Printed in KoreaP/NO : MFL68026204 (1402-REV00)

CHASSIS : LA46B

MODEL : 42LB5800 42LB5800-UG

CAUTIONBEFORE SERVICING THE CHASSIS,READ THE SAFETY PRECAUTIONS IN THIS MANUAL.

LED TVSERVICE MANUAL

North/Latin America http://aic.lgservice.comEurope/Africa http://eic.lgservice.comAsia/Oceania http://biz.lgservice.com

Internal Use Only

- 2 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.Only for training and service purposes

CONTENTS

CONTENTS .............................................................................................. 2

PRODUCT SAFETY ................................................................................. 3

SPECIFICATION ....................................................................................... 4

ADJUSTMENT INSTRUCTION ................................................................ 9

BLOCK DIAGRAM .................................................................................. 18

EXPLODED VIEW .................................................................................. 19

SCHEMATIC CIRCUIT DIAGRAM ..............................................................

- 3 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.Only for training and service purposes

Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in the Schematic Diagram and Exploded View.It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent Shock, Fire, or other Hazards. Do not modify the original design without permission of manufacturer.

General Guidance

An isolation Transformer should always be used during the servicing of a receiver whose chassis is not isolated from the AC power line. Use a transformer of adequate power rating as this protects the technician from accidents resulting in personal injury from electrical shocks.

It will also protect the receiver and it's components from being damaged by accidental shorts of the circuitry that may be inadvertently introduced during the service operation.

If any fuse (or Fusible Resistor) in this TV receiver is blown, replace it with the specified.

When replacing a high wattage resistor (Oxide Metal Film Resistor, over 1 W), keep the resistor 10 mm away from PCB.

Keep wires away from high voltage or high temperature parts.

Before returning the receiver to the customer,

always perform an AC leakage current check on the exposed metallic parts of the cabinet, such as antennas, terminals, etc., to be sure the set is safe to operate without damage of electrical shock.

Leakage Current Cold Check(Antenna Cold Check)With the instrument AC plug removed from AC source, connect an electrical jumper across the two AC plug prongs. Place the AC switch in the on position, connect one lead of ohm-meter to the AC plug prongs tied together and touch other ohm-meter lead in turn to each exposed metallic parts such as antenna terminals, phone jacks, etc. If the exposed metallic part has a return path to the chassis, the measured resistance should be between 1 MΩ and 5.2 MΩ. When the exposed metal has no return path to the chassis the reading must be infinite.An other abnormality exists that must be corrected before the receiver is returned to the customer.

Leakage Current Hot Check (See below Figure) Plug the AC cord directly into the AC outlet.

Do not use a line Isolation Transformer during this check. Connect 1.5 K / 10 watt resistor in parallel with a 0.15 uF capacitor between a known good earth ground (Water Pipe, Conduit, etc.) and the exposed metallic parts.Measure the AC voltage across the resistor using AC voltmeter with 1000 ohms/volt or more sensitivity.Reverse plug the AC cord into the AC outlet and repeat AC voltage measurements for each exposed metallic part. Any voltage measured must not exceed 0.75 volt RMS which is corresponds to 0.5 mA.In case any measurement is out of the limits specified, there is possibility of shock hazard and the set must be checked and repaired before it is returned to the customer.

Leakage Current Hot Check circuit

IMPORTANT SAFETY NOTICE

SAFETY PRECAUTIONS

- 4 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.Only for training and service purposes

SERVICING PRECAUTIONSCAUTION: Before servicing receivers covered by this service manual and its supplements and addenda, read and follow the SAFETY PRECAUTIONS on page 3 of this publication.NOTE: If unforeseen circumstances create conflict between the following servicing precautions and any of the safety precautions on page 3 of this publication, always follow the safety precautions. Remember: Safety First.

General Servicing Precautions1. Always unplug the receiver AC power cord from the AC power

source before;a. Removing or reinstalling any component, circuit board mod-

ule or any other receiver assembly.b. Disconnecting or reconnecting any receiver electrical plug or

other electrical connection.c. Connecting a test substitute in parallel with an electrolytic

capacitor in the receiver.CAUTION: A wrong part substitution or incorrect polarity installation of electrolytic capacitors may result in an explo-sion hazard.

2. Test high voltage only by measuring it with an appropriate high voltage meter or other voltage measuring device (DVM, FETVOM, etc) equipped with a suitable high voltage probe.Do not test high voltage by "drawing an arc".

3. Do not spray chemicals on or near this receiver or any of its assemblies.

4. Unless specified otherwise in this service manual, clean electrical contacts only by applying the following mixture to the contacts with a pipe cleaner, cotton-tipped stick or comparable non-abrasive applicator; 10 % (by volume) Acetone and 90 % (by volume) isopropyl alcohol (90 % - 99 % strength)CAUTION: This is a flammable mixture.Unless specified otherwise in this service manual, lubrication of contacts in not required.

5. Do not defeat any plug/socket B+ voltage interlocks with which receivers covered by this service manual might be equipped.

6. Do not apply AC power to this instrument and/or any of its electrical assemblies unless all solid-state device heat sinks are correctly installed.

7. Always connect the test receiver ground lead to the receiver chassis ground before connecting the test receiver positive lead.Always remove the test receiver ground lead last.

8. Use with this receiver only the test fixtures specified in this service manual.CAUTION: Do not connect the test fixture ground strap to any heat sink in this receiver.

Electrostatically Sensitive (ES) DevicesSome semiconductor (solid-state) devices can be damaged eas-ily by static electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor “chip” components. The following techniques should be used to help reduce the incidence of component dam-age caused by static by static electricity.1. Immediately before handling any semiconductor component or

semiconductor-equipped assembly, drain off any electrostatic charge on your body by touching a known earth ground. Alter-natively, obtain and wear a commercially available discharging wrist strap device, which should be removed to prevent poten-tial shock reasons prior to applying power to the unit under test.

2. After removing an electrical assembly equipped with ES devices, place the assembly on a conductive surface such as aluminum foil, to prevent electrostatic charge buildup or expo-sure of the assembly.

3. Use only a grounded-tip soldering iron to solder or unsolder ES devices.

4. Use only an anti-static type solder removal device. Some solder removal devices not classified as “anti-static” can generate electrical charges sufficient to damage ES devices.

5. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ES devices.

6. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it. (Most replacement ES devices are packaged with leads electri-cally shorted together by conductive foam, aluminum foil or comparable conductive material).

7. Immediately before removing the protective material from the leads of a replacement ES device, touch the protective material to the chassis or circuit assembly into which the device will be installed.CAUTION: Be sure no power is applied to the chassis or circuit, and observe all other safety precautions.

8. Minimize bodily motions when handling unpackaged replace-ment ES devices. (Otherwise harmless motion such as the brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can generate static electricity suf-ficient to damage an ES device.)

General Soldering Guidelines1. Use a grounded-tip, low-wattage soldering iron and appropriate

tip size and shape that will maintain tip temperature within the range or 500 °F to 600 °F.

2. Use an appropriate gauge of RMA resin-core solder composed of 60 parts tin/40 parts lead.

3. Keep the soldering iron tip clean and well tinned.4. Thoroughly clean the surfaces to be soldered. Use a mall wire-

bristle (0.5 inch, or 1.25 cm) brush with a metal handle.Do not use freon-propelled spray-on cleaners.

5. Use the following unsoldering techniquea. Allow the soldering iron tip to reach normal temperature.

(500 °F to 600 °F)b. Heat the component lead until the solder melts.c. Quickly draw the melted solder with an anti-static, suction-

type solder removal device or with solder braid.CAUTION: Work quickly to avoid overheating the circuit board printed foil.

6. Use the following soldering technique.a. Allow the soldering iron tip to reach a normal temperature

(500 °F to 600 °F)b. First, hold the soldering iron tip and solder the strand against

the component lead until the solder melts.c. Quickly move the soldering iron tip to the junction of the

component lead and the printed circuit foil, and hold it there only until the solder flows onto and around both the compo-nent lead and the foil.CAUTION: Work quickly to avoid overheating the circuit board printed foil.

d. Closely inspect the solder area and remove any excess or splashed solder with a small wire-bristle brush.

- 5 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.Only for training and service purposes

IC Remove/ReplacementSome chassis circuit boards have slotted holes (oblong) through which the IC leads are inserted and then bent flat against the cir-cuit foil. When holes are the slotted type, the following technique should be used to remove and replace the IC. When working with boards using the familiar round hole, use the standard technique as outlined in paragraphs 5 and 6 above.

Removal1. Desolder and straighten each IC lead in one operation by

gently prying up on the lead with the soldering iron tip as the solder melts.

2. Draw away the melted solder with an anti-static suction-type solder removal device (or with solder braid) before removing the IC.

Replacement1. Carefully insert the replacement IC in the circuit board.2. Carefully bend each IC lead against the circuit foil pad and

solder it.3. Clean the soldered areas with a small wire-bristle brush.

(It is not necessary to reapply acrylic coating to the areas).

"Small-Signal" Discrete TransistorRemoval/Replacement1. Remove the defective transistor by clipping its leads as close

as possible to the component body.2. Bend into a "U" shape the end of each of three leads remaining

on the circuit board.3. Bend into a "U" shape the replacement transistor leads.4. Connect the replacement transistor leads to the corresponding

leads extending from the circuit board and crimp the "U" with long nose pliers to insure metal to metal contact then solder each connection.

Power Output, Transistor DeviceRemoval/Replacement1. Heat and remove all solder from around the transistor leads.2. Remove the heat sink mounting screw (if so equipped).3. Carefully remove the transistor from the heat sink of the circuit

board.4. Insert new transistor in the circuit board.5. Solder each transistor lead, and clip off excess lead.6. Replace heat sink.

Diode Removal/Replacement1. Remove defective diode by clipping its leads as close as pos-

sible to diode body.2. Bend the two remaining leads perpendicular y to the circuit

board.3. Observing diode polarity, wrap each lead of the new diode

around the corresponding lead on the circuit board.4. Securely crimp each connection and solder it.5. Inspect (on the circuit board copper side) the solder joints of

the two "original" leads. If they are not shiny, reheat them and if necessary, apply additional solder.

Fuse and Conventional ResistorRemoval/Replacement1. Clip each fuse or resistor lead at top of the circuit board hollow

stake.2. Securely crimp the leads of replacement component around

notch at stake top.

3. Solder the connections.CAUTION: Maintain original spacing between the replaced component and adjacent components and the circuit board to prevent excessive component temperatures.

Circuit Board Foil RepairExcessive heat applied to the copper foil of any printed circuit board will weaken the adhesive that bonds the foil to the circuit board causing the foil to separate from or "lift-off" the board. The following guidelines and procedures should be followed whenever this condition is encountered.

At IC ConnectionsTo repair a defective copper pattern at IC connections use the following procedure to install a jumper wire on the copper pattern side of the circuit board. (Use this technique only on IC connec-tions).

1. Carefully remove the damaged copper pattern with a sharp knife. (Remove only as much copper as absolutely necessary).

2. carefully scratch away the solder resist and acrylic coating (if used) from the end of the remaining copper pattern.

3. Bend a small "U" in one end of a small gauge jumper wire and carefully crimp it around the IC pin. Solder the IC connection.

4. Route the jumper wire along the path of the out-away copper pattern and let it overlap the previously scraped end of the good copper pattern. Solder the overlapped area and clip off any excess jumper wire.

At Other ConnectionsUse the following technique to repair the defective copper pattern at connections other than IC Pins. This technique involves the installation of a jumper wire on the component side of the circuit board.

1. Remove the defective copper pattern with a sharp knife.Remove at least 1/4 inch of copper, to ensure that a hazardous condition will not exist if the jumper wire opens.

2. Trace along the copper pattern from both sides of the pattern break and locate the nearest component that is directly con-nected to the affected copper pattern.

3. Connect insulated 20-gauge jumper wire from the lead of the nearest component on one side of the pattern break to the lead of the nearest component on the other side.Carefully crimp and solder the connections.CAUTION: Be sure the insulated jumper wire is dressed so the it does not touch components or sharp edges.

- 6 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.Only for training and service purposes

SPECIFICATIONNOTE : Specifications and others are subject to change without notice for improvement.

1. Application range1.1. This spec sheet is applied all of the 32”, 39”, 42”, 47”, 50”,

55”, 60, 65” LED TV with LA46B chassis.1.2. Not included spec and each product spec in this spec

sheet apply correspondingly to the following each country standard and requirement of Buyer

2. Test conditionEach part is tested as below without special notice.

1) Temperature : 20 ºC ± 5 ºC2) Relative Humidity: 65 % ± 10 %3) Power Voltage

Market Input voltage Frequency Remark

USA 110~240V 50/60Hz Standard Voltage of each product is marked by models

4) Specification and performance of each parts are followed each drawing and specification by part number in accordance with BOM

5) The receiver must be operated for about 20 minutes prior to the adjustment

3. Test method1) Performance: LGE TV test method followed 2) Demanded other specification

- Safety : UL, CSA, IEC specification- EMC: FCC, ICES, IEC specification- Wireless : WirelessHD Specification (Option)

- 7 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.Only for training and service purposes

4. General SpecificationNo Item Specification Remark

1 Market 1) North America

2 Television System NTSC-M, ATSC, 64 & 256 QAM

3 Input Voltage AC 100 ~ 240V 50/60Hz

4 Available Channel 1) VHF : 02~132) UHF : 14~693) DTV : 02-694) CATV : 01~1355) CADTV : 01~135

5 Aspect Ratio 16:9

6 Tuning System FS

7 LCD Module LC550DUE-FGA3 LGD 55LB5800-UA

T500HVF05.0 AUO 50LB5800-UA

LC550DUE-FGA4 LGD 55LB6100-UG

LC500DUE-FGA4 LGD 50LB5800-UG, 50LB6100-UG

LC470DUE-FGA4 LGD 47LB5800-UG, 47LB6100-UG

LC420DUE-FGA4 LGD 42LB5800-UG

LC650DUF-FGA1 LGD 65LB6190-UD

HC600DUF-VHHS2 Sharp 60LB6100-UG

T550HVF04.2 AUO 55LB6100-UG/55LB5800-UG

NC500DUN-VXBP2 INX 50LB6100-UG/50LB5800-UG

T420HVF07.0 AUO 42LB5800-UG

NC390DUN-VXBP2 INX 39LB5800-UG

LC320DUE-FGA4 LGD 32LB5800-UG

NC320DXN-VSBP2 Sharp 32LB580B-UG

LC320DXE-FGA4 LGD 32LB580B-UG

8 Operating Environment 1) Temp : 0 ~ 40 deg2) Humidity : ~ 80 %

9 Storage Environment 1) Temp : -20 ~ 60 deg2) Humidity : ~ 85 %

- 8 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.Only for training and service purposes

5. Supported video resolutions5.1. Component 2D input(Y, CB/PB, CR/PR)

No Resolution H-freq(kHz) V-freq.(Hz) Pixel clock(MHz) Proposed

1. 720*480 15.73 60 13.5135 SDTV ,DVD 480I

2. 720*480 15.73 59.94 13.5 SDTV ,DVD 480I

3. 720*480 31.50 60 27.027 SDTV 480P

4. 720*480 31.47 59.94 27.0 SDTV 480P

5. 1280*720 45.00 60.00 74.25 HDTV 720P

6. 1280*720 44.96 59.94 74.176 HDTV 720P

7. 1920*1080 33.75 60.00 74.25 HDTV 1080I

8. 1920*1080 33.72 59.94 74.176 HDTV 1080I

9. 1920*1080 26.97 23.976 74.176 HDTV 1080P

10. 1920*1080 27.00 24.00 74.25 HDTV 1080P

11. 1920*1080 33.71 29.97 74.176 HDTV 1080P

12. 1920*1080 33.75 30.00 74.25 HDTV 1080P

13. 1920*1080 67.432 59.94 148.352 HDTV 1080P

14. 1920*1080 67.50 60 148.50 HDTV 1080P

5.2. HDMI Input (PC/DTV)

No. Resolution H-freq(kHz) V-freq.(kHz) Pixel clock(MHz) Proposed

PC DDC

1 640*350 31.468 70.09 25.17 EGA X

2 720*400 31.469 70.08 28.32 DOS O

3 640*480 31.469 59.94 25.17 VESA(VGA) O

4 800*600 37.879 60.31 40.00 VESA(SVGA) O

5 1024*768 48.363 60.00 65.00 VESA(XGA) O

6 1152*864 54.348 60.053 80.002 VESA O

7 1360*768 47.712 60.015 85.50 VESA (WXGA) X

8 1280*1024 63.981 60.020 108.00 VESA (SXGA) O

9 1920*1080 67.5 60 148.5 HDTV 1080P O

DTV

1 720*480 31.50 60 27.027 SDTV 480P

2 720*480 31.469 59.94 27.00 SDTV 480P

3 1280*720 45.00 60.00 74.25 HDTV 720P

4 1280*720 44.96 59.94 74.176 HDTV 720P

5 1920*1080 33.75 60.00 74.25 HDTV 1080I

6 1920*1080 33.72 59.94 74.176 HDTV 1080I

7 1920*1080 67.500 60 148.50 HDTV 1080P

8 1920*1080 67.43 59.94 148.352 HDTV 1080P

9 1920*1080 27.000 24.000 74.25 HDTV 1080P

10 1920*1080 26.97 23.97 74.176 HDTV 1080P

11 1920*1080 33.75 30.000 74.25 HDTV 1080P

12 1920*1080 33.716 29.976 74.176 HDTV 1080P

- 9 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.Only for training and service purposes

ADJUSTMENT INSTRUCTION1. Application

This spec. sheet applies to LA46B Chassis applied LED TV all models manufactured in TV factory

2. Specification(1) Because this is not a hot chassis, it is not necessary to use

an isolation transformer. However, the use of isolation transformer will help protect test instrument.

(2) Adjustment must be done in the correct order.(3) The adjustment must be performed in the circumstance of

25 ±5 ºC of temperature and 65±10% of relative humidity if there is no specific designation

(4) The input voltage of the receiver must keep 100~240V, 50/60Hz

(5) At first Worker must turn on the SET by using Power Only key.

(6) The receiver must be operated for about 5 minutes prior to the adjustment when module is in the circumstance of over 15 ºC

In case of keeping module is in the circumstance of 0°C, it should be placed in the circumstance of above 15°C for 2 hours

In case of keeping module is in the circumstance of below -20°C, it should be placed in the circumstance of above 15°C for 3 hours.

※ CautionWhen still image is displayed for a period of 20 minutes or longer (especially where W/B scale is strong.Digital pattern 13ch and/or Cross hatch pattern 09ch), there can some afterimage in the black level area

3. Adjustment items3.1. Final assembly adjustment

(1) White Balance adjustment(2) RS-232C functionality check(3) Factory Option setting per destination(4) Shipment mode setting (In-Stop)(5) GND and HI-POT test

3.2. Appendix(1) Tool option menu, USB Download (S/W Update, Option

and Service only)(2) Manual adjustment for ADC calibration and White balance.(3) Shipment conditions, Channel pre-set

4. MAIN PCBA Adjustments4.1. ADC Calibration

- An ADC calibration is not necessary because MAIN SoC (LGExxxx) is already calibrated from IC Maker

4.2. MAC Address, ESN Key and Widevine Key, DTCP Key, HDCP1.4, HDCP2.0 download

4.2.1. Equipment & Condition1) Play file: keydownload.exe

4.2.2. Communication Port connection1) Key Write: Com 1,2,3,4 and 115200 (Baudrate)2) Barcode: Com 1,2,3,4 and 9600 (Baudrate)

4.2.3. Download process1) Select the download items.2) Mode check: Online Only3) Check the test process- US, Canada models: DETECT -> MAC_WRITE ->

WIDEVINE_WRITE4) Play : START5) Check of result: Ready, Test, OK or NG6) Printer out (MAC Address Label)

4.2.4. Communication Port connection1) Connect: PCBA Jig -> RS-232C Port == PC -> RS-232C

Port

4.2.5. Download1) US, Canada models (14Y LED TV + MAC + Widevine +

ESN Key + DTCP Key + HDCP1.4 and HDCP2.0)

4.2.6. Inspection- In INSTART menu, check these keys.

- 10 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.Only for training and service purposes

4.3. LAN port Inspection (Ping Test)4.3.1. Equipment setting

1) Play the LAN Port Test PROGRAM.2) Input IP set up for an inspection to Test Program. - IP number: 12.12.2.2

4.3.2. LAN PORT inspection (PING TEST)1) Play the LAN Port Test Program.2) Connect each other LAN Port Jack.3) Play Test (F9) button and confirm OK Message.4) Remove LAN CABLE

4.4. EDID Download4.4.1 Overview

It is a VESA regulation. A PC or a MNT will display an optimal resolution through information sharing without any necessity of user input. It is a realization of “Plug and Play”.

4.4.2 Equipment Since embedded EDID data is used, EDID download JIG,

HDMI cable and D-sub cable are not need. Adjust remocon

4.4.3. EDID DATA4.4.3.1. . 2D_8bit_PCM(US) _ xvYCC : off (HD)

HDMI EDID 2D_8bit_PCM(US)_xvYCC : off (HD)

Reference- HDMI1 ~ HDMI3- In the data of EDID, bellows may be different by S/W or Input

mode.

Product ID

HEX EDID Table DDC Function

0001 0100 Analog

0001 0100 Digital

Serial No: Controlled on production line. Month, Year: Controlled on production line: ex) Monthly : ‘01’ -> ‘01’ Year : ‘2014’ -> ‘18’ Model Name(Hex): LGTV

Chassis MODEL NAME(HEX)

LA46B 00 00 00 FC 00 4C 47 20 54 56 0A 20 20 20 20 20 20 20

Checksum(LG TV): Changeable by total EDID data.

1 2 3

HDMI1 A5 0C X

HDMI2 A5 FC X

HDMI3 A5 EC X

Vendor Specific(HDMI)

INPUT MODEL NAME(HEX)

HDMI1 67 03 0C 00 10 00 80 1E

HDMI2 67 03 0C 00 20 00 80 1E

HDMI3 67 03 0C 00 30 00 80 1E

- 11 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.Only for training and service purposes

4.4.3.2. 2D_8bit_PCM(US) _ xvYCC : offHDMI EDID 2D_8bit_PCM(US)_xvYCC : off

Reference- HDMI1 ~ HDMI3- In the data of EDID, bellows may be different by S/W or Input

mode.

Product ID

HEX EDID Table DDC Function

0001 0100 Analog

0001 0100 Digital

Serial No: Controlled on production line. Month, Year: Controlled on production line: ex) Monthly : ‘01’ -> ‘01’ Year : ‘2014’ -> ‘18’ Model Name(Hex): LGTV

Chassis MODEL NAME(HEX)

LA46B 00 00 00 FC 00 4C 47 20 54 56 0A 20 20 20 20 20 20 20

Checksum(LG TV): Changeable by total EDID data.

1 2 3

HDMI1 E7 1C X

HDMI2 E7 0C X

HDMI3 E7 FC X

Vendor Specific(HDMI)

INPUT MODEL NAME(HEX)

HDMI1 67 03 0C 00 10 00 80 1E

HDMI2 67 03 0C 00 20 00 80 1E

HDMI3 67 03 0C 00 30 00 80 1E

4.4.3.3. 2D_10bit_PCM(US) _ xvYCC : off HDMI EDID 2D_10bit_PCM(US)_xvYCC : off

Reference- HDMI1 ~ HDMI3- In the data of EDID, bellows may be different by S/W or Input

mode.

Product ID

HEX EDID Table DDC Function

0001 0100 Analog

0001 0100 Digital

Serial No: Controlled on production line. Month, Year: Controlled on production line: ex) Monthly : ‘01’ -> ‘01’ Year : ‘2014’ -> ‘18’ Model Name(Hex): LGTV

Chassis MODEL NAME(HEX)

LA46B 00 00 00 FC 00 4C 47 20 54 56 0A 20 20 20 20 20 20 20

Checksum(LG TV): Changeable by total EDID data.

1 2 3

HDMI1 E7 02 X

HDMI2 E7 F2 X

HDMI3 E7 E2 X

Vendor Specific(HDMI)

INPUT MODEL NAME(HEX)

HDMI1 67 03 0C 00 10 00 B8 2D

HDMI2 67 03 0C 00 20 00 B8 2D

HDMI3 67 03 0C 00 30 00 B8 2D

- 12 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.Only for training and service purposes

5. Final Assembly Adjustment5.1. White Balance Adjustment5.1.1. Overview

5.1.1.1. W/B adj. Objective & How-it-works(1) Objective: To reduce each Panel’s W/B deviation(2) How-it-works: When R/G/B gain in the OSD is at 192, it

means the panel is at its Full Dynamic Range. In order to prevent saturation of Full Dynamic range and data, one of R/G/B is fixed at 192, and the other two is lowered to find the desired value.

(3) Adj. condition: normal temperature- Surrounding Temperature: 25±5 °C- Warm-up time: About 5 Min- Surrounding Humidity: 20% ~ 80%- Before White balance adjustment, Keep power on status,

don’t power off 5.1.1.2. Adj. condition and cautionary items(1) Lighting condition in surrounding area surrounding lighting

should be lower 10 lux. Try to isolate adj. area into dark surrounding.

(2) Probe location: Color Analyzer (CA-210) probe should be within 10cm and perpendicular of the module surface

(80°~ 100°)(3) Aging time- After Aging Start, Keep the Power ON status during 5 Minutes.

- In case of LCD, Back-light on should be checked using no signal or Full-white pattern.

5.1.2. Equipment(1) Color Analyzer: CA-210 (NCG: CH 9 / WCG: CH12 / LED:

CH14)(2) Adj. Computer (During auto adj., RS-232C protocol is

needed)(3) Adjust Remocon(4) Video Signal Generator MSPG-925F 720p/204-Gray

(Model: 217, Pattern: 49) ※ Color Analyzer Matrix should be calibrated using CS-1000

5.1.3. Equipment connection

5.1.4. Adjustment Command (Protocol)(1) RS-232C Command used during auto-adj.

RS-232C COMMANDExplanation

CMD DATA ID

Wb 00 00 Begin White Balance adj.

Wb 00 ff End White Balance adj. (internal pattern disappears )

(2) Adjustment MapAdj. item Command

(lower caseASCII)Data Range(Hex.)

CMD1 CMD2 MIN MAX

Cool R Gain j g 00 C0

G Gain j h 00 C0

B Gain j i 00 C0

Medium R Gain j a 00 C0

G Gain j b 00 C0

B Gain j c 00 C0

Warm R Gain j d 00 C0

G Gain j e 00 C0

B Gain j f 00 C0

5.1.5. Adjustment method5.1.5.1. Auto WB calibration

(1) Set TV in ADJ mode using P-ONLY key (or POWER ON key)

(2) Place optical probe on the center of the display - It need to check probe condition of zero calibration before

adjustment.(3) Connect RS-232C Cable(4) Select mode in ADJ Program and begin a adjustment.(5) When WB adjustment is completed with OK message,

check adjustment status of pre-set mode (Cool, Medium, Warm)

(6) Remove probe and RS-232C cable. W/B Adj. must begin as start command “wb 00 00” , and

finish as end command “wb 00 ff”, and Adj. offset if need

- 13 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.Only for training and service purposes

5.1.5.2. Manual adjustment(1) Set TV in Adj. mode using POWER ON (2) Zero Calibrate the probe of Color Analyzer, then place it on

the center of LCD module within 10cm of the surface.. (3) Press ADJ key -> EZ adjust using adj. R/C à 9. White-

Balance then press the cursor to the right (KEY). When KEY() is pressed 206 Gray internal pattern will be displayed.

(4) Adjust Cool modes(i) Fix the one of R/G/B gain to 192 (default data) and

decrease the others. ( If G gain is adjusted over 172 and R and B gain less than

192 , Adjust is O.K.) (ii) If G gain is less than 172, Increase G gain by up to 172, and then increase R gain and

G gain same amount of increasing G gain. (iii) If R gain or B gain is over 255, Readjust G gain less than 172, Conform to R gain is 255 or

B gain is 255 (5) Adjust two modes (Medium / Warm) Fix the one of R/G/B

gain to 192 (default data) and decrease the others. (6) Adj. is completed, Exit adjust mode using “EXIT” key on

Remote controller. If internal pattern is not available, use RF input. In EZ Adj.

menu. 6.White Balance, you can select one of 2 Test-pattern: ON, OFF. Default is inner (ON). By selecting OFF, you can adjust using RF signal in 206 Gray pattern.

5.1.6. Reference (White Balance Adj. coordinate and color temperature)

Luminance: 204 Gray, 80IRE Standard color coordinate and temperature using CS-1000

(over 26 inch)

ModeCoordinate

Temp uvX Y

Cool 0.271 0.270 13,000K 0.0000

Medium 0.286 0.289 9,300K 0.0000

Warm 0.313 0.329 6,500K 0.0000

Standard color coordinate and temperature using CA-210(CH 18) – ALEF

ModeCoordinate

Temp uvX Y

Cool 0.271±0.002 0.270±0.002 13,000K 0.0000

Medium 0.286±0.002 0.289±0.002 9,300K 0.0000

Warm 0.313±0.002 0.329±0.002 6,500K 0.0000

Standard color coordinate and temperature using CA-210(CH-14)

ModeCoordinate

Temp uvX Y

Cool 0.271±0.002 0.270±0.002 13,000K 0.0000

Medium 0.286±0.002 0.289±0.002 9,300K 0.0000

Warm 0.313±0.002 0.329±0.002 6,500K 0.0000

5.1.7. Reference (White balance table) Standard color coordinate and temperature using

CA-210(CH-14) – by aging time(1) Normal line in Korea (From January to February) LGD (LB5xxx, LB6xxx, LB7xxx, LB8xxx).

