no minimums - no reserves public...

PUBLIC AUCTIONNO MINIMUMS - NO RESERVES

1.800.426.3008 - 425.486.1246murphyauction.com

James G. Murphy Co.Commercial & Industrial Auctioneers

BID LIVE OR BID ONLINE WITH MURPHYLIVE!

UPPER COLUMBIA MILLDAY 2

ABRASIVE SANDER MILL9AM - THURSDAY - APRIL 13PREVIEW 8-4PM, APRIL 1171410 E COLUMBIA AVE, BOARDMAN, OR 97818

DAY 1SAWMILL

9AM - WEDNESDAY - APRIL 12PREVIEW 8-4PM, APRIL 11

77200 POLELINE ROAD, BOARDMAN, OR 97818

1.800.426.3008 • 503.463.4444 • 425.486.1246 - murphyauction.com 1.800.426.3008 • 503.463.4444 • 425.486.1246 - murphyauction.com

SAWMILL: DAY 1 MERCHANDISER W/LOG SCANNING 2012 WEST COAST INDUSTRIAL SYSTEM WHOLE LOG MERCHANDISER

W/(6) 72” INSERT TOOTH INDIVIDUALLY POSITIONED CHOP SAWS W/75 HP MOTORS, HOLD DOWN & CLAMP ARMS, 30 HP SAW POSITIONING DRIVES, 7-1/2 HP SAW CYCLE DRIVES, APPROX. 70’X30” BLOCK RECEIVING BELT W/TOSHIBA 40 HP MOTOR TO SM CYCLO 17:1 REDUCER, LINEAL POSITIONED LOG PUSHING END FENCE, 12’ 8-STRAND JACK LADDER INFEED, (2) 22’ 4-ARM ROTARY KICKERS, APPROX. 150’X30” INFEED LOG BELT W/BELT TAKE UP & GEARHEAD DRIVE, MERCHANDISER LOG SCANNER W/(2) JOE SCAN JS-20 SCAN HEADS, S/N: 436, APPROX. 76’ OUTFEED LOG BELT W/(3) MOTOR DRIVEN VENEER BLOCK KICKERS & (2) LOG DECK KICKERS W/TOSHIBA 5 HP MOTOR TO SUMITOMO 28 RPM REDUCERS, NICHOLSON 600 GALLON HYDRAULIC UNIT W/(2) KAWASAKI 50 HP/50 GPM PUMPS & (1) DENNISON 60 GPM RECIRCULATING PUMP, AIR COOLED, ALLEN BRADLEY BULLETIN 2100 MCC W/10-SECTIONS, (21) SWITCHES & (18) ALLEN BRADLEY SMC FLEX 150-F135NBD VFD’S W/TOUCH PAD CONTROLS, ALLEN BRADLEY INTELLICENTER 8-SECTION MCC W/(21) SWITCHES & ALLEN BRADLEY POWER FLEX 700 25 HP AC DRIVE W/TOUCH PAD CONTROLS

LOG LOADER SERCO 200-F HYDRAULIC OPERATED PEDESTAL MOUNT HEEL BOOM LOG

LOADER, 26’ BOOM, APPROX. 75’ ELECTRIC MOTOR, S/N: L7087 (NOT INSTALLED)

STEP FEEDERS 2008 COMACT 15’ 6-STEP MECHANICAL LOG STEP FEEDER W/MOTOR TO

SM CYCLO DRIVE (INFEED TO OPTIMIZED TWIN BAND LINE)LINDEN 15’ 7-STEP MECHANICAL LOG STEP FEEDER W/MOTOR TO

SM CYCLO DRIVE (LOG DECKS)LINDEN 15’ 3-STEP MECHANICAL LOG STEP FEEDER W/MOTOR TO

SM CYCLO DRIVE (VENEER BLOCK FEEDER FROM MERCHANDISER) LOG DECKS - LACK LADDER APPROX. 80’X15’ 5-STRAND INFEED LOG TRANSFER DECK, S-DRIVE, 15 HP

MOTOR TO SM CYCLO 79:1 REDUCERAPPROX. 40’X15’ 4-STRAND INFEED LOG TRANSFER DECK, S-DRIVE, 15 HP

MOTOR TO SM CYCLO 79:1 REDUCERAPPROX. 60’X15’ 4-STRAND INFEED LOG TRANSFER DECK, S-DRIVE, 15 HP

MOTOR TO SM CYCLO 79:1 REDUCER14’X15’ 4-STRAND JACK LADDER TRANSFER W/25 HP MOTOR TO SM CYCLO

22.4 RPM REDUCER TWIN BAND HEADRIG W/SCANNING 2007 COMACT 972 CETEC 6’ TEMPOSONIC POSITIONED OPTIMIZED TWIN

VERTICAL BAND HEADRIG W/TOSHIBA 200 HP/1780 RPM DRIVE MOTORS, (2) ALLEN BRADLEY SMC PLUS FLEX 150-F317NBD AC DRIVES, HYDRAULIC STRAIN, VULCAN INTERMEC LUBE SYSTEM, S/N: 972CE3160080102338, COMACT 975 TEMPOSONIC POSITIONED 8-KNIFE CANTERS W/LINDEX KNIVES & TOSHIBA 250 HP/1785 RPM MOTORS, (2) ALLEN BRADLEY SMC PLUS FLEX 150-F251NBD AC DRIVES, COMACT 961 OLI-CS3 OPTIMIZED INFEED MODULE W/MULTI-AXIAL SHIFTS & SKEWS W/TOSHIBA 40 HP MOTOR TO REX EARTH 23.61 RPM REDUCER, (2) COMACT VERIFYING ROTATION CAMERAS, (6) FINAL CAMERAS, (6) SCAN MEG SCANNERS, FEED & HOLD DOWN ROLLS, COMACT 964 FLYING LOG TURNER, COMACT 861 50’ V-FLIGHT MEASURING CONVEYOR W/TOSHIBA 25 HP MOTOR TO REX REDUCER, COMACT C1 SCANNING STATION W/(8) CAMERAS, (2) LASERS & (2) SCAN MEG SCANNERS, TWIN APPROX. 12”X20’ CANTED FEED BELTS W/MOTOR TO SM CYCLO REDUCERS, COMACT 966 OUTFEED MODULE W/SHARP CHAIN, TOSHIBA 25 HP MOTOR TO SM CYCLO DRIVE, TWIN 20”X30’ SIDE BOARD BELTS W/7-1/2 HP MOTORS TO SM CYCLO

REDUCERS, ALLEN BRADLEY INTELLICENTER 5-SECTION MCC W/(1) 15 HP & (1) 5 HP ALLEN BRADLEY POWERFLEX 700 VFD’S, ALLEN BRADLEY CENTERLINE 2100 3-SECTION MCC W/(3) SWITCHES, COMACT 5-SECTION MCC W/(9) ALLEN BRADLEY POWERFLEX 700 DRIVES, (2) 40 HP, (6) 30 HP & (1) 20 HP DRIVES, COMACT CONTROL ROOM W/SCANNING COMPUTERS, PLC & MOTION CONTROLLERS, PFS 600 GALLON HYDRAULIC UNIT W/(2) 50 HP, (1) 25 HP, (1) 15 HP & (1) 7-1/2 HP RECIRCULATING PUMPS, 10’X15’ AIR CONDITIONED CONTROL CAB W/COMACT VIEWING SCREEN & CONTROLS, LASER ALIGNMENT TOOLS, SPARE SAWS & PARTS, V-FLIGHT & SHARP CHAIN

