nh akustik brochure
TRANSCRIPT
n’H Akustik + Design AG
www.topakustik.ch
Aesthetic Acoustics
Prospektneu-E-03-04_lds 8.9.2006 8:20 Uhr Seite 1
pyramide d’ordu concoursde l’innovation
BATIMAT PARIS
Good-sounding Benefits for room acoustic applications
Aesthetic Acoustics
TOPAKUSTIK and TOPPERFO combine acoustics and aesthetics in the best possible way. The aesthetically
attractive acoustic surfaces offer high sound absorption and the possibility of varying the absorption without
changing the surface appearance.
TOPAKUSTIK planks permit unlimited sequencing and make a joint-free ceiling and wall design possible.
And don’t forget the importance of wood as an acoustic design material. Wood radiates an atmosphere and
warmth second to none. TOPAKUSTIK and TOPPERFO provide aesthetics and acoustics.
Harmony in Variations
Many TOPAKUSTIK and TOPPERFO types are available. These can be provided with all the customary wood
veneers, all colors based on RAL or NCS and various melamine coatings (eco-collection). This broad spec-
trum of variations is sure to meet all individual décor requirements.
TOPAKUSTIK and TOPPERFO cores are produced in MDF, fire-retardant MDF or non-combustible gypsum, de-
pending upon the fire safety specifications required.
Custom Production
TOPAKUSTIK and TOPPERFO are custom produced in our Lungern, Switzerland factory specifically for each
order. This enables production of all formats and sizes to match your building project. The panel joints can
match the architectural installation grid spacing and a wide variety of veneers can match existing colors and
textures. A wide variety of panel edge conditions is also available.
Overture to Finale
From planning to installation, we support you with extensive services and selection.
To help you make the correct choice, we provide product samples and absorption coefficients (to ISO 354) for
all our products. For planning purposes, you will find a great deal of useful information in this brochure. Natu-
rally, our specialists are also at your disposal – from planning to installation. The installation itself is done by
the approved contractor.
Trend-setting ...
TOPAKUSTIK was developed in 1991 and has successfully been used in numerous projects since then. Groo-
ves on the visible side – perforation on the rear – a simple, refined idea, which has now become the leading
acoustic system made of wood.
n’H Akustik + Design AG has also helped conventional perforated panels to gain an attractive appearance with
the dual-diameter hole pattern (T-drilling).
Innovation is one thing, quality with regard to the material and service another. Both are guaranteed by the
qualified and highly capable n’H team from Lungern – from the heart of Switzerland.
swiss patent no.683112
EU patent no.0504 629
USA patent no.5,362,931
+ 5,422,446
PATENTS
Cer
tifie
dManagement System
Reg. Nr. 14927
ISO 9001 : 2000
Prospektneu-E-03-04_lds 8.9.2006 8:20 Uhr Seite 2
< 2 3
4>
5>
6>
7>
8>
9>
10>
11>
12>
13>
14>
15>
16>
17>
18>
19>
20>
21>
22>
23>
General
6/2
5/3
4/4
9/2, 14/2
13/3
12/4
28/4, Caro
General
TOPPERFO T
TOPPERFO M
TOPPERFO Clou
Core panels
Surfaces
Edges + Accessories
Mounting
Cabinet fronts,Shapes
Sports halls,Swimming pools
References
n’H Service
contents
A broad spectrum of perforati-
ons for wall and ceiling finis-
hes. Conventional M-Perforati-
on, discreet T-Perforation or
Microperforation (Clou). Avai-
lable in panels (up to 3600 x
1200 mm) for walls, ceilings
and cabinet fronts.
The refined acoustic system
for wall and ceiling finishes.
Many different groove pat-
terns with variable acoustics.
Available in planks with a ton-
gue and groove connection
(plank width = 128 mm*) for
joint-free surface treatment
or in panels (panel width =
300–1200 mm) for remova-
ble or fixed ceilings or cabinet
fronts.
*1 INCH = 25.4 mm e.q. 128 mm = 5.04”
The information highligted in yellow boxes is very
important and should be read carefully !
