north america europe hello anleitung.pdf · questions or concerns, please contact our customer...
TRANSCRIPT
TAOTRONICS ULTRASONIC AROMA DIFFUSER
User Guide
Hello
TT-AD003
EUROPEE-mail: [email protected](UK)[email protected](DE)[email protected](FR)[email protected](ES)[email protected](IT)EU Importer: ZBT International Trading GmbH, Lederstr 21a, 22525 Hamburg, Deutschland
NORTH AMERICAE-mail : [email protected](US)[email protected](CA)Tel : 1-888-456-8468 (Monday-Friday: 9:00 – 17:00 PST)Address: 46724 Lakeview Blvd, Fremont, CA 94538
ASIA PACIFICE-mail : [email protected](JP)
www.taotronics.com
Shenzhen NearbyExpress Technology Development Company LimitedAddress: Block D, Minle Industrial Park, Meiban Road, Longhua District, Shenzhen, China. 518131
MANUFACTURER
MADE IN CHINA
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must withstand any interference received,including interference that may cause undesired operation.
CONTENTS
English
Deutsch
Français
Español
Italiano
日本語
01/08
09/16
17/24
25/32
33/40
41/47
Thank you for choosing the TaoTronics Ultrasonic Aroma Diffuser. Please read this manual carefully and store it in a safe place for future reference. If you have any questions or concerns, please contact our customer support team by email at [email protected].
US UK CA
Features• Contemporary home décor design
• Ultrasonic diffuser
• Timer mode
• Adjustable mist output
• Soft multi-color LED ambience lighting plus candle light
• Control button with LED status indicator
• Low water protection
• Alarm beeper
Package Contents• 1 x TaoTronics Aroma Diffuser (Model: TT-AD003)
• 1 x Power Adapter
• 1 x Cup
• 1 x User Guide
Speci�cations
Model
Power Source
Power
Water Tank Volume
Working Time
Mist Output
Ultrasonic Frequency
TT-AD003
DC 24V 650mA
12W
300 mL / 10 oz
12 hours max
High Mist: 25 – 45 mL (0.9 – 1.6 oz) per hour
Low Mist: 15 – 25 mL (0.5 - 0.8 oz) per hour
2.35 - 2.45 MHz
01/02
Product Diagram
Mist Outlet
Tank Cover
Base
CANDLE Button
COLOR Button
HIGH/LOW Button
MIST Button
①
②
③
④
⑤
⑥
⑦
① Maximum Water ② Water Tank ③ Tank Cap
① Air Inlet ② DC Socket
①
②
③
④
CANDLE COLOR MISTHIGH/LOW
60 120 180 ON
⑤ ⑥ ⑦
Adding Water
- Remove the cover and the tank cap.
- Add up to 300 mL water into the water tank.
- Add 2 to 3 drops (0.1 to 0.15 mL) of essential oil into the water.
- Put the cover and cap back on.
How to Use
Connect the power adapter. The diffuser is now in standby status. Make sure there is enough water inside the tank. Use the CANDLE Button to control the candle light. Use the COLOR Button to control the color of the light. Use the MIST Button to set the mist timer and turn misting on/off, and the HIGH/LOW Button to adjust between high and low mist mode.
CANDLE Button
When the light is off or turned on in COLOR mode, press the CANDLE Button once (indicated by a beep sound) to activate a �ickering warm LED candle light. Press again and the candle light will turn solid, again indicated by a beep sound. Press and hold the CANDLE Button for 1.5 seconds to turn the candle light off.
When the candle light is turned on, press the COLOR Button (a beep sound will be heard) to switch to color lighting.
COLOR Button
• Press the COLOR Button once (a beep sound will be heard) to automatically cycle through different colors.
• Press the COLOR Button again to manually cycle through the different colors. Each color has a dim and bright tone. Press and hold the COLOR Button for 1.5 seconds to turn the color light off (two beep sounds will be heard).
HIGH/LOW Button
• The diffuser is set to high mist by default when turned on (two beep sounds). You can press the HIGH/LOW Button to switch to low mist (one beep sound).
MIST Button
• Press the MIST Button once to turn on the 60 minute mist timer (the corresponding LED indicator will light up in yellow). Keep pressing to cycle through the 120 minute timer, 180 minute timer, and ON. Each time you change the timer, there will be a beep sound. When set to “ON” mode, the unit will stay on until all water has been depleted. Press once again to turn off the misting (two beep sounds).
• You can also press and hold the MIST Button for 1.5 seconds to manually turn off the unit (one beep sound).
Important
- Do not exceed the max level when adding water.
- Stop using when water in the water tank is depleted.
- Do not power on when the lid is not properly covered.
- Use with essential oil and water together. Never use with essential oil only.
- Only use with natural essential oil. Synthesized essential oil may damage the product.
Cleaning the Water Tank
- Unplug the power cord and take off the tank cover and the tank cap.
- Drain any remaining water from the tank.
- Add some warm water into the tank and mix with detergent, wash with a cleaning cloth.
- Do not use corrosive detergent for cleaning.
Caution
- Please do not repair the product by yourself, always ask a professional electrician or authorized technician for repairs.
- If you smell a bad odor or anything unusual, please turn off the unit immediately.
- Please do not remove the power plug with wet hands as it may cause electrical shock.
- Do not place this unit on a slope or uneven surface to avoid water leaking or component damage.
- Do not put this unit near any heat source or under direct sunlight.
- Keep away from other electric appliances that are prone to humidity damage.
- Regularly clean the unit if it won’t be used for a long period; store in a dry and shady place.
- When plugged in, do not leave the diffuser unattended when there are children around.
03/04
③
②
①
①
② DC 24V
Adding Water
- Remove the cover and the tank cap.
- Add up to 300 mL water into the water tank.
- Add 2 to 3 drops (0.1 to 0.15 mL) of essential oil into the water.
- Put the cover and cap back on.
How to Use
Connect the power adapter. The diffuser is now in standby status. Make sure there is enough water inside the tank. Use the CANDLE Button to control the candle light. Use the COLOR Button to control the color of the light. Use the MIST Button to set the mist timer and turn misting on/off, and the HIGH/LOW Button to adjust between high and low mist mode.
