel and tempered steel, etc) and non-ferrousmetals (aluminum, copper, etc), hard alloys,carbonizedandchemicallytreatedlayers.
Digital Micro Vickers Hardness Tester NOVOTEST
TB-MCV-1A
HARDNESSTesting
NOVOTEST TC-MCV-1A is designed according to ISO6507-2,ASTM E384 for hardnesstesting of carburized and nitride layers, surface hardened layers, hardness of the coatings;ceramic,steel,non-ferrousmetalproducts;sheets,metalfoils,platings,smallandthinobjects(from25μm).Thehardnesstesterhasabuilt-inmicroscopeformeasuringdiagonalsofimprintsandautomaticallycalculateshardnessvaluesintodiferentmicroVickersscales.
ThehardnesstesterimplementsRockwell,BrinellandVickershardnesstestingmethods,whichmakesitauniversalandmulti-functionalmachine.
NOVOTEST TB-BRV has an electric actuator– themain test load is completely automated. Theinstrumentalsoallowsmaximizeeiciencyofusingportablehardnesstesters.Usingthisdeviceusercancheckorproducestandardhardnesstestblocks tocalibrateportablehardnesstestersaccordingtoanyofthemostpopularhardnessscales(HRC,HB,HV).
Features:
• Rockwell,Brinell,Vickersmethods;• Suitableforanymetals;• 37.5Xand75Xmicroscope;• Includessmall,largelat,V-shape andmovabletables.
Themachineallowsusertomaximizetheeiciencyoftheusingportablehardnesstesters,especiallyUCIhardness testers, because TC-MCV-1A implementsdirectmethodofhardnessmeasuring.
Features:
• VickersandKnoopindenters;• Automatichardnesscalculation;• LargecontrastLCDdisplay;• Automaticloading,dwellunloading 10xand40xmicroscope;• Movabletable;• Canbeequippedwithautomatic measuringsystemandPCsoftware.
PRECISION
HIGH
MACHINEHARDNESS TESTERUNIVERSAL
12 13
Distance-Amplitude
Curves (DAC)Various color themes
Real-timeB-scan mode
NOVOTEST UD2301 user interface
Ultrasonic Flaw Detector NOVOTESTUD3701isdesignedfornon-destructivetest-ingofqualityofmetals,plastics,glass,com-positematerials, weld inspection andmea-suringthethicknessofvariousproductsandconstructions.
In contrast to standard type UD3701,UltrasonicFlawDetectorNOVOTESTUD2301ismadeinminiaturehousing,optimalinsizeforperformingtestingintightspacesandoperationin the ield. At the same time law detectorequippedwithaclearcolordisplaywithhighresolution 480x320 pixels, which signiicantlyimprovestheusabilityofthedevice.
Flaw detectors can be equipped withvarious ultrasonic and electromagneticacoustictransducers.
Flaw detector enables to detect defectssuchasdiscontinuitiesandheterogeneityofmaterials insemi-inishedproducts,inishedproducts and welded joints, measure thedepthandthecoordinatesofdefectsdepth,measurethethicknessoftheproducts,mea-surethevelocityofpropagationandattenua-tionofultrasonicluctuationsinthematerial.
UT-probes
The law detector display can operate inanyorientation–all4options,displayrotationby90degreesallowsusertoconigurethede-viceattheleft-handedandright-handed,thedisplaycanbeusedinportraitandlandscapeorientation.
ULTRASONICTesting
Ultrasonic Flaw DetectorNOVOTEST UD3701
Ultrasonic Flaw Detector NOVOTESTUD3701allowsnotonlytocarryoutthetest-ingforpresenceofinternaldefects,butalsoto measure the thickness of products withhighaccuracy.
Works with
EMA probes
Ultrasonic Flaw Detector NOVOTEST UD2301
UltrasonicFlawDetectorNOVOTESTUD2301withcolordisplayandminiaturedimensionsisthebestchoiceforexpertultrasonictesting.