RESAW CAE 6’ LH HORIZONTAL BAND RESAW, S/N: 71-87, APPROX. 200 HP MOTOR,

HYDRAULIC STRAIN, PURE LUBE SYSTEM, 10’ SMOOTH FEED THRU ROLLS W/HOLD DOWNS, FIXED GUIDES, 10’ POWERED INFEED ROLLCASE W/(6) 12”X36” ROLLS, 24’ POWERED OUTFEED ROLLCASE W/(11) 8-1/2”X30” ROLLS, 5’ 6-STRAND 81X JUMP TRANSFER, 6-ARM TIPPLE, ALLEN BRADLEY INTELLICENTER 8-SECTION MCC W/(27) SWITCHES, ALLEN BRADLEY SMC FLEX PLUS 150-F251-NBD AC DRIVE, (5) ALLEN BRADLEY POWERFLEX VFD’S, (2) 15, (1) 10 HP, (1) 7-1/2 HP & (1) 5 HP, ALLEN BRADLEY LOGIX 5561 PLC W/(2) ETHERNET, (1) ANALOG, (2) 2-AXIS SERVO, (1) DC INPUT, (3) AC OUTPUT MODULES, SPARE SAWS PARTS

EDGERS W/SCANNING 2008 TMT 8” BOTTOM ARBOR CURVE SAWING RH GANG EDGER, S/N: 5257,

8”X30” CAPACITY, 200-600 FPM, TOSHIBA 600 HP/1800 RPM MOTOR, GANG CLUSTER, #3 SPLINED 23” SAWS, CHROMED KNURLED FEED THRU ROLLS, 20 HP INVERTER DUTY MOTOR, INFEED & OUTFEED FEED & PRESS ROLL MODULES W/SKK 20 HP/190 RPM DRIVES, SAW LUBE SYSTEM, 30”X40’ SCAN BELT W/ENDLESS BELT W/TAKE UP ASSEMBLY & SKK 30 HP/190 RPM DRIVE, (2) JOE SCAN JS20-01 SCANNER HEADS, S/N’S: 1045 & 1046, 36”X22’ OUTFEED BELT W/LINEAR POSITIONED EDGE PICKER, CLEARING & PRESS ROLLS, SKK 5 HP/125 RPM DRIVE, 13’ CANT FEEDER TABLE W/ADJUSTABLE LINE BAR, (6) 8-1/2”X22” CANTED ROLLS, POP UP CANT TURNER, PINS & PIN STOPS, 4’ 3-STRAND JUMP TRANSFER W/SKK 7-1/2 HP/190 RPM & SKK 3 HP/37 RPM DRIVES, 13’ 5-STRAND 81X CANT QUEUING DECK, (5) BOARD HOOK S-STOPS, SKK 5 HP/37 RPM DRIVE, ALLEN BRADLEY SMC FLEX 150-F970NBE 1000 HP AC DRIVE W/AC & CHILLER, ALLEN BRADLEY INTELLICENTER 7-SECTION MCC W/(22) SWITCHES W/(1) 40 HP, (2) 25 HP, (3) 15 HP, (2) 10 HP, (2) 7-1/2 HP & (1) 5 HP ALLEN BRADLEY POWERFLEX DRIVES, ALLEN BRADLEY LOGIX 5561 PLC W/(3) ETHERNET, (1) COUNTER, (3) AXIS SERVO’S, (1) DC INPUT, (2) AC INPUT & (3) AC OUTPUT MODULES, (4) ALLEN BRADLEY ULTRA 3000 SERVO CONTROLLERS, SPARE SAWS & PARTS

2009 OPTIMIL 2RS APPROX. 2”X30” 3-SAW SHIFTING SAW RH BOARD EDGER W/(3) TOSHIBA 75 HP/3545 RPM MOTORS, 20” SAWS, CHROMED FEED THRU ROLLS, INFEED & OUTFEED FEED & PRESS MODULES W/DRIVES, 29”X72’ SCAN BELT W/(2) JOE SCAN JS-20SR SCANNER HEADS, S/N’S: 1047 & 1048, 34”X24’ OUTFEED BELT W/WANESHEAR TEMPOSONIC EDGE PICKER, CLEARING ROLLS W/MOTOR TO MARS REDUCER, 34”X26’ OUTFEED BELT W/SKK DRIVE TO 4’X11’ SLOW DOWN BELT W/SKK DRIVE, 19’ 6-STRAND 81X INFEED TRANSFER W/BOARD TURNERS, REJECT ROLLS, SCAN MEG SCANNER, (2) DRIVES, 19’ 2-SECTION INFEED TRANSFERS W/EVEN END ROLLS, LIVE EVEN END CHAIN, SEQUENCING ROLLS, (3) TOSHIBA 5 HP/REX MERCURY 73 RPM DRIVES, 8’ 6-STRAND RADIUS BACK UNSCRAMBLER W/TOSHIBA 15 HP MOTOR TO REX VENUS 73 RPM REDUCER, ALLEN BRADLEY INTELLICENTER 10-SECTION MCC W/(34) SWITCHES W/(2) 20 HP, (1) 15 HP, (12) 7-1/2 HP & (1) 5 HP ALLEN BRADLEY POWERFLEX DRIVES, ALLEN BRADLEY LOGIX 5561 PLC W/(3) ETHERNET, (5) 2-AXIS, (1) DC INPUT, 2ND RACK W/(1) ETHERNET, (2) AC INPUT & (3) AC OUTPUT MODULES, ALLEN BRADLEY SERVO CABINET W/(6) ULTRA 3000 SERVO DRIVES, SPARE SAWS & PARTS

TRIMMERS - SCANNING - LUG LOADER 2007 TECO/TURNER 13’ INDIVIDUALLY MOTORIZED BOARD TRIMMER, 6” CUT,

ZERO, 2’, 4’, 6’, 8’, 10’, 3M, 12’ & 4M SAWS W/7-1/2 HP MOTORS, 3-STAGE SWING GATE STYLE FENCE W/(3) ALLEN BRADLEY ULTRA 3000 SERVO CONTROLLERS, 18’ 7-STRAND 81X LUGGED FEED THRU TRANSFER W/(5) 7’ EVEN END ROLLS, CLEANOUT CONVEYOR, (18) JOE SCAN 20WX SCAN HEADS W/12’ 7-STRAND 81X LUGGED SCANNER TRANSFER, 5’ 6-STRAND 81X INFEED INFEED TO LUG LOADER W/EURODRIVE, 10’ 6-STRAND 81X TRANSFER W/SKK 3 HP/68 RPM DRIVE, (6) 8-1/2”X36” CANTED EVEN END ROLLS W/SKK DRIVE, 12’ 6-STRAND RADIUS BACK UNSCRAMBLER W/SKK DRIVE, ALLEN BRADLEY INTELLICENTER 9-SECTION MCC W/(40) SWITCHES W/(1) 7-1/2 HP & (3) 5 HP ALLEN BRADLEY POWERFLEX DRIVES, ALLEN BRADLEY LOGIX 5561 PLC W/(3) ETHERNET, (1) ANALOG INPUT, (2) 2-AXIS SERVO, (1) DC INPUT, (3) AC INPUTS, (3) AC OUTPUT MODULES, SPARE SAWS & PARTS

