non-contact safety system ces-az accessories.pdf · non-contact safety system ces-az subject to...
TRANSCRIPT
![Page 1: Non-Contact Safety System CES-AZ accessories.pdf · Non-Contact Safety System CES-AZ Subject to technical modifications; no responsibility is accepted for the accuracy of this information](https://reader036.vdocuments.us/reader036/viewer/2022071011/5fc9f1a494ed0b55166f4af1/html5/thumbnails/1.jpg)
58
Non-Contact Safety System CES-AZ
Subject to technical modifications; no responsibility is accepted for the accuracy of this information.
26
30
64
56
16 25
40
34
40
6,1
84
8
M
11,5
45
15
7,5
11,5
41,5
6411
,5
37
6,1
4
56
64
4537
30
44
4
5
Dimensiondrawing
ForreadheadCEM-A-LE05...andac-tuatorCEM-A-BE05...Materialstainlesssteel
MountingplateEMP-L-CEM05For read head CEM-A-LE05...
Orderingtable
Designation Use Orderno/item
MountingplateEMP-L-CEM05 ForreadheadCEM-A-LE05... 099425EMP-L-CEM05
MountingplateEMP-B-CEM05 ForactuatorCEM-A-BE05... 100110EMP-B-CEM05
MountingplateCEM
M5 - 4x
8349
58
4012
17
42,5
4
4
14
20
33,5
41,5
42,5
6065,2
44,4
6,1
6,1
MountingplateEMP-B-CEM05For actuator CEM-A-BE05...
2 x M6
2 x M6
2 x M5
Sicherheitsschrauben M5(im Lieferumfang von Lesekopf und Betätiger)Safety screws M5(included in delivery of readhead and actuator)
Standard Alu-ProfilStandard aluminium profile(30-45 mm)
4 x M6
Sicherheitsschrauben M5(im Lieferumfang von Lesekopf und Betätiger)Safety screws M5(included in delivery of readhead and actuator)
Standard Alu-ProfilStandard aluminium profile (30-45 mm)
4 x M6
InstallationexamplemountingplatesEMP-.-CEM05
Hinged door Sliding door
![Page 2: Non-Contact Safety System CES-AZ accessories.pdf · Non-Contact Safety System CES-AZ Subject to technical modifications; no responsibility is accepted for the accuracy of this information](https://reader036.vdocuments.us/reader036/viewer/2022071011/5fc9f1a494ed0b55166f4af1/html5/thumbnails/2.jpg)
64
Non-Contact Safety System CES-AZ
Subject to technical modifications; no responsibility is accepted for the accuracy of this information.
Connectioncableswithplugconnectors
1 (BN)4 (WH)
3(Schirm/Screen)
2 (NC)
6
7,5
27,5
30
3,7
“l”
forCES-A-LSP-..SBstraight, M5 socket, 3-pin
Orderingtable
Use Plugconnector Cabletype Cablelength[m] Orderno/item
ForReadheads
CES-A-LSP-..SBStraight V
Cable PVC
5 105555C-M05F03-02X014PV05,0-ES-105555
10 105556C-M05F03-02X014PV10,0-ES-105556
20 105559C-M05F03-02X014PV20,0-ES-105559
ForreadheadswithM5plugconnector
Technicaldata
ParameterValue
Unitmin. typ. max.
Plug connector 3-pin M5 female plug, straight
Connection type Screw terminal, knurled nut not connected to cable screen
Conductor cross-section 2 x 0.14 screened mm²
Material, outer sheath PVC ∅ 3.7 mm mm
Cable length Max. 25 (taking into account the switching distance) m
Dimensiondrawing
View of con-nection side
Crim
ped
ferr
ules
![Page 3: Non-Contact Safety System CES-AZ accessories.pdf · Non-Contact Safety System CES-AZ Subject to technical modifications; no responsibility is accepted for the accuracy of this information](https://reader036.vdocuments.us/reader036/viewer/2022071011/5fc9f1a494ed0b55166f4af1/html5/thumbnails/3.jpg)
65
Non-Contact Safety System CES-AZ
Subject to technical modifications; no responsibility is accepted for the accuracy of this information.
