ni-mh battery (ltspice simplified model)
TRANSCRIPT
![Page 1: Ni-MH battery (LTspice simplified Model)](https://reader034.vdocuments.us/reader034/viewer/2022050621/55cd53eebb61eb192b8b45cc/html5/thumbnails/1.jpg)
Nickel-Metal Hydride BatterySimplified SPICE Behavioral Model
All Rights Reserved Copyright (C) Bee Technologies Corporation 2011 1
![Page 2: Ni-MH battery (LTspice simplified Model)](https://reader034.vdocuments.us/reader034/viewer/2022050621/55cd53eebb61eb192b8b45cc/html5/thumbnails/2.jpg)
Contents
1. Benefit of the Model
2. Model Feature
3. Concept of the Model
4. Parameter Settings
5. Ni-Mh Battery Specification (Example)
5.1 Charge Time Characteristic
5.2 Discharge Time Characteristic
5.3 Vbat vs. SOC Characteristic
6. Extend the number of Cell (Example)
6.1 Charge Time Characteristic, NS=7
6.2 Discharge Time Characteristic, NS=7
Library Files and Symbol Files Location
Simulation Index
All Rights Reserved Copyright (C) Bee Technologies Corporation 2011 2
![Page 3: Ni-MH battery (LTspice simplified Model)](https://reader034.vdocuments.us/reader034/viewer/2022050621/55cd53eebb61eb192b8b45cc/html5/thumbnails/3.jpg)
1. Benefit of the Model
• The model enables circuit designer to predict and optimize Ni-MH
battery runtime and circuit performance.
• The model can be easily adjusted to your own Ni-MH battery
specifications by editing a few parameters that are provided in the
datasheet.
• The model is optimized to reduce the convergence error and the
simulation time.
All Rights Reserved Copyright (C) Bee Technologies Corporation 2011 3
![Page 4: Ni-MH battery (LTspice simplified Model)](https://reader034.vdocuments.us/reader034/viewer/2022050621/55cd53eebb61eb192b8b45cc/html5/thumbnails/4.jpg)
• This Ni-MH Battery Simplified SPICE Behavioral Model is for users who
require the model of a Ni-MH Battery as a part of their system.
• The model accounts for Battery Voltage(Vbat) vs. Battery Capacity Level
(SOC) Characteristic, so it can perform battery charge and discharge time at
various current rate conditions.
• As a simplified model, the effects of cycle number and temperature are
neglected.
2. Model Feature
All Rights Reserved Copyright (C) Bee Technologies Corporation 2011 4
Equivalent circuit of Li-Ion Battery model
![Page 5: Ni-MH battery (LTspice simplified Model)](https://reader034.vdocuments.us/reader034/viewer/2022050621/55cd53eebb61eb192b8b45cc/html5/thumbnails/5.jpg)
3. Concept of the Model
All Rights Reserved Copyright (C) Bee Technologies Corporation 2011 5
Ni-Mh battery
Simplified SPICE Behavioral Model
[Spec: C, NS]
Adjustable SOC [ 0-1(100%) ]
+
-
• The model is characterized by parameters: C which represent the battery
capacity and SOC which represent the battery initial capacity level.
• Open-circuit voltage (VOC) vs. SOC is included in the model as an analog
behavioral model (ABM).
• NS (Number of Cells in series) is used when the Ni-mh cells are in series to
increase battery voltage level.
Output Characteristics
![Page 6: Ni-MH battery (LTspice simplified Model)](https://reader034.vdocuments.us/reader034/viewer/2022050621/55cd53eebb61eb192b8b45cc/html5/thumbnails/6.jpg)
4. Parameter Settings
• From the Ni-Mh Battery specification, the model is characterized by setting parameters
C, NS, SOC and TSCALE.
All Rights Reserved Copyright (C) Bee Technologies Corporation 2011 6
C is the amp-hour battery capacity [Ah]
– e.g. C = 0.3, 1.4, or 2.8 [Ah]
NS is the number of cells in series
– e.g. NS=1 for 1 cell battery, NS=2 for 2 cells battery (battery voltage is double from 1 cell)
SOC is the initial state of charge in percent
– e.g. SOC=0 for a empty battery (0%), SOC=1 for a full charged battery (100%)
TSCALE turns TSCALE seconds(in the real world) into a
second(in simulation)
– e.g. TSCALE=60 turns 60s or 1min (in the real world)into a second(in simulation), TSCALE=3600 turns 3600s or 1h into a second.
