november 2018 new zealand - jameshardie.co.nz · rab™ board secura™ exterior flooring secura™...

Product Identification Guide November 2018 New Zealand 1

Product Identification GuideNovember 2018 New Zealand

jameshardie.co.nz

2 Product Identification Guide November 2018 New Zealand

Products

Exte

rior A

pplic

atio

nsW

all C

ladd

ings

Exte

rior B

raci

ng S

yste

ms

Soffits

Cav

ity B

atte

n

Rig

id A

ir B

arrie

r/Pr

e C

ladd

ing

Dec

ks

Inte

rior A

pplic

atio

nsLi

ning

s D

ry/S

emi W

et A

reas

Lini

ngs

Wet

Are

a

Und

erla

y

Stru

ctur

al F

loor

ing

Wet

/Dry

Are

a

Inte

rior B

raci

ng S

yste

ms

Cei

lings

ARChitectural™ Inraw™ Panel ●ARChitectural™ Invibe™ Panel ● ●Axent™ Fascia ●Axent™ Trim ● Axon™ Panel ● ●CLD™ Structural Cavity Batten ●EasyLap™ Panel ●Eclipsa™ Eaves Lining ●ExoTec™ Facade Panel ● ●*

HardieFlex™ Eaves Lining ●HardieFlex™ Sheet 6.0mm ● ● ●HardieFlex™ Sheet 7.5mm ● ●HardieGlaze™ Lining ● ● ●HardieGroove™ Lining ● ● ● ●HardiePanel™ Compressed Sheet 18mm ● ●HardieSoffit™ Lining ●HomeRAB™ Pre-Cladding ● ●James Hardie™ Weatherboards 7.5mm ●Linea™ Weatherboard 16mm ●Linea™ Oblique™ Weatherboard ●Monotek™ Sheet ● ●RAB™ Board ● ●Secura™ Exterior Flooring ●Secura™ Interior Flooring ●Stria™ Cladding ● ●*

Titan™ Facade Panel ● ●*

Tile and Slate Underlay ●Villaboard™ Lining ● ● ● ● ●

*Titan™ and ExoTec™ Facade Panels, EasyLap™ Panel and Stria™ Cladding achieve bracing when used in conjunction with the RAB™ Board. TM and ® denotes a trademark or registered mark owned by James Hardie Technology Limited. Copyright James Hardie New Zealand November 2018.

Product identification and applicationWhat they are called and how to use them


1 Who we are and what we do 4

2 Why choose James Hardie? 5

3 Create the look you want 6

4 Pre-Cladding 7

HomeRAB™ Pre-Cladding 7

RAB™ Board 8

5 Weatherboard 9

James Hardie™ Weatherboards 9

Linea™ Weatherboard 11

Linea™ Oblique™ Weatherboard 14

Axent™ Trim 17

Axent™ Fascia 17

6 Panel 18

Axon™ Panel 18

EasyLap™ Panel 21

HardieFlex™ Sheet 23

Stria™ Cladding 25

Titan™ Facade Panel 28

ExoTec™ Facade Panel 31

7 Monolithic 34

James Hardie™ Stucco Solution 34

Monotek™ Sheet 35

8 Internal linings 37

HardieGroove™ Lining 37

Villaboard™ Lining 39

9 Prefinished linings 42

HardieGlaze™ Lining 42

Inraw™ Panel 47

Invibe™ Panel 49

10 Eaves and soffits 52

HardieFlex™ Eaves Lining 52

HardieGroove™ Lining 54

HardieSoffit™ Lining 56

Villaboard™ Lining 58 Eclipsa™ Eaves Lining 60

11 Flooring 61

HardiePanel™ Compressed Sheet 61

Secura™ Interior Flooring 62

Secura™ Exterior Flooring 63

Tile and Slate Underlay 64

12 Fire and acoustic 65

13 Tools 65

14 Product and coverage quantities 66

Contents


We are rethinking the way modern homes and commercial spaces are designed and built.James Hardie is an international building product manufacturer and a global leader in fibre cement products. Now operating in its 130th year, the company continues to challenge convention within the construction industry and leads the way in delivering innovative building products and solutions.

James Hardie have been providing Kiwi customers with smart building products made right here in New Zealand for our conditions for 80 years. Our fibre cement products are industry leading and are recognised globally for their beauty and durability.

Linea™ Weatherboard was developed, manufactured and perfected right here in New Zealand. It’s a proven product that has been used by builders for the past 16 years and is now offered in overseas markets.

With James Hardie building products, you have the opportunity to develop your own style, using one of the most space efficient and durable building materials available.

1 Who we are and what we do

We value your feedbackTo continue with the development of our products and systems, we value your input. Please send any suggestions, including your name, contact details, and relevant sketches to:Ask James Hardie™ [email protected]


2 Why choose James Hardie?

James Hardie building products provide a complete solution for creating well designed homes. Available in numerous profiles and finishes for a range of interior and exterior building applications, James Hardie products work well on their own or in unison with one another.

James Hardie products are used extensively in new residential construction, renovations and additions, as well as a variety of commercial and industrial applications.

When installed and maintained correctly, James Hardie products are fire resistant, deemed non-combustible and are resistant to damage from moisture and rotting. They are resistant to cracking and warping so hold paint well, extending the time before repainting. With minimal maintenance such as periodic wash downs, you can keep your home looking new.

They’re ideal for New Zealand lifestyles, climates and building designs. We’ve created the durable alternative to traditional construction materials, leading the world in pioneering the technology for fibre cement building products.

For CAD drawings, visit www.jameshardie.co.nz.

Fireresistant

Resistant to damage

from rot

Resistant to damage

from moisture

Weatherresistant

We believe in well designed products and well designed homes.


3 Create the look you want

FlooringHardiePanel™ Compressed SheetSecura™ Interior FlooringTile and Slate Underlay

Exterior CladdingWeatherboards Linea™ Weatherboard

Linea™ Oblique™ WeatherboardFrontier Weatherboard Smooth Weatherboard Rusticated Weatherboard

Monolithic James Hardie™ Stucco SolutionMonotek™ Sheet

Panel Axon™ PanelEasyLap™ PanelExoTec™ Facade PanelHardieFlex™ SheetStria™ CladdingTitan™ Facade Panel

Pre-Cladding HomeRAB™ Pre-CladdingRAB™ Board

GablesAxon™ PanelEasyLap™ PanelHardieFlex™ Sheet

Hallways and Living AreasHardieGroove™ Lining Invibe™ PanelInraw™ Panel Villaboard™ Lining

CeilingsHardieGlaze™ Lining HardieGroove™ Lining Villaboard™ Lining

BargeAxent™ Fascia

Trim Around: Windows and DoorsAxent™ Trim

InsulationJames Hardie™ Mineral Insulation

Wet areas: Bathrooms / Laundries / KitchensHardieGlaze™ Smooth Lining HardieGlaze™ Tile Lining HardieGlaze™ Premium Lining HardieGroove™ Lining Invibe™ PanelVillaboard™ Lining

Eaves and SoffitsEclipsa™ Eaves Lining HardieGroove™ Lining HardieFlex™ Eaves Lining HardieSoffit™ Lining Villaboard™ Lining

DecksHardiePanel™ Compressed SheetSecura™ Exterior Flooring


4 Pre-Cladding

HomeRAB Pre-Cladding is a 4.5mm thick fibre cement board. It’s a robust rigid air barrier which offers resistance to gusting winds, reducing draught, keeping homes warm and creating comfort inside. The unique green panel has a built in air and water resistant barrier to keep moisture out, while still allowing the moisture vapour to pass through allowing framing cavity to dry.

ApplicationHomeRAB Pre-Cladding 4.5mm is a cost effective rigid wall underlay designed for wind zones up to and including Very High for residential buildings.

Key Features and Benefits• Resistant to fire and damage from moisture and

rotting• Vapour permeability of HomeRAB Pre-Cladding

allows the moisture within the frame cavity to dry• Early close-in avoids delays caused by weather

conditions; removing the need to reschedule sub-trades and reducing unplanned equipment hire costs

• A complete solution for external wall bracing and structural connectivity of studs to top plates; minimising the need for internal bracing elements and for additional top plate fixings

• Can be cut to size easily with the HardieKnife™, minimising dust on site

• Will not warp or shrink when exposed to the weather, can be exposed for up to 180 days

• BRANZ Appraised• Achieves 50 year durability• 15 year product warranty

´�Refer to the James Hardie Rigid Air Barriers installation manual for further construction information.