Aging time(Min)

Cool Medium Warm

X Y X Y X Y

271 270 286 289 313 329

1 0-2 286 295 301 314 328 354

2 3-5 284 290 299 309 326 349

3 6-9 282 287 297 306 324 346

4 10-19 279 283 294 302 321 342

5 20-35 276 278 291 297 318 337

6 36-49 274 275 289 294 316 334

7 50-79 273 272 288 291 315 331

8 80-119 272 271 287 290 314 330

9 Over 120 271 270 286 289 313 329

Standard color coordinate and temperature using CA-210(CH-14) – by aging time

(2) Normal line (From March to December) : LGD (LB5xxx, LB6xxx, LB7xxx, LB8xxx)

Aging time(Min)

Cool Medium Warm

X Y X Y X Y

271 270 286 289 313 329

1 0-2 282 289 297 308 324 348

2 3-5 281 287 296 306 323 346

3 6-9 279 284 294 303 321 343

4 10-19 277 280 292 299 319 339

5 20-35 275 277 290 296 317 336

6 36-49 274 274 289 293 316 333

7 50-79 273 272 288 291 315 331

8 80-119 272 271 287 290 314 330

9 Over 120 271 270 286 289 313 329

Standard color coordinate and temperature using CA-210(CH 14)

O/S Module (AUO, INX, Sharp, CSOT, BOE)cool med warm

x y x y x y

spec 271 270 286 289 313 329

target 278 280 293 299 320 339

- 14 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.Only for training and service purposes

5.2. Tool Option setting & Inspection per countries

5.2.1. Overview(1) Tool option selection is only done for models in Non-USA

North America due to rating(2) Applied model: LA46B Chassis applied to CANADA and

MEXICO

5.2.2. Country Group selection(1) Press ADJ key on the Adj. R/C, and then select Country

Group Menu(2) Depending on destination, select US, then on the lower

Country option, select US, CA, MX. Selection is done using +, - KEY

5.2.3. Tool Option inspection Press Adj. key on the Adj. R/C, then select Tool option

Model Tool 1 Tool 2 Tool 3 Tool 4 Tool 5 Tool 6 Tool 7

32LB580B-UG(Sharp) 6769 13329 33152 64070 4566 1353 41771

32LB580B-UG(LGD) 625 13329 33152 64070 4310 1354 41771

32LB5800-UG 625 13329 33152 64070 4310 1353 41771

39LB5800-UG 14963 13329 33152 64070 4566 1353 41771

42LB5800-UG(LGD) 628 13329 33152 64070 4310 1433 41771

42LB5800-UG(AUO) 4724 13329 33152 64070 4310 1353 41771

47LB5800-UG 629 13329 33152 64070 4310 1353 41771

50LB5800-UG(AUO) 4726 13329 33152 64070 4310 1353 41771

50LB5800-UG(INX) 14966 13329 33152 64070 4310 1353 41771

55LB5800-UG(LGD) 631 13329 33152 64070 4310 1402 41771

55LB5800-UA(AUO) 4727 13329 33152 64070 4310 1353 41771

47LB6100-UG 677 13329 33152 64070 12502 1353 41771

50LB6100-UG(LGD) 678 13329 33152 64070 12502 1353 41771

50LB6100-UG(AUO) 4774 13329 33152 64070 12502 1353 41771

50LB6100-UG(INX) 15014 13329 33152 64070 12502 1353 41771

55LB6100-UG(LGD) 679 13329 33152 64070 12502 1402 41771

55LB6100-UG(AUO) 4775 13329 33152 64070 12502 1353 41771

60LB6100-UG 39592 13329 33152 64070 12502 1353 41771

65LB6190-UD 34467 13329 33152 64070 12502 1353 41771

※ Tool option can be reconstructed by Software

5.3. Magic Motion remote controller Check 5.3.1. Test equipment

RF-remote controller for check, IR-KEY-CODE remote controller.

Check AA battery before test. A recommendation is that a tester change battery every lots.

5.3.2. Test(1) Make pairing with TV set by pressing “Start key(Wheel

key)” on RCU.(2) Check a cursor on screen by pressing ‘Wheel key” of RCU(3) Stop paring with TV set by pressing “Back+ Home” key of

RCU

5.3.3. Applied modelsChassis Model Name Magic RF receiver

LA46B 32LB580B-UG Dongle

32/39/42/47/50/55LB5800-UG

47/50/55/60LB6100-UG

※ Dongle Model : An USB dongle-type receiver will be supplied in form of accessory. So this pairing test is not necessary for these models

5.4. Wi-Fi MAC Address Check 5.4.1. Using RS232 Command

Command Set ACK

Transmission [A][l][][Set ID][][20][Cr] [O][K][x] or [N][G]

5.4.2. Check the menu on in-start

- 15 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.Only for training and service purposes

5.5. HDMI ARC Function Inspection 5.5.1. Test equipment

- Optic Receiver Speaker - MSHG-600 (SW: 1220 ↑) - HDMI Cable (for 1.4 version)

5.5.2. Test method(1) Insert the HDMI Cable to the HDMI ARC port from the

master equipment (HDMI1)

(2) Check the sound from the TV Set

(3) Check the Sound from the Speaker or using AV & Optic TEST program (It’s connected to MSHG-600)

* Remark: Inspect in Power Only Mode and check SW version in a master equipment

5.6. HDMI MHL Function Inspection 5.6.1. Test method

(1) Insert the HDMI Cable to the HDMI MHL port from the master equipment, HDMI3

(2) Check the Green LED of Tester, and TV Display

5.7. EYE-Q Green Function Inspection Step 1) Turn on the TV..Step 2) Press 'EYE button' on the adjustment remote-

controller.Step 3) Cover 'Eye Q sensor' on the front of set with your

hands, hold it for 6 seconds.Step 4) Check "the Sensor Data" on the screen, make certain

that Data is below 10. If Data isn’t below 10 in 6 seconds, Eye Q sensor would be bad. You should change Eye Q sensor.

Step 5) Uncover your hands from Eye Q sensor, hold it for 6 seconds.

Step 6) Check "Back Light(xxx)" on the screen, check data increase . You should change Eye Q sensor

5.8. Ship-out mode check (In-stop) After final inspection, press In-Stop key of the Adj. R/C and check that the unit goes to Stand-by mode

- 16 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.Only for training and service purposes

6. AUDIO output check6.1. Audio input condition

(1) RF input: Mono, 1KHz sine wave signal, 100% Modulation(2) CVBS, Component: 1KHz sine wave signal (0.4Vrms)(3) RGB PC: 1KHz sine wave signal (0.7Vrms)

6.2. SpecificationNo Item Min Typ Max Unit Remark

1 Audio practical max Output, L/R(Distor-tion=10% max Output)

9.08.5

10.08.9

12.09.9

WVrms

(1) Measurement condition

- EQ/AVL/Clear Voice: Off

(2) Speaker (8Ω Impedance)

7. GND and HI-POT Test7.1. GND & HI-POT auto-check preparation

(1) Check the POWER CABLE and SIGNAL CABE insertion condition

7.2. GND & HI-POT auto-check(1) Pallet moves in the station. (POWER CORD / AV CORD is

tightly inserted)(2) Connect the AV JACK Tester.(3) Controller (GWS103-4) on.(4) GND Test (Auto) - If Test is failed, Buzzer operates.- If Test is passed, execute next process (Hi-pot test). (Remove A/V CORD from A/V JACK BOX) (5) HI-POT test (Auto) - If Test is failed, Buzzer operates. - If Test is passed, GOOD Lamp on and move to next process

automatically.

7.3. Checkpoint(1) Test voltage- GND: 1.5KV/min at 100mA- SIGNAL: 3KV/min at 100mA(2) TEST time: 1 second(3) TEST POINT- GND Test = POWER CORD GND and SIGNAL CABLE GND.- Hi-pot Test = POWER CORD GND and LIVE & NEUTRAL.(4) LEAKAGE CURRENT: At 0.5mArms

8. USB S/W Download (optional, Service only)

(1) Put the USB Stick to the USB socket (2) Automatically detecting update file in USB Stick - If your downloaded program version in USB Stick is lower

than that of TV set, it didn’t work. Otherwise USB data is automatically detected.

(3) Show the message “Copying files from memory”

(5) Updating Completed, The TV will restart automatically(6) If your TV is turned on, check your updated version and

Tool option. * If downloading version is more high than your TV have, TV

can lost all channel data. In this case, you have to channel recover. If all channel data is cleared, you didn’t have a DTV/ATV test on production line.

* After downloading, TOOL OPTION setting is needed again.(1) Push "IN-START" key in service remote controller.(2) Select "Tool Option 1" and Push “OK” button.(3) Punch in the number. (Each model has their number.)

(4) Updating is staring.

- 17 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.Only for training and service purposes

9. Optional adjustments9.1. Manual White balance Adjustment9.1.1. Adj. condition and cautionary items

(1) Lighting condition in surrounding area surrounding lighting should be lower 10 lux. Try to isolate adj. area into dark surrounding.

(2) Probe location: Color Analyzer (CA-210) probe should be within 10cm and perpendicular of the module surface

(80°~ 100°)(3) Aging time i) After Aging Start, Keep the Power ON status during 5

Minutes. ii) In case of LCD, Back-light on should be checked using no

signal or Full-white pattern.

9.1.2. Equipment(1) Color Analyzer: CA-210 (NCG: CH 9 / WCG: CH12 / LED:

CH14)(2) Adj. Computer (During auto adj., RS-232C protocol is

needed)(3) Adjust Remocon(4) Video Signal Generator MSPG-925F 720p/216-Gray

(Model: 217, Pattern: 78)

9.1.3. Adjustment(1) Set TV in Adj. mode using POWER ON(2) Zero Calibrate the probe of Color Analyzer, then place it on

the center of LCD module within 10cm of the surface.(3) Press ADJ key -> EZ adjust using adj. R/C -> 6. White-

Balance then press the cursor to the right (KEY). When KEY() is pressed 216 Gray internal pattern will be displayed.

(4) One of R Gain / G Gain / B Gain should be fixed at 192, and the rest will be lowered to meet the desired value.

(5) Adj. is performed in COOL, MEDIUM, WARM 3 modes of color temperature.

If internal pattern is not available, use RF input. In EZ Adj.

menu 6.White Balance, you can select one of 2 Test-pattern: ON, OFF. Default is inner(ON). By selecting OFF, you can adjust using RF signal in 216 Gray pattern.

- 18 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.Only for training and service purposes

BLOCK DIAGRAM

Aud

io A

MP

(NTP

7513

)

MTK

A2

CI S

lot

P_TS

P_TS

T/C

Dem

odIF

(+/-)

USB

1

OPT

IC

LAN

DD

R3

1600

X 1

6 (5

12M

B X

2EA

)

HD

MI1

HD

MI2

HD

MI3

Ana

log

Dem

odSY

STEM

EEP

RO

M

(256

Kb)

HD

MI

MU

X

Air/

Cab

leTU

NER

(T/C

/A)

LNB

USB

2U

SB3

41P

51P

eMM

C

(4G

B)

Sub

Mic

om

(REN

ESA

S R

5F10

00G

)

DD

R3

160

0 X

16(2

56M

B X

1EA

)

P_TS

50P

50P

X_TA

L27

MH

zT/

C/S

2 W

ithou

t ATV

LVD

S D

iagr

am

AB

HD

CP

EEPR

OM

(1

6Kb)

X_TA

L32

.768

KH

z

I2S

Out

I2C

1EPI

I2C

2

LVD

S

USBP_

TSI2

C 5

I2C

1

H/P

AV/

CO

MP

Tune

r : I2

C 6

DVB

-S :

I2C

4

OC

P 2.

5AO

CP

1A

(HD

D)

MH

L 1A

SIL1

392

800M

Hz

MH

L : I

2C 4

MH

L 사용시

R E A R

S I D ES I D E

R E A R (H)

AM

PTI

CVB

S/YP

bPr

SPD

IF O

UT

ETH

ERN

ET

I2C

3

LOC

AL

DIM

MIN

G

BLU

TOO

TH

IR /

NFC

PM

ICLE

VEL

SHIF

TER

WIF

I

KEY

LOG

O L

IGH

T

SUB

ASS

Y

I2C

1

UA

RT IR

KEY

USB

_WIF

I

800M

Hz

- 19 - LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.Only for training and service purposes

EXPLODED VIEW

Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in the Schematic Diagram and EXPLODED VIEW. It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent X-RADIATION, Shock, Fire, or other Hazards. Do not modify the original design without permission of manufacturer.

IMPORTANT SAFETY NOTICE

410

420

900

200

400

540

521

530

820

120

310

121

LV1

A2

A10

Set

+ S

tand

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATESSPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.FIRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFACTURES SPECIFIED PARTS BE USED FORTHE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

L505BLM18PG121SN1D

AVDD_33SB

LAN_JACK_POWER

Q500MMBT3904(NXP)

E

B

C

C5110.1uF

C51810uF

L503BLM18PG121SN1D

OPT

VDD3V3

+3.5V_ST_WAKE

C5310.1uF16V

C51710uF

C5270.1uF

OPT+1.2V_MTK_CORE

WOL_CTL

C5070.1uF

+3.3V_NORMAL

POWER_ON/OFF1

C5230.1uF

C51410uF

+1.5V_DDR

VDD3V3

TP500

L504BLM18PG121SN1D

C50310uF

C5350.1uF

OPT

+1.5V_DDRC5410.1uF16V

OPT

3.3V_EMMC

+1.2V_MTK_CORE

+1.2V_MTK_CORE

+3.5V_ST_WAKE

C50510uF

+1.2V_MTK_CORE

VDD3V3

TP501

R50010K

+3.5V_ST

C51310uF

OPT

+1.2V_MTK_AVDD

C5082.2uF

+3.3V_NORMAL

C5040.1uF

OPT

C5390.1uF

OPT

C5320.1uF

C5200.1uF

C5090.1uF

L501BLM18PG121SN1D

C5060.1uF

L502BLM18PG121SN1D

OPT+1.2V_MTK_CORE

VDD3V3

Q501PMV48XP

G

DS

ZD500

5V

OPT

C5004.7uF10VOPT

C5014.7uF10V

R502

10K

R501

1.8K

C5020.1uF16V

OPT

IC500

AP2121N-3.3TRE1

1

GND

2 VOUT3VIN

+3.5V_ST_WAKE

C5100.1uF16V

AVDD_33SB

C5121uF10V

TP502

TP503

IC105LGE2122[A2_M13]

VCCK_1L11

VCCK_2N12

VCCK_3P12

VCCK_4AG5

VCCK_5AH5

VCCK_6AJ5

VCCK_7AK5

VCCK_8AL5

VCCK_9AM5

VCCK_10AN5

VCCK_11AK6

VCCK_12AL6

VCCK_13AM6

VCCK_14AN6

VCCK_15M11

VCCK_16N11

VCCK_17P11

VCCK_18R11

VCCK_19M12

VCCK_20R12

VCCK_21L13

VCCK_22L14

VCCK_23L15

VCCK_24L17

VCCK_25L18

VCCK_26L19

VCCK_27T11

VCCK_28U11

VCCK_29V11

VCCK_30W11

VCCK_31Y11

VCCK_32AA11

VCCK_33AB11

VCCK_34AC11

VCCK_35R23

VCCK_36L12

VCCK_37W12

VCCK_38V23

VCCK_39Y12

VCCK_40AF6

VCCK_41AG6

VCCK_42AH6

VCCK_43AJ6

VCCK_44AE7

VCCK_45AF7

VCCK_46AG7

VCCK_47AD8

VCCK_48AE8

VCCK_49AF8

VCCK_50AE9

VCCK_51AC10

VCCK_52AD10

VCCK_53AD11

VCCK_54AE10

VCCK_55AF9

VCCK_56AG8

VCCK_57AH7

VCCK_58AJ7

VCCK_59AK7

VCCK_60AL7

VCCK_61AM7

VCCK_62AN7

VCCK_63L16

VCCK_64V12

VCCK_65U12

VCCK_66T12

VCCK_67AD13

VCCK_68AD17

VCCK_69AD14

VCCK_70AB12

VCCK_71AA12

VCCK_72AC12

VCC3IO_CT9

VCC3IO_B_1Y10

VCC3IO_B_2AA10

VCC3IO_A_1D22

VCC3IO_A_2E22

DVSS_1AC18

DVSS_2AB21

DVSS_3AB14

DVSS_4N13

DVSS_5P13

DVSS_6R13

DVSS_7T13

DVSS_8U13

DVSS_9V13

DVSS_10W13

DVSS_11Y13

DVSS_12P18

DVSS_13N14

DVSS_14P14

DVSS_15R14

DVSS_16T14

DVSS_17U14

DVSS_18V14

DVSS_19W14

DVSS_20Y14

DVSS_21R18

DVSS_22N15

DVSS_23P15

DVSS_24R15

DVSS_25T15

DVSS_26U15

DVSS_27V15

DVSS_28W15

DVSS_29Y15

DVSS_30AA15

DVSS_31AB15

DVSS_32T18

DVSS_33R16

DVSS_34T16

DVSS_35U16

DVSS_36V16

DVSS_37W16

DVSS_38Y16

DVSS_39AA16

DVSS_40AB16

DVSS_41R17

DVSS_42T17

DVSS_43U17

DVSS_44V17

DVSS_45Y17

DVSS_46N16

DVSS_47V18

DVSS_48Y18

DVSS_49P16

DVSS_50V19

DVSS_51Y19

DVSS_52W17

DVSS_53AA17

DVSS_54AB17

DVSS_55N19

DVSS_56AC14

DVSS_57C13

DVSS_58K24

DVSS_59K25

DVSS_60L24

DVSS_61M17

DVSS_62M18

DVSS_63M19

DVSS_64P17

DVSS_65P19

DVSS_66N18

DVSS_67U20

DVSS_68V20

DVSS_69W20

DVSS_70Y20

DVSS_71AA20

DVSS_72R19

DVSS_73T19

DVSS_74M20

DVSS_75N20

DVSS_76U21

DVSS_77V21

DVSS_78W21

DVSS_79Y21

DVSS_80AA21

DVSS_81P20

DVSS_82R20

DVSS_83T20

DVSS_84U22

DVSS_85V22

DVSS_86W22

DVSS_87Y22

DVSS_88AA22

DVSS_89N21

DVSS_90P21

DVSS_91R21

DVSS_92T21

DVSS_93M22

DVSS_94N22

DVSS_95P22

DVSS_96R22

DVSS_97T22

DVSS_98M21

DVSS_99AC17

DVSS_100AA19

DVSS_101M13

DVSS_102M14

DVSS_103M15

DVSS_104AA13

DVSS_105AB13

DVSS_106AA14

DVSS_107AB19

DVSS_108D6

DVSS_109W19

DVSS_110U19

DVSS_111N17

DVSS_112L3

DVSS_113AB18

DVSS_114AA18

DVSS_115W18

DVSS_116U18

DVSS_117D16

DVSS_118AC13

DVSS_119M16

DVSS_120AC20

DVSS_121AC22

DVSS_122AD20

DVSS_123Y23

DVSS_124AA23

DVSS_125AB23

DVSS_126V24

DVSS_127W23

10

2011.12.09MID_MAIN_3

DECAP FOR SOC (HIDDEN - UCC) DECAP FOR SOC Rework (BOTTOM)

60mA

5600mA

Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATESSPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.FIRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFACTURES SPECIFIED PARTS BE USED FORTHE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

BRA[2]

BRDQ[2]

ARDQ[14]

ARDQ[22]

BRDQ[0]

ARDQ[24]

ARDQ[11]

ARDQ[11]

ARA[12]

BRDQ[10]

ARDQ[5]

ARA[11]

BRDQ[1]

BRDQ[15]

ARDQ[24]

BRDQ[5]

ARDQ[29]

ARDQ[26]

BRDQ[13]

ARDQ[6]

BRA[8]

BRA[3]

BRDQ[10]

ARDQ[10]

BRA[0]

ARDQ[31]

BRDQ[2]

ARDQ[8]

ARA[13]

BRA[6]

ARDQ[2]

ARDQ[12]

BRA[9]

BRA[1]

BRDQ[3]

BRDQ[13]

ARDQ[3]ARDQ[6]

ARDQ[0]

BRDQ[4]

ARDQ[3]

BRA[4]

BRDQ[12]

ARDQ[1]

ARDQ[28]

BRDQ[8]

BRA[11]

BRA[13]

BRA[6]

ARDQ[16]

ARA[9]

ARA[8]

ARA[2]

BRDQ[9]

BRA[5]

ARDQ[28]

ARA[10]

BRDQ[7]

ARA[13]

ARDQ[26]

ARDQ[9]

ARA[14]

BRA[11]

ARA[6]

ARDQ[27]

BRDQ[1]

ARDQ[4]

BRA[5]

ARA[11]

ARDQ[13]

ARA[3]

ARDQ[31]

BRA[13]

BRDQ[6]

ARDQ[23]

BRDQ[9]

ARDQ[18]

ARA[4]

ARA[6]

ARA[3]

BRA[4]

BRA[7]

ARA[9]

ARA[3]

ARA[7]

ARDQ[9]

ARDQ[7]

ARDQ[1]

ARDQ[15]

ARA[10]

BRDQ[6]

ARDQ[16]

ARA[8]

BRDQ[15]

ARDQ[30]

ARA[0]

BRDQ[12]

ARDQ[18]

BRA[10]

BRDQ[14]

ARA[13]

ARDQ[2]

ARDQ[27]

ARDQ[21]

ARDQ[7]

BRA[15]

ARA[11]

ARA[5]

ARA[5]

BRA[7]

ARDQ[22]

ARA[14]

BRA[1]

ARDQ[29]

ARA[9]

ARDQ[17]

ARA[1]

BRA[12]

ARA[4]

ARA[10]

ARDQ[8]

ARA[0]

ARDQ[19]

ARDQ[20]

ARDQ[30]

ARDQ[10]

ARA[8]

BRDQ[8]

ARDQ[20]

BRA[9]

ARA[5]

ARDQ[15]

ARA[14]

ARA[12]

ARA[7]

BRDQ[5]

ARDQ[12]

ARA[4]

BRDQ[7]

ARDQ[5]

ARDQ[23]

ARDQ[13]

BRA[10]

BRA[8]

BRA[2]

ARDQ[19]

ARA[2]

ARA[12]

BRA[3]

ARDQ[25]

BRDQ[14]

ARA[1]

ARDQ[25]

ARDQ[21]

ARDQ[14]

ARDQ[17]

BRA[0]

BRDQ[0]

ARA[2]

ARDQ[0]

BRDQ[4]

BRDQ[3]

BRA[14]

BRDQ[11]

ARA[7]

ARA[0]

ARA[1]

ARDQ[4]

BRDQ[11]

BRA[12]

ARA[6]

/ARDQS3

R7311K1%

ARDQM2

B_RVREF6

ARDQ[24-31]

C7530.1uF

/ARDQS2

R7041K1%

R7031K1%

BRBA1

C7090.1uF

/BRCLK0

BRDQ[8-15]

ARCLK1

ARDQS0

+1.5V_DDR

+1.5V_DDR

/ARDQS2

C7350.1uF

C7550.1uF

TP700

R7061K1%

C7230.1uF

C7180.1uF

R7191K1%

/ARCAS

/ARDQS1

BRDQM1

/ARWE

C7460.1uF

+1.5V_DDR

BRODT

R7162401%

BRCLK0BRBA0

R7271K1%

BRREST

A_RVREF3

C7140.1uF

C7540.1uF

ARDQM1

VDD3V3+1.5V_DDR

C70810uF10V

BRDQS0

ARDQ[16-23]

BRCKE

C7280.1uF

ARDQM3

R7051K1%

/BRDQS1

R7141005%

ARBA2

ARODT

ARDQ[8-15]

/BRWE

A_RVREF1

+1.5V_DDR

C70110uF10V

/ARDQS0

ARDQS0

A_RVREF4

ARDQS1

/BRRAS

/ARCAS

R7121005%

BRDQS1

BRDQ[0-7]

ARDQM1

ARDQ[24-31]

C7470.1uF

+1.5V_DDR

+1.5V_DDR

BRA[0-15]

/BRDQS1

/ARCLK0

ARBA1

ARDQ[0-7]

ARDQS3

ARCLK0

/ARWE

C70710uF10V

C7220.1uF

RVREF_A

+1.5V_DDR

/ARCLK1

R711 2401%

BRODT

R7131005%

BRBA0

R7201K1%

ARDQ[8-15]

ARDQ[0-7]R7301K1%

C7150.1uF

A_RVREF2

ARDQS2

C7130.1uF

C7340.1uF

+1.5V_DDR

ARBA0

C7330.1uF

BRDQS1

C7110.1uF

/ARCS

BRA[0-14]

/BRCS

ARCLK0

ARBA1

RVREF_C

C7190.1uF

ARA[0-14]

BRCKE

R7261K1%

ARDQS3

C7420.1uF

ARODT

ARDQM3

C7250.1uF

BRDQM0

+1.5V_DDR

C7510.1uF

+1.5V_DDR

BRDQ[8-15]

ARBA0

RVREF_A

R7071K1%

ARBA2C7200.1uF

ARDQS2

BRCLK0

C7120.1uF

/ARDQS1

/ARCLK0

+1.5V_DDR

/ARCAS

/BRDQS0

/ARRAS

BRBA2

C70410uF10V

BRREST

R710 240

1%

ARODT

B_RVREF5

ARDQM2

A_RVREF1

ARBA1

/ARRAS

BRA[15]

+1.5V_DDR

RVREF_C

ARCLK1

R7211K1%

/BRWE

R7081K1%

R7181K1%

B_RVREF5

+1.5V_DDR

+1.5V_DDR

/ARCSX

C7270.1uF

1uFC703

ARCKE

/ARCSX

ARCKE

/ARCS

/BRCAS

C7100.1uF

1uFC706

BRDQS0

C7260.1uF

/ARWE

C7500.1uF

C7410.1uF

/ARDQS0

/BRDQS0

ARCKE

C7360.1uF

/BRRAS

ARBA0

ARREST

/ARDQS3

1uFC702

R7091K1%

C7160.1uF

/BRCAS

BRDQM0

1uFC705

ARDQM0

BRDQM1

ARDQ[16-23]

BRDQ[0-7]

ARA[0-14]

BRBA2

C7450.1uF

+1.5V_DDR

ARA[0-14]

/ARRAS

+1.5V_DDR

A_RVREF2

A_RVREF3

ARREST

BRBA1

C7170.1uF

TP701

ARDQS1

A_RVREF4

/BRCLK0

/ARCLK1

ARREST

R7021K1%

C7000.1uF

B_RVREF6

/BRCS

ARDQM0

BRA[14]

