nitttr kolkata

7/25/2019 NITTTR Kolkata

1/96

National Institute of Technical Teachers Training

&

Research, Kolkata(Established by the MHRD, Government of India)

PROGR MME

CALENDAR

April 2016March 2017

Pathfinder for Excellence in Technical Education

SHORT TERM TRAINING PROGRAMME


2/96

NITTTR Kolkata envisions to be the lead resource institute for

promoting excellence in technical education, management

education and vocational education & training system

To introduce emerging scientific technologies for development of effective teaching-learning

system in technical education

To increase the outreach of training by adopting flexible & Open Learning Technology

To integrate the world of work with the technical education system

To assist policy makers as a think-tank in formulating TVET strategies

To offer extension services and consultancy appropriate to TVET system, in collaboration with

industry and community partnership

To develop and introduce Quality Management System

To share experience and collaborate with national and international agencies involved in

technical education for mutual benefits

T

C

H

C

E

D

U

O

M

I

S

O

2


3/96

About Us

National Institute of Technical Teachers Training &Research (NITTTR), Kolkata was established in 1965

as Technical Teachers Training Institute, Calcutta. This was the first of four such Institutes (other threebeing at Chandigarh, Bhopal and Chennai) established by the Department of Education, Govt. of India as

fully centrally funded Autonomous Institution. The primary focus of the Institute is to provide in-service

training to the teachers and staff of Degree and Diploma level technical institutions and conduct activitiesrelated to the quality improvement of the technical education system of the country. NITTTR, Kolkata has

been actively involved in improvement of quality of the technical education system in various statesincluding those in the north-east through innovative academic interventions, providing assistance to policy

makers at the national and state levels, in formulation of educational plans, projects and theirimplementation in the fast changing scenario. By virtue of working closely over the last few decades, this

institute has developed a thorough understanding of the technical educational needs of the states in the

eastern region including those in the north-east. Govt. of India, in 2003, accorded national status to theInstitute, in recognition to the expert services rendered for overall improvement of quality of Technical

Education System. NITTTR, Kolkata acts as a catalyst in introducing changes in the various componentsof technical education system, plays a proactive role in identifying changes in the industry, technology,

economy and society and acts as a facilitator in this process of change.

Some of the notable national level projects in which the Institute is associated are Nodal agency to Centrally

Sponsored Community Development through Polytechnic Scheme, Designing & conducting AICTEsponsored Induction Training Programme for fresh teachers of engineering and polytechnic colleges,

Facilitating implementation of Centrally sponsored Scheme for Integrating Persons with Disabilities (PWD)in the Mainstream of Technical & Vocational Education etc.

The focal activities of the Institute are Short Term Training, Curriculum Development, Learning ResourcesDevelopment, Research in the field of Technical Education System, Educational Management and Extension

Services. Besides regular activities, the Institute has been offering, since 2003, AICTE approved M. Tech.

Degree Programme in Manufacturing Technology, affiliated to WBUT. During 2005-2006 two more M.

Tech. Programmes namely Multimedia & Software Systems and Mechatronics Engineering were started.

The M. Tech. Programme in Structural Engineering was also started from 2011-2012. The Institute hashighly qualified faculty members and excellent infrastructural support in the form of well-equipped

laboratories, computers, library facilities, Welding Centre, CAD/CAM and other resources. The institute hastwo Extension Centres one at Guwahati and the other in Bhubaneswar for reaching out to its clients in the

North-east and Orissa. At present this Institution is also focusing on others, Tea chers Training through

ICT Mode.

CONTENTS

Sl

No

Page

Nos

About Us i

Preface ii

Month-wise Programme 1-12

A. National Level Short Term TrainingProgrammes

I. Content Updating (CU) 13-34

II. Management (MGT) 35

III. Professional Skill Development (PS) 36-39

IV. Special Programme 40

B. E-Learning Programme 41-45

C. State Level Short-Term Training Programmes

at Extension Centres

(i) Bhubaneswar 46-52

(ii) Guwahati 53-57

Norms of the Programmes 58

i). In-House Programmes 58

ii). Special Programmes 58

iii). Collaborative Programmes 58

Participants Profile 59

Financial Norms 59

How to Apply 59

How to Reach NITTTR, Kolkata 60

General Instructions 61

Application Form 62Faculty Profile 63-90

E-mail Addresses and Phone

Numbers of Faculty Members

91

i


4/96

Regional

Workshop

7%

Curriculum

Related

31%NBA Related

50%

Management

Related

12%

WORKSHOP CONDUCTED 2015-16State-Wise Distribution of TraineesAru. Prd Assam

Manipur Mizoram

Meghalaya Nagaland

Tripura SikkimBihar Jharkhand

West Bengal Odisha

And Prd Karnataka

Kerala Delhi

Maharastra Chattisgarh

Hariyana Tamil Nadu

Pondicherry Telengana

Uttarakhand Chandigarh

J & K Rajasthan

PrefaceLike previous years, National Institute of Technical Teachers Tra ining &Research (NITTTR), Kolkata has prepared its Programme Calendar for the year 2016 2017

based on the training need analysis (TNA) conducted for the technical institutes of Eastern Region. The TNA questionnaire was prepared to have feedback on theattributes like past training experiences, content updating / refreshment advancement in respective subjects / specialization areas and Education, Pedagogy, Teaching

Skill Development, Curriculum Development, Rural & Community Development, Media Development, Maintenance of Office Equipment, Management, Communication

etc.

In order to fulfill the needs of technical teachers of the eastern regions, Short-Term Training programmes (STTP) in the following modes are planned.

1. Contact mode at NITTTR, Kolkata and/or the extension centres

2. ICT-based Programmes

3. In-House Programmes4. Demand-based Special Programmes

5. Collaborative Programmes

Trainings will be offered by1. Civil Engineering

2. Computer Science & Engineering

3. Electrical Engineering

4. Mechanical Engineering and5. Education & Educational Management related departments

The schedules of the trainings planned in this calendar are not exhaustive. The Institute also offers trainings based on specific needs of various stake holders including

Private Technical Institutes. The Institute also offers In-House training to fulfill the requirement of Faculty Development Programme (FDP) under TEQIP/NEQIP ofvarious Technical Institutes.

It is intended that all Technical Institutes of the eastern region will come up with their needs and take advantage of services provided by NITTTR, Kolkata. This will

help to upgrade the learning- teaching system of the institutes and in turn, will enrich the education system of the country.

NITTTR, Kolkata conducted UNESCO-UNEVOC supported International Capacity Development Programme on Training of Trainers in Utilizing Bio-Technology for

Sustainable Agriculture for Rural Youth during 23rdNovember 4 thDecember, 2015 in collaboration with Vivekananda Institute of Biotechnology, Nimpith, West

Bengal.

Following diagrams represent the focal activities of NITTTR, Kolkata, State-wise distribution of Trainees of STTP and Workshop conducted during the Academic year

2015-16:

ii


5/96

STTP SCHEDULE 2016 - 2017

www.nitttrkol.ac.in NITTTR, Kolkata 1

APRIL, 2016

1st Week 2nd Week 3rd Week 4th Week

BBSR01 PLC, LABVIEW and its applications

[S. Chattopadhyay](04-04-201608-04-2016)

BBSR02 Control Systems Analysis &

Design using MATLAB[Prasanta Sarkar](11-04-2016 - 15-04-2016) B

BSR03 Institutional Development

[Sekhar Chakraborty](18-04-2016 - 22-04-2016)

BBSR04 Disaster Management

[Uday Chand Kumar](25-04-2016 - 29-04-2016)

GUW01 Automata, Languages and Computation

[Samir Roy](04-04-201608-04-2016)

GUW02 CAD for Digital Electronics

[Soumitra Kumar Mandal](18-04-2016 - 22-04-2016)

CU27

Fundamentals of Computer System andBasic Computer Use[Rajeev Chatterjee](04-04-201608-04-2016)

CU90

Arc Welding Process[Arpan Kumar MondalDipankar Bose](11-04-2016 - 22-04-2016) C

U91

Mechanical Measurements and Control[Samiran Mandal](18-04-2016 - 22-04-2016) C

U01

Limit State Design of Steelstructures[Mithu Dey](25-04-2016 - 29-04-2016)

CU89

Basics of Thermal Engineering (ThermalEngineeringI)[Rayapati Subbarao](04-04-201608-04-2016) M

GT01

Institutional Management in TechnicalEducation Perspective[Sukanta Kumar Naskar](18-04-2016 - 22-04-2016)

CU53

Laboratory Experiment andStudents Project[Sagarika Pal](25-04-2016 - 29-04-2016)

CU124 Polymer Composites andNanocomposites

[Subrata Mondal](09-05-201613-05-2016)

PS01

Formulation of Operational Planfor MHRD Sponsored PWD

Scheme[Sheela Yadav Rai](25-04-2016 - 29-04-2016)
http://www.nitttrkol.ac.in/http://www.nitttrkol.ac.in/