2007 TECO/TURNER 13’ INDIVIDUALLY MOTORIZED TIMBER TRIMMER, 10” CUT, ZERO, 8’, 10’ & 12’ SAWS W/10 HP MOTORS, 24” SAWS, 22’ 6-STRAND 81X LUGGED FEED THRU TRANSFER W/(4) 4’ EVEN END ROLLS, DROP OUT BELT, 10’ 6-STRAND RADIUS BACK UNSCRAMBLER

2007 PLC 200 NC-12 TONG LOADER, S/N: NC603-12M, (2) ALLEN BRADLEY POWERFLEX 700 7-1/2 HP AC DRIVES, MICROLOGIX 1100 MINI PLC (BOARD TRIMMER LINE)

SORTERS/STACKERS 2007 TECO/TURNER 13’ 15-BIN SORT PUSH BIN SLANT BIN BOARD SORTER,

PROJECT #2027G, 8’-13’ CAPACITY, 4’ BIN CENTERS, WESTINGHOUSE 60 HP MOTOR TO SKK 84 RPM REDUCER SORTER DRIVE, 12’ 6-STRAND 81X INFEED TRANSFER (FROM TRIMMER) W/(7) 7’ EVEN END ROLLS, 15’ 5-STRAND 81X INCLINE TRANSFER, (3) 38’ 5-STRAND TAKE AWAY CHAINS W/(2) SKK 7-1/2 HP/56 RPM DRIVES, 24’ 5-STRAND 81X LUGGED DECLINE TRANSFER TO APPROX. 50’ 4-STRAND 81X PULL CHAIN W/EU-RODRIVE GEARHEAD, 30’ POWERED RE-ENTRY ROLLCASE W/(13) 9”X54” JUMP ROLLS, 5 HP MOTOR TO SKK 84 RPM REDUCER, WCS 40 HP HYDRAULIC UNIT

2007 TECO/TURNER 13’ 28-BIN PUSH LUG SORTER, APPROX. 50 HP WEG MOTOR TO SM CYCLO SORTER DRIVE, 110’ 4-STRAND PUSH LUG TRANSFER, 24’ 4-STRAND 81X TAKE AWAY TRANSFER W/LEESON 3 HP MOTOR TO REX MARS 32 RPM REDUCER, 90’ 4-STRAND 81X TAKE AWAY TRANSFER W/SKK 7-1/2 HP/25 RPM DRIVE, ALLEN BRADLEY INTELLICENTER 16-SECTION MCC W/(56) SWITCHES W/(1) 50 HP, (1) 20 HP, (2) 15 HP, (1) 7-1/2 HP, (9) 5 HP POWERFLEX DRIVES, ALLEN BRADLEY LOGIX 5561 PLC W/(2) ETHERNET, (1) ANALOG, (1) COUNTER & (1) DC OUTPUT MODULES, HPS 40 HP HYDRAULIC UNIT, ACCUMULATOR, AIR COOLED

2007 MOCO 14’ LH 1/3 CRIB STYLE BOARD STACKER W/AUTO STICK PLACER, 1”-4” THICKNESS, 3-1/2”-12” WIDTH, 6’-13’ 4” LENGTH CAPACITIES, 72”X96-1/2” PACKAGE, 7/8”X1-1/2”X96” STICKERS, 9-CYCLES PER MIN., 96” LOWERING ROLLCASE W/(5) ROLLS, SECONDARY LIFT ARMS W/PULL BACK, (8) STICKER PLACING ARMS, (2) APPROX. 20’ 6-STRAND 81X INFEED TRANSFERS W/(2) EVEN END CHAINS, 60” EVEN END ROLLS, (2) 18’ POWERED OUTFEED ROLLCASES W/(7) 8”X101” ROLLS, TECO GEARHEAD DRIVES, 18’ 6-STRAND RADIUS BACK UNSCRAMBLER W/7-1/2 HP DRIVE, 24’ 5-STRAND 81X INCLINE W/SKK 5 HP/30 RPM DRIVE, ALLEN BRADLEY CENTERLINE 5-SECTION MCC W/(18) SWITCHES W/(2) 15 HP, (1) 10 HP, (2) 5 HP & (3) 2 HP POWERFLEX DRIVES, ALLEN BRADLEY LOGIX 5561 PLC W/(3) ETHERNET, (1) AC INPUT, (3) AC OUTPUTS, (2) DC INPUT MODULES, SERVO CABINET W/(12) REX ROTH INDRA DRIVE SERVO CONTROLLERS

TIMBER SORTER 14’ OVER END STACKER W/(4) 54” LOWERING FORKS W/(2) MOTOR TO REDUCER DRIVES, 12’ & 9’ 4-STRAND 81X INFEED TRANSFERS, 16’ 4-STRAND 81X OUTFEED W/3-SECTION SCISSOR LIFT, SKK DRIVE, 9’ 4-STRAND 81X LUGGED UNSCRAMBLER W/MOTOR TO REX DRIVE

CHIPPER WEST SALEM MACHINERY 66-8HB 66” 8-KNIFE CHIPPER, S/N: 101589

W/TECO 300 HP/1180 RPM MOTOR, HORIZONTAL INFEED, BOTTOM DISCHARGE, LINDEX CONVERSION, ALLEN BRADLEY SMC FLEX 150-F361NBDB DRIVE, SPARE KNIVES & PARTS

NICHOLSON 55” LILY PAD CHIPPER W/APPROX. 150 HP MOTOR, DROP FEED, BOTTOM DISCHARGE, S/N: 1673, APPROX. 36”X42’ INFEED CHEVRON BELT W/5’ FIBERGLASS TUB, MDI CR85 METAL DETECTOR W/XR 365 SEARCH COIL, S/N: XRS11009, SKK DRIVE, APPROX. 20”X28’ OUTFEED CHEVRON BELT W/SKK DRIVE