CANDLE Button
When the light is off or turned on in COLOR mode, press the CANDLE Button once (indicated by a beep sound) to activate a �ickering warm LED candle light. Press again and the candle light will turn solid, again indicated by a beep sound. Press and hold the CANDLE Button for 1.5 seconds to turn the candle light off.
When the candle light is turned on, press the COLOR Button (a beep sound will be heard) to switch to color lighting.
COLOR Button
• Press the COLOR Button once (a beep sound will be heard) to automatically cycle through different colors.
• Press the COLOR Button again to manually cycle through the different colors. Each color has a dim and bright tone. Press and hold the COLOR Button for 1.5 seconds to turn the color light off (two beep sounds will be heard).
HIGH/LOW Button
• The diffuser is set to high mist by default when turned on (two beep sounds). You can press the HIGH/LOW Button to switch to low mist (one beep sound).
MIST Button
• Press the MIST Button once to turn on the 60 minute mist timer (the corresponding LED indicator will light up in yellow). Keep pressing to cycle through the 120 minute timer, 180 minute timer, and ON. Each time you change the timer, there will be a beep sound. When set to “ON” mode, the unit will stay on until all water has been depleted. Press once again to turn off the misting (two beep sounds).
• You can also press and hold the MIST Button for 1.5 seconds to manually turn off the unit (one beep sound).
Important
- Do not exceed the max level when adding water.
- Stop using when water in the water tank is depleted.
- Do not power on when the lid is not properly covered.
- Use with essential oil and water together. Never use with essential oil only.
- Only use with natural essential oil. Synthesized essential oil may damage the product.
Cleaning the Water Tank
- Unplug the power cord and take off the tank cover and the tank cap.
- Drain any remaining water from the tank.
- Add some warm water into the tank and mix with detergent, wash with a cleaning cloth.
- Do not use corrosive detergent for cleaning.
Caution
- Please do not repair the product by yourself, always ask a professional electrician or authorized technician for repairs.
- If you smell a bad odor or anything unusual, please turn off the unit immediately.
- Please do not remove the power plug with wet hands as it may cause electrical shock.
- Do not place this unit on a slope or uneven surface to avoid water leaking or component damage.
- Do not put this unit near any heat source or under direct sunlight.
- Keep away from other electric appliances that are prone to humidity damage.
- Regularly clean the unit if it won’t be used for a long period; store in a dry and shady place.
- When plugged in, do not leave the diffuser unattended when there are children around.
05/06
Warranty
This product is covered by the TaoTronics Product and Labor Warranty for 12 months from the date of its original purchase. If manufacturing defects occur, please contact TaoTronics support ([email protected]) immediately to launch a warranty claim. We will instruct you on how to return the defective unit back to us for repair or replacement. No return will be accepted without seller authorization
Statement
We can only provide after sale service for products that are sold by TaoTronics or TaoTronics authorized retailer and distributors. If you have purchased your unit from a different place, please contact your seller for return and warranty issues.
07/08
Troubleshooting Guide
Solution
Connect power adapter
Refer to the instructions
Add water into water tank
Power off and place in a well-ventilated area for 10 minutes
Get rid of some water
Clean the water tank as instructed
Cap on the cover properly
Move the unit to a well ventilated area
Clean water tank as instructed, use after air drying
Clean water tank as instructed, use clean water
Use natural essential oil
Problem
No mist coming out
Abnormal mist
Water leakage
Bad / strange smell
Cause
No power
Did not press the MIST Button
No water in water tank
The diffuser is getting too hot
Water exceeding max level
Stain built up inside water tank
Cover not properly covered
Temperature and humidity of environment is too high
Unit is new
Dirty water
Synthesized essential oil
Vielen Dank, dass Sie sich für den TaoTronics Aromazerstäuber mit Ultraschall entschieden haben. Bitte lesen Sie diese Bedienungsanleitung aufmerksam und bewahren Sie sie auf, falls Sie etwas nachlesen möchten. Falls Sie Fragen haben oder Hilfe benötigen, schreiben Sie bitte eine E-Mail an unseren Kundendienst unter [email protected].
DE
Eigenschaften
• Modernes, dekoratives Design
• Ultraschallzerstäuber
• Wählbare Laufzeit
• Einstellbarer Nebelausstoß
• Sanfte, mehrfarbige und stimmungsvolle LED-Beleuchtung + Kerzenlicht
• Steuerungstaste mit LED-Statusanzeige
• Schutzfunktion bei zu niedrigem Wasserstand
• Alarmsignal
Lieferumfang
• 1 x TaoTronics Aromazerstäuber (Modell: TT-AD003)
• 1 x Netzteil
• 1 x Becher
• 1 x Bedienungsanleitung
Spezi�kationen
Modell
Stromversorgung
Leistung
Wassertankvolumen
Betriebsdauer
Nebelausstoß
Ultraschallfrequenz
TT-AD003
DC 24 V 650 mA
12 W
300 mL
max. 12 Stunden
viel Nebel: 25 – 45 mL pro Stunde
wenig Nebel: 15 – 25 mL pro Stunde
2,35 – 2,45 MHz
09/10
Produktdiagramm
Nebeldüse
Wassertankabdeckung
Basis
CANDLE-Taste (Kerze)
COLOR-Taste (Farbe)
HIGH/LOW-Taste (VIEL/WENIG)
MIST-Taste (Nebel)
①
②
③
④
⑤
⑥
⑦
① Maximale Füllhöhe ② Wassertank ③ Tankdeckel
① Luftzu�uss ② Netzanschluss
①
②
③
④
CANDLE COLOR MISTHIGH/LOW
60 120 180 ON
⑤ ⑥ ⑦
Wasser einfüllen
- Entfernen Sie die Wassertankabdeckung und den Tankdeckel.
- Füllen Sie bis zu 300 mL Wasser in den Wassertank.
- Geben Sie 2 bis 3 Tropfen (0,1 bis 0,15 mL) ätherisches Öl ins Wasser.
- Bringen Sie den Tankdeckel und die Wassertankabdeckung wieder an.