6/96


2 NITTTR, Kolkata www.nitttrkol.ac.in

MAY, 2016

1st Week 2nd Week 3rd Week 4th Week 5th Week

BBSR05

Medical Instrumentation[Subrata Chattopadhyay](02-05-2016 - 06-05-2016)

BBSR06

Physics of Materials[Anuradha De](09-05-2016 - 13-05-2016)

BBSR07

Software Application inAnalysis and Design MultiStoried RCC Buildings[Santanu Bhanja](16-05-2016 - 20-05-2016) B

BSR08

Understanding Accounts,Procurement of Goods andoccupational health[Sailendra Nath MandalChanchal Kr. Mitra]

(23-05-2016 - 27-05-2016)

GUW03

Welding Processes & Physicsof Welding[Arpan Kumar Mondal](02-05-2016 - 06-05-2016) G

UW04

Development and Implementationof Staff Training Programme forPolytechnic Teachers[Sekhar Chakraborty](09-05-2016 - 13-05-2016)

GUW05

MATLAB Application inEngineering[Sagarika Pal](23-05-2016 - 27-05-2016) G

UW06

Electromagnetic Wave[Anuradha De](30-05-2016 - 03-06-2016)

CU02

Finite Element Method in CivilEngineering[Jagat Jyoti MandalTushar Kanti Dey](02-05-2016 - 13-05-2016)

CU29

Image Processing using MATLAB[Indrajit Saha](25-04-2016 - 29-04-2016)

CU03

Application of Auto CAD inEngineering Drawing[Tushar Kanti Dey ](16-05-2016 - 20-05-2016) C

U32

Database Design and Practice[Ranjan Dasgupta](23-05-2016 - 27-05-2016)

CU04

Refresher Course onStructural Analysis andDesign using Software[Santanu Bhanja](30-05-2016 - 10-06-2016)

CU

28

Software Design using UnifiedModeling Language[Samir Roy](02-05-2016 - 06-05-2016) CU

30

Uses of Some ScientificVisualization Tools[Kinsuk Giri](25-04-2016 - 29-04-2016) CU

93

Non-conventional MachiningProcess[Dipankar BoseArpan Kumar Mondal](16-05-2016 - 20-05-2016)

CU

54

Power electronics & Thyristorbased Control System[Soumitra Kumar Mandal](23-05-2016 - 27-05-2016)

CU31

Network Principles, Management& Administration[Rajeev Chatterjee](09-05-2016 - 20-05-2016)

CU94

Programming and Operationson CNC Machines[Nirmal Kumar Mandal](23-05-2016 - 27-05-2016)

CU95

How to write Thesis orResearch Paper[Rayapati Subbarao](30-05-2016 - 03-06-2016)

CU92

Applications of ThermalEngineering(Thermal EngineeringII)[Rayapati Subbarao](09-05-2016 - 13-05-2016)

CU125

Laboratory practice inChemistry andPetrochemical Testing[Sailendra Nath Mandal](30-05-2016 - 10-06-2016)

IC

T01 Hydraulics & Pneumatics

[Dipankar Bose]

(09-05-2016 - 13-05-2016)


7/96



JUNE, 2016


BBSR09 Rural Engineering

[Uday Chand Kumar](06-06-2016 - 10-06-2016)

BBSR10 Advanced Process Control &

Instrumentation System[Subrata Chattopadhyay](13-06-2016 - 17-06-2016)

CU33

IP Networking

[Rajeev Chatterjee](06-06-2016 - 17-06-2016) C

U05

Geotechnical Investigation & Testing

[Jagat Jyoti Mandal](13-06-2016 - 24-06-2016) C

U57

Medical Instrumentation

[Subrata Chattopadhyay](20-06-201601-07-2016) C

U06

Static and Dynamic Analysis of Seismic

Resistant RCC Buildings[Santanu Bhanja](27-06-2016 - 01-07-2016)

CU55

Control Systems - Analysis &Design using MATLAB[Prasanta Sarkar](06-06-2016 - 17-06-2016) C

U34

Topics of Discrete Mathematics[Samir Roy](13-06-2016 - 17-06-2016)

CU58

8085 & 8086, Microprocessor,Architecture, Programming &Interfacing[Soumitra Kumar Mandal]

(20-06-2016 - 01-07-2016)

CU07

Rural Engineering[Uday Chand Kumar](27-06-2016 - 01-07-2016)

CU96

AUTOCAD

[Nirmal Kumar Mandal ](06-06-2016 - 17-06-2016) C

U35

Numerical and Computational

Techniques for Engineers andResearchers [Kinsuk Giri](13-06-2016 - 17-06-2016)

CU126

Drinking Water, Adulteration of

Food and Health[Sailendra Nath Mandal](20-06-2016 - 01-07-2016)

CU36

Theory of Internet & Web Page Design

[Ranjan Dasgupta](27-06-2016 - 01-07-2016)

PS02

Leadership & Team Building in

academia[Habiba Hussain](06-06-2016 - 17-06-2016)

CU56

Exposure on MATLAB

[Anuradha De](13-06-2016 - 24-06-2016)

MGT02 Human Resource Management-

Technical Education Perspective[Sukanta Kumar Naskar](20-06-2016 - 24-06-2016)

CU37

Recent Advances in Optimization: Theory

and Applications[Kinsuk Giri](27-06-2016 - 01-07-2016)

PS03

Understanding Accounts and its propermaintenance for effective financialcontrol

[Sailendra Nath MandalChanchal Kumar Mitra](13-06-2016 - 17-06-2016)

MGT03

Laboratory Safety Management[Subrata Mondal](20-06-2016 - 24-06-2016)

PS04 Institutional Development[Sekhar Chakraborty]

(20-06-2016 - 01-07-2016)


8/96



JULY, 2016


BBSR11 Induction Training

[Subrata Chattopadhyay](11-07-2016 - 15-07-2016)

BBSR12 Construction Management

[Uday Chand Kumar](18-07-2016 - 22-07-2016)

BBSR13 Introduction to IS 800-2007

[Mithu Dey](25-07-2016 - 29-07-2016)

CU38

Data Structures and Algorithms[Samir Roy]

(04-07-2016 - 15-07-2016)CU08

Introductory Course on StructuralDynamics & Earthquake Engineering

[Jagat Jyoti Mandal](11-07-2016 - 15-07-2016) C

U39

Design of Business Applicationsusing Software Engineering

Approach[Ranjan Dasgupta](18-07-2016 - 29-07-2016)

CU61

Power Generation from EnergyResources

[Sheela Yadav Rai](25-07-2016 - 29-07-2016)

CU59

Electromagnetic Wave

[Anuradha De](11-07-2016 - 15-07-2016) C

U98

Turning, Milling & Drilling

[Dipankar BoseSamiran Mandal](18-07-2016 - 29-07-2016)

CU62

Simulation and Analysis of Nonlinear

and Adaptive Control Systems[Urmila Kar](25-07-2016 - 29-07-2016)

CU60

PLC Programming and Applications[Sagarika Pal]

(11-07-2016 - 22-07-2016) PS05

Effective Teaching[Habiba Hussain]

(18-07-2016 - 29-07-2016) CU63

Electrical Safety & Code of Practices[Prasanta Sarkar]

(25-07-2016 - 29-07-2016)

CU98

Computer Numerical Controlled

Machines: Constructional Featuresand Programming[Nirmal Kumar MandalSamiran Mandal](11-07-2016 - 22-07-2016)

CU64

Applied Physics experiments with /

without computer interfacing kit foryoung Engineers and Scientists[Anuradha De](25-07-2016 - 05-08-2016)

C

U127

Membranes for Water Treatment:Challenges and Opportunities[Subrata Mondal]

(11-07-2016 - 15-07-2016)

ICT02

Engineering Thermodynamics[Rayapati Subbarao](18-07-2016 - 22-07-2016)


9/96



AUGUST, 2016


BBSR14

Design and Implementation of Technical

Curricula in Recent Perspective.[Urmila Kar & S. K. Naskar](01-08-2016 - 05-08-2016) B

BSR15

DC Machines & Transformers


BBSR16

Watershed Management

[Uday Chand Kumar](29-08-2016 - 02-09-2016)

GUW07

Refresher Course on the Basic andAdvanced Features of a Structural

Engienering Software[Santanu Bhanja](01-08-201605-08-2016)

GUW08

Environmental Pollution and itssolution

[Sailendra Nath Mandal](22-08-2016 - 26-08-2016) G

UW09

Design and Detailing of ReinforcedConcrete Structural Elements

[Jagat Jyoti Mandal](29-08-2016 - 02-09-2015)

CU09

Disaster Management[Uday Chand Kumar](01-08-2016 - 05-08-2016) C

U10

Laboratory Practice on ConcreteMaterials[Mithu Dey](08-08-2016 - 12-08-2016)

CU40

Introduction to Operating System[Indrajit Saha](22-08-2016 - 26-08-2016)

CU102

Collection and Analys of ExperimentalData in Laboratory and Workshop[Nirmal Kumar Mandal ](29-08-2016 - 02-09-2016)