"l"
∅4,631
22,5
∅10
30
ForCES-A-L.../CEM-A-L.../CET-AXStraight, M8 socket, 3-pin
"l"
∅4,6
30
10
18,5
26,5
∅10
ForCES-A-L.../CEM-A-L.../CET-AXAngled, M8 socket, 3-pin
Orderingtable
Use Plugconnectors Cabletype Cablelength[m] Orderno/item
ForreadheadsCES-A-L.../CEM-A-L.../
CET-AX-L...-SC
Straight VCable PVC
3 0779�5C-M08F03-02X025PV03,0-ZN-077935
5 07779�C-M08F03-02X025PV05,0-ZN-077793
10 077767C-M08F03-02X025PV10,0-ZN-077767
20 077716C-M08F03-02X025PV20,0-ZN-077716
25 077717C-M08F03-02X025PV25,0-ZN-077717
Straight PCable PUR
5 084762C-M08F03-02X025PU05,0-ZN-084762
10 08476�C-M08F03-02X025PU10,0-ZN-084763
15 084764C-M08F03-02X025PU15,0-ZN-084764
20 084765C-M08F03-02X025PU20,0-ZN-084765
25 084766C-M08F03-02X025PU25,0-ZN-084766
AngledV
Cable PVC
10 084701C-M08F03-02X025PV10,0-ZN-084701
25 099998C-M08F03-02X025PV25,0-ZN-099998
PCable PUR 10 098590
C-M08F03-02X025PU10,0-ZN-098590
Crim
ped
ferr
ules
Crim
ped
ferr
ules
ForreadheadswithM8plugconnector
Technicaldata
ParameterValue
Unitmin. typ. max.
Plug connectors 3-pin M8 female plug, straight
Connection type Screw terminal, knurled nut not connected to cable screen
Conductor cross-section 2 x 0.25 screened mm²
Material, outer sheath PVC ∅ 4.6 or PUR ∅ 4.8 (PUR cables are suitable for drag chains) mm
Cable length Max. 25 (taking into account the switching distance) m
Dimensiondrawing
1 (BN)
3 (WH)
4 Schirm/Screen
View of connection
side
1 (BN)
3 (WH)
4 Schirm/Screen
View of connection
side
![Page 4: Non-Contact Safety System CES-AZ accessories.pdf · Non-Contact Safety System CES-AZ Subject to technical modifications; no responsibility is accepted for the accuracy of this information](https://reader036.vdocuments.us/reader036/viewer/2022071011/5fc9f1a494ed0b55166f4af1/html5/thumbnails/4.jpg)
66
Non-Contact Safety System CES-AZ
Subject to technical modifications; no responsibility is accepted for the accuracy of this information.
"l"
∅5
31
22,5
∅10
30
Dimensiondrawing
ForsolenoidoperatingvoltagereadheadCEM/CET-AXStraight, M8 plug, 4-pin
"l"
∅5
30
10
18,5
26,5
∅10
ForsolenoidoperatingvoltagereadheadCEM/CET-AXAngled, M8 plug, 4-pin
Orderingtable
Use Plugconnectors Cabletype Cablelength[m] Orderno/item
Forsolenoidoperatingvoltage
readheadsCEM-A-L.../
CET-AX-L...-SC
Straight VCable PVC
5 08881�C-M08F04-04X025PV05,0-ZN-088813
10 088814C-M08F04-04X025PV10,0-ZN-088814
15 088815C-M08F04-04X025PV15,0-ZN-088815
25 0950�5C-M08F04-04X025PV25,0-ZN-095035
50 097100C-M08F04-04X025PV50,0-ZN-097100
Angled VCable PVC 10 08470�
C-M08F04-04X025PV10,0-ZN-084703
Crim
ped
ferr
ules
Crim
ped
ferr
ules
4 (BK) 2 (WH)
1 (BN)3 (BU)
View of connection side
8
6
1 (BN)
2 (WH)4 (BK)
3 (BU)
View of connection side
Technicaldata
ParameterValue
Unitmin. typ. max.
Plug connectors 4-pin M8 female plug
Connection type Screw terminal
Conductor cross-section 4 x 0.25 mm²
Material, connector housing PUR black
Material, outer sheath PVC ∅ 5.0 mm
Material, union nut CuZn nickel-plated
Bending radius Min. 70 mm
Connectioncableswithplugconnectors
![Page 5: Non-Contact Safety System CES-AZ accessories.pdf · Non-Contact Safety System CES-AZ Subject to technical modifications; no responsibility is accepted for the accuracy of this information](https://reader036.vdocuments.us/reader036/viewer/2022071011/5fc9f1a494ed0b55166f4af1/html5/thumbnails/5.jpg)
67
Non-Contact Safety System CES-AZ
Subject to technical modifications; no responsibility is accepted for the accuracy of this information.
"l"
3037
31
M8x1
Dimensiondrawing
ForLEDdisplayreadheadCEM-A-LH10...Straight, M8 female plug, 4-pin
"l"
50
M8x
1
13,6
24,85
26,5
26,5
ForLEDdisplayreadheadCEM-A-LH10...Angled, M8 female plug, 4-pin
Orderingtable
Use Plugconnectors Cabletype Cablelength[m] Orderno/item
ForLEDdisplayreadheadCEM-A-LH10...
Straight VCable PVC
2 088841C-M08M04-04X025PV02,0-ZN-088841
5 088842C-M08M04-04X025PV05,0-ZN-088842
10 08884�C-M08M04-04X025PV10,0-ZN-088843
15 088844C-M08M04-04X025PV15,0-ZN-088844
Angled VCable PVC 10 084705
C-M08M04-04X025PV10,0-ZN-084705
4 (BK)2 (WH)
1 (BN) 3 (BU)
4 (BK)2 (WH)
1 (BN) 3 (BU)
8,8
View of connection side
View of connection side
Technicaldata
ParameterValue
Unitmin. typ. max.
