“Where Your Dreams Begin to Come True”

Low maintenance composite decking system for new projects, renovations and re-surface.

95%

www.northerncompositeproducts.com

The management team of Northern Composite Products has over 20 years of combined composite knowledge as well as over 125 years of extrusion and injection mold experience.

We understand the expansion and contraction of plastics, the effect of water absorption, fading and mildew of the product. We have the technical staff that has worked through challenges in every aspect related to extrusion.

We have defined our product from others in the industry using rice hulls as the natural fiber. Northern uses 95% recycled material / natural fiber, glass spheres and other important additives.

Northern Composite Products has the leading technology to extrude hollow deck boards. NCP’s board strength is equivalent to most of the solid boards of our competitors.

Slide & Go Fastening System is user friendly allowing installation to be easy with a professional result. Slide & Go® has a hidden fastening device that equally spaces your deck board, allowing for expansion and contraction.

We are confident you will enjoy your low maintenance deck experience.

95%

95%

Rice Hulls, a natural fiber is a large percentage of our formula used in the process replacing wood. Rice hulls are unique within nature. They contain approximately 20% opaline silica in combination with a large amount of the phenyl propanoid structural polymer called lignin. This abundant agricultural waste has all of the properties one could ever expect of some of the best insulating materials. Recent ASTM testing conducted reveals that rice hulls do not flame or smolder very easily. They are highly resistant to moisture penetration and fungal decomposition and they do not transfer heat very well. They do not smell or emit gases and they are not corrosive with respect to aluminum, copper or steel. In their raw and unprocessed state, rice hulls constitute a Class A or Class I insulation. Northern Composite Products offers numerous profiles that allow installers to “trim out” the entire deck surface project with composite material. The Slide & Go® Fasteningsystem is a user friendly approach to deck surface installation.

WHY Choose Northern Composite Products?What Makes Our Product Different?

www.northerncompositeproducts.com

- No painting- Slip resistant- No splinters- Low water absorption- Less likely to allow moisture to propagate mold or fungi- Can be power washed- Wood grain appearance

- Minimal fading- No revealing nails- Low Maintenance- Slide & Go System aligns boards for- Professional construction appearance- 20 year prorated warranty

Northern Composite Products offers a unique SYSTEM for new deck application, or renovations and resurface of existing decks. NCP system consists of deck boards, expansion trim, fascia, hole plugs, and a concealed fastening system. Easy installation guide and various colours. Technical support available.

ADVANTAGES

MANUFACTURED FROM UNIQUE MATERIAL

Over 95% Recycled/Natural Fiber (Other formulated additives)

Rice Hulls(Natural fiber)

Glass Spheres(Recycled)

High DensityPolyethylene (Recycled)

95%

CHESTNUT

Before After minimal fading

MAPLE

Before After minimal fading

CEDAR

Before After minimal fading

HERITAGE GREY

Before After minimal fading

MAHOGANY

Before After minimal fading

FIVE NATURAL WOOD COLOURS

CN

MP

CR

HG

MG

95%

95%

www.northerncompositeproducts.comwww.northerncompositeproducts.com

ITEM DESCRIPTION SIZES(NOMINAL)

Flat wood grain on both sides 5-1/8 x 15/16 x 12' 5-1/8 x 15/16 x 16' 5-1/8 x 15/16 x 20' Available Colors:

NCP DECKING

Enviroboard (hollow)

Varigated

Accuspan

Northernlite

Fascia

Flat wood grain on both sides 5-1/8 x 15/16 x 12’ 5-1/8 x 15/16 x 16’ 5-1/8 x 15/16 x 20’ Available Colors: Brazilian Cherry and Amazon Grey

Solid grooved board 5-1/8 x 15/16 x 12' 5-1/8 x 15/16 x 16' 5-1/8 x 15/16 x 20' Available Colors:

Solid decking board 5-1/8 x 15/16 x 12' 5-1/8 x 15/16 x 16' 5-1/8 x 15/16 x 20' Available Colors:

Solid fascia board 5/8 x 7-1/2 x 12' 1/2 x 6 x 12' 5/8 x 3-1/2 x 12' Available Colors:

Each board is available in all 5 colours.

CN MP CR HG MG

Kombiprofil

Euroboard

Rolling grove brushed finish 5-1/8 x 15/16 x 12' and V-grooved 5-1/8 x 15/16 x 16' 5-1/8 x 15/16 x 20' Available Colors:

V-grooved and flat wood grain 5-1/8 x 15/16 x 12' 5-1/8 x 15/16 x 16' 5-1/8 x 15/16 x 20' Available Colors:

CN MP CR HG MG

CN MP CR HG MG

BC AG

CN MP CR HG MG

CN MP CR HG MG

CN MP CR HG MG

95%

www.northerncompositeproducts.com

End Caps T-Trim

Expansion trim for large decks

ITEM DESCRIPTION SIZES(NOMINAL)

Under construction material 12' length Non structural, used on flat structural surface ie. Concrete and flat roofs. Available Colors:

NCP DECKING ACCESSORIES

Dock Material

Under Construction

E-trim Expansion Trim 12' length Slide & Go corner trim and joint mouldings Available Colors:

Fastening clips and driver bit

Hole plugs

Hollow material for docks and 5-1/8 x 15/16 x 12' other building needs 5-1/8 x 15/16 x 16' 5-1/8 x 15/16 x 20' Available Colors:

CN M CR HG MG

CN M CR HG MG

CN MP CR HG MG

95%

95%

SLIP RESISTANT SURFACE.

www.northerncompositeproducts.comwww.northerncompositeproducts.com

95%

POWER WASH FRIENDLY.