Powerful, lightweight and portablelaw detector in ergonomic shockproofhousing with protective rubber treads –contemporary industrial design of lawdetectorforgeneralpurposes.Devicehassuchfunctionsas:AFS,TVG,DAC,DGS,A-scan,B-scan,etc.
Thelawdetectorallowsuser tosolvea wide range of tasks – from thicknessmeasurements of thin products, to large-sizedcastinglawdetection.
7"NEW
TOUCHSCREEN
Works with
EMA probes
PORTABLE
COMPACTDEVICE
14 15
Ultrasonic CalibrationBlocks NOVOTEST
Ultrasonic Reference BlocksNOVOTEST
Weproducestandardreferenceblocks(V1,V2,etc.) according to ISO, DIN and other standards,which are used for calibration ultrasonic lawdetectorsandUT-probes.Samplesaremadefromlowcarbonine-grainedsteelwithasmalldampingcoeicient.
Custom made calibration blocks with notches(corner relectors)aremadeof thesamematerials(steel,stainlesssteel,aluminumandothers)asthetestedobjects,whereinthegeometry(thicknessandsurface radius of standard sample) has the samecharacteristicsastesteditem.
ULTRASONICTesting
Thickness GaugeCalibration Blocks NOVOTEST
Calibration blocks are used to conigure thesensitivity and duration of scan of ultrasonic lawdetectorsduringtestingofvariousproducts(mainlylatsheetsandpipes).
UltrasonicPhasedArrayFlawDetectorisdesignedfortestingofmetalandcompositeproducts,pipelinewelds, forgingsandcastings,aircraftobjects,corro-sion inspection, etc. in accordance toEN 12668-1, ISO 18563-1.
NOVOTEST UD4701PA can be used both withstandard1 channel transducers andPA16 channelprobes.UsingSAFTmethodthedeviceallowstogethighresolutionandqualityimageofscanning.Usingreplaceableprisms,allowstoavoidwearofthetrans-ducersandinspectanycurvedsurfaces.
Basedoninnovationtechnologies,thedevicehaslightweight(1,5kg)andincludessuchfunctions,asA,B,C,D,S,L-scan,TOFD,DAC,DGS,AFS,AWSmodes, automatic calibrationof ultrasonic velocity,reconstruction mode of weld joints geometry andothers.
Scanning with 16 channelPA probe
S-scan and L-scan
Measuring relative dimensions of the defects using marker
Phased Array Flaw Detector NOVOTEST UD4701PA
These blocks are used for checking themeasurementaccuracyandcalibrationofthicknessgauges.Thereareavailablediferentmetricversions,forexample,withstepsfrom1mmthrough10mm,from2mmthrough20mmorfrom10mmthrough50mm,etc.
The blocks can be produced in accordance with diferentstandards,suchasASTM E-797,etc.fromsteel,stainlesssteel,aluminumandothersmaterialsarealsoavailable.
PHASED ARRAY
NEW
SYSTEM
16 17
ThethicknessgaugeUT-3K-EMAisdesignedforuseinindustrialnetworks,sheetmetalprod-ucts,rodsandotherproductsmadeofsteel,aswellasaluminumandothermetals,withoutusingofcouplant,withoutpreliminarysurfacepreparation,withspacebetweentheprobeandmetalupto3mm.Asagapmaybealayerofrust,alayerofsaltdepositsorothernon-conductivecoating(paint,varnish,enamel,plastic).
ULTRASONICTesting
Pulsedelectro-magnetictechnology implemented intheEMAtransducersallowsusertoputtheprobenotexactperpendicularytothesurface,butupto25degreesofskewandgetcorrectreadings.
Thickness GaugeNOVOTEST UT-3K-EMA
Thickness GaugeNOVOTEST UT-3A-EMA
NOVOTEST UT-3A-EMA is designed to measure thicknessofobjects, suchaspipes, tanks,sheetproducts, shipbottomsandotherparts,madeofmetalsandalloys,withoutapplicationofcouplantandadvancesurfacepreparation,throughairgaporalayerofrust,dirt,saltorothernon-conductivecoatings(paint,varnish, enamel, plastic, etc.) up to 6 mm. Also it is used forevaluationofanisotropydegreeofthematerial.