VIBRATORY CONVEYORS WEST SALEM MACHINERY CSCB46 24”X46’ VIBRATORY CONVEYOR,

S/N: 329589 W/5’ FIBERGLASS TUB, MDI CR85 METAL DETECTOR, S/N: 71689

MILL POWER 16”X96’ VIBRATORY CONVEYOR, S/N: 87184

WASTE CONVEYORS - TRANSFERS - CONVEYORS - ROLLCASES APPROX. 110’ 8”X14” BOX CHAIN W/FLITES CONVEYOR

(FROM BOARD TRIMMER), S-DRIVE, SKK DRIVEAPPROX. 90’ 8”X14” BOX CHAIN W/FLITES CONVEYOR (FROM TWIN),

S-DRIVE, SKK DRIVEAPPROX. 75’ 6”X11-1/2” BOX CHAIN W/FLITES CONVEYOR

(FROM BOARD EDGER), S-DRIVE, SKK DRIVEAPPROX. 70’ 6”X11-1/2” BOX CHAIN W/FLITES CONVEYOR

(FROM BOARD EDGER), S-DRIVE, SKK DRIVEAPPROX. 40’ 6”X11-1/2” BOX CHAIN W/FLITES CONVEYOR (FROM RESAW),

S-DRIVE, SKK DRIVESAPPROX. 36’ 8”X14” BOX CHAIN W/FLITES CONVEYOR (FROM TWIN),

S-DRIVE, SKK DRIVEAPPROX. 20’ 6”X11-1/2” BOX CHAIN W/FLITES CONVEYOR

(CHIPPER BYPASS), SKK DRIVEAPPROX. 18”X65” CLEAN OUT BELT CONVEYOR

(FROM BOARD TRIMMER), MOTOR TO REX DRIVEAPPROX. 16”X40’ CLEAN OUT BELT CONVEYOR (FROM TWIN), MOTOR TO

REX DRIVEPARTIAL APPROX. 100’ 8”X14” BOX CHAIN W/FLITES CONVEYOR

(FROM CHIPPER), NO DRIVENUMEROUS LUMBER TRANSFERS, CONVEYORS & ROLLCASES

FILING & GRINDING EQUIPMENT SIMONDS RMO BANDSAW LEVELER, S/N: 06942-412WRIGHT TALON TW-2 BANDSAW AUTO TIPPER, STANDS, S/N: L0705WRIGHT W1902-P BANDSAW DUAL SIDE GRINDER, STANDS, S/N: G0801ARMSTRONG #4RH BANDSAW SHARPENER W/LINEAL SLIDE, STANDS,

S/N: 39148ARMSTRONG #4LH BANDSAW SHARPENER W/LINEAL SLIDE, STANDS,

S/N: 39140ARMSTRONG #2RH BANDSAW SHARPENER W/(2) VFD’S, STANDS, S/N: 7442ARMSTRONG BANDSAW STRETCHER ROLL W/ANVILS & STANDWRIGHT TALON P-1 CNC ROUND SAW GRINDER, S/N: D0801WRIGHT TALON DS-3 DUAL SIDE GRINDER, S/N: J0705WRIGHT W150 TOP & FACE GRINDERARMSTRONG 3-10 CIRCLE SAW STRETCHER ROLL W/GB310C SLIDE SAW

CARRIAGE UPGRADE2007 ACME BSA1000 CIRCLE SAW SHARPENER, S/N: J2024IMW 240SS DUAL HEAD GUIDE RESURFACERLINDEX ILMTECH AUTO KNIFE GRINDERBARNHARDT NO. 51 WHEEL GRINDER W/POWER HEADS, BARREL,

FLEX CABLEBANDSAW GUIDE GRINDER, GUIDE MATERIAL, ANVILS, CIRCLE SAW SET

UP STAND, SYSTIMATIC GRANITE PLATE, SPARE BAND & ROUND SAWS


SAWMILL ELECTRICAL 2006 GE SPECTRA SERIES 4000 AMP 3-SECTION MAIN W/GE POWER BREAK II

4000 AMP BREAKER, (1) 1200 AMP, (3) 800 AMP & (2) 600 AMP BREAKERSALLEN BRADLEY INTELLICENTER 16-SECTION MCC W/(56) SWITCHES,

(14) ALLEN BRADLEY POWERFLEX 700 DRIVESALLEN BRADLEY INTELLICENTER 10-SECTION MCC W/(34) SWITCHES,







(2) ALLEN BRADLEY POWERFLEX 700 DRIVESALLEN BRADLEY BULLETIN 2100 10-SECTION MCC W/(21) SWITCHES,



ALLEN BRADLEY POWERFLEX 700 DRIVESCOMACT 5-SECTION STARTER CABINET W/(9) ALLEN BRADLEY POWERFLEX

700 DRIVES(5) ALLEN BRADLEY SMC PLUS FLEX DRIVES TO 1000 HP(6) ALLEN BRADLEY LOGIX 5571 & 5561 PLC’SALL MCC’S & PLC’S ARE DEVICENET NETWORK ENABLED(40±) NEW & REBUILT SPARE MOTORS TO 600 HP/775 RPM, (15±) NEW &

REBUILT SPARE SKK GEARHEAD MOTORS & REDUCERS TO 20 HP/45 RPM, (15±) SPARE SM CYCLO REDUCERS, SPARE REX REDUCERS

CRANE & JIB ARMS HARRINGTON 5-TON UNDERSLUNG BRIDGE CRANE W/POWER TRAVEL,

APPROX. 50’ SPAN, 70’ TRAVEL(2) SPANCO 2-TON JIB ARMS W/CM LODESTAR 2-TON ELECTRIC CHAIN

HOISTS1-TON JIB ARM W/CM VALUSTAR 1-TON ELECTRIC CHAIN HOIST MISCELLANEOUS MILL EQUIPMENT & SUPPLIES MILLER BLUE STAR 185 GAS WELDER/GENERATOR, (2) WAGNER L722 STACK

PROBES, ENGINE STAND, (2) CHERRY PICKERS, SHARK PRESSURE WASHER, CHAIN HOISTS, FALL PROTECTION, FLOOR FANS, PORTABLE HEATERS, 5500 LB PALLET JACK, PORTABLE COOLER, FLAMMABLES CAB-INETS, GANG BORES, AIR & ELECTRIC REELS, SHOP VAC’S, RUBBER MATS, INTERCOMS, CAMERAS, DUMPSTERS, BLUEPRINT CABINETS, COPIERS, PRINTERS, COMPUTERS & OFFICE FURNITURE

SAWMILL ROLLING STOCK 1984 CAT 992C RUBBER TIRE WHEEL LOADER W/CAT 3412 700 HP DIESEL

ENGINE, 13 CU. YD. BUCKET, 45.65-45 TIES, HOUR METER READS: 445.5, S/N: 49Z00431

1996 CAT 950F RUBBER TIRE LOG LOADER W/CAT BUCKET, CAT 3116 DIESEL ENGINE, 23.5-25 TIRES, HOUR METER READS: 16,544, S/N: 5SK02038

1989 LINKBELT LS4300C SERIES II TRACK MOUNTED HEEL BOOM LOG LOADER, PIERCE HLB2540 HEEL BOOM W/SWIVEL GRAPPLE, S/N: PHLB8684, HOUR METER READS: N/A, S/N: C8130640

1989 LINKBELT LS4300C SERIES II TRACK MOUNTED HEEL BOOM LOG LOADER, PIERCE HLB2340 HEEL BOOM W/SWIVEL GRAPPLE, S/N: PHLB8684, HOUR METER READS: N/A, S/N: 430425473

1975 BARKO 275A SELF-PROPELLED TANDEM AXLE HEEL BOOM LOG LOADER, 6-CYLINDER TURBO DIESEL ENGINE, OUTRIGGERS, 315/80R-22.5 TIRES, S/N: 17510

DOOSAN D160S-5 FORKLIFT, 22,500 LB CAPACITY, DIESEL, 177” 2-STAGE MAST W/FORK POSITIONERS, FINGERTIP CONTROLS, SIDE SHIFT, 8’ FORKS, DUAL PNEUMATIC TIRES, ENCLOSED CAB, HOUR METER READS: N/A, S/N: D-00260

DOOSAN G70S-5 FORKLIFT, 12,600 LB CAPACITY, PROPANE, 217” 2-STAGE MAST W/FORK POSITIONERS, FINGERTIP CONTROLS, SIDE SHIFT, 46” FORKS, DUAL PNEUMATIC TIRES, ENCLOSED CAB, HOUR METER READS: 9,571, S/N: PG0014 (EQUIP. #99.013)