Bedienung
Schließen Sie das Netzteil an. Der Zerstäuber ist jetzt im Stand-by-Modus. Kontrollieren Sie, ob genug Wasser im Tank ist. Mit der CANDLE-Taste stellen Sie das Kerzenlicht ein. Mit der COLOR-Taste stellen Sie die Lichtfarbe ein. Mit der MIST-Taste stellen Sie die Laufzeit oder schalten den Nebelausstoß ein und aus. Mit der HIGH/LOW-Taste wählen Sie zwischen viel und wenig Nebelproduktion.
11/12
③
②
①
①
② DC 24V
13/14
Kerze-TasteWenn das Licht aus oder im COLOR-Modus ist, drücken Sie einmal die CANDLE-Taste (bestätigt durch Tonsignal), um ein �ackerndes, warmes LED-Kerzenlicht einzuschalten. Ein weiteres Drücken beendet das Flackern zugunsten eines kontinuierlichen Leuchtens (bestätigt durch Tonsignal). Durch 1,5-sekündiges Drücken der CANDLE-Taste schalten Sie das Kerzenlicht aus.
Wenn das Kerzenlicht an ist, können Sie mit der COLOR-Taste die Farbe ändern(bestätigt durch Tonsignal).
Farbe-Taste
• Drücken Sie einmal die COLOR-Taste (bestätigt durch Tonsignal), damit die Farben automatisch wechseln.
• Drücken Sie die COLOR-Taste noch einmal, um manuell durch die Farben zu schalten. Jede Farbe hat einen dunklen und hellen Ton. Halten Sie die COLOR-Taste 1,5 Sekunden lang gedrückt, um die Farben auszuschalten (bestätigt durch Tonsignal).
Hoch/Niedrig-Taste
• Der Zerstäuber ist standardmäßig auf VIEL-Nebelausstoß eingestellt, wenn er eingeschaltet wird (bestätigt durch 2 Tonsignale). Durch Drücken der HIGH/LOW-Taste können Sie zum WENIG-Modus wechseln (bestätigt durch Tonsignal).
Nebel-Taste
• Drücken Sie die MIST-Taste einmal zum Aktivieren der 60-minütigen Laufzeit (die entsprechende LED leuchtet gelb auf). Wenn Sie die Taste gedrückt halten, kommen Sie zu 120 Minuten Laufzeit, danach zu 180 Minuten Laufzeit und schließlich zu EIN. Jede Änderung der Laufzeit wird durch ein Tonsignal bestätigt. Wenn Sie den Modus EIN wählen, läuft der Zerstäuber kontinuierlich, bis das Wasser verbraucht ist.Drücken wieder einmal, um den Nebelausstoß auszuschalten. (bestätigt durch 2 Tonsignale)
• Sie können die Einheit manuell ausschalten, indem Sie die MIST-Taste 1,5 Sekunden lang drücken (bestätigt durch 1 Tonsignale).
Wichtig
• Überschreiten Sie nicht die max Begrenzung, wenn Sie Wasser einfüllen.
• Verwenden Sie das Gerät nicht bei niedrigem Wasserstand
• Schalten Sie das Gerät nicht ein, wenn die Abdeckung nicht befestigt ist.
• Leeren Sie den Wassertank und bewahren Sie das Gerät an einem trockenem Ort auf, wenn Sie das Gerät für längere Zeit nicht benutzen sollten.
• Verwenden Sie ätherisches Öl und Wasser gemeinsam, niemals ätherisches Öl allein verwenden.
• Nur mit natürlichem ätherischen Ölen verwenden. Chemische Zusammensetzungen können das Gerät beschädigen.
Reinigung des Wassertanks
• Entfernen sie den Netzstecker und öffnen Sie den Deckel.
• Gießen Sie das verbleibende Wasser aus dem Tank
• Geben Sie warmes Wasser und etwas Reinigungsmittel in den Tank und waschen Sie Ihn mit einem Reinigungstuch aus.
• Verwenden Sie für die Säuberung keine ätzenden Reinigungsmittel.
Warnung
- Demontieren Sie das Gerät nicht selbst, wenden Sie sich für Reparaturen an professionelle Elektriker oder autorisierte Techniker;
- Sollte Ihnen ein übler Geruch oder irgendetwas Ungewöhnliches auffallen, verwenden Sie das Gerät nicht weiter.
- Berühren Sie den Netzstecker nicht mit nassen Händen, dies kann zu Stromschlägen führen.
- Kein Spielzeug, halten sie das Gerät von Kindern fern.
- Stellen Sie das Gerät nicht auf rutschige oder unebene Flächen, um Wasseraustritt oder Beschädigungen zu vermeiden.
Garantie
TaoTronics Produkte sind ab dem Kaufdatum durch die 12-monatige Garantie abgedeckt. Falls das Produkt während dieser Zeit defekt sein sollte, kontaktieren Sie bitte unverzüglich den Kundendienst.
Wir bieten unseren Kundendienst nur für Produkte an, die bei TaoTronics oder einem von TaoTronics autorisierten Händler und Vertriebsdienstleister gekauft wurden. Falls Sie Ihr Produkt bei einem anderen Händler gekauft haben, wenden Sie sich bezüglich des Garantieanspruchs an den Verkäufer.
15/16
Problembehandlung
Lösung
Verbinden Sie den Netzstecker mit einer Steckdose
Schalten Sie den Nebel ein, wie oben beschrieben
Füllen Sie Wasser in den Tank
Schalten Sie das Gerät aus und stellen Sie es für 10 Minuten an einem gut belüfteten Ort
Gießen sie etwas Wasser ab
Reinigen Sie den Wassertank wie beschrieben
Reinigen Sie den Lufteinzug
Problem
Es tritt keinNebel aus
Annormaler Nebelausstoß
Ursache
keine Stromversorgung
“Nebel” Schalter ist nicht aktiviert
Es ist kein Wasser im Tank
Überhitzungsschutz nach lang andauernder Nutzung
Das Wasser überschreitet die MAX Markierung
Im Wassertank bilden sich Flecken
Lufteinzug ist vom Staub blockiert
Verschließen Sie die Deckel korrekt
Stellen Sie das Gerät an einen gut durchlüfteten Ort
Reinigen Sie den Wassertank wie oben beschrieben, benutzen Sie das Gerät wenn es trocken ist
Reinigen Sie den Wassertank wie beschrieben, füllen Sie sauberesWasser ein
Benutzen Sie natürliches Aromaöl
Wasserschäden
Schlechter/eigenartiger Geruch
Die obere Abdeckung oder der Tankdeckel sind nicht richtig verschlossen
Temperatur und Luftfeuchtigkeit sind zu hoch
Neues Gerät
Wasser ist verschmutzt
Synthetisch ätherisches Öl
- Halten Sie das Gerät vor Hitze oder direkter Sonnenbestrahlung fern.