Prospektneu-E-03-04_lds 8.9.2006 8:20 Uhr Seite 3
TOPAKUSTIK Perforation M TOPAKUSTIK Perforation T TOPAKUSTIK reflektierend
1.2
1
0.8
0.6
0.4
0.2
0
100
160
250
400
630
1000
1600
2500
4000
TOPAKUSTIK Perforation M TOPAKUSTIK Perforation T TOPAKUSTIK reflektierend
α sHz 5
0 m
m 20
0 m
m
Planks 128 mm in widthThanks to the precise tongue and groove connection, planks result in an at-
tractive surface with a joint-free effect, because the connecting joint mat-
ches the dimension of the grooves. The planks permit simple and flexible
assembly. They can be installed by stapling to a nailing strip or clamping to
a T-bar with Topakustik clips. (Assembly p. 19)
Panels from 300 mm to 1200 mm in widthPanels are used for removable or fixed ceilings and walls with visible joints.
Panels can be provided with a number of differing edges (p. 18) and are
also suited for cabinet fronts and room dividers.
T-Perforation: For high absorption
in the low to medium frequency range.
The high absorption in the low-frequency
range is based on the combination of
small holes on the visible side and larger
holes on the rear.
M-Perforation: For high absorption
in the medium to high frequency range.
TOPAKUSTIK products with M-Perforation
are suited for applications in which the
reverberation time is to be lowered
across a broad frequency band.
Reflectors: TOPAKUSTIK products
can also be used as reflectors by elimi-
nating the perforations on the rear sur-
face. The absorption figures are thus
equivalent to those of a standard reflec-
ting panel.
The refined acoustic system for wall and ceiling finishes. Many different
groove patterns are available. Narrow spaced grooves appear as a textured
surface (4/4, 5/3, 6/2, 9/2) – wider spaced grooves can be seen individually by
the eyes (12/4, 13/3, 14/2, 28/4)*. Thanks to the rear perforation pattern, the
core panel retains its stability. For example, cut-outs are possible everywhere.
The Acoustic System
All TOPAKUSTIK types are available with M and T perforations on the rear. This makes it possible for acousticians to match the TOPAKUSTIK surfa-
ce treatment with the required absorption. The absorption coefficients stated in this brochure were measured according to the ISO 354 standard
and are set up as described above. Additional absorption coefficients with other cavity depths and other porous materials in the air cavity (e.g. only
fleece, melamine resin foam, fiberglass, etc.) are listed in the TOPAKUSTIK / TOPPERFO sound absorption document (p. 23).
Total thickness 50 mm Total thickness 200 mm
4 air cavity
3 Mineral wool 30 mm (40-60 kg/m3; 2.5 – 3.75 pcf )
2 Acoustic fleece SP 60 laminated
1 TOPAKUSTIK element in 16 mm MDF
321
321
4
4
Measured according to ISO 354:
Please note: walls finished with lighter veneers (maple, birch) or lighter paint
(white) can because of the light-dark-contrast from surface to grooves create a
visually distrubing effect. We recommend using the TOPAKUSTIK designs with
2 mm wide groove e.g. type 6/2, 9/2 or 14/2 and/or using darker veneers or
darker paint colours.
Prospektneu-E-03-04_lds 8.9.2006 8:20 Uhr Seite 4
< 4 5
1.2
1
0.8
0.6
0.4
0.2
0
100
160
250
400
630
1000
1600
2500
4000
α sHz
86 2
TOPAKUSTIK FinelineTOPAKUSTIK Fineline
16
(1
7)
6/2 M or T for walls, ceilings and doors
6/2 M, 7%
1 BCV Bank, Lausanne, Switzerland 2 NKB Bank Lobby, Stans, Switzerland 3 Army Education Center, Lucerne, Switzerland 4 Army Education Center, Lucerne, Switzerland