SHEET SIZES CODE UNITS PER PACK

4.5mm 2450 x 1200 404766 40

4.5mm 2750 x 1200 404768 40

4.5mm 3000 x 1200 404916 40

ACCESSORIES

PVC HomeRAB 4.5 Horizontal Flashing3000mmCODE: 305798 (pk - 10)

PRE-CLADDING

HomeRAB PR

E-CLA

DD

ING


RAB Board is an all in one bracing, airtight and fire resistant fibre cement rigid air barrier. The inherent strength of RAB Board makes it an ideal product for use in shear wall design in residential or commercial specific design projects. The unique green panel has a built in air and water resistant barrier to keep moisture out, while still allowing the moisture vapour to pass through allowing framing cavity to dry.

ApplicationRAB Board 6mm is suitable for use up to and including Extra High (EH) wind zones or SED projects for both residential and commercial buildings.RAB Board 9mm is robust and impact resistant designed for heavy commercial buildings outside the scope of NZS 3604 for Specific Engineered Designed projects.

Key Features and Benefits• Resistant to fire and damage from moisture and rotting• Up to 60 minutes fire resistance rating (FRR) can be

achieved when installed as per the James Hardie Fire and Acoustic Design Manual

• Suitable for use in Extra High wind zones or for specific design residential or commercial projects

• Suitable to withstand design wind pressures up to 4.5kPa (ULS)

• Increases the overall rigidity of the structure, minimising structural movement

• Enhanced water repellent sealer on the surface helps keep the framing cavity dry

• Can be cut to size easily with the HardieKnife, minimising dust on site

• Will not warp or shrink when exposed to the weather, can be exposed for up to 180 days

• BRANZ Appraised• Achieves 50 year durability• 15 year product warranty

´�Refer to the James Hardie Rigid Air Barriers installation manual for further construction information.


6mm 3000 x 1200 402981 20/40

6mm 2450 x 1200 402980 20/40

9mm 3000 x 1200 404971 30

9mm 2750 x 1200 404972 30

ACCESSORIES

HardieFlex Stainless Steel 316 Nail 60 x 3.15mm (5kg, approx 1200 per box)CODE: 302782

HardieFlex Hot Dip Galvanised Nail 60 x 3.15mm (5kg, approx 1200 per box)CODE: 302784

RAB 6mm Horizontal Flashing 3000mmCODE: 305152 (pk - 10)

RAB 9mm Horizontal Flashing 3000mmCODE: 305945 (pk - 10)

BOARD

RAB


5 Weatherboard

James Hardie Weatherboards are available in 3 different styles and offer a cost effective solution to suit classic and modern designs. Smooth Weatherboard gives you the classic traditional horizontal lines, Rusticated Weatherboard gives the look of a textured weatherboard and Frontier Weatherboard is a natural looking finish that mimics wood.

ApplicationUsed as a complete cladding or in composite construction, upper storey and ground-level extensions and feature walls.

Key Features and Benefits• Resistant to fire and damage from moisture and rotting• Engineered to perform in harsh conditions, including

coastal environments• Up to 60 minute fire resistance rating (FRR) can be


• Comes pre-primed in a manila white colour• Low maintenance• Classified as non-combustible material• 15 year product warranty

´ Refer to the James Hardie Weatherboard Technical Specification for further construction information.


7.5mm 4200 x 305 400412 60/120

7.5mm 4200 x 240 400411 60/120

7.5mm 4200 x 180 401663 60/120

Smooth Weatherboard

SHEET SIZE CODE UNITS PER PACK

7.5mm 4200 x 205 400379 60/120

Rusticated Weatherboard


7.5mm 4200 x 310 400152 60/120

7.5mm 4200 x 245 400151 60/120

Frontier Weatherboard

WEATHERBOARDS

James Hardie WEATH

ERB

OA

RD


James Hardie Weatherboards

ACCESSORIES

Aluminium Concealed Back Soaker 310mmCODE: 303933 (pk - 50)245mmCODE: 303934 (pk - 50)205mmCODE: 303935 (pk - 50)180mmCODE: 303936 (pk - 50)

Aluminium Ext Corner Soakers 90º 310mmCODE: 303930 (pk - 50)245mmCODE: 303931 (pk - 50)180mmCODE: 303932 (pk - 50)

Aluminium Ext Corner (Box) Mould 3000mmCODE: 300380 (pk - 1)2700mmCODE: 300378 (pk - 1)

PVC Ext Flashing (Box) 3000mmCODE: 300852 (pk - 10)

PVC Internal ‘W’ Corner Mould 90º 2700mmCODE: 300870 (pk - 10)

JH Weatherboard Aluminium 90º Int Corner ‘W’ Mould 2700mmCODE: 300386 (pk - 1)

Aluminium Ext Corner 135º 2700mmCODE: 300375 (pk - 1)

Aluminium Int Corner 135º

2700mmCODE: 300383 (pk - 1)

PVC Weatherboard Cap Mould 3000mmCODE: 300995 (pk - 10)

PVC James Hardie Corner Underflashing 3000mm CODE: 303745 (pk - 10)

PVC Vent Strip 75mm x 18mm Wide x 3000mmCODE: 302490 (pk - 25)


HardieFlex Galvanised Nail 75 x 3.15mm (5kg, approx 950 per box)CODE: 304251

James Hardie Weatherboards



16mm 4200 x 180 401847 60

16mm 4200 x 150 402533 60

16mm 4200 x 135 401844 60

Linea Weatherboard is a bevel-back weatherboard that offers design flexibility in traditional and modern architecture. The clean horizontal lines of Linea Weatherboard work beautifully with the expansive surfaces and spaces of contemporary architecture or provide you with the traditional deep shadow lines of classically styled homes.

Application Linea Weatherboard is an obvious choice for complete new builds, striking feature walls, cladding for additions and renovations or restoring older buildings. Use it as a complete cladding solution or combine it with other James Hardie cladding solutions for a unique modern look.

Key Features and Benefits• Resistant to fire and damage from moisture and

rotting• Can be painted dark colours• Engineered to perform in harsh conditions, including



• Comes pre-primed in a manila white colour• Available in 135, 150 and 180mm widths• Classified as non-combustible material• Low maintenance• CodeMark certified• BRANZ appraised• 25 year product warranty

´�Refer to the Linea Weatherboard Technical Specification for further construction information.

Linea Weatherboard

WEATHERBOARD

Linea WEATH

ERB

OA

RD


Linea Weatherboard


Linea 135mm Aluminium Ext Corner Soaker 90º

CODE: 301185 (pk - 20)

Linea 135mm S/S Ext Corner Soaker 90º

CODE: 301196 (pk - 20)


CODE: 302820 (pk - 20)


CODE: 302821 (pk - 20)


CODE: 301186 (pk - 20)

Linea 180mm Copper Ext Corner Soaker 90º

CODE: 301188 (pk - 20)


CODE: 301197 (pk - 20)


CODE: 301178 (pk - 20)

Linea Alum Ext Slimline Box Corner 2700mm etch primeCODE: 301195 (pk - 1)

Linea Alum Ext Slimline Box Corner 4000mm etch primeCODE: 305809 (pk - 1)

Linea PVC Box Corner ‘Z’ Flashing 2700mmCODE: 301203 (pk - 10)

Linea Aluminium Int ‘W’ Corner Mould 2700mm 90º

CODE: 301184 (pk - 1)


CODE: 305807 (pk - 1)


CODE: 301183 (pk -1)





Gecko GaugeCODE: 305941

ACCESSORIES

Linea Weatherboard WEATH

ERB

OA

RD


Linea Oblique Weatherboard

WEATHERBOARD

Linea Oblique

Linea Oblique Weatherboard is a modern, rusticated weatherboard profile that can be installed both horizontally and vertically. It’s available in 200 and 300mm widths allowing you to create both modern and traditional designs, or try combining the two widths to create an architectural look that’s truly unique.

Application An external wall cladding for residential and light commercial builds. Linea Oblique Weatherboard is an obvious choice for complete new builds, colourful feature walls and cladding for additions and renovations.

Key Features and Benefits• Resistant to damage from moisture and rotting• Can be painted dark colours• Engineered to perform in harsh conditions, including



• A vertical jointing option is available to create a feature along long walls

• Can be installed both vertically and horizontally• Comes pre-primed in a manila white colour• Classified as non-combustible material• Low maintenance• CodeMark certified• BRANZ appraised• 25 year product warranty

´�Refer to the Linea Oblique Weatherboard Technical Specification for further construction information.