- Halten Sie den Luftbefeuchter von anderen elektrischen Haushaltsgeräten fern die anfällig gegen Feuchtigkeit sind.
- Reinigen Sie das Gerät wenn Sie es für längere Zeit nicht benutzen sollten und bewahren Sie es an einem trockenen dunklen Ort auf.
Merci d'avoir choisi le Diffuseur d'arômes ultrasonique TaoTronics. Veuillez lire attentivement ce manuel et le garder dans un endroit sûr pour vous y référer plus tard. Pour toute question ou doute, veuillez contacter notre service clientèle par email à l'adresse [email protected].
FR
Fonctionnalités
• Design d'intérieur contemporain
• Diffuseur ultrasonique
• Minuteur intégré
• Quantité de brume ajustable
• Lumières d'ambiance douces multi-couleurs à LEDs plus lampe bougie
• Boutons de commande avec témoins à LEDs
• Protection niveau d'eau bas
• Alarme-bippeur
Contenu du paquet
• 1 x Diffuseur d'arômes ultrasonique TaoTronics (Modèle: TT-AD003)
• 1 x Adaptateur secteur
• 1 x Gobelet
• 1 x Guide utilisateur
Spéci�cations
Modèle
Source d'alimentation
Puissance
Volume du réservoir
Autonomie
Brume en sortie
Fréquence ultrasonique
TT-AD003
DC 24V 650mA
12W
300 mL / 10 oz
12 heures max
Forte brume: 25 – 45 mL (0.9 – 1.6 oz) par heure
Faible brume: 15 – 25 mL (0.5 - 0.8 oz) par heure
2.35 - 2.45 MHz
17/18
Schéma du produit
Sortie de brume
Couvercle de réservoir
Base
Bouton BOUGIE
Bouton COULEUR
Bouton FORT/FAIBLE
Bouton BRUME
①
②
③
④
⑤
⑥
⑦
① Niveau maximum ② Réservoir d'eau ③ Bouchon de réservoir
① Entrée d'air ② Branchement DC
①
②
③
④
CANDLE COLOR MISTHIGH/LOW
60 120 180 ON
⑤ ⑥ ⑦
Ajouter de l'eau
- Retirer le couvercle et le bouchon de réservoir.
- Ajoutez jusqu'à 300 mL d'eau dans le réservoir.
- Ajoutez 2 à 3 gouttes (0.1 à 0.15 mL) d'huile essentielle dans l'eau.
- Remettez le bouchon et le couvercle en place.
Comment l'utiliser
Branchez l'adaptateur secteur. Le diffuseur est maintenant en mode veille. Assurez-vous qu'il y a suf�samment d'eau dans le réservoir. Utilisez le bouton CANDLE pour contrôler la lumière-bougie. Utilisez le bouton COLOR pour modi�er la couleur de la lumière. Utilisez le bouton MIST pour ajuster le minuteur et activer/désactiver la brume, et les boutons HIGH/LOW pour ajuster la quantité de brume.
19/20
③
②
①
①
② DC 24V
21/22
Bouton CANDLE
Quand la lumière est éteinte ou allumée en mode COLOR, appuyez sur le bouton CANDLE une fois (con�rmé par un bip sonore) pour activer une lumière d'ambiance type bougie à LEDs. Appuyez encore et la lampe bougie s'arrêtera de changer de luminosité, mode encore con�rmé par un bip sonore. Appuyez et maintenez le bouton CANDLE pendant 1.5 secondes pour désactiver la lampe bougie.
Quand la lumière est allumée, appuyez sur le bouton COLOR (un bip sonore se fera entendre) pour passer en lumière d'ambiance colorée.
Bouton COLOR
• Appuyez sur le bouton COLOR une fois (un bip sonore se fera entendre) pour faire dé�ler les différentes couleurs.
• Appuyez sur le bouton COLOR encore une fois pour faire dé�ler manuellement les différentes couleurs. Chaque couleur a un ton sombre et clair. Appuyez et maintenez le bouton COLOR pendant 1.5 secondes pour désactiver la lumière colorée (deux bips se feront entendre).
Boutons HIGH/LOW
• Le diffuseur est réglé sur brume intense par défaut (deux bips sonores). Vous pouvez utiliser le bouton HIGH/LOW pour passer en brume faible (un bip sonore).
Bouton MIST
• Appuyez sur le bouton MIST une fois pour activer le minuteur par défaut de 60 minutes (la LED correspondante s'allumera en jaune). Continuez à appuyer pour dé�ler les minuteurs à 120 minutes, 180 minuteurs et ON. A chaque changement de minuteur, un bip sonore se fera entendre. En mode “ON”, l'appareil restera allumé jusqu'à ce que toute l'eau soit consommée. Appuyez encore une fois pour éteindre la diffusion de brume (deux bips sonores).
• Vous pouvez aussi appuyer et maintenir le bouton MIST pendant 1.5 secondes pour désactiver manuellement l'appareil (un bip sonore).
Important
- Ne pas dépasser le niveau MAX quand vous rajoutez de l’eau
- Ne pas utiliser le diffuseur lorsque le réservoir d’eau devient vide
- Ne pas allumer le diffuseur lorsque le couvercle supérieur et le réservoir ne sont pas correctement couverts
- Videz le réservoir d'eau et réservez le diffuseur dans un endroit sec si vous ne l’utilisez pas
- Ajoutez de l'huile essentielle dans l'eau. Ne pas utiliser directement de l'huile essentielle sans diluer
- Utilisez uniquement l'huile essentielle naturelle avec le diffuseur; les huiles essentielles synthétisées l’endommageront
Nettoyage du réservoir d'eau
- Débranchez le cordon d’alimentation, dévisser le couvercle supérieur et le celui du réservoir
- Videz l'eau du réservoir
- Versez un peu d'eau tiède et de détergent dans le réservoir d’eau, le lavez avec une lavette nettoyante
- Ne pas utiliser de détergent corrosif pour le nettoyage.