Plug connectors 4-pin M8 female plug
Connection type Screw terminal
Conductor cross-section 4 x 0.25 mm²
Material, connector housing PUR black
Material, outer sheath PVC ∅ 5.0 mm
Material, union nut CuZn nickel-plated
Bending radius Min. 10 x sheath diameter mm
![Page 6: Non-Contact Safety System CES-AZ accessories.pdf · Non-Contact Safety System CES-AZ Subject to technical modifications; no responsibility is accepted for the accuracy of this information](https://reader036.vdocuments.us/reader036/viewer/2022071011/5fc9f1a494ed0b55166f4af1/html5/thumbnails/6.jpg)
68
Non-Contact Safety System CES-AZ
Subject to technical modifications; no responsibility is accepted for the accuracy of this information.
Connectioncableswithplugconnectors
12
3
4
5
6
7
8
BN
WH
∅ 6
∅ 14,5
"l"
M12 x 1
10,5
ForCET...Straight/angled, M12 socket, 8-pin
Orderingtable
Use Sheath Plugconnectors Cablelength[m] Orderno.
ForCET...
PVC
Straight
10 0996��C-M12F08-07X025PV10,0-MA-099633
20 0996�4C-M12F08-07X025PV20,0-MA-099634
25 10�115C-M12F08-07X025PV25,0-MA-103115
Angled
10 100456C-M12F08-07X025PV10,0-MA-100456
20 105071C-M12F08-07X025PV20,0-MA-105071
PUR Straight
10 102218C-M12F08-07X025PU10,0-MA-102218
25 10�782C-M12F08-07X025PU25,0-MA-103782
View of connection side
ForreadheadswithM12plugconnector
These special connection cables are needed for the connection of the CET to a CES evaluation unit. Please take into account in the order!Interference is prevented by special screening.
ImportantConnection cables are not allowed to be ex-tended.
NoteThe connection cables with PUR sheath are suit-able for drag chains with a minimum bending radius of 60mm (10 times the cable diameter).
Screen connected to pin 3
Dimensiondrawing
BN
Screen
YE
RD GY
PK
BU
WH
![Page 7: Non-Contact Safety System CES-AZ accessories.pdf · Non-Contact Safety System CES-AZ Subject to technical modifications; no responsibility is accepted for the accuracy of this information](https://reader036.vdocuments.us/reader036/viewer/2022071011/5fc9f1a494ed0b55166f4af1/html5/thumbnails/7.jpg)
69
Non-Contact Safety System CES-AZ
Subject to technical modifications; no responsibility is accepted for the accuracy of this information.
∅19
Pg9
∅19
,5
Pg9
SW16SW1644
106
62
Dimensiondrawing
PlugconnectorforextendingtheconnectioncableForreadheadsCES-A-L.../CEM-A-L...
Using EUCHNER couplings / plug connectors, the user can cut the read head cable to size on site at any point and connect the couplings / plug connectors.
NoteThe connection cable for the read head can only be extended using these self-assembly couplings / plug connectors under the following conditions:
The total maximum cable length is 25 m, taking into account the switch-on distance.The cable specified by EUCHNER must be used for the extension (screened, conductor cross-section 2 x 0.25 mm²).The plug connector housing must be electri-cally isolated from the machine ground.
Couplingsocket3-pin + PE
Inserted
Plugconnectorsandconnectionset
Femaleplug3-pin + PE
Coupling socket Female plug
12
3
View connection side female plug
1 = BN H13 = WH H2
y SH (screen)
Orderingtable
Designation Type Orderno/item
KD4C18513-pin + PE Coupling socket for female plug BS4C1851 0774�4
KD4C1851
BS4C18513-pin + PE Female plug for coupling socket KD4C1851 0774�5
BS4C1851
Technicaldata
ParameterValue
Unitmin. typ. max.
Housing material CuZn, matt chromium-plated
Degree of protection according to EN 60529 IP65 (inserted)
Plug-inscrewterminalsforevaluationunitsCES-AZCoded
Orderingtable
Designation Type Orderno/item
Connectionsetfor evaluation unit CES-AZ-.ES-01B
Plug-in screw terminals
104756CES-EA-TC-AK04-104756
Connectionsetfor evaluation unit CES-AZ-.ES-02B
Plug-in screw terminals
104771CES-EA-TC-AK06-104771
Connectionsetfor evaluation unit CES-AZ-.ES-04B
Plug-in screw terminals
104776CES-EA-TC-AK08-104776
![Page 8: Non-Contact Safety System CES-AZ accessories.pdf · Non-Contact Safety System CES-AZ Subject to technical modifications; no responsibility is accepted for the accuracy of this information](https://reader036.vdocuments.us/reader036/viewer/2022071011/5fc9f1a494ed0b55166f4af1/html5/thumbnails/8.jpg)
70
Non-Contact Safety System CES-AZ
Subject to technical modifications; no responsibility is accepted for the accuracy of this information.
