nilo tm 2ire automatic sitchesdocdif.fr.grpleg.com/general/legrand-exp/np-ft-gt/f01244...nilo tm...
TRANSCRIPT
87045 LIMOGES CedexTelephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88
Catalogue number(s): 6 651 18 - 6 652 18NiloéTM
2-wire automatic switches
Technical data sheet: F01244EN/01 Updated: 06/07/2012
1/2
1. USE
This range is used to control 40 to 400 W incandescent, 230 V halogen and ELV halogen lamps via ferromagnetic or electronic transformer.The automatic switch is installed in the place of a conventional switch.Screw terminals.It can be used as a two-way switch with pushbutton.
2. RANGE
3. POSITIONING
Colour
WhiteRAL 903
IvoryRAL 113
6 651 18 6 652 18
4. OVERALL DIMENSIONS
5. CONNECTION
Screw terminalsTerminal capacity: 2 x 2.5 mm2
Tightening torque: 0.8 NmStripping length: 13 mmScrewdriver: Posidrive 1, Phillips 1, 4 mm flat screwdriver.
�
�
75.8
63 60
75.8
63
60
Ø 4 30 20
NL
NL
n
NiloéTM
2-wire automatic switches
Catalogue number(s): 6 651 18 - 6 652 18
Technical data sheet: F01244EN/01 Updated: 06/07/2012 Created: 14/12/2010
2/2
6. OPERATION
7. TECHNICAL FEATURES
7.1 Mechanical featuresIP: 21 DIK: 04
7.2 MaterialsPoly gloss appearanceColour: Pure (RAL 903) and Linen (RAL 113)Material: - Plate ABS - Rocker plate: ABS - Halogen-freeSelf-extinguishing: - 850°C/30 s for insulating parts holding live parts in
place - 650°C/30 s for other parts made of insulating
materialsUV resistant
7.3 Electrical featuresVoltage: 250 VACCurrent: 16 A
(*) Only use transformers designed to operate with electronic switches. Incandescent bulb Halogen lamp ELV halogen lamp with electronic transformer ELV halogen lamp with ferromagnetic transformer
Important: Take the transformer losses into account when calculating the power. The transformers must be loaded at more than 60% of their power.
5 m
5 m
1.2 m
10 m
1.5 m4 m
10 m
1.2 m
10 m3 m
10 m3 m
1.5 m
1.3 m
0.5 m
3 m
1.5 m
3 m
Horizontal detection
Vertical detection
35°
0°
100 - 240 V50/60 Hz
2 x 2.5 mm2
240 VMax. 400 W 400 W 400 VA 400 VA
Min. 40 W 40 W 40 VA 40 VA
100 VMax. 200 W 200 W 200 VA 200 VA
Min. 40 W 40 W 40 VA 40 VA
(*)
Caution: Mixing type and type loads is prohibited
�
�
7. TECHNICAL FEATURES (continued)
7.4 Climatic featuresStorage and usage temperature: - 5°C to + 35°C
7.5 Features of the supportMaterial: Grey (RAL 737) halogen-free polycarbonate.High impact resistance and torsional strength due to the thickness of the support.
Easy guidance for positioning the mechanisms.Horizontal or vertical alignment without lifting up the mechanisms too much.
8. MAINTENANCE
Easy-clean (due to poly gloss surface).
9. ACCESSORY
6 650 99"Rapido" clawFor fixing devices in refurbishment projects