The device has a bright contrastLCD display, A-scan, B-scan, calibra-tionsettings,threethicknessmeasure-mentmodes:• Automatic;• Manualmode,measurements aremadeusingmaximuminthe irstgate;• Manualmode,measurements aremadeusingtwomaximums intwogates.
Thereadingsofthedeviceareslightlyafectedbyskew,incontrasttotraditionalthicknessgaugeswithpiezoelectrictransducers,whichrequireixationoftheprobeinacertainposition.ThethicknessgaugeUT-3K-EMAusesaspecialdataprocessingalgorithmthatallowsthethicknesstobemea-
sured correctly in the presence of dis-turbingfactorssuchasmetalanisotropy,the presence of several relectors, andthe presence of external interference.Thealgorithmdevelopedbyourspecial-ists allows to reduce the human factorandsimplifytheinterfaceofthedevice.
Connecting a tablet, smartphoneorotherdevicebasedonAndroidOSallowsusertoexpandthecapabilitiesoftheUT-3K-EMAthicknessgaugetothe level of a modern law detector,with the ability to display and saveA-scan, B-scan, the ability to workwith strokes, choose the thicknessmeasurement mode, parameterssignalprocessing,etc.
COATINGTHROUGH
TESTING
USB
CONNECTION
18 19
PortableUltrasonicThicknessGaugeNOVOTESTUT-1Misdesignedforrapidnon-destructivetestingof thicknessofobjectsandconstructionsmadeofdiferentmaterials.
It is used for testing the thickness of:
• Objectsofvariousalloysofmetals;• Objectsofnon-metallicmaterials- composite,glass,plastic;• Hullparts,sheets,vesselwalls;• Transportationandbridgedesign, includingcorrosiondefects(scale,rust);
Advantages:
• Thedevicehasshock-proofrubber protectivecase;• CanbecreatewithanyUT-probes withLemo00connectoroncable;• Storageofmeasurementresults.
Thicknessgaugescanbeequippedwithdiferentultrasonictestingprobes:2,5MHz,5MHz,10MHzandvariouscalibrationblocks.
Uniqueprotectionagainstdustandmois-ture,previouslynotavailableinthemarket.Bydefaultthedevicecomeswithadegreeof dust-moisture protection IP65. The de-vicecanbesuppliedwithreinforcedprotec-tionuptoIP67(submergedinwater).
ULTRASONICTesting
Thickness GaugeNOVOTEST UT-1M-IP
Ultrasonic Thickness Gauge NOVOTEST UT-1M
Unprecedentedautonomyofthedevice-thetimeof continuous operation of the thickness gauge in-creasedto200hours.
Special rubber lining on the side surfaces of thecasingfacilitatestheconvenientretentionofthethick-nessgaugeintheoperator'shand.
Lightweightandsmalldimensions,incompari-sonwithsimilarprotectedthicknessgauges.
UP TO
MOISTUREDUST&
PROTECTION
IP67
20 21
Cross Hatch Adhesion PlateNOVOTEST AH-16276
AdhesiontesterAP-4219isdesignedtomea-sure theadhesivestrengthvalueof thecoatingson diferent structures, as well as to determinetheadhesionvalueofpolymeric insulating tapeswhicharegenerallyusedforpipesinsulation.
Adhesion tester CM-4219 is a device formeasuringtheadhesionvalueofbitumenpipeinsulationandotherinsulatingcoatingswhicharebasedonbitumen.
The instrument is designed to measure theadhesion value of coatings in compliancewithISO 16276-2 andASTM D 3359.