16mm 2700 x 200 404855 60

16mm 2700 x 300 404856 45

16mm 4200 x 200 404849 60

16mm 4200 x 300 404848 45



WEATH

ERB

OA

RD

Oblique Alum External Box Corner2700mm CODE: 305825 (pk - 1)4000mm CODE: 305873 (pk - 1)

Oblique Alum Trimline Joint Flashing 3000mm CODE: 305826 (pk - 1)

Trimline Horizontal Jointer CODE: 305871 (pk - 1)

Trimline External Corner Jointer CODE: 305870 (pk - 1)

Trimline Internal Corner Jointer CODE: 305872 (pk - 1)

Vertical Joint Flashing Alum3000mm CODE: 305507 (pk - 1)

JH Weatherboard Internal W Corner 900 Mould 2700mm CODE: 300386 (pk - 1)

Aluminium Window Jamb Flashing3000mm CODE: 305430 (pk - 1)

Stria Aluminium Cavity Closure3000mm CODE: 305431 (pk - 1)

PVC Vent Strip 75mm x18mm3000mm CODE: 302490 (pk - 25)

James Hardie Horizontal Cavity Batten 20mm2700mm CODE: 305862 (pk - 1)

Linea Oblique Plug CODE: 305930 (pk - 200)

ACCESSORIES



Axent Trim

Axent Fascia

Axent Trim is a 16mm thick fibre cement trim used for decorative purposes. It’s an easy way to create the classic feature corners often seen on traditional New Zealand homes. Perfect for use with Linea Weatherboard and Linea Oblique Weatherboard.

ApplicationAxent Trim is suitable for residential or light commercial buildings anywhere in New Zealand. Use it to create box corners, exterior trim for around windows and doors or to incorporate unique architectural features.

Key Features and Benefits• Engineered to stand up to harsh conditions, including

coastal conditions• Cost effective and long lasting• Resistant to damage from moisture and rotting• Can be painted any colour, even the darker shades• Classified as non-combustible material• Low maintenance• Comes pre-primed in a manila white colour• 15 year product warranty

With performance benefits that match your cladding, Axent Fascia is light to handle and is available in two widths. This fascia board seamlessly compliments James Hardie’s cladding range for traditional or modern homes.

ApplicationAxent Fascia’s are 16mm thick pre-primed boards that are used as a base to attach the gutters to, or as a cover to hide the fixing space between the roof, eaves and wall. Axent Fascia is suitable for residential and light commercial buildings.


coastal conditions• Cost effective and long lasting• Resistant to damage from moisture and rotting• Can be painted any colour, even the darker shades• Classified as non-combustible material• Low maintenance• Comes pre-primed in a manila white colour• 15 year product warranty


16mm 2600 x 100 401930 10

16mm 2600 x 84 401943 10


16mm 4200 x 230 402230 60

16mm 4200 x 180 401843 60

FASCIA

AxentTRIM

Axent WEATH

ERB

OA

RD


PANEL

Axon6 Panel

Creating a strong visual impact for your building is easier than ever with Axon Panel. Easy to install, robust and versatile, Axon Panel is a clever alternative to traditional vertical shiplap weatherboards. The vertical lines complement classic and modern building designs to create stand out facades, and bring texture and interest to outdoor rooms.

ApplicationAxon Panel cladding can be used in residential or commercial applications wherever a modern design is required, including external walls in composite construction, upper-storey and ground-level extensions, and internal feature walls.


coastal conditions• Can be painted any colour, even the darker shades• Cost effective and long lasting• Resistant to damage from moisture and rotting• Up to 60 minute fire resistance rating (FRR) can be


• Easy to install• Classified as non-combustible material• Low maintenance• 15 year product warranty

´ Refer to the Axon Panel or Axon Panel Timber Cavity Technical Specification for further construction information.


9mm 2450 x 1200 403780 30

9mm 2750 x 1200 403781 30

9mm 3000 x 1200 403782 30

Axon Panel 133mm smooth


9mm 2450 x 1200 404510 30

9mm 2750 x 1200 404511 30

9mm 3000 x 1200 404512 30

Axon Panel 133mm grained


9mm 2450 x 1200 404414 30

9mm 2750 x 1200 404415 30

9mm 3000 x 1200 404416 30

Axon Panel 400mm smooth


PAN

EL

JH 9mm Panel Aluminium Horizontal ‘h’ Mould 3000mm etch primeCODE: 304508 (pk - 1)

JH 9mm Panel Aluminium External Box Corner 2450mm etch primeCODE: 304509 (pk - 1)2750mm etch primeCODE: 304510 (pk - 1)3000mm etch primeCODE: 305150 (pk - 1)4000mm etch primeCODE: 305808 (pk - 1)

Aluminium Horizontal ‘h’ Mould Jointer 100mm etch primeCODE: 304512 (pk - 20)



Inseal 3259 Black 48mm (50m Roll)CODE: 30076780mm (50m Roll)CODE: 300769



CLD Structural Cavity Batten 19 x 70mm, 2450mm longCODE: 403870 (pk - 96)

JH 9mm Alum 'H' mould exterior cornerCODE: 305940 (pk - 20)

ACCESSORIES

Axon Panel


Axon Panel


PAN

ELEasyLap Panel is a strong fibre cement substrate with a shiplap vertical joint, it’s a quick and easy way to achieve a clean, textured look. The panel can be finished with a site applied roll on textured acrylic paint for that rendered look, or you can paint it smooth.

ApplicationIdeal to be used as external wall cladding in residential and medium density homes, including alterations and additions, where a uniform broad wall cladding is required.


coastal conditions• Easy and cost effective way to create texture• Can be painted any colour, even the darker shades• Cost effective and long lasting• Resistant to damage from moisture and rotting• Up to 60 minute fire resistance rating (FRR) can be


• Classified as non-combustible material• Low maintenance• 15 year product warranty

´ Refer to the EasyLap Panel Technical Specification for further construction information.


9mm 2450 x 1200 404764 30

9mm 2750 x 1200 404765 30

9mm 3000 x 1200 404763 30

JH 9mm Panel Aluminium Horizontal ‘h’ Mould 3000mm etch primeCODE: 304508 (pk - 1)

JH 9mm Panel Alum External Box Corner 2450mm etch primeCODE: 304509 (pk - 1)2750mm etch primeCODE: 304510 (pk - 1)3000mm etch primeCODE: 305150 (pk - 1)4000mm etch primeCODE: 305808 (pk - 1)

Aluminium Horizontal ‘h’ Mould Jointer 100mm etch primeCODE: 304512 (pk - 20)



JH 9mm Alum 'H' mould exterior cornerCODE: 305940 (pk - 20)

ACCESSORIES

PANEL

EasyLap


EasyLap Panel


HardieFlex Sheet's cover a wide range of design solutions for residential and commercial applications. The smooth cladding sheets makes straight walls look sleek, clean and modern. Strong enough for commercial use, while also providing ultra-protection for residential investments. For a truly modern look add timber battens for design impact.

ApplicationHardieFlex Sheet's are suitable for use in residential extensions, second story additions, gable ends and commercial applications. It can also be used to line porches, verandahs carports and for soffits and eaves.


coastal conditions• Cost effective and long lasting• Resistant to damage from moisture and rotting• Up to 60 minute fire resistance rating (FRR) can be


• Suitable for bracing• Can be cut to size easily with the HardieKnife,

minimising dust on site• Classified as non-combustible material• Low maintenance• 15 year product warranty

´ Refer to the HardieFlex Sheet Technical Specification for further construction information.