Miscellaneousaccessories
16,7
5,8
20
30
35,5
Ø
MechanicalkeyreleaseFor read head CET
Orderingtable
Designation Use Type Orderno/item
Mechanicalkeyrelease For read head CET Identical locking, incl 2 keys 098850Mechanical key release
Replacementkey For mechanical key release, identical locking 2 keys, identical locking 0994�4
Replacement key
Emergencyunlocking For read head CET Latching in both positions 10�714Emergency unlocking CET
Cover For read head CET and actuator CETDoor hinge right 098808
CET cover right
Door hinge left 098807CET cover left
MechanicalkeyreleaseforreadheadCETEmergencyunlockingforreadheadCETCoverforreadheadCET
MechanicalkeyreleaseThe mechanical key release is used in conjunction with the read head CET. It enables authorized per-sonnel to actuate the mechanical release using the related key. The unlocking mechanism holds the solenoid in the "unlocked" position.A screw is used to fix the lock to the cover of the read head CET (over the mechanical release).The lock is identical locking.
Order read head CET separately2 keys are supplied (for spare keys see order-ing table below)Every read head in the CET series can be upgraded with the mechanical key release
<84>
30
20
96
<65
>
6171
7,5
2
1
Ø 6,5 (2x)
CoverFor read head and actuator CET
Dimensiondrawing
Dimensiondrawing(cover for door hinge on left mirror image)
CoverWith the CET cover, tampering with the read head CET is effectively prevented. The cover prevents the use of simple tools to manually press up the actuator.
2530,4
71
EmergencyunlockingFor read head CET
EmergencyunlockingUsing the emergency unlocking the read head can be unlocked manually. In the locked position of the emergency unlocking, a ball detent mechanism prevents unintentional unlocking of the read head due to vibration or similar effects. In the unlocked position of the emergency unlock-ing, an integrated bolt engages in a bore on the flange. To reset the emergency unlocking, first the bolt must be pressed inwards, out of the detent mechanism, using a tool.
![Page 9: Non-Contact Safety System CES-AZ accessories.pdf · Non-Contact Safety System CES-AZ Subject to technical modifications; no responsibility is accepted for the accuracy of this information](https://reader036.vdocuments.us/reader036/viewer/2022071011/5fc9f1a494ed0b55166f4af1/html5/thumbnails/9.jpg)
71
Non-Contact Safety System CES-AZ
Subject to technical modifications; no responsibility is accepted for the accuracy of this information.
OrderingtableDesignation Type Use Orderno/item
Wirefrontrelease(bowden)pre-assembled incl. cover (2 LEDs)
and pull wire
Length 3 m(2 m sheathed)
automatic returnFor read head CET-AX 1066�7
BW-CET-C-3000-F
Handleforwirefrontrelease For read head CET 099795BW-Griff
Frontwirerelease(bowden),auto.returnFor read head CET-AX
Wirefrontrelease(bowden)forreadheadCET-AXHandleforwirefrontrelease(bowden)
Wirefrontrelease(bowden)Flexible routing of the cabling rope permits release of the guard locking in all installation situations.
Use as release in the case of inaccessible mounting of the read head.Use as escape release for release of the guard locking from within the danger area.Can be retrofitted on all read heads series CET-AX.
Dimensiondrawing
50
35
HandleforfrontwirereleaseFor read head CET
![Page 10: Non-Contact Safety System CES-AZ accessories.pdf · Non-Contact Safety System CES-AZ Subject to technical modifications; no responsibility is accepted for the accuracy of this information](https://reader036.vdocuments.us/reader036/viewer/2022071011/5fc9f1a494ed0b55166f4af1/html5/thumbnails/10.jpg)
72
Non-Contact Safety System CES-AZ
Subject to technical modifications; no responsibility is accepted for the accuracy of this information.
205
82
37
42
65
720
9,5
22,5
Dimensiondrawing
MountingplateforreadheadCETforhingedorslidingdoorsSuitableforaluminumprofiles40...45mmHorizontalandverticalmountingMaterialaluminum
MountingplateEMP-L-CETFor read head CET
Orderingtable
Designation Use Orderno/item
MountingplateEMP-L-CET ForreadheadCET 106695EMP-L-CET
MountingplateEMP-B-CET ForactuatorCET 106694EMP-B-CET
Miscellaneousaccessories
45
138
27
2039
58
MountingplateEMP-B-CETFor actuator CET
InstallationexamplemountingplatesEMP-.-CET
Hinged door Sliding door
2 x M6
2 x M5
2 x M6
2 x M5 Sicherheitsschrauben M5(im Lieferumfang des Betätigers)Safety screws M5(included in delivery of actuator)
Standard Alu-ProfilStandard aluminium profile(40-45 mm)
2 x M6
2 x M5
2 x M6
2 x M5Sicherheitsschrauben M5(im Lieferumfang des Betätigers)Safety screws M5(included in delivery of readhead)
Standard Alu-ProfilStandard aluminium profile(40-45 mm)
![Page 11: Non-Contact Safety System CES-AZ accessories.pdf · Non-Contact Safety System CES-AZ Subject to technical modifications; no responsibility is accepted for the accuracy of this information](https://reader036.vdocuments.us/reader036/viewer/2022071011/5fc9f1a494ed0b55166f4af1/html5/thumbnails/11.jpg)
7�
Non-Contact Safety System CES-AZ
Subject to technical modifications; no responsibility is accepted for the accuracy of this information.