6/2 T
Core panel Fire category B2 (p. 16) Fire category B1 (p. 16) Fire category A2 (p. 16)
Planks ideal: ideal: ideal: ideal: ideal: ideal: ideal: ideal:
w = 128 mm 2780 x 128 2780 x 128 2780 x 128 2780 x 128 2780 x 128 2780 x 128 2550 x 128 2550 x 128
3640 x 128 3640 x 128 3640 x 128 3640 x 128 2950 x 128 2950 x 128
4080 x 128 4080 x 128 4080 x 128 4080 x 128 4080 x 128 4080 x 128
Panels maximum size maximum size maximum size maximum size maximum size maximum size maximum size maximum size
w=320–1216 mm 3640 x 1216 3640 x 1216 3640 x 1216 3640 x 1216 3640 x 1216 3640 x 1216 2980 x 992 2980 x 992
ideal: ideal: ideal: ideal: ideal: ideal: ideal: ideal:
2040 x 960 2040 x 960 2040 x 960 2040 x 960 2040 x 960 2040 x 960 2580 x 576 2580 x 576
2600 x 960 2600 x 960 2780 x 960 2600 x 960 2600 x 960 2780 x 960 2980 x 576 2980 x 576
3640 x 608 3640 x 608 3640 x 608 3640 x 608
ideal means optimal use of MDF core – custom lengths are also available Date 08/2006 – please check the current dimensions on www.topakustik.ch
Lamellen/Paneele
Isometrie mit 74°
Lamellen/Paneele
Isometrie mit 74°
200mm Total thickness50mm Total thickness
Surface Colors Natural wood eco Colors Natural wood eco Colors Natural woodThickness 16 mm 17 mm 16 mm 16 mm 17 mm 16 mm 16 mm 16 mm
1 2
3
4
1.2
1
0.8
0.6
0.4
0.2
0
100
160
250
400
630
1000
1600
2500
4000
α sHz
200mm Total thickness50mm Total thickness
Prospektneu-E-03-04_lds 8.9.2006 8:21 Uhr Seite 5
35 8
1.2
1
0.8
0.6
0.4
0.2
0
100
160
250
400
630
1000
1600
2500
4000
1.2
1
0.8
0.6
0.4
0.2
0
100
160
250
400
630
1000
1600
2500
4000
1.2
1
0.8
0.6
0.4
0.2
0
100
160
250
400
630
1000
1600
2500
4000
Lamellen/Paneele
Isometrie mit 74°
16
8
TOPAKUSTIK 5/3
35
16
(1
7)
TOPAKUSTIK 5/3
α sHz
α sHz
α sHz
Core panel Fire category B2 (p. 16) Fire category B1 (p. 16) Fire category A2 (p. 16)
Planks ideal: ideal: ideal: ideal: ideal: ideal: ideal: ideal:
w = 128 mm 2780 x 128 2780 x 128 2780 x 128 2780 x 128 2780 x 128 2780 x 128 2550 x 128 2550 x 128
3640 x 128 3640 x 128 3640 x 128 3640 x 128 2950 x 128 2950 x 128
4080 x 128 4080 x 128 4080 x 128 4080 x 128 4080 x 128 4080 x 128
Panels maximum size maximum size maximum size maximum size maximum size maximum size maximum size maximum size
w=320–1216 mm 3640 x 1216 3640 x 1216 3640 x 1216 3640 x 1216 3640 x 1216 3640 x 1216 2980 x 992 2980 x 992
ideal: ideal: ideal: ideal: ideal: ideal: ideal: ideal:
2040 x 960 2040 x 960 2040 x 960 2040 x 960 2040 x 960 2040 x 960 2580 x 576 2580 x 576
2600 x 960 2600 x 960 2780 x 690 2600 x 960 2600 x 960 2780 x 960 2980 x 576 2980 x 576
3640 x 608 3640 x 608 3640 x 608 3640 x 608
ideal means optimal use of MDF core – custom lengths are also available Date 08/2006 – please check the current dimensions on www.topakustik.ch
Lamellen/Paneele
Isometrie mit 74°
Lamellen/Paneele
Isometrie mit 74°
Surface Colors Natural wood eco Colors Natural wood eco Colors Natural woodThickness 16 mm 17 mm 16 mm 16 mm 17 mm 16 mm 16 mm 16 mm
5/3 M or T for walls* and ceilings
Core panel B2 (CH 4.3)
Surface colors
Planks ideal:
w = 128 mm 2730 x 128
3600 x 128
4040 x 128
5/3 R for ceilings
5/3 M, 19% 5/3 M, 12% 5/3 T
5 Ministry of Foreign Affairs Lobby, Berlin, Germany 6 CPNVD Yverdon-les-Bains, Switzerland 7 RSI Broadcast Studio, Lugano, Switzerland 8 Military College, Dresden, Germany
*Please remember: for wall finishes in heavy traffic areas, we recommend TOPAKUSTIK elements with wider spaced grooves.