Prudence
• Veuillez ne pas démonter le produit par vous-même et demandez toujours un électricien professionnel ou un technicien agréé pour la réparation
• Si vous sentez une mauvaise odeur ou remarquez quelque chose d’inhabituel, veuillez immédiatement éteindre l'appareil
• Veuillez ne pas retirer la prise d'alimentation avec les mains mouillées car cela pourrait causer un choc électrique
• Ceci n’est pas un jouet, veuillez le garder hors de la portée des enfants
Garantie
TaoTronics fournit une garantie limitée de 12 mois pour ce produit, à compter de la date d’achat initial. Si votre produit devenait défectueux, veuillez contacter l’équipe du Service Clients par email.
Nous ne pouvons fournir de service après-vente que pour les appareils vendus par TaoTronics ou un de ses distributeurs ou revendeurs autorisés. Si vous avez acheté votre appareil depuis un autre endroit, veuillez contacter le vendeur pour les questions de retour et de garantie.
23/24
Guide de dépannage
Solutions
Branchez l'adaptateur d'alimentation
Allumé l’appareil comme indiqué
Remplissez le réservoir d’eau
Éteignez le et placez le dans un endroit bien ventilé pendant 10 minutes
Enlevez un peu d’eau
Nettoyez le réservoir d'eau comme indiqué
Nettoyez l’entrée d’air
Problème
Pas de brume
Brumisation anormale
Les causes
Pas d'alimentation
L’intérupteur “BRUME” n’est pas allumé
Pas d’eau dans le réservoir
Protection contre le sur chauffage après une utilisation de longue durée
Eau dépassant leniveau Max
Saleté accumulée à l’intérieur du réservoir à eau
L'entrée d’air obstruée par la poussière
Placez le couvercle correctement
Déplacez l'appareil dans un endroit bien ventilé
Nettoyez le réservoir d'eau comme indiqué, et laissez sécher à l’air libre
Nettoyez le réservoir d'eau comme indiqué
Utilisez une huile naturelle aromatisée
Fuite d’eau
Mauvaise ou odeur étrange
Couvercle supérieur ou le couvercle du réservoir ne sont pas correctement fermés
Température et humidité d’ambiance trop élevées
Nouvel appareil
Eau sale
Huile essentielle synthétisée
• Ne placez pas cet appareil sur une surface pentue ou irrégulière a�n d’éviter toute fuite d'eau ou dommages à l’appareil
• Ne mettez pas cet appareil près d'une source de chaleur ou en plein soleil
• Tenir à l'écart des autres appareils électriques qui craignent l'humidité
• Nettoyez régulièrement le réservoir, si vous ne l’utilisez pas pendant une longue période, veuillez le ranger dans un endroit sec et à l’abri de la lumière
Gracias por elegir usted el Difusor ultrasónico de aromas de TaoTronics. Por favor, lea atentamente este manual y guárdelo en un lugar seguro para futuras consultas. Si usted tiene alguna pregunta o inquietud, por favor, póngase en contacto con nuestro equipo de atención al cliente por correo electrónico a [email protected].
ES
Características
• Con un diseño para la decoración de un hogar contemporáneo
• Difusor ultrasónico
• Con modo de temporizador
• Salida de vapor ajustable
• Con una iluminación ambiental LED multicolor suave, más luz de la vela
• Botón de control con indicador de estado LED
• Protección del agua baja
• Zumbador de alarma
Contenido del paquete
• 1 x Difusor de aroma de TaoTronics (Modelo: TT-AD003)
• 1 x Adaptador de corriente
• 1 x Copa
• 1 x Guía del usuario
Características Técnicas
Modelo
Fuente de alimentación
Potencia
Volumen del tanque de agua
Tiempo de trabajo
Salida del vapor
Frecuencia ultrasónica
TT-AD003
DC 24V 650mA
12W
300 mL / 10 oz
12 horas max
High Mist: 25 – 45 mL (0.9 – 1.6 oz) por hora
Low Mist: 15 – 25 mL (0.5 - 0.8 oz) por hora
2.35 - 2.45 MHz
25/26
Diagrama de producto
Salida del Vapor
Cubierta del tanque
Base
Botón VELA
Botón COLOR
Botón de ALTA / BAJA
Botón del Vapor
①
②
③
④
⑤
⑥
⑦
① Máxima Agua ② El tanque de agua ③ Tapa del tanque
① Entrada de aire ② Toma DC
①
②
③
④
CANDLE COLOR MISTHIGH/LOW
60 120 180 ON
⑤ ⑥ ⑦
La adición de agua
- Retirar la tapa y el tapón del depósito.
- Añadir hasta 300 ml de agua en el tanque de agua.
- Añadir 2 a 3 gotas (0,1 a 0,15 ml) de aceite esencial en el agua.
- Poner la cubierta y la cubierta de nuevo.
Cómo utilizarloConecte el adaptador a la corriente. El difusor se encuentra ahora en estado de espera. Asegúrese de que haya su�ciente agua en el interior del tanque. Use el botón de vela para controlar la luz de las velas. Use el botón de color para controlar el color de la luz. Use el botón de niebla para ajustar el temporizador de la niebla y girar la nebulización de encendido / apagado y el botón BAJA / ALTA para ajustar entre el modo de alto y bajo vapor.
27/28
③
②
①
①
② DC 24V
29/30
Botón VELA
Cuando la luz está apagada o encendida en el modo de color, pulse el botón VELA una vez (indicado por un pitido) para activar una cálida luz de las velas parpadeo del LED. Presione de nuevo y la luz de la vela a su vez, �ja, de nuevo indican mediante un pitido. Mantenga pulsado el botón VELA durante 1,5 segundos para encender la luz de la vela fuera.
Cuando la luz de la vela está encendida, pulse el botón de color (se oirá un pitido) para cambiar la iluminación de color.
Botón COLOR
• Pulsar el botón de color una vez (se oirá un pitido) para desplazarse automáticamente a través de diferentes colores.
• Pulsar el botón de color de nuevo para manualmente por los diferentes colores. Cada color tiene un tono oscuro y brillante. Mantenga pulsado el botón de color durante 1,5 segundos para encender la luz de color apagado (se escucharán dos pitidos).
