Cable Glands Catalogue

Thomas & Betts Nylon Cable Glands are quick & easy to install with a high quality gripping claw/seal arrangement that caters

for a wide range of cable sizes per fitting. Each gland has no loose parts and requires no disassembly for cable installation.

LOCKNUT WASHER BODY CLAW SEALS NUT

ACRO

SS C

ORN

ERS

CABL

EOV

ERAL

LM

AX

MOUN

TING

THRE

AD

THREADLENGTH

NG Cable GlandGENERAL PURPOSE NYLON CABLE GLANDS

Thomas & Betts, a global leader in the design, manufacture and marketing of electrical products and accessories is proud to be the manufacturer of the Nicote range of metal cable glands. This

new catalogue not only details the full Nicote range, but presents the entire Thomas & Betts range of cable glands from the general purpose NG Nylon range through to 304 Stainless steel models designed to deliver superior performance in harsh environments.

Thomas & Betts Australasia is proudly committed to delivering innovative solutions to its valued customers through experienced sales and service teams in each state and the National Cus-tomer Support Centre. Should you not find what you are looking for in this catalogue or need

further information please contact us on 1300 666 595.

ApplicationsIndoor and outdoor use

StandardsAS60529-2004

FunctionProvides seal on cable sheath

Protection ClassIP68, Resistant to salt water, weak alcohol, oil, grease and common solvents

ConstructionBody - UL approved Nylon 66 (Black)Seal - EPDM Rubber

Thread TypeMetric with locknut and IP68 washer

Part Mounting Thread Cable Acceptance Details Number Size Length Overall Diameter Across Pack (mm) (mm) Min. Max. Corners Qty. (mm) (mm) (mm)

152227273341506275

50 50 25

25 25 10 10 2 2

NG-12NG-16NG-20NG-20-2.5TPSNG-25NG-32NG-40 NG-50NG-63

151515151515152020

4 6

8.52.5mm TPS

12.518243040

71014N/A1825324151

M12 x 1.5 M16 x 1.5M20 x 1.5M20 x 1.5M25 x 1.5M32 x 1.5M40 x 1.5M50 x 1.5M63 x 1.5

Product specifications may change at any time without notice.

1

The Nicote range of metal cable glands are your guarantee of safety in hazardous locations especially where fire and explosion are an identified risk.

The current Nicote range is quite simply the best available because they do not compromise on safety and thats what counts!

Take a look at just some of the features that make Nicote the first choice:

Highly durable nickel platingNicote glands are coated in a proprietary 2 coat plating process that ensures all metalcomponents will not degrade and potentially let you down over time.

Comprehensive RangeThe greater the range of cable sizes a gland is designed to cover, the higher the risk of sealsfailing. Nicote contains a comprehensive range with smaller cable acceptance incrementsthat also allows the gland bodies to be smaller and hence easier to use when space is tight.

Full ApprovalsDont just take our word for it, independent test bodies have confirmed that the Nicote gland range complies with relevant IEC and Australian standards including approvals for hazardous areas.

Neoprene SealsAll Nicote glands use high quality Neoprene seals that retain their tension and are resistant to oil, chemicals and flame making them the best choice for hazardous applications.

IP66/68 ProtectionAll Nicote glands classified for indoor/outdoor use are supplied with IP66/68 gaskets forinstallation on the mounting thread and neoprene seals on the cable sheath. This levelof protection means that the glands are protected from the ingress of dust and water.Anything less is unacceptable and compromises safety.

ORing SealsAll Nicote glands designed for SWA cable and classified for indoor/outdoor use, feature oring seals between the body and sleeve to ensure that water cannot progress along the threadand compromise the seal. Just another safety feature.

Easy to useThe ability to easily produce a tight seal and correct earth everytime is of primary importance.All Nicote glands are designed to be easy to use and to ensure that the installer can see thatthe correct fitting instructions have been followed. For example, all SWA flameproof glandsfeature a loose clamping cone so that the installer can see that the armour is fully secured.