Model Parameters:
(Default values)
![Page 7: Ni-MH battery (LTspice simplified Model)](https://reader034.vdocuments.us/reader034/viewer/2022050621/55cd53eebb61eb192b8b45cc/html5/thumbnails/7.jpg)
5. Ni-Mh Battery Specification (Example)
• The battery information refer to a battery part number HF-A1U of SANYO.
All Rights Reserved Copyright (C) Bee Technologies Corporation 2011 7
Nominal Voltage 1.2V
Capacity
Typical 1350mAh
Minimum 1250mAh
Charging Current Time 1350mA about 1.1h
Discharge cut-off voltage 1.0VBattery capacity
[Typ.] is input as a
model parameter
![Page 8: Ni-MH battery (LTspice simplified Model)](https://reader034.vdocuments.us/reader034/viewer/2022050621/55cd53eebb61eb192b8b45cc/html5/thumbnails/8.jpg)
5.1 Charge Time Characteristic
All Rights Reserved Copyright (C) Bee Technologies Corporation 2011 8
• Charging Current: 1350mA about 1.1h
(min.)
Measurement Simulation
Charge: 1350mA
SOC=0 means
battery start from 0%
of capacity (empty)
![Page 9: Ni-MH battery (LTspice simplified Model)](https://reader034.vdocuments.us/reader034/viewer/2022050621/55cd53eebb61eb192b8b45cc/html5/thumbnails/9.jpg)
5.1 Charge Time Characteristic Simulation Circuit and Setting
.TRAN 0 62 0 0.025
.LIB ni-mh_battery.sub
All Rights Reserved Copyright (C) Bee Technologies Corporation 2011 9
Charge Voltage
A constant current charger at
rate of capacity (e.g. 11350mA)
1 minute into a second
(in simulation)
![Page 10: Ni-MH battery (LTspice simplified Model)](https://reader034.vdocuments.us/reader034/viewer/2022050621/55cd53eebb61eb192b8b45cc/html5/thumbnails/10.jpg)
5.2 Discharge Time Characteristic
.TRAN 0 360 0 100m
.STEP PARAM rate LIST 0.2, 1, 2
.LIB ni-mh_battery.sub
All Rights Reserved Copyright (C) Bee Technologies Corporation 2011 10
0.2C
1C
2C
(min.)
• Battery voltage vs. time are simulated at 0.2C, 1.0C, and 2.0C discharge rates.
TSCALE turns 1 minute into a
second(in simulation), battery starts
from 100% of capacity (fully charged)
![Page 11: Ni-MH battery (LTspice simplified Model)](https://reader034.vdocuments.us/reader034/viewer/2022050621/55cd53eebb61eb192b8b45cc/html5/thumbnails/11.jpg)
0.0
0.2
0.4
0.6
0.8
1.0
1.2
0 1 2 3 4 5
Actu
al C
apacity
(% o
f R
ate
d C
apacity)
Discharge Rate (Multiples of C)
Mesurement
Simulation
5.3 Vbat vs. SOC Characteristic
All Rights Reserved Copyright (C) Bee Technologies Corporation 2011 11
• Nominal Voltage: 1.2V
• Capacity: 1350mAh
• Discharge cut-off voltage: 1.0V
2700mA
Measurement Simulation
Simulation
1350mA270mA
(Ah)
![Page 12: Ni-MH battery (LTspice simplified Model)](https://reader034.vdocuments.us/reader034/viewer/2022050621/55cd53eebb61eb192b8b45cc/html5/thumbnails/12.jpg)
5.3 Vbat vs. SOC Characteristic Simulation Circuit and Setting
All Rights Reserved Copyright (C) Bee Technologies Corporation 2011 12
.TRAN 0 360 0 100m
.STEP PARAM rate LIST 0.2, 1, 2
.LIB ni-mh_battery.sub
A constant current
discharger at rate of
capacity (e.g. 11350mA)
1 minute into a second
(in simulation)
![Page 13: Ni-MH battery (LTspice simplified Model)](https://reader034.vdocuments.us/reader034/viewer/2022050621/55cd53eebb61eb192b8b45cc/html5/thumbnails/13.jpg)
6. Extend the number of Cell (Example)
• The battery information refer to a battery part number HHR-150AAB01F7
of Panasonic.