6mm 3000 x 1200 400168 25

6mm 2700 x 1200 400170 50

6mm 2400 x 1200 400172 50

6mm 1800 x 1200 400174 25

6mm 2400 x 900 400176 25

7.5mm 3000 x 1200 400178 20

7.5mm 2700 x 1200 400179 20

7.5mm 2400 x 1200 400180 20

SHEET

HardieFlex

PAN

EL

HardieFlex Sheet


HardieFlex Sheet

6MM

PVC Hardiejointer 6mm 3000mmCODE: 300734 (pk - 25)2400mmCODE: 300730 (pk - 50)

PVC Cap Mould 6mm 3000mmCODE: 300540 (pk - 25)2400mmCODE: 300539 (pk - 25)

PVC Horizontal Flashing 6mm 3000mmCODE: 302254 (pk - 10)

7.5MM

PVC Hardiejointer 7.5mm 3000mmCODE: 300735 (pk - 25)2400mmCODE: 300731 (pk - 25)

PVC Cap Mould 7.5mm 3000mmCODE: 300541 (pk - 25)

PVC Horizontal Flashing 7.5mm 3000mmCODE: 302256 (pk - 10)

6MM AND 7.5MM

PVC Universal Ext Corner 2pc 3000mmCODE: 305755 (pk - 5)

PVC Universal Int Corner 2pc 3000mmCODE: 305756 (pk - 5)

PVC H Mould Universal Jointer 90º

CODE: 301920 (pk - 10)

PVC H Mould Universal Joint 180º

CODE: 301921 (pk - 20)




HardieFlex Stainless Steel 316 Nail60 x 3.15mm (5kg, approx 1200 per box)CODE: 302782


ACCESSORIES


PAN

ELThe wider format of Stria Cladding delivers a look that’s distinctive and modern. Stria Cladding features a shiplap joint and has deep grooved lines which can be laid horizontally or vertically.

ApplicationStria Cladding is suitable for use on external walls in composite or full wrap construction, upper-storey and ground-level extensions and internal feature walls. Stria Cladding is lightweight and durable, making it ideal for overhangs, protective cantilevers and other striking architectural features.


coastal conditions• The interlocking edges allow for quick and easy

installation• Wide panel format allows faster installation• Can be painted any colour, even the darker shades• Cost effective and long lasting• Resistant to damage from moisture and rotting• Up to 60 minute fire resistance rating (FRR) can be


• Classified as non-combustible material• Low maintenance • 15 year product warranty

´ Refer to the Stria Cladding Technical Specification for further construction information.

SHEET SIZE CODE UNITS PER PACK

14mm 4200 x 405 404263 40

Stria Cladding

CLADDING

Stria


Stria Cladding



Vertical Joint Flashing Aluminium 3000mm etch primeCODE: 305507 (pk - 1)

Stria Internal Corner Aluminium 3000mm etch primeCODE: 304871 (pk - 1)

Stria External Box Corner Aluminium3000mm long etch prime with wingsCODE: 304872 (pk - 1)

Stria External Box Corner Aluminium 2700mm long etch primeCODE: 305824 (PK - 1)4000mm long etch prime CODE: 305823 (pk - 1)

Stria Aluminium Cavity Closure3000mm CODE: 305431 (pk - 1)

Stria Jamb Flashing Aluminium3000mm CODE: 305430 (pk - 1)

Stria Aluminium Trimline Joint Flashing3000mm etch prime CODE: 305827 (pk - 1)

Trimline Horizontal JointerCODE: 305871 (pk - 1)

Trimline External Corner JointerCODE: 305870 (pk - 1)

Trimline Internal Corner JointerCODE: 305872 (pk - 1)



JH Horizontal batten CODE: 305862

ACCESSORIES

Stria Cladding

PAN

EL


FACADE PANEL

Titan

Titan Facade Panel is an exterior cladding system with a modern, contemporary geometric, expressed-joint finish. Titan Facade Panel offers a bold industrial look where the modern panelised look is desired. It has a smooth surface that gives a continuous uniform finish providing a fashionable clean look to your design.

ApplicationIt can be used in commercial or residential developments such as free standing homes, town houses and terraces, including external walls in composite construction, upper-storey and ground-level extensions and internal feature walls.


coastal conditions• Can be painted any colour, even the darker shades• Cost effective and long lasting• Resistant to damage from moisture and rotting• Up to 60 minute fire resistance rating (FRR) can be



´ Refer to the Titan Facade Panel CLD Structural Cavity Batten or Titan Facade Panel Rainscreen Technical Specification for further construction information.


9mm 3000 x 1190 403021 20

9mm 2700 x 1190 403022 20

9mm 2400 x 1190 403023 20

Titan Facade Panel



Aluminium Horizontal T Socket 2400mmCODE: 304103 (pk - 1)


CLD Structural Cavity Batten 19 x 70mm, 2450mm long CODE: 403870 (pk - 96)

CLD Batten Flashing Aluminium 75mmCODE: 304651 (pk - 20)

CLD Batten Corner Flashing AluminiumCODE: 304652 (pk - 10)

ExoTec Facade Panel washerCODE: 302761(pk - 1000)

PAN

EL

Titan facade panel

Butynol Inseal Strip 50mm (12m Roll)CODE: 30053480mm (12m Roll)CODE: 300535

Tungsten Carbide Drill Bit 9mmCODE: 300567


PVC H Mould Universal Jointer 90ºCODE: 301920 (pk - 10)

PVC H Mould Universal Joint 180ºCODE: 301921 (pk - 20)




ACCESSORIES


Titan Facade Panel


PAN

ELExoTec Facade Panels provide a durable, expressed joint panel appearance for building façades and fascias. Not only is it a cost effective and durable exterior building product, it will give an effortless jointed panel look with an ultra modern feel.

ApplicationExoTec Facade Panels are suitable for use on high-rise buildings exposed to extreme wind pressure and other weather elements. Made from high-density fibre cement, it can be used for commercial and residential properties anywhere in New Zealand.


coastal conditions• Offers expressed joint features• ExoTec Facade Panels accept a variety of surface

finishes• Cost effective and long lasting• Resistant to damage from moisture and rotting• Up to 60 minute fire resistance rating (FRR) can be



´ Refer to the ExoTec Facade Panel Rainscreen Technical Specification for further construction information.


9mm 3000 x 1190 402284 8

9mm 2400 x 1190 402282 8

Butynol Inseal Strip 50mm (12m Roll)CODE: 30053480mm (12m Roll)CODE: 300535





ACCESSORIES

FACADE PANEL

ExoTecTimber batten application


ExoTec Facade Panel


ExoTec Top Hat Rainscreen

ExoTec Top Hat4800mm CODE: 304580 (pk - 1)

ExoTec Intermediate Top Hat4800mm CODE: 304581 (pk - 1)

ExoTec Top Hat Snap Strip4800mm CODE: 304582 (pk - 1)

ExoTec Top Hat Ext/Int Corner 3000mm CODE: 304661 (pk - 1)

ExoTec Top Hat J Mould3000mm CODE: 304662 (pk - 1)

ExoTec Top Hat Base Mould3000mm CODE: 304663 (pk - 1)

Aluminium Horizontal T Socket 2400mm CODE: 304103 (pk - 1)


ExoTec Facade Panel WashersCODE: 302761 (pk - 1000)


ACCESSORIESThe ExoTec Facade Panel Top Hat Rainscreen offers versatility to architects and builders. It can be used on a variety of buildings which may be exposed to very high wind pressures and can be installed using the same fixing method regardless of the framing substrate material.

Key Features and Benefits• The ExoTec Facade Panel fixed to Top Hats acts

as a Rainscreen and creates a 35mm deep cavity behind the panels which manages the moisture more effectively.

• The Top Hats can be fixed to the horizontal structural framing e.g. girts, top and bottom plates and nogs without aligning them over the studs. This makes Top Hats and ExoTec Facade Panel installation quicker saving you time and money.

• Zincalume coating on Top Hat sections enhance their durability in harsh New Zealand climatic and coastal conditions.

• ExoTec Facade Panel and Top Hat Rainscreen system is a cost effective cladding solution for building facades exposed to high wind pressures.

´ Refer to the ExoTec Facade Panel Top Hat Technical Specification for further construction information.

PAN

EL


7 Monolithic

To achieve the traditional plastered monolithic finish, HomeRAB Pre-Cladding is a suitable substrate for solid plasters. It has a green sealer coat over the face.

ApplicationFor use as a rigid backing board for stucco plaster.


coastal conditions• Cost effective and long lasting• Resistant to damage from moisture and rotting• Classified as non-combustible material• Low maintenance• 15 year product warranty

´ Refer to the James Hardie Stucco Solution Technical Specification for further construction information.


