night vision
TRANSCRIPT
Image>Mode>Duotone
The Duotone Option Box will appear
You need to pick two different greens.
First green is 25BF21 And the second is
A8D9A7 After that go to
Image>Mode>RGB color
Copy your background layer
Select your new layer Image>Adjustments
>Levels In the Input Level
dialog box enter (from left to right): 70, 1.00, and 230.
Choose your blur tool Set a low opacity
20% And run it across the
bottom of the photo
Filter>Noise>Add Noise
Enter Amount: 3%, Distribution: Uniforn, and make sure Monochromatic is selected.
Choose the Burn Tool, set it at Midrange, Exposure 50%,
Carefully apply your brush in a circular motion to the outside of the image.
This gives a nice subtle darkening effect to the edges.
Finally choose Hue/Saturation and perform final tweaks by moving the 3 sliders in very small increments.