2002 SKYTRACK 6036 TELESCOPIC FORKLIFT, 6,000 LB CAPACITY, 36” REACH, CUMMINS 4BT3.9 TURBO DIESEL, HOUR METER READS: 4,196, S/N: T469R-1627

2000 INTERNATIONAL 9100I 6X4 TANDEM AXLE TRACTOR, ISM TURBO DIESEL ENGINE, EATON FULLER 10-SPEED TRANSMISSION, PROTECH ALUMINUM HEADACHE RACK, ALUMINUM FUEL TANKS, 235-75R22.5 TIRES, ODOMETER READS: 427,100 MILES, VIN: 1HSCBAHR7YJ063233

2000 INTERNATIONAL 9100I 6X4 TANDEM AXLE TRACTOR, ISM TURBO DIESEL ENGINE, EATON FULLER 10-SPEED TRANSMISSION, PROTECH ALUMINUM HEADACHE RACK, ALUMINUM FUEL TANKS, 235-75R22.5 TIRES, ODOMETER READS: 469,930 MILES, VIN: 1HSCBAHR2YJ063209

1998 ALLOY A1CFT48, 48’ TANDEM AXLE FLATBED TRAILER, 295/75R22.5 TIRES, VIN: 1ALSF0286WS981330, LVS #17


1998 ALLOY A1CFT48, 48’ TANDEM AXLE FLATBED TRAILER, 295/75R22.5 TIRES, VIN: 1ALSF028XWS981072, LVS #16


1993 UTILITY ATCO 78 24’ TANDEM AXLE FLATBED TRAILER, 295/75R22.5 TIRES, VIN: 1ALCA2162PS931220

1979 UTILITY 40’ TANDEM AXLE FLATBED TRAILER, 295/75R22.5 TIRES, VIN: 7L91961002, LVS #24

1968 BROWN 32’ TANDEM AXLE FLATBED TRAILER, 295/75R16 TIRES, VIN: S684611C, LVS #27

1968 BROWN 32’ TANDEM AXLE FLATBED TRAILER, 295/75R16 TIRES, VIN: S684512C, LVS #28

2008 PREMIER NORTHWEST 8’X16’ TANDEM AXLE GOOSENECK TRAILER W/FOLD DOWN RAMPS, 20,000 GVWR, 235/80R16 TIRES, VIN: 1P9GF25278H539795

2008 TOYOTA TACOMA XTRA CAB 4X4 PICKUP, GAS ENGINE, MANUAL TRANSMISSION, TRUCK BOX , SILVER, ODOMETER READS: 67,783 MILES, VIN: 5TEUX42N18Z535038

2008 TOYOTA TACOMA XTRA CAB 4X4 PICKUP, GAS ENGINE, MANUAL TRANSMISSION, TRUCK BOX , WHITE, ODOMETER READS: 98,761 MILES, VIN: 15TEUX42N78Z539384

2006 CHEV SILVERADO PICKUP2001 DODGE RAM 3500 4X4 PICKUP, MAGNUM V8 GAS ENGINE, AUTO

TRANSMISSION, GREEN, ODOMETER READS: 146,372 MILES, VIN: 3B7KF26Z91M254961

2001 CHEV 3500 4-SEAT PASSENGER VAN, GAS ENGINE, AUTO TRANSMISSION, WHITE, ODOMETER READS: 72,180 MILES, VIN: 1GAHG39R411224099

1992 FORD F350 4X4 SERVICE TRUCK, GAS ENGINE, AUTO TRANSMISSION, SERVICE BODY, MILLER BOBCAT 225 WELDER, HOSE REELS, ODOMETER READS: 133,725 MILES, VIN: 2FTHF36H7NCA60227

1998 GENIE 40, 4WD MANLIFT, 40’ REACH, 500 LB CAPACITY, HOUR METER READS: 6,085

PLANER MILL: DAY 2

KILNS (3) 2012 SII SIDE LOAD STEAM FIRED PACKAGE KILNS, APPROX. 24’H X

50’W X 60’L ALL ALUMINUM & STAINLESS STEEL CONSTRUCTION, (12) SMITHCO 72” REVERSING FANS W/20 HP MOTORS, (6) EXHAUST FANS, 6’X6’ KILN COILS, POWER ASSIST CARRIER CLAMPS, CS21 VENT-X-CHANGER AIR HANDLER/HEAT EXCHANGER W/150 HP MOTOR, 60” & 50” MANIFOLDS, 2013 SIEMENS 3000 AMP 3-SECTION MAIN, (13) ALLEN BRADLEY POWERFLEX 700 200 HP DRIVES W/VK LINE PROTECTORS, ALLEN BRADLEY LOGIX 5571 PLC, SPIRAX SARCO BFT .40-15, 500 GALLON CONDENSATE TANK W/PUMPS, EMC MISTIFYING SYSTEM, CARRIER 174,000 BTU COOLING UNIT, ON-LINE TOC-VCSH TOTAL ORGANIC CARBON ANALYZER

(6) 2008 SII SIDE LOAD STEAM FIRED PACKAGE KILNS, APPROX. 24’H X 50’W X 60’L ALL ALUMINUM & STAINLESS STEEL CONSTRUCTION, (12) SMITHCO 72” REVERSING FANS W/20 HP MOTORS & (6) EXHAUST FANS, 6’X6’ KILN COILS, POWER ASSIST CARRIER CLAMPS, CS21 VENT-X-CHANGER AIR HANDLER/HEAT EXCHANGER W/TOSHIBA 200 HP MOTOR, 60” & 50” MANIFOLDS, 2008 GE SPECTRA SERIES 3000 AMP 3-SECTION MAIN, (25) ALLEN BRADLEY POWERFLEX 700 200 HP DRIVES, ALLEN BRADLEY SLC 5/05 PLC, APPROX. 500 GALLON CONDENSATE TANK W/PUMPS, RUUD 150,000 BTU COOLING UNIT

3/4”X1”X 96” LAMINATED STICKERS, 4”X4” LUMBER BUNKS(15) STICKER RACKS

ABRASIVE SANDER 2008 KIMWOOD (RECONDITIONED) 4-HEAD 4’ WIDE RH ABRASIVE

PLANER W/(4) OPPOSED SANDING & FINISHING HEADS W/12-1/2”X60” CONTACT ROLLS, (2) TOSHIBA 200 HP/1800 RPM 441T FRAME SANDING DRIVES & (2) TOSHIBA 150 HP/1800 RPM 445T FRAME FINISHING DRIVES, GOBBLER FEED CHAINS W/AIR LOADING, AUTO BELT TRACKING, PINCH & FEED ROLLS, ANTI-KICK BACK, CHROMED IN & OUT GUIDE BARS, 22’ POWERED INFEED ROLLCASE W/(11) 6-1/2”X60” ROLLS, SKK 5 HP/190 RPM DRIVE, 20’ POWERED OUTFEED ROLLCASE W/(10) 8-1/2”X60” ROLLS, SKK 5 HP/190 RPM DRIVES, S/N: 50248, ALLEN BRADLEY INTELLICENTER 8-SECTION MCC W/(19) SWITCHES, (2) ALLEN BRADLEY SMC FLEX 150-F251NBD 200 HP DRIVES, (3) 20 HP & (2) 7-1/2 HP POWERFLEX 700 DRIVES, ALLEN BRADLEY INTELLICENTER 7-SECTION MCC W/(19) SWITCHES, (2) ALLEN BRADLEY SMC FLEX 150-F251NBD 200 HP DRIVES, (1) 25 HP & (6) 5 HP POWERFLEX 700 DRIVES