Botón SUBIR/BAJAR
• El difusor se establece en alto vapor de forma predeterminada cuando se enciende (dos pitidos). Puede pulsar el botón SUBIR/BAJAR para cambiar a vapor bajo (un pitido).
Botón Vapor
• Pulse el botón Vapor una vez para encender el temporizador de 60 minutos de vapor (el indicador LED correspondiente se iluminará en amarillo). Mantenga presionado para desplazarse por el temporizador de 120 minutos, 180 minutos temporizador, y ON. Cada vez que cambie el contador de tiempo, habrá un pitido. Cuando se establece en el modo "ON", la unidad permanecerá encendida hasta que toda el agua se haya agotado.Pulse otra vez para apagar el vapor(dos sonidos de pitido).
• También puede mantener pulsado el botón Vapor durante 1,5 segundos para apagar manualmente la unidad (un sonido de pitido).
Importante
- No exceda el nivel máximo de agua al agregarla.
- No usar cuando el nivel del agua es bajo.
- No encienda el difusor cuando la cubierta no esté puesta.
- Vaciar el depósito de agua y guardar en un lugar seco cuando no se utilice.
- Utilizar siempre con aceite esencial y agua. Nunca lo utilice sólo con aceite esencial.
- Utilice sólo con aceite esencial natural. Los productos químicos podrían dañar el difusor.
Limpieza del depósito de agua:
1. Desconecte el cable de alimentación y retire la cubierta.
2. Vacíe el agua que pueda quedar en el depósito.
3. Agregue un poco de agua caliente en el depósito y mezclar con el detergente, lavar con un paño de limpieza.
4. No utilice detergentes corrosivos para su limpieza.
Precaución
- Por favor, no desmonte el producto usted mismo, siempre pida ayuda a un electricista profesional o a un técnico autorizado para su reparación.
- Si huele mal o enuentra algo inusual, por favor apague la unidad de inmediato.
- Por favor, no retire el enchufe de alimentación con las manos mojadas, ya que podría causar una descarga eléctrica.
- No es un juguete. Alé jase de los niños.
- No coloque esta unidad en pendiente o super�cie irregular para evitar fugas de agua o daños en los componentes.
- No coloque la unidad cerca de fuentes de calor o bajo la luz solar directa.
Garantía
TaoTronics ofrece una garantía limitada de 12 meses para este producto desde la fecha de compra original. Si su producto resulta defectuoso, póngase en contacto con nuestro equipo de atención al cliente por correo electrónico.
Sólo podemos ofrecer servicios de postventa de los productos que se venden por TaoTronics o TaoTronics autorizados minoristas y distribuidores. Si usted ha comprado su unidad desde un lugar diferente, por favor póngase en contacto con el vendedor directamente para cuestiones de retorno y de garantía.
31/32
Guía de solución de problemas
Solución
Conectar a la corriente
Consulte las instrucciones.
Añadir el agua en el depósito de agua.
Apáguelo y colocar en un lugar bien ventilado durante 10minutos.
Deshacerse de un poco de agua.
Limpie el depósito de agua de acuerdo con las instrucciones.
Limpiar con aire limpio.
Poner la tapa adecuadamente.
Mueva el difusor a una zona bien ventilada.
Problema
El Vapor no sale
Vapor anormal
Fuga de agua
Causas
No está enchufado
No he pulsado el botón “Vapor”.
No hay agua en el depósito de agua.
El difusor está demasiado caliente
Agua excede el nivel máximo.
Se han creado manchas en el interior del depósito de agua.
La entrada del aire está bloqueado por el polvo
No está adecuadamente tapado
La temperatura y la humedad del ambiente es demasiado alta.
Limpiar el depósito con agua limpia comose indica, secar al aire después de su uso
Usar en el depósito agua limpia segúnlas instrucciones.
Utilice el aceite esencial natural.
Olor malo o extraño
La unidad es nueva
Agua sucia
Aceite esencial sin tético
- Mantener alejado de otros aparatos eléctricos que son propensos a daños de humedad.
- Regularmente limpiar la unidad si no va a ser utilizado durante un largo período; almacenar en un lugar seco y oscuro.
Grazie per aver scelto il Diffusore di Aromi ad Ultrasuoni di TaoTronics. Vi invitiamo a leggere il seguente manuale con attenzione e a conservarlo per future consultazioni. Per ulteriore assistenza, contattare il nostro servizio clienti inviando una email al seguente indirizzo di posta elettronica [email protected].
I T
Caratteristiche
• Design Contemporaneo per l’Arredamento
• Diffusore ad Ultrasuoni
• Timer
• Flusso Vaporizzazione Regolabile
• Delicata illuminazione multicolore LED e luce effetto candela
• Tasto di controllo con indicatore LED
• Protezione basso livello dell’acqua
• Bip Allarme
Contenuto della Confezione
• 1 x Diffusore di Aromi di TaoTronics (Modello: TT-AD003)
• 1 x Adattatore
• 1 x Misurino
• 1 x Guida Utente
Speci�che Tecniche
Modello
Corrente Alimentazione
Corrente
Volume Tanica dell’Acqua
Autonomia
Vaporizzazione
Frequenza Ultrasuoni
TT-AD003
DC 24V 650mA
12W
300ml/10oz
12 ore max
Vaporizzazione Elevata: 25 – 45ml (0.9 – 1.6oz) per ora
Vaporizzazione Ridotta: 15 – 25ml (0.5 - 0.8oz) per ora
2.35 - 2.45MHz
33/34
Schema del Prodotto
Uscita Vapore
Guscio Protettivo
Base
Tasto CANDELA
Tasto COLORE
Tasto VAPORIZZAZIONEELEVATA/RIDOTTA
Tasto VAPORIZZAZIONE
①
②
③
④
⑤
⑥
⑦
① Livello Massimo dell’Acqua ② Tanica dell’Acqua ③ Tappo Tanica
① Ingresso Aria ② Presa DC
①
②
③
④
CANDLE COLOR MISTHIGH/LOW
60 120 180 ON
⑤ ⑥ ⑦
Aggiungere l’Acqua
- Rimuovere il guscio protettivo ed il tappo della tanica.
- Aggiungere 300ml di acqua.