EDPM0 Awareness on EHS and ISO 14001

[Sekhar Chakraborty]

(01-08-2016 - 05-08-2016) CU65

CAD for Digital Electronics[Soumitra Kumar Mandal]

(08-08-2016 - 12-08-2016) CU66

Optical Fibre & Laser: Principles& Applications

[Anuradha De](22-08-2016 - 26-08-2016)

CU103

Numerical Methods for FluidDynamics

[Kinsuk Giri ](29-08-2016 - 02-09-2016)

CU99

Introduction to Robotics[Samiran Mandal](01-08-2016 - 05-08-2016)

CU100

Advanced Manufacturing System[Nirmal Kumar Mandal ](08-08-2016 - 12-08-2016)

CU67

Application of MATLAB ControlSystem, Image Processing andFuzzy Logic Tool Box

[Sagarika Pal & Urmila Kar](22-08-2016 - 02-09-2016)

PS08

Development and Implementation ofStaff Training Programme forPolytechnic Teachers

[Sekhar Chakraborty](29-08-2016 - 02-09-2016)

SC09

Water Quality, Purification and Health[Sailendra Nath Mandal](01-08-2016 - 12-08-2016) P

S06

Role of Technical Institutions inCommunity Development[Sheela Yadav Rai](08-08-2016 - 12-08-2016)

CU101

CFD in Turbomachinery[Rayapati Subbarao](22-08-2016 - 26-08-2016)

PS07

Microteaching for improving

teaching skills[Habiba Hussain](22-08-2016 - 26-08-2016)

ICT03

Concept Teaching in SoilMechanics[Jagat Jyoti Mandal]

(08-08-2016 - 12-08-2016) ICT04

Strategic Management[Sukanta Kumar Naskar](22-08-2016 - 26-08-2016)

ICT05

Fundamentals of Limit State Methodof Design of RC Structures withSpecial Emphasis on Earthquake

Resistance[Santanu Bhanja]

(29-08-2016 - 02-09-2016)


10/96



SEPTEMBER, 20161st Week 2nd Week 3rd Week 4th Week

BBSR17 Power Generation from Energy Resources

[Sheela Yadav Rai](05-09-2016 - 09-09-2016)

BBSR18 Sensors, Transducers & Actuators


GUW10 Teaching of Theory of Machines

[Samiran Mandal](05-09-2016 - 09-09-2016)

GUW11 Effective Training

[Sukanta Kumar Naskar](19-09-2016 - 23-09-2016)

CU11

Drawing, Analysis and Design of structures byLimit State Method using software.[Mithu Dey]

(05-09-2016 - 16-09-2016)CU41

Compiler Design[Samir Roy](19-09-2016 - 23-09-2016) C

U70

Semiconductor Devices & Solar PV Module[Anuradha De](26-09-2016 - 30-09-2016)

CU68

Modelling and Simulation of MechatronicSystem[Prasanta Sarkar]

(05-09-2016 - 16-09-2016) CU69

Simulation & Analysis of Electrical Circuits[Urmila Kar](19-09-2016 - 23-09-2016)

CU71

Laboratory & Workshop Manual for Electrical,Electronics and Instrumentation Engineering[Soumitra Kumar Mandal

Sagarika Pal](26-09-2016 - 07-10-2016)

CU104

Design and Modeling of various thermal

systems[Rayapati Subbarao]

(05-09-2016 - 09-09-2016)CU105

Computer Aided Design

[Nirmal Kumar Mandal ](19-09-2016 - 23-09-2016)

CU130

Instruments to Measure Air and Water quality

[Sailendra Nath Mandal](26-09-2016 - 07-10-2016)

PS09

Procurement and custody of Goods andServices[Sailendra Nath Mandal

Chanchal Kumar Mitra](05-09-2016 - 09-09-2016)

CU106

TIG & MIG Welding Process[Dipankar BoseArpan Kumar Mondal]

(19-09-2016 - 30-09-2016)PS11

Action Research[Habiba Hussain](26-09-2016 - 30-09-2016)

CU129

Functional Textiles and Protections[Subrata Mondal](19-09-2016 - 23-09-2016)

PS10

Quality Improvement in Institutional

Activities[Sekhar Chakraborty]

(19-09-2016 - 30-09-2016)

ICT06

Laboratory Instruction

[Soumitra Kumar MandalSagarika Pal](05-09-2016 - 09-09-2016 )


11/96



OCTOBER, 2016


B

BSR19 Project Management

[Sukanta Kumar Naskar]

(03-10-2016 - 07-10-2016)

B

BSR20 MATLAB Application in Engineering

[Sagarika Pal]

(17-10-2016 - 21-10-2016)

B

BSR21 Real Estate Management

[Uday Chand Kumar]

(24-10-2016 - 28-10-2016)

GUW12

Cyber Security[Indrajit Saha](31-10-2016 - 04-11-2016)

CU72

Teaching Control (Linear & Nonlinear)Systems[Urmila Kar]

(17-10-2016 - 28-10-2016)CU73

Industrial Automation using PLC, DCS &SCADA[Sagarika Pal]

(24-10-2016 - 28-10-2016)CU12

Analysis and Design of ShallowFoundations[Jagat Jyoti Mandal]

(31-10-2016 - 04-11-2016)

C

U74

Laser & Image processing[Anuradha De](24-10-2016 - 28-10-2016)

C

U131

Engineering Chemistry experimentsand Safety[Sailendra Nath Mandal]

(31-10-2016 - 04-11-2016)

CU107

Mechanical Engineering Materials andApplications[Arpan Kumar Mondal]

(24-10-2016 - 28-10-2016)

PS12

Pedagogy of Teaching Mathematics[Kinsuk Giri](24-10-2016 - 28-10-2016)


12/96



NOVEMBER, 2016


BBSR22 Intellegent Search Techniques

[Samir Roy]

(07-11-2016 - 11-11-2016)BBSR23 Laboratory Development

[Subrata Chattopadhyay]

(21-11-2016 - 25-11-2016)BBSR24 Mechatronics & Automation

[Subrata Chattopadhyay]

(28-11-2016 - 02-12-2016)

GUW13

Developing Entrepreneurship Among

Students-role of Polytechnic Teachers[Sekhar Chakraborty](07-11-2016 - 11-11-2016) G

UW14

Design and implementation of

technical curricula in recentperspective.[Urmila Kar & S. K. Naskar](15-11-2016 - 19-11-2016)

GUW15

Estimating & Costing of Non-

Conventional Energies[Sheela Yadav Rai](21-11-2016 - 25-11-2016) G

UW16

Advances in Welding

[Arpan Kumar Mondal](28-11-2016 - 02-12-2016)

CU13

Solid Waste from the Society &Environmental Sanitation

[Uday Chand Kumar](07-11-2016 - 11-11-2016)

CU75

Electrical Machines and Drives[Soumitra Kumar Mandal]

(21-11-2016 - 25-11-2016)CU14

Waste Management[Sailendra Nath Mandal]

(28-11-2016 - 09-12-2016)

CU42

Multimedia in Education Technology[Indrajit Saha](07-11-201618-11-2016)

CU76

Applied Physics experiments with /without computer interfacing kit foryoung Engineers and Scientists

[Anuradha De](21-11-2016 - 02-12-2016)

C

U110

CAD/CAM[Nirmal Kumar Mandal ](28-11-2016 - 02-12-2016)

CU108

Developments in Power Plants andAlternative Fuels[Rayapati Subbarao](07-11-2016 - 11-11-2016) C

U109

Engineering Thermodynamics and itsApplications[Rayapati Subbarao](21-11-2016 - 25-11-2016) C

U111

Development of Mechanical EngineeringLaboratory Experiments & InstructionSheets[Samiran Mandal](28-11-2016 - 02-12-2016)

CU132

Waste Water Treatment: PollutionControl and Reuse

[Subrata Mondal](07-11-2016 - 11-11-2016)

PS13

Essentials of Outcome basedEducation

[Habiba Hussain](21-11-2016 - 25-11-2016)

M

GT05 Problem Solving & Decision Making

[Sukanta Kumar Naskar]

(07-11-2016 - 11-11-2016)

ICT07

Environmental Pollution and HealthHazards[Sailendra Nath Mandal](07-11-2016 - 11-11-2016)

ICT08

Teaching on structural analysisand Introduction to FEM[Mithu Dey](15-11-2016 - 19-11-2016)


13/96



DECEMBER, 20161st Week 2nd Week 3rd Week 4th Week

BBSR25 Fundamental Concepts of Geotechnical

Engineering[Jagat Jyoti Mandal](05-12-2016 - 09-12-2016) B

BSR26 Engineering Thermodynamics

[Rayapati Subbarao](19-12-2016 - 23-12-2016)

BBSR27 Causes and effects of

Environmental Pollution[Sailendra Nath Mandal](26-12-2016 - 30-12-2012)

GUW17 Properties of Materials and Processes[Nirmal Kumar Mandal ]