When safety matters, there is only one choice.

Introduction

2

MOUN

TING

THRE

AD

ACRO

SS C

ORN

ERS

CABL

E OV

ERAL

L

MAX

BODY

IP66/68 GASKET NEOPRENE SEAL

SKID WASHER

NUT

PROTRUSIONTHREADLENGTH

UN12AUN16AUN20AUN20BUN25AUN32AUN40A UN40BUN50A UN50B UN63AUN63B

101010101010161616161919

1.0 1.0 6.010.615.020.025.030.035.040.045.050.0

6.06.010.615.020.025.030.035.040.045.050.055.0

18.320.627.530.933.040.751.155.060.967.078.088.0

131314161718212323242532

1/2 x 26 TPI M16 x 1.5M20 x 1.5M20 x 1.5M25 x 1.5M32 x 1.5M40 x 1.5M40 x 1.5M50 x 1.5M50 x 1.5M63 x 1.5M63 x 1.5

Fitting Instructions1. To comply with IP66/68 approvals, the fibre gasket must be installed on the mounting thread.2. Screw the gland body into the apparatus, or use a locknut to secure body.3. Pass the cable through the gland to the required position and tighten gland nut so that the seal grips firmly onto the cable.

Part Mounting Thread Cable Acceptance Details Cable Gland Number Size Length Overall Diameter Across (mm) (mm) Min. Max Corners Protrusion (mm) (mm) (mm) (mm)

UN Cable GlandGENERAL PURPOSE CABLE GLAND FOR CIRCULAR CABLE

Product specifications may change at any time without notice.

3

ApplicationsIndoor and Outdoor use

StandardsAS60529-2004

FunctionProvides Seal on Cable Sheath

Protection ClassIngress of waterIP66/68 (30m)

ConstructionNickel Plated Brass Components

ApplicationsIndoor and Outdoor use in hazardous areas

StandardsAS60529-2004

FunctionProvides Flameproof Seal on Cable Sheath

Protection ClassIngress of waterIP66/68 (40m)

ConstructionNickel Plated Brass Components

Fitting Instructions1. To comply with IP66/68 approvals, the fibre gasket must be installed on the mounting thread.2. Screw the gland body into the apparatus.3. Pass the cable through the gland to the required position and tighten gland nut so that the seal grips firmly onto the cable.

PROTRUSION

ACRO

SS C

ORN

ERS

MOUN

TING

THRE

ADBODY

CABL

E OV

ERAL

LM

AX

IP66/68 GASKET NEOPRENE SEAL SKID WASHER

NUT

THREADLENGTH

UFPN20AUFPN20BUFPN20CUFPN25AUFPN32AUFPN32BUFPN40AUFPN40BUFPN50AUFPN50BUFPN63AUFPN63BUFPN250AUFPN275AUFPN300AUFPN350AUFPN350BUFPN400AUFPN400B

M20 x 1.5 M20 x 1.5M20 x 1.5M25 x 1.5M32 x 1.5M32 x 1.5M40 x 1.5M40 x 1.5M50 x 1.5M50 x 1.5M63 x 1.5M63 x 1.52.5BSP2.75BSP3.0BSP3.5BSP3.5BSP4.0BSP4.0BSP

6.29.112.014.518.221.925.630.034.239.144.048.755.562.469.376.183.089.996.6

9.112.014.518.221.925.630.034.239.144.048.755.562.469.376.183.089.996.6103.0

28283136424652557274888898107115129129143143

21182023232525253133343435363648484848

303020161288622222111111

12.712.712.715202021212828282828353538383838

Product specifications may change at any time without notice.

Part Mounting Thread Cable Acceptance Details Cable Gland Inner Number Size Length Overall Diameter Across Carton (mm) (mm) Min. Max. Corners Protrusion Pack (mm) (mm) (mm) (mm) Qty.