GETTING STARTEDChoose:- Deck board style- Colour (5 colours available)- Matching E Trim and Fascia Boards with Hole plugs- Fastener Kit

Fastener Kit includes 250 Fasteners and stainless steel screws, 1 driver bit and installation Instructions (Covers approx. 10‘ X 10’ surface)

Fastener Calculation - 2.5 fasteners /sq ft.

TOOLS REQUIRED- Pencil- Level- Jigsaw- Handsaw- Drill- Chalk Line- Square- Tape MeasureOptional:Chop Saw/Table Saw

QUICK TIPS- Ensure you read the installation guide prior to starting- Ensure you follow proper fastening methods as per installation guide- Do not over torque screws- Leave sufficient overhang on boards for expansion and contraction- To finish off your deck use E Trim and Fascia boards with hole plugs- All sub-sturcture must comply with Local Building Official Code

Visit our website for complete installation instructions, www.northerncompositeproducts.com.

WHY CHOOSE NORTHERN COMPOSITES?Low Maintenance Composite Decking for New Projects, Renovations and Re-Surface.

Manufactured from Unique Natural MaterialRice Hulls, Glass Spheres, High Density Polyethylene and other additivesOver 95% Recycled /Natural Fiber

www.northerncompositeproducts.com

SLIDE & GO® FASTENING CLIP

E-TRIM AND FASCIA BOARDS

For new decks or resurface

To finish off your deck use Nothern Composite Products E-Trim and Fascia in conjunction with E-Trim connectors and connector brackets.

Visit our website for complete installation instructions, www.northerncompositeproducts.com.

Concealed Fastening System

E-Trim allows for expansion and contraction.

Fascia available to enclose joists.

Fascia and hole plugs for a professional finish.

95%

CLEANING AND CARE RECOMMENDATIONSSTORAGEStore Northern Composite Products under cover to maintain a clean surface. If stored outdoors, they must be covered with a tarp designed for outside use. Products should be stored in a dry space with bottom supports equally spread apart. Long term storage product should be banded together.

HANDLING- Never dump NCP materials when unloading- When carrying NCP decking, it is easier to carry on edge- Do not slide planks against each other when moving them. When removing deck boards from the skids the boards should be lifted and set them down- Do not slide tools or drag equipment across the top of the planks during construction- Keep the surface of the planks free of construction waste to prevent damage to the planksFOLLOW ALL the guidelines above when handling these planks to minimize scratches, nicks and grooves, and preserve the natural colour and wood grain appearance.

BASIC CLEANING RECOMMENDATIONSAlthough NCP products are low-maintenance, NCP recommends periodic cleaning to help maintain the natural wood grain of the product. For best results power wash using dish soap detergent. The recommended maximum pressure is 1700 psi for NCP decks. A fan tip nozzle must be used along with the proper cleaning product. Spray in the direction of the brush/grain pattern to avoid damaging the product. Use caution not to damage the material and always take the proper safety precautions when operating a power washer.

ICE AND SNOWFor ice removal; either rock salt or calcium chloride may be used without damage to the surface. However, either of these products may leave a white residue, which may be removed by either rinsing with water or a mild soap/water solution. If shoveling the deck, a plastic shovel or a shovel with a plastic edge must be used. Ensure you shovel in the same direction the deck boards are installed in length. Going across the deck boards will leave scratch marks.

PAINTING/STAINING/SEALINGAlthough NOT recommended, NCP products may be painted or stained. Once the product is painted, stained or sealed, subsequent applications will be necessary to maintain appearance. NCP does not guarantee the perfor-mance of anything applied to the product.Wait approximately 4 to 6 weeks or until the product has completed its weathering process before painting or staining. Clean your NCP surface prior to applying paint or stain. Never paint or stain over surfaces that may contain dirt, or mildew. Apply paints and sealers in accordance with the manufacturer’s application instructions.

DIRT, GRIME, MOLD AND MILDEW STAINSNCP products are formulated with 95% natural fiber (Rice Hulls), Recycled bottles glass spheres and other additives. Rice Hulls are highly resistant to moisture penetration and fungal decomposition. Mold, Mildew and Fungi will grow on everything; however the Rice Hulls prevent the mold to grow into the product.NCP recommends products should be periodically hosed or power wash. Even if it appears clean, it is important to prevent build-up of pollen/debris. Mildew stains may occur where moisture, pollens, and/or dirt are present. Mildew needs a food source to grow, which can be grass, pollens, dirt, debris, wood and wood resins. Maintaining a clean, dry surface is the best method for combating mildew.

SPOT STAINS AND SCRATCHESMany stains can be cleaned with soap and water. If the stains have set NCP recommends using a wire brush going with the grain to remove the stain. Areas cleaned may lighten; this will require 6 to 10 weeks exposure to the sun to match the remaining product.

“Always wipe up spills immediately to avoid a potential permanent stain”

www.northerncompositeproducts.com

STAIN TEST AND HOW TO CLEAN, CARE AND REPAIR

Ketchup Relish Wine

Cleaned with warm water and regular dish sopa after 24 hours.

NCP cedar composite board.

Using a brass wire brush removed the remaining stains.

Mustard

95%

95%

Made in Fergus, Ontario, Canadavisit us @ www.northerncompositeproducts.com

Slide and Go Patent Pending #2,608,118E-Trim Patent Pending #2,603,327

95%