ARBA2

K4B2G1646E-BCK0 IC702-*1

DDR_256MB_SS

A0N3

A1P7

A2P3

A3N2

A4P8

A5P2

A6R8

A7R2

A8T8

A9R3

A10/APL7

A11R7

A12/BCN7

A13T3

NC_5M7

BA0M2

BA1N8

BA2M3

CKJ7

CKK7

CKEK9

CSL2

ODTK1

RASJ3

CASK3

WEL3

RESETT2

DQSLF3

DQSLG3

DQSUC7

DQSUB7

DMLE7

DMUD3

DQL0E3

DQL1F7

DQL2F2

DQL3F8

DQL4H3

DQL5H8

DQL6G2

DQL7H7

DQU0D7

DQU1C3

DQU2C8

DQU3C2

DQU4A7

DQU5A2

DQU6B8

DQU7A3

VREFCAM8

VREFDQH1

ZQL8

VDD_1B2

VDD_2D9

VDD_3G7

VDD_4K2

VDD_5K8

VDD_6N1

VDD_7N9

VDD_8R1

VDD_9R9

VDDQ_1A1

VDDQ_2A8

VDDQ_3C1

VDDQ_4C9

VDDQ_5D2

VDDQ_6E9

VDDQ_7F1

VDDQ_8H2

VDDQ_9H9

NC_1J1

NC_2J9

NC_3L1

NC_4L9

NC_6T7

VSS_1A9

VSS_2B3

VSS_3E1

VSS_4G8

VSS_5J2

VSS_6J8

VSS_7M1

VSS_8M9

VSS_9P1

VSS_10P9

VSS_11T1

VSS_12T9

VSSQ_1B1

VSSQ_2B9

VSSQ_3D1

VSSQ_4D8

VSSQ_5E2

VSSQ_6E8

VSSQ_7F9

VSSQ_8G1

VSSQ_9G9

K4B4G1646B-HCK0IC701

DDR_512MB_SS

A0N3

A1P7

A2P3

A3N2

A4P8

A5P2

A6R8

A7R2

A8T8

A9R3

A10/APL7

A11R7

A12/BCN7

A13T3

A15M7

BA0M2

BA1N8

BA2M3

CKJ7

CKK7

CKEK9

CSL2

ODTK1

RASJ3

CASK3

WEL3

RESETT2

DQSLF3

DQSLG3

DQSUC7

DQSUB7

DMLE7

DMUD3

DQL0E3

DQL1F7

DQL2F2

DQL3F8

DQL4H3

DQL5H8

DQL6G2

DQL7H7

DQU0D7

DQU1C3

DQU2C8

DQU3C2

DQU4A7

DQU5A2

DQU6B8

DQU7A3

VREFCAM8

VREFDQH1

ZQL8

VDD_1B2

VDD_2D9

VDD_3G7

VDD_4K2

VDD_5K8

VDD_6N1

VDD_7N9

VDD_8R1

VDD_9R9

VDDQ_1A1

VDDQ_2A8

VDDQ_3C1

VDDQ_4C9

VDDQ_5D2

VDDQ_6E9

VDDQ_7F1

VDDQ_8H2

VDDQ_9H9

NC_1J1

NC_2J9

NC_3L1

NC_4L9

A14T7

VSS_1A9

VSS_2B3

VSS_3E1

VSS_4G8

VSS_5J2

VSS_6J8

VSS_7M1

VSS_8M9

VSS_9P1

VSS_10P9

VSS_11T1

VSS_12T9

VSSQ_1B1

VSSQ_2B9

VSSQ_3D1

VSSQ_4D8

VSSQ_5E2

VSSQ_6E8

VSSQ_7F9

VSSQ_8G1

VSSQ_9G9

K4B4G1646B-HCK0IC703

DDR_512MB_SS

A0N3

A1P7

A2P3

A3N2

A4P8

A5P2

A6R8

A7R2

A8T8

A9R3

A10/APL7

A11R7

A12/BCN7

A13T3

A15M7

BA0M2

BA1N8

BA2M3

CKJ7

CKK7

CKEK9

CSL2

ODTK1

RASJ3

CASK3

WEL3

RESETT2

DQSLF3

DQSLG3

DQSUC7

DQSUB7

DMLE7

DMUD3

DQL0E3

DQL1F7

DQL2F2

DQL3F8

DQL4H3

DQL5H8

DQL6G2

DQL7H7

DQU0D7

DQU1C3

DQU2C8

DQU3C2

DQU4A7

DQU5A2

DQU6B8

DQU7A3

VREFCAM8

VREFDQH1

ZQL8

VDD_1B2

VDD_2D9

VDD_3G7

VDD_4K2

VDD_5K8

VDD_6N1

VDD_7N9

VDD_8R1

VDD_9R9

VDDQ_1A1

VDDQ_2A8

VDDQ_3C1

VDDQ_4C9

VDDQ_5D2

VDDQ_6E9

VDDQ_7F1

VDDQ_8H2

VDDQ_9H9

NC_1J1

NC_2J9

NC_3L1

NC_4L9

A14T7

VSS_1A9

VSS_2B3

VSS_3E1

VSS_4G8

VSS_5J2

VSS_6J8

VSS_7M1

VSS_8M9

VSS_9P1

VSS_10P9

VSS_11T1

VSS_12T9

VSSQ_1B1

VSSQ_2B9

VSSQ_3D1

VSSQ_4D8

VSSQ_5E2

VSSQ_6E8

VSSQ_7F9

VSSQ_8G1

VSSQ_9G9

H5TQ4G63AFR-PBC IC703-*1

DDR_512MB_Hynix

A0N3

A1P7

A2P3

A3N2

A4P8

A5P2

A6R8

A7R2

A8T8

A9R3

A10/APL7

A11R7

A12/BCN7

A13T3

A15M7

BA0M2

BA1N8

BA2M3

CKJ7

CKK7

CKEK9

CSL2

ODTK1

RASJ3

CASK3

WEL3

RESETT2

DQSLF3

DQSLG3

DQSUC7

DQSUB7

DMLE7

DMUD3

DQL0E3

DQL1F7

DQL2F2

DQL3F8

DQL4H3

DQL5H8

DQL6G2

DQL7H7

DQU0D7

DQU1C3

DQU2C8

DQU3C2

DQU4A7

DQU5A2

DQU6B8

DQU7A3

VREFCAM8

VREFDQH1

ZQL8

VDD_1B2

VDD_2D9

VDD_3G7

VDD_4K2

VDD_5K8

VDD_6N1

VDD_7N9

VDD_8R1

VDD_9R9

VDDQ_1A1

VDDQ_2A8

VDDQ_3C1

VDDQ_4C9

VDDQ_5D2

VDDQ_6E9

VDDQ_7F1

VDDQ_8H2

VDDQ_9H9

NC_1J1

NC_2J9

NC_3L1

NC_4L9

A14T7

VSS_1A9

VSS_2B3

VSS_3E1

VSS_4G8

VSS_5J2

VSS_6J8

VSS_7M1

VSS_8M9

VSS_9P1

VSS_10P9

VSS_11T1

VSS_12T9

VSSQ_1B1

VSSQ_2B9

VSSQ_3D1

VSSQ_4D8

VSSQ_5E2

VSSQ_6E8

VSSQ_7F9

VSSQ_8G1

VSSQ_9G9

H5TQ4G63AFR-PBC IC701-*1

DDR_512MB_Hynix

A0N3

A1P7

A2P3

A3N2

A4P8

A5P2

A6R8

A7R2

A8T8

A9R3

A10/APL7

A11R7

A12/BCN7

A13T3

A15M7

BA0M2

BA1N8

BA2M3

CKJ7

CKK7

CKEK9

CSL2

ODTK1

RASJ3

CASK3

WEL3

RESETT2

DQSLF3

DQSLG3

DQSUC7

DQSUB7

DMLE7

DMUD3

DQL0E3

DQL1F7

DQL2F2

DQL3F8

DQL4H3

DQL5H8

DQL6G2

DQL7H7

DQU0D7

DQU1C3

DQU2C8

DQU3C2

DQU4A7

DQU5A2

DQU6B8

DQU7A3

VREFCAM8

VREFDQH1

ZQL8

VDD_1B2

VDD_2D9

VDD_3G7

VDD_4K2

VDD_5K8

VDD_6N1

VDD_7N9

VDD_8R1

VDD_9R9

VDDQ_1A1

VDDQ_2A8

VDDQ_3C1

VDDQ_4C9

VDDQ_5D2

VDDQ_6E9

VDDQ_7F1

VDDQ_8H2

VDDQ_9H9

NC_1J1

NC_2J9

NC_3L1

NC_4L9

A14T7

VSS_1A9

VSS_2B3

VSS_3E1

VSS_4G8

VSS_5J2

VSS_6J8

VSS_7M1

VSS_8M9

VSS_9P1

VSS_10P9

VSS_11T1

VSS_12T9

VSSQ_1B1

VSSQ_2B9

VSSQ_3D1

VSSQ_4D8

VSSQ_5E2

VSSQ_6E8

VSSQ_7F9

VSSQ_8G1

VSSQ_9G9

MT41K128M16JT-125:KIC701-*3

DDR_256MB_MICRON

A0N3

A1P7

A2P3

A3N2

A4P8

A5P2

A6R8

A7R2

A8T8

A9R3

A10/APL7

A11R7

A12/BCN7

A13T3

NC_5M7

BA0M2

BA1N8

BA2M3

CKJ7

CKK7

CKEK9

CSL2

ODTK1

RASJ3

CASK3

WEL3

RESETT2

DQSLF3

DQSLG3

DQSUC7

DQSUB7

DMLE7

DMUD3

DQ0E3

DQ1F7

DQ2F2

DQ3F8

DQ4H3

DQ5H8

DQ6G2

DQ7H7

DQ8D7

DQ9C3

DQ10C8

DQ11C2

DQ12A7

DQ13A2

DQ14B8

DQ15A3

VREFCAM8

VREFDQH1

ZQL8

VDD_1B2

VDD_2D9

VDD_3G7

VDD_4K2

VDD_5K8

VDD_6N1

VDD_7N9

VDD_8R1

VDD_9R9

VDDQ_1A1

VDDQ_2A8

VDDQ_3C1

VDDQ_4C9

VDDQ_5D2

VDDQ_6E9

VDDQ_7F1

VDDQ_8H2

VDDQ_9H9

NC_1J1

NC_2J9

NC_3L1

NC_4L9

NC_6T7

VSS_1A9

VSS_2B3

VSS_3E1

VSS_4G8

VSS_5J2

VSS_6J8

VSS_7M1

VSS_8M9

VSS_9P1

VSS_10P9

VSS_11T1

VSS_12T9

VSSQ_1B1

VSSQ_2B9

VSSQ_3D1

VSSQ_4D8

VSSQ_5E2

VSSQ_6E8

VSSQ_7F9

VSSQ_8G1

VSSQ_9G9

MT41K128M16JT-125:KIC703-*3

DDR_256MB_MICRON

A0N3

A1P7

A2P3

A3N2

A4P8

A5P2

A6R8

A7R2

A8T8

A9R3

A10/APL7

A11R7

A12/BCN7

A13T3

NC_5M7

BA0M2

BA1N8

BA2M3

CKJ7

CKK7

CKEK9

CSL2

ODTK1

RASJ3

CASK3

WEL3

RESETT2

DQSLF3

DQSLG3

DQSUC7

DQSUB7

DMLE7

DMUD3

DQ0E3

DQ1F7

DQ2F2

DQ3F8

DQ4H3

DQ5H8

DQ6G2

DQ7H7

DQ8D7

DQ9C3

DQ10C8

DQ11C2

DQ12A7

DQ13A2

DQ14B8

DQ15A3

VREFCAM8

VREFDQH1

ZQL8

VDD_1B2

VDD_2D9

VDD_3G7

VDD_4K2

VDD_5K8

VDD_6N1

VDD_7N9

VDD_8R1

VDD_9R9

VDDQ_1A1

VDDQ_2A8

VDDQ_3C1

VDDQ_4C9

VDDQ_5D2

VDDQ_6E9

VDDQ_7F1

VDDQ_8H2

VDDQ_9H9

NC_1J1

NC_2J9

NC_3L1

NC_4L9

NC_6T7

VSS_1A9

VSS_2B3

VSS_3E1

VSS_4G8

VSS_5J2

VSS_6J8

VSS_7M1

VSS_8M9

VSS_9P1

VSS_10P9

VSS_11T1

VSS_12T9

VSSQ_1B1

VSSQ_2B9

VSSQ_3D1

VSSQ_4D8

VSSQ_5E2

VSSQ_6E8

VSSQ_7F9

VSSQ_8G1

VSSQ_9G9

MT41K256M16HA-125:EIC701-*2

DDR_512MB_MICRON

A0N3

A1P7

A2P3

A3N2

A4P8

A5P2

A6R8

A7R2

A8T8

A9R3

A10/APL7

A11R7

A12/BCN7

A13T3

NC_5M7

BA0M2

BA1N8

BA2M3

CKJ7

CKK7

CKEK9

CSL2

ODTK1

RASJ3

CASK3

WEL3

RESETT2

DQSLF3

DQSLG3

DQSUC7

DQSUB7

DMLE7

DMUD3

DQ0E3

DQ1F7

DQ2F2

DQ3F8

DQ4H3

DQ5H8

DQ6G2

DQ7H7

DQ8D7

DQ9C3

DQ10C8

DQ11C2

DQ12A7

DQ13A2

DQ14B8

DQ15A3

VREFCAM8

VREFDQH1

ZQL8

VDD_1B2

VDD_2D9

VDD_3G7

VDD_4K2

VDD_5K8

VDD_6N1

VDD_7N9

VDD_8R1

VDD_9R9

VDDQ_1A1

VDDQ_2A8

VDDQ_3C1

VDDQ_4C9

VDDQ_5D2

VDDQ_6E9

VDDQ_7F1

VDDQ_8H2

VDDQ_9H9

NC_1J1

NC_2J9

NC_3L1

NC_4L9

A14T7

VSS_1A9

VSS_2B3

VSS_3E1

VSS_4G8

VSS_5J2

VSS_6J8

VSS_7M1

VSS_8M9

VSS_9P1

VSS_10P9

VSS_11T1

VSS_12T9

VSSQ_1B1

VSSQ_2B9

VSSQ_3D1

VSSQ_4D8

VSSQ_5E2

VSSQ_6E8

VSSQ_7F9

VSSQ_8G1

VSSQ_9G9

MT41K256M16HA-125:EIC703-*2

DDR_512MB_MICRON

A0N3

A1P7

A2P3

A3N2

A4P8

A5P2

A6R8

A7R2

A8T8

A9R3

A10/APL7

A11R7

A12/BCN7

A13T3

NC_5M7

BA0M2

BA1N8

BA2M3

CKJ7

CKK7

CKEK9

CSL2

ODTK1

RASJ3

CASK3

WEL3

RESETT2

DQSLF3

DQSLG3

DQSUC7

DQSUB7

DMLE7

DMUD3

DQ0E3

DQ1F7

DQ2F2

DQ3F8

DQ4H3

DQ5H8

DQ6G2

DQ7H7

DQ8D7

DQ9C3

DQ10C8

DQ11C2

DQ12A7

DQ13A2

DQ14B8

DQ15A3

VREFCAM8

VREFDQH1

ZQL8

VDD_1B2

VDD_2D9

VDD_3G7

VDD_4K2

VDD_5K8

VDD_6N1

VDD_7N9

VDD_8R1

VDD_9R9

VDDQ_1A1

VDDQ_2A8

VDDQ_3C1

VDDQ_4C9

VDDQ_5D2

VDDQ_6E9

VDDQ_7F1

VDDQ_8H2

VDDQ_9H9

NC_1J1

NC_2J9

NC_3L1

NC_4L9

A14T7

VSS_1A9

VSS_2B3

VSS_3E1

VSS_4G8

VSS_5J2

VSS_6J8

VSS_7M1

VSS_8M9

VSS_9P1

VSS_10P9

VSS_11T1

VSS_12T9

VSSQ_1B1

VSSQ_2B9

VSSQ_3D1

VSSQ_4D8

VSSQ_5E2

VSSQ_6E8

VSSQ_7F9

VSSQ_8G1

VSSQ_9G9

MT41K128M16JT-125:K IC702

DDR_256MB_MICRON

A0N3

A1P7

A2P3

A3N2

A4P8

A5P2

A6R8

A7R2

A8T8

A9R3

A10/APL7

A11R7

A12/BCN7

A13T3

NC_5M7

BA0M2

BA1N8

BA2M3

CKJ7

CKK7

CKEK9

CSL2

ODTK1

RASJ3

CASK3

WEL3

RESETT2

DQSLF3

DQSLG3

DQSUC7

DQSUB7

DMLE7

DMUD3

DQ0E3

DQ1F7

DQ2F2

DQ3F8

DQ4H3

DQ5H8

DQ6G2

DQ7H7

DQ8D7

DQ9C3

DQ10C8

DQ11C2

DQ12A7

DQ13A2

DQ14B8

DQ15A3

VREFCAM8

VREFDQH1

ZQL8

VDD_1B2

VDD_2D9

VDD_3G7

VDD_4K2

VDD_5K8

VDD_6N1

VDD_7N9

VDD_8R1

VDD_9R9

VDDQ_1A1

VDDQ_2A8

VDDQ_3C1

VDDQ_4C9

VDDQ_5D2

VDDQ_6E9

VDDQ_7F1

VDDQ_8H2

VDDQ_9H9

NC_1J1

NC_2J9

NC_3L1

NC_4L9

NC_6T7

VSS_1A9

VSS_2B3

VSS_3E1

VSS_4G8

VSS_5J2

VSS_6J8

VSS_7M1

VSS_8M9

VSS_9P1

VSS_10P9

VSS_11T1

VSS_12T9

VSSQ_1B1

VSSQ_2B9

VSSQ_3D1

VSSQ_4D8

VSSQ_5E2

VSSQ_6E8

VSSQ_7F9

VSSQ_8G1

VSSQ_9G9

H5TQ2G63DFR-PBC IC702-*2

DDR_256MB_HYNIX_NC4.0

A0N3

A1P7

A2P3

A3N2

A4P8

A5P2

A6R8

A7R2

A8T8

A9R3

A10/APL7

A11R7

A12/BCN7

A13T3

NC_5M7

BA0M2

BA1N8

BA2M3

CKJ7

CKK7

CKEK9

CSL2

ODTK1

RASJ3

CASK3

WEL3

RESETT2

DQSLF3

DQSLG3

DQSUC7

DQSUB7

DMLE7

DMUD3

DQL0E3

DQL1F7

DQL2F2

DQL3F8

DQL4H3

DQL5H8

DQL6G2

DQL7H7

DQU0D7

DQU1C3

DQU2C8

DQU3C2

DQU4A7

DQU5A2

DQU6B8

DQU7A3

VREFCAM8

VREFDQH1

ZQL8

VDD_1B2

VDD_2D9

VDD_3G7

VDD_4K2

VDD_5K8

VDD_6N1

VDD_7N9

VDD_8R1

VDD_9R9

VDDQ_1A1

VDDQ_2A8

VDDQ_3C1

VDDQ_4C9

VDDQ_5D2

VDDQ_6E9

VDDQ_7F1

VDDQ_8H2

VDDQ_9H9

NC_1J1

NC_2J9

NC_3L1

NC_4L9

NC_6T7

VSS_1A9

VSS_2B3

VSS_3E1

VSS_4G8

VSS_5J2

VSS_6J8

VSS_7M1

VSS_8M9

VSS_9P1

VSS_10P9

VSS_11T1

VSS_12T9

VSSQ_1B1

VSSQ_2B9

VSSQ_3D1

VSSQ_4D8

VSSQ_5E2

VSSQ_6E8

VSSQ_7F9

VSSQ_8G1

VSSQ_9G9

IC105LGE2122[A2_M13]

DDRV_1R1

DDRV_2R2

DDRV_3R3

DDRV_4R4

DDRV_5R5

DDRV_6K3

DDRV_7R6

DDRV_8L8

DDRV_9M8

DDRV_10D17

DDRV_11A19

MEMTPJ22

MEMTNK22

RVREF_AD18

ARCKEG8

ARCLK1B5

ARCLK1A5

ARCLK0B14

ARCLK0A14

ARODTF13

ARRASE13

ARCASG13

ARCSG15

ARWEH18

ARRESETG16

ARBA0D15

ARBA1F9

ARBA2G18

ARCSXF15

ARA14D11

ARA13F16

ARA12D8

ARA11E11

ARA10G9

ARA9E16

ARA8F11

ARAG17

ARA6F10

ARA5E17

ARA4E10

ARA3E15

ARA2F17

ARA1G10

ARA0F18

ARDQM0D12

ARDQS0D14

ARDQS0C14

ARDQ0B17

ARDQ1D10

ARDQ2C17

ARDQ3C10

ARDQ4C18

ARDQ5B9

ARDQ6E18

ARDQ7D9

ARDQM1C15

ARDQS1A13

ARDQS1B13

ARDQ8B11

ARDQ9B16

ARDQ10A11

ARDQ11A17

ARDQ12C12

ARDQ13A16

ARDQ14C11

ARDQ15C16

ARDQM2A3

ARDQS2D5

ARDQS2C5

ARDQ16E7

ARDQ17B2

ARDQ18C8

ARDQ19B1

ARDQ20A9

ARDQ21C1

ARDQ22C9

ARDQ23C3

ARDQM3C6

ARDQS3A4

ARDQS3B4

ARDQ24A1

ARDQ25B7

ARDQ26C4

ARDQ27C7

ARDQ28B3

ARDQ29A7

ARDQ30A2

ARDQ31D7

AVDD33_MEMPLLA20

AVSS33_MEMPLLH9

IC105LGE2122[A2_M13]

RVREF_CC2

BRCLK0J2

BRCLK0J1

BRCKEL6

BRODTE3

BRRASL4

BRCASD3

BRCSD4

BRBA0J4

BRBA1M6

BRBA2E4

BRWEK4

BRA15J3

BRA14P4

BRA13G5

BRA12P6

BRA11P5

BRA10L5

BRA9F4

BRA8P3

BRA7H4

BRA6P2

BRA5K6

BRA4M5

BRA3K5

BRA2G6

BRA1N5

BRA0E5

DDRV_12B19

DDRV_13C19

DDRV_14D19

DDRV_15E19

DDRV_16F19

DDRV_17G19

DDRV_18F5

DDRV_19H5

DDRV_20N8

DDRV_21P8

DDRV_22D13

DDRV_23E8

DDRV_24G11

DDRV_25D20

DDRV_26E20

DDRV_27F20

DDRV_28G20

DDRV_29R7

DDRV_30R8

DDRV_31T5

DDRV_32T6

DDRV_33T7

DDRV_34T8

BRDQM0L1

BRDQS0H2

BRDQS0H1

BRDQ0E2

BRDQ1N3

BRDQ2E1

BRDQ3N1

BRDQ4D1

BRDQ5P1

BRDQ6D2

BRDQ7N2

BRDQM1H3

BRDQS1K1

BRDQS1K2

BRDQ8N4

BRDQ9F2

BRDQ10M3

BRDQ11F1

BRDQ12L2

BRDQ13F3

BRDQ14M4

BRDQ15G3

BRRESETG4

H5TQ2G63FFR-PBCIC702-*3

DDR_256MB_HYNIX_NC4.5

A0N3

A1P7

A2P3

A3N2

A4P8

A5P2

A6R8

A7R2

A8T8

A9R3

A10/APL7

A11R7

A12/BCN7

A13T3

NC_5M7

BA0M2

BA1N8

BA2M3

CKJ7

CKK7

CKEK9

CSL2

ODTK1

RASJ3

CASK3

WEL3

RESETT2

DQSLF3

DQSLG3

DQSUC7

DQSUB7

DMLE7

DMUD3

DQL0E3

DQL1F7

DQL2F2

DQL3F8

DQL4H3

DQL5H8

DQL6G2

DQL7H7

DQU0D7

DQU1C3

DQU2C8

DQU3C2

DQU4A7

DQU5A2

DQU6B8

DQU7A3

VREFCAM8

VREFDQH1

ZQL8

VDD_1B2

VDD_2D9

VDD_3G7

VDD_4K2

VDD_5K8

VDD_6N1

VDD_7N9

VDD_8R1

VDD_9R9

VDDQ_1A1

VDDQ_2A8

VDDQ_3C1

VDDQ_4C9

VDDQ_5D2

VDDQ_6E9

VDDQ_7F1

VDDQ_8H2

VDDQ_9H9

NC_1J1

NC_2J9

NC_3L1

NC_4L9

NC_6T7

VSS_1A9

VSS_2B3

VSS_3E1

VSS_4G8

VSS_5J2

VSS_6J8

VSS_7M1

VSS_8M9

VSS_9P1

VSS_10P9

VSS_11T1

VSS_12T9

VSSQ_1B1

VSSQ_2B9

VSSQ_3D1

VSSQ_4D8

VSSQ_5E2

VSSQ_6E8

VSSQ_7F9

VSSQ_8G1

VSSQ_9G9

DDR ONE SIDE 12

2011.12.09

Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

Fiber Optic

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATESSPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.FIRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFACTURES SPECIFIED PARTS BE USED FORTHE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

SPDIF_OUTC36020.1uF16V

R36112.7KOPT J

K3602

JST1223-0011

GND

2

VCC

3

VINPUT

4FIX_POLE

+3.3V_NORMAL

R361033

36

JACK HIGH / MID 2011.11.21

SPDIF

SPDIF OUT

Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATESSPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.FIRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFACTURES SPECIFIED PARTS BE USED FORTHE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

LED_R

R410710K

L4111BLM18PG121SN1D

WIFI

M_REMOTE_RX

WOL/ETH_POWER_ON

CTS

R4114100

C41020.1uF

R411710K5%

D41045.6V

AMOTECH CO., LTD.

OPT

M_REMOTE_TX

R41341K

LOGO_LIGHT

+3.5V_ST

C41000.1uF

+3.5V_ST

R4131

22LOGO_LIGHT R4130

22

OPT

+3.5V_ST

+3.5V_ST

C41110.1uF

16V

WIFI

R4132

10K

LOGO_LIGHT Q4100

MMBT3904(NXP)

LOGO_LIGHT

E

B

C

D41015.6V

AMOTECH CO., LTD.OPT

C4113

10uF

10V

WIFI

R4133

10K

OPT

WIFI_DP

WIFI_DM

P4101

12507WR-08L

NON_EYE_Q_8P

1GND

2KEY1

3KEY2

4+3.5V_ST

5GND

6LOGO/LED_R

7IR

8GND

9

L4100BLM18PG121SN1D

M_RFModule_RESET

LOGO_LIGHT

R4113100

C41041000pF50V

R411810K5%

C4107100pF50V

R4125 10K

LED_R

C4112

10uF

10V

WIFI

KEY2

IR

C41200.1uF16V

LOGO_LIGHT

KEY1

+3.5V_ST_WAKE

D41005.6V

AMOTECH CO., LTD.OPT

R413622

WIFI

WOL/WIFI_POWER_ON

P4102

12507WR-10L

EYE_Q_10P

1

2

3

4

5

6

7

8

9

10

11

EYE_SCL

EYE_SDA

D4105

ADMC 5M 02 200L OPT

D4106

ADMC 5M 02 200L

OPT

R4137100

EYE_Q_10P

R4138100

EYE_Q_10P

RTSTP4100

TP4101

TP4102

TP4103

TP4104

P4100

12507WR-06L

WIFI

1

2

3

4

5

6

7

ZD4100

ADLC 5S 02 015 WIFI_ESD

ZD4101

ADLC 5S 02 015 WIFI_ESD

IR / KEY 2011.11.21

41

Place Near Micom

MAX 0.4A

For EMI

Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATESSPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.FIRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFACTURES SPECIFIED PARTS BE USED FORTHE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

COMP1/AV1/DVI_R_IN

COMP1/AV1/DVI_L_IN

SOC_RX

AV1_CVBS_DET

COMP1_DET

C38000.1uF16V

COMP1_Y/AV1_CVBS

+3.3V_NORMAL

+3.5V_ST

COMP1_Pb

+3.3V_NORMAL

D38005.6V

AV_COMP_ESDD38015.6V

AV_COMP_ESD

R381010K

DTV/MNT_V_OUT_SOC

P3800

12507WS-04L

UART_4PIN_STRAIGHT

1

2

3

4

5

COMP1_Pr

D38025.6V

AV_COMP_ESD

R380610K

D38035.6V

AV_COMP_ESD

SOC_TX

ZD3804

ADUC 5S 02 0R5L

OPT

R3800

751%

TU_DEBUG

JK3800PPJ245-01

NON_Mold_AV

6A[GN]C-SPRING

7A[GN]E-LUG

4A[GN]CONTACT

5B[BL]C-SPRING

8C[RD1]E-LUG-S

6C[RD1]C-SPRING

4C[RD1]CONTACT

5D[WH]C-SPRING

4E

[RD2]CONTACT6E

[RD2]C-SPRING7E

[RD2]E-LUG

R38010

OPT

R38111K

R38121K

JK3800-*1PPJ245N2-01Mold_AV

6A [GN/YL]O-SPRING

7A [GN/YL]E-LUG

4A [GN/YL]CONTACT

5B [BL]O-SPRING

8C [RD1]E-LUG-S

6C [RD1]O-SPRING

4C [RD1]CONTACT

5D [WH]O-SPRING

4E [RD2]CONTACT

6E [RD2]O-SPRING

7E [RD2]E-LUG

38

JACK_COMMON 2011.11.21

AV/COMPONENT REAR

DEBUG FOR INTERNAL AMOD.

UART FOR DEBUG

For TU_DebugDisconnet R374

Apply "AV_COMP_ESD" when your model’s ESD Test is failed

Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

THERMAL

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATESSPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.FIRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFACTURES SPECIFIED PARTS BE USED FORTHE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

R541112

0.1uF

C5413

16V

AMP_MUTE

0.1uFC5420

50V

R5418

5.1K

R5415

5.1K

+24V_AMP

AUD_LRCH

SPK_R-

R5403 100

+24V

R541012

C5416

22000pF

50V

SPK_R-

L5401BLM18PG121SN1D

0.1uF

C5421

50V

R540712

C54271uF10V

R5400 10K

AMP_MUTE_MICOM

AUD_SCK

+24V_AMP

C54340.47uF50V

R5402 100

SPK_L-

0.1uFC5436

50V

+3.3V_NORMAL

SPK_R+

R540912

0.1uFC5418

50V

AUD_MASTER_CLK

SPK_R+

I2C_SCL1

0.1uF

C5439

50V

0.1uFC5437

50V

R541412

R5405 100

AMP_MUTE_MICOM

R54063.3

OPT

0.1uFC5400

50V

C542522000pF50V

AUD_LRCK

C5430390pF50V

R541312

P5400

WAFER-ANGLE

1

2

3

4

C54281uF10V

SPK_L-

C540833pF50V

C54400.1uF16V

OPT

C541410uF10V

C54151000pF

50V

C540633pF50V

C54240.01uF50V

OPT

AMP_RESET_N

C54331uF10V

C5431390pF50V

C54110.1uF16V

C5432390pF50V

+24V_AMP

+3.3V_NORMAL

C542622000pF50V

R540110K

AMP_MUTE_MICOM

R540812

0.1uF

C5438

50V

R541212

R5417

5.1K

SPK_L+

C5417

22000pF

50V

0.1uFC5401

50V

I2C_SDA1

0.1uF

C5419

50V

C54350.47uF50V

SPK_L+

Q5400MMBT3904(NXP)AMP_MUTE_MICOME

B

C

C5429390pF50V

C54041000pF

50V

R5416

5.1K

L5404-*1

NRS6045T100MMGKAudio_Coil_TAIYO

10.0uH

L5405-*1

NRS6045T100MMGK

Audio_Coil_TAIYO10.0uH

L5402-*1

NRS6045T100MMGK

Audio_Coil_TAIYO10.0uH

L5403-*1

NRS6045T100MMGK

Audio_Coil_TAIYO10.0uH

1uFC5412

10V

L5404

LPH6045T-100M

Audio_Coil_ABCO10uH

L5405

LPH6045T-100M

Audio_Coil_ABCO10uH

L5402

LPH6045T-100M

Audio_Coil_ABCO10uH

L5403

LPH6045T-100M

Audio_Coil_ABCO10uH

IC5400

NTP7513

3DGND_PLL2VDD_PLL

4GND

1AGND_PLL

6DVDD5DGND

7SDATA

8WCK

9BCK

10SDA

11

SCL

12

FAULT

13

MONITOR_0

14

MONITOR_1

15

MONITOR_2

16

BST2B

17

PGND2B

18

OUT2B

19

PVDD2B

20

PVDD2A

21 OUT2A22 PGND2A23 BST2A24 VDR225 AGND26 VCC527 VDR128 BST1B29 PGND1B30 OUT1B

31

PVDD1B

32

PVDD1A

33

OUT1A

34

PGND1A

35

BST1A

36

RESET

37

AD

38

CLK_I

39

GND_IO

40

VDD_IO

41

[EP]GND

C542210uF35V

C5423

10uF

35V

R5419

100

AMP_MUTE_PWR_DET

POWER_DET

L5400UBW2012-121F

54

AMP_NEO 2011.11.21

SPEAKER_R

SPEAKER_L

0x54

DUAL COMPONENT

Q1801 1ST : 0TRIY80001A 2ND : 0TR387500AA

[AMP_MUTE_PWR_DET]

-->For fixing AC-OFF POP noise 32"POLA/ROW model-->32"POLA/ROW LPB’s 3.5st drop time is very fast

Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATESSPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.FIRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFACTURES SPECIFIED PARTS BE USED FORTHE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

R610010K

HP_OUTC61011uF10VHP_OUT

C61001uF10VHP_OUT

+3.3V_NORMAL

C61051uF10V

HP_OUT

R610110K

HP_OUT

HP_LOUT_AMP

HP_LOUT_MAIN

SIDE_HP_MUTE

+3.3V_NORMAL

R610443K

1%

HP_OUT

R610333K

HP_OUT_MTK

C61021uF10V

HP_OUT

R61054.7K

HP_OUT

C61031uF10V

HP_OUT

HP_ROUT_MAIN

L6100120-ohm

HP_OUT

BLM18PG121SN1D

C6104

180pF

HP_OUT_MTK

R610643K

1%

HP_OUT

C61070.1uF16V

HP_OUT

C6109180pF

HP_OUT_MTK

R6102

33KHP_OUT_MTK

HP_ROUT_AMP

C6104-*1

18pF

HP_OUT_H13C6109-*118pF

HP_OUT_H13

C610810pF50V

HP_OUT

C610610pF50V

HP_OUT

IC6100TPA6138A2

HP_OUT

3OUTR

2-INR

4GND_1

1+INR

6VSS

5MUTE

7CN

8CP

9VDD

10GND_2

11UVP

12OUTL

13-INL

14+INL

R6103-*143K

1%

HP_OUT_H13 R6102-*143K

1%

HP_OUT_H13

2011.09.29HEADPHONE AMP

61

EARPHONE AMP

Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATESSPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.FIRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFACTURES SPECIFIED PARTS BE USED FORTHE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