200mm50mm
Total thickness200mm
50mm
Total thickness200mm
50mm
Total thickness
5 6 7
8
Prospektneu-E-03-04_lds 8.9.2006 8:21 Uhr Seite 6
< 6 7
844
TOPAKUSTIK 4/4
1.2
1
0.8
0.6
0.4
0.2
0
100
160
250
400
630
1000
1600
2500
4000
16
(1
7)
TOPAKUSTIK 4/4
α sHz
4/4 for ceilings
4/4 M, 25%
9 Chapel Walchwil, Switzerland 10 School La Fontaine, Geneva, Switzerland
200mm50mm
Total thickness
Core panel Fire category B2 (p. 16) Fire category B1 (p. 16)
Planks ideal: ideal: ideal: ideal: ideal: ideal:
w = 128 mm 2780 x 128 2780 x 128 2780 x 128 2780 x 128 2780 x 128 2780 x 128
3640 x 128 3640 x 128 3640 x 128 3640 x 128
4080 x 128 4080 x 128 4080 x 128 4080 x 128 4080 x 128 4080 x 128
Panels maximum size maximum size maximum size maximum size maximum size maximum size
w=320–1216 mm 3640 x 1216 3640 x 1216 3640 x 1216 3640 x 1216 3640 x 1216 3640 x 1216
ideal: ideal: ideal: ideal: ideal: ideal:
2040 x 960 2040 x 960 2040 x 960 2040 x 960 2040 x 960 2040 x 960
2600 x 960 2600 x 960 2780 x 960 2600 x 960 2600 x 960 2780 x 960
3640 x 608 3640 x 608 3640 x 608 3640 x 608
ideal means optimal use of MDF core – custom lengths are also available Date 08/2006 – please check the current dimensions on www.topakustik.ch
Lamellen/Paneele
Isometrie mit 74°
Lamellen/Paneele
Isometrie mit 74°
Surface Colors Natural wood eco Colors Natural wood eco Thickness 16 mm 17 mm 16 mm 16 mm 17 mm 16 mm
9 10
Prospektneu-E-03-04_lds 8.9.2006 8:21 Uhr Seite 7
1.2
1
0.8
0.6
0.4
0.2
0
100
160
250
400
630
1000
1600
2500
4000
1.2
1
0.8
0.6
0.4
0.2
0
100
160
250
400
630
1000
1600
2500
4000
TOPAKUSTIK 8.66/2
28.7 10.7 32
2
TOPAKUSTIK 14/2
14 16
16
(1
7)
TOPAKUSTIK 8.66/2
TOPAKUSTIK 14/2
16
(1
7)
α sHz
α sHz
9/2 M + Typ 14/2 M for walls, ceilings and doors
9/2 M, 6% 14/2 M, 7%
200 mm Total thickness50 mm Total thickness
200 mm Total thickness50 mm Total thickness
11 Acoustical Cabinets in Swiss Ministry, Bern, Switzerland 12 Swiss Red Cross Cafeteria, Bern, Switzerland 13 Sala Gran Consiglio, Ticino, Switzerland 14 Medtronic Europe SA, Switzerland
Core panel Fire category B2 (p. 16) Fire category B1 (p. 16) Fire category A2 (p. 16)
Planks ideal: ideal: ideal: ideal: ideal: ideal: ideal: ideal:
w = 128 mm 2780 x 128 2780 x 128 2780 x 128 2780 x 128 2780 x 128 2780 x 128 2550 x 128 2550 x 128
3640 x 128 3640 x 128 3640 x 128 3640 x 128 2950 x 128 2950 x 128
4080 x 128 4080 x 128 4080 x 128 4080 x 128 4080 x 128 4080 x 128
Panels maximum size maximum size maximum size maximum size maximum size maximum size maximum size maximum size
w=320–1216 mm 3640 x 1216 3640 x 1216 3640 x 1216 3640 x 1216 3640 x 1216 3640 x 1216 2980 x 992 2980 x 992
ideal: ideal: ideal: ideal: ideal: ideal: ideal: ideal:
2040 x 960 2040 x 960 2040 x 960 2040 x 960 2040 x 960 2040 x 960 2580 x 576 2580 x 576
2600 x 960 2600 x 960 2780 x 960 2600 x 960 2600 x 960 2780 x 960 2980 x 576 2980 x 576
3640 x 608 3640 x 608 3640 x 608 3640 x 608