UFPN Cable GlandFLAMEPROOF CABLE GLAND FOR CIRCULAR CABLE

4

ApplicationsIndoor use

FunctionProvides Armour Clamp

ConstructionNickel Plated Brass Components

Fitting Instructions1. Screw the gland body into the apparatus.2. Pass the gland sleeve over the cable before commencing to strip the outer sheath of the cable.3. Measure the length of tails required and add about 75mm to the outer sheath and armour to this point.4. Strip the outer sheath.5. Cut the armour wire to the SWA exposed length in the table.6. Pass the armour clamp over the armour.7. Pass the armour cone over the bedding and under the armour wires.8. Pass the bedding through the gland body.9. Engage sleeve thread onto body thread and tighten securely.

GN164GN204GN206GN254GN256GN324GN326GN405GN503GN505GN636GN753GN755

M16 x 1.5 M20 x 1.5M20 x 1.5M25 x 1.5M25 x 1.5M32 x 1.5M32 x 1.5M40 x 1.5M50 x 1.5M50 x 1.5M63 x 1.52.5BSP2.5BSP

10.0010.0010.0010.0010.0010.0010.0015.0015.0015.0019.0019.0019.00

7.2011.0013.7516.2518.7522.7526.5032.7538.5044.4556.2560.3566.70

10.8017.0020.0022.5026.0030.0034.0041.5049.0055.5068.2573.0079.40

0.90 - 1.250.90 - 1.250.90 - 1.250.90 - 1.251.25 - 1.601.25 - 1.601.60 - 2.001.60 - 2.002.00 - 2.502.00 - 2.502.50 - 3.152.50 - 3.152.50 - 3.15

20.525.227.530.333.639.544.554.260.366.782.695.3101.6

21.526.326.326.335.738.738.744.651.354.556.060.060.0

7.4010.4016.6019.6022.1025.6029.6033.6041.1048.6055.1067.8572.60

8.08.08.08.010.512.012.014.015.515.517.521.521.5

30202016864644211

PROTRUSION

CABL

E OV

ERAL

LM

AX

ACRO

SS C

ORN

ERS

MOUN

TING

THRE

AD

CABL

EO/B

EDDI

NG

MAX

BODYSWA

EXPOSED CLAMP SLEEVE

THREADLENGTH

Product specifications may change at any time without notice.

Part Mounting Thread Cable Acceptance Details Cable Gland Inner Number Size Length O/bedding Overall Diameter SWA Across SWA Carton (mm) (mm) Max. Min. Max. Dia. Corners Protrusion Exposed Pack (mm) (mm) (mm) (mm) (mm) (mm) (mm) Qty.

GN Cable GlandGENERAL PURPOSE CABLE GLAND FOR STEEL WIRED ARMOURED CABLE

5

ApplicationsIndoor and outdoor use

FunctionProvides armour clamp, and sealon outer sheath

Protection ClassIngress of waterIP66/68

ConstructionNickel Plated Brass Components

Part Mounting Thread Cable Acceptance Details Cable Gland Inner Number Size Length O/bedding Overall Diameter SWA Across SWA Carton (mm) (mm) Max. Min. Max. Dia. Corner Protrusion Exposed Pack (mm) (mm) (mm) (mm) (mm) (mm) (mm) Qty.

MOUN

TING

THRE

AD

CABL

EO/B

EDDI

NG

MAX

CABL

E OV

ERAL

LM

AX

PROTRUSION

BODY

IP66/68 GASKETO RINGSEAL CLAMP

SWAEXPOSED

SLEEVE

NEOPRENE SEAL

NUT

ACRO

SS C

ORN

ERS

THREADLENGTH

WGN162WGN164WGN202WGN203WGN204WGN206WGN254WGN256WGN324WGN326WGN403WGN404WGN405WGN502WGN503WGN504WGN505WGN634WGN635WGN636WGN753WGN754WGN755WGN10AWGN10B