L/DIM0_VS_PWR

L/DIM0_SCLK_PWR

R760110KL/DIM_OUT_8P

P7600

12507WR-08L

L/DIM_OUT_8P

1

2

3

4

5

6

7

8

9

L/DIM0_MOSI_PWR

R760233

L/DIM_OUT_8P

R760333

L/DIM_OUT_8PI2C_SCL1

I2C_SDA1

76

LOCAL DIMMING 2011.12.13

[To LED DRIVER]

LOCAL DIMMING

Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATESSPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.FIRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFACTURES SPECIFIED PARTS BE USED FORTHE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

EMMC_DATA[4]

EMMC_DATA[1]

EMMC_DATA[6]

EMMC_DATA[5]

EMMC_DATA[3]

EMMC_DATA[2]

EMMC_DATA[7]

EMMC_DATA[0]

3.3V_EMMC

AR8101221/16W

EMMC_SERIAL_22

EMMC_RST

EMMC_CMD_BALL

R8104-*1

47K

C81050.1uF16V

EMMC_CMD_BALL

R8106-*1

47K

R8102-*1

47K

R8105-*1

47K

R8101-*1

47K

DAT4

R8104

10K

DAT4

EMMC_RESET_BALL

AR8100221/16W

EMMC_SERIAL_22

DAT6

R8117

10K

R8106

10K

DAT3

EMMC_CLK_BALL

EMMC_CLK_BALL

C81020.1uF16V

EMMC_CLK AR8102 22

EMMC_SERIAL_22

EMMC_VDDI

EMMC_RESET_BALL

DAT5

DAT5

EMMC_DATA[0-7]