4.5mm 2750 x 1200 404768 40

4.5mm 2450 x 1200 404766 40

ACCESSORIES

PVC Stucco Base Mould 2700mmCODE: 300658 (pk - 20)

PVC Stucco Control Joint Mould 2700mmCODE: 300659 (pk - 10)

PVC Stucco Spacer Angle 50m RollCODE: 300661 (pk - 10)


PVC H Mould Universal Jointer 90ºCODE: 301920 (pk - 10)

PVC H Mould Universal Joint 180ºCODE: 301921 (pk - 20)



HardieFlex Hot Dip Galvanised Nail '60 x 3.15mm (5kg, approx 1200 per box)CODE: 302784

James Hardie Stucco Solution


Monotek Sheet is a suitable substrate to create the classic monolithic look of plaster. Developed specifically for New Zealand’s climatic conditions, Monotek Sheet provides a surface perfect for a textured finish to be applied. It’s a versatile, cost effective cladding that creates reliable and seamless walls.

ApplicationMonotek Sheet is used as an external cladding in residential homes, including alterations and additions, where a lightweight system with a monolithic rendered look is required. Monotek Sheet achieves the monolithic look using proprietary jointing and texture coating systems.


coastal conditions• Cost effective and long lasting• Resistant to damage from moisture and rotting• Up to 60 minute fire resistance rating (FRR) can be


• Classified as non-combustible material• Low maintenance• BRANZ appraised• 15 year product warranty

´ Refer to the Monotek Sheet Technical Specification for further construction information.


7.5mm 3000 x 1200 Rec 2 Sides 400315 20

7.5mm 2700 x 1200 Rec 2 Sides 400316 20/40

7.5mm 2450 x 1200 Rec 2 Sides 400317 20/40

9mm 3000 x 1200 Rec 2 Sides 403500 20

9mm 2700 x 1200 Rec 2 Sides 403502 20

9mm 2450 x 1200 Rec 2 Sides 403503 20

Monotek Sheet

SHEET

Monotek MO

NO

LITHIC


Monotek Sheet


PVC Horizontal Flashing 7.5mm 3000mmCODE: 302256 (pk - 10)PVC Horizontal Flashing 9mm 3000mmCODE: 302257 (pk - 10)

PVC H Mould Universal Jointer 90º

CODE: 301920 (pk - 10)

PVC H Mould Universal Joint 180º

CODE: 301921 (pk - 20)

ACCESSORIES



HardieFlex Stainless Steel 316 Nail60 x 3.15mm (5kg, approx 1200 per box)CODE: 302782

HardieFlex Hot Dip Galvanised Nail60 x 3.15mm (5kg, approx 1200 per box)CODE: 302784


INTER

NA

L LININ

GS

HardieGroove Lining lets you add a unique tongue and groove look to your walls and ceilings. Made of tough fibre cement board, it adds durability as well as timeless charm. It’s a flat sheet that has vertical V-shaped grooves carved into its face. Sanded smooth, its site painted any colour you choose to create the traditional look of tongue and groove panels.

ApplicationSuper practical and also a charming addition to your décor, it can be used in both dry and semi-wet areas. HardieGroove Lining is perfect for internal walls, ceilings, kitchens, bathrooms and externally on soffits and verandah ceilings.

Key Features and Benefits• Can be used as an internal wall or ceiling lining• Suitable for semi-wet areas such as bathrooms,

kitchens and laundries• Can be used externally on eaves and soffits• Resistant to damage from moisture and rotting• Outstanding impact resistance, making it ideal where

walls are prone to damage• HardieGroove Lining’s half grooved edge of each sheet

provides concealed joints• Can be cut to size easily with the HardieKnife,

minimising dust on site• Easy to install, paint and stain• Classified as non-combustible material• 15 year product warranty

´ Refer to the HardieGroove Lining Installation Manual for further construction information.


7.5mm 3000 x 1200 404917 20

7.5mm 2700 x 1200 400245 20

7.5mm 2400 x 1200 400246 20

ACCESSORIES

Villadrive Screw 30mm x 6g (100/Jar)CODE: 300992

Villadrive Screw 30mm x 6g (5kg, approx 3325 per box)CODE: 300993

Villadrive Screw 30mm x 6g Phillip (1000 Collated)CODE: 300994

HardieDrive Screw 30mm x 7g 100/Jar Stainless Steel 316CODE: 300928

James Hardie Base Coat (4kg Pail)CODE: 304490

James Hardie Base Coat (15kg Bag)CODE: 304491

FibreZip® Self Drill Rib Head Screw 30mm (Box of 1000)CODE: 303840

8 Internal linings

LINING

HardieGroove


HardieGroove Lining


INTER

NA

L LININ

GS

Villaboard Lining is a high performance fibre cement board that creates a seamless flat surface which can be finished with paint, wallpaper, tiles or vinyl to provide a variety of looks. It’s ideal for use under tiles and offers high impact resistance on its own as well.

ApplicationVillaboard Lining is an ideal internal substrate for bathrooms, laundries and kitchens, or high impact areas such as hallways, garages and rumpus rooms. The seamless joints and negative details also bring a smooth plastered look to your verandah ceilings, eaves and soffits.

Key Features and Benefits• Durable internal lining suitable for wet areas such as

bathrooms and laundries• Up to 60 minute fire resistance rating (FRR) can be


• Reliable impact resistant lining. Ideal for wall lining applications where walls are prone to damage

• It is appropriate for both commercial and residential internal uses

• Resistant to damage from moisture and rotting• Can be cut to size easily with the HardieKnife,

minimising dust on site• Non-combustible material• 15 year product warranty

´ 9mm Villaboard Lining can be used as a heat shield. Refer to the technical supplement.

´ Refer to the Villaboard Lining Installation Manual for further construction information.


6mm 3000 x 1200 Rec 2 sides 400427 20

6mm 2700 x 1200 Rec 2 sides 400428 20

6mm 2400 x 1200 Rec 2 sides 400429 20

6mm 2400 x 1200 Rec 4 sides 400432 20

6mm 2400 x 1200 Sq edge 4 sides 400444 20

6mm 3000 x 1200 Sq edge 4 sides 400442 20

Villaboard Lining 6mm


9mm 3000 x 1200 Rec 2sides 400434 20

9mm 2700 x 1200 Rec 2sides 400435 20

9mm 2400 x 1200 Rec 2sides 400436 20

9mm 2400 x 1200 Rec 4sides 400439 20

9mm 2400 x 1200 Sq edge 4sides 400445 20

9mm 3000 x 1200 Sq edge 4sides 400059 20

Villaboard Lining 9mm

LINING

Villaboard


Villaboard Lining


PVC Cap Mould 6mm 3000mmCODE: 300540 (pk - 25)2400mmCODE: 300539 (pk - 25)

Hardiejointer 9mm 3000mm(2-piece)CODE: 300736 (pk - 10)

PVC Int/Ext Corner Mould 3000mmCODE: 300669 (pk - 20)

Villaboard PVC Control Joint White2700mmCODE: 300978 (pk - 10)

James Hardie Base Coat (4kg Pail)CODE: 304490

James Hardie Base Coat (15kg Bag)CODE: 304491

James Hardie Top Coat (3kg Pail)CODE: 304492

James Hardie Top Coat (15kg Pail)CODE: 304493

Villadrive Screw 30mm x 6g(100/Jar)CODE: 300992

Villadrive Screw 30mm x 6g (5kg, approx 3325 per box)CODE: 300993

Villadrive Screw 30mm x 6g Phillip (1000 Collated)CODE: 300994

FibreZip® Self Drill Rib Head Screw 30mm (Box 1000)CODE: 303840

Inseal 3259 48mm Black (50m Roll)CODE: 300767

HardieDrive Screw 30mm x 7g 100/Jar Stainless Steel 316CODE: 300928

ACCESSORIES

INTER

NA

L LININ

GS


9 Prefinished linings

HardieGlaze Lining's are pre-finished wall panels manufactured on a durable fibre cement board. They are a hard wearing internal wall lining that will create an easy clean ceramic look. HardieGlaze Lining are produced using UV coating technology. The paint contains no Volatile Organic Compounds and is fully cured using UV light. They provide good resistance to abrasion, wear and light surface scratching.

Available in a smooth finish or choose from 3 modern tile designs for an easy clean, grout free, low maintenance alternative to tiles.

LINING

HardieGlaze

ApplicationThey are suitable for use in wet, semi-wet or dry areas such as bathrooms, ensuites, toilets, kitchens, shower rooms, laundries, and changing rooms. They can be used in both residential and commercial spaces.