(05-12-2016 - 09-12-2016)GUW18 Control Systems Analysis & Designusing MATLAB

[Prasanta Sarkar]

(19-12-2016 - 23-12-2016)

CU15

Philosophy of limit state method ofdesign and behaviour of RC Structures

under overloading[Santanu Bhanja](05-12-2016 - 09-12-2016)

CU16

Testing of material for concrete anddesign of concrete mixes

[Tushar Kanti Dey ](12-12-2016 - 23-12-2016) C

U17

Introduction to IS 800-2007[Mithu Dey]

(19-12-2016 - 23-12-2016)CU18

Surveying by Total Station[Santanu Bhanja]

(26-12-2016 - 30-12-2016)

CU43

Mathematical Logic[Samir Roy](05-12-2016 - 09-12-2016) C

U44

Design & Development of e-learningSystem[Rajeev Chatterjee]

(12-12-2016 - 23-12-2016)CU79

Application of MATLAB in ElectricalEngineering[Urmila Kar]

(19-12-2016 - 30-12-2016)CU45

Mathematical and Technical Writingusing LaTeX[Kinsuk Giri & Indrajit Saha ]

(26-12-2016 - 30-12-2016)

CU77 Renewable Energy Sources andEmerging Technologies

[Sheela Yadav Rai](05-12-2016 - 09-12-2016)

CU113 Statistics for Research

[Samiran Mandal](12-12-2016 - 16-12-2016) C

U114 Manufacturing Process

[Arpan Kumar Mondal](19-12-2016 - 23-12-2016) C

U80 Exposure on MATLAB[Anuradha De]

(26-12-2016 - 06-01-2017)

CU78

Modern Control & MATLAB Simulation

[Prasanta Sarkar](05-12-2016 - 16-12-2016)

MGT06 Research Methodology in

Management[Sukanta Kumar Naskar](12-12-2016 - 16-12-2016)

PS14

Outcome based Assessment

[Habiba Hussain](19-12-2016 - 23-12-2016) C

U81

LABVIEW & MATLAB Applications in

Engineering[S. K. Mandal & Sagarika Pal](26-12-2016 - 06-01-2017)

CU112

Theory and Practices of VariousWelding Processes[Arpan Kumar Mondal & D. Bose]

(05-12-2016 - 09-12-2016)PS15

Making Educational Video Films[Sekhar ChakrabortyYagamay Das & Prashanta Pal]

(19-12-2016 - 30-12-2016)CU115

Fundamentals and Applications ofNanomaterials[Subrata Mondal]

(26-12-2016 - 30-12-2016)

CU1

16

Computations and Optimizationwith MATLAB[Nirmal Kumar Mandal ](26-12-2016 - 06-01-2017)

ICT09

Rural Engineering[Uday Chand Kumar](05-12-2016 - 09-12-2016) IC

T10

Renewable Energy Sources andEmerging Technologies[Sheela Yadav Rai]

(12-12-2016 - 16-12-2016)


14/96



JANUARY, 2017


BBSR28 Numerical Methods for Fluid

Dynamics[Kinsuk Giri ](02-01-2017 - 06-01-2017) B

BSR29 Intelligent Textile Materials

[Subrata Mondal](09-01-2017 - 13-01-2017)

BBSR30 Strategic Management

[Sukanta Kumar Naskar](16-01-2017 - 20-01-2017)

BBSR31 Lesson Planning

[Samiran Mandal]30-01-2017 - 03-02-2017)

GUW19 Networking Principle

[Rajeev Chatterjee](02-01-2017 - 06-01-2017)

GUW20 Introduction to Python Programming

[Tushar Kanti DeyRajeev Chatterjee]

(09-01-2017 - 13-01-2017)

CU19

AutoCAD for Engineers

[Mithu Dey](02-01-2017 - 06-01-2017) C

U21

Software Application in Analysis and

Design Multi Storied buildings[Santanu Bhanja](09-01-2017 - 13-01-2017)

CU22

Analysis & Design of Flexible

Pavements[Jagat Jyoti Mandal](16-01-2017 - 20-01-2017)

CU48

Advance Programming in C

(Workshop of Co-ordinators)(Lecture Session over ICT)(Hands on Practice at NITTTR, Kolkata)[Rajeev Chatterjee]

(30 & 31-01-201720 & 21-02-201727-02-2017 01-03-2017)C

U20

Sustainable Rural Development

Alternative Source of Energy[U.C.Kumar & A. Rahaman ](02-01-2017 - 06-01-2017)

CU82

Electrical Power System & Protection

[Soumitra Kumar Mandal](09-01-2017 - 13-01-2017) C

U23

Watershed Management

[Uday Chand Kumar](16-01-2017 - 20-01-2017)

CU46 Design of Payroll Systems usingOracle

[Ranjan Dasgupta](02-01-2017 - 13-01-2017)

CU117 Theory and Practice on MechanicalTesting of Metals

[Arpan Kumar Mondal & D. Bose](09-01-2017 - 20-01-2017)

CU47 Computational Intelligence forKnowledge Extraction

[Indrajit Saha & Samir Roy](16-01-2017 - 27-01-2017)

CU119

Engineering Materials and Processes

[Arpan Kumar Mondal](30-01-201704-02-2017)

CU133

Operation and maintenance of

different Water and PetrochemicalTesting Kits[Sailendra Nath Mandal](09-01-2017 - 20-01-2017)

CU83

Power Electronics Applications

[Sheela Yadav Rai](16-01-2017 - 20-01-2017)

PS16

Soft Skills for teachers[Habiba Hussain]

(09-01-2017 - 20-01-2017)CU118

Tool and Die Design[Samiran Mandal]

(16-01-2017 - 20-01-2017) CU84

Advanced Control Systems & MATLABSimulation

[Prasanta Sarkar](23-01-2017 - 03-02-2017)

ICT11

BBSR

Advanced Process Control (ICT)[Subrata Chattopadhyay](09-01-2017 - 13-01-2017) IC

T12

Optical Fibre & Laser: Principles &Applications[Anuradha De]

(16-01-2017 - 20-01-2017)


15/96



FEBRUARY, 2017


BBSR32

Solid Waste from the Society &

Environmental Sanitation[Uday Chand Kumar](06-02-2017 - 10-02-2017) B

BSR33

Application of Software in Seismic

Resistant Structure Design[Santanu Bhanja](13-02-2017 - 17-02-2017) B

BSR34

Introduction to Cryptography

[Indrajit Saha](20-02-2017 - 24-02-2017)

BBSR35

Skill Developments in Laboratory

and Workshops[Nirmal Kumar Mandal ](27-02-2017 - 03-03-2017)

GUW21 Waste Water Treatment: Pollution

Control and Reuse[Subrata Mondal]

(06-02-201710-02-2017) GUW22 Engineering Thermodynamics

[Rayapati Subbarao](13-02-2017 - 17-02-2017)

GUW23 Quality Management & its

Implementation[Sukanta Kumar Naskar]

(27-02-2017 - 03-03-2017)

CU24

Testing of Pavement Material[Jagat Jyoti MandalTushar Kanti Dey ](06-02-2017 - 17-02-2017)

CU50

Introduction to Python Programming[Rajeev Chatterjee](13-02-2017 - 17-02-2017)

CU87

Power Generation from EnergyResources[Sheela Yadav Rai](20-02-2017 - 24-02-2017)

CU51

Introduction to Artificial NeuralNetworks[Samir Roy & Indrajit Saha](27-02-2017 - 03-03-2017)

CU49

Fuzzy and Rough Set Theory

[Samir RoyIndrajit Saha](06-02-2017 - 10-02-2017) C

U134

Linear Algebra and Differential Equations

[Kinsuk Giri ](13-02-2017 - 17-02-2017)

MGT07

Occupational Health & Safety

Management, OHSAS :1801[Sekhar ChakrabortyTushar Kanti Dey ]

(20-02-2017 - 24-02-2017)

PS18

Assessment Tools for Outcome

Based Education[Urmila Kar](27-02-201703-03-2017)

CU85

Power System Analysis[Sheela Yadav Rai]

(06-02-2017 - 10-02-2017) PS17

Effective Training[Sukanta Kumar Naskar]

(13-02-2017 - 17-02-2017)

CU86

Sensors, Transducers & Signal

Conditioning[Sagarika Pal](06-02-2017 - 17-02-2017)

CU120

Skill Development in Workshop and

Laboratory[Arpan Kumar MondalDipankar Bose](06-02-2017 - 17-02-2017)

ICT13

Safety Management in ChemicalLaboratory

[Subrata Mondal](27-02-2017 - 03-03-2017)


16/96



MARCH, 2017


BBSR36 Surveying by Total Station

[Jagat Jyoti Mandal & Tushar Kanti Dey](06-03-2017 - 10-03-2017)

BBSR37 Fluid Mechanics & Fluid Machines

[Dipankar Bose](20-03-2017 - 24-3-2017)

BBSR38 Introduction to e-learning

[Rajeev Chatterjee](27-03-2017 - 31-03-2017)