C81032.2uF10V

R8116

10K

R8107

10K

R8107-*1

47K

R8103

10K

R8103-*1

47K

R8101

10K

R8105

10K

DAT3

R8100

10K

IC8100-*3KLM2G1HE3F-B001

SAMSUNG_EMMC_2GB

DAT0A3

DAT1A4

DAT2A5

DAT3B2

DAT4B3

DAT5B4

DAT6B5

DAT7B6

CLKM6

CMDM5

NC_3A6

NC_4A7

NC_23C5

NC_42E5

NC_43E8

NC_44E9

NC_45E10

NC_52F10

NC_58G3

NC_59G10

NC_66H5

NC_73J5

NC_80K6

NC_81K7

NC_82K10

NC_116P7

NC_119P10

RSTNK5

VDD_1C6

VDD_2M4

VDD_3N4

VDD_4P3

VDD_5P5

VDDF_1E6

VDDF_2F5

VDDF_3J10

VDDF_4K9

VDDIC2

VSS_1C4

VSS_2E7

VSS_3G5

VSS_4H10

VSS_5K8

VSS_6N2

VSS_7N5

VSS_8P4

VSS_9P6

NC_1A1

NC_2A2

NC_5A8

NC_6A9

NC_7A10

NC_8A11

NC_9A12

NC_10A13

NC_11A14

NC_12B1

NC_13B7

NC_14B8

NC_15B9

NC_16B10

NC_17B11

NC_18B12

NC_19B13

NC_20B14

NC_21C1

NC_22C3

NC_24C7

NC_25C8

NC_26C9

NC_27C10

NC_28C11

NC_29C12

NC_30C13

NC_31C14

NC_32D1

NC_33D2

NC_34D3

NC_35D4

NC_36D12

NC_37D13

NC_38D14

NC_39E1

NC_40E2

NC_41E3

NC_46E12

NC_47E13

NC_48E14

NC_49F1

NC_50F2

NC_51F3

NC_53F12

NC_54F13

NC_55F14

NC_56G1

NC_57G2

NC_60G12

NC_61G13

NC_62G14

NC_63H1

NC_64H2

NC_65H3

NC_67H12

NC_68H13

NC_69H14

NC_70J1

NC_71J2

NC_72J3

NC_74J12

NC_75J13

NC_76J14

NC_77K1

NC_78K2

NC_79K3

NC_83K12

NC_84K13

NC_85K14

NC_86L1

NC_87L2

NC_88L3

NC_89L12

NC_90L13

NC_91L14

NC_92M1

NC_93M2

NC_94M3

NC_95M7

NC_96M8

NC_97M9

NC_98M10

NC_99M11

NC_100M12

NC_101M13

NC_102M14

NC_103N1

NC_104N3

NC_105N6

NC_106N7

NC_107N8

NC_108N9

NC_109N10

NC_110N11

NC_111N12

NC_112N13

NC_113N14

NC_114P1

NC_115P2

NC_117P8

NC_118P9

NC_120P11

NC_121P12

NC_122P13

NC_123P14

3.3V_EMMC

DAT5

DAT6

C81000.1uF16V

OPT

C81062.2uF10V

R8100-*1

47K

EMMC_VDDI

EMMC_CMD

C810710pF50V

OPT

R8102

10K

3.3V_EMMC

IC8100-*4THGBM5G7A2JBAIR

TOSHIBA_EMMC_16GB

DAT0A3

DAT1A4

DAT2A5

DAT3B2

DAT4B3

DAT5B4

DAT6B5

DAT7B6

CLKM6

CMDM5

RFU_1A6

RFU_2A7

NC_21C5

RFU_3E5

RFU_4E8

RFU_5E9

RFU_6E10

RFU_7F10

RFU_8G3

RFU_9G10

RFU_10H5

RFU_11J5

RFU_12K6

RFU_13K7

RFU_14K10

RFU_15P7

RFU_16P10

RSTNK5

VCCQ_1C6

VCCQ_2M4

VCCQ_3N4

VCCQ_4P3

VCCQ_5P5

VCC_1E6

VCC_2F5

VCC_3J10

VCC_4K9

VDDIC2

VSS_1E7

VSS_2G5

VSS_3H10

VSS_4K8

VSSQ_1C4

VSSQ_2N2

VSSQ_3N5

VSSQ_4P4

VSSQ_5P6

NC_1A1

NC_2A2

NC_3A8

NC_4A9

NC_5A10

NC_6A11

NC_7A12

NC_8A13

NC_9A14

NC_10B1

NC_11B7

NC_12B8

NC_13B9

NC_14B10

NC_15B11

NC_16B12

NC_17B13

NC_18B14

NC_19C1

NC_20C3

NC_22C7

NC_23C8

NC_24C9

NC_25C10

NC_26C11

NC_27C12

NC_28C13

NC_29C14

NC_30D1

NC_31D2

NC_32D3

NC_33D4

NC_34D12

NC_35D13

NC_36D14

NC_37E1

NC_38E2

NC_39E3

NC_40E12

NC_41E13

NC_42E14

NC_43F1

NC_44F2

NC_45F3

NC_46F12

NC_47F13

NC_48F14

NC_49G1

NC_50G2

NC_51G12

NC_52G13

NC_53G14

NC_54H1

NC_55H2

NC_56H3

NC_57H12

NC_58H13

NC_59H14

NC_60J1

NC_61J2

NC_62J3

NC_63J12

NC_64J13

NC_65J14

NC_66K1

NC_67K2

NC_68K3

NC_69K12

NC_70K13

NC_71K14

NC_72L1

NC_73L2

NC_74L3

NC_75L12

NC_76L13

NC_77L14

NC_78M1

NC_79M2

NC_80M3

NC_81M7

NC_82M8

NC_83M9

NC_84M10

NC_85M11

NC_86M12

NC_87M13

NC_88M14

NC_89N1

NC_90N3

NC_91N6

NC_92N7

NC_93N8

NC_94N9

NC_95N10

NC_96N11

NC_97N12

NC_98N13

NC_99N14

NC_100P1

NC_101P2

NC_102P8

NC_103P9

NC_104P11

NC_105P12

NC_106P13

NC_107P14

AR8100-*11001/16W

EMMC_SERIAL_100

AR8101-*11001/16W

EMMC_SERIAL_100

AR8102-*11001/16W

EMMC_SERIAL_100

IC8100-*5KLM4G1FE3B-B001

SAMSUNG_EMMC_4GB

DAT0A3

DAT1A4

DAT2A5

DAT3B2

DAT4B3

DAT5B4

DAT6B5

DAT7B6

CLKM6

CMDM5

NC_3A6

NC_4A7

NC_23C5

NC_42E5

NC_43E8

NC_44E9

NC_45E10

NC_52F10

NC_58G3

NC_59G10

NC_66H5

NC_73J5

NC_80K6

NC_81K7

NC_82K10

NC_116P7

NC_119P10

RSTNK5

VDD_1C6

VDD_2M4

VDD_3N4

VDD_4P3

VDD_5P5

VDDF_1E6

VDDF_2F5

VDDF_3J10

VDDF_4K9

VDDIC2

VSS_2E7

VSS_3G5

VSS_4H10

VSS_5K8

VSS_1C4

VSS_6N2

VSS_7N5

VSS_8P4

VSS_9P6

NC_1A1

NC_2A2

NC_5A8

NC_6A9

NC_7A10

NC_8A11

NC_9A12

NC_10A13

NC_11A14

NC_12B1

NC_13B7

NC_14B8

NC_15B9

NC_16B10

NC_17B11

NC_18B12

NC_19B13

NC_20B14

NC_21C1

NC_22C3

NC_24C7

NC_25C8

NC_26C9

NC_27C10

NC_28C11

NC_29C12

NC_30C13

NC_31C14

NC_32D1

NC_33D2

NC_34D3

NC_35D4

NC_36D12

NC_37D13

NC_38D14

NC_39E1

NC_40E2

NC_41E3

NC_46E12

NC_47E13

NC_48E14

NC_49F1

NC_50F2

NC_51F3

NC_53F12

NC_54F13

NC_55F14

NC_56G1

NC_57G2

NC_60G12

NC_61G13

NC_62G14

NC_63H1

NC_64H2

NC_65H3

NC_67H12

NC_68H13

NC_69H14

NC_70J1

NC_71J2

NC_72J3

NC_74J12

NC_75J13

NC_76J14

NC_77K1

NC_78K2

NC_79K3

NC_83K12

NC_84K13

NC_85K14

NC_86L1

NC_87L2

NC_88L3

NC_89L12

NC_90L13

NC_91L14

NC_92M1

NC_93M2

NC_94M3

NC_95M7

NC_96M8

NC_97M9

NC_98M10

NC_99M11

NC_100M12

NC_101M13

NC_102M14

NC_103N1

NC_104N3

NC_105N6

NC_106N7

NC_107N8

NC_108N9

NC_109N10

NC_110N11

NC_111N12

NC_112N13

NC_113N14

NC_114P1

NC_115P2

NC_117P8

NC_118P9

NC_120P11

NC_121P12

NC_122P13

NC_123P14

IC8100-*6THGBM5G6A2JBAIR

TOSHIBA_EMMC_8GB

DAT0A3

DAT1A4

DAT2A5

DAT3B2

DAT4B3

DAT5B4

DAT6B5

DAT7B6

CLKM6

CMDM5

RFU_1A6

RFU_2A7

NC_21C5

RFU_3E5

RFU_4E8

RFU_5E9

RFU_6E10

RFU_7F10

RFU_8G3

RFU_9G10

RFU_10H5

RFU_11J5

RFU_12K6

RFU_13K7

RFU_14K10

RFU_15P7

RFU_16P10

RSTNK5

VCCQ_1C6

VCCQ_2M4

VCCQ_3N4

VCCQ_4P3

VCCQ_5P5

VCC_1E6

VCC_2F5

VCC_3J10

VCC_4K9

VDDIC2

VSS_1E7

VSS_2G5

VSS_3H10

VSS_4K8

VSSQ_1C4

VSSQ_2N2

VSSQ_3N5

VSSQ_4P4

VSSQ_5P6

NC_1A1

NC_2A2

NC_3A8

NC_4A9

NC_5A10

NC_6A11

NC_7A12

NC_8A13

NC_9A14

NC_10B1

NC_11B7

NC_12B8

NC_13B9

NC_14B10

NC_15B11

NC_16B12

NC_17B13

NC_18B14

NC_19C1

NC_20C3

NC_22C7

NC_23C8

NC_24C9

NC_25C10

NC_26C11

NC_27C12

NC_28C13

NC_29C14

NC_30D1

NC_31D2

NC_32D3

NC_33D4

NC_34D12

NC_35D13

NC_36D14

NC_37E1

NC_38E2

NC_39E3

NC_40E12

NC_41E13

NC_42E14

NC_43F1

NC_44F2

NC_45F3

NC_46F12

NC_47F13

NC_48F14

NC_49G1

NC_50G2

NC_51G12

NC_52G13

NC_53G14

NC_54H1

NC_55H2

NC_56H3

NC_57H12

NC_58H13

NC_59H14

NC_60J1

NC_61J2

NC_62J3

NC_63J12

NC_64J13

NC_65J14

NC_66K1

NC_67K2

NC_68K3

NC_69K12

NC_70K13

NC_71K14

NC_72L1

NC_73L2

NC_74L3

NC_75L12

NC_76L13

NC_77L14

NC_78M1

NC_79M2

NC_80M3

NC_81M7

NC_82M8

NC_83M9

NC_84M10

NC_85M11

NC_86M12

NC_87M13

NC_88M14

NC_89N1

NC_90N3

NC_91N6

NC_92N7

NC_93N8

NC_94N9

NC_95N10

NC_96N11

NC_97N12

NC_98N13

NC_99N14

NC_100P1

NC_101P2

NC_102P8

NC_103P9

NC_104P11

NC_105P12

NC_106P13

NC_107P14

IC8100-*1THGBM5G5A1JBAIR

TOSHIBA_EMMC_4GB

DAT0A3

DAT1A4

DAT2A5

DAT3B2

DAT4B3

DAT5B4

DAT6B5

DAT7B6

CLKM6

CMDM5

RFU_1A6

RFU_2A7

NC_21C5

RFU_3E5

RFU_4E8

RFU_5E9

RFU_6E10

RFU_7F10

RFU_8G3

RFU_9G10

RFU_10H5

RFU_11J5

RFU_12K6

RFU_13K7

RFU_14K10

RFU_15P7

RFU_16P10

RST_NK5

VCCQ_1C6

VCCQ_2M4

VCCQ_3N4

VCCQ_4P3

VCCQ_5P5

VCC_1E6

VCC_2F5

VCC_3J10

VCC_4K9

VDDIC2

VSS_1E7

VSS_2G5

VSS_3H10

VSS_4K8

VSSQ_1C4

VSSQ_2N2

VSSQ_3N5

VSSQ_4P4

VSSQ_5P6

NC_1A1

NC_2A2

NC_3A8

NC_4A9

NC_5A10

NC_6A11

NC_7A12

NC_8A13

NC_9A14

NC_10B1

NC_11B7

NC_12B8

NC_13B9

NC_14B10

NC_15B11

NC_16B12

NC_17B13

NC_18B14

NC_19C1

NC_20C3

NC_22C7

NC_23C8

NC_24C9

NC_25C10

NC_26C11

NC_27C12

NC_28C13

NC_29C14

NC_30D1

NC_31D2

NC_32D3

NC_33D4

NC_34D12

NC_35D13

NC_36D14

NC_37E1

NC_38E2

NC_39E3

NC_40E12

NC_41E13

NC_42E14

NC_43F1

NC_44F2

NC_45F3

NC_46F12

NC_47F13

NC_48F14

NC_49G1

NC_50G2

NC_51G12

NC_52G13

NC_53G14

NC_54H1

NC_55H2

NC_56H3

NC_57H12

NC_58H13

NC_59H14

NC_60J1

NC_61J2

NC_62J3

NC_63J12

NC_64J13

NC_65J14

NC_66K1

NC_67K2

NC_68K3

NC_69K12

NC_70K13

NC_71K14

NC_72L1

NC_73L2

NC_74L3

NC_75L12

NC_76L13

NC_77L14

NC_78M1

NC_79M2

NC_80M3

NC_81M7

NC_82M8

NC_83M9

NC_84M10

NC_85M11

NC_86M12

NC_87M13

NC_88M14

NC_89N1

NC_90N3

NC_91N6

NC_92N7

NC_93N8

NC_94N9

NC_95N10

NC_96N11

NC_97N12

NC_98N13

NC_99N14

NC_100P1

NC_101P2

NC_102P8

NC_103P9

NC_104P11

NC_105P12

NC_106P13

NC_107P14

IC8100H26M31002GPR

HYNIX_EMMC_4GB

DAT0A3

DAT1A4

DAT2A5

DAT3B2

DAT4B3

DAT5B4

DAT6B5

DAT7B6

CLKM6

CMDM5

NC_3A6

NC_4A7

NC_23C5

NC_42E5

NC_43E8

NC_44E9

NC_45E10

NC_52F10

NC_58G3

NC_59G10

NC_66H5

NC_73J5

NC_80K6

NC_81K7

NC_82K10

NC_116P7

NC_119P10

RESETK5

VCCQ_1C6

VCCQ_2M4

VCCQ_3N4

VCCQ_4P3

VCCQ_5P5

VCC_1E6

VCC_2F5

VCC_3J10

VCC_4K9

VDDIC2

VSS_1E7

VSS_2G5

VSS_3H10

VSS_4K8

VSSQ_1C4

VSSQ_2N2

VSSQ_3N5

VSSQ_4P4

VSSQ_5P6

NC_1A1

NC_2A2

NC_5A8

NC_6A9

NC_7A10

NC_8A11

NC_9A12

NC_10A13

NC_11A14

NC_12B1

NC_13B7

NC_14B8

NC_15B9

NC_16B10

NC_17B11

NC_18B12

NC_19B13

NC_20B14

NC_21C1

NC_22C3

NC_24C7

NC_25C8

NC_26C9

NC_27C10

NC_28C11

NC_29C12

NC_30C13

NC_31C14

NC_32D1

NC_33D2

NC_34D3

NC_35D4

NC_36D12

NC_37D13

NC_38D14

NC_39E1

NC_40E2

NC_41E3

NC_46E12

NC_47E13

NC_48E14

NC_49F1

NC_50F2

NC_51F3

NC_53F12

NC_54F13

NC_55F14

NC_56G1

NC_57G2

NC_60G12

NC_61G13

NC_62G14

NC_63H1

NC_64H2

NC_65H3

NC_67H12

NC_68H13

NC_69H14

NC_70J1

NC_71J2

NC_72J3

NC_74J12

NC_75J13

NC_76J14

NC_77K1

NC_78K2

NC_79K3

NC_83K12

NC_84K13

NC_85K14

NC_86L1

NC_87L2

NC_88L3

NC_89L12

NC_90L13

NC_91L14

NC_92M1

NC_93M2

NC_94M3

NC_95M7

NC_96M8

NC_97M9

NC_98M10

NC_99M11

NC_100M12

NC_101M13

NC_102M14

NC_103N1

NC_104N3

NC_105N6

NC_106N7

NC_107N8

NC_108N9

NC_109N10

NC_110N11

NC_111N12

NC_112N13

NC_113N14

NC_114P1

NC_115P2

NC_117P8

NC_118P9

NC_120P11

NC_121P12

NC_122P13

NC_123P14

DUMMY_1DU1

DUMMY_2DU2

DUMMY_3DU3

DUMMY_4DU4

DUMMY_5DU5

DUMMY_6DU6

DUMMY_7DU7

DUMMY_8DU8

DUMMY_9DU9

DUMMY_10DU10

DUMMY_11DU11

DUMMY_12DU12

DUMMY_13DU13

DUMMY_14DU14

DUMMY_15DU15

DUMMY_16DU16

IC8100-*2H26M21001ECR

HYNIX_EMMC_2GB

DAT0A3

DAT1A4

DAT2A5

DAT3B2

DAT4B3

DAT5B4

DAT6B5

DAT7B6

CLKM6

CMDM5

NC_3A6

NC_4A7

NC_23C5

NC_42E5

NC_43E8

NC_44E9

NC_45E10

NC_52F10

NC_58G3

NC_59G10

NC_66H5

NC_73J5

NC_80K6

NC_81K7

NC_82K10

NC_116P7

NC_119P10

RESETK5

VCCQ_1C6

VCCQ_2M4

VCCQ_3N4

VCCQ_4P3

VCCQ_5P5

VCC_1E6

VCC_2F5

VCC_3J10

VCC_4K9

VDDIC2

VSS_1E7

VSS_2G5

VSS_3H10

VSS_4K8

VSSQ_1C4

VSSQ_2N2

VSSQ_3N5

VSSQ_4P4

VSSQ_5P6

NC_1A1

NC_2A2

NC_5A8

NC_6A9

NC_7A10

NC_8A11

NC_9A12

NC_10A13

NC_11A14

NC_12B1

NC_13B7

NC_14B8

NC_15B9

NC_16B10

NC_17B11

NC_18B12

NC_19B13

NC_20B14

NC_21C1

NC_22C3

NC_24C7

NC_25C8

NC_26C9

NC_27C10

NC_28C11

NC_29C12

NC_30C13

NC_31C14

NC_32D1

NC_33D2

NC_34D3

NC_35D4

NC_36D12

NC_37D13

NC_38D14

NC_39E1

NC_40E2

NC_41E3

NC_46E12

NC_47E13

NC_48E14

NC_49F1

NC_50F2

NC_51F3

NC_53F12

NC_54F13

NC_55F14

NC_56G1

NC_57G2

NC_60G12

NC_61G13

NC_62G14

NC_63H1

NC_64H2

NC_65H3

NC_67H12

NC_68H13

NC_69H14

NC_70J1

NC_71J2

NC_72J3

NC_74J12

NC_75J13

NC_76J14

NC_77K1

NC_78K2

NC_79K3

NC_83K12

NC_84K13

NC_85K14

NC_86L1

NC_87L2

NC_88L3

NC_89L12

NC_90L13

NC_91L14

NC_92M1

NC_93M2

NC_94M3

NC_95M7

NC_96M8

NC_97M9

NC_98M10

NC_99M11

NC_100M12

NC_101M13

NC_102M14

NC_103N1

NC_104N3

NC_105N6

NC_106N7

NC_107N8

NC_108N9

NC_109N10

NC_110N11

NC_111N12

NC_112N13

NC_113N14

NC_114P1

NC_115P2

NC_117P8

NC_118P9

NC_120P11

NC_121P12

NC_122P13

NC_123P14

IC8100-*7KLMAG2GE4A-A001

SAMSUNG_EMMC_16G

DAT0A3

DAT1A4

DAT2A5

DAT3B2

DAT4B3

DAT5B4

DAT6B5

DAT7B6

CLKM6

CMDM5

RFU_1A6

RFU_2A7

RFU_3C5

RFU_4E5

RFU_5E8

RFU_6E9

NC_39E10

RFU_7F10

RFU_8G3

RFU_9G10

RFU_10H5

RFU_11J5

RFU_12K6

RFU_13K7

RFU_14K10

RFU_15P7

NC_104P10

RESETK5

VDD_1C6

VDD_2M4

VDD_3N4

VDD_4P3

VDD_5P5

VDDF_1E6

VDDF_2F5

VDDF_3J10

VDDF_4K9

VDDIC2

VSS_2E7

VSS_3G5

VSS_4H10

VSS_9K8

VSS_1C4

VSS_5N2

VSS_6N5

VSS_7P4

VSS_8P6

NC_1A1

NC_2A2

NC_3A8

NC_4A9

NC_5A10

NC_6A11

NC_7A12

NC_8A13

NC_9A14

NC_10B1

NC_11B7

NC_12B8

NC_13B9

NC_14B10

NC_15B11

NC_16B12

NC_17B13

NC_18B14

NC_19C1

NC_20C3

NC_21C7

NC_22C8

NC_23C9

NC_24C10

NC_25C11

NC_26C12

NC_27C13

NC_28C14

NC_29D1

NC_30D2

NC_31D3

NC_32D4

NC_33D12

NC_34D13

NC_35D14

NC_36E1

NC_37E2

NC_38E3

NC_40E12

NC_41E13

NC_42E14

NC_43F1

NC_44F2

NC_45F3

NC_46F12

NC_47F13

NC_48F14

NC_49G1

NC_50G2

NC_51G12

NC_52G13

NC_53G14

NC_54H1

NC_55H2

NC_56H3

NC_57H12

NC_58H13

NC_59H14

NC_60J1

NC_61J2

NC_62J3

NC_63J12

NC_64J13

NC_65J14

NC_66K1

NC_67K2

NC_68K3

NC_69K12

NC_70K13

NC_71K14

NC_72L1

NC_73L2

NC_74L3

NC_75L12

NC_76L13

NC_77L14

NC_78M1

NC_79M2

NC_80M3

NC_81M7

NC_82M8

NC_83M9

NC_84M10

NC_85M11

NC_86M12

NC_87M13

NC_88M14

NC_89N1

NC_90N3

NC_91N6

NC_92N7

NC_93N8

NC_94N9

NC_95N10

NC_96N11

NC_97N12

NC_98N13

NC_99N14

NC_100P1

NC_101P2

NC_102P8

NC_103P9

RFU_16P11

NC_105P12

NC_106P13

NC_107P14

DUMMY_1DU1

DUMMY_2DU2

DUMMY_3DU3

DUMMY_4DU4

DUMMY_5DU5

DUMMY_6DU6

DUMMY_7DU7

DUMMY_8DU8

DUMMY_9DU9

DUMMY_10DU10

DUMMY_11DU11

DUMMY_12DU12

DUMMY_13DU13

DUMMY_14DU14

DUMMY_15DU15

DUMMY_16DU16

IC8100-*8H26M42002GMR

HYNIX_EMMC_8GB

DAT0A3

DAT1A4

DAT2A5

DAT3B2

DAT4B3

DAT5B4

DAT6B5

DAT7B6

CLKM6

CMDM5

NC_3A6

NC_4A7

NC_23C5

NC_42E5

NC_43E8

NC_44E9

NC_45E10

NC_52F10

NC_58G3

NC_59G10

NC_66H5

NC_73J5

NC_80K6

NC_81K7

NC_82K10

NC_116P7

NC_119P10

RESETK5

VCCQ_1C6

VCCQ_2M4

VCCQ_3N4

VCCQ_4P3

VCCQ_5P5

VCC_1E6

VCC_2F5

VCC_3J10

VCC_4K9

VDDIC2

VSS_1E7

VSS_2G5

VSS_3H10

VSS_4K8

VSSQ_1C4

VSSQ_2N2

VSSQ_3N5

VSSQ_4P4

VSSQ_5P6

NC_1A1

NC_2A2

NC_5A8

NC_6A9

NC_7A10

NC_8A11

NC_9A12

NC_10A13

NC_11A14

NC_12B1

NC_13B7

NC_14B8

NC_15B9

NC_16B10

NC_17B11

NC_18B12

NC_19B13

NC_20B14

NC_21C1

NC_22C3

NC_24C7

NC_25C8

NC_26C9

NC_27C10

NC_28C11

NC_29C12

NC_30C13

NC_31C14

NC_32D1

NC_33D2

NC_34D3

NC_35D4

NC_36D12

NC_37D13

NC_38D14

NC_39E1

NC_40E2

NC_41E3

NC_46E12

NC_47E13

NC_48E14

NC_49F1

NC_50F2

NC_51F3

NC_53F12

NC_54F13

NC_55F14

NC_56G1

NC_57G2

NC_60G12

NC_61G13

NC_62G14

NC_63H1

NC_64H2

NC_65H3

NC_67H12

NC_68H13

NC_69H14

NC_70J1

NC_71J2

NC_72J3

NC_74J12

NC_75J13

NC_76J14

NC_77K1

NC_78K2

NC_79K3

NC_83K12

NC_84K13

NC_85K14

NC_86L1

NC_87L2

NC_88L3

NC_89L12

NC_90L13

NC_91L14

NC_92M1

NC_93M2

NC_94M3

NC_95M7

NC_96M8

NC_97M9

NC_98M10

NC_99M11

NC_100M12

NC_101M13

NC_102M14

NC_103N1

NC_104N3

NC_105N6

NC_106N7

NC_107N8

NC_108N9

NC_109N10

NC_110N11

NC_111N12

NC_112N13

NC_113N14

NC_114P1

NC_115P2

NC_117P8

NC_118P9

NC_120P11

NC_121P12

NC_122P13

NC_123P14

C81041uF6.3V

105C

IC8100-*9

MTFC4GMVEA-1M WT

MICRON_EMMC_4GB

DAT0A3

DAT1A4

DAT2A5

DAT3B2

DAT4B3

DAT5B4

DAT6B5

DAT7B6

CLKM6

CMDM5

RFU_1A6

RFU_2A7

NC_21C5

RFU_3E5

RFU_4E8

RFU_5E9

RFU_6E10

RFU_7F10

RFU_8G3

RFU_9G10

RFU_10H5

RFU_11J5

RFU_12K6

RFU_13K7

RFU_14K10

RFU_15P7

RFU_16P10

RSTNK5

VCCQ_1C6

VCCQ_2M4

VCCQ_3N4

VCCQ_4P3

VCCQ_5P5

VCC_1E6

VCC_2F5

VCC_3J10

VCC_4K9

VDDIC2

VSS_1E7

VSS_2G5

VSS_3H10

VSS_4K8

VSSQ_1C4

VSSQ_2N2

VSSQ_3N5

VSSQ_4P4

VSSQ_5P6

NC_1A1

NC_2A2

NC_3A8

NC_4A9

NC_5A10

NC_6A11

NC_7A12

NC_8A13

NC_9A14

NC_10B1

NC_11B7

NC_12B8

NC_13B9

NC_14B10

NC_15B11

NC_16B12

NC_17B13

NC_18B14

NC_19C1

NC_20C3

NC_22C7

NC_23C8

NC_24C9

NC_25C10

NC_26C11

NC_27C12

NC_28C13

NC_29C14

NC_30D1

NC_31D2

NC_32D3

NC_33D4

NC_34D12

NC_35D13

NC_36D14

NC_37E1

NC_38E2

NC_39E3

NC_40E12

NC_41E13

NC_42E14

NC_43F1

NC_44F2

NC_45F3

NC_46F12

NC_47F13

NC_48F14

NC_49G1

NC_50G2

NC_51G12

NC_52G13

NC_53G14

NC_54H1

NC_55H2

NC_56H3

NC_57H12

NC_58H13

NC_59H14

NC_60J1

NC_61J2

NC_62J3

NC_63J12

NC_64J13

NC_65J14

NC_66K1

NC_67K2

NC_68K3

NC_69K12

NC_70K13

NC_71K14

NC_72L1

NC_73L2

NC_74L3

NC_75L12

NC_76L13

NC_77L14

NC_78M1

NC_79M2

NC_80M3

NC_81M7

NC_82M8

NC_83M9

NC_84M10

NC_85M11

NC_86M12

NC_87M13

NC_88M14

NC_89N1

NC_90N3

NC_91N6

NC_92N7

NC_93N8

NC_94N9

NC_95N10

NC_96N11

NC_97N12

NC_98N13

NC_99N14

NC_100P1

NC_101P2

NC_102P8

NC_103P9

NC_104P11

NC_105P12

NC_106P13

NC_107P14

IC8100-*11THGBMAG5A1JBAIR

DEV_EMMC4.5_TOSHIBA_4GDAT0

A3

DAT1A4

DAT2A5

DAT3B2

DAT4B3

DAT5B4

DAT6B5

DAT7B6

CLKM6

CMDM5

RFU_1A6

RFU_2A7

NC_21C5

RFU_3E5

RFU_4E8

RFU_5E9

RFU_6E10

RFU_7F10

RFU_8G3

RFU_9G10

RFU_10H5

RFU_11J5

RFU_12K6

RFU_13K7

RFU_14K10

RFU_15P7

RFU_16P10

RST_NK5

VCCQ_1C6

VCCQ_2M4

VCCQ_3N4

VCCQ_4P3

VCCQ_5P5

VCC_1E6

VCC_2F5

VCC_3J10

VCC_4K9

VDDIC2

VSS_1E7

VSS_2G5

VSS_3H10

VSS_4K8

VSSQ_1C4

VSSQ_2N2

VSSQ_3N5

VSSQ_4P4

VSSQ_5P6

NC_1A1

NC_2A2

NC_3A8

NC_4A9

NC_5A10

NC_6A11

NC_7A12

NC_8A13

NC_9A14

NC_10B1

NC_11B7

NC_12B8

NC_13B9

NC_14B10

NC_15B11

NC_16B12

NC_17B13

NC_18B14

NC_19C1

NC_20C3

NC_22C7

NC_23C8

NC_24C9

NC_25C10

NC_26C11

NC_27C12

NC_28C13

NC_29C14

NC_30D1

NC_31D2

NC_32D3

NC_33D4

NC_34D12

NC_35D13

NC_36D14

NC_37E1

NC_38E2

NC_39E3

NC_40E12

NC_41E13

NC_42E14

NC_43F1

NC_44F2

NC_45F3

NC_46F12

NC_47F13

NC_48F14

NC_49G1

NC_50G2

NC_51G12

NC_52G13

NC_53G14

NC_54H1

NC_55H2

NC_56H3

NC_57H12

NC_58H13

NC_59H14

NC_60J1

NC_61J2

NC_62J3

NC_63J12

NC_64J13

NC_65J14

NC_66K1

NC_67K2

NC_68K3

NC_69K12

NC_70K13

NC_71K14

NC_72L1

NC_73L2

NC_74L3

NC_75L12

NC_76L13

NC_77L14

NC_78M1

NC_79M2

NC_80M3

NC_81M7

NC_82M8

NC_83M9

NC_84M10

NC_85M11

NC_86M12

NC_87M13

NC_88M14

NC_89N1

NC_90N3

NC_91N6

NC_92N7

NC_93N8

NC_94N9

NC_95N10

NC_96N11

NC_97N12

NC_98N13

NC_99N14

NC_100P1

NC_101P2

NC_102P8

NC_103P9

NC_104P11

NC_105P12

NC_106P13

NC_107P14

IC8100-*10MTFC4GMCDM-1M WT

DEV_EMMC4.5_MICRON_4GDAT0

A3

DAT1A4

DAT2A5

DAT3B2

DAT4B3

DAT5B4

DAT6B5

DAT7B6

CLKM6

CMDM5

RFU_1A6

RFU_2A7

NC_21C5

RFU_3E5

RFU_4E8

RFU_5E9

RFU_6E10

RFU_7F10

RFU_8G3

RFU_9G10

RFU_10H5

RFU_11J5

RFU_12K6

RFU_13K7

RFU_14K10

RFU_15P7

RFU_16P10

RST_NK5

VCCQ_1C6

VCCQ_2M4

VCCQ_3N4

VCCQ_4P3

VCCQ_5P5

VCC_1E6

VCC_2F5

VCC_3J10

VCC_4K9

VDDIC2

VSS_1E7

VSS_2G5

VSS_3H10

VSS_4K8

VSSQ_1C4

VSSQ_2N2

VSSQ_3N5

VSSQ_4P4

VSSQ_5P6

NC_1A1

NC_2A2

NC_3A8

NC_4A9

NC_5A10

NC_6A11

NC_7A12

NC_8A13

NC_9A14

NC_10B1

NC_11B7

NC_12B8

NC_13B9

NC_14B10

NC_15B11

NC_16B12

NC_17B13

NC_18B14

NC_19C1

NC_20C3

NC_22C7

NC_23C8

NC_24C9

NC_25C10

NC_26C11

NC_27C12

NC_28C13

NC_29C14

NC_30D1

NC_31D2

NC_32D3

NC_33D4

NC_34D12

NC_35D13

NC_36D14

NC_37E1

NC_38E2

NC_39E3

NC_40E12

NC_41E13

NC_42E14

NC_43F1

NC_44F2

NC_45F3

NC_46F12

NC_47F13

NC_48F14

NC_49G1

NC_50G2

NC_51G12

NC_52G13

NC_53G14

NC_54H1

NC_55H2

NC_56H3

NC_57H12

NC_58H13

NC_59H14

NC_60J1

NC_61J2

NC_62J3

NC_63J12

NC_64J13

NC_65J14

NC_66K1

NC_67K2

NC_68K3

NC_69K12

NC_70K13

NC_71K14

NC_72L1

NC_73L2

NC_74L3

NC_75L12

NC_76L13

NC_77L14

NC_78M1

NC_79M2

NC_80M3

NC_81M7

NC_82M8

NC_83M9

NC_84M10

NC_85M11

NC_86M12

NC_87M13

NC_88M14

NC_89N1

NC_90N3

NC_91N6

NC_92N7

NC_93N8

NC_94N9

NC_95N10

NC_96N11

NC_97N12

NC_98N13

NC_99N14

NC_100P1

NC_101P2

NC_102P8

NC_103P9

NC_104P11

NC_105P12

NC_106P13

NC_107P14

IC8100-*12H26M31003GMR

DEV_EMMC4.5_SKHynix_4G

DAT0A3

DAT1A4

DAT2A5

DAT3B2

DAT4B3

DAT5B4

DAT6B5

DAT7B6

CLKM6

CMDM5

RFU_1A6

RFU_2A7

NC_21C5

RFU_3E5

RFU_4E8

RFU_5E9

RFU_6E10

RFU_7F10

RFU_8G3

RFU_9G10

RFU_10H5

RFU_11J5

RFU_12K6

RFU_13K7

RFU_14K10

RFU_15P7

RFU_16P10

RST_NK5

VCCQ_1C6

VCCQ_2M4

VCCQ_3N4

VCCQ_4P3

VCCQ_5P5

VCC_1E6

VCC_2F5

VCC_3J10

VCC_4K9

VDDIC2

VSS_1E7

VSS_2G5

VSS_3H10

VSS_4K8

VSSQ_1C4

VSSQ_2N2

VSSQ_3N5

VSSQ_4P4

VSSQ_5P6

NC_1A1

NC_2A2

NC_3A8

NC_4A9

NC_5A10

NC_6A11

NC_7A12

NC_8A13

NC_9A14

NC_10B1

NC_11B7

NC_12B8

NC_13B9

NC_14B10

NC_15B11

NC_16B12

NC_17B13

NC_18B14

NC_19C1

NC_20C3

NC_22C7

NC_23C8

NC_24C9

NC_25C10

NC_26C11

NC_27C12

NC_28C13

NC_29C14

NC_30D1

NC_31D2

NC_32D3

NC_33D4

NC_34D12

NC_35D13

NC_36D14

NC_37E1

NC_38E2

NC_39E3

NC_40E12

NC_41E13

NC_42E14

NC_43F1

NC_44F2

NC_45F3

NC_46F12

NC_47F13

NC_48F14

NC_49G1

NC_50G2

NC_51G12

NC_52G13

NC_53G14

NC_54H1

NC_55H2

NC_56H3

NC_57H12

NC_58H13

NC_59H14

NC_60J1

NC_61J2

NC_62J3

NC_63J12

NC_64J13

NC_65J14

NC_66K1

NC_67K2

NC_68K3

NC_69K12

NC_70K13

NC_71K14

NC_72L1

NC_73L2

NC_74L3

NC_75L12

NC_76L13

NC_77L14

NC_78M1

NC_79M2

NC_80M3

NC_81M7

NC_82M8

NC_83M9

NC_84M10

NC_85M11

NC_86M12

NC_87M13

NC_88M14

NC_89N1

NC_90N3

NC_91N6

NC_92N7

NC_93N8

NC_94N9

NC_95N10

NC_96N11

NC_97N12

NC_98N13

NC_99N14

NC_100P1

NC_101P2

NC_102P8

NC_103P9

NC_104P11

NC_105P12

NC_106P13

NC_107P14

11.09.29

81

eMMC

Don’t Connect Power At VDDI

EMMC DATA LINE10K PULL/UP FOR M13

EMMC DATA LINE 47K PULL/UP

(Just Interal LDO Capacitor)

eMMC I/F

eMMC serial 100 ohm option

EMMC 4.5Ver

Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATESSPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.FIRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFACTURES SPECIFIED PARTS BE USED FORTHE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

+24V_AMP

C545010uF35V

OPT

Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATESSPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.FIRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFACTURES SPECIFIED PARTS BE USED FORTHE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

MT5398_TS_OUT[1]

CI_ADDR[5]

EMMC_DATA[6]

MT5398_TS_OUT[6]

CI_ADDR[4]

FE_DEMOD1_TS_DATA[1]

MT5398_TS_OUT[4]

CI_ADDR[12]

EMMC_DATA[3]

CI_DATA[1]

FE_DEMOD1_TS_DATA[6]

MT5398_TS_OUT[3]

CI_DATA[5]

EMMC_DATA[4]

FE_DEMOD1_TS_DATA[0]

CI_ADDR[6]

CI_ADDR[11]

MT5398_TS_OUT[2]

CI_ADDR[10]

CI_DATA[2]

MT5398_TS_OUT[7]

CI_ADDR[14]

CI_ADDR[9]

MT5398_TS_OUT[0]

FE_DEMOD1_TS_DATA[3]

EMMC_DATA[5]

CI_ADDR[13]

EMMC_DATA[2]

FE_DEMOD1_TS_DATA[5]

CI_DATA[3]

CI_DATA[6]

CI_DATA[0]

CI_ADDR[7]

CI_DATA[7]

CI_ADDR[8]

CI_ADDR[1]

EMMC_DATA[7]

FE_DEMOD1_TS_DATA[4]

CI_ADDR[2]

FE_DEMOD1_TS_DATA[7]

MT5398_TS_OUT[5]

CI_ADDR[0-14]

FE_DEMOD1_TS_DATA[2]

CI_DATA[4]

CI_ADDR[0]

CI_ADDR[3]

R111 33

EMMC_RST

SMARTCARD_RST/SD_EMMC_DATA[2]

M_RFModule_RESET

AVDD_33SB

SMARTCARD_RST/SD_EMMC_DATA[2]

+3.3V_NORMAL

OPCTRL7

R18910KOPT

I2C_SCL4

R134 33

MT5398_XTAL_OUT

MT5398_MIVAL_ERRSTB_SDA

OPCTRL_11_SCL

R107

4.7K

MTK_HD

OPCTRL_10_SDA

/USB_OCD1

MODEL_OPT_5

I2C_SCL5

R1834.7K

MT5398_XTAL_OUT

R109 33

R128

4.7K

MODULE_V12

R1844.7K

EMMC_CMD

OSCL0

I2C_SCL6

R18510K

EMMC_DATA[0]

R1774.7KOPT

R1422.7K

NON_TU_Q_SG

HP_DET

MODEL_OPT_6

EMMC_CLK

/USB_OCD3

R1322.7K

R135 33

C1124.7uF10V

/PCM_OE

R104

4.7K

NON_FRC_60Hz

R112 33

AMP_RESET_SOC

R123

4.7K

Country_AJJA

R117 33

/S2_RESET

SMARTCARD_PWR_SEL/SD_EMMC_DATA[1]

I2C_SDA6

AVDD_33SB+3.3V_NORMAL

/PCM_REG

STB_SCL

OPC_EN

R1874.7KOPT

MT5398_TS_IN[5]

I2C_SDA_MICOM

R1601KOPT

OPCTRL_1_SCL

+3.3V_NORMALR149

4.7K

OPT

SC_DET

R178 22

CI_ADDR[0-14]

EMMC_CLK

SMARTCARD_DET/SD_EMMC_DATA[3]

I2C_SDA5

R140

4.7K

MTK_DVB_T2_TUNER

L/DIM0_SCLK

R1744.7KOPT

SMARTCARD_DET/SD_EMMC_DATA[3]

I2C_SDA5

OSCL0

R108

4.7K

MTK_FHD

SOC_RX

R1472.7K

NON_TU_Q_SG

SMARTCARD_VCC/SD_EMMC_CMD

OSDA1

R193 4.7K

R146

4.7K

MTK_SMALL

OPCTRL3

R1731K

PWM1_PULL_DOWN_1K

R1241.2K

R182

33

OSDA1

AV1_CVBS_DET

R100

4.7KOPT

R136

4.7K

MTK_NON_CP_BOX

USB_CTL3 MODEL_OPT_0

PWM_DIM1

OSDA0

SOC_RESET

+3.3V_NORMAL

USB_CTL1

LED_PWM0

R137

4.7K

MTK_CP_BOX

C1074.7uF10V

SMARTCARD_DATA/SD_EMMC_CLK

I2C_SDA4

+3.3V_NORMAL

EMMC_DATA[1]

MODEL_OPT_6

OPCTRL_0_SDA

MODEL_OPT_0

R106

4.7K

FRC_120Hz

OSCL2

R170 10K

/PCM_CE1

MODEL_OPT_5

EMMC_DATA[2-7]

/PCM_WE

R179 PWM_DIM2

22

C1170.1uF16V

R1884.7K

R119 33

SMARTCARD_PWR_SEL/SD_EMMC_DATA[1]

R113 33

R169 10K

NON_EU

PWM_DIM2

R186

22

OSDA0

/PCM_IRQA

CI_A_VS1

R16810K

C1090.1uF

C1110.1uF

CTS

IC100AT24C256C-SSHL-T

NVRAM_ATMEL

3A2

2A1

4GND

1A0

5SDA

6SCL

7WP

8VCC

MODEL_OPT_7

R143

4.7K

MTK_NON_DVB_S_TUNER

R1522.7K

NON_TU_Q_KR

+3.3V_NORMAL

MT5398_TS_IN[2]

R1512.7K

R1412.7K

R1631K

MT5398_MCLKI

OPCTRL_10_SDA

MT5398_TS_CLK

MODEL_OPT_3

MODEL_OPT_8

RTS

R1502.7K

SMARTCARD_VCC/SD_EMMC_CMD

FE_DEMOD1_TS_DATA[0-7]

MODEL_OPT_7

MODEL_OPT_3

R1551K

R110 33

MT5398_TS_VAL

OPCTRL3

AVDD_33SB

STB_SCL

OPCTRL_0_SDA

R139

4.7K

MTK_NON_DVB_T2_TUNER

SC_ID_SOC

/PCM_IOWR

SMARTCARD_CLK/SD_EMMC_DATA[0]

R101

4.7K

SMARTCARD_DATA/SD_EMMC_CLK

R1611KOPT

/PCM_WAIT

OSCL1

R115 33

OSCL1

R122

4.7K

Non_Country_AJJA

R114 33

MT5398_XTAL_IN

R1382.7K

MODEL_OPT_10COMP1_DET

R130

4.7K

MODULE_V13

OSDA2

MT5398_TS_IN[7]

R1561K

R1761K

PWM2_PULL_DOWN_1K

/TU_RESET1

MT5398_TS_IN[1]

LED_PWM1

R116 33

OPCTRL_1_SCL

AMP_RESET_N

IC100-*1M24256-BRMN6TP

NVRAM_ST

3E2

2E1

4VSS

1E0

5SDA

6SCL

7WC

8VCC

SOC_TXL/DIM0_MOSI

RF_SWITCH_CTL

/CI_CD2

STB_SDA

MODEL_OPT_2

MT5398_TS_IN[3]

R105

4.7K

Country_TW

R1541K

OPT

MODEL_OPT_1

L/DIM0_VS

MT5398_TS_IN[0]

LED_PWM0

/S2_RESET

FE_DEMOD1_TS_CLK

/CI_CD1

+3.3V_NORMAL

R144

4.7K

MTK_LARGE

CI_DATA[0-7]

R102

4.7KOPT

FE_DEMOD1_TS_VAL

R103

4.7K

NON_Country_TW

MT5398_TS_IN[6]

/PCM_IORD

R129

4.7K

MTK_DDR_1.5GB

AMP_RESET_SOC

/USB_OCD2

I2C_SCL5

R145

4.7K

MTK_DVB_S_TUNER

R1532.7K

NON_TU_Q_KR

MT5398_MISTRT

R1211.2K

R158

22

OPCTRL_11_SCL

MT5398_TS_IN[4]

MODEL_OPT_9

M_REMOTE_RX

SMARTCARD_CLK/SD_EMMC_DATA[0]

C1100.1uF

I2C_SCL1

+3.3V_NORMAL

I2C_SCL_MICOMMT5398_TS_SYNC

WOL/ETH_POWER_ON

M_REMOTE_TX

I2C_SDA1

MT5398_TS_OUT[0-7]

R1621K

R118 33

OPCTRL7

R148

4.7K

MT5398_XTAL_IN

FE_DEMOD1_TS_SYNC

R1332.7K

PCM_RST

R131

4.7K

MTK_DDR_1.25GB

R120 33

R1571KOPT

VDD3V3

LED_PWM1

R190

10K

D100

100V

1N4148W

OTP_WRITE

R180

4.7K

+3.3V_NORMAL

OTP_WRITE

VDD3V3

R194

10K

R195

10K

Q100PMV48XP

G

D S

C115-*12.7pF50V

EAX6561020X_2.7pF

C114-*12.7pF50V

EAX6561020X_2.7pF

#SIL_RESET

R153-*1

1.5KTU_Q_KR

R152-*1

1.5KTU_Q_KR

C1141.0pF50V

EAX6561090X_1pFC1151.0pF50V

EAX6561090X_1pF

X10027MHz

4GND_2

1X-TAL_1

2GND_1

3X-TAL_2

/RST_HUB

/RST_HUB

CAM_SLIDE_DET

CAM_SLIDE_DET

R196240

IC105LGE2122[A2_M13]

JTCKAK10

JTDIAK11

JTDOAL9

JTMSAJ11

JTRSTAJ12

OSDA0AH11

OSCL0AH10

OSDA1AF11

OSCL1AG11

XTALIAN29

XTALOAM29

AVDD33_XTAL_STBAN30

AVSS33_XTAL_STBAL29

AVDD33_VGA_STBAN17

AVSS33_AVSS33_VGA_STBAL17

AVDD33_PLLAL26

AVSS33_PLLGPAC21

AVSS33_CPUPLLH21

AVDD10_LDOAM17

AVDD10_ELDOAN16

U0TXAH15

U0RXAH14

U1TXAH13

U1RXAG13

POWED24

POOEB25

POCE1D25

POCE0A25

PDD7C22

PDD6B22

PDD5A22

PDD4C23

PDD3A23

PDD2B23

PDD1D23

PDD0C24

PARBC25

PACLEA26

PAALEB26

EMMC_CLKC21

OPWRSBAL15

ORESETAK20

OIRIAF17

FSRC_WRC20

STB_SCLAL14

STB_SDAAK15

POR_BNDAE14

IC105LGE2122[A2_M13]

GPIO0B30

GPIO1A31

GPIO2B31

GPIO3A32

GPIO4C30

GPIO5A33

GPIO6B32

GPIO7C31

GPIO8E30

GPIO9F29

GPIO10F27

GPIO11F28

GPIO12C32

GPIO13F30

GPIO14F32

GPIO15D30

GPIO16D32

GPIO17F31

GPIO18F33

GPIO19E31

GPIO20E32

GPIO21D31

GPIO22D33

GPIO23E29

GPIO24C33

GPIO25B33

GPIO26A30

GPIO27E28

GPIO28C29

GPIO29J28

GPIO30H29

GPIO31J26

GPIO32G30

GPIO33G27

GPIO34E27

GPIO35D29

GPIO36D28

GPIO37H28

GPIO38J27

GPIO39G29

GPIO40G31

GPIO41G28

GPIO42B28

GPIO43K28

GPIO44E25

GPIO45D21

GPIO46G23

GPIO47C28

GPIO48F24

GPIO49AB8

GPIO50AA7

GPIO51AD6

GPIO52AC8

GPIO53AC7

GPIO54AB6

GPIO55AC6

ADIN0_SRVAJ23

ADIN1_SRVAH23

ADIN2_SRVAE28

ADIN3_SRVAD28

ADIN4_SRVAF22

ADIN5_SRVAK21

ADIN6_SRVAG24

ADIN7_SRVAM18

DEMOD_RSTP30

DEMOD_TSCLKN32

DEMOD_TSDATA0R27

DEMOD_TSDATA1T26

DEMOD_TSDATA2T27

DEMOD_TSDATA3P26

DEMOD_TSDATA4R28

DEMOD_TSDATA5U27

DEMOD_TSDATA6U26

DEMOD_TSDATA7R26

DEMOD_TSSYNCR29

DEMOD_TSVALP27

CI_INTL25

CI_TSCLKN33

CI_TSDATA0K26

CI_TSSYNCN30

CI_TSVALN31

PVR_TSCLKM31

PVR_TSVALM27

PVR_TSSYNCL27

PVR_TSDATA0M29

PVR_TSDATA1M30

SPI_CLK1L30

SPI_CLKL33

SPI_DATAL32

SPI_CLEK27

OPWM2AL8

OPWM1AM8

OPWM0AM9

SD_D0D27

SD_D1C27

SD_D2D26

SD_D3C26

SD_CMDA28

SD_CLKE24

LED_PWM1AF15

LED_PWM0AG15

OPCTRL11AL16

OPCTRL10AM16

OPCTRL9AE17

OPCTRL8AG19

OPCTRL7AH17

OPCTRL6AE19

OPCTRL5AH19

OPCTRL4AK16

OPCTRL3AG17

OPCTRL2AJ17

OPCTRL1AF19

OPCTRL0AJ19

R152-*2

1.2KTU_N_TW/BR

R153-*2

1.2KTU_N_TW/BR

R147-*1

1.5KTU_Q_SG

R142-*1

1.5KTU_Q_SG

C114-*23.3pF50V

EAX6558850X_3.3pF

C115-*23.3pF50V

EAX6558850X_3.3pF

508

MID_MAIN_1 2013.07.16

HDCP EEPROM

CI SLOT -> SOC

MODEL_OPT_4

I2C

NON_DDR_0.78G

GPIO45(EMMC_RST) is dedicated to resetEMMC for improving A1’s leakage current

X-TAL

DDR_1.25G

MODEL_OPT_4

Support

CI SLOT -> SOC

NVRAM

HD

Write Protection

- Low : Normal Operation- High : Write Protection

Not Support

CP BOX

CI SLOT -> SOC

SOC -> CI SLOT

OPT

MODEL_OPT_2

Disable

Non_AJJA

Module

EPI

Close to eMMC Flash(IC8100)

Enable

MODEL_OPT_8

MODEL_OPT_9

Model Option

EXTERNAL DEMOD-> SOC

AJJA

T2 Tuner

MODEL_OPT_5 DDR_1.5G

MODEL_OPT_7

Not Support

MODEL_OPT_6

DDR

Wake On Lan

Default

STRAPPING LED_PWM0 LED_PWM1 OPCTRL3 OPCTRL7

ICE mode + 27M + serial boot 1 0 0 0

ICE mode + 27M + ROM to Nand boot 1 0 0 1

ICE mode + 27M + ROM to 60bit ECC Nand boot 1 0 1 0

ICE mode + 27M + ROM to eMMC boot from 1 0 1 1 EMMC pins (share pins w/s NAND)

ICE mode + 27M + ROM to eMMC 1 1 0 0Boot from SDIO pins

Support

SOC -> CI SLOT

FHD

MODEL_OPT_3

DDR

MODEL_OPT_10

CI SLOT -> SOC

S Tuner

5V Tolerance

I2C_1 : AMP, L/DIMMING,HDCP KEYI2C_2 : T-CON,I2C_3 : MICOMI2C_4 : S/Demod,T2/Demod, LNB, MHL(Sil1292)I2C_5 : NVRAMI2C_6 : TUNER_MOPLL(T/C,ATV)

MODEL_OPT_1

Non_TWMODEL_OPT_0

No FRC(60Hz)

LOWHIGH

FRC(120Hz)

Country_TW

FRC

V12V13

Panel

Country_AJJA

DDR_0.78G

MODEL_OPT_5

MODEL_OPT_9

DDR_1.25G DDR_1.5G DDR_0.768G

High

Low

Low

Low

High

High

TW

MODEL_OPT_4

M13 PCB P/NOEAX64797001* : LD33BEAX64872101* : LA33B

M13 EAX64872104 BASE14y Smart TV

NC4.5 PCB P/NONON CI : EAX65610201CI :

M13 vs Lean Smartdel. I2C_SCL2/SDA2cause of EPI block deletion

I2C_SCL2/SDA2

M13 vs Lean SmartOption Name change

M13 vs Lean SmartOption Name changeSupport to OptNot Support to Deafult

M13 vs Lean Smartdel. EPI_LOCK6cause of EPI block deletion

EPI_LOCK6

FE_LNA_Ctrl1/2

M13 vs Lean Smartdel. FE_LNA_Ctrl1/2cause of Tuner change 13y to 14y

Deleted

Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATESSPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.FIRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFACTURES SPECIFIED PARTS BE USED FORTHE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

MT5398_TS_OUT[5]

CI_DATA[7]

CI_ADDR[13]

CI_ADDR[14]

MT5398_TS_OUT[1]

CI_ADDR[2]

CI_DATA[4]

CI_ADDR[10]

CI_ADDR[8]

MT5398_TS_OUT[2]

CI_ADDR[6]

CI_ADDR[7]

MT5398_TS_OUT[3]

CI_DATA[6]

CI_ADDR[5]

CI_DATA[3]

MT5398_TS_OUT[4]

CI_ADDR[12]

MT5398_TS_OUT[0]

CI_ADDR[3]

CI_DATA[5]

CI_DATA[1]

CI_DATA[2]

CI_ADDR[9]

MT5398_TS_OUT[6]

CI_ADDR[1]

CI_DATA[0]

CI_ADDR[0]

CI_ADDR[4]

CI_ADDR[11]

MT5398_TS_OUT[7]

TP308

C38627pF50VOPT

TXA2P

COMP1_Y/AV1_CVBS_SOC

TXD1P

USB_DP3

SC_CVBS_IN_SOC

MODEL_OPT_9

TP304

TP335

C360 0.047uF

MODEL_OPT_10

C3410.047uF

TU_S/N/Q_T/US/KR/TW

SCART_Lout_SOC

C3751500pF

TP354

USB_DM2

MT5398_TS_IN[4]

TP360

TP374

C377

1200pFHP_OUT

C37810pF50V

TXD2P

SCART_Rout_SOC

VDD3V3

+1.2V_MTK_AVDD

TP376

TXCCLKN

TP378

R3701.2K

HP_OUT

TU_CVBS

AVDD3V3_AADC

TXC1P

C3020.1uF

C36510uF10V

TXC3N

COMP1_Pr_SOC

TXDCLKN

C3631uF10V

C3030.1uF

TXC4P

C39227pF50VOPT

TXD1N

WIFI_DP

HP_LOUT_AMP

SCART_Rout_SOC

D2+_HDMI3_JACK

TXD4P

C3550.047uF

TU_S/N/Q_T/US/KR/TW

TXC2N

TP347

TXD4N

TP333

TXA1P

DDC_SDA_1_SOC

C350

0.1uF

TP367

R3511.2KHP_OUT

R3392.2KTU_HK

/CI_CD1

C39127pF50VOPT

MT5398_MISTRT

TP373

TP312

SC_COM_SOC

TP357

R329470KOPT

EPHY_RDN

+1.2V_MTK_AVDD

R371 100

D0-_HDMI1_SOC

TP310

COMP1_Y/AV1_CVBS_SOC

TP338

MT5398_TS_IN[1]

COMP1_Pb_SOC

D0+_HDMI1_SOC

TXDCLKP

CK+_HDMI1_SOC

C3280.1uF

PCM_5V_CTL

TP340

HP_LOUT

WIFI_DM

OSDA2

C352 0.01uF

TU_HK

C3040.1uF

TP336

SC_L_IN_SOC

D1-_HDMI1_SOC

AUD_MASTER_CLK

TP331

EPHY_TDP

/PCM_REG

C3740.01uF

COMP1_COM_SOC

COMP1_Y/AV1_CVBS

C3510.1uF

COMP1/AV1/DVI_R_IN

D1-_HDMI3_JACK

TP369

/PCM_OE

TXA3P

R35375

1%

C39633pF

OPT

TP311

TXD0P

AVDD3V3_AADC

/PCM_WE

COMP1/AV1/DVI_R_IN_SOC

TP318

TXD2N

TP363

COMP1_Pr_SOC

/PCM_WAIT

TP330

R340 100

TU_HK

C342100pF50V

USB_DM1

TXB3N

SC_L_IN_SOC

C336 1uF10V

TU_S/N/Q_T/US/KR/TW

TP349

TP370

R3311K

TU_S/N/Q_T/US/KR/TW

TP313

TXC0N

TP323

TXD3P

TP383

COMP1/AV1/DVI_L_IN_SOC

VDD3V3

SC_G_SOC

C3820.1uF

R309100K

TP326

TP328

TP368TP303

TXC1N

TXA1N

+5V_NORMAL

TXB3P

TP342

TXB4P

R307 1K

SC_R_SOC

R335 51

TU_S/N/Q_T/US/KR/TW

HP_ROUT_AMP

CI_ADDR[0-14]