Key Features and Benefits• Durable internal lining suitable for wet areas such as

bathrooms and laundries• Appropriate for both commercial and residential

internal uses• Resistant to fire and damage from moisture and rotting• Achieves the best possible fire hazard properties

classification of ‘Group 1-S’• Hard wearing coating is durable and light scratch

resistant• Easy to install straight onto framing or over existing

linings• Antimicrobial protection• Jointing options available to create different looks• Low maintenance and easy to clean• 15 year product warranty

HardieGlaze Smooth Lining


The smooth panel has a high-gloss white finish in a 4.5mm thickness. Suitable for applications in wet and dry areas across both residential and commercial spaces.


4.5mm 2400 x 1200 400221 2

4.5mm 2400 x 900 400225 2

The same high-gloss white finish as HardieGlaze Smooth Lining but in a thicker 6mm panel. Suitable when you need extra impact resistance, making it an ideal solution in commercial and industrial wet and dry areas.


6mm 2700 x 1200 400210 2

6mm 2400 x 1200 400211 2


HardieGlaze Premium Lining

PR

EFINISH

ED LIN

ING

S

PVC

HardieGlaze 4.5mm 2400mm Jointer White GlossCODE: 300690 (PK - 12)

HardieGlaze 4.5mm 2400mm Internal Corner White GlossCODE: 300686 (PK - 12)

HardieGlaze 4.5mm 2400mm External Corner White GlossCODE: 300682 (PK - 12)

HardieGlaze 4.5mm 2400mm Cap Mould White GlossCODE: 300678 (PK - 12)

HardieGlaze 4.5mm 2500mm Bath Mould White GlossCODE: 300674 (PK - 12)

NATURALLY ANODISED

HardieGlaze 4.5mm 2700mm Cap AluminiumCODE: 304501 (PK - 1)

HardieGlaze 4.5mm 2700mm External Corner AluminiumCODE: 304503 (PK - 1)

HardieGlaze 4.5mm 2700mm Internal Corner AluminiumCODE: 304505 (PK - 1)

HardieGlaze 4.5mm 2700mm Jointer AluminiumCODE: 304507 (PK - 1)

ACCESSORIES



The Listello Tile Lining is a white high-gloss finish with a 150x300mm oblong shaped tile pattern embossed into the coating.

HardieGlaze Tile Lining - Listello

HardieGlaze Tile Lining is a white high-gloss finish with a 150x150mm tile pattern embossed into the coating.


6mm 2700 x 1200 White 400237 2

6mm 2400 x 1200 White 400240 2

6mm 2400 x 900 White 400243 2


6mm 2400 x 1200 White 404391 2

ListelloTile Lining

HardieGlaze Tile Lining


HardieGlaze Tile Lining - Grande

Grande

The Grande Tile Lining is a white high-gloss finish with a large format 600x300mm tile pattern embossed into the coating.


6mm 2400 x 1200 404390 2

Fastfix Fasteners (Xmas Trees) PVC White (100/Bag)CODE: 300632

Soffit Scotia Mould PVC 2400mm White. 2pc Base and CapCODE: 300916 (PK - 10)

Touch-Up Paint Kits 15ml WhiteCODE: FREE

James Hardie 2 Sided Adhesive Tape12mm x 33mCODE: 305433

ACCESSORIES

HardieGlaze 4.5mm & 6mm

PR

EFINISH

ED LIN

ING

S


HardieGlaze 6mm 2700mm Premium Jointer WhiteCODE: 300713 (PK - 1)

HardieGlaze 6mm 2700mm Premium Cap Mould WhiteCODE: 300695 (PK - 1)

HardieGlaze 6mm 2700mm Premium Internal Corner WhiteCODE: 300707 (PK - 1)

HardieGlaze 6mm 2500mm Premium Bath Mould WhiteCODE: 300691 (PK - 1)

HardieGlaze 6mm 2700mm Premium External Corner WhiteCODE: 300701 (PK - 1)

HardieGlaze Tile 2700mm Internal Corner 2pc WhiteCODE: 300946 (PK - 5)

ACCESSORIES

HardieGlaze 6mm PVC

HardieGlaze 6mm 2700mm Cap AluminiumCODE: 304500 (PK - 1)

HardieGlaze 6mm 2700mm Sheet Jointer AluminiumCODE: 304506 (PK - 1)

HardieGlaze 6mm 2700mm External Corner AluminiumCODE: 304502 (PK - 1)

HardieGlaze 6mm 2700mm Negative Jointer Dry AluminiumCODE: 305752 (PK - 1)

HardieGlaze 6mm 2700mm Internal Corner AluminiumCODE: 304504 (PK - 1)

ACCESSORIES

HardieGlaze 6mm Naturally Anodised

HardieGlaze 6mm 2700mm Cap Aluminium WhiteCODE: 305751 (PK - 1)

HardieGlaze 6mm 2700mm Internal Corner Aluminium WhiteCODE: 305749 (PK - 1)

HardieGlaze 6mm 2700mm External Corner Aluminium WhiteCODE: 305748 (PK - 1)

HardieGlaze 6mm 2700mm Jointer Aluminium WhiteCODE: 305750 (PK - 1)

ACCESSORIES

HardieGlaze 6mm Powder Coated White


PR

EFINISH

ED LIN

ING

S

Inraw Panels are pre-finished panels made from premium fibre cement, they have a raw, natural concrete aesthetic. Inraw panels are produced using UV coating technology. The panels are fully cured using UV light, they provide good resistance to abrasion, wear and light surface scratching.

ApplicationInraw Panels are easy to install and perfect for interior dry wall applications only such as ceiling and wall linings. They can be used in high-traffic areas in homes, commercial spaces and office areas.

Key Features and Benefits• Durable internal lining suitable for internal dry areas • Appropriate for both commercial and residential


classification of ‘Group 1-S’• Hard wearing coating offers improved chemical

resistance• Provides good resistance to abrasion, wear and light

surface scratching• Resistant to general stains• Easy to install straight onto framing or over existing


´ Refer to the Inraw Panel Installation Manual for further construction information.

NATURALLY ANODISED

Jointer Aluminium, 2700mm longCODE: 304506 (PK - 1)

Cap Aluminium, 2700mm longCODE: 304500 (PK - 1)

Internal Corner Aluminium, 2700mm longCODE: 304504 (PK - 1)

External Corner Aluminium, 2700mm longCODE: 304502 (PK - 1)

Negative Jointer Aluminium, 2700mm longCODE: 305752 (PK - 1)

Sheet Jointer Dry 2700mm longCODE: 305680 (PK - 1)

James Hardie 2 Sided Adhesive Tape 12mm x 33mCODE: 305433

ACCESSORIES

SIZE NAME CODE

2700 x 1200 x 6mm INraw Panel Natural 101 Satin

404626

INraw Panel Natural 101 Gloss

404627

INraw Panel

Come in 2 units per pack


INraw Panel


Invibe Panels are pre-finished panels made from premium fibre cement, they are characterised by a range of lustrous colours. Invibe Panels are produced using UV coating technology. The paint contains no Volatile Organic Compounds and is fully cured using UV light. The panels provide good resistance to abrasion, wear and light surface scratching.

ApplicationThey are suitable for use in wet, semi-wet or dry areas such as bathrooms, ensuites, toilets, kitchens, shower rooms, laundries, and changing rooms. They can be used in both residential and commercial spaces.

Key Features and Benefits• Durable internal lining suitable for internal wet and dry

areas • Appropriate for both commercial and residential


classification of ‘Group 1-S’• Hard wearing coating offers improved chemical

resistance• Provides good resistance to abrasion, wear and light

surface scratching• Resistant to general stains• Easy to install straight onto framing or over existing


´ Owing to manufacturing tolerances, slight colour variations are also likely to occur between different batches of lining.