Bitumen And Mastic InsulationAdhesion Tester NOVOTEST CM-4219
Peel Adhesion TesterNOVOTEST AP-4219
Cross Cut Adhesion TesterNOVOTEST AN-2409
COATINGTesting
Mechanical pull-of typeadhesion tester is designedfor measure the adhesionvalue of paints and othercoatings on base and be-tweenlayersorcohesivema-terialsaccordingtoISO 4624,ISO 16276-1 andEN13144.
Tensile Adhesion TesterNOVOTEST AC-4624
AdhesionMultibladeKnifeNOVOTESTAN-2409is designed for adhesion testing by method cuts(parallel or lattice) with thickness range of paintcoatingsup to200µs,according to ISO 16276-2,DIN 53151,ASTM B 335,ASTM D 3002,ISO 2409,NF T 30-038, ASTM B 3359, BS EN ISO 2409,
BS 3900-E6.Devicecanbeusedonlatandcurvedsurfaces.
22 23
ViscosityDipMugisusedtodeterminetheconvection-alviscosityofthedispersionpolyvinylacetate homopoly-mercoarsedispersion.
Thedeviceisacylindricalbrass vessel with a handleand three oriices, two ofthemarelocatedatthesidewallof thecylinder,and thethird – at the centre of thebottom.
DensitytesterNOVOTESTP-2811isdesignedaccordingtoISO 2811-1.
The density is calculated asweight dividedintovolumeoftestedliquid.
Availablemodelsmadefromaluminiumandstainlesssteel.
Density Cup NOVOTESTPYCNOMETER P-2811
Viscosity cups – testing de-vices that intended for mea-surementofrheologicalcharac-teristicsofliquidsubstances.
Viscosity low cup – is oneof the fundamental parametersmeasuring tool for consum-ables.It isusedtotestthevis-cosity of applicable liquids, asvarnishes, paints, oils, liquidinks,andothers.
The instruments can be pro-ducedinaccordancetodiferentstandards.
Available in two models:submersible and with a tri-pod, which are made fromaluminum or stainless steel.
Viscosity Flow CupNOVOTEST VZ
Viscosity Flow CupNOVOTEST VZ-P
Main standards forviscosity cups funnels are:DIN 4 (DIN 53211-87) andUNE
ISO DIN 2431.For American products there
are the appropriate standards:funnel FORD (ASTM D 120087)andZHAN(ASTM D4212-93).
Viscosity Dip MugNOVOTEST VMS
COATINGTesting
24 25
COATINGTesting
Coating Thickness Gauge NOVOTEST TP-1M
Coating thickness gauge is aprecisionmeasuringinstrumentforrapidnon-destructive testing of coatings inaccordancewithstandardISO 2808.
CoatingThicknessGaugeNOVOTESTTP-1M can be equipped with variousprobes for diferent tasks and standardsamplesofvariousthicknesses.
Usercaneasyconnectanotherprobefortestingofotherkindofproducts.
Coatingthicknessgaugeisdesignedtotest:• Thicknessofpaintandotherdielectrics–radioabsorbing,mastic,telon,plastic, electroplatingcoatingsonsteel;• Thicknessofgalvanicandpaintcoatingsonnon-ferromagneticalloysandnon-ferrousmetals;• Thicknessofbitumenandotherthickcoatingsonvariousmetalsandalloys;• Aswellasrelativehumidity,airtemperature,surfacetemperature,dewpointtemperatureanddiference betweensurfaceanddewpointtemperatures;• Measuringgroovesandsurfaceroughness.
Electronic coating thicknessgauge–devicewhichwidelyusedin shipbuilding and automotiveindustriesformeasuringofthecoatingsonmetals,inordertotestthequalityofproducts,alsoitusedfordeterminingtechnicalconditionofthetestedobjects.
METALBASES
FOR
26 27
Pulse Holiday Detector NOVOTEST SPARK-1
COATINGTesting
Coating Thickness Knife TesterNOVOTEST TPN-2808
Analog Surface Profile Gauge NOVOTEST LIMIT
MechanicaldepthgaugeisdesignedaccordingtoASTM D 4417-B,SANS 5772,US Navy NSI 009-32,US Navy PPI 63101-000.