All Rights Reserved Copyright (C) Bee Technologies Corporation 2011 13
Voltage - Rated 8.4V
Capacity 1500mAh
Structure 1 Row x 7 Cells Side to Side
Number of Cells 7
Basic Specification
2.1
4.8
VoltageNominal MH-Ni
RatedVoltageNS
The number of cells
in series is input as
a model parameter
Ni-MH needs 7
cells to reach this
voltage level
![Page 14: Ni-MH battery (LTspice simplified Model)](https://reader034.vdocuments.us/reader034/viewer/2022050621/55cd53eebb61eb192b8b45cc/html5/thumbnails/14.jpg)
6.1 Charge Time Characteristic, NS=7
• Charging Current: 300mA (0.2 Charge)
All Rights Reserved Copyright (C) Bee Technologies Corporation 2011 14
Voltage
(hour)
The battery needs 5 hours to be fully charged
![Page 15: Ni-MH battery (LTspice simplified Model)](https://reader034.vdocuments.us/reader034/viewer/2022050621/55cd53eebb61eb192b8b45cc/html5/thumbnails/15.jpg)
6.1 Charge Time Characteristic, NS=7
Simulation Circuit and Setting
.TRAN 0 5.2 0 2.5m
.LIB ni-mh_battery.sub
All Rights Reserved Copyright (C) Bee Technologies Corporation 2011 15
1 hour into a second
(in simulation)
Charge Voltage
![Page 16: Ni-MH battery (LTspice simplified Model)](https://reader034.vdocuments.us/reader034/viewer/2022050621/55cd53eebb61eb192b8b45cc/html5/thumbnails/16.jpg)
• Voltage - Rated: 8.4V
• Discharging Current: 300mA(0.2C), 750mA(0.5C), 1500mA(1.0C)
6.2 Discharge Time Characteristic, NS=7
All Rights Reserved Copyright (C) Bee Technologies Corporation 2011 16
(hour)
0.2C
1C
0.5C
![Page 17: Ni-MH battery (LTspice simplified Model)](https://reader034.vdocuments.us/reader034/viewer/2022050621/55cd53eebb61eb192b8b45cc/html5/thumbnails/17.jpg)
6.2 Discharge Time Characteristic, NS=7 Simulation Circuit and Setting
.TRAN 0 6 0 2.5m
.STEP PARAM rate LIST 0.2, 0.5, 1
.OPTIONS RELTOL=0.01
.LIB ni-mh_battery.sub
All Rights Reserved Copyright (C) Bee Technologies Corporation 2011 17
Parametric sweep “rate”
for multiple rate
discharge simulation
1 hour into a second
(in simulation)
![Page 18: Ni-MH battery (LTspice simplified Model)](https://reader034.vdocuments.us/reader034/viewer/2022050621/55cd53eebb61eb192b8b45cc/html5/thumbnails/18.jpg)
Library Files and Symbol Files Location
All Rights Reserved Copyright (C) Bee Technologies Corporation 2011 18
…\Simulation
C:\Program Files\LTC\LTspiceIV\lib\sub
C:\Program Files\LTC\LTspiceIV\lib\sym
Copy/
Paste
into
Copy/
Paste
into
1. Copy the library files (.lib) from the folder …\Simulation\.sub\, then paste into the folder C:\Program
Files\LTC\LTspiceIV\lib\sub
2. Copy the symbol files(.asy) from the folder …\Simulation\.asy\, then paste into the folder C:\Program
Files\LTC\LTspiceIV\lib\sym
![Page 19: Ni-MH battery (LTspice simplified Model)](https://reader034.vdocuments.us/reader034/viewer/2022050621/55cd53eebb61eb192b8b45cc/html5/thumbnails/19.jpg)
Simulation Index
All Rights Reserved Copyright (C) Bee Technologies Corporation 2011 19
Simulations Folder name
1. Charge Time Characteristic.................................
2. Discharge Time Characteristic.............................
3. Vbat vs. SOC Characteristic..................................
4. Charge Time Characteristic, NS=7.......................
5. Discharge Time Characteristic, NS=7...................
Charge_Time
Discharge_Time
Discharge_SOC
Charge_Time(NS)
Discharge_Time(NS)