REMAN EQUIPMENT MEREEN JOHNSON 424-DC 3” AIR LOADED H-SERIES GANG RIPSAW,

S/N: 5652, 75 HP ARBOR DRIVE, 3 HP FEED DRIVE, 30-150 FPM, 24” ARBOR, FEED THRU DIP CHAIN, POWER PRESS ROLLS, 8’ POWERED INFEED ROLLCASE W/(5) 8-1/2”X24” ROLLS, KAMAN 8’ 4-STRAND 81X INFEED TRANSFER W/4’ 3-STRAND LOADING TRANSFER, SKK DOUBLE REDUCTION DRIVE, 7’ POWERED OUTFEED ROLLCASE W/(4) 8-1/2”X24” ROLLS, HOLD DOWN ROLL, SKK 3 HP/155 RPM DRIVE, (6) MINI LASERS, ALLEN BRADLEY INTELLICENTER 7-SECTION MCC W/(27) SWITCHES W/ALLEN BRADLEY SMC FLEX 150-F34NBD DRIVE, (1) 50 HP, (3) 7-1/2 HP & (1) 5 HP ALLEN BRADLEY POWERFLEX 700 DRIVES

1994 WEINIG H22AL 6-HEAD MOULDER, 8-5/8”X4-3/4” CAPACITY, APPROX. 7-1/2 HP BOTTOM, 5 HP RIGHT & LEFT, 7-1/2 HP TOP, 15 HP TOP & 7-1/2 HP BOTTOM HEADS, 2/8” SPINDLE, ELECTRICAL CABINET & SPARE HEADS (NOT INSTALLED)

WACO JONSEREDS BKL-RH 42” TWIN VERTICAL BAND RESAW W/NORDISK 15 HP/1745 RPM DRIVES, HYDRAULIC DRIVEN FEED THRU ROLLS, SPARE SAWS

BREAKDOWN & TILT HOISTS - STICKER RECLAIM SYSTEM TECO/TURNER 14 5-ARM X 101” MECHANICAL SANDER BREAKDOWN HOIST

W/HYDRAULIC OPERATED LOAD LEVELER SECONDARY HOIST FORKS, SKK 10 HP/20 RPM DOUBLE REDUCTION DRIVE, 35’ 6-STRAND INFEED TRANSFER W/LIFT ARMS, SKK 10 HP/56 RPM DRIVE, 19’ 6-STRAND INFEED TRANSFER W/SKK 7-1/2 HP/56 RPM DRIVE, 8-1/2’ 6-STRAND LUG DECLINE

MOCO 96” STICKER RECLAIM SYSTEM (AT SANDER) W/12”X28’ STICKER BELT TO 7’ UNSCRAMBLER TO 20’ 2-STRAND OVERHEAD CHAINS TO STICKER ACCUMULATOR BOX W/PNEUMATIC PACKING GATE, 38’ 2-STRAND BUNK TRANSFER

10’ 3-ARM X 51” MECHANICAL RE-ENTRY TILT HOIST (TO TRIMMER) W/BALDOR 7-1/2 HP MOTOR TO SKK 56 RPM REDUCER W/20’ 4-STRAND H78 RE-ENTRY TRANSFER W/GEARHEAD DRIVE

6’ 2-ARM X 101” MECHANICAL RE-ENTRY TILT HOIST (TO RIPSAW) W/30 HP MOTOR TO HITACHI REDUCER W/18’ 4-STRAND H78 RE-ENTRY TRANSFER W/TECO 5 HP MOTOR TO DAVID BROWN/RADICON 71:1 REDUCER

TRIMMER 2007 TECO/TURNER 14’ LH INDIVIDUALLY MOTORIZED TRIMMER

W/(10) 7-1/2 HP X 24” SAWS, ZERO, 2’, 4’, 6’, 7’, 8’, 9’, 10’, 11’ & 12’ SAWS, 2-STAGE CLD POSITIONED FENCE W/(2) ALLEN BRADLEY ULTRA 3000 SERVO CONTROLLERS, 20’ 6-STRAND 81X LUGGED FEED THRU TRANSFER W/(6) 6-1/2”X80” ROLLS & (2) SETS OF LIFT ARMS, CLEANOUT CONVEYOR, ALLEN BRADLEY INTELLICENTER 6-SECTION MCC W/(2) 7-1/2 HP & (3) 5 HP POWERFLEX 700 DRIVES, ALLEN BRADLEY 5561 PLC W/(3) ETHERNET, (2) COUNTER, (2) 2-AXIS SERVOS, (3) DC INPUT & (2) AC OUTPUT MODULES

LUG LOADER - GRADE MARK READERS - MOISTURE METERS 2007 PLC 200 NC604-12P LUG LOADER, S/N: 0712CHA02 W/5’ 5-STRAND

81X INFEED, GEARHEAD DRIVE W/ALLEN BRADLEY POWERFLEX 700 DRIVES, ALLEN BRADLEY MICROLOGIX PLC

2008 LUCIDYNE M5-200 GRADE MARK READER, S/N: 27872008 WAGNER APEX MOISTURE METER W/(5) SENSORS, S/N: 3183 (TRIMMER)2011 APEX OMEGA MOISTURE METER, S/N: OMEGA136 W/(4) MODEL 21870

SIDEWAYS SENSORS, S/N: 041910005, MOISTURE TESTER POTS (NOT INSTALLED)

SORTER 2007 TECO/TURNER 13’ 9-TRAY LH TRAY SORTER, 285’ 5-STRAND FEED THRU

TRANSFER W/(27) 3 HP/82 RPM DRIVES, 24’ 5-STRAND LUGGED INFEED INCLINE TRANSFER, 27’ 4-STRAND 6” BELT OUTFEED TIPPLE W/SKK 7-1/2 HP/56 RPM TOWER DRIVE, SKK 5 HP/56 RPM BELT DRIVES, 22’ 5-STRAND LUGGED DECLINE TRANSFER (TO PULL CHAINS) W/SKK 2 HP/230 RPM DRIVE, 100’ & 60’ 4-STRAND 81X PULL CHAINS W/GEARHEAD DRIVE, 25’ 2-STRAND 81X OUTFEED TRANSFER W/TOSHIBA 7-1/2 HP MOTOR TO SM CYCLO 195:1 DRIVE, ALLEN BRADLEY INTELLICENTER 9-SECTION MCC W/(41) SWITCHES W/(1) 15 HP & (1) 7-1/2 HP ALLEN BRADLEY POWERFLEX DRIVES, ALLEN BRADLEY CENTERLINE 5-SECTION MCC W/(22) SWITCHES W/(1) 15 HP, (3) 7-1/2 HP & (2) 5 HP ALLEN BRADLEY POWERFLEX DRIVES