M16 x 1.5M16 x 1.5M20 x 1.5M20 x 1.5M20 x 1.5M20 x 1.5M25 x 1.5M25 x 1.5M32 x 1.5M32 x 1.5M40 x 1.5M40 x 1.5M40 x 1.5M50 x 1.5M50 x 1.5M50 x 1.5M50 x 1.5M63 x 1.5M63 x 1.5M63 x 1.52.5BSP2.5BSP2.5BSP3BSP3BSP

14141414141414141414151515151515151919191919191919

6.007.208.009.7511.0013.7516.2518.7522.7526.5028.5030.7532.7535.7538.5041.6544.4548.8052.4056.2560.3563.5066.7070.0076.00

9.6010.8012.0015.5017.0020.0022.5026.0030.0034.0037.0039.5041.5045.0049.0053.5055.5060.3563.5068.2573.0076.2079.4084.0088.50

0.50 - 0.90 0.50 - 0.90 0.50 - 0.90 0.90 - 1.250.90 - 1.250.90 - 1.250.90 - 1.251.25 - 1.601.25 - 1.601.60 - 2.001.60 - 2.001.60 - 2.001.60 - 2.002.00 - 2.502.00 - 2.502.00 - 2.502.00 - 2.502.50 - 3.152.50 - 3.152.50 - 3.152.50 - 3.152.50 - 3.152.50 - 3.15

3.153.15

36 364040404040475555595959737373737979799393939090

8899999111212131313141414141515152222222222

4040303030208688444442211111111

Fitting Instructions1. To comply with IP66/68 approvals, the fibre gasket must be installed on the mounting thread.2. Screw the gland body into the apparatus.3. Pass the gland nut, outer seal and gland sleeve over the cable before commencing to strip the outer sheath of the cable.4. Measure the length of tails required and add about 75 mm to the outer sheath and armour to this point.5. Strip the outer sheath.6. Cut the armour wire to SWA exposed length.7. Pass the armour clamp over the armour.8. Pass the body and armour cone over the bedding and under the armour wires.

WGN10A - B Complete with earth fixing lug of 1/2 diameter.

9. Engage sleeve thread onto body thread and tighten securely.10. Slide outer seal and gland nut into position and engage nut thread onto sleeve thread.11. Tighten gland nut securely.

8.009.2010.4011.6015.1016.6019.6022.1025.6029.6033.6036.6039.1041.1044.6048.6053.1055.1059.9563.1067.8572.6075.8079.0083.60

24.124.125.327.527.533.036.440.749.849.860.960.960.976.076.086.586.5101.9101.9101.9115.6115.6115.6124.0124.0

Product specifications may change at any time without notice.

WGN Cable GlandGENERAL PURPOSE CABLE GLAND FOR STEEL WIRED ARMOURED CABLE

6

INNER NEOPRENESEAL

SWAEXPOSED

BODY

IP66/68 GASKETO RINGSEAL

CLAMP

CONESLEEVE

NUTOUTER NEOPRENE SEAL

PROTRUSION

ACRO

SS C

ORN

ERS

MOUN

TING

THRE

AD

CABL

E OV

ERAL

LM

AX

CABL

EO/B

EDDI

NG

MAX

THREADLENGTH

9. Pass the armour cone over the bedding and under the armour wires.10. Pass the bedding through the inner seal in the gland body. N.B. Unless this seal provides a push fit on the bedding the next size gland will be required. (The minimum dimension over the bedding is embossed on the sleeve of the gland for reference.) On glands over FLWN405 one or two seals are supplied with each gland, select the most suitable seal.11. Engage sleeve thread onto body thread and tighten securely.12. Slide outer seal and gland nut into position and engage nut thread onto sleeve thread.13. Tighten gland nut securely.

