PHASED ARRAY (PAUT) Phased array instruments produce accurate, detailed cross-sectional pictures of internal structures at fast inspection speeds. Phased array technology uses multiple ultrasonic elements and electronic time delays to create beams that can be focused electronically for fast inspection, full data storage, and multiple angle inspections. Phased array technology provides precise measurement with the most reliable results.Phased Array applications include manual and manual encoded weld scanning. Encoded scans offer extremely accurate sizing of weld flaws along with cross sectional and planar views of the entire encoded scan area.

Automated ID Corrosion MappingPAUT corrosion mapping systems

utilize 64 transducer elements, versus conventional corrosion mapping

systems which typically have only one. This provides the accuracy of PAUT

with an acquisition speed five times faster than conventional systems.

NON-DESTRUCTIVE EXAMINATION

FAST™

(Flaw Analysis and Sizing Technique) is an innovative technology that has been developed to allow for reliable ultrasonic inspection in a variety of components, materials, and thicknesses.

FAST™ is an innovative way to use a longitudinal wave to do both detection and sizing of flaws.

The most outstanding feature of FAST™ is the significant reduction of false calls while maintaining very high levels of detection.

FAST™ has been successfully applied to:

• PDI qualified pipeline integrity examinations

• Through-wall sizing of planar flaws• Stress Corrosion Cracking sizing• Heat exchanger tube welds

• Boiler tube welds• Single side access S/S

examinations• Thin-wall crack detection

TU

LSA

IN

SPEC

TIO

N RESOURCES NON DESTRUCTIVE EX

AM

INA

TIO

N

A C

YPRESS ENERGY PARTNERS CO

MPA

NY

QUEST®

(Quality Ultrasonic Examination and Sizing Technology) is an enhanced or automated version of FAST™ and, when applied allows for less expensive and more reliable inspection of pipeline welds.When QUEST™ UT is utilized, the entire weld volume is examined in one scan, and many flaw sizes and shapes can be obtained. With QUEST®, there is no limitation

on thin-walled material and only one side of the weld is needed for scanning. QUEST® can accurately depth size long seam OD cracking found after Magnetic Particle examination. Detection, characterization, through-wall sizing and length sizing are done during the detection scan with no changes necessary in setup parameters or equipment.

Randall Lorett President, CEO 918-477-8400 rlorett@tulsainspection.comRon Ledingham Chief Operating Officer 918-477-8488 rledingham@tulsainspection.comTim Roberts Director, Business Operations 918-477-8494 troberts@tulsainspection.comJim Crawford Manager, HSE & Development 918-477-8404 jcrawford@tulsainspection.comRichard Grogan Vice President, Integrity 918-477-8449 rgrogan@tulsainspection.comChris Hartnell Manager of Pipeline Integrity 918-477-8419 chartnell@tulsainspection.com

P: 918-274-1100 • F: 918-274-1102www.tulsainspection.com

OD ANOMALY ASSESSMENTThe Creaform laser scanner and Pipecheck software combine to provide extremely accurate (up to 50 micron) and repeatable results with acquisition speeds up to 80 times faster than manual pit depth gauging.Corrosion - the Pipecheck corrosion module offers very fast and reliable data processing that generates instant, on-site results. In comparison with traditional measurement methods, this software offers accuracy and repeatability that are beyond expectations.Mechanical Damage - the Pipecheck mechanical damage module has been developed specifically for pipeline mechanical damage analysis. This module features numerous key functionalities that increase dent understanding and facilitate the decision making process.Corrosion in Mechanical Damage - Pipecheck software is the one and only solution on the market to offer sophisticated tools able to extract corrosion depth that is located within a mechanical damage. This confidence will result in lower maintenance cost and reduced risk of costly failure.

P: 918-274-1100 • F: 918-274-1102www.tulsainspection.com

Three step process to accurate and reliable data:Scan Analyze Report

• High resolution capture of all corroded areas• Fast surface acquisition to increase efficiency• Improved scanning performance for small features such as pitting

•Feature detection using real pipe geometry•Automatically applied interaction rules•Estimated burst pressure calculation•Enhanced virtual pit gauge capabilities near welds and obstacles

•Reports includes worst-case-profile and predicted failure path•Export to CSV available for further analysis•Mesh export available•Customizable pass/fail criteria•Snapshot tool for 3D reporting

TU

LSA

IN

SPEC

TIO

N RESOURCES NON DESTRUCTIVE EX

AM

INA

TIO

N

A C

YPRESS ENERGY PARTNERS CO

MPA

NY

TULS

A INSPECTION RESOURC

ES

A C

YPRESS ENERGY PARTNERS C

OM

PAN

Y