GUW24 8085 & 8086, Microprocessor, Architecture,Programming & Interfacing

[Soumitra Kumar Mandal](06-03-2017 - 10-03-2017) G

UW25 Numerical Methods for FluidDynamics

[Kinsuk Giri ](20-03-2017 - 24-03-2015) G

UW26 Advanced Process Control &Instrumentation System


CU52

Introduction to DBMS[Ranjan Dasgupta](06-03-2017 - 17-03-2017) C

U25

Laboratory tests on Civil EngineeringMaterial[Mithu Dey]

(20-03-2017 - 31-03-2017)CU26

Construction Management[Uday Chand Kumar](27-03-2017 - 31-03-2017)

CU88

Digital Control using MATLAB[Prasanta Sarkar](06-03-2017 - 10-03-2017)

CU122

Modern Welding Methods[Dipankar BoseArpan Kumar Mondal](20-03-2017 - 24-03-2017)

CU123

Automobile Engineering[Samiran Mandal](27-03-2017 - 31-03-2017)

CU121

Power Plant Engineering

[Rayapati Subbarao](06-03-2017 - 10-03-2017) PS1

9Developing Instructional Media

[Sekhar Chakraborty](20-03-2017 - 24-03-2017) PS2

0Community Development through

Technical Institutes[Sheela Yadav Rai](27-03-2017 - 31-03-2017)

ICT14

Control & Automation[Soumitra Kumar MandalSagarika Pal]

(06-03-2017 - 10-03-2017) ICT15

Design and Implementation ofOutcome Based Curriculum[Urmila Kar]

(20-03-2017 - 24-03-2017) ICT16

Indian Electricity Rules and Code ofPractices[Prasanta Sarkar]

(27-03-2017 - 31-03-2017)


17/96



A. NATIONAL LEVEL SHORT TERM TRAINING PROGRAMMES

The schedule of Short Term Training Programmes (STTP) to be conducted by NITTTR, Kolkata during the year 20162017 is given below.

I. CONTENT UPDATING (CU) VENUE: NITTTR, KOLKATA

Sl.No

ProgCode

Programme TitleProgramme

Co-ordinator (s)

Date

Week Programme Objectives

From To

1. CU01 Limit State Design of Steelstructures

Mithu Dey 25-04-2016 29-04-2016 1 After attending the course the participants will be able to

appreciate the understanding principles on plastic analysis of Steel

structures. design the different structural elements by limit state method.

familiar with the new code IS 800 : 2007

2. CU02 Finite Element Method in

Civil Engineering

Jagat Jyoti Mandal

Tushar Kanti Dey

02-05-2016 13-05-2016 2 After attending the course the participants will be able to

explain basic concept of finite element method in Civil Engineering

develop formulation for simple structural problems by using finite

element use a standard software for solving simple structural problems

3. CU03 Application of Auto CAD inEngineering Drawing Tushar Kanti Dey 16-05-2016 20-05-2016 1 After attending the course the participants will be able to draw basic drawing

draw different sections of structures

draw 2D and 3D drawing

4. CU04 Refresher Course on

Structural Analysis and

Design using Software

Santanu Bhanja 30-05-2016 10-06-2016 2 After attending the programme, the participants will be able to

Understand the role of software in structural analysis and design

Know the basic features of a universally accepted standard software

Develop the software simulation of the prototype structure

Analyse and design real-life civil engineering structures

Participants will be awarded a complete unlimited licenced versionof STAAD.Pro v8i & Staad.foundation Advanced v8i for personal useon their PCs for full one year for academic purpose

5. CU05 Geotechnical Investigation

& Testing

Jagat Jyoti Mandal 13-06-2016 24-06-2016 2 After attending the course the participants will be able to

explain basic concepts on laboratory and field tests of soil as per

requirement of Civil engineering Diploma curriculum guide students in conducting different laboratory experiments and

carryout field tests related to determination of related parameters

demonstrate different tests on soil for determination of strength andcompressibility parameter of soil


18/96



Sl.No

ProgCode


Co-ordinator (s)

Date

Week

Programme ObjectivesFrom To

6. CU06 Static and Dynamic

Analysis and Design of

Seismic Resistant RCC

Buildings


Appreciate the underlying principles of earthquake resistant design of

RC buildings

Differentiate between Static and Dynamic analysis and know thedomain of their application

Use software in Seismic Analysis of RC Buildings

Be familiar with the relevant clauses of IS:1893, IS:4326 and IS:13920

Participants will be awarded a complete unlimited licenced versionof STAAD.Pro v8i & Staad.foundation Advanced v8i for personal useon their PCs for full one year for academic purpose

7. CU07 Rural Engineering Uday Chand Kumar 27-06-2016 01-07-2016 1 After attending the programme, the participants will be able to

identify the need of the village people.

describe the rain water harvesting.

describe the need of sanitation.

understand the different scheme of government.

8. CU08 Introductory Course on

Structural Dynamics &Earthquake Engineering


explain basic concept of structural Dynamics

apply these concepts to solve simple structural Dynamics problems apply these concepts to analyse simple Civil Engineering structures

subjected to Earthquake loading

9. CU09 Disaster Management Uday Chand Kumar 01-08-2016 05-08-2016 1 After attending the programme, the participants will be able to

define disaster

describe different types of disaster

describe types of safety require before disaster

take remedial action after disaster.

10. CU10 Laboratory Practice on

Concrete Materials


explain the physical significance of laboratory tests on ConcreteMaterials.

demonstrate to the students on different tests of Concrete Materials

understand the concrete mix design


19/96



Sl.No

ProgCode


Co-ordinator (s)

Date

Week


11. CU11 Drawing, Analysis andDesign of structures by

Limit State Method usingsoftware.


appreciate the importance of the Limit State Method.

compare with Working Stress Method.

understand the different methods of structural analysis

design the different structural elements (RCC & Steels structures) byLimit State Method.

use of software to drawing analysis and design the different Structural

elements.

12. CU12 Analysis and Design ofShallow Foundations


determine settlement and bearing capacity of shallow foundations

design different types of shallow foundations as per the codal

recommendations.

teach the related topics in more efficient manner

13. CU13 Solid Waste from the

Society & EnvironmentalSanitation

Uday Chand Kumar 07-11-2016 11-11-2016 1 After attending the programme, the participants will be able to

describe different type of waste

identify the importance of waste management

describe the types of waste generated in the society

identify hazards waste

identify needs of sanitation identify need of Swachhatha Abhiyan

14. CU14 Waste Management Sailendra NathMandal

28-11-2016 09-12-2016 2 After attending the programme the participants will be able to acquire

knowledge of basic concept of wastewater, sampling, preservation,

analysis, interpretation of result and wastewater treatment, Solid wastemanagement

skill of handling equipment, performing experiments, interpreting

results, preparing test report, providing laboratory instructions todevelop inquiring attitude among the student and evaluation of

laboratory performance in related to wastewater analysis/ treatmentlaboratory,

attitude of hand-on working in the laboratory/field

15. CU15 Philosophy of Limit State

Method of Design andbehaviour of RC Structures

under Overloading


identify the principles underlying the limit state method of reinforcedconcrete design

understand the fundamental principles for design under seismic forcesand differentiate them from design against other types of loads

be familiar to a computer software for design of RC structural elements


20/96



Sl.No

ProgCode


Co-ordinator (s)

Date

Week


16. CU16 Testing of Material forConcrete and Design of

Concrete Mixes

Tushar Kanti Dey 12-12-2016 23-12-2016 2 After attending the course the participants will be able to

find out the various properties of materials

design different proportions of concrete mix

17. CU17 Introduction to IS 800-

2007

Mithu Dey 19-12-2016 23-12-2016 1 After attending the program, participants are expected to be able to

appreciate the understanding principles on plastic analysis of Steelstructures.

design the different structural elements as per new codes:

familiar with the new code IS 800 : 2007

18. CU18 Surveying by Total Station Santanu Bhanja 26-12-2016 30-12-2016 1 After attending the programme, the participants will be able to be introduced to Total Station

understand the processes involved in operating Total Station

carry out traversing using Total Station

assimilate and store data from site and plot the traverse.

19. CU19 AutoCAD for Engineers Mithu Dey 02-01-2017 06-01-2017 1 After attending the course the participants will be able to

know the different commands of the Software

draw the 2D and 3D

appreciate the use of AutoCAD in Engg. Field.