- Aggiungere 2-3 gocce (0.1-0.15ml) di olio essenziale nell’acqua.
- Rimettere tappo e guscio protettivo.
Funzionamento
Connettere l’adattatore. Il diffusore è automaticamente in standby. Assicurarsi che vi sia acqua a suf�cienza nella tanica. Utilizzare il Tasto CANDELA per controllare la luce CANDELA. Utilizzare il tasto COLORE per controllare il colore della luce. Tasto VAPORIZZAZIONE per impostare il timer del getto di vapore ed accenderlo/spegnerlo. Utilizzare il tasto di VAPORIZZAZIONE ELEVATA/RIDOTTA per scegliere l’intensità del getto di vapore.
35/36
③
②
①
①
② DC 24V
37/38
Tasto CANDELA
Quando la luce è spenta o in modalità COLORE, premere il tasto CANDELA una volta (si sentirà un bip) per attivare una luce LED tremolante ad effetto candela. Premere nuovamente perché la luce candela diventi �ssa (si sentirà un bip). Premere e tenere premuto il tasto CANDELA per 1.5 secondi per spegnere la luce CANDELA.
Quando la luce candela è accesa, premere il tasto COLORE (si sentirà un bip) per cambiare il colore della luce.
Tasto COLORE
• Premere il tasto COLORE una volta (si sentirà un bip) per passare in rassegna le diverse colorazioni disponibili.
• Premere nuovamente il tasto COLORE per passare da un colore all’altro manualmente. Ogni colore prevede un tono più o meno acceso. Premere e tenere premuto il tasto COLORE per 1.5 secondi per spegnere la luce colorata (si sentiranno due bip).
Tasto VAPORIZZAZIONE ELEVATA/RIDOTTA
• Il diffusore è inizialmente impostato per emettere una vaporizzazione a flusso elevato quando acceso (si sentiranno due bip). Premere il tasto di VAPORIZZAZIONE ELEVATA/RIDOTTA per passare ad un getto ridotto (si sentirà un bip)
Tasto VAPORIZZAZIONE
• Premere il tasto di VAPORIZZAZIONE una volta per attivare il timer da 60 minuti (l’indicatore LED corrispondente si accenderà in giallo). Premere nuovamente per passare al timer da 120 minuti, 180 minuti e SEMPRE ACCESO. Si sentirà un bip ogni volta che si cambia il timer. Quando impostato su SEMPRE ACCESO, il diffusore funzionerà ininterrottamente �no a che l’acqua non si sia esaurita. Premerlo nuovamente per spegnere il diffusore (si sentiranno due bip).
• Premere e tenere premuto il tasto di VAPORIZZAZIONE per 1.5 secondi per spegnere manualmente il diffusore (si sentiranno un bip).
Importante
- Non eccedere il livello massimo di acqua nel serbatoio.
- Interrompere l'uso quando il livello di acqua nel serbatoio è basso.
- Non accendere il diffusore senza cover.
- Svuotare il serbatoio e conservare in un luogo asciutto quando non si utilizza.
- Utilizzare con oli essenziali e acqua. Non aggiungere solamente oli essenziali senza acqua.
- Utilizzare solo oli essenziali naturali. Sintesi chimiche potrebbero danneggiare il prodotto.
Come Pulire l'Acqua del Serbatoio
- Staccare il cavo di alimentazione e rimuovere la cover.
- Drenare ogni traccia di acqua residua dal serbatoio.
- Aggiungere acqua nel serbatorio mista a detergente, pulire con un panno.
- Non utilizzare detergenti corrosivi per la pulizia.
Avvertenze
• Si prega di non smontare il prodotto in maniera autonoma. Per la riparazione dell'umidi�catore, rivolgersi sempre a personale quali�cato.
• In caso di cattivo odore o funzionamento inusuale, spegnere immediatamente l'umidificatore.
• Al fine di evitare shock elettrici, si prega di non toccare la presa di alimentazione con le mani bagnate.
• L'umidificatore non è un giocattolo. Si prega di tenere lontano dalla portata dei bambini.
• Per evitare perdite d'acqua o danneggiamenti ai componenti, non collocare l'umidificatore su super�ci inclinate o irregolari.
• Non collocare vicino sorgenti di estremo calore o esporre ai raggi diretti del sole.
• Tenere lontano da altri apparecchi elettronici soggetti a rischio di danni dovuti ad umidità.
Garanzia
TaoTronics fornisce per questo prodotto, una garanzia limitata di 12 mesi dalla sua data d'acquisto. In caso di difetti del prodotto, si prega di contattare via email il nostro team di supporto clienti.
Forniamo servizio di post vendita esclusivamente per prodotti venduti da TaoTronics o da distributori e rivenditori autorizzati TaoTronics. Se acquistati da terzi, vi invitiamo a rivolgervi al vostro venditore per casi attinenti alla restituzione del prodotto e questioni sulla garanzia.
39/40
Guida Soluzione dei Problemi
Soluzione
Collegare ad un adattatore
Fare riferimento alle Istruzioni
Aggiungere acqua nel serbatoio
Spegnere e collocare in un luogo ventilato per 10 minuti
Rimuovere l'acqua in eccesso
Pulire il serbatoio come da istruzioni
Pulire la presa d'aria
Posizionare la cover in maniera corretta
Spostare l'unità in un’area ben ventilata
Problema
Mancanza di Vapore
Vaporizzazione Irregolare
Perdita d'Acqua
Cause
Diffusore non alimentato
Non è stato premuto il tasto “MIST”
Mancanza d'acqua nel serbatoio
Il diffusore si sta surriscaldando
Acqua in eccesso
Filtrare il serbatoio
Presa d'aria bloccata dalla polvere
Cover non sistemata correttamente
Temperatura e umidità dell'ambiente troppo alta
Pulire il serbatoio come da istruzioni, utilizzare dopo aver asciugato a freddo
Pulire l'acqua del serbatoio come da istruzioni, utilizzare acqua pulita
Utilizzare solamente oli essenziali naturali
Strano/cattivo odore
Nuova unità
Acqua sporca nel serbatoio
Oli essenziali sintetizzati
• Pulire regolarmente l'unità se non si utilizza per un lungo periodo e conservare in un luogo asciutto e riparato.