ideal means optimal use of MDF core – custom lengths are also available Date 08/2006 – please check the current dimensions on www.topakustik.ch
Lamellen/Paneele
Isometrie mit 74°
Lamellen/Paneele
Isometrie mit 74°
Surface Colors Natural wood eco Colors Natural wood eco Colors Natural woodThickness 16 mm 17 mm 16 mm 16 mm 17 mm 16 mm 16 mm 16 mm
11 12
Prospektneu-E-03-04_lds 8.9.2006 8:21 Uhr Seite 8
< 8 9
1.4
1.2
1
0.8
0.6
0.4
0.2
0
100
160
250
400
630
1000
1600
2500
4000
1.2
1
0.8
0.6
0.4
0.2
0
100
160
250
400
630
1000
1600
2500
4000
1.2
1
0.8
0.6
0.4
0.2
0
100
160
250
400
630
1000
1600
2500
4000
1613
TOPAKUSTIK 13/3
31
6 (
17
)
TOPAKUSTIK 13/3
α sHz
α sHz
α sHz
13/3 M or T for walls, ceilings and doors
13/3 M, 12% 13/3 M, 6% 13/3 T
200 mm Total thickness50 mm Total thickness
200 mm Total thickness50 mm Total thickness
200 mm50 mm
Core panel Fire category B2 (p. 16) Fire category B1 (p. 16) Fire category A2 (p. 16)
Planks ideal: ideal: ideal: ideal: ideal: ideal: ideal: ideal:
w = 128 mm 2780 x 128 2780 x 128 2780 x 128 2780 x 128 2780 x 128 2780 x 128 2550 x 128 2550 x 128
3640 x 128 3640 x 128 3640 x 128 3640 x 128 2950 x 128 2950 x 128
4080 x 128 4080 x 128 4080 x 128 4080 x 128 4080 x 128 4080 x 128
Panels maximum size maximum size maximum size maximum size maximum size maximum size maximum size maximum size
w=320–1216 mm 3640 x 1216 3640 x 1216 3640 x 1216 3640 x 1216 3640 x 1216 3640 x 1216 2980 x 992 2980 x 992
ideal: ideal: ideal: ideal: ideal: ideal: ideal: ideal:
2040 x 960 2040 x 960 2040 x 960 2040 x 960 2040 x 960 2040 x 960 2580 x 576 2580 x 576
2600 x 960 2600 x 960 2780 x 960 2600 x 960 2600 x 960 2780 x 960 2980 x 576 2980 x 576
3640 x 608 3640 x 608 3640 x 608 3640 x 608
ideal means optimal use of MDF core – custom lengths are also available Date 08/2006 – please check the current dimensions on www.topakustik.ch
Lamellen/Paneele
Isometrie mit 74°
Lamellen/Paneele
Isometrie mit 74°
Surface Colors Natural wood eco Colors Natural wood eco Colors Natural woodThickness 16 mm 17 mm 16 mm 16 mm 17 mm 16 mm 16 mm 16 mm
13
14
Prospektneu-E-03-04_lds 8.9.2006 8:22 Uhr Seite 9
1.2
1
0.8
0.6
0.4
0.2
0
100
160
250
400
630
1000
1600
2500
4000
1.2
1
0.8
0.6
0.4
0.2
0
100
160
250
400
630
1000
1600
2500
4000
1.2
1
0.8
0.6
0.4
0.2
0
100
160
250
400
630
1000
1600
2500
4000
16412
TOPAKUSTIK 12/4
16412
TOPAKUSTIK 12/4 HR
16
(1
7)
TOPAKUSTIK 12/4
19
TOPAKUSTIK 12/4 HR
α sHz
α sHz
α sHzLamellen/Paneele
Isometrie mit 74°
12/4 M or T for walls, ceilings and doors
12/4 HR for ceilings
12/4 M, 15% 12/4 T 12/4 HR, 15%
15 Restaurant Compas, Vernier, Switzerland 16 Swiss Headquarters Shell Oil, Baar, Switzerland 17-19 Reichstag Assembly Hall, Berlin, Germany 20 Sudwestbank Lobby,Stuttgart, Germany
Core panel B2 (p. 16)
Surface Colors Thickness 19 mm
Planks ideal:
w = 128 mm 2730 x 128
3600 x 128
4040 x 128200mm
50mm
Total thickness200mm
50mm
Total thickness200mm
50mm
Total thickness