20. CU20 Sustainable RuralDevelopmentAlternative

Source of Energy

Uday Chand KumarAshadur Rahaman

02-01-2017 06-01-2017 1 After attending the programme, the participants will be able to describe Rural Development

define Sustainable Development

apply Different Alternate Source of Energy

workout an Energy Audit

21. CU21 Analysis and Design of

Multi Storied Buildings

using a Software Dedicated

for Building Design only


be acquainted with the basic methodology of software application in

structural analysis and design acquire the fundamentals of analysis against all types of loads

be familiar with the design of RC buildings

Know the basic features of a universally accepted standard software forbuildings - ETABS

22. CU22 Analysis & Design ofFlexible Pavements


comprehend the principles of analysis and design of flexible pavement

as per the recommendations of IRC

able to design flexible pavement following the guidelines of IRC

impart acquired knowledge to students in a systematic manner


21/96



Sl.No

ProgCode


Co-ordinator (s)

Date

Week


23. CU23 Watershed Management Uday Chand Kumar 16-01-2017 20-01-2017 After attending the programme, the participants will be able to

define the watershed

describe the need of soil conservation.

identify the different structure of water harvesting

24. CU24 Testing of PavementMaterial

Jagat Jyoti MandalTushar Kanti Dey


explain basic concepts on laboratory and field tests of various pavement

material (soil & bituminous) as per requirement of Civil engineeringDiploma curriculum

guide students in conducting different laboratory experiments and

carryout field tests related to determination of related parameters

demonstrate different tests on various pavement material required for

design of flexible pavements

25. CU25 Laboratory tests on Civil

Engineering Material


develop Skill & Knowledge on the fundamentals involved in testing ofvarious ingredients of Civil Engg. Materials.

familiar with the use of NDT equipments

26. CU26 Construction Management Uday Chand Kumar 27-03-2017 31-03-2017 1 After attending the programme, the participants will be able to

explain the processes involve in construction management.

carry out planning & scheduling techniques. maintain communication within the hierarchy.

27. CU27 Fundamentals of ComputerSystem and BasicComputer Use

Rajeev Chatterjee 04-04-2016 15-04-2016 2 After completing the course the participant will be able to

demonstrate the various parts & components of computer system

explain the concept of network & internet

demonstrate the use of office tools in regular office & academicactivities

use e-mail & other services from internet

use cloud services such as drop box, google drive etc.

28. CU28 Software Design using

Unified Modeling Language

Samir Roy 02-05-2016 06-05-2016 1 After completing the course the participant will be able to

use Unified Modeling Language to

Design a software

Develop a software

Model a software

29. CU29 Image Processing usingMATLAB

Indrajit Saha 09-05-2016 13-05-2016 1 After attending the program, the participants will be able to

describe the fundamentals of image processing (IP)

apply MATLAB commands to do IP

explain image processing in classroom


22/96



Sl.No

ProgCode


Co-ordinator (s)

Date

Week


30. CU30 Uses of Some ScientificVisualization Tools

Kinsuk Giri 09-05-2016 13-05-2016 1 After attending the program, the participants will be able to

get idea on basic shell commands on Linux

get the features of gnuplot

visualize multidimensional datas in gnuplot

handle Xmgrace and other softwares

31. CU31 Network Principles,Management &Administration

Rajeev Chatterjee 09-05-2016 20-05-2016 2 After going through this programme the participants will be able to explain the various topologies and media of computer Network

define a network; explain the various protocols in TCP/IP suite

explain the concept of switching and routing

demonstrate the basic techniques of network management

explain the concept of basic network security

32. CU32 Database Design and

Practice

Ranjan Dasgupta 23-05-2016 27-05-2016 1 After attending the course the participants will be able to

get exposure in database design theory design and develop small database application

33. CU33 IP Networking Rajeev Chatterjee 06-06-2016 17-06-2016 2 After going through this programme the participants will be able to

explain the concept of networking and internetworking

explain the working of Internet

explain the role of RIR and other regulatory bodies

explain the various protocols in Routing, Switching design campus wide network

configure switches and routers, explain the concept and working

principles of firewall

explain the various technologies related to Wi. Fi. networks

explain the working of Mobile IP networks

Explain the concept of identity management & access management

34. CU34 Topics of DiscreteMathematics

Samir Roy 13-06-2016 17-06-2016 1 After completing the course the participant will be able to

Apply knowledge of Discrete Mathematics in real life problems

Solve problems in Discrete Mathematics

Explain Discrete Mathematics in classroom

35. CU35 Numerical and

Computational Techniques

for Engineers andResearchers


get an overview on different computational algorithms and Numerical

Simulations get overview on Monte Carlo methods

write hydro code on basic problems

apply hydro code for their specific problems

visualize the data


23/96



Sl.No

ProgCode


Co-ordinator (s)

Date

Week


36. CU36 Theory of Internet & WebPage Design


get acquainted with Internet System

get exposure in TCP/IP protocols

design & develop web-page(s)

37. CU37 Recent Advances inOptimization: Theory and

Applications


learn on Linear and nonlinear optimization, Combinatorial optimization,

Stochastic optimization, Fuzzy Optimization, Optimal control, Multi-objective

optimization, Evolutionary computing

apply optimization techniques in different fields like - Information andcommunication networks, Financial modeling, Supply chain and

Inventory Control, Transportation and Logistics, Industrial engineeringetc.

38. CU38 Data Structures andAlgorithms

Samir Roy 04-07-2016 15-07-2016 2 After completing the course the participant will be able to identify appropriate data structure and algorithms in computation

analyze an algorithm

design appropriate data structure and algorithms in computation

39. CU39 Design of BusinessApplications using SoftwareEngineering Approach

Ranjan Dasgupta 18-07-2016 29-07-2016 2 After attending the course the participants will be able to get exposure in various issues related to software engineering

get exposure in business application development process

design small business application

40. CU40 Introduction to OperatingSystem


get exposure how computers work

demonstrate how system designs

explain operating system in classroom

41. CU41 Compiler Design Samir Roy 19-09-2016 23-09-2016 1 After completing the course the participant will be able to

design compilers

implement compilers

explain compilers in classroom

42. CU42 Multimedia in Education

Technology


describe the multimedia components

get exposure in various multimedia related software

prepare a small computer based training material

43. CU43 Mathematical Logic Samir Roy 05-12-2016 09-12-2016 1 After completing the course the participant will be able to

explain Mathematical Logic in classroom

solve problems related to Mathematical Logic

apply Mathematical Logic in real life problems


24/96



Sl.No

ProgCode


Co-ordinator (s)

Date

Week


44. CU44 Design & Development ofe-learning System

Rajeev Chatterjee 12-12-2016 23-12-2016 2 After going through this programme the participants will be able to

explain the concept of e-learning

design the basic requirement of ICT infrastructure for e-learning

explain synchronous and asynchronous e-learning models

explain the various standards available for e-learning

explain the basis terminologies such as Learning Objects, sharableContent Objects, SCORM

explain and demonstrate ADDIE Model of ISD

demonstrate the various concept of e-content, LMS, interactive

Multimedia Presentation develop e-content chunks/learning object in their own subject domain.

implement the curriculum for effective instructional design

design and develop e-content using various standards, tools andtechnique

exhibit and demonstrate the process of e-content creation.

45. CU45 Mathematical andTechnical Writing usingLaTeX

Kinsuk GiriIndrajit Saha

26-12-2016 30-12-2016 1 After attending the program, the participants will be able to describe the fundamentals of LaTeX

use LaTeX commands

prepare the scientific and non-scientific documents46. CU46 Design of Payroll Systems

using Oracle


get exposure in various process of Payroll Systems get exposure in designing the processes using Software Engineering

approach

design & develop the system

47. CU47 Computational Intelligencefor Knowledge Extraction

Indrajit SahaSamir Roy

16-01-2017 27-01-2017 2 After attending the program, the participants will be able to get exposure in Computational Intelligence (CI)

apply CI for knowledge extraction

design an expert system

48. CU48 Advance Programming in C(Workshop of Co-ordinators)

(Lecture Session over ICT)(Hands on Practice atNITTTR, Kolkata)

Rajeev Chatterjee 30-01-201720-02-201727-02-2017

31-01-201721-02-201701-03-2017

1 After going through this programme the participants will be able to

explain the concept of arrays to the student

write programme related to various manipulation in the array

explain the concept of pointer explain the concept of structures

explain the concept of linked list

write programme related to pointer, structures, & linked list.