この度はTaoTronics超音波アロマディフューザーをお買い上げ頂きまして誠にありがとうございます。 こちらの取扱説明書をよくお読みになり、正しく安全にお使いください。何かありましたら、弊社カスタマーサポート[email protected]にお気軽にご連絡ください。
JP
特徴• インテリアに馴染むコンテンポラリーデザイン• 超音波ディフューザー• タイマー付• ミストの調整可能• 優しいマルチカラー LEDライト 雰囲気のあるキャンドルライト • コントロールボタン LEDインジケーター付• 空焚き防止機能 • ビープ機能付
セット内容• 1 x TaoTronics アロマディフューザー (型番: TT-AD003)• 1 x 電源アダプター • 1 x カップ• 1 x 取扱説明書
仕様書
型番
電源
電力
水タンク容量
連続動作時間
加湿能力
超音波周波数
TT-AD003
DC 24V 650mA
12W
300 mL / 10 oz
最大 12 時間
最高: 1時間 25 ~ 45 mL 最低: 1時間 15 ~ 25 mL
2.35 - 2.45 MHz
41/42
製品図ミスト出力
タンクカバー
土台
キャンドルボタン
カラーボタン
高/低ボタン
ミストボタン
①
②
③
④
⑤
⑥
⑦
① 水の最高ライン ② 水タンク ③ タンクキャップ
① 吸気口 ② 電源差し込み口
①
②
③
④
CANDLE COLOR MISTHIGH/LOW
60 120 180 ON
⑤ ⑥ ⑦
水を入れる- カバーを取り、タンクキャップをとります。.
- 300 mL の水をタンクの中に入れます。
- エッセンシャルオイルを2-3滴 (0.1 to 0.15 mL) 入れます。
- キャップとカバーを元にもどします。
使い方電源アダプターにつなぎます。これでアロマディフューザーはスタンバイ状態になりました。水がしっかり入ってることを確認してください。キャンドルボタンは、キャンドルライトをコントロールするものです。カラーボタンは色を調整します。ミストボタンは、ミストの電源ON/OFFだけでなくタイマー設定でもあります。高/低ボタンは、ミストの強さの切替ができます。
43/44
③
②
①
①
② DC 24V
45/46
キャンドルボタンライトがついていても、消えていても、キャンドルボタンをONにすると(ビープ音が1度します)揺らめいて温かみのあるキャンドルライトがつきます。もう一度押すと、ビープ音と共に、明かりは固定されます。さらに1.5秒長押しすると、ビープ音と共に消灯します。
キャンドルライトがついている時に、カラーライトを押す(ビープ音がします)と、カラーライトになります。
カラーボタン• カラーボタンを一度押します。(ビープ音がします) 自動的に様々な色のLEDがイルミネーションのように輝きます。
• 続いてカラーボタンを押すことに、順番に色が変わって、固定の色で明るさの変化によるイルミネーションになります。1.5秒カラーボタンを長押しするとライトは消えます。(2回ビープ音がします)。
高/低 ボタン• ミストは最初は高い出力に設定されています。 (ビープ2回). 高/低ボタンを押して 少ないミストにすることができます (ビープ1回)。
ミストボタン• ミストボタンを1度押すと60分のミストタイマーが起動します。 (対応インジケーターが黄色に点灯します)。 押し続けることで120分、180分とタイマーは循環します。変更される度にビープ音が鳴ります。ONモードは水が無くなるまでミストが出続けます。もう一回押すとミストが消えます。(ビープ音が2回鳴ります)
• 1.5秒長押しすると電源を切れます。(ビープ音が1回鳴ります)
重要• 水を入れる時は最大レベルを超えないようにしてください。
• 水タンクが空になった場合は、使用を中止してください。
• フタがちゃんと覆われていない時は、電源を入れないでください。
• エッセンシャルオイルだけで使うのは絶対にお止めください。必ず水に数滴入れて使うようにしてください。
• エッセンシャルオイルは天然のものをお使いください。合成されたエッセンシャルオイルは機械に影響が出る場合があります。
水タンクの清掃• 電源コードを抜いてタンクカバーとタンクキャップを外します。.
• タンクの中に残った水を総て捨てます。
• タンクの中に温かいお湯を入れて少し洗剤を入れてクロスで洗います。
• 腐食性の洗剤は使用しないようにしてください。
注意- 自分で修理しないでください。必ず資格のある技術者か、プロの電技技術者に依頼してください。
- 異臭など異常を感じた場合は、すぐに電源を落とします。
- 濡れた手で電源を使わないように、電気ショックが起こるかもしれません。
- 傾斜がある場所や、凸凹した場所で使わないでください。水がこぼれたり、機械が壊れることがあります。
- 直射日光の当たる場所など熱の高くなる場所に放置しないようにしてください。
- 湿気によりダメージを受ける電気機器等の側で使わないようにしてください。
- 長期にわかって使わない時は内部を清掃し、乾燥した状態にして涼しい場所に保管します。
- 子どもの近くで使う場合は、側を離れないようにしてください。
Troubleshooting Guide
解決策
電源を確認し、しっかりと差し込みます。
ミストボタンの説明を参照
水を入れます
電源を切って、10分ほど通気のよい場所に放置します。
少し減らしてください
説明書を参照して清掃します。
カバーをキチンと閉めます。
風通しのいい場所に移動します。
水タンクを説明どおりに清掃し、乾かしてから、お使いください。
水タンクを説明どおりに清掃し、キレイな水を入れてください。
天然のエッセンシャルオイルを使用してください。
問題
ミストが出ません
ミストがおかしい
水漏れ
悪い/ おかしな臭い
原因
電源が入っていない
ミストボタンを押してない
タンクに水がない
ディフューザーが高温になっている
水が多すぎる
水タンクの中が汚れている
カバーがちゃんと閉まってない
環境的に温度と湿度が高い
ユニットが新しい
水が汚い
合成のエッセンシャルオイルである
47
安心保証本製品はご購入日から12カ月の安心保障をご提供いたします。万が一、商品不具合のようでしたら、ぜひ弊社までご連絡ください。商品状況に応じて返品、交換、修理及び返金と対応させていただきます。
TaoTronicsに販売の権限を授けられた販売業者から購入された場合のみTaoTronicsアフターサービスをご提供いたします。