INvibe Panel

PR

EFINISH

ED LIN

ING

S

INvibe Panel


SIZE

2700 x 1200 x 6mm

COLOUR NAME CODE UNITS PER PACK

Blanc201 Invibe Panel Blanc 201 Satin 404622 2

Invibe Panel Blanc 201 Gloss 404623 2

Ebony202 Invibe Panel Ebony 202 Satin 404624 2

Invibe Panel Ebony 202 Gloss 404625 2

Stone204 Invibe Panel Stone 204 Satin 404628 2

Invibe Panel Stone 204 Gloss 404629 2

Toast205 Invibe Panel Toast 205 Satin 404630 2

Invibe Panel Toast 205 Gloss 404631 2

Pewter206 Invibe Panel Pewter 206 Satin 404632 2

Invibe Panel Pewter 206 Gloss 404633 2

Greige207 Invibe Panel Greige 207 Satin 404634 2

Invibe Panel Greige 207 Gloss 404635 2

Coco208 Invibe Panel Coco 208 Satin 404636 2

Invibe Panel Coco 208 Gloss 404637 2

Flannel209 Invibe Panel Flannel 209 Satin 404638 2

Invibe Panel Flannel 209 Gloss 404639 2

Spring210 Invibe Panel Spring 210 Satin 404640 2

Invibe Panel Spring 210 Gloss 404641 2

Russet211 Invibe Panel Russet 211 Satin 404642 2

Invibe Panel Russet 211 Gloss 404643 2

Rouge212 Invibe Panel Rouge 212 Satin 404644 2

Invibe Panel Rouge 212 Gloss 404645 2

Turquoise213 Invibe Panel Turquoise 213 Satin 404646 2

Invibe Panel Turquoise 213 Gloss 404647 2


Coco

208 Sheet jointer - dry area 2700mm 305692Sheet jointer - wet area 2700mm 305693Internal corner 2700mm 305694External corner 2700mm 305695Cap mould 2700mm 305696

Flannel


Spring


Russet


Rouge


Turquoise


Naturally Anodised

Sheet jointer - dry area 2700mm 305680Sheet jointer - wet area 2700mm 304506Internal corner 2700mm 304504External corner 2700mm 304502Cap mould 2700mm 304500

Negative jointer 2700mm 305752

Blanc

201 Sheet jointer - dry area 2700mm 305687

Sheet jointer - wet area 2700mm 305688

Internal corner 2700mm 305689

External corner 2700mm 305690

Cap mould 2700mm 305691

Ebony



Negative jointer 2700mm 305683




Stone






Toast






Pewter






Greige





Cap mould 2700mm 305706*Note: All aluminium naturally anodised mouldings and Ebony negative detail moulding are available ex stockAll powder coated mouldings are available ex stock.Large quantities would be indent only, with a 7 – 10 working day lead time.All powder coated mouldings are only available in a semi-gloss finish that can be used with the Inraw Panels and Invibe Panels.

Sheet Jointer Wet (pk - 1)

Sheet Jointer Dry (pk - 1)

Negative Jointer Dry (pk - 1)

Internal Corner (pk - 1)

External Corner (pk - 1)

Cap Mould (pk - 1)

ACCESSORIES SUPPLIED BY JAMES HARDIE INVIBE PANEL JOINTERS AND MOULDINGS

PR

EFINISH

ED LIN

ING

S


HardieFlex Eaves Lining is a versatile, durable, low cost, 4.5mm thick fibre cement sheet. One of its most appealing features is that it comes in larger sheet sizes to accommodate wider soffits. This results in a quicker installation time with less waste.

ApplicationSuitable for use in all eaves, verandahs, porches and carports. The sheets have an un-sanded finished surface, which is ideal for either semi-gloss acrylic or lightly textured semi-gloss coatings to match your design scheme.

Key Features and Benefits• Resistant to damage from moisture and rotting• Easy and fast to install• Can be cut to size easily with the HardieKnife,

minimising dust on site• Can be hand nailed or gun nailed• Classified as non-combustible material• Low maintenance• 15 year product warranty

´ Refer to the Eaves and Soffit Linings Installation Manual for further construction information.

ACCESSORIES


PVC External Corner 5mm 3000mmCODE: 300848 (pk - 25)2400mmCODE: 300846 (pk - 25)

PVC Internal Corner 5mm 3000mmCODE: 300868 (pk - 25)2400mmCODE: 300866 (pk - 25)

PVC Cap Mould 5mm 2400mmCODE: 300538 (pk - 25)


EAVES LINING

HardieFlex10 Eaves & soffits


4.5mm 3000 x 1200 400183 33

4.5mm 2700 x 1200 400185 66

4.5mm 2400 x 1200 400187 66

4.5mm 1800 x 1200 400190 33

4.5mm 2400 x 900 400194 33


HardieFlex Eaves Lining

EAVES & SO

FFITS


HardieGroove Lining lets you add a unique tongue and groove look to your eaves and soffits. Made of tough fibre cement board, it adds durability as well as timeless charm. It also retains its good looks year after year, even in the most demanding conditions.

ApplicationThe grooves are perfect for enhancing design lines for modern builds, and are equally at home on villa and bungalow renovations. HardieGroove Lining is particulary well suited to larger sized eaves, verandahs, porches and carports.


minimising dust on site• Sheets have a half groove lengthways along the edge

to provide concealed joints• Outstanding impact resistance so it retains its good

looks for years to come• Classified as non-combustible material• Low maintenance• 15 year product warranty


´ Refer to page 37 for HardieGroove Lining sizes and accessories.

LINING

HardieGroove

HardieGroove Lining


HardieGroove Lining

EAVES & SO

FFITS


HardieSoffit Linings are made from 4.5mm thick fibre cement, and are specifically manufactured for the narrow soffit around the perimeter of the house or building. The sheets have an un-sanded finish suitable for semi-gloss acrylics, lightly textured semi-gloss or high-gloss coatings.

ApplicationHardieSoffit Linings are the perfect economical option for all eaves, verandahs, porches and carports. The sheets can be uPVC jointed or the joints can be left expressed.


minimising dust on site• Classified as non-combustible material• Low maintenance• 15 year product warranty



4.5mm 2400 x 750 401946 66

4.5mm 2400 x 600 401947 132

4.5mm 2400 x 450 401948 66

ACCESSORIES

PVC Soffit Jointer 5mm 750mm CODE: 300921 (pk - 50)600mm CODE: 300920 (pk - 50)450mm CODE: 300919 (pk - 50)

PVC HardieJointer 5mm 3000mmCODE: 300733 (pk - 50)2400mmCODE: 300729 (pk - 50)


Soffit 4.5mm PVC 2 Way Jointer 2400mmCODE: 300915 (pk - 10)


LINING

HardieSoffit


HardieSoffit Lining

EAVES & SO

FFITS


When you have the need for a large area of exterior coverage, look no further than Villaboard Lining. Its sophisticated flush finish created with recessed edges and easy jointing can be used for many purposes on your home and are perfect for larger soffits and eaves.

ApplicationVillaboard Lining can be used for new builds, renovations and extensions. The product can also be used for eaves, soffits, large carports and verandahs.


minimising dust on site• Available in 6mm and 9mm thicknesses that are

specially formulated to minimise sheet movement• Square edge or recessed edge available• Can be hand nailed or gun nailed• Classified as non-combustible material• Low maintenance• 15 year product warranty

´ Refer to pages 39 and 41 for Villaboard Lining sizes and accessories.


LINING

Villaboard

Villaboard Lining


Villaboard Lining

EAVES & SO

FFITS



4.5mm 2400 x 1200 404808 30

4.5mm 2400 x 600 404807 30

ACCESSORIES

Fastfix Fasteners (Xmas Trees) PVC White (100/Bag)CODE: 300632

PVC Hardiejointer 5mm2400mmCODE: 300729 (pk - 50)PVC Soffit Jointer 5mm600mmCODE: 300920 (pk - 50)

Soffit 4.5mm PVC 2 Way Jointer 2400mm CODE: 300915 (pk - 10)

Soffit Scotia Mould PVC 2400mm 2pce Base and CapCODE: 300916 (pk - 10)


Eclipsa Eaves Lining

Eclipsa Eaves Lining are pre-painted sheets made from 4.5mm thick fibre cement. Our Eclipsa Eaves lining is specifically designed to line eaves and soffits in residential homes and comes as a pre-painted, smooth, flat sheet. The speed at which Eclipsa Eaves pre-cut sheets can be joined and installed makes them a cost-effective coverage solution.

ApplicationEclipsa Eaves Lining is ideal for eaves, soffits, verandahs, porches, carports and any ceiling area where a pre-finished, easy clean surface is required.

Key Features and Benefits• Resistant to damage from moisture and rotting• No painting costs save both time and money• A slip sheet minimises surface marks on paint during

transportation and installation• Easy and fast to install• Low maintenance• Available in a white acrylic finish• Classified as non-combustible material• 10 year coating warranty• 15 year product warranty


EAVES LINING

Eclipsa


HardiePanel Compressed Sheet is an 18mm thick, high density, fibre cement structural flooring substrate for ceramic tile finishes over timber or lightweight steel floor joists. The compressed fibre cement sheet structure delivers a high level of durability and stability and is non-combustible.

ApplicationIdeal for use as an internal substrate for tiled wet area floors and an external substrate for decking, balconies verandahs and pool surrounds. Making it an ideal flooring substrate for both residential and commercial buildings.