18
62
64
InrushcurrentlimitingmodulePM-SCL
Orderingtable
Designation Type Orderno/item
InrushcurrentlimitingmodulePM-SCL For CES evaluation units 096945PM-SCL-096945
InrushcurrentlimitingmodulePM-SCL
Very high currents are produced on power up if capacitive loads are switched; these currents cause increased wear on electromagnetic switch-ing contacts. The PM-SCL module limits the inrush current for approx. 100 ms and protects the switching contacts.
Screen connected to
Dimensiondrawing
Blockdiagramandconnectionexample
Technicaldata
Parameter Value Unitmin. typ. max.Housing material Polyamide UL 94.V2Degree of protection acc. to EN IEC 60529 IP20Ambient temperature at UB = DC 24 V -20 - +55 °C
Atmospheric humidity 80%, not condensingStorage temperature -25 - +70 °CDegree of contamination (external, according to EN 60947) 2
Installation Mounting rail 35 mm according to DIN EN 50022Mounting rail 32 mm according to DIN EN 50035
Weight Approx. 0.04 kgConnection type Connection terminalsConductor cross-section 0.14 ... 2.5 mm²Switching voltage 15 - 40 V DCSwitching current (semiconductor output) 1 - 3000 mAInternal fuse (fine-wire fuse 20 x 5 mm) 6.3 A slow blow; breaking capacity min. 1 kAInrush current limiting 60 mADuration of limiting (at switch-on voltage 24 V) 75 - 120 msSwitching frequency - - 1 HzLoad capacitance on which interference can be suppressed (at input voltage 24 V) - - 40 µF
Voltage drop after the limiting time has elapsed - 1.16 - VModule current consumption - - 20 mA
0 V
+ DC 24 V CESread head
+ 24 V H11
13
H12 SH1
14 23 24
0 V
CES
I/O modulesupplyIn
put
Inpu
t
Inpu
t
Inpu
t SPS / PLC
L+
0 V
A
B/C
D
PM-SCLmodule
![Page 12: Non-Contact Safety System CES-AZ accessories.pdf · Non-Contact Safety System CES-AZ Subject to technical modifications; no responsibility is accepted for the accuracy of this information](https://reader036.vdocuments.us/reader036/viewer/2022071011/5fc9f1a494ed0b55166f4af1/html5/thumbnails/12.jpg)
87
Non-Contact Safety Switches CES-A-.5
Subject to technical modifications; no responsibility is accepted for the accuracy of this information.
Connectioncableswithplugconnectors
Dimensiondrawing
ForCES-A-C5.../CES-A-W5...M12 plug, 8-pin, silicone-free
Orderingtable
Use Plugconnectors Cabletype Cablelength[m] Orderno/item
ForCES-A-C5... Straight VCable PVC
5 077751C-M12F08-08X025PV05,0-ZN-077751
10 077752C-M12F08-08X025PV10,0-ZN-077752
15 07775�C-M12F08-08X025PV15,0-ZN-077753
20 077871C-M12F08-08X025PV20,0-ZN-077871
25 077872C-M12F08-08X025PV25,0-ZN-077872
50 07787�C-M12F08-08X025PV50,0-ZN-077873
∅ 6
∅ 14
"l"
8
3
5
7
4
2 1
6
1 = WH 0 V2 = BN +UB
3 = GN LA4 = YE LB5 = GY OUT6 = PK +LA7 = BU -LAB8 = RD +LB
Technicaldata
ParameterValue
Unitmin. typ. max.
Plug connectors 8-pin M12 female connector, straight
Connection type Screw terminal, knurled nut electrically connected to cable screen
Conductor cross-section 8 x 0.25 screened mm²
Material outer sheath PVC
Cable length Max. 300 (taking into account the voltage drop due to the cable resistance, see table) m
Voltagedropasafunctionofswitchingcurrentandcablelength(examples)
Switchingcurrent Cablelength"l" Voltagedrop Max.voltagedrop Max.voltagedrop
[mA] [m] Output[V] Cable[V] Total[V]
6(safety control system with
pulsed signals)
1 -100 1.4 0.1 1.5
101 - 300 1.4 0.4 1.8
50(safety relay)
1 - 15 1.5 0.2 1.7
16 - 50 1.5 0.5 2.0
51 - 100 1.5 1.0 2.5
101 - 300 1.5 3.0 3.5
400(e. g. small contactor)
1 - 15 1.7 1.2 2.9
16 - 50 1.7 4.0 5.7
51 - 100 1.7 8.0 9.7
101 - 300 1.7 - -
ConnectioncableforsafetyswitchCES-A-C5.../CES-A-W5...