ApplicationsIndoor and Outdoor use in hazardous areas

StandardsIEC 60079 - 0:2004 IEC 60079 - 1:2007 IEC 61241 - 0:2004 IEC 61241 - 1:2004

FunctionProvides O/Bledding Flameproof Seal, ArmourClamp and Seal on Outer Sheath

Protection ClassANZEx 11.2001xIECEx SIM 11.0002XEx d I/IICIngress of waterIP66/68 (30m)

ConstructionNickel Plated Brass Components

Fitting Instructions1. To comply with IP66/68 approvals, the fibre gasket must be installed on the mounting thread.2. Screw the gland body into the apparatus.3. Leave the inner seal in the gland body.4. Pass the gland nut, outer seal and gland sleeve over the cable before commencing to strip the outer sheath of the cable.5. Measure the length of tails required and add about 75 mm to the outer sheath and armour to this point.6. Strip the outer sheath.7. Cut the armour wire to SWA exposed length.8. Pass the armour clamp over the armour.

Product specifications may change at any time without notice.

Part Mounting Thread Cable Acceptance Details Cable Gland Inner Number Size Length Overbedding Overall Diameter SWA Across SWA Carton (mm) (mm) Min. Max. Min. Max. Dia. Corners Protrusion Exposed Pack (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) Qty.

FLWN202 M20 x 1.5 15.80 6.00 8.00 11.00 13.00 0.50 - 0.90 25 54 12 30FLWN203 M20 x 1.5 15.80 8.30 9.75 12.50 15.50 0.90 - 1.25 27 54 12 30FLWN204 M20 x 1.5 15.80 9.35 11.00 15.10 17.00 0.90 - 1.25 27 54 12 30FLWN205 M20 x 1.5 15.80 10.60 12.50 16.60 20.00 0.90 - 1.25 33 54 12 20FLWN206 M20 x 1.5 15.80 12.00 13.75 17.00 20.00 0.90 - 1.25 33 54 12 20FLWN253 M25 x 1.5 19.00 13.35 15.00 19.60 22.50 0.90 - 1.25 36 56 12 14FLWN254 M25 x 1.5 19.00 14.60 16.25 19.60 22.50 0.90 - 1.25 36 56 12 14FLWN255 M25 x 1.5 19.00 15.85 17.50 22.10 26.00 1.25 - 1.60 41 56 12 12FLWN256 M25 x 1.5 19.00 17.10 18.75 23.00 26.00 1.25 - 1.60 41 56 12 12FLWN323 M32 x 1.5 25.40 18.35 20.75 25.60 30.00 1.25 - 1.60 50 64 13 8FLWN324 M32 x 1.5 25.40 20.35 22.75 25.60 30.00 1.25 - 1.60 50 64 13 8FLWN325 M32 x 1.5 25.40 22.35 24.75 29.60 34.00 1.60 - 2.00 50 64 13 8FLWN326 M32 x 1.5 25.40 24.35 26.50 30.00 34.00 1.60 - 2.00 50 64 13 8FLWN403 M40 x 1.5 25.40 26.10 28.50 33.60 37.00 1.60 - 2.00 61 72 15 1FLWN404 M40 x 1.5 25.40 28.10 30.75 36.60 39.50 1.60 - 2.00 61 72 15 1FLWN405 M40 x 1.5 25.40 30.35 32.75 37.00 41.50 1.60 - 2.00 61 72 15 1

FLWN Cable GlandFLAMEPROOF CABLE GLAND FOR STEEL WIRE ARMOURED CABLE

7

Part Mounting Thread Cable Acceptance Details Cable Gland Inner Number Size Length O/bedding Overall Diameter SWA Across SWA Carton (mm) (mm) Max. Min. Max. Dia. Corners Protrusion Exposed Pack (mm) (mm) (mm) (mm) (mm) (mm) (mm) Qty.