(20±) ADJUSTABLE & FIXED LENGTH LUMBER PULL CARTS


STACKER 2007 MOCO 14’ LH MECHANICAL LUMBER STACKER W/(4) 48” LOWERING

ARMS, SECONDARY HOIST & PULL BACK, (3) ADJUSTABLE LATH PLACERS W/PACKER GATE (1/8”X1-1/4”X44” LATH), 12’ 4-STRAND 81X IN-FEED TRANSFER W/(4) STATION GRADE MARKING ROLLS, 18’ 4-STRAND 81X INFEED TRANSFER W/MOTOR TO SM CYCLO REDUCER, 10’ POW-ERED OUTFEED JUMP ROLLCASE W/(5) 8-1/2”X60” ROLLS W/MOTOR TO SM CYCLO REDUCER, 28’ OUTFEED ROLLCASE W/(11) 8-1/2”X60” ROLLS W/MOTOR TO REX REDUCER, ALLEN BRADLEY CENTERLINE 4-SECTION MCC W/(17) SWITCHES W/(2) 7-1/2 HP & (1) 2 HP ALLEN BRADLEY POWERFLEX DRIVES, ALLEN BRADLEY LOGIX 5561 PLC W/(2) ETHERNET, (2) AC INPUT, (4) AC OUTPUT & (2) DC INPUT MODULES, SERVO CABINET W/(7) REX ROTH INDRA DRIVES

BANDER SIGNODE Z20VC44 PLASTIC BANDER STATION W/Z20 PLASTIC

BANDING HEAD, S/N: 512587, TOP & SIDE SQUEEZE, BUMP GATE, PSD 119JSC BANDING FEEDER, 40 HP HYDRAULIC UNIT, 12’ HYDRAULIC POWERED INFEED & OUTFEED ROLLCASES W/(6) 8-1/2”X60” ROLLS, 30’ 5-STRAND H78 INFEED & OUTFEED TRANSFERS, S-DRIVE W/MOTOR TO REX DRIVE, PAINT STATION, ROLL BACK, ALLEN BRADLEY PLC W/(1) ETHERNET, (1) DC INPUT, (1) AC INPUT, (3) ANALOG OUTPUTS, PRINTER & COMPUTER, (7) ROLLS OF 5/8” X 7010 METER

HOG MONTGOMERY 18FS-RZF PUNCH & DIE TYPE HAMMER HOG, S/N: 226

W/TOSHIBA APPROX. 50 HP MOTOR, HORIZONTAL INFEED, BOTTOM DISCHARGE, UP TO 5 TPH

CUBER - CONVEYOR RECONDITIONED WARREN & BAERG 250W CUBER (APPROX. 1-8 TPH

CAPACITY), TOSHIBA 300 HP/1800 RPM MOTOR, TWIN AUGER MIXER, 11’ SINGLE AUGER MIXER CONVEYOR, ALLEN BRADLEY SMC FLEX 150-F480NBD DRIVE, TRAMCO 6” X 24” X APPROX. 100’ BULK FLO CONVEYOR, S/N: BF-1579

VIBRATORY CONVEYORS VIBRA PRO LS180900FS-1/4”(MS)107F-5HP, 18” X APPROX. 107’ VIBRATORY

CONVEYOR, S/N: 2338VIBRA PRO LS90600FS-1/4”(MS)60F-5HP, 12” X APPROX. 60’ VIBRATORY

CONVEYOR, S/N: 2347

BINS APPROX. 40-UNIT HYDRAULIC OPERATED CHIP BIN W/20 HP HYDRAULIC

UNITAPPROX. 24-UNIT CHIP BIN W/TRIPLE SCREW AUGER W/MOTOR TO SHAFT

MOUNTED REDUCER

BAGHOUSES - GRECON SYSTEM 1996 WESTERN PNEUMATICS 386 SANDER BAGHOUSE, S/N: FLT137-9619450,

40424 AIR TO CLOTH, MODEL 2020 ROTARY AIR LOCK, BAGHOUSE SWEEP W/PURGE FAN, 2008 CLARKES CP24 ABORT GATE, 2008 TWIN CITY 929-RBR-SW FAN & BLOWER, S/N: 08248083-2-1, TECO 200 HP/1800 RPM MOTOR, SPARE BAGHOUSE, PIPING

CARTER DAY CLGI144-RH-120 TRIMMER BAGHOUSE, S/N: 7471, ROTARY AIR LOCK, BAGHOUSE SWEEP W/PURGE FAN, 2008 CLARKES CP24 ABORT GATE, 2008 TWIN CITY 929-RB0-SW FAN & BLOWER, S/N: 08248083-3-1, TECO 100 HP/1800 RPM MOTOR, SPARE BAGS, PIPING

GRECON CC702 SPARE DETECTION & EXTINGUISHING SYSTEM W/DELUGE TANK, S/N: 3820

PACKAGE SAW 1990 HOLTEC STIHL ES121-F/SHK MOVABLE SAW UNIT, 6 METER UNIT

LENGTH, 90° TILTING GUIDE BAR, 11 KW SAW MOTOR, 1.5 KW HYDRAULIC DRIVE, APPROX. 12”X25’ CLEANOUT CONVEYOR

PLANER MILL ELECTRICAL 2013 SIEMENS 3000 AMP 3-SECTION MAIN2014 GE SPECTRA SERIES 3000 AMP 3-SECTION MAINALLEN BRADLEY INTELLICENTER 9-SECTION MCC W/(41) SWITCHES

W/(2) ALLEN BRADLEY DRIVESALLEN BRADLEY INTELLICENTER 8-SECTION MCC W/(19) SWITCHES





W/(5) ALLEN BRADLEY DRIVESALLEN BRADLEY CENTERLINE 5-SECTION MCC W/(22) SWITCHES

W/(6) ALLEN BRADLEY DRIVESALLEN BRADLEY CENTERLINE 4-SECTION MCC W/(17) SWITCHES

W/(3) ALLEN BRADLEY DRIVES(8) ALLEN BRADLEY SMC FLEX DRIVES TO 300 HP(3) 2013 ALLEN BRADLEY LOGIX 5571 PLC’SALL MCC’S & PLC’S ARE DEVICENET NETWORK ENABLED

CONVEYORS TRAMCO 6” X 24” X APPROX. 100’ BULK-FLO CONVEYOR, S/N: BF-1579APPROX. 112’ 6”X11-1/2” BOX CHAIN W/FLIGHTS COVERED CONVEYOR,

S-DRIVE, SKK 7-1/2 HP/68 RPM DRIVEAPPROX. 100’ 6”X11-1/2” BOX CHAIN W/FLIGHTS CONVEYOR, S-DRIVE, SKK

10 HP/68 RPM DRIVEAPPROX. 12”X18’ CLEATED BELT CONVEYOR W/BALDOR MOTOR TO

REDUCERNUMEROUS TRANSFERS

MILL SUPPORT EQUIPMENT & SUPPLIES MILLERMATIC 252 MIG WELDER, DIALARC 250 AC/DC WELDER, OXY/

ACETYLENE SET, ROD BOX, 2009 GRIZZLY G7948 DRILL PRESS, DEWALT DW718 DOUBLE BEVEL COMPOUND MITRE SAW, RYOBI BS903 VERTICAL BANDSAW, MAKITA 2414 14” CHOP SAW, SIGNODE RECHARGEABLE STRAPPER, (4) SIGNODE BANDING CARTS, SPARE POLY BANDINGS, STIHL HT56C GAS POLE SAW, CENTRAL HYDRAULIC 2-TON PALLET JACK, PORTA POWERS, DEEP CUT BANDSAW, WORM DRIVE SAW, AIR DRIVES, SOCKETS & WRENCHES, POWER TOOLS, GANG BOXES, (3) PORTA COOL EVAP COOLERS, (10) FLOOR FANS, (10) LADDERS, (2) ROLLING WAREHOUSE LADDERS, COME-ALONGS, CHAINS & RIGGING, CLAMPS, CONDUIT BENDERS, FLOORJACKS, VISES, STEEL TABLES, WHEEL PULLERS, ELECTRIC & HOSE REELS, PORTABLE HEATERS, EYEWASH STATIONS, FLAMMABLES CABINETS, CAMERAS, INTERCOMS, MILL CHAIN, SPROCKETS, CYLINDERS, HOSE, BELTS & BELTING, FILTERS, ELECTRICAL, BINS & PART TRAYS, STEEL STOCK & RACKS