Key Features and Benefits• Resistant to water damage when installed and

maintained correctly• A reliable, moisture resistant, lightweight alternative to

masonry• The smooth finish makes it suitable for a variety of

finishes including flooring paints, textured coatings and tiles

• Outstanding performance under tiles• Classified as non-combustible material• 15 year product warranty

´ Refer to the Flooring Installation Manual for further construction information.


18mm 2400 x 1200 400094 1

18mm 1800 x 1200 400096 1

Compressed Sheet Screw S/S 316 50mmx10g (100/Jar)CODE: 300904


ACCESSORIES

11 Flooring

COMPRESSED SHEET

HardiePanel

FLOO

RIN

G


INTERIOR FLOORING

Secura

Secura Interior Flooring is a high performance structural floor, made from 19mm thick fibre cement, offering the robust feel of concrete with the speed of timber installation. It is engineered to address the complete range of performance needs for residential and light commercial floors. Secura Interior Flooring offers indoor comfort, quiet, solid floors and lasting peace of mind.

ApplicationUse as an interior flooring substrate under tile, vinyl or carpet over timber floor joists in both wet and dry areas.

Key Features and Benefits• Resistant to damage from moisture and rotting• Can be exposed for up to 90 days during construction• The tongue and groove joint removes the requirement

for blocking, speeding up the install process• Can be tiled directly without the need for underlay,

avoiding noticeable height differences from one floor finish to the next

• Secura Interior Flooring Fire & Acoustic flooring systems deliver a fire rating up to 60/60/60 FRR

• Can be gun nailed• Classified as non-combustible material• Can be used as a lightweight inter-tenancy floor• 15 year product warranty

´ Refer to the Secura Interior Flooring Installation Manual for further construction information.


19mm 2700 x 600 404260 20


EXTERIOR FLOORING

Secura

Secura Exterior Flooring is a 19mm thick structural tongue and groove fibre cement flooring panel. It’s engineered to provide long term durability and impact resistance required for external flooring applications.

ApplicationSecura Exterior Flooring is a substrate specifically engineered for use under exterior flooring applications such as balconies and decks to overlay with tiles.

Key Features and Benefits• Resistant to damage from moisture and rotting• Can be exposed for up to 90 days during construction• Tongue and groove jointing system which removes the

need for timber trimmers• Sealed on all sides with an advanced water resistant

coating• Minimises movement that causes tiles to crack• Can be gun nailed• Classified as non-combustible material• 15 year product warranty

´ Refer to the Secura Exterior Flooring Installation Manual for further construction information.


19mm 2700 x 600 404406 20

FLOO

RIN

G


UNDERLAY

Tile & Slate

Tile & Slate Underlay is a smooth fibre cement substrate for laying tiles, slate and vinyl over existing or new timber, particleboard, engineered timber or plywood floors. Tile & Slate Underlay is designed to protect the finished tile floor from movement that occurs naturally in wood based flooring products.

ApplicationSuitable for interior applications in wet areas, semi-wet and dry areas such as bathrooms, kitchens, laundries and living areas.

Key Features and Benefits• Pre-sealed to improve tile adhesion• Resistance to permanent damage from water when

installed and maintained correctly• The sheets come with a pre-marked nailing pattern,

which reduces the time the installer has to spend working out where to nail

• Can be gun nailed with underlay gun nails, which speeds up installation

• Minimises tile movement and potential tile cracking caused by the expansion and contraction of wood based substrates

• Can be cut to size easily with the HardieKnife, minimising dust on site

• Classified as non-combustible material• 15 year product warranty

´ Refer to the Flooring Installation Manual for further construction information.


6mm 1800 x 1200 403341 25

6mm 1800 x 900 400418 50

6mm 1800 x 600 404110 50

Annular Threaded Galvanised Nail 25x2.5mm (500g approx 400 per bag)CODE: 300390

ACCESSORIES


12 Fire & acoustic

James Hardie Mineral Insulation800 x 600mm x 90mm thick (2.4m2 per bale)CODE: 304904

JH Acoustic Floor Channel 40mmCODE: 305922

JH Acoustic CradleCODE: 305920

JH Flooring ShimsCODE: 305925

FIRE SYSTEM COMPONENTS

´ Refer to the Fire and Acoustic Design Manual for further construction information.

13 Tools

HardieBlade™ Diamond Tipped Circular Saw Blade 184mmCODE: 300660

HardieKnife™CODE: 305926

HardieBlade™ Diamond Tipped Circular Saw Blade 254mmCODE: 303375

CUTTING TOOLS

FIRE &

AC

OU

STIC


14 Product & coverage calculations

Note: The quantities obtained from these calculations are to be used as a guide only and should be checked against the plans before ordering.

Calculation Example

Weatherboards — Coverage CalculationsPRODUCT WIDTH EFFECTIVE

COVERCALCULATION FACTOR FOR LINEAL METRES

Linea Weatherboard 135 105 9.523Linea Weatherboard 150 120 8.333Linea Weatherboard 180 150 6.667Linea Oblique Weatherboard 200 175 5.714Linea Oblique Weatherboard 300 275 3.64Stria Cladding 405 380 2.62Smooth Weatherboard 180 150 6.667Smooth Weatherboard 240 210 4.763Smooth Weatherboard 305 275 3.64Frontier Weatherboard 245 215 4.651Frontier Weatherboard 310 280 3.571Rusticated Weatherboard 205 175 5.714

WEATHERBOARD TYPE CALCULATION FACTOR X NET AREA OF

WALLS = LINEAL METRES OF BOARDS 4.2 NUMBER OF

BOARDS

Linea Weatherboard 180mm 6.667 x 80m2 = 533 ÷ 4.2 127

WEATHERBOARD TYPE CALCULATION FACTOR X NET AREA OF

WALLS = LINEAL METRES OF BOARDS 4.2 NUMBER OF

BOARDS

James Hardie Weatherboard Smooth 180mm

6.667 x 80m2 = 533 ÷ 4.2 127

JAMES HARDIE WEATHERBOARD ACCESSORIES

Nails Lineal metres of boards x 0.007 = kg of nails

Concealed Back Soakers Narrow boards (180, 205mm wide) Lineal metres ÷ 6 Wide boards (240, 245, 310mm wide) Lineal metres ÷ 7 = No. Back Soakers

Sealant for Back Soakers No. of Back Soakers ÷ 20 = No. Tubes Sealant

External Corner Soakers Height of wall ÷ Effective cover x No. of External Corners = No. of Soakers

Internal and External: Corner Moulds One per corner (up to 3m high)

LINEA WEATHERBOARD ACCESSORIES

Nails Lineal metres of boards x 0.007 = kg of nails

Sealant for tongue and groove joint (Lineal metres ÷ 6) ÷ 30 = No. Tubes Sealant

External Corner Soakers Height of wall ÷ Effective cover x No. of External Corners = No. of Soakers

Internal and External: Corner Moulds One per corner (up to 4m high)


TITAN FACADE PANEL, EASYLAP PANEL, AXON PANEL TO CLD STRUCTURAL CAVITY BATTEN

Glue 2 sheets per tube

VILLABOARD LINING

James Hardie Base Coat 1kg of Base Coat will provide approximately 5 lm of standard jointsJames Hardie Top Coat 1kg of Top Coat will provide approximately 5.6 lm of standard joints

Woodscrews and nails Non-tiled applications 50/2.4m long, 55/2.7 long sheet or 60/3.0m long sheetTiled applications 74/2.4m long sheet, 82/2.7 long sheet or 90/3.0m long sheet

Glue 3 sheets per tube (Non-tiled applications only)

HARDIEGLAZE LINING, INRAW PANEL, INVIBE PANEL

Glue 2 sheets per tube

TILE AND SLATE UNDERLAY

Nails approx 3 sheets per 500g bag/18x12, approx 3.5 sheets per 500g bag/18x9, approx 5 sheets per 500g bag/18x6

FIRE & ACOUSTIC

PROD

UC

T & CO

VERAGE C

ALCU

LATION

S

Ask James HardieTM I Call 0800 808 868 I jameshardie.co.nzCopyright November 2018. © James Hardie New Zealand. TM and ® denotes a Trademark or Registered Mark owned by James Hardie Technology Limited.

november 2018 new zealand - jameshardie.co.nz · rab™ board secura™ exterior flooring secura™...

Documents