Fitting Instructions1. To comply with IP66/68 approvals, the fibre gasket must be installed on the mounting thread.2. Pass Nut, Seal and Sleeve over the outer sheath of cable (Where more than 1 seal is supplied, use the seal with the smallest clearance on the cable).3. Measure the length of cores required and strip the outer sheath and armour wires to the length shown in Table 1.4. Remove the Bedding and any fillers to the length shown in Table 2.5. Slide the clamp over the armour wires and work the Cone over the bedding and under the SWA.6. Locate the Body onto the Cores and hold hard against the face of the Cone. Screw the Sleeve onto the Body and tighten, now tighten the nut onto the sleeve.7. Remove the Body from the assembly.8. Prepare the epoxy putty. This is a 2 part pack and must be mixed in a ratio of 1 to 1 until the colour is even throughout, without any streaks. After mixing it remains pliable for at least 1 hour. (see Useable Life for Mixed Epoxy below)

Note: The Red Epoxy component is affected by storage temperature. Please check to ensure this component is as pliable as the yellow component. It is recommended that the epoxy should be mixed and fitted only with the user wearing the disposable gloves supplied with every gland.

9. Spread the conductors and apply to epoxy to the EXPOSED CENTRE of the conductors. Close the conductors and pack putty into the recess of the cone and down onto the top of the bedding material leaving a shoulder of putty to fill the sleeve cup.

ApplicationsIndoor and Outdoor use in hazardous areas

StandardsIEC 60079 - 0:2004 IEC 60079 - 1:2007 IEC 61241 - 0:2004 IEC 61241 - 1:2004

FunctionProvides Barrier Epoxy Seal to Cable Cores,Armour Clamp, and Seal on Outer Sheath

Protection ClassANZEx 11.2001XIECEx SIM 11.0002X Ex d I//IICIngress of waterIP66/68 (30m)

ConstructionNickel Plated Brass Components

FLPW203BFLPW206BFLPW256BFLPW326BFLPW405BFLPW503BFLPW505BFLPW635BFLPW636BFLPW754BFLPW755B

M20 x 1.5M20 x 1.5M25 x 1.5M32 x 1.5M40 x 1.5M50 x 1.5M50 x 1.5M63 x 1.5M63 x 1.5

2.5BSP2.5BSP

15.8015.8019.0025.4025.4028.6028.6028.6028.6028.6028.60

9.7513.7518.7526.5032.7538.5044.4552.4056.2563.5066.70

15.5020.0026.0034.0041.5049.0055.5063.5068.0076.0079.40

0.90 - 1.25 0.90 - 1.251.25 - 1.601.60 - 2.001.60 - 2.002.00 - 2.502.00 - 2.502.50 - 3.152.50 - 3.152.50 - 3.152.50 - 3.15

27334150617687102102116116

545456647288889696100100

12.5015.0019.5025.5033.5041.0048.5055.0063.0067.5075.50

11.511.511.513.515.5171719192323

14141062221111

MOUN

TING

THRE

AD

CABL

EO/B

EDDI

NG

MAX

EPOXY

PROTRUSION

CABL

E OV

ERAL

LM

AXAC

ROSS

CORN

ERS

CLAMPSWA

EXPOSEDSLEEVE

NUTOUTER NEOPRENE SEALCONEBODY SLEEVEO RING

SEAL

IP66/68 GASKETBODY

THREADLENGTH

Continue folding putty round the conductors and working it well in between them, joining with that extruded from the core center avoiding any gaps or voids. Cover the conductors from the face of the cone to the length equal at least to the length of the Sleeve.10. Assemble the Sleeve over the epoxy until it fits into the Cone. Remove any surplus epoxy.11. Reassemble the Body, tighten and allow at least three hours for the epoxy to reach correct hardness.12. Remove the Body, fit to the equipment the reassemble completed fitting.