TP305

C3640.1uF

/PCM_IORD

MT5398_TS_OUT[0-7]

TP309

CI_A_VS1

TXD3N

TP322

COMP1/AV1/DVI_L_IN_SOC

SC_FB_SOC

D1+_HDMI1_SOC

TP346

R341 100

SC_R_IN_SOC

R3691.2KHP_OUT

5V_HDMI_3_JACK

TP316

R3810

1/16W

TP379

MODEL_OPT_2

TP320

C3320.22uF10V

HP_OUT

C39427pF50VOPT

CK-_HDMI1_SOC

MODEL_OPT_8

MT5398_MCLKI

C310

33pFTU_S/N/Q_T/US/KR/TW

D2+_HDMI1_SOC

TXC0P

C3051uF10V

IF_N

SC_DET

TXB0P

TP343

HDMI_HPD_1_SOC

TXB1P

TP375

R328

470K

OPT

DDC_SCL_3_JACK

COMP1/AV1/DVI_L_IN R3740

DDC_SDA_3_JACK

R366 100

CK-_HDMI3_JACK

TP372

C38527pF50VOPT

MT5398_TS_IN[6]

TXA0N

VDD3V3

TP352

AUD_SCK

AVDD_33SB

TXA2N

TP353

C38722pF

OPT

USB_DM3

C3951200pF

HP_OUT

C38827pF50VOPT

USB_DP1

C3540.1uF

R34324K

1%

AUD_LRCK

R35475

1%

VDD3V3

ARC

R30382

AVDD3V3_AADC

C311 1uF

10V

TP365

TP371

TXCCLKP

TP356

PCM_5V_CTL

TXA0P

TXC3P

HP_ROUT

2D/3D_CTL

TP324TXBCLKP

C3720.01uF

D1+_HDMI3_JACK

C338560pF50V

OPT

TP355

AUD_LRCH

R3820

WIFI

+1.2V_MTK_AVDD

TXA3N

VDD3V3

R3730

TP300

C312

33pF

TU_S/N/Q_T/US/KR/TW

TXACLKN

R342 10KTU_S/N/Q_T/US/KR/TW

L304

MT5398_TS_VAL

TP364

TP359

5V_HDMI_1_SOC

TP344

TP319

TP382

TXACLKP

COMP1_Pb

ARC

R368 100

/PCM_IRQA

R31524K

TP348

COMP1_Pb_SOC

TXB1N

TP345

TP301

SCART_Lout_SOC

TXC2P

R306 1K

R332 10KTU_S/N/Q_T/US/KR/TW

MT5398_MIVAL_ERR

TP307

TXD0N

CK+_HDMI3_JACK

TP358

VDD3V3

C39322pFOPT

CI_DATA[0-7]

TXBCLKN

TP334

TP306

C38410pF50V

C3060.1uF

TXB2N

SPDIF_OUT

SC_B_SOC

R334 51

TU_S/N/Q_T/US/KR/TW

C3730.01uF

R383

0

WIFI

TP361

C3620.1uF

D0-_HDMI3_JACK

TXB2P

SC_R_IN_SOC

TP329

HP_ROUT_MAIN

R367 100

EPHY_TDN

TP321

TP315

R3461K

TU_S/N/Q_T/US/KR/TW

HDMI_ARC

C3901200pFHP_OUT

TP380

USB_CTL2

MT5398_TS_IN[2]

HP_LOUT_MAIN

SC_G_SOC

R344

30K

C3580.1uF

C3831200pFHP_OUT

C38922pF

OPT

L303BLM18PG121SN1D

HP_OUT

DTV/MNT_V_OUT_SOC

R302180

SC_B_SOC

TP366

/PCM_IOWR

TP332

MT5398_TS_IN[5]

IF_P

C3070.1uF

R3081.2KOPT

R345

30K

DDC_SCL_1_SOC

TP337

MT5398_TS_IN[7]

D2-_HDMI3_JACK

C361 1uF

IF_AGC

TP317

TP325

+1.2V_MTK_AVDD

COMP1_COM_SOC

SC_CVBS_IN_SOC

SC_ID_SOC

C3310.22uF10V

HP_OUT

MT5398_TS_IN[3]

C337 1uF

10VTU_S/N/Q_T/US/KR/TW

TP377

C3470.1uF

TP362MT5398_TS_CLK

R305 1K

C37910pF50V

USB_DP2

L302BLM18PG121SN1D

HP_OUT

TUNER_SIF

DTV/MNT_V_OUT_SOC

SC_FB_SOC

C359 0.047uF

TU_HK

SC_COM_SOC

TXA4P

C343100pF50V

TXB4N

TXB0N

/PCM_CE1

EPHY_RDP

TP327

R3720

R3521.2K

HP_OUT

TP351

SC_R_SOC

C3710.01uF

COMP1_Y/AV1_CVBS_SOC

HDMI_HPD_3_JACK

PCM_RST

TP339

TXA4N

/CI_CD2

/TU_RESET2

TXC4N

MT5398_TS_IN[0]

TP314

COMP1_Pr

TP341

TP302

D2-_HDMI1_SOC

TP381

MT5398_TS_SYNC

TP350

C339560pF50V

OPT

D0+_HDMI3_JACK

OSCL2

COMP1/AV1/DVI_R_IN_SOC

VDD3V3_HDMI

C34510uF16V

C34610uF16V

R380

1K

TU_S/N/Q_T/US/KR/TW

DDC_SDA_MHL

5VBUS

HDMI_HPD_4_MHL

DDC_SCL_MHL

D0-_HDMI4_MHL

D0+_HDMI4_MHL

D2-_HDMI4_MHL

D1+_HDMI4_MHL

D2+_HDMI4_MHL

CK-_HDMI4_MHL

D1-_HDMI4_MHL

CK+_HDMI4_MHL

MODEL_OPT_1

R35010

EU

R36151

R36251

R36351

R36451

IC105LGE2122[A2_M13]

HDMI_CECV26

HDMI_0_SCLAC27

HDMI_1_SCLAB27

HDMI_2_SCLAA26

HDMI_3_SCLW27

HDMI_0_SDAAC26

HDMI_1_SDAAB26

HDMI_2_SDAY26

HDMI_3_SDAW26

HDMI_0_PWR5VAE29

HDMI_1_PWR5VY27

HDMI_2_PWR5VAA28

HDMI_3_PWR5VV28

HDMI_0_HPDAD29

HDMI_1_HPDAA27

HDMI_2_HPDAA29

HDMI_3_HPDV29

AVDD12_HDMI_0_RXAA33

AVDD12_HDMI_1_RXAA32

AVDD12_HDMI_2_RXP33

AVDD12_HDMI_3_RXP32

AVDD33_HDMIAH33

AVSS33_HDMI_RX_1AE27

AVSS33_HDMI_RX_2T25

AVSS33_HDMI_RX_3W25

AVSS33_HDMI_RX_4AD27

HDMI_0_RX_0AG30

HDMI_0_RX_0BAG31

HDMI_0_RX_1AF30

HDMI_0_RX_1BAF31

HDMI_0_RX_2AE32

HDMI_0_RX_2BAE33

HDMI_0_RX_CAG32

HDMI_0_RX_CBAG33

HDMI_1_RX_0AD30

HDMI_1_RX_0BAD31

HDMI_1_RX_1AC32

HDMI_1_RX_1BAC33

HDMI_1_RX_2AC30

HDMI_1_RX_2BAC31

HDMI_1_RX_CAE30

HDMI_1_RX_CBAE31

HDMI_2_RX_0Y30

HDMI_2_RX_0BY31

HDMI_2_RX_1W32

HDMI_2_RX_1BW33

HDMI_2_RX_2W30

HDMI_2_RX_2BW31

HDMI_2_RX_CAA30

HDMI_2_RX_CBAA31

HDMI_3_RX_0U30

HDMI_3_RX_0BU31

HDMI_3_RX_1T32

HDMI_3_RX_1BT33

HDMI_3_RX_2T30

HDMI_3_RX_2BT31

HDMI_3_RX_CV30

HDMI_3_RX_CBV31

IC105LGE2122[A2_M13]

USB_DP_P0H32

USB_DM_P0H33

USB_DP_P1J32

USB_DM_P1J31

USB_DP_P2K32

USB_DM_P2K31

USB_DP_P3AN10

USB_DM_P3AM10

AVDD33_USB_P0P1P2K33

AVDD33_USB_P3AN8

AVSS33_USB_P1M25

AVSS33_USB_P3AE11

TXVP_0AL13

TXVN_0AM13

RXVP_1AL12

RXVN_1AM12

PHYLED1AF13

PHYLED0AJ13

REXTAN12

AVDD33_ETHAN14

AVSS33_ELDOAE13

AVSS33_LDAC16

AVSS33_COMAC15

IC105LGE2122[A2_M13]

TCON0AA8

TCON1AA9

TCON2W6

TCON3U6

TCON4U7

TCON5V8

TCON6V6

TCON7AB7

TCON8W9

TCON9U8

TCON10U9

TCON11V9

TCON12V7

AVDD12_LVDS_1AN1

AVDD12_LVDS_2AN2

AVDD12_LVDS_3AN3

AVDD33_LVDSAN4

AVSS12_LVDS_1AM4

AVSS12_LVDS_2AM3

AVSS12_LVDS_3AF5

AVSS33_LVDS_1AE5

AVSS33_LVDS_2AC5

AVSS33_LVDS_3V5

REXT_VPLLT1

BE0PY1

BE0NY2

BE1PW3

BE1NW4

BE2PV3

BE2NV4

BECKPV1

BECKNV2

BE3PU3

BE3NU4

BE4PT3

BE4NT4

BO0PAD1

BO0NAD2

BO1PAC3

BO1NAC4

BO2PAB3

BO2NAB4

BOCKPAB1

BOCKNAB2

BO3PAA3

BO3NAA4

BO4PY3

BO4NY4

AE0PAH1

AE0NAH2

AE1PAG3

AE1NAG4

AE2PAF3

AE2NAF4

AECKPAF1

AECKNAF2

AE3PAE3

AE3NAE4

AE4PAD3

AE4NAD4

AO0PAM1

AO0NAM2

AO1PAL3

AO1NAL4

AO2PAK3

AO2NAK4

AOCKPAK1

AOCKNAK2

AO3PAJ3

AO3NAJ4

AO4PAH3

AO4NAH4

IC105LGE2122[A2_M13]

AIN1_R_AADCAL32

AIN1_L_AADCAN32

AIN2_R_AADCAM33

AIN2_L_AADCAM31

AIN3_R_AADCAM32

AIN3_L_AADCAK33

AIN4_R_AADCAL33

AIN4_L_AADCAN33

AVDD33_AADCAJ32

AVSS33_AADCAC24

VMID_AADCAN31

MPXPAH25

AR0_ADACAK30

AL0_ADACAJ29

AR1_ADACAJ31

AL1_ADACAK29

AR2_ADACAJ30

AL2_ADACAH28

AVDD33_ADACAJ33

AVSS33_ADACAC23

ALINAG9

ASPDIF0AG10

ASPDIF1V27

AOBCKAK9

AOLRCKAJ9

AOMCLKAF10

AOSDATA4AH9

AOSDATA3AK8

AOSDATA2AJ8

AOSDATA1AH8

AOSDATA0AJ10

IC105LGE2122[A2_M13]

ADCINP_DEMODAM27

ADCINN_DEMODAN27

AVDD33_DEMODAN26

AVDD12_DEMODAN28

AVSS33_DEMODAL28

AVSS12_DEMODAL27

IF_AGCL26

RF_AGCM28

LOUTNAJ27

LOUTPAK27

OSCL2N27

OSDA2N26

CVBS3PAK26

CVBS2PAM25

CVBS1PAH26

CVBS0PAK25

CVBS_COMAJ26

AVDD33_CVBSAM26

AVSS33_CVBS_1AB20

AVSS33_CVBS_2AB22

HSYNCAK18

VSYNCAL18

RPAL20

GPAM20

BPAL19

COMAN20

SOGAK19

VGA_SDAAG22

VGA_SCLAH22

COM1AL21

PB1PAK22

PR1PAL22

Y1PAM21

SOY1AN21

COM0AM23

PB0PAL23

PR0PAL24

Y0PAN23

SOY0AK23

VDACX_OUTAH24

VDACY_OUTAJ24

AVDD33_VIDEOAN25

AVDD12_RGBAN18

AVSS33_VDAC_BGAC19

AVSS12_RGBAK17

AVSS33_VDACAE20

ZD306

ADLC 5S 02 015

ZD302

ADLC 5S 02 015

ZD304

ADLC 5S 02 015

C3995pF50VWIFI

C3985pF50VWIFI

R35575

1/4W

1%

3216

509

MID_MAIN_2 2013.07.16

Ready For commercial Audio_L_OUT

1608 sizs For EMI

FOR EMI

Close to JACK

1608 sizs For EMI

1608 sizs For EMI 1.0Vpp

Close to Main Chip

Place at JACK SIDE

1608 sizs For EMI

For PCB Pattern

For PCB Pattern

1608 sizs For EMI

Close to Tuner

HDMI_CEC

Close to MT5369

Close to MT5369

PC_R_IN_SOC

For PCB Pattern

PC_L_IN_SOC

Close to Tuner

Near the SOC

Port was changed !!!!

Close to AVDD33_ADAC & AVDD33_AADC

For PCB Pattern

Wake On Lan

Don’t use as GPIO

Ready For commercial Audio_R_OUT

PLACE AT JACK SIDE

M13 vs Lean Smartdel. list(cause of EPI Block deletion)GCLK_SOCMCLK_SOCGST_SOCEO_SOCVCOM_DYNPMIC_RESET

GCLK_SOCMCLK_SOCGST_SOCEO_SOCVCOM_DYNPMIC_RESET

Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

THERMALTHERMAL

THERMAL

THERMAL

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATESSPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.FIRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFACTURES SPECIFIED PARTS BE USED FORTHE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

+5V_NORMAL

L2409BLM18PG121SN1D

C243010uF16V

C24130.1uF

50V

OPT

+12V

C2450

0.01uF50V

POWER_ON/OFF2_3

C24060.1uF16V

+24V

C241810uF10V

R240310K

IC2401

NCP803SN293

P_DET_BOTH_12_3.5V_OnSemi

1

GND

3VCC 2 RESET

+1.5V_DDR

+3.5V_ST

POWER_ON/OFF2_3

C2424150pF50V

R2452

2K

1/8W

PANEL DISCHARGE RESISTOR

C2404

0.1uF16V

C24530.1uF16V

C2420

0.1uF16V

R2408

10K

POWER_ON/OFF2_1

POWER_ON/OFF2_2

R2419100

R2455

47K

1%

PANEL_VCC

C245410uF10V

+3.5V_ST

+3.3V_NORMAL

C24110.1uF16V

C24354.7uF

50V

PWM_DIM1

R2432330K1/16W 5%

+24V

R24102.7K1%

P_DET_ONLY_12V

PWM_DIM2

C244710uF10V

C2455

0.1uF

16V

POWER_ON/OFF1

R243851K

1%

R24111.5K1%

P_DET_BOTH_24_3.5V

R245310K

C24100.1uF50V

P_DET_BOTH_12_3.5V

C245110uF10V

C24290.1uF16V

L24074.7uH

C240810uF10V

C24330.1uF50V

C24430.1uF50V

C240710uF10V

L2406

BLM18PG121SN1D

RL_ON

C24010.1uF50V

C24030.1uF16VOPT

Q2401

MMBT3906(NXP)

1

2

3

C24120.1uF16V

L2408

BLM18SG121TN1D

R2416100K

P_DET_BOTH_12_3.5V

R243115K

1/16W 5%

+3.5V_ST

C24401uF25VOPT

+24V

C244210uF10V

R2418100

P_DET_BOTH_12_3.5V

R2451

2K

1/8W

PANEL DISCHARGE RESISTOR

C243810uF10V

PANEL_CTL

+3.5V_ST

PANEL_VCC

R2406

10K

1%

C244810uF10V

R24091.2K1%

P_DET_ONLY_12V

R2417100K

L2400BLM18PG121SN1D

R242110KOPT

+12V

L2405BLM18PG121SN1D

C243110uF16V

C243910uF10V

Q2406MMBT3904(NXP)

E

B

C

C24220.1uF50V

C244147pF50VOPT

R24026.8K

POWER_ON/OFF2_2

C2436

0.1uF16V

+12V

C240210uF16V

+3.5V_ST

C24190.1uF16V

+1.2V_MTK_CORE

R240110K

L24042uH

C240010uF16V

R2436

16K

1%

R243356K1/16W1%

C24320.01uF

50V

C24340.1uF16VOPT

C242810uF10V

C241410uF10V

R2430

10K

R243710K

R2427

30K

1%C2444

10uF10V

C245610uF10V

R2428

10K

1%

POWER_DET

R24128.2K

P_DET_BOTH_24_3.5V

C240910uF10V

R243910K

R24540

1/16W5%

OPT

VDD3V3_HDMI

C24270.1uF

16V

+3.3V_NORMAL

POWER_ON/OFF2_4

D2401

40V

B540C

C24230.01uF50V

+12V

C24214700pF

50V

IC2402

NCP803SN293

P_DET_OnSemi

1

GND

3VCC 2 RESET

R241410K

POWER_ON/OFF1

+12V

C24570.1uF16V

R241305%

P_DET_BOTH_24_3.5V

C2452100pF50V

POWER_ON/OFF2_1

R2404

5.1K

1%

R24000

P_DET_BOTH_12_3.5V

+3.5V_ST

+3.3V_NORMAL

R2425100 INV_CTL

R24261K

L24112.2uH

NR5040T2R2N IC2403TPS54319TRE

1VIN_1

3GND_1

7COMP

9 SS/TR

10 PH_1

11 PH_2

12 PH_3

13

BOOT

14

PWRGD

15

EN

16

VIN_3

5AGND

8RT/CLK

6VSENSE

4GND_2

2VIN_2 17

EP[GND]

C241710uF35V

IC2404RT8289GSP

3NC_2

2NC_1

4FB

1BOOT

5EN

6GND

7VIN

8SW

9

[EP]GND

IC2400BD86106EFJ

3AGND

2VIN

4FB

1PGND

5COMP

6EN

7SW_1

8SW_2

9

[EP]

C24050.0068uF

50V

ZD2400

5V

ZENER_3.3V_NORMAL

JP2408

JP2409

JP2410

JP2411

L24102uH

NR8040T2R0N

IC2405TPS54327DDAR

3VREG5

2VFB

4SS

1EN

5GND

6SW

7VBST

8VIN

9

[EP]GND

C2445100pF50VOPT

C24151uF10V

C24163300pF50V

C24370.1uF

16V

C242522uF10V

125CC242622uF10V

125C

L/DIM0_VS_PWR

L/DIM0_SCLK_PWR

L/DIM0_MOSI_PWR

L/DIM0_VS

L/DIM0_SCLK

L/DIM0_MOSI

R245633

L/DIM_OUT

R2457

4.7K

L/DIM_OUT

R245833

L/DIM_OUT

R245933

L/DIM_OUT

L/DIM0_MOSI_PWR

L/DIM0_VS_PWR

L/DIM0_SCLK_PWR

R2410-*12.7K1%

P_DET_BOTH_12_3.5V

R2409-*11.2K1%

P_DET_BOTH_12_3.5V

IC2401-*1

NCP803SN293

P_DET_BOTH_24_3.5V_OnSemi

1

GND

3VCC 2 RESET

R2416-*1100K

P_DET_BOTH_24_3.5V

R2418-*1100

P_DET_BOTH_24_3.5V

R2410-*22.7K1%

P_DET_BOTH_12_24V

R2409-*21.2K1%

P_DET_BOTH_12_24V

R2412-*18.2K

P_DET_BOTH_12_24V

R2411-*11.5K1%P_DET_BOTH_12_24V R2416-*2

100K

P_DET_BOTH_12_24V

IC2401-*2

NCP803SN293

P_DET_BOTH_12_24V_OnSemi

1

GND

3VCC 2 RESET

R2418-*2100

P_DET_BOTH_12_24V

C2410-*10.1uF50V

P_DET_BOTH_24_3.5V

C2410-*20.1uF50V

P_DET_BOTH_12_24V

R2442

33K

R2441

5.6K

R2440

3.3K

1/16W

1%

Q2408NTR4501NT1G

G

DS

L2401UBW2012-121F

L2402UBW2012-121F

L2403UBW2012-121F

IC2402-*1

APX803D29

P_DET_DIODES

1

GND

3VCC 2 RESET

IC2401-*3

APX803D29

P_DET_BOTH_24_3.5V_DIODES

1

GND

3VCC 2 RESET

IC2401-*4

APX803D29

P_DET_BOTH_12_24V_DIODES

1

GND

3VCC 2 RESET

IC2401-*5

APX803D29

P_DET_BOTH_12_3.5V_DIODES

1

GND

3VCC 2 RESET

ZD2401

2.5V

OPT

ZD2402

2.5V

OPT

ZD24035V

Q2407DMP2130L

G

DS

P2401

SMAW200-H18S5

DEV_POWER_WAFER_18PIN

14 12V

924V

4 PDIM#1

18 GND

1312V

8 PDIM#2

33.5V

17GND

12 GND

7GND

2 INV ON

16 NC

11GND

6 3.5V

1PWR ON

1512V

10 24V

53.5V

19

.

P2400SMAW200-H24S5

DEV_POWER_WAFER_24PIN

19GND

14

9

4

18

13

8

3

17

12

7

2

16

11

6

1

20 GND

15

10

5

21GND 22 L/DIMO_VS

23L/DIM0_MOSI 24 L/DIM0_SCLK

25

C245810uF35V

24

MID_POWER 2011.11.25

HDMI LEAKAGE Workaround in MTK A2(A0) (Default= with HDMI_LEAKAGE)

R1

R1

3A

DDR MAIN 1.5V

12V-->3.58V

R2

Vout=1.222*(1+R1/R2)

R2

Vout=0.8*(1+R1/R2)

+5V_Normal

ST_3.5V-->3.5V

DDR MAIN 1.5V

Vout=0.827*(1+R1/R2)=1.521V

5A

R1

R2

R16A

PANEL_POWERTYP 1450mA

FROM LPB & PSU

Placed on SMD-TOP

24V-->3.48V

MAX 3.4 A

not to RESET at 8kV ESD

Power_DET

R2

+3.3V_NORMAL

3A

Vout=0.765*(1+R1/R2)

Placed on SMD-TOP

On-semi

M13 vs 14y Smart TVApply New Wafer (P2401-1*1)Change Pin Assign(P2401)

Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATESSPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.FIRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFACTURES SPECIFIED PARTS BE USED FORTHE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

2013.02.05

MICOM (RENESAS) 530

NetCast4.0

WOL/WIFI_POWER_ON

POWER_ON/OFF1

R3005

10K

MICOM_LCD/OLED

R3004

10K

MICOM_NC4_8KEY

I2C_SDA_MICOM

MODEL1_OPT_5

RUE003N02Q3001

HDMI_CEC_FET_ROHM

SD

G

+3.5V_ST

R3030

10K

R3014

10K

MICOM_DEBUG

+3.5V_ST

WOL_CTL

C3003

8pF

P300012507WS-04L

MICOM_DEBUG

1

2

3

4

5

SCART_MUTE

CAM_CTL

KEY1

MODEL1_OPT_5

CEC_REMOTER3012

10K

MICOM_NON_LOGO_LIGHT

POWER_ON/OFF2_4

C3001

0.47uF

SOC_TX

MODEL1_OPT_3

R3013

10K

MICOM_LOGO_LIGHT

R3008

10K

MICOM_TACT_KEY

EDID_WP

CAM_PWR_ON_CMD

LOGO_LIGHT

MODEL1_OPT_1

RL_ON

MODEL1_OPT_2

R3007-*2

22K

MICOM_OLED_FRC

SOC_RX

POWER_DET

R3007-*1

56K

MICOM_OLED_MAIN

R3001

10K

MICOM_M13

MHL_DET

MICOM_RESET

CAM_CTL

MODEL1_OPT_4

R3031

270K

OPT

R3010

10K

MICOM_TOUCH_KEY

R3021

10K

EDID_WP

LED_R

MODEL1_OPT_2

C30040.1uF16V

R3028

4.7MOPT

POWER_ON/OFF2_4

LED_R

R3007

10K

MICOM_PDP

POWER_ON/OFF2_1

LOGO_LIGHT

MICOM_DEBUG

I2C_SCL_MICOM

R3032

10K

R303327K

HDMI_CEC

MODEL1_OPT_1

X3000

32.768KHz

C3002

8pF

+3.5V_ST

PANEL_CTL

MODEL1_OPT_3

MHL_DET

C30000.1uF

POWER_ON/OFF2_2

AMP_MUTE

R3034

120K

KEY2

CAM_PWR_ON_CMD

IR

SCART_MUTE

D3000

BAT54_SUZHO

POWER_ON/OFF2_3

SI1012CR-T1-GE3Q3001-*1

HDMI_CEC_FET_VISHAYSD

G

SW3000JTP-1127WEM

MICOM_RESET_SW

12

4 3

R3002

10K

MICOM_GED

MODEL1_OPT_0

MICOM_DEBUG

MODEL1_OPT_4

R3029

22

MICOM_RESET_22OHM

INV_CTL

+3.5V_ST

SOC_RESET

MODEL1_OPT_0

MICOM_RESET

R3016

1K

+3.5V_ST

GND

SIDE_HP_MUTE

R3003

10K

MICOM_H13

HDMI_CEC

R3000

10K

MICOM_NON_GED

R3006

10K

MICOM_NC4.5_5KEY

R3029-*1 33MICOM_RESET_33OHM

ST_BY_DET_CAMST_BY_DET_CAM

+3.5V_ST

WOL/ETH_POWER_ON

IC3000

R5F100GEAFB

MICOM_LEAD_Au

1P60/SCLA0

2P61/SDAA0

3P62

4P63

5P31/TI03/TO03/INTP4

6P75/KR5/INTP9/SCK01/SCL01

7P74/KR4/INTP8/SI01/SDA01

8P73/KR3/SO01

9P72/KR2/SO21

10P71/KR1/SI21/SDA21

11P70/KR0/SCK21/SCL21

12P30/INTP3/RTC1HZ/SCK11/SCL11

13

P50/INTP1/SI11/SDA11

14

P51/INTP2/SO11

15

P17/TI02/TO02

16

P16/TI01/TO01/INTP5

17

P15/PCLBUZ1/SCK20/SCL20

18

P14/RXD2/SI20/SDA20

19

P13/TXD2/SO20

20

P12/SO00/TXD0/TOOLTXD

21

P11/SI00/RXD0/TOOLRXD/SDA00

22

P10/SCK00/SCL00

23

P146

24

P147/ANI18

25 P27/ANI726 P26/ANI627 P25/ANI528 P24/ANI429 P23/ANI330 P22/ANI231 P21/ANI1/AVREFM32 P20/ANI0/AVREFP33 P13034 P01/TO00/RXD135 P00/TI00/TXD136 P140/PCLBUZ0/INTP6

37

P120/ANI19

38

P41/TI07/TO07

39

P40/TOOL0

40

RESET

41

P124/XT2/EXCLKS

42

P123/XT1

43

P137/INTP0

44

P122/X2/EXCLK

45

P121/X1

46

REGC

47

VSS

48

VDD

IC3000-*1

R5F100GEAFB#30

MICOM_LEAD_Cu

1P60/SCLA0

2P61/SDAA0

3P62

4P63

5P31/TI03/TO03/INTP4

6P75/KR5/INTP9/SCK01/SCL01

7P74/KR4/INTP8/SI01/SDA01

8P73/KR3/SO01

9P72/KR2/SO21

10P71/KR1/SI21/SDA21

11P70/KR0/SCK21/SCL21

12P30/INTP3/RTC1HZ/SCK11/SCL11

13

P50/INTP1/SI11/SDA11

14

P51/INTP2/SO11

15

P17/TI02/TO02

16

P16/TI01/TO01/INTP5

17

P15/PCLBUZ1/SCK20/SCL20

18

P14/RXD2/SI20/SDA20

19

P13/TXD2/SO20

20

P12/SO00/TXD0/TOOLTXD

21

P11/SI00/RXD0/TOOLRXD/SDA00

22

P10/SCK00/SCL00

23

P146

24

P147/ANI18

25 P27/ANI726 P26/ANI627 P25/ANI528 P24/ANI429 P23/ANI330 P22/ANI231 P21/ANI1/AVREFM32 P20/ANI0/AVREFP33 P13034 P01/TO00/RXD135 P00/TI00/TXD136 P140/PCLBUZ0/INTP6

37

P120/ANI19

38

P41/TI07/TO07

39

P40/TOOL0

40

RESET

41

P124/XT2/EXCLKS

42

P123/XT1

43

P137/INTP0

44

P122/X2/EXCLK

45

P121/X1

46

REGC

47

VSS

48

VDD

EYE_SCL

EYE_SDA

R3035

3.3K

EYE_Q

R3036

3.3K

EYE_Q

+3.5V_ST

R3011

HDMI_EXT_EDID

10K

For CEC

HDMI_WAUP:HDMI_INIT

NON_GED

For Debug

Commercial

POWER_ON/OFF2_4

LCD / OLED

MICOM MODEL OPTION

Ready for sample set

PDP

0

H13

TACT_KEY

IR_wafer(12/15)

GP4 High/MID Power SEQUENCE

Ready for sample set

1

POWER_ON/OFF2_3

MODEL_OPT_3

M13MODEL_OPT_4

Renesas MICOM

POWER_ON/OFF!