PLANER MILL ROLLING STOCK 2009 DOOSAN D160S-5 FORKLIFT, 22,550 LB CAPACITY, DIESEL, 177” 2-STAGE

MAST W/FORK POSITIONERS, FINGERTIP CONTROLS, SIDE SHIFT, 8’ FORKS, DUAL PNEUMATIC TIRES, ENCLOSED CAB, HOUR METER READS: 16,572, S/N: LQ00259

2009 DOOSAN D160S-5 FORKLIFT, 22,550 LB CAPACITY, DIESEL, 177” 2-STAGE MAST W/FORK POSITIONERS, FINGERTIP CONTROLS, SIDE SHIFT, 8’ FORKS, DUAL PNEUMATIC TIRES, ENCLOSED CAB, HOUR METER READS: 19,589, S/N: LQ00258

2007 DOOSAN G70S-5 FORKLIFT, 12,200 LB CAPACITY, PROPANE, 217” 2-STAGE MAST W/FORK POSITIONERS, FINGERTIP CONTROLS, SIDE SHIFT, 46” FORKS, DUAL PNEUMATIC FORKS, ENCLOSED CAB, HOUR METER READS: 7,713, S/N: PG0019



2008 DOOSAN G70S-5 FORKLIFT, 12,200 LB CAPACITY, PROPANE, 217” 2-STAGE MAST W/FORK POSITIONERS, FINGERTIP CONTROLS, SIDE SHIFT, 46” FORKS, DUAL PNEUMATIC FORKS, ENCLOSED CAB, HOUR METER READS: N/A, S/N: PG00113

2001 HYSTER S100XL2 FORKLIFT, 9,200 LB CAPACITY, PROPANE, 184.3” 3-STAGE MAST W/SIDE SHIFT, 48” FORKS, SOLID TIRES, HOUR METER READS: 3,692, S/N: D004D10801Y

CLARK C500Y FORKLIFT, 14,025 LB CAPACITY, GAS ENGINE, 173” 2-STAGE MAST W/FORK POSITIONERS, SIDE SHIFT, 8’ FORKS, DUAL PNEUMATIC TIRES, S/N: Y105-104-58900B

FLEXCO 6’ CLAMP FORKS, SPARE TIRES, DUMPSTERS

TERMS AND CONDITIONS

10% BUYERS PREMIUM ON ALL ITEMS13% BUYERS PREMIUM ON ALL ONLINE PURCHASES

Due to insurance and safety reasons, children under 12 cannot be admitted

PAYMENT: Full payment must be made by no later than 4 pm, April 14th. Payment must be made by CASH, CASHIERS CHECK, WIRE TRANSFERS, MASTERCARD OR VISA ONLY. Checks are accepted ONLY with Bank Letter of Guarantee.

REMOVAL: No purchases may be removed during the auction unless announced by the auctioneer. Small items must be removed by 4:00 PM, Friday, April 21st. ALL EQUIPMENT MUST be removed no later than 4:00 PM, Friday, August 18th, 2017. (REMOVAL HOURS AND DEADLINES MAY BE MODIFIED BY AUCTIONEER’S ANNOUNCEMENT). Removal hours: 8:00 AM – 4:00 PM, Monday through Friday. NO WEEKEND OR HOLIDAY REMOVAL.

Upon award of bid buyers and/or their contractors take responsibility for any environmental issues they create (e.g. spilled hydraulic oil). Dismantlers are required to provide their own materials to contain & clean up any oil spillage.

Insurance: Dismantlers, contractors or buyers removing equipment are required to provide $2,000,000.00 dollar General Liability Insurance certificate showing the James G Murphy Company and Upper Columbia Mill as the additional insured parties. Insurance certificate and proof of workman’s compensation compliance must be on file at sale site or with the James G Murphy Co.

FIRE PROTECTION POLICY: NO CUTTING WITHOUT A PERMIT- Dismantlers required to provide their own fire hose & spray nozzles.- A signed burning permit issued to dismantlers will be displayed in cutting area- A limited number of burning permits will be issued. One burning permit per hose.- Each man using a cutting torch will have one firewatch with a hose while cutting- Firewatch to wet down before during and after cutting.- Firewatch to stay in area one hour after cutting is completed- Cutting hours will be announced at the auction

Warranty Disclaimer: ALL SALES ARE FINAL. All items are being sold “As Is, Where Is,” With All Faults and without any warranties as to merchantability of fitness for a particular purpose. The principal, the auctioneer, the advertising coordinator, and any of their agents makes no express or implied warranties of any type. All information was obtained from sources deemed reliable. Although every precaution has been taken to ensure accuracy, the principal, the James G Murphy Co., the advertising coordinator, and all of their agents shall not be responsible for any errors or omissions therein. Announcements made by the auctioneer at the time of sale take precedence over printed matter. Auctioneer reserves the right to sell accessories parts or attachments on a separate and/or aggregate basis

ABSENTEE BIDS: Absentee bids will be accepted with 25% Deposit.

AUCTIONEERS NOTE:

Preview will be on Tuesday, April 11th for both locations.To schedule an early preview it is required that you contact our

Portland office at503.463.4444 or email: [email protected]

Both locations will be sold by photo at their respective locations.

Day 1 - April 12 - Sawmill 77200 POLELINE ROAD, BOARDMAN OR

9AM Auction Start Time

Day 2 - April 13 - Abrasive Sander MIll71410 E COLUMBIA AVE, BOARDMAN OR

9AM Auction Start Time

Preview of equipment will be made available during the auction.

James G. Murphy Co.Commercial & Industrial AuctioneersP.O. Box 82160, Kenmore, WA 98028

PRESORTEDFIRST CLASS MAIL

U.S. POSTAGEPAID

SEATTLE, WAPERMIT NO. 963

503.463.4444 • 425.486.1246murphyauction.com

PUBLIC AUCTIONNO MINIMUMS - NO RESERVES

UPPER COLUMBIA MILLDAY 2

ABRASIVE SANDER MILL9AM - THURSDAY - APRIL 13PREVIEW 8-4PM, APRIL 1171410 E COLUMBIA AVE, BOARDMAN, OR 97818

DAY 1SAWMILL

9AM - WEDNESDAY - APRIL 12PREVIEW 8-4PM, APRIL 11

77200 POLELINE ROAD, BOARDMAN, OR 97818

1.800.426.3008 • 503.463.4444 • 425.486.1246 - murphyauction.com

no minimums - no reserves public...

Documents