View of connection side
![Page 13: Non-Contact Safety System CES-AZ accessories.pdf · Non-Contact Safety System CES-AZ Subject to technical modifications; no responsibility is accepted for the accuracy of this information](https://reader036.vdocuments.us/reader036/viewer/2022071011/5fc9f1a494ed0b55166f4af1/html5/thumbnails/13.jpg)
88
Non-Contact Safety Switches CES-A-.5
Subject to technical modifications; no responsibility is accepted for the accuracy of this information.
Orderingtable
Designation Type Orderno/item
M2�plug12-pin Mating connector for safety switch CES-A-S5... 096490
RC-12 POL CES-A-S5-H01
Plugconnectors
Ø26
51,1
SW22
1
2
34 5
6
7
89
10
11
12
Dimensiondrawing
PlugconnectorforsafetyswitchCES-A-S5...
Note:Screened connection cables must be used for the connection.
PlugconnectorM2�M23 plug, 12-pin
Technicaldata
ParameterValue
Unitmin. typ. max.
Housing material CuZn, nickel-plated
Degree of protection according to EN 60529 IP67 (inserted)
View of connection sided = 2...10.5 mm
![Page 14: Non-Contact Safety System CES-AZ accessories.pdf · Non-Contact Safety System CES-AZ Subject to technical modifications; no responsibility is accepted for the accuracy of this information](https://reader036.vdocuments.us/reader036/viewer/2022071011/5fc9f1a494ed0b55166f4af1/html5/thumbnails/14.jpg)
97
Non-Contact Safety Switches CES-AH
Subject to technical modifications; no responsibility is accepted for the accuracy of this information.
Orderingtable
Designation Version Orderno/item
M2�plug9-pin
Mating connector for safety switches CES-AH-C03-... with soldered contacts
106597P-M23F09-106597
Plugconnector
Ø26
50
8 ...
12
SW20
Dimensiondrawing
PlugconnectorforsafetyswitchesCES-AH-C0�-...
PlugconnectorM2�M23 plug, 9-pin
Technicaldata
ParameterValue
Unitmin. typ. max.
Housing material CuZn, nickel-plated
Degree of protection according to EN 60529 IP67 (inserted)
View of connection side
![Page 15: Non-Contact Safety System CES-AZ accessories.pdf · Non-Contact Safety System CES-AZ Subject to technical modifications; no responsibility is accepted for the accuracy of this information](https://reader036.vdocuments.us/reader036/viewer/2022071011/5fc9f1a494ed0b55166f4af1/html5/thumbnails/15.jpg)
118
Non-Contact Safety System CES-AP
Subject to technical modifications; no responsibility is accepted for the accuracy of this information.
Connectioncablesandsafetyscrews
Orderingtable
Series Comment Orderno./item
ConnectioncableM8snap-onPVC6-core,flyingleadfor the connection of one
CES-AP-C.2-..-SF
M8 snap-on 6-pin, length 5 m 10�556C-R08F06-06X014PV05,0-ES-103556
M8 snap-on 6-pin, length 10 m 10�557C-R08F06-06X014PV10,0-ES-103557
M8 snap-on 6-pin, length 15 m 10�558C-R08F06-06X014PV15,0-ES-103558
M8 snap-on 6-pin, length 20 m 10�559C-R08F06-06X014PV20,0-ES-103559
M8 snap-on 6-pin, length 25 m 10�560C-R08F06-06X014PV25,0-ES-103560
ConnectioncableM12PVC5-core,flyingleadfor the connection of one
CES-AP-C.1-..-SB / CES-AP-C.2-..-SB
M12-Buchsenstecker 5-polig, Länge 5 m 10018�C-M12F05-05X034PV05,0-ZN-100183
M12-Buchsenstecker 5-polig, Länge 10 m 100184C-M12F05-05X034PV10,0-ZN-100184
M12-Buchsenstecker 5-polig, Länge 20 m 100185C-M12F05-05X034PV20,0-ZN-100185
ConnectioncableM12PVC8-core,flyingleadfor the connection of one
CES-AP-C01-..-SA
M12 female plug 8-pin, length 5 m 100177C-M12F08-08X025PV05,0-ZN-100177
M12 female plug 8-pin, length 10 m 100178C-M12F08-08X025PV10,0-ZN-100178
M12 female plug 8-pin, length 20 m 100179C-M12F08-08X025PV20,0-ZN-100179
Safetyscrews (replacement) for safety switch CES-AP-C.2-...
and actuator CES-A-BLN...
M4 x 14 Packaging unit 100 pcs.