MODEL_OPT_2

MODEL_OPT_0 For LOGO LIGHT

Need to Assign ADC port

MODEL_OPT_5

LOGO

SOC_RESET

POWER_ON/OFF2_2

GED

IR_wafer(10pin)

MODEL_OPT_1

Don’t remove R3014,not making float P40

MICOM MODEL OPTION

Ready For

NON LOGO

POWER_ON/OFF2_1

TOUCH_KEY

Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

THERMAL

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATESSPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.FIRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFACTURES SPECIFIED PARTS BE USED FORTHE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

L3303BLM18PG121SN1D

+5V_NORMAL

D0-_HDMI4_JACK

DDC_SCL_4_JACK

I2C_SDA4

DDC_SDA_MHL

R33064.7KHDMI_INTERNAL_EDID

MHL_DET

CK-_HDMI4_JACK

R3301100K

D2+_HDMI4_MHL

C33110.1uF16V

Q3300MMBT3904(NXP)

E

B

C

5V_MHL

IC3300

M24C02-RMN6T

HDMI_EXT_EDID

3E2

2E1

4VSS

1E0

5SDA

6SCL

7WC

8VCC

R337510K

D1+_HDMI4_JACK

D0-_HDMI4_MHL

D0-_HDMI3_JACK

D1+_HDMI4_JACK

R3345

4.7K

OPT

D1-_HDMI4_JACK

+5V_NORMAL

R33364.7K

DDC_SCL_3_JACK

CK-_HDMI4_MHL

C33210.1uF16V

DDC_SDA_3_JACK

C33130.1uF16VCK-_HDMI4_JACK

D2-_HDMI3_JACK

R3355

4.7K

OPT

D1-_HDMI4_JACK

DDC_SCL_3_JACK

R334047K

5V_MHL

CK+_HDMI3_JACK

#MHL_OCP

C33200.1uF16V

R3309 100

D1-_HDMI3_JACK

DDC_SDA_1_SOC

1.2V_MHL

R3363

10K

MHL_DET

D0+_HDMI3_JACK

1.2V_MHL

CK+_HDMI4_JACK

R3303 100

R3356

10K

R33301K

R336210K

DDC_SCL_1_SOC

CK+_HDMI4_MHL

R3329 100

CEC_REMOTE

1.2V_MHL

EDID_WP

R33311K

HDMI_HPD_3_JACK

D0+_HDMI4_JACK

D2+_HDMI1_SOC

DDC_SCL_MHL

C33180.1uF16V

D2+_HDMI3_JACK

D0-_HDMI4_JACK

D1+_HDMI4_MHL

R335710K

D0+_HDMI1_SOC

I2C_SCL4

5V_MHL

SIL_HPD/CBUS

HDMI_ARC

R3351

4.7K OPT

5V_MHL

D1-_HDMI4_MHL

DDC_SDA_3_JACKHDMI_DET

Q3303MMBT3904(NXP)

E

B

C

CK-_HDMI1_SOC

D1+_HDMI1_SOC

R332022

HDMI_EXT_EDID

+3.5V_ST

D2-_HDMI4_JACK

TP3300

R333947K

5V_MHL

5V_HDMI_3_JACK

CK+_HDMI4_JACK

5V_HDMI_1_SOC

CEC_REMOTE

DDC_SCL_1_SOC

L3301BLM18PG121SN1D

D0+_HDMI4_MHL

CK+_HDMI1_SOC

R3327100K

1.2V_MHL

R3374

10K

D2-_HDMI4_JACK

DDC_SDA_1_SOC

D2-_HDMI4_MHL

D1-_HDMI1_SOC

IC3304

SIL1292CNUC

3RSVDL22VDD12_1

4RESET

1RSVDL1

6INT5PWR5V_DET

7DSDA

8DSCL

9CBUS/HPD

10VDD5_IN

11

RSVDNC

12

VREG33_OUT

13

PS_CTRL

14

HDMI_DET

15

GPIO1/CI2CA

16

GPIO0

17

CSDA

18

CSCL

19

CEC_A

20

VDD12_2

21 HPD_IN22 TX2+23 TX2-24 TX1+25 TX1-26 TX0+27 TX0-28 TXC+29 TXC-30 AVDD12

31

VDD33_1

32

RXC-

33

RXC+

34

RX0-

35

RX0+

36

RX1-

37

RX1+

38

RX2-

39

RX2+

40

VDD33_2

41

[EP]GND

5VBUS

D3301

MMBD6100A2

C

A1

R3302 100

+5V_NORMAL

CK-_HDMI3_JACK

DDC_SDA_MHL

DDC_SCL_4_JACK

R332547K

HDMI_EXT_EDID

R3328 100

+3.5V_ST

R333747K

DDC_SDA_MHL

D2+_HDMI4_JACK

D0+_HDMI4_JACK

Q3302MMBT3906(NXP) E

B

C

#SIL_RESET

HDMI_DET

R331922

HDMI_EXT_EDID

R33041K

D1+_HDMI3_JACK

Q3310

MMBT3904(NXP)

E

B

C

HDMI_HPD_4_MHL

CEC_REMOTE

DDC_SCL_MHL

D2+_HDMI4_JACK

R3308 100

SIL_HPD/CBUS

HDMI_HPD_1_SOC

MHL_DET

VDD3V3_HDMI

Q3301

MMBT3904(NXP) E

B

C

D0-_HDMI1_SOC

R33731K

1/16W5%

C33160.1uF16V

D2-_HDMI1_SOC

C33140.1uF16V

OPT

R33051K

Q3313MMBT3904(NXP)

HDMI_EXT_EDIDE

B

C

R33214.7KHDMI_EXT_EDID

R3371

820

Q3304

2N7002K

OPT

S

D

G

R332347K

HDMI_EXT_EDID

R336147K

D3300MMBD6100

HDMI_EXT_EDID

A2

C

A1

5V_HDMI_1_SOC

R3376

0

R334810K

R3358

4.7KOPT

DDC_SCL_1_SOC

DDC_SDA_1_SOC

R3377

47K

HDMI_INTERNAL_EDID

R3378

47K

HDMI_INTERNAL_EDID

Q3309PMV48XP

G

DS

MHL_DETQ3311MMBT3904(NXP)

E

B

C R3307

1.8K

DDC_SDA_MHL

R3379

22K

5V_MHL

DDC_SCL_MHL

R33801.8K

R338122K

D3314

MMBD6100A2

C

A1

C33020.1uF16V

JK3300

51U019S-312HFN-E-R-B-LG

EAG62611204

FREEPORT

14

NC

13

CE_REMOTE

5D1_GND

20

BODY_SHIELD

12

CK-

11

CK_GND

2D2_GND

19

HP_DET

18

5V

10CK+

4D1+

1D2+

17

GND

9D0-

8D0_GND

3D2-

16

DDC_DATA

7D0+

6D1-

15

DDC_CLK

JK3303

51U019S-312HFN-E-R-B-LG

EAG62611204

FREEPORT

14

ARC

13

CE_REMOTE

5D1_GND

20

BODY_SHIELDGND

12

CK-

11

CK_GND

2D2_GND

19

HP_DET

18

5V

10CK+

4D1+

1D2+

17

GND

9D0-

8D0_GND

3D2-

16

DDC_DATA

7D0+

6D1-

15

DDC_CLK

JK3301

51U019S-312HFN-E-R-B-LG

EAG62611204

FREEPORT

14

NC

13

CE_REMOTE

5D1_GND

20

BODY_SHIELD

GND

12

CK-

11

CK_GND

2D2_GND

19

HP_DET

18

5V

10CK+

4D1+

1D2+

17

GND

9D0-

8D0_GND

3D2-

16

DDC_DATA

7D0+

6D1-

15

DDC_CLK

+12V

R3386

180K

R3387

120K

R33701K

+12V

R33841K

OPT

C33220.1uF16VOPT

D3304BAT54_SUZHO

30V

VDD3V3_HDMI

VDD3V3_HDMI

VDD3V3_HDMI

5V_MHL

R333810K

D3312

30V

BAT54_SUZHO

D3313

30V

BAT54_SUZHO

R3388

5.1

R3389

5.1

Q3314PMBFJ177 G

D

S

JK3303-*1

DAADR019A

FOOSUNG

14RESERVED

13CEC

5TMDS_DATA1_SHIELD

20

BODY_SHIELD

12TMDS_CLK-

11TMDS_CLK_SHIELD

2TMDS_DATA2_SHIELD

19HOT_PLUG_DETECT

18VDD[+5V]

10TMDS_CLK+

4TMDS_DATA1+

1TMDS_DATA2+

17DDC/CEC_GND

9TMDS_DATA0-

8TMDS_DATA0_SHIELD

3TMDS_DATA2-

16SDA

7TMDS_DATA0+

6TMDS_DATA1-

15SCL

JK3300-*1

DAADR019A

FOOSUNG

14RESERVED

13CEC

5TMDS_DATA1_SHIELD

20

BODY_SHIELD

12TMDS_CLK-

11TMDS_CLK_SHIELD

2TMDS_DATA2_SHIELD

19HOT_PLUG_DETECT

18VDD[+5V]

10TMDS_CLK+

4TMDS_DATA1+

1TMDS_DATA2+

17DDC/CEC_GND

9TMDS_DATA0-

8TMDS_DATA0_SHIELD

3TMDS_DATA2-

16SDA

7TMDS_DATA0+

6TMDS_DATA1-

15SCL

JK3301-*1

DAADR019A

FOOSUNG

14RESERVED

13CEC

5TMDS_DATA1_SHIELD

20

BODY_SHIELD

12TMDS_CLK-

11TMDS_CLK_SHIELD

2TMDS_DATA2_SHIELD

19HOT_PLUG_DETECT

18VDD[+5V]

10TMDS_CLK+

4TMDS_DATA1+

1TMDS_DATA2+

17DDC/CEC_GND

9TMDS_DATA0-

8TMDS_DATA0_SHIELD

3TMDS_DATA2-

16SDA

7TMDS_DATA0+

6TMDS_DATA1-

15SCL

5V_MHL

R3332

10K

MHL_DET

5VBUS

C33150.1uF16V

C3312

10uF10V

#MHL_OCP

IC3301TPS2051BDBVR

3OC

2GND

4EN

1OUT

5IN

R3359

100K

ZD5015VOPT

VDD3V3_HDMI

Demod_Core

L3302BLM18PG121SN1D

TU_DEMOD_CORE

VA3312

ADUC 20S 02 010L

CEC_REMOTE

D3303

IP4294CZ10-TBR

1

8

2

7

3

6

4 5

910

D3320IP4294CZ10-TBR

1

8

2

7

3

6

4

5

9

10

D3318IP4294CZ10-TBR

1

8

2

7

3

6

4

5

9

10

D3321IP4294CZ10-TBR

1

8

2

7

3

6

4

5

9

10

D3302

IP4294CZ10-TBR

1

8

2

7

3

6

4 5

910

D3319IP4294CZ10-TBR

1

8

2

7

3

6

4

5

9

10

R3390

10K

HDMI_EXT_EDID

D3322

30V

VA3304ADUC 20S 02 010L

VA3305

ADUC 20S 02 010L

VA3306

ADUC 20S 02 010L

VA3307

ADUC 20S 02 010L

VA3311

ADUC 20S 02 010L

VA3310ADUC 20S 02 010L

VA3308

ADUC 20S 02 010L

VA3309

ADUC 20S 02 010L

VA3302

ADUC 20S 02 010L

VA3303

ADUC 20S 02 010L

VA3300

ADUC 20S 02 010L

VA3301

ADUC 20S 02 010L

VA3313

ADUC 20S 02 010L

533

HDMI 4 2013.07.16

SIDE

SIDE

(CD_SENCE)

UI : HDMI3

UI : HDMI1

SIDE

UI : HDMI2

Close to SIL1292

Improve EMI(Apply the Mold B/C Model)

Current Limit

Field IssueLatch Up(+3.3V_NORMAL -> VDD3V3)

CHANGE NET Demod_Core

HDMI_EXT_EDID

Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATESSPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.FIRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFACTURES SPECIFIED PARTS BE USED FORTHE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

R3706

10K

HP_LOUT

HP_ROUT

+3.3V_NORMAL

HP_DET

JK3700

PEJ034-01

6BT_TERMINAL2

7BB_TERMINAL2

5T_SPRING

4R_SPRING

3E_SPRING

R37051K

ZD3703

20VADUC 20S 02 010L

OPT

R3720

100

RS232C_US

R3721

100

RS232C_US

C37100.1uF

RS232C_US

C37130.1uF

RS232C_US

C37090.1uF

RS232C_US

+3.5V_ST

SOC_TX

ZD3702ADUC 20S 02 010L 20V

OPT

C37080.1uF

RS232C_US

IC3700

MAX3232CDR

EAN41348201

RS232C_US

3C1-

2V+

4C2+

1C1+

6V-

5C2-

7DOUT2

8RIN2

9ROUT2

10DIN2

11DIN1

12ROUT1

13RIN1

14DOUT1

15GND

16VCC

C37110.1uF

RS232C_US

SOC_RX

537

14Y Phone Jack 2013.08.27

RS-232C Control INTERFACE(NORTH AMERICA)

Closed to Jack

Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

USB DOWN STREAM

USB DOWN STREAM

THERMAL

THERMAL

USB DOWN STREAM

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATESSPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.FIRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFACTURES SPECIFIED PARTS BE USED FORTHE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

USB_CTL2

/USB_OCD2

/USB_OCD3

JK43023AU04S-305-ZC-(LG)

12

34

5

USB_DP3

USB_DP2

USB_DM2

USB_CTL3R4301

10K

+5V_USB_2

R4302

10K

JK43003AU04S-305-ZC-(LG)

12

34

5

C43020.1uF16V

+5V_USB_3

USB_DM3

+5V_NORMAL

+5V_USB_2

+3.3V_NORMAL

+5V_USB_3

C430110uF10V

C433710uF10V

C4322

10uF

10V

C4310

10uF

10V

IC4306TPS2066CDGNR

USB2/3_OCP_TI

3EN1

2IN

4EN2

1GND

5FLT2

6OUT2

7OUT1

8FLT1

9

[EP]GND

IC4306-*1DIODES TAIWAN INC

USB2/3_OCP_DIODES

3EN1

2IN

4EN2

1GND

5FLG2

6OUT2

7OUT1

8FLG1

9

[EP]GND

R43032.2

USB_Serial_2.2ohm

R43042.2

USB_Serial_2.2ohm

R43052.2

USB_Serial_2.2ohm

R43062.2

USB_Serial_2.2ohm

C45000.1uF16V

R450010KOPT

+5V_USB_1

R450110K

IC4500AP2171DM8G

3IN_2

2IN_1

4EN

1GND

5FLG

6OUT_1

7OUT_2

8NC

JK45003AU04S-305-ZC-(LG)

12

34

5

/USB_OCD1

USB_DP1

+5V_NORMAL

USB_CTL1

C4501

10uF

10V

USB_DM1

+5V_USB_1

C450210uF10V

+3.3V_NORMAL

R45022.2

USB_Serial_2.2ohm

R45032.2

USB_Serial_2.2ohm

R4502-*10

USB_Serial_0ohm

R4503-*10

USB_Serial_0ohm

R4303-*10

USB_Serial_0ohm

R4304-*10

USB_Serial_0ohm

R4306-*10

USB_Serial_0ohm

R4305-*10

USB_Serial_0ohm

543

USB2_USB3 2013.11.25

MAX 1.5AOCP USB2/3USB2

MAX 1.5AUSB3

OCP USB1USB1

MAX 1.5ADVR Ready

Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATESSPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.FIRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFACTURES SPECIFIED PARTS BE USED FORTHE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

D5001

5.5VLAN_ESD

EPHY_TDN

D5003

5.5VLAN_ESD

D5000

5.5VLAN_ESD

D5002

5.5VLAN_ESD

EPHY_TDP

EPHY_RDN

EPHY_RDP

C50000.1uF16V

C50010.01uF50V

JK5000

RJ45VT-01SN002

METAL_LAN_JACK

11

22

33

44

55

66

77

88

9

9

JK5000-*1

RV3-2032ADA3

MOLD_LAN_JACK

1TD+

2TCT

3TD-

4RD+

5RCT

6RD-

7R7

8GND

550

LAN_VERTICAL 2013.11.26

Ethernet Block

Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATESSPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.FIRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFACTURES SPECIFIED PARTS BE USED FORTHE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

IF_N

D_Demod_Core

FE_DEMOD1_TS_CLK

FE_DEMOD1_TS_DATA[7]

TU_GND_B

TU_GND_B

TU_GND_B

FE_DEMOD1_TS_DATA[2]

RF_SWITCH_CTL_TU

FE_DEMOD1_TS_DATA[5]

/TU_RESET1_TU

LNB_TX

C6401

1000pF

630V

TU_TW/CO/BR

I2C_SDA6_TU

IF_AGC_TU

+3.3V_TU

TU_GND_A

C64021000pF630V

TU_TW/CO/BR/KR/US

FE_DEMOD1_TS_SYNC

FE_DEMOD1_TS_DATA[3]

FE_DEMOD1_TS_DATA[6]

+3.3V_LNA_TU

I2C_SCL6_TU

I2C_SDA4_TU

TU_GND_A

TU_GND_A

TU_CVBS_TU

R6402

0TU_EU/AJ/JA

FE_DEMOD1_TS_DATA[4]

FE_DEMOD1_TS_ERROR

FE_DEMOD1_TS_DATA[1]

+3.3V_DEMOD_TU

TU_SIF_TU

TU_GND_B

FE_DEMOD1_TS_VAL

IF_P

R6401

0TU_EU/AJ/JA

FE_DEMOD1_TS_DATA[0]

I2C_SCL4_TU

TU_GND_A

TU6402-*3TDJM-G105D

DEV_TU_AJ_T2

1B1[+3.3V]

2NC_1

3AIF_AGC

4SCL_RF

5SDA_RF

6AIF[P]

7AIF[N]

8NC_2

9NC_3

10NC_4

11B2[+3.3V]

12ERROR

13GND_1

14MCLK

15SYNC

16VAILD

17D0

18D1

19D2

20D3

21D4

22D5

23D6

24D7

25RESET_DEMOD

26B3[+3.3V]

27SCL_DEMOD

28B4[+1.1V]

29F22_OUTPUT

30SDA_DEMOD

47

SHIELD

B1B1

A1A1

TDJH-G101D

TU6401-*1

DEV_TU_AJ_T

47

SHIELD

6IF[P]

7IF[N]

8NC_2

9NC_3

1B1[+3.3V]

2NC_1

3IF_AGC

4SCL

5SDA

A1A1

B1B1

TDJH-H101F

TU6401

DEV_TU_KR_US

47

SHIELD

6IF[P]

7IF[N]

8NC_2

9NC_3

1B1[+3.3V]

2NC_1

3IF_AGC

4SCL

5SDA

A1A1

B1B1

TU6402TDJM-H101F

DEV_TU_KR_PIP

1B1[+3.3V]

2NC_1

3M_DIF_AGC

4SCL_RF

5SDA_RF

6M_DIF[P]

7M_DIF[N]

8S_SIF

9S_CVBS

10NC_2

11B2[+3.3V]

12S_ERROR

13GND_1

14S_MCLK

15S_SYNC

16S_VALID

17S_DATA

18NC_3

19NC_4

20NC_5

21NC_6

22NC_7

23NC_8

24NC_9

25S_RESET_DEMOD

26B3[+3.3V]

27SCL_DEMOD

28B4[+1.1V]

29NC_10

30SDA_DEMOD

47

SHIELD

B1B1

A1A1

TU6402-*2TDJM-K101F

DEV_TU_CO_T2

1B1[+3.3V]

2RF_SW_CTL

3AIF_AGC

4SCL_RF

5SDA_RF

6AIF[P]

7AIF[N]

8NC_1

9NC_2

10NC_3

11NC_4

12ERROR

13GND_1

14MCLK

15SYNC

16VAILD

17D0

18D1

19D2

20D3

21D4

22D5

23D6

24D7

25RESET_DEMOD

26B2[+3.3V]

27SCL_DEMOD

28B3[+1.1V]

29NC_5

30SDA_DEMOD

47

SHIELD

B1B1

A1A1

TU6402-*1TDJM-B101F

DEV_TU_BR

1B1[+3.3V]

2RF_SW_CTL

3AIF_AGC

4SCL_RF

5SDA_RF

6AIF[P]

7AIF[N]

8NC_1

9NC_2

10NC_3

11NC_4

12ERROR

13GND_1

14MCLK

15SYNC

16VAILD

17D0

18D1

19D2

20D3

21D4

22D5

23D6

24D7

25RESET_DEMOD

26B2[+3.3V]

27SCL_DEMOD

28B3[+1.1V]

29NC_5

30SDA_DEMOD

47

SHIELD

B1B1

A1A1

TDJK-T101F

TU6403DEV_TU_TW

47

SHIELD

6IF[P]

7IF[N]

8NC_1

9NC_2

1B1[+3.3V]

2RF_S/W_CTL

3IF_AGC

4SCL

5SDA

A1A1

B1B1

TU6402-*4TDJM-C301D

DEV_TU_HK

1B1[+3.3V]

2RF_SW_CTL

3NC_1

4SCL_RF

5SDA_RF

6NC_2

7NC_3

8SIF

9CVBS

10NC_4

11NC_5

12ERROR

13GND_1

14MCLK

15SYNC

16VAILD

17D0

18D1

19D2

20D3

21D4

22D5

23D6

24D7

25RESET_DEMOD

26B2[+3.3V]

27SCL_DEMOD

28B3[+1.1V]

29NC_6

30SDA_DEMOD

47

SHIELD

B1B1

A1A1

564

TUNER 2013.07.16

12

16

15

7

5

10

19

13

25

28

11

21

23

27

4

2

29

24

17

26

20

14

8

3

9

6

22

Global flag

30

18

1

Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

THERMAL

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATESSPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.FIRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFACTURES SPECIFIED PARTS BE USED FORTHE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

FE_DEMOD1_TS_DATA[2]

FE_DEMOD1_TS_DATA[3]

FE_DEMOD1_TS_DATA[0]

FE_DEMOD1_TS_DATA[5]

FE_DEMOD1_TS_DATA[1]

FE_DEMOD1_TS_DATA[4]

FE_DEMOD1_TS_DATA[7]

FE_DEMOD1_TS_DATA[6]

/TU_RESET2

C652922uF10V85C

L6502BLM18PG121SN1D

/TU_RESET2_TU

+3.3V_NORMAL

C65260.1uF

16V

C65300.1uF16V

FE_DEMOD1_TS_ERROR

FE_DEMOD2_TS_DATA

R6502100

I2C_SDA6_TU

+3.3V_DEMOD_TU

+3.3V_TUNER

I2C_SCL4

R6506 100

TU_CVBS

R6517200

TU_HK

I2C_SCL6

R650310K

IF_N

FE_DEMOD1_TS_DATA[3]

TUNER_SIF

C65110.1uF

C65020.1uF16V

LNB_TX

R6501100

FE_DEMOD1_TS_DATA[4]

FE_DEMOD1_TS_DATA[5]

I2C_SDA6

FE_DEMOD1_TS_ERROR

R6513 0

TU_HK

C65040.1uF

/TU_RESET1_TU

LNB_OUT

FE_DEMOD1_TS_SYNC

+3.3V_LNA_TU

+3.3V_TUNER

TU_SIF_TU

FE_DEMOD1_TS_SYNC

D_Demod_Core

C650547pF50VOPT

C651218pF50V

OPT

FE_DEMOD1_TS_DATA[6]

FE_DEMOD1_TS_DATA[0]

FE_DEMOD1_TS_DATA[7]

FE_DEMOD2_TS_CLK

FE_DEMOD1_TS_DATA[1]

C650347pF50VOPT

C651318pF50V

OPT

FE_DEMOD2_TS_ERROR

C6507

0.1uF16V

C65100.1uF

FE_DEMOD2_TS_ERROR

IF_P

IF_AGC_TU

FE_DEMOD1_TS_DATA[0-7]

IF_N

R6507 1K

RF_SWITCH_CTL

/TU_RESET2

TU_CVBS_TU

I2C_SDA4_TU

FE_DEMOD1_TS_DATA[2]

+3.3V_TUNER

FE_DEMOD2_TS_CLK

FE_DEMOD1_TS_CLK

IF_P

I2C_SDA4

I2C_SCL6_TU

C65060.1uF

TU_DEMOD_CORE

IF_AGC

/TU_RESET2_TU

FE_DEMOD1_TS_VAL

FE_DEMOD2_TS_VAL

R6516200

TU_HK

FE_DEMOD2_TS_SYNCFE_DEMOD2_TS_SYNC

FE_DEMOD1_TS_CLK

/TU_RESET1

FE_DEMOD2_TS_DATA

L6505BLM18PG121SN1D

TU_DEMOD_CORE

LNB_TX

C65010.1uF

C6509

0.1uF16V

LNB_OUT

FE_DEMOD1_TS_VAL

Q6502MMBT3906(NXP)

TU_HK

E

B

C

I2C_SCL4_TU

FE_DEMOD1_TS_ERROR

RF_SWITCH_CTL_TU

+3.3V_TU

FE_DEMOD2_TS_VAL

+5V_NORMAL

R651810K

TU_DEMOD_CORE

IC6500AP2132MP-2.5TRG1

EAN61387601

TU_DEMOD_CORE

3

VIN

2

EN

4

VCTRL

1

PG

5

NC

6

VOUT

7

ADJ

8

GND

9

[EP]

C65151uF

TU_DEMOD_CORE

R652010K1% TU_1.2V

+3.3V_TUNER

0.1uFC6516

TU_DEMOD_CORE

R6519-*1

14K

TU_1.1V

Demod_Core

R652120K1%

TU_1.2V

C651810uF16V

TU_DEMOD_CORE

R6520-*1

2K

TU_1.1V

R6521-*1

18K

TU_1.1V

R651911K1%

TU_1.2V

Demod_Core

+3.3V_TUNER

+3.3V_TUNER

R6512

33

R6511

33

C65080.1uF

16V

+3.3V_NORMALIC6515

AZ1117BH-1.2TRE1

TU_NO_DEMOD_CORE

GND/ADJ

OUTIN

C651410uF10V

TU_NO_DEMOD_CORE

1.2V_MHL

C65190.1uF16VTU_NO_DEMOD_CORE

R6515

1

TU_NO_DEMOD_CORE

L6500BLM18PG121SN1D

L6501BLM18PG121SN1D

L6503BLM18PG121SN1D

R6510 33

R6509 33

565

TUNER_CIRCUIT 2013.07.16

mA(MAX)

13’ Tuner Type for Global TDS’S’-G501D : T/C Half NIM Horizontal TypeTDS’Q’-G501D : T/C/S2 Combo Horizontal typeTDS’Q’-G601D : T2/C/S2 Combo Horizontal TypeTDS’Q’-G651D : T2/C/S2 Combo Vertical TypeTDS’Q’-G705D : Singapore DVB-T2 (V1.3.1)TDS’M’-C601D : China NIM with Isolater TypeTDS’W’-J551F : Japan Dual NIMTDS’W’-B651F : Brazil 2TunerTDS’W’-A651F : Taiwan 2TunerTDS’W’-K651F : Colombia DVB-T2 2Tuner

Global F/E Option Name1. TU2. Tuner Name = TDS’S’,TDS’Q’...3. Country Name = T,T2,S2,KR,US,BR ...

Example of Option nameTU_Q_T2 = apply TDSQ type tuner and T2 country TU_M/W = apply TDSM&TDSW Type Tuner

6

17

3. Signal Width >= 12milsSignal to Signal Width = 12mils

1608 perallel because of derating

3

12

19

30

4

Ground Width >= 24mils

39

14

2

21

15

8

16

2. No via on both of them

close to TUNER

1. should be guarded by ground

close to Tuner

18

1

20

22

Global flag

11

9

34

37

27

40

24

23

31

26

close to Tuner

25

36

38

close to Tuner

29

10

5

45

should be guarded by ground,Match GND VIA

28

7

DELETE 1.8V POWER

R1

Vout=0.6*(1+R1/R2)

2A

R2

T2 : Max 1.7Aelse : Max 0.7A

Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATESSPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.FIRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFACTURES SPECIFIED PARTS BE USED FORTHE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

R7107 33

LGD_T-Con_Scanning

R7106 33

CP_BOX

TXB4N

TXA1P

TXA1N

TXB3P

2D/3D_CTL

TXC2N

TXA2N

TXCCLKP

TXC1P

+3.3V_NORMAL

OPC_EN

TXD4P

R710310K

BIT_SEL_LOW

TXB4P

R7105 33

CP_BOX

TXBCLKP

R7108 33

OPC_EN

2D/3D_CTL

TXC4N

TXA0N

TXB1N

TXB2NTXC4P

TXACLKN

TXC1N

TXC0P

TXD0N

TXC0N

TXA3N

C71020.1uF50VOPT

PWM_DIM1

I2C_SDA1

R7104 33

AUO_2D/3D_CTRL

TXB3N

TXA0P

TXC3N

TXB2P

R7101

3.3KLVDS_SEL_HIGH P7101

FI-RE41S-HF-J-R1500

LVDS_41PIN

1NC

2NC

3NC

4NC

5NC

6NC

7NC

8NC

9GND

10RC0N

11RC0P

12RC1N

13RC1P

14RC2N

15RC2P

16GND

17RCCLKN

18RCCLKP

19GND

20RC3N

21RC3P

22RC4N

23RC4P

24GND

25GND

26RD0N

27RD0P

28RD1N

29RD1P

30RD2N

31RD2P

32GND

33RDCLKN

34RDCLKP

35GND

36RD3N

37RD3P

38RD4N

39RD4P

40GND

41GND

42

GND

TXB1P

R710210KLVDS_SEL_LOW

TXD3P

TXC2P

TXB0P

TXCCLKN

TXD1N

TXDCLKP

TXC3P

C710010uF16VOPT

TXDCLKN

TXBCLKN

TXA4P

R7100 33

LGD_2D/3D_CTRL

TXD2N

TXA3P

L7100

BLM18SG121TN1D

LVDS_51PIN

PANEL_VCC

TXD2P

TXA2P

TXD3N

TXD4N

I2C_SCL1

TXA4N

TXB0N

TXACLKP

TXD1P

P7100

FI-RE51S-HF-J-R1500

LVDS_51PIN

1NC

2NC

3NC

4NC

5NC

6AUO_65_MIRROR

7LVDS_SEL

8NC

9NC

10L/DIM_ENABLE

11GND

12RA0N

13RA0P

14RA1N

15RA1P

16RA2N

17RA2P

18GND

19RACLKN

20RACLKP

21GND

22RA3N

23RA3P

24RA4N

25RA4P

26GND

27BIT_SEL

28RB0N

29RB0P

30RB1N

31RB1P

32RB2N

33RB2P

34GND

35RBCLKN

36RBCLKP

37GND

38RB3N

39RB3P

40RB4N

41RB4P

42GND

43GND

44GND

45GND

46GND

47NC

48VLCD

49VLCD

50VLCD

51VLCD

52

GND

C71011000pF50VOPT

TXD0P

R71090

OPT

R7110 33

AUO_L/D_EN

R11093.3K

OPT

TXA3N

TXA1N

PANEL_VCC

TXA2N

TXA0N

+3.3V_NORMAL

L1101

UBW2012-121F120OHM

HD

TXA3P

TXA0P

TXACLKP

TXA2P

C11010.1uF16V

HD

R111010K

OPT

TXA1P

TXACLKN

P7102

10031HR-30

HD

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

571

LVDS_HIGH_MID 2013.07.16

BIT_SEL

LVDS

LVDS_SEL

[41Pin LVDS OUTPUT Connector] [51Pin LVDS OUTPUT Connector]

RB-

RD-

NC

RD+

1

GND

2

RA+

GND

[30Pin HD 60Hz]

NC

NC

GND

RB+

GND

GND

5

8

6

VLCD

7

VLCD

9

14

GND

12

10

13

11

15

3

LVDS_HD

GND

16

GND

28

17

RCL+

GND

LVDS_SEL

22

20

GND

T-CONPinAssign

25

VLCD

18

19RC+

21

27

RC-

Pin Assign is same as LN570B LVDS Cable(EAD62296501)

NC

26

RCLK-

30

29

23

24

VLCD

GND

RA-

LVDS SEL

4

Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

Contents of LCD TV Standard Repair Process

( ) ( )No. Error symptom (High category) Error symptom (Mid category) Page Remarks

1 No video/Normal audio 1

2 No video/No audio 2

A. Video error3 Picture broken/ Freezing 3

4 Color error 4

Vertical/Horizontal bar residual image light spot5 Vertical/Horizontal bar, residual image, light spot, external device color error 5

6B. Power error

No power 6

7 Off when on, off while viewing, power auto on/off 7, g, p

8C. Audio error

No audio/Normal video 8

9 Wrecked audio/discontinuation/noise 9

10D. Function error

Remote control & Local switch checking 10

11 External device recognition error 11

12 E. Noise Circuit noise, mechanical noise 12

Fi t f ll Ch k h th th i SVC B ll ti i GCSC S t f th d l

13 F. Exterior error Exterior defect 13

14 APPENDIX Power Off History

1 / 97

First of all, Check whether there is SVC Bulletin in GCSC System for these model.

Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

Contents of LCD TV Standard Repair Process Detail Technical Manual

No. Error symptom Content Page Remarks

1

A. Video error_ No video/Normal audio

Check LCD back light with naked eye A1

2 LED driver B+ 24V measuring method A2

3 Check White Balance value A3

4 Power Board voltage measuring method A5

6A. Video error_ No video/Video lag/stop

TUNER input signal strength checking method A6

7 LCD-TV Version checking method A7

9 LCD TV ti di A89

A. Video error_Color error

LCD TV connection diagram A8

10 Tuner Checking Part A9

11 Check Link Cable (LVDS) reconnection conditionA10A11

A10 : 32/37/42/47/55A11 : 32 AUO

12 Adjustment Test pattern - ADJ Key A12

13

A. Video error_Vertical/Horizontal bar, residual image light spot

LCD TV connection diagram A8

14 Check Link Cable (LVDS) reconnection conditionA10A11

A10 : 32/37/42/47/55A11 32 AUOresidual image, light spot ( )

A11 A11 : 32 AUO

15 Adjustment Test pattern - ADJ Key A12

16 Exchange T-Con Board (1) A-1/5

17 Exchange T Con Board (2) A 2/5<Appendix>Defected Type caused by T-Con/ Inverter/ Module

17 Exchange T-Con Board (2) A-2/5

18 Exchange LED driver Board (PSU) A-3/5 55” : driver boardOther : PSU

19 Exchange Module itself (1) A-4/5

2 / 97

g ( )

20 Exchange Module itself (2) A-5/5

Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

Establishedd tError A. Video error 2014 1 2

Standard Repair Process

date

Revised date 1/13LCD TV Error

symptomA. Video error

No video/ Normal audio

First of all, Check whether all of cables between board is inserted properly or not.(Main B/D↔ Power B/D, LVDS Cable,Speaker Cable,IR B/D Cable, ETC…)

2014. 1 .2

Normal audio

YNo videoNormal audio

Check Back LightOn with naked eye On

Y Check Power Board12V,3.5V etc.

Normal voltage

Y Replace T-con Board or moduleAnd Adjust VCOM

A4A1

( , , p , , )

N

Move to No video/No audio

N N

j

Repair Power Board or parts

Check Power Board 24V outputA2A28

Normalvoltage

Y Replace Inverter or module

NRepair Power

End

Repair Power Board or parts

Always check & record S/W Version and White Balance value before replacing the Main Board Replace Main Board Re-enter White Balance value

※Precaution A7 & A3

3 / 97Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

A. Video error Establishedd tError 2014 1 2

Standard Repair Process

A. Video errorNo video/ No audio

date

Revised date 2/13LCD TV Error

symptom2014. 1 .2

C

A4

Normalvoltage?

Check various voltages of Power Board ( 3.5V,12V or 24V…)

No Video/No audio

Check and replace MAIN B/D

Y

N End

Replace Power Board and repair parts

4 / 97Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

Establishedd tError 2014 1 2

Standard Repair Process

A. Video errorPicture broken/ Freezing

A6 . By using Digital signal level meter

date

Revised date 3/13LCD TV Error

symptom2014. 1 .2A. Video error

A6Check RF Signal level

. By using Diagnostics menu on OSD( Menu → Settings → Support → Signal Test )- Signal strength (Normal : over 50%)- Signal Quality (Normal: over 50%)

Y

N

Normal Signal?

Check whether other equipments have problem or not.(By connecting RF Cable at other equipment)

→ DVD Player ,Set-Top-Box, Different maker TV etc`

N

N

Check RF Cable Connection

1. Reconnection2. Install Booster

CheckS/W Version

SVC Bulletin?

Y

Normal Picture?

Y A7

S/W Upgrade CheckTuner soldering

Normal

Y

N

Contact with signal distributoror broadcaster (Cable or Air)

N

Normal Picture?

Y

N

ReplaceMain B/D

Picture?

Y

Close

Y

Close

5 / 97Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

A. Video error Establishedd tError 2014 1 2

Standard Repair Process

Color error

A8

date

Revised date 4/13LCD TV Error

symptom2014. 1 .2

Colorerror?

Y

※ Check and replace Link Cable(LVDS) and contact

YReplace Main B/DColor

error?

Check color by input-External Input-COMPONENT-AV

A8

YReplace moduleColor

error?

A10/ A11

Ncontact condition N

Check error color input mode

-HDMI/DVI N

End

YExternal device/Cablenormal

External Input/Component/ AV

error

Check external device andcable

Replace Main B/D

N

Check Test pattern

A12

N

N

Request repair for external device/cable

YExternal device/Cablenormal

HDMI/DVIerror

Check external device and cable

Replace Main B/D

6 / 97Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

A. Video error Establishedd tError 2014 1 2

Standard Repair Process

Vertical / Horizontal bar, residual image, light spot, external device color error

date

Revised date 5/13LCD TV Error

symptom

Vertical/Horizontal bar, residual image, light spotReplaceModule

2014. 1 .2

Screennormal?

YCheck external device connection condition

Y Check and replace Link Cable

Normal?NScreen

normal? Replace Main B/D(adjust VCOM)

Check color condition by input-External Input-Component-AVHDMI/DVI

N

Module

Screennormal?

A8 A10/ A11

A28

N N Y

Replace module

-HDMI/DVI

EndRequest repair for external deviceA12

Y

Replace Main B/D

For LGD panel

End

Check Test pattern For other panel

External device screen error-Color error

External Inputerror

Connect other external device and cable N

R lScreen

Check screen condition by input-External Input-Component

Check S/W Version NCheckversion

error and cable(Check normal operation of External Input, Component, AV and HDMI/DVI by connecting Jig, pattern Generator ,Set-top Box etc.

Y

Replace Main B/D

Screennormal?-AV

-HDMI/DVI

Request repair for external device

Component/AVerror

HDMI/

Y

S/W Upgrade

HDMI/DVI Connect other external device

and cable(Check normal operation of External Input, Component, AV and HDMI/DVI by connecting Jig, pattern Generator ,Set-top B t

Replace Main B/D

Screennormal?

N

Y

Y

NNormalscreen?

End

7 / 97

Box etc. End

Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

B. Power error Establishedd tError 2014 1 2

Standard Repair Process

No power

A17 A19

date

Revised date 6/13LCD TV Error

symptom2014. 1 .2

Power LEDOn?

Y

N

DC Power onby pressing Power Key On Remote control

Y

NNormal operation?

Check Power On ‘”High”

Check Power LED

Replace Power B/D

YOK?

A17 A19

. Stand-By: Red or Logo Light ON

. Operating : offCheck Power cordwas inserted properly

Measure voltage of each output of Power B/D

Replace Main B/D

NNormal?

A4

YNormalvoltage?

Replace Main B/D

Y

Ch k ST BY 3 5V Normal

Y※

CloseN

Check ST-BY 3.5V

Replace Power B/DN

YNormal

voltage?

A18

Replace Power B/D

8 / 97Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

B. Power error Establishedd tError 2014 1 2

Standard Repair Process

Off when on, off while viewing, power auto on/offdate

Revised date 7/13LCD TV Error

symptom

Check outlet

A22

2014. 1 .2

Error?N

Y

Check Power OffMode

Check A/C cord

Check for all 3- phasepower out

Replace Main B/DCPUAbnormal

Replace Power B/D

N

YNormal? End

Abnormal 1

Fix A/C cord & Outlet and check each 3 phase out

p

(If Power Off mode is not displayed)Check Power B/D

YReplace Main B/DNormal

voltage?

A19

1

※ CautionCheck and fix exterior of Power B/D Part

voltageN

g

Replace Power B/D

* Please refer to the all cases which can be displayed on power off mode.Click the below Hyper_link

9 / 97Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

C. Audio error Establishedd tError 2014 1 2

Standard Repair Process

C. Audio errorNo audio/ Normal video

date

Revised date 8/13LCD TV Error

symptom2014. 1 .2

No audioScreen normal

Check user menu > TV

Speaker?Y Check audio B+ 24V

of Power Board Normalvoltage

Y

A24 A25

Screen normal Sound Out Speaker?

N

Change the TV Speaker

voltage

N

Replace Power Board and repair parts

Check Speaker disconnection

NReplace MAIN Board EndDisconnection

Y

Replace Speaker / Cable

10 / 97Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

C. Audio error Establishedd tError 2014 1 2

Standard Repair Process

→ abnormal audio/discontinuation/noise is same after “Check input signal” compared to No audio

C. Audio errorWrecked audio/ discontinuation/noise

date

Revised date 9/13LCD TV Error

symptom2014.1.2

Wrecked audio/Discontinuation/

Noise for all audio

Check and replace speaker and connector

YCheck input signal Signal Y

Check audio B+ Voltage (24V)

A25

Wrecked audio/Discontinuation/

Noise only for D-TV

W k d di /

N

Normalvoltage?

-RF-External Input signal

Signal normal?

Replace Main B/DN

Wrecked audio/Discontinuation/

Noise only for Analog

Replace Power B/D

(When RF signal is not received)R t i t t l R l M i B/D EndWrecked audio/

Discontinuation/Noise only

for External InputConnect and check other external device

NNormalaudio?

Request repair to external cable/ANT provider

Replace Main B/D

(In case of External Input signal error)Check and fix

End

Y

Check and fix external device

external device

11 / 97Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

D. General Function Problem Establishedd tError 2014 1 2

Standard Repair Process

Remote control & Local switch checking

1. Remote control(R/C) operating error ReplaceMain B/D

date

Revised date 10/13LCD TV Error

symptom2014.1.2

Y

N

Check R/C itself Operation

Normaloperating?

Y

Check & RepairCable connectionConnector solder

Normaloperating?

Check B+ 3.5VOn Main B/D

A27

NormalVoltage?

N Check IROutput signal

NormalSignal?

N

Y

N

A27Y

A27

Y

Check R/C OperatingWhen turn off light

in room

Check & ReplaceBaterry of R/C

Close Check 3.5v on Power B/DReplace Power B/D or

Replace Main B/D(Power B/D don’t have problem)

A4N

Repair/ReplaceIR B/D

N

Normaloperating? Close

Replace R/C

If R/C operate,Explain the customer cause is interferencefrom light in room. N

p

12 / 97Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

D. Function error Establishedd tError 2014 1 2

Standard Repair Process

External device recognition error date

Revised date 11/13LCD TV Error

symptom2014.1.2

Check technical information NTechnical

Check inp t Signal

Y External Input andC t Replace Main B/D- Fix information

- S/W VersionY

information?input signal

ginput?

N

ComponentRecognition error

Check and fix HDMI/

DVI, Optical

Replace Main B/D

Replace Main B/DFix inexternal device/cableDVI, Optical

Recognition errorReplace Main B/DFix in

accordance with technical information

13 / 97Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

E. Noise Establishedd tError 2014 1 2

Standard Repair Process

Circuit noise, mechanical noisedate

Revised date 12/13LCD TV Error

symptom2014.1.2

Check location of noise

Identify noise type

Circuit noise

Replace PSU(with LED driver)

ORof noisenoise type noiseReplace LED driver

Mechanical noise

Check location of noisenoise

※ When the nose is severe, replace the module(For models with fix information, upgrade the S/W or ※ Mechanical noise is a natural provide the description)

※ If there is a “Tak Tak” noise from the cabinet, refer to the KMS fix information and then proceed as shown in the solution manual(For models without any fix information, provide

phenomenon, and apply the 1st level description. When the customer does not agree, apply the process by stage. ※ Describe the basis of the description in “Part related to nose” in the Owner’s Manual.

OR

(For models without any fix information, provide the description)

14 / 97Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

F. Exterior defect Establishedd tError 2014 1 2

Standard Repair Process

F. Exterior defectExterior defect

date

Revised date 13/13LCD TV Error

symptom2014.1.2

Replace moduleZoom part with exterior damage

Moduledamage

Cabinet

Adjust VCOM

A28

Cabinetdamage Replace cabinet

Replace remote controllerRemote

controllerdamagedamage

Standdent Replace stand

15 / 97Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

Contents of LCD TV Standard Repair Process Detail Technical Manual

Continued from previous pagep p g

No. Error symptom Content Page Remarks

21 Check front display LED A17

22 Check power input Voltage & ST-BY 3 5V A18

B. Power error_No power

22 Check power input Voltage & ST-BY 3.5V A18

23 Checking method when power is ON A19

24 POWER BOARD voltage measuring method A5

2525

26 B. Power error_Off when on, off while viewing POWER OFF MODE checking method A22

27 B. Power error_Off when on, off while viewing POWER BOARD PIN voltage checking method A19viewing

28C. Audio error_No audio/Normal video

Checking method in menu when there is no audio A24

29 Voltage and speaker checking method when there is no audio A25there is no audio

30 C. Audio error_Wreckedaudio/discontinuation

Voltage and speaker checking method in case of audio error A25

31 D. Function error_ No response in remote controller key error Remote controller operation checking method A27controller, key error

32 D. VCOM Adjustment Sequence of the Vcom adjustment A28

16 / 97Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

Standard Repair Process Detail Technical Manual

A Video error No video/Normal audio Established Error t 2014 1 2

Check White Balance value

A. Video error_No video/Normal audio

<ALL MODELS>

A3date

Revised date

symptom

ContentLCD TV 2014.1.2

Entry method Entry method

1. Press the ADJ button on the remote controller for adjustment.

2. Enter into White Balance of item 6.

3 After recording the R G B (GAIN Cut) value of Color Temp (Cool/Medium/Warm) re-

1. Press the ADJ button on the remote controller for adjustment.

2. Enter into White Balance of item 7.

3 After recording the R G B (GAIN Cut) value of Color Temp (Cool/Medium/Warm) re

17 / 97

3. After recording the R, G, B (GAIN, Cut) value of Color Temp (Cool/Medium/Warm), re-enter the value after replacing the MAIN BOARD.

3. After recording the R, G, B (GAIN, Cut) value of Color Temp (Cool/Medium/Warm), re-enter the value after replacing the MAIN BOARD.

Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

A Video error No video/ Audio Established Error t 2014 1 2

Standard Repair Process Detail Technical Manual

Power Board voltage measuring method

A. Video error_No video/ AudioA5

date Revised

date

symptom

ContentLCD TV

Check the DC 24V, 12V, 3.5V.

2014.1.2

18 or 24 Pin (Power Board ↔ Main Board) - 공통

SMAW200-H18/24S5 (YEONHO)

1 PWR ON/OFF 2 INV ON 3 3.5V 4 PDIM #1 5 3.5V 6 3.5V7 GND 8 PDIM #2 9 24V 10 24V9 24V 10 24V 11 GND 12 GND 13 12V 14 12V 15 12V 16 24V or N.C 17 GND 18 GND17 GND 18 GND 19 GND 20 GND 21 GND 22 L/DIMO_VS23 L/DIMO_MOSI 24 L/DIMO-SCLK

The Wafer,18Pin and 24Pin, is used by operating LocalDimming or not LocalDimming

- 24Pin wafer is applied operating L/D at power and main B/D- 18Pin wafer is applied not operating L/D at power and main B/D

18 / 97Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

A Video error Video error video lag/stop Established Error t 2014 1 2

Standard Repair Process Detail Technical Manual

TUNER input signal strength checking method

A. Video error_Video error, video lag/stop

<ALL MODELS>

A6date

Revised date

symptom

ContentLCD TV 2014.1.2

MENU - Settings support - signal test- select channel

When the signal is strong, use the attenuator (-10dB, -15dB, -20dB etc.)

19 / 97Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

A Video error Video error video lag/stop Established 2014 1 6Error

t

Standard Repair Process Detail Technical Manual

LCD-TV Version checking method

A. Video error_Video error, video lag/stop

1. Checking method for remote controller for adjustment<ALL MODELS>

A7date

Revised date Content

LCD TV 2014. 1 . 6symptom

Version

Press the IN-START with the remote controller for adjustment

20 / 97Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

A. Video error _Vertical/Horizontal bar, residual Established Error t 2014 1 2

Standard Repair Process Detail Technical Manual

LCD TV connection diagram (1)image, light spot

A8

date Revised

date

symptom

ContentLCD TV

<ALL MODELS>

2014.1.2

As the part connecting to the external input, h k th diti b i l

21 / 97

check the screen condition by signal

Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

A. Video error Video error, video lag/stop Established Error t 2014 1 6

Standard Repair Process Detail Technical Manual

TUNER checking part

A. Video error_Video error, video lag/stop

<ALL MODELS>

A9date

Revised date

symptom

ContentLCD TV 2014. 1 .6

Checking method: 1. Check the signal strength or check whether the screen is normal when the external device is connected.

22 / 97

g g2. After measuring each voltage from power supply, finally replace the MAIN BOARD.( with Main to Power Cable, Speaker Cable and LVDS or EPI Cable)

Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

A. Video error Color error Established Error t 2014 1 2

Standard Repair Process Detail Technical Manual

Adjustment Test pattern - ADJ Key

A. Video error_Color error

A12date

Revised date

symptom

ContentLCD TV 2014.1.2

You can view 6 types of patterns using the ADJ KeyChecking item : 1 Defective pixel 2 Residual image 3 MODULE error (ADD BAR SCAN BAR )

23 / 97

Checking item : 1. Defective pixel 2. Residual image 3. MODULE error (ADD-BAR,SCAN BAR..)4.Video error (Classification of MODULE or Main-B/D!)

Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

B Power error No power Established Error t 2014 1 2

Standard Repair Process Detail Technical Manual

Check front display LED

B. Power error _No powerA17

date Revised

date

symptom

ContentLCD TV 2014.1.2

Front LED control :Front LED control :Menu Option LG Logo Light

Brightness and Duration

ST-BY condition: Red or Logo Light ONg gPower ON condition: OFF or User Settings

24 / 97Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

B Power error No power Established Error t 2014 1 6

Standard Repair Process Detail Technical Manual

Check power input voltage and ST-BY 3.5V

B. Power error _No powerA18

date Revised

date

symptom

ContentLCD TV

For 13’ models, there is no voltage out for st-by purpose. When st-by only 3 5V is normally on

2014. 1 .6

When st by, only 3.5V is normally on.

Edge LED

18 or 24 Pin (Power Board ↔ Main Board) - 공통

FREE LGP-14PL1-IT

1 PWR ON/OFF 2 INV ON

Edge LED

3 3.5V 4 PDIM #1 5 3.5V 6 GND 7 GND 8 PDIM #2 9 24V 10 24V9 24V 10 24V 11 GND 12 GND 13 12V 14 12V 15 12V 16 24V or N.C 17 GND 18 GND17 GND 18 GND 19 GND 20 GND 21 GND 22 L/DIMO_VS23 L/DIMO_MOSI 24 L/DIMO_SCLK

The Wafer,18Pin and 24Pin, is used by operating LocalDimming or not LocalDimming

- 24Pin wafer is applied operating L/D at power and main B/D- 18Pin wafer is applied not operating L/D at power and main B/D

25 / 97Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

B Power error No power Established Error t 2014 1 2

Standard Repair Process Detail Technical Manual

Checking method when power is ON

B. Power error _No powerA19

date Revised

date

symptom

ContentLCD TV

Check “power on” pin is high

2014.1.2

Edge LED

18 or 24 Pin (Power Board ↔ Main Board) - 공통

FREE LGP-14PL1-IT

1 PWR ON/OFF 2 INV ON

Edge LED

3 3.5V 4 PDIM #1 5 3.5V 6 3.5V 7 GND 8 PDIM #2 9 24V 10 24V9 24V 10 24V 11 GND 12 GND 13 12V 14 12V 15 12V 16 24V or N.C 17 GND 18 GND17 GND 18 GND 19 GND 20 GND 21 GND 22 L/DIMO_VS23 L/DIMO_MOSI 24 L/DIMO_SCLK

The Wafer,18Pin and 24Pin, is used by operating LocalDimming or not LocalDimming

- 24Pin wafer is applied operating L/D at power and main B/D- 18Pin wafer is applied not operating L/D at power and main B/D

26 / 97Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

B. Power error Off when on off whiling viewing Established Error t 2014 1 6

Standard Repair Process Detail Technical Manual

POWER OFF MODE checking method

B. Power error _Off when on, off whiling viewing

<ALL MODELS>

A22date

Revised date

symptom

ContentLCD TV 2014.1.6

Entry methodEntry method

1. Press the IN-START button of the remote controller for adjustment

27 / 97

2. Check the entry into adjustment item 3

Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

C. Audio error No audio/Normal video Established Error t 2014 1 2

Standard Repair Process Detail Technical Manual

Checking method in menu when there is no audio

C. Audio error_No audio/Normal video

<ALL MODELS>

A24date

Revised date

symptom

ContentLCD TV 2014.1.2

Checking methodChecking method1. Press the MENU button on the remote controller

2. Select the SOUND function of the Menu

3. Select TV Speaker from Others

28 / 97Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

Standard Repair Process Detail Technical Manual

C Audio error No audio/Normal video Established Error t 2014 1 6

18 or 24 Pin (Power Board ↔ Main Board) - 공

Voltage and speaker checking method when there is no audio

C. Audio error_No audio/Normal video

<ALL MODELS>

A25date

Revised date

symptom

ContentLCD TV

①

2014. 1 .6

18 or 24 Pin (Power Board Main Board) 공통

FREE LGP-14PL1-IT

1 PWR ON/OFF 2 INV ON3 3.5V 4 PDIM #1

②

5 3.5V 6 3.5V7 GND 8 PDIM #2 9 24V 10 24V 11 GND 12 GND 13 12V 14 12V

②

13 12V 14 12V 15 12V 16 24V or N.C 17 GND 18 GND 19 GND 20 GND 21 GND 22 L/DIMO_VS

③

23 L/DIMO_MOSI 24 L/DIMO_SCLK

The Wafer,18Pin and 24Pin, is used by operating LocalDimming or not LocalDimming

24Pi f i li d i /D d i B/DChecking order when there is no audio

- 24Pin wafer is applied operating L/D at power and main B/D- 18Pin wafer is applied not operating L/D at power and main B/D① Check the contact condition of or 24V connector of Main Board

② Measure the 24V input voltage supplied from Power Board(If there is no input voltage, remove and check the connector)

③ C h RX1 h k i l d if h h “Chik Chik” d h h h GND

29 / 97

③ Connect the tester RX1 to the speaker terminal and if you hear the “Chik Chik” sound when you touch the GND and output terminal, the speaker is normal.

Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

D. Function error_ No response in remote controller,k

Established Error t 2014 1 6

Standard Repair Process Detail Technical Manual

P4102

Remote controller operation checking method

key error

<ALL MODELS>

A27date

Revised date

symptom

ContentLCD TV 2014. 1 .6

P4102

1 GND

2 KEY1

3 KEY2

4 +3.5V_ST③

5 GND

6 LOGO/LED_R

7 IR

8 GND

9 EYE SCL

④

9 EYE_SCL

10 EYE_SDA

Checking order

①

②

g

1, 2. Check IR cable condition between IR & Main board.3. Check the st-by 3.5V on the terminal 6.4. When checking the Pre-Amp when the power is in ON condition, it is normal when the Analog

Tester needle moves slowly, and defective when it does not move at all.

30 / 97Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

D VCOM Adjustment Established Error t 2014 1 2

Standard Repair Process Detail Technical Manual

Sequence of the Vcom adjustment

D. VCOM Adjustment

1. Case LCD d l h

A28date

Revised date

symptom

ContentLCD TV 2014.1.2

LCD module change T-Con board change

2. Equipment Service Remote controller Service Remote controller

3. Adjust sequence Press the ‘adj’ key select V-COM A hi th i ht th l ft b tt th t t ll A d fi d th V COM l Whi h i As pushing the right or the left button on the remote controller, And find the V-COM value Which is no orminimized the Flicker.(If there is no flicker at default value, Press the exit key and finish the VCOM adjustment.) Push the OK key to store the value. Then the message “Saving OK” is pop. Press the exit key to finish V-COM adjustment.y j

31 / 97Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

Appendix : Power OFF History

Status Power off List Explanation

POWER_OFF_BY_REMOTE KEY POWER_OFF_BY_REMOTE CONTROL

POWER_OFF_BY_OFF_TIMER POWER_OFF_BY_OFF TIMER

POWER_OFF_BY_SLEEP_TIMER POWER_OFF_BY_SLEEP TIMER

POWER_OFF_BY_TS_END POWER_OFF_BY_REMOTE or LOCAL KEY While recording

POWER_OFF_BY_INSTOP_KEY POWER_OFF_BY_INSTOP KEY

POWER_OFF_BY_AUTO_OFF POWER_OFF_BY_AUTO OFF

POWER_OFF_BY_ON_TIMER POWER_OFF_BY_ON TIMER

NormalPOWER_OFF_BY_RS232C POWER_OFF_BY_RS232C

POWER_OFF_BY_RESREC POWER_OFF_BY_Reservated Record

POWER_OFF_BY_RECEND POWER_OFF_BY_End of Recording

POWER_OFF_BY_SWDOWN POWER_OFF_BY_S/W Download

POWER_OFF_BY_LOCAL_KEY POWER_OFF_BY_LOCAL KEY

POWER_OFF_BY_OTA POWER_OFF_BY_End of OTA

POWER_OFF_BY_SIGNAL_DETECT POWER_OFF_BY_Another MICOM (Only OLED)

POWER_OFF_BY_RESET POWER_OFF_BY_Factory Reset

POWER_OFF_BY_UNKNOWN POWER_OFF_BY_unknown status except listed case

POWER_OFF_BY_ABN POWER_OFF_BY_abnormal Panel status

POWER_OFF_BY_KEY_TIMEOUT POWER_OFF_BY_abnormal Power Off Key At Warm/Hot status

POWER_OFF_BY_ACDET POWER_OFF_BY_AC OFF

Abnormal POWER_OFF_BY_5VMNT POWER_OFF_BY_AC DETECT

POWER_OFF_BY_NO_POLLING POWER_OFF_BY_MCU Abnormal for 15 sec.

POWER_OFF_BY_1SEC_POWER_OFF POWER_OFF_BY_MCU Abnormal status with Power Off Key

POWER_OFF_BY_20VMNT POWER_OFF_BY_abnormal Panel status (Only OLED)

32 / 97Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

Appendix : Exchange T-Con Board (1)

Solder defect, CNT Broken Solder defect, CNT Broken Solder defect, CNT Broken

T-Con Defect, CNT BrokenT-Con Defect, CNT BrokenT-Con Defect, CNT BrokenSolder defect, CNT Broken Solder defect, CNT Broken Abnormal Power Section

33 / 97

Solder defect, Short/Crack Abnormal Power Section Solder defect, Short/Crack

Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

Appendix : Exchange T-Con Board (2)

Abnormal Power Section Solder defect, Short/CrackAbnormal Power Section

Solder defect Short/Crack Fuse Open Abnormal power section Abnormal DisplaySolder defect, Short/Crack Fuse Open, Abnormal power section p y

34 / 97

GRADATION Noise GRADATION

Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

Appendix : Exchange PSU(LED driver)

No Light Dim Light

Dim Light Dim LightDim Light Dim Light

35 / 97

No picture/Sound Ok

Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

Appendix : Exchange the Module (1)

Panel Mura, Light leakage Press damagePanel Mura, Light leakage

CrosstalkCrosstalk Press damage

Un-repairable CasesIn this case please exchange the module.

36 / 97

Press damage

Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only

Appendix : Exchange the Module (2)

Vertical BlockSource TAB IC Defect

Vertical LineSource TAB IC Defect

Vertical BlockSource TAB IC DefectSource TAB IC Defect

Horizontal Block Gate TAB IC Defect Gate TAB IC DefectHorizontal BlockGate TAB IC Defect

Horizontal lineGate TAB IC DefectGate TAB IC Defect Gate TAB IC Defect Gate TAB IC Defect

Un-repairable Cases

Horizontal Block

In this case please exchange the module.

37 / 97

Gate TAB IC DefectHorizontal BlockGate TAB IC Defect

Copyright 2014 LG Electronics. Inc. All right reserved. Only for training and service purposes

LGE Internal Use Only