25/96



Sl.No

ProgCode


Co-ordinator (s)

Date

Week


49. CU49 Fuzzy and Rough SetTheory

Samir RoyIndrajit Saha

06-02-2017 10-02-2017 1 After completing the course the participant will be able to

design Fuzzy and Rough systems for real life problem solving

implement Fuzzy and Rough systems for real life problem solving

explain Fuzzy and Rough systems in the classroom

50. CU50 Introduction to Python

Programming

Rajeev Chatterjee 13-02-2017 17-02-2017 1 After going through this programme the participants will be able to

write simple program using Python language use loop & control structure

edit different commercial software packages of finite element method

as per user requirement

design & solve complex problem

51. CU51 Introduction to ArtificialNeural Networks

Samir RoyIndrajit Saha

27-02-2017 03-03-2017 1 After completing the course the participant will be able to identify problem domains to apply artificial neural networks

apply artificial neural networks to solve real-life problems

explain artificial neural networks in classroom

52. CU52 Introduction to DBMS Ranjan Dasgupta 06-03-2017 17-03-2017 2 After attending the course the participants will be able to

get acquainted with Database Management System

get exposure in database design theory design and develop database application

53. CU53 Laboratory Experiment andStudents Project

Sagarika Pal 25-04-2016 29-04-2016 1 After attending the course the participants will be able to select the laboratory experiments and projects as per curriculum

perform experiments and record the data properly

prepare laboratory manual for different experiments

write project report in proper format

evaluate the laboratory and project performance of students

54. CU54 Power electronics &Thyristor based Control

System

Soumitra KumarMandal

23-05-2016 27-05-2016 1 After attending the programme, the participants will be able to

study performance characteristics of Power Diode, MOSFET, SCR IGBT,

DIAC and TRIAC

describe Single Phase and Three Phase Uncontrolled and ControlledConverters

understand Commutation of SCRs, Inverter, Chopper and Cyclo-converter

study AC and DC Drives, UPS, Power factor Improvement

55. CU55 Control Systems - Analysis

& Design using MATLAB

Prasanta Sarkar 06-06-2016 17-06-2016 2 After attending the programme, the participants will be able to

model Physical Systems

analyze in Time & frequency domain features

determine InputOutput Stability

design Controller

apply MATLAB Control System Toolbox in simulation


26/96



Sl.No

ProgCode


Co-ordinator (s)

Date

Week


56. CU56 Exposure on MATLAB Anuradha De 13-06-2016 24-06-2016 2 After attending the programme,the participants will be able to

explain the different aspects of MATLAB & Simulink

apply MATLAB for mathematical calculations, graphics and Numericalanalysis by developing different types of matlab files

develop experimental or mathematical models using different Simulink

Toolboxes develop simple GUI files & publish documents

57. CU57 Medical Instrumentation SubrataChattopadhyay


understand Cells, Digestive System, Excretory System, Endocrinology

describe Origins of electro-physiological signal and their characteristics

design practical clinical sensors and transducers

understand the operation of X-ray, Fluoroscopy and Radiography,Pacemaker, Magnetic Resonance Imaging etc.

explain Electric shock hazards and safety devices

58. CU58 8085 & 8086,Microprocessor,Architecture, Programming& Interfacing



describe Architecture and working principles of 8085 and 8086 Micro-processors.

describe Addressing modes & instruction sets of Micro-processors.

write Assembly Language programmes. design Interfacing circuits.

59. CU59 Electromagnetic Wave Anuradha De 11-07-2016 15-07-2016 1 After attending the programme, the participants will be able to

describe the fundamentals of Electromagnetic (E.M.) theory, the basicformalism by Maxwell & related history

identify the sources of production of various E.M. waves, different E.M.

bands properties

list the applications of E.M. theory in the various fields of Physics and

Engineering describe the integral approach to communication theory where

communication is made with Radio / Microwaves antenna or through

fiber optic wave guides.

60. CU60 PLC Programming and

Applications

Sagarika Pal 11-07-2016 22-07-2016 2 After completing the course the participant will be able to

explain working principle of PLC

describe architecture of PLC system develop PLC programmes apply PLC in various control systems


27/96



Sl.No

ProgCode


Co-ordinator (s)

Date

Week


61. CU61 Power Generation fromEnergy Resources

Sheela Yadav Rai 25-07-2016 29-07-2016 1 After attending the programme the participants will be able to

understand potential sources of conventional energies for power

generation

describe potential sources of non-conventional energies for powergeneration

understand environmental aspects of power generation appreciate about various power projects

62. CU62 Simulation and Analysis ofNonlinear and Adaptive

Control Systems

Urmila Kar 25-07-2016 29-07-2016 1 After attending the programme the participants will be able to

explain with example linear and nonlinear control systems

explain the need for nonlinear control

analyze nonlinear control systems using various techniques

simulate nonlinear control systems using MATLAB /Simulink

design laboratory experiments using MATLAB/Simulink

Explain need for Adaptive Control

Describe various adaptive control schemes with suitable diagram.

Illustrate adaptive control scheme with suitable example

63. CU63 Electrical Safety & Code ofPractices


understand Safe Working Regulations of Electrical Installations

familiarize with Preventive Maintenance of Sub-stations and GeneratingStations switchgears

familiarize with Preventive Maintenance of Overhead Equipment andTransmission Lines

use code of practice for Earthing Installation, electrical wiring etc.

understand Extracts from Indian Electricity Rules 1956 & Electricity Act

2003

64. CU64 Applied Physics

experiments with / withoutcomputer interfacing kitfor young Engineers and

Scientists

Anuradha De 25-07-2016 05-08-2016 2 After attending the programme, the participants will be able to

perform some Applied Physics experiment and develop instructionalmanual

use EXPeyes, an interfacing kit for Computer based experiments

write simple programme using Python software and performexperiments

perform some experiments of Basic Physics / Electronics with computer

interfacing kit set a new experiment using the interfacing kit


28/96



Sl.No

ProgCode


Co-ordinator (s)

Date

Week


65. CU65 CAD for Digital Electronics Soumitra KumarMandal

08-08-2016 12-08-2016 1 After attending the programme, participants are expected to use CAD to

explain basic principles of Digital Circuits, Programmable Logic Array,

simple PLDs (SPLD), Complex Programmable Logic Devices

design complex digital circuits using PLDs, PLAs, PALs, CPLDs and

uPGAs apply VHDL & Verilog Software to design Digital Circuits

66. CU66 Optical Fibre & Laser:Principles & Applications


identify the characteristics of optical fibre, types, advantages,

disadvantages

explain the basic principle of Laser, Properties, Types, characteristicsand related hazards

list the various applications of laser with / without optical fibre

state the technologies used in optical communication with optical fibre

record several characteristics & applications of optical fibre & laser byperforming various experiments & through field visit.

67. CU67 Application of MATLABControl System, ImageProcessing and Fuzzy Logic

Tool Box

Sagarika PalUrmila Kar


use MATLAB commands

apply Control System Tool Box Commands

illustrate Simulink Modeling techniques

apply Image processing Tool Box Commands

apply Fuzzy Logic Tool Box Commands

68. CU68 Modelling and Simulation ofMechatronic System


develop mathematical model of electrical system, Electo-mechanical

system, active and passive electrical network etc.

develop mathematical model of Mechanical System, Fluid, Thermal andHydraulic Systems

analysis, Design and integration of dynamic systems.

69. CU69 Simulation & Analysis ofElectrical Circuits


explain concepts of electrical circuits and networks

explain the need for circuit analysis

illustrate the techniques of circuit analysis

identify the mathematical tools for circuits & network analysis

develop models for circuit analysis using Pspice & MATLAB design experiments for effective illustration of Pspice as teaching tool


29/96



Sl.No

ProgCode


Co-ordinator (s)

Date

Week


70. CU70 Semiconductor Devices &Solar PV Module


list different types of materials

explain the different properties of semiconductor like, electric & optical

list different types of semiconductor devices

describe the working principles of various semiconductor devices and

their applications describe the principles of Solar module and identify its various

parameters

71. CU71 Laboratory & WorkshopManual for Electrical,Electronics andInstrumentation

Engineering

Soumitra KumarMandalSagarika Pal


choose experiments from the detailed curriculum

perform the experiments

record and analyze the experimental data

write the instruction manual for students

evaluate the laboratory performance of students

72. CU72 Teaching Control (Linear &Nonlinear) Systems


analyze content of Control systems course

identify learning outcomes of the course

develop taxonomy table for selected modules

select appropriate teaching strategies

select appropriate teaching techniques and aids

prepare lesson plan

practice delivery of instruction as per plan in simulated classroom

environment

73. CU73 Industrial Automation using

PLC, DCS & SCADA


explain Conventional control techniques for industrial automation

describe complex controls such as ratio, cascade, feed forward etc.

develop programme on PLC and DCS for process automation

explain SCADA systems for various process control systems

74. CU74 Laser & Image Processing Anuradha De 24-10-2016 28-10-2016 1 After attending the programme, the participants will be able to

acquaint with the basic principle of Laser, properties, characteristics,

various types of Laser, various applications & hazards

get knowledge on Laser Experiments & be familiar with the experiment

on image processing using laser get knowledge about capturing of image and transferring the same to

the computer

process / analyze the image with image processing software


30/96



Sl.No

ProgCode


Co-ordinator (s)

Date

Week


75. CU75 Electrical Machines andDrives



perform maintenance of transformers, DC motors, Induction Motors,

synchronous generators and electrical appliances

learn different drives for AC & DC Machine

76. CU76 Applied Physics

experiments with / withoutcomputer interfacing kitfor young Engineers andScientists


perform some Applied Physics experiment and develop instructionalmanual

use EXPeyes, an interfacing kit for Computer based experiments

write simple programme using Python software and perform

experiments

perform some experiments of Basic Physics / Electronics with computer

interfacing kit set a new experiment using the interfacing kit

77. CU77 Renewable Energy Sourcesand Emerging Technologies

Sheela Yadav Rai 05-12-2016 09-12-2016 1 After attending the programme the participants will be able to:

understand Energy Sources and their utilization

explain Environmental aspects of electric energies generation

understand the scope of Solar Thermal Conversion and Solar

Photovoltaic system

describe about wind energy, Geothermal energy and Biomass

apply Non-conventional energies through various agencies viz.