TABLE 1 TABLE 2Gland mm

FLPW203BFLPW206BFLPW256BFLPW326BFLPW405BFLPW503BFLPW505BFLPW635BFLPW636BFLPW754BFLPW755B

11.5011.5011.5013.5015.5017.0017.0019.0019.0023.0023.00

Gland mmFLPW203BFLPW206BFLPW256BFLPW326BFLPW405BFLPW503BFLPW505BFLPW635BFLPW636BFLPW754BFLPW755B

13.5013.5013.5015.5017.5017.5019.5021.0021.0025.0025.00

Useable Life for Mixed EpoxyThis will depend upon the bulk mass and temperature. 25 grams wt 2 hours @ 25deg. CApproximate figures are: 25 grams wt 3 hours @ 15deg. C

CureThis will depend upon the bulk mass and temperature. 25 grams wt 12 hours @ 25deg. CApproximate figures are: 25 grams wt 24 hours @ 15deg. C

Mechanical properties of cured mixTensile strength BS6319 2 days min. 30MPaCompressive strength BS6319 2 days min. 40MPaHardness min 75 shore DSpecific Gravity @ 20 deg. C 1.84 to 1.99

Product specifications may change at any time without notice.

FLPWB Cable GlandBARRIER CABLE GLAND FOR STEEL WIRE ARMOURED CABLE

8

Earth Tags

E16E20E25E32E40E50E63

M16M20M25M32M40M50M63

TBA20010050502525

6.356.356.356.356.356.356.35

Locknuts

Extension Nuts for UFPN Glands

L12LNB-16LNB-20LNB-25LNB-32LNB-40LNB-50LNB-63

L250L275L300L325L350L400

1/2 X 26 TPIM16 x 1.5M20 x 1.5M25 x 1.5M32 x 1.5M40 x 1.5M50 x 1.5M63 x 1.52.5 BSP2.75 BSP3.0 BSP3.25 BSP3.5 BSP4.0 BSP

100100100100100402520666664

EN20AEN20BEN20CEN25AEN32AEN32B

403739424547

282831364246

181410886

Part Suits Cable Gland Inner Number Gland Across Carton Corners Protrusion Pack (mm) (mm) Quantity

Orange Shrouds

CUT

LINE

FOR

MIN

IMUM

CAB

LEDI

AMET

ER

SHRO

UDNUM

BER

TO S

UIT

GLAN

DFR

OM

SEL

ECTI

ON

CHAR

T

MOUN

TING

THRE

AD

DIAM

ETER

EART

H B

OLT

DIAM

ETER

ACROSS FLATS

MOUNTING THREAD

CUT

LINE

FOR

MIN

IMUM

CAB

LEDI

AMET

ER

SHRO

UDNUM

BER

TO S

UIT

GLAN

DFR

OM

SEL

ECTI

ON

CHAR

T

MOUN

TING

THRE

AD

DIAM

ETER

EART

H B

OLT

DIAM

ETER

ACROSS FLATS

MOUNTING THREAD

CUT LINE FORMINIMUM CABLE

DIAMETER

SHROUDNUMBER

TO SUIT GLANDFROM SELECTION

CHART

MOUNTING THREAD

DIAMETER

EARTH BOLTDIAMETER

ACROSS FLATS

MOUN

TING TH

READ

PROTRUSION

EXTENSION NUT

ACRO

SS C

ORN

ERS

FLPW203B

FLPW206B

FLPW256B

FLPW326B

FLPW405B

FLPW503B

FLWN202FLWN203FLWN204FLWN205FLWN206FLWN253FLWN254FLWN255FLWN256FLWN323FLWN324FLWN325FLWN326FLWN403FLWN404FLWN405FLWN502FLWN503