Paint inspection gauge TPN-2808 is designedaccordingtoISO 2808,ASTM B 4138,DIN EN 1071-2tomeasurethethicknessofbothsingleandmultiplelayercoatingsonanygrounds,bothmetallicandnon-metallic.
It is used for (dependingon coniguration): measuresthe peak-to-valley heightof a blast cleaned surface;measurement the depth offocal corrosion; measuresdepth of narrow holes andgrooves.
The electrolytic law detector(detectorofporosity)NOVOTESTED-3Disdesignedforrapidnon-destructivetestingofcontinuityof coating thickness up to500μminaccordancewithstandardASTM G62-A.
Pinhole DetectorNOVOTEST ED-3D
Theoperationprincipleofdeviceisbasedontheixationthebreakdownoflocationsbetweentheirstelectrodewhichis connected to the high-voltage source and the secondelectrode,which isconnected to thepipe (orother testingobjects).
Pinholedetectorisintendedfortestingofporosity,notdyedplaces,andotherviolationsofthecontinuityofprotectivedielectriccoatingsonthemetalobjects.
NOVOTESTSPARK-1isdesignedaccordingtoASTM G62-
07,ISO 2746:1998 & AS3894.1-2002, ANSI/AWWAC214-07,ANSI/AWWA C213-07,ASTM D4787-08,NACE RP0274-
2004,NACE RP0490-2007,NACE SP0188-2006fortestingthecontinuityofinsulationcoatings(polymer,epoxy,bitumen,etc.)ofpipelines(oil,gas,etc.)andotherproducts.
FOR ANY
BASES
ALMOST
28 29
COATINGTesting
Dew Point MeterNOVOTEST KTR-1
Grindometer NOVOTEST M-1524
DewPointMeterNOVOTESTKTR-1isdesignedforrapidtestingofairtem-perature and humidity, dew point cal-culationandsurfacetemperaturemea-surementbynoncontactmethod.
Dew point meter measures: rela-tive humidity, air temperature (-10 to+60°C),thesurfacetemperature(-20to+380°C).
And calculates: dew point, the dif-ferencebetweenthedewpointandthetemperatureofthesurface.
The instrument isdesigned todetermine thehardnessofcoatingsbypencil leadsaccordingto:ASTM D 3363,EN13523-4,ISO 15184:2012,ECCA T4,JIS K 5600-5-4.
The instrument isused todetermineparticlesizeandinenessofgrind fordiferentmaterials,suchaspaints,inks,coatings,chocolatesandothersimilarproducts.
NOVOTEST M-1524 is designed in accordance with:ASTM D 1210, AS/NZS 1580.204.1, DIN 53203, EN 21524,
FTMS 141 4411.1, ISO 1524, JIS K 5600-2-5.
Pencil Hardness Tester NOVOTEST PH-3363
Buchholztesterisusedforhardnessmeasurementsofcoatingsusingtheindentationmethod(bevelleddiscofsteelblockwithconstanttestload).
BuchholzCoatingHardnessTesterNOVOTESTBH-2815isstandardizedaccordingto:DIN 53153,ISO 2815,BS 3900-E9,NF T30-052.
Buchholz Coating Hardness Tester NOVOTEST BH-2815
Film applicator AU-823 is designed for applyinglayers of paint and other materials with requiredthickness of the plate during the complex testsaccordingtoASTM D 823-E.
Film Applicator NOVOTEST AU-823
30 31
Device is used for determining the adhesion andresistance to damage by scratching method. Thedevice complieswith the requirements ISO 12137-1,ASTM D 5178,ASTM D 2197.
COATINGTesting
Scratch Hardness Coating Tester NOVOTESTSH-1518(balltype)isusedforhardnesstestingofcoatings(paint,mastic,plasticandothers)throughdeterminingthehardnessresistancetoindentationoftheballtipwith1mmdiameter.