WBREDA

78. CU78 Modern Control & MATLABSimulation


understand State Variable Technique

apply State Variable Technique in Controller Design

apply MATLAB Control System Toolbox for simulation.

79. CU79 Application of MATLAB inElectrical Engineering


solve simple problems using MATLAB programming

construct simple models using Simulink

analyze electrical engineering problems using MATLAB/ Simulink

simulate electrical systems using MATLAB/Simulink

explain the use of MATLAB/ Simulink in teaching Electrical Engineering

80. CU80 Exposure on MATLAB Anuradha De 26-12-2016 06-01-2017 2 After attending the programme, the participants will be able to

explain the different aspects of MATLAB & Simulink apply MATLAB for mathematical calculations, graphics and numerical

analysis by developing different types of matlab files

develop experimental or mathematical models Simulink Toolboxes

develop simple GUI files& publish document


31/96



Sl.No

ProgCode


Co-ordinator (s)

Date

Week


81. CU81 LABVIEW & MATLABApplications in Engineering


Sagarika Pal


understand fundamentals of LABVIEW

implement LABVIEW applications in Engineering

illustrate applications of MATLAB in Engineerin

82. CU82 Electrical Power System &

Protection

Soumitra Kumar

Mandal


explain construction, operating principle, and applications of differentelectrical machines

describe Per unit System and Fundamentals of Power Flow

describe Power System Stability

find Numerical Solution of Transient Stability

explain Power System Operation and Control

describe Power System Protection

83. CU83 Power ElectronicsApplications

Sheela Yadav Rai 16-01-2017 20-01-2017 1 After attending the programme the participants will be able to understand various components of Power Electronics

explain Power device & converter

know voltage source Inverter

know current source Inverter

84. CU84 Advanced Control Systems

& MATLAB Simulation


understand the Recent Trends in Automation & Control

use Modern Control Technique in controller design

use Robust Control Technique in controller design

implement Intelligent Control Techniques

85. CU85 Power System Analysis Sheela Yadav Rai 06-02-2017 10-02-2017 1 After attending the programme the participants will be able to

describe the structure of Power System

understand the parameters of transmission line

represent power system components

know symmetrical & unsymmetrical faults

86. CU86 Sensors, Transducers &

Signal Conditioning


define & classify sensors and transducers

measure different process parameters

design & implement signal conditioning circuit for different sensors

87. CU87 Power Generation from

Energy Resources

Sheela Yadav Rai 20-02-2017 24-02-2017 1 After attending the programme the participants will be able to

understand potential sources of conventional energies for powergeneration

describe potential sources of non-conventional energies for powergeneration

understand environmental aspects of power generation

appreciate about various power projects


32/96



Sl.No

ProgCode


Co-ordinator (s)

Date

Week


88. CU88 Digital Control usingMATLAB


understand sampled data control system

design digital control system using both classical & modern controltechniques.

familiarize with MATLAB Control System Tool Box.

apply MATLAB for Control System Tool Box in Controller design &simulation

89. CU89 Basics of ThermalEngineering (Thermal

EngineeringI)

Rayapati Subbarao 04-04-2016 08-04-2016 1 At the end of the programme, the participants will be to:

paraphrase the basics of thermodynamics.

apply laws of thermodynamics in various problems.

appreciate more about entropy and the processes of perfect gases.

identify and analyze thermodynamic air cycles.

90. CU90 Arc Welding Process Arpan KumarMondalDipankar Bose


analyze the principles of arc welding processes

classify different arc welding processes and their applications

perform independently various arc welding processes

91. CU91 Mechanical Measurementsand Control

Samiran Mandal 18-04-2016 22-04-2016 1 After attending the programme, the participants will be able to

explain the principles of measurement of physical quantities

explain the basic principles of control system.92. CU92 Applications of Thermal

Engineering(Thermal EngineeringII)


interpret the working principle and features of steam engines, turbinesand condensers.

explain the basics of I.C. Engines and analyze the performance.

identify the functions of gas turbines.

assess various processes in a steam power plant.

93. CU93 Non-conventional

Machining Process

Dipankar Bose

Arpan KumarMondal


explain the utility of non-conventional machining processes

state working principles of different non-conventional machining

processes

practice on non-conventional machining process

94. CU94 Programming and

Operations on CNCMachines

Nirmal Kumar

Mandal

23-05-2016 27-05-2016 1 After attending the programme the participants will be able to

explain CNC Technology. develop programs in CNC machines

operate CNC machines


33/96



Sl.No

ProgCode


Co-ordinator (s)

Date

Week


95. CU95 How to write Thesis orResearch Paper


describe the steps involved in writing a thesis.

identify the scope of a thesis.

construe the results in a better way.

derive conclusions from the plots and contours made.

discover the ways of writing a research paper.96. CU96 AUTOCAD Nirmal Kumar

Mandal06-06-2016 17-06-2016 2 After attending the programme the participants will be able to

draw parts in 2D and 3D.

interpret sectional view of an engineering part.

97. CU97 Computer Numerical

Controlled Machines:Constructional Features

and Programming

Nirmal Kumar

MandalSamiran Mandal


specify Turning centre and Machining Centre.

develop programs on CNC Vertical machining Centre.

operate machining Centre.

98. CU98 Turning, Milling & Drilling Dipankar BoseSamiran Mandal

18-07-2016 29-07-2016 2 After attending the programme the participants will be able to state principles of turning , milling , drilling operations

perform turning ,milling operations in the workshop independently

99. CU99 Introduction to Robotics Samiran Mandal 01-08-2016 05-08-2016 1 After attending the programme, the participants will be able to

describe the construction of industrial robots

explain the applications of industrial robots assess the economic justification of robot

100. CU100 Advanced Manufacturing

System

Nirmal Kumar

Mandal


describe different types of automation in manufacturing.

measure performance of an Automated Manufacturing System

101. CU101 CFD in Turbomachinery Rayapati Subbarao 22-08-2016 26-08-2016 1 At the end of the programme, the participants will be to:

identify the basics of CFD.

apply fundamentals of CFD to various systems.

understand the basics of turbomachinery.

relate CFD to turbomachinery.

102. CU102 Collection and Analys of

Experimental Data inLaboratory and Workshop

Nirmal Kumar

Mandal


explain Design of Experiment

develop Response surface

explain Analysis of Variance

103. CU103 Numerical Methods forFluid Dynamics


get an overview of the trends in Numerical methods

use of finite element methods get an overview of basic fluid dynamics

apply numerical methods to solve fluid dynamical equations

STTP SCHEDULE 2016 2017


34/96



Sl.No

ProgCode


Co-ordinator (s)

Date

Week


104. CU104 Design and Modeling ofvarious thermal systems


distinguish the working principles of various thermal systems.

discuss the basics of power plants, gas turbines and internalcombustion engines.

experience various design and modeling procedures.

model power plants or energy production devices. prepare and model a thermal system of their choice.

105. CU105 Computer Aided Design Nirmal Kumar

Mandal


model a three dimensional part.

explain different steps of a design process

design an engineering part with commercial software

106. CU106 TIG & MIG WeldingProcess

Dipankar BoseArpan KumarMondal


explain principles of TIG Welding

explain principles of MIG welding

do hands on practice on TIG and MIG welding

107. CU107 Mechanical Engineering

Materials and Applications

Arpan Kumar

Mondal


know various materials and their properties state the application of engineering materials

perform the characterization of different engineering materials

108. CU108 Developments in Power

Plants and Alternative Fuels


understand the need and importance of alternative fuels in powersection.

recognize the necessity of newer fuels in transportation.

analyze alternative sources of energy.

explore the possibilities in making modifications to power plant

scenario.

investigate about various alternative fuels available.

109. CU109 EngineeringThermodynamics and its

Applications


paraphrase the basics of thermodynamics.

apply laws of thermodynamics in various problems.

interpret the working principle and features of steam engines, turbines

and condensers.

explain the basics of I.C. Engines and analyze the performance of gasturbines.

review the processes of a steam power plant.

STTP SCHEDULE 2016 2017


35/96



Sl.No

ProgCode


Co-ordinator (s)

Date

Week


110. CU110 CAD/CAM Nirmal KumarMandal


define automation.

classify automation.

operate automated system.

111. CU111 Development of Mechanical

Engineering LaboratoryExperiments & InstructionSheets

Samiran Mandal 28-11-2016 02-12-2016 1 After attending the programme, the participants will be able to

classify the skills developed in laboratory classify the laboratory experiments

develop laboratory experiments

prepare laboratory instruction sheets

evaluate laboratory skills

112. CU112 Theory and Practices ofVarious Welding Processes

Arpan KumarMondalDipankar Bose


classify various welding processes and their applications

understand the principles of various welding processes perform independ

nitttr kolkata

Documents