07406�Safety screws M4 x 14
1 = BN UB
2 = WH OA3 = BU 0 V4 = BK OB5 = GY OUT
View of connection side
FlyingleadM8 snap-on, 6-pin
Dimensiondrawing
FlyingleadM12 female plug 8-pin
1 = WH IB2 = BN UB3 = GN OA4 = YE OB5 = GY OUT6 = PK IA7 = BU O V8 = RD RST
123
4
8 56
7
View of connection side
12
3
4 5
6
1 = BN UB
2 = WH OA3 = BU 0 V4 = BK OB5 = GY OUT6 = PK NC
View of connection side
FlyingleadM12 female plug 5-pin
1
2
3
4
5
![Page 16: Non-Contact Safety System CES-AZ accessories.pdf · Non-Contact Safety System CES-AZ Subject to technical modifications; no responsibility is accepted for the accuracy of this information](https://reader036.vdocuments.us/reader036/viewer/2022071011/5fc9f1a494ed0b55166f4af1/html5/thumbnails/16.jpg)
144
Non-Contact Safety Switches CES-AR/CET-AR
Subject to technical modifications; no responsibility is accepted for the accuracy of this information.
Connectioncables
ConnectioncableflyingleadM12 female plug 5-pin
ConnectorsatbothendsM12 male and female plug 5-pin
Orderingtable
Series Comment Orderno.
ConnectioncableM8PUR8-pin,flyinglead
for the connection of one CES-AR-C.2
M8 female plug 8-pin, length 5 m 106671C-M08F08-08X014PU05,0-ES-106671
M8 female plug 8-pin, length 10 m 106672C-M08F08-08X014PU10,0-ES-106672
M8 female plug 8-pin, length 20 m 10667�C-M08F08-08X014PU20,0-ES-106673
ConnectioncableM12PVC8-pin,flyinglead
for the connection of one CES-AR-C01/CES-AR-C.2
M12 female plug 8-pin, length 5 m 100177C-M12F08-08X025PV05,0-ZN-100177
M12 female plug 8-pin, length 10 m 100178C-M12F08-08X025PV10,0-ZN-100178
M12 female plug 8-pin, length 20 m 100179C-M12F08-08X025PV20,0-ZN-100179
ConnectioncableM12PVC5-pin,flyinglead
for the connection of the last CES-AR-C01/CES-AR-C.2
in a switch chain
M12 female plug 5-pin, length 5 m 10018�C-M12F05-05X034PV05,0-ZN-100183
M12 female plug 5-pin, length 10 m 100184C-M12F05-05X034PV10,0-ZN-100184
M12 female plug 5-pin, length 20 m 100185C-M12F05-05X034PV20,0-ZN-100185
ConnectioncableM12PVC5-pin,connectorsatbothendsfor the connection of twoCES-AR-C01/CES-AR-C.2
in a switch chain
M12 female plug 5-pin to M12 male plug, length 5 m 100180C-M12F05-05X034PV05,0-M12M05-100180
M12 female plug 5-pin to M12 male plug, length 10 m 100181C-M12F05-05X034PV10,0-M12M05-100181
M12 female plug 5-pin to M12 male plug, length 20 m 100182C-M12F05-05X034PV20,0-M12M05-100182
ConnectioncableflyingleadM12 female plug 8-pin
1 = WH IB2 = BN UB3 = GN OA4 = YE OB5 = GY OUT6 = PK IA7 = BU O V8 = RD RST
123
4
8 56
7
View of connection side
1
2
3
4
5
1 = BN UB
2 = WH OA / IA3 = BU 0 V4 = BK OB / IB5 = GY RST
View of connection side
1
2
3
4
5
1
2
3
4
5
1 = BN UB
2 = WH OA / IA3 = BU 0 V4 = BK OB / IB5 = GY RST
Socket
Plug
View of connection side
Dimensiondrawing
ConnectioncableflyingleadM8 female plug 8-pin
1 = WH IB2 = BN UB3 = GN OA4 = YE OB5 = GY OUT6 = PK IA7 = BU O V8 = RD RST
123
4
8 56
7
View of connection side
Crim
ped
ferr
ules
![Page 17: Non-Contact Safety System CES-AZ accessories.pdf · Non-Contact Safety System CES-AZ Subject to technical modifications; no responsibility is accepted for the accuracy of this information](https://reader036.vdocuments.us/reader036/viewer/2022071011/5fc9f1a494ed0b55166f4af1/html5/thumbnails/17.jpg)
145
Non-Contact Safety Switches CES-AR/CET-AR
Subject to technical modifications; no responsibility is accepted for the accuracy of this information.
M12x1
42,5
Ø 14,5
1234
Bridgingplug/Y-distributor
BridgingplugMale plug 4-pin
12
12
097627
45°
15,1
4 85
6
3 12
7
35,1
20,5
1
24
5
3 3
4
2
1
5
M x1
Ø 14,6
M x1
()
Y-distributorM121 x 8-pin, 2 x 5-pin
Orderingtable
Series Comment Orderno.