Scratch Hardness Coating TesterNOVOTEST SH-1518
Scratch Adhesion Tester NOVOTEST C1-5178
NOVOTESTSH-1518 isdesignedaccordingtoISO 6441.Alsoitusedforanalysistheresistanceofthecoatingforscratching(ISO 1518).
Erichsen CuppinngTester NOVOTEST SE-1520
Erichsen Cuppinng Tester isdesigned for testing of elasticityand strength of coatings withcup-shaped curve, according toISO 1520, ISO 20482:2013.
The Ericksen’s device is used for determining the strength of the coating at theindentationofsphericaltippunchwithdiameterof20mminthecoatingofthesample,thepositionofwhichisixedonamatrixwithinternaldiameterof27mm.
Impact TesterNOVOTEST STRIKE-U6272
NOVOTEST STRIKE-U6272is designed for determining thestrength of the ilm during theimpact.
Constructionoftheinstrumentismade in accordancewithmodernrequirements of ISO 6272-2002
andISO 21809.The device is used for testing
ofmetals,plastics,parquet,wood,ceramics, glass, concrete andscreed.
32 33
ThedevicecomplieswithISO 1519-73,DIN 53 152andappliestopaintsandspeciiesamethodfordeterminingtheelasticityoftheilmbybending.
Thedeviceallowstomeasuretheelasticityandstrengthofcoatingsthroughbendingthemetalplatewithtestedcoatingaroundasetofcylindricalrodswithdiametersfrom2mmto32mm.
The NOVOTEST BEND-6860 is used to determinetheelasticityor resistance, adhesionandelongationofcoatingson sheetmetal in accordancewith ISO 6860,
ASTM D 522-A, BS 3900-E11, ECCA T7.
The NOVOTEST BEND-H1500 is designed for determining the elasticity, adhesion,crackingofpaintcoatingsonsamplesinaccordancewithASTM D 522-B, ASTM D 1737,
AS/NZS 1580.402.1, BS EN3900-E1, DIN 53152, ISO 1519-1, NF T30-040, JIS K 5600-5-1.
Thedevicefortestingtheelasticityandstrengthofthecoatingsduringbendingaroundasetofcylindricalrods,withdiametersofrodsfrom1mmto20mm.
Bending Coating TesterNOVOTEST BEND-H1519
Bending Coating Tester NOVOTEST BEND-M1519
Bending Test Conical MandrelNOVOTEST BEND-6860
Bending Coating Mandrel TesterNOVOTEST BEND-H1500
COATINGTesting
NOVOTESTBEND-H1519complieswithISO 1519-73,
ASTM D 522, ISO6860 which applies to paints andvarnishesanddescribebymethodfordeterminingtheelasticityoftheilmbending.
The sample is clamped against a conicalmandrelandisbentaroundthemandrelbyarollermountedonahandoperatedlever.
The diameter of the mandrel at the pointwherethecoatingofthesamplestartstocrackcan be determined from a scale (3-37 mm)markedonthesampleclamp.
34 35
CONSTRUCTIONMATERIALSTesting
Ultrasonic Tester of BuildingMaterials (Concrete) StrengthMeterIPSM-U+T+Disdesignedforrapidnon-destructivetest-ingofstrengthofconcrete,compositebricksandotherbuild-ingmaterials.ThedevicecomplieswithEN 12504-4,ASTM C
597-02, ISO 1920-7:2004, IS13311, CECS 21standards.Ultrasonicdeviceallowsmeasurementstrength
with surface sounding and through soundingmethodsbymeasuringtherateandtimeultrasonicwavepropagationintestedobjects.
NOVOTESTIPSM-U+T+Disdesignedforde-tectingvoids,cracksanddefectsthathavearis-enduringmanufactureandoperationandmea-suringthedepthofcracksindiferentobjects.
Thedevicehasbuilt-inmemoryandtheabilitytotransmitsavedmeasurementstoPC.