WGN162WGN164WGN202WGN203WGN204

WGN206WGN254WGN256

WGN324WGN326

WGN403WGN404WGN405WGN502WGN503

S0-Orange

S1-Orange

S2-Orange

S3-Orange

S4-Orange

S5-Orange

S6-Orange

S7-Orange

UN20AUN20B

UN25A

UN32A

UN40A

UN40BUN50A

UN50BUN63A

UN63B

UFPN20AUFPN20B

UFPN20C

UFPN25A

UFPN32A

UFPN32B

UFPN40AUFPN40B

UFPN50AUFPN50B

UFPN63AUFPN63B

GN204GN206GN254GN256

GN324GN326

GN405

GN503GN505

GN636

Part Mounting Earth Inner Number Thread Bolt Carton Diameter Pack (mm) Quantity

Part Mounting Across Inner Number Thread Flats Carton Hexagon Pack (mm) Quantity

1620.727

31.640

48.257.38294102116116124140

150

140

110

90

70

50

40

18

Part Cable Gland Number UN UFPN GN WGN FLWN FLPWB Carton Pack Quantity

UFPN20AUFPN20BUFPN20CUFPN25AUFPN32AUFPN32B

Cable Gland Accessories

9

UB4PUB8P

UB13P

UB17PUB22P

UB27P

UB31P

UB36PUB41P

UB45P

UB117P

UB118PUB119P

UB517P

UB518P

WGN162WGN164WGN202WGN203WGN204WGN206

WGN254WGN256

WGN324WGN326

WGN403WGN404WGN405

WGN502WGN503WGN504WGN505WGN634WGN635WGN636

WGN753WGN754WGN755

WGN10AWGN10B

1/2M16

M20

M20M25

M32

M40

M50M50

M63

2.5 BSP

2.75 BSP3 BSP

3.5 BSP

4 BSP

UN12AUN16A

UN20A

UN20BUN25A

UN32A

UN40AUN40B

UN50AUN50B

UN63AUN63B

FLWN202FLWN203FLWN204FLWN205FLWN206

FLWN253FLWN254FLWN255FLWN256FLWN323FLWN324FLWN325FLWN326FLWN403FLWN404FLWN405

FLWN502FLWN503FLWN504FLWN505FLWN633FLWN634FLWN635FLWN636FLWN753FLWN754FLWN755

UFPN20AUFPN20BUFPN20C

UFPN25A

UFPN32AUFPN32B

UFPN40AUFPN40B

UFPN50AUFPN50B

UFPN63AUFPN63B

UFPN250A

UFPN275AUFPN300A

UFPN350AUFPN350BUFPN400AUFPN400B

FLPW203BFLPW206B

FLPW256B

FLPW326B

FLPW405B

FLPW503BFLPW505B

FLPW635BFLPW636B

FLPW754BFLPW755B

100100

100

100100

100

100

100100

20

20

2020

20

20

IP66/68 GASKETAs supplied with glands

Fibre Gasket

Part Mounting Cable Gland Number Thread UN UFPN WGN FLWN FLPWB Carton Size Pack Quantity

Nicote Accessories

10

ApplicationsIndoor and outdoor use in harsh environments

StandardsAS60529-2004

FunctionProvides seal on cable sheath

Protection ClassIP65

ConstructionBody and compression nut304 Stainless Steel

SSG Cable GlandGENERAL PURPOSE STAINLESS STEEL CABLE GLANDS

Stainless Steel Cable Glands are high quality glands designed for use in severe environments. Made from 304 grade stainless steel, each gland features a wide cable diameter range and UP65 protection.

8.411.516.321

27.7

3.56.4111519

M16x1.5M20x1.5M20x1.5M25x1.5M32x1.5

Part Mounting Cable Acceptance Number Thread Details Across Pack Size Length Overall Diameter Corners Qty (mm) (mm) Min (mm) Max (mm) (mm)

SSG-16-8SSG-20-11SSG-20-16

SSG-25SSG-32

1010121212

5025252510

2222

27.53240

MOUN

TING

THRE

AD

ACRO

SS C

ORN

ERS

CABL

E OV

ERAL

L

MAX

BODY

SEAL

SKID WASHER

NUT

PROTRUSIONTHREADLENGTH

Pro

duct

spe

cific

atio

ns m

ay c

hang

eat

any

tim

e w

ithou

t not

ice.

11

For further information, contact Thomas & Betts National Support Centre onPhone 1300 666 595 Fax 1300 666 594 Email austsales@tnb.com Website www.tnbaust.comThomas & Betts Australasia Pty Ltd Head Office,

Suite 3, Level 7, 3 Rider Boulevard, Rhodes NSW 2138 Australia ABN 62 074 810 898