Bridgingplug M12 plug connector 4-pin 097645Bridging plug
Y-distributorM12 M12, 1 x 8-pin, 2 x 5-pin 097627Y-distributor M12
View of connection side
Wiringbridging plug
Important: Switch chains must always be terminated with a bridging plug. Switch chains up to maximum 200 m are allowed taking into account the voltage drop due to the cable resistance (see System Manual).
Plug Socket
Pin Function
1 UB
2 OA
3 0 V
4 OB
5 RST
Pin Function
1 UB
2 IA
3 0 V
4 IB
5 RST
Note: For the connection to the Y-distributor, 5-pin standard plug connectors M12 can be used.
Dimensiondrawing
![Page 18: Non-Contact Safety System CES-AZ accessories.pdf · Non-Contact Safety System CES-AZ Subject to technical modifications; no responsibility is accepted for the accuracy of this information](https://reader036.vdocuments.us/reader036/viewer/2022071011/5fc9f1a494ed0b55166f4af1/html5/thumbnails/18.jpg)
146
Non-Contact Safety Switches CES-AR/CET-AR
Subject to technical modifications; no responsibility is accepted for the accuracy of this information.
18
19
15
1211
9
5
4
3
2
1
17
1614
13
6
10
8
7
SW20
Ø26
71
78
Ø11
,6±
0,3
ConnectioncablesRC18forCET-AR
FemaleplugRC18withcable18-pin + PE
Inserted With screen bonding clamp
View of connection side, socket
AssignmentconnectioncableRC18forCET-ARPin Corecolor Wirecross-section[mm] Pin Corecolor Wirecross-section[mm]
1 VT 0.5 11 BK 0.5
2 RD 0.5 12 GN/YE 1.0
3 GY 0.5 13 PK 0.5
4 RD/BU 0.5 14 BN/GY 0.5
5 GN 0.5 15 BN/YE 0.5
6 BU 1.0 16 BN/GN 0.5
7 GY/PK 0.5 17 WH 0.5
8 GN/WH 0.5 18 YE 0.5
9 YE/WH 0.5 19 BN 1.0
10 GY/WH 0.5
18
19
15
1211
9
5
4
3
2
1
17
1614
13
6
10
8
7
92
85
11,4
±0,
3
26
FemaleplugRC18withcablehalogen-free18-pin + PE
OrderingtableDesignation Cablelength[m] Orderno./item
FemaleplugRC18withcablePUR
forCET-AR18-pin + PE
1.5 092761RC18EF1,5M-C1825
3 092816RC18EF3M-C1825
6 077014RC18EF6M-C1825
8 077015RC18EF8M-C1825
10 092898RC18EF10M-C1825
15 077016RC18EF15M-C1825
20 092726RC18EF20M-C1825
25 092727RC18EF25M-C1825
30 09599�RC18EF30M-C1825
PlugconnectorRC18withcablehalogen-free
forCET-AR18-pin + PE
1.5 09288�RC18EF1,5MF-C1825
3 092884RC18EF3MF-C1825
6 092885RC18EF6MF-C1825
8 092886RC18EF8MF-C1825
10 092887RC18EF10MF-C1825
15 092888RC18EF15MF-C1825
20 092889RC18EF20MF-C1825
25 092890RC18EF25MF-C1825
Inserted With screen bonding clamp
View of connection side, socket
Dimensiondrawing
![Page 19: Non-Contact Safety System CES-AZ accessories.pdf · Non-Contact Safety System CES-AZ Subject to technical modifications; no responsibility is accepted for the accuracy of this information](https://reader036.vdocuments.us/reader036/viewer/2022071011/5fc9f1a494ed0b55166f4af1/html5/thumbnails/19.jpg)
148
Non-Contact Safety Switches CES-AR/CET-AR
Subject to technical modifications; no responsibility is accepted for the accuracy of this information.
OrderingtableDesignation Type Use Orderno/item
Wirefrontrelease(bowden)pre-assembled incl. cover (4 LEDs)
and pull wire
Length 3 m(2 m sheathed)
automatic returnFor read head CET-AR 109�52
BW-CET-C-3000-F-109352
Handleforwirefrontrelease For read head CET 099795BW-Griff
Safetyscrews for safety switches CES-AR-C.2-...
and actuators CES-A-BLN...
M4 x 14 packaging uni 100 pcs.
For safety switches CES-AR-C.2-... and actuators CES-A-BLN...
07406�Safety screws M4 x 14
Frontwirerelease(bowden),auto.returnFor read head CET-AR
Wirefrontrelease(bowden)forreadheadCET-ARHandleforwirefrontrelease(bowden)Safetyscrews
Wirefrontrelease(bowden)Flexible routing of the cabling rope permits release of the guard locking in all installation situations.
Use as release in the case of inaccessible mounting of the read head.Use as escape release for release of the guard locking from within the danger area.Can be retrofitted on all read heads series CET-AR.
Dimensiondrawing
50
35
HandleforfrontwirereleaseFor read head CET