Also ithas:modeof thesignalvisualization (A-scan), theabilityof testingconcrete (andother)constructionsforinternaldefectsanddiscontinuities,alsoincreasestheaccuracyofmeasuringtimeintervalsbymanualtimingofthemomentactivationofmeasurer.
Thedevicecanbeequippedwithsurface-soundingprobeor/andprobesforthrough-sounding.
Concrete rebound Schmidt hammer isdesignedforstrengthtestingofconcreteandotherbuildingmaterialsthroughim-pactingmethod,which is correspondwith ASTM C 805; ASTM D 5873;
DIN 1048;ENV206;EN 12 504-2;ISO /DIS 8045.
Concrete Cover Meter NOVOTEST Rebar Detector
Concrete Rebound SchmidtHammer NOVOTEST SH
ConcreteCoverMeterNOVOTESTRebarDetectorworksinamodeofconstantscanningofthetestsurface.Foreasyoperationwiththe
device, it has a function ofsoundsearch.Increasingthefrequencyoftheaudiosignalindicates the oncoming ofthe probe to the reinforcingelement that allows user towork without continuousmonitoringofdevicesdisplay.
Basic functions:
●Measuringthedepthofreinforcementanditsdiameter;●Identiicationofareasfreeofreinforcementstructures;●Operativecontroloverthequalityofreinforcementofreinforcedconcretestructuresandproductsbymagneticmethodsinconstruction,onenterprises;●Controlofphysicalandtechnicalcharacteristicswhenexaminingtheintegrityofbuildingsandstructures.
Strength Meter NOVOTEST IPSM-U+T+D(Pulse Velocity Tester)
Thedeviceisdesignedforrapidnon-destructivetestingofreinforcedconcreteproductsandstructuresinaccordancetoBS 1881,Part 204,DIN 1045,DGZfP B2,SN 505262,SS 78-B4.NOVOTEST Rebar Detector operates on technology of magnetic ields and is used for
technologicaltestingatbuildingsandfactories,aswellastheplannedexaminationofvariousstructuresandbuildings.
36 37
Gaussmeter (magnetometer) NOVOTEST MF-1
GaussmeterNOVOTESTMF-1isaversatileandhighlyaccuratediagnosticdevicethatoperatesontheprincipleofHallefect.
MagnetometerMF-1isusedfor:determinationofcomplianceofequipmenttorequiredspeciicationsandthepossibilityoffurthertesting,testingofthelevelofinductionieldsoftestedobjectandcomponentsordevicesduringthediagnostic
Magnetic law detectoris based on the method ofnon-destructive testing usedfordetectingviolationsof themagnetic surface of metalstructures and structures offerromagneticmaterials.
Steel Structure Analyzer (structurescope)isdesigned for non-destructivequality testingof chemical-thermal, thermal and thermo-mechanicaltreatments.
SteelStructureAnalyzerallowstodeterminethe mechanical properties and hardness ofmetalsandto test the ferromagneticproductsifthereareanycorrelationsbetweentestedpa-rameters.
MagneticTestBlocksareusedtocheckthesensitivityofmagneticparticleandpenetrantinspectionmaterials.
Samples are available with diferent size of cracks,surface and subsurface defects and longitudinal andtransverseindications.
Magnetic Test Blocks NOVOTEST
Steel Structure AnalyzerNOVOTEST KRC-M-2
MAGNETICTesting
In addition, thedevice is used fortesting the surfacelayers of ferromag-netic materials andthe metal for pre-sortingsteelgrades.
work with the method of magneticparticle, testing of level of residualmagnetization, level of industrialnoise,levelofmagneticields.
Magnetic Flaw Detector (Permanent Magnetic Yoke) NOVOTEST MPD-DС
Incaseofthebanregulationsoftheequipmentwithpowersupply, ordiicultieswith its supply,Magnetic FlawDetectorNOVOTESTMPD-DС is the only one instrument for the re-quiredtesting.
38 39