Core panel Fire category B2 (p. 16) Fire category B1 (p. 16) Fire category A2 (p. 16)
Planks ideal: ideal: ideal: ideal: ideal: ideal: ideal: ideal:
w = 128 mm 2780 x 128 2780 x 128 2780 x 128 2780 x 128 2780 x 128 2780 x 128 2550 x 128 2550 x 128
3640 x 128 3640 x 128 3640 x 128 3640 x 128 2950 x 128 2950 x 128
4080 x 128 4080 x 128 4080 x 128 4080 x 128 4080 x 128 4080 x 128
Panels maximum size maximum size maximum size maximum size maximum size maximum size maximum size maximum size
w=320–1216 mm 3640 x 1216 3640 x 1216 3640 x 1216 3640 x 1216 3640 x 1216 3640 x 1216 2980 x 992 2980 x 992
ideal: ideal: ideal: ideal: ideal: ideal: ideal: ideal:
2040 x 960 2040 x 960 2040 x 960 2040 x 960 2040 x 960 2040 x 960 2580 x 576 2580 x 576
2600 x 960 2600 x 960 2780 x 960 2600 x 960 2600 x 960 2780 x 960 2980 x 576 2980 x 576
3640 x 608 3640 x 608 3640 x 608 3640 x 608
ideal means optimal use of MDF core – custom lengths are also available Date 08/2006 – please check the current dimensions on www.topakustik.ch
Lamellen/Paneele
Isometrie mit 74°
Lamellen/Paneele
Isometrie mit 74°
Surface Colors Natural wood eco Colors Natural wood eco Colors Natural woodThickness 16 mm 17 mm 16 mm 16 mm 17 mm 16 mm 16 mm 16 mm
15
16
17
18 19
Prospektneu-E-03-04_lds 8.9.2006 8:22 Uhr Seite 10
< 10 11
1.2
1
0.8
0.6
0.4
0.2
0
100
160
250
400
630
1000
1600
2500
4000
1.2
1
0.8
0.6
0.4
0.2
0
100
160
250
400
630
1000
1600
2500
4000
3228 4
TOPAKUSTIK 28/4
3228 4
CARO
16
(1
7)
TOPAKUSTIK 28/4
16
(1
7)
CARO
α sHz
α sHz
28/4 M or T for walls, ceilings and doors
CARO 15%28/4 T28/4 M, 7,5%
200mm50mm
200mm50mm
21 Brugg Music Conservatory, Switzerland 22 n’H Conference Room, Lungern, Switzerland 23 State House, Frickingen, Germany 24 Aareschlucht Restaurant, Switzerland
Total thickness Total thickness
Core panel Fire category B2 (p. 16) Fire category B1 (p. 16) Fire category A2 (p. 16)
Planks ideal: ideal: ideal: ideal: ideal: ideal: ideal: ideal:
w = 128 mm 2780 x 128 2780 x 128 2780 x 128 2780 x 128 2780 x 128 2780 x 128 2550 x 128 2550 x 128
3640 x 128 3640 x 128 3640 x 128 3640 x 128 2950 x 128 2950 x 128
4080 x 128 4080 x 128 4080 x 128 4080 x 128 4080 x 128 4080 x 128
Panels maximum size maximum size maximum size maximum size maximum size maximum size maximum size maximum size
w=320–1216 mm 3640 x 1216 3640 x 1216 3640 x 1216 3640 x 1216 3640 x 1216 3640 x 1216 2980 x 992 2980 x 992
ideal: ideal: ideal: ideal: ideal: ideal: ideal: ideal:
2040 x 960 2040 x 960 2040 x 960 2040 x 960 2040 x 960 2040 x 960 2580 x 576 2580 x 576
2600 x 960 2600 x 960 2780 x 960 2600 x 960 2600 x 960 2780 x 960 2980 x 576 2980 x 576
3640 x 608 3640 x 608 3640 x 608 3640 x 608
ideal means optimal use of MDF core – custom lengths are also available Date 08/2006 – please check the current dimensions on www.topakustik.ch
Lamellen/Paneele
Isometrie mit 74°
Lamellen/Paneele
Isometrie mit 74°
Surface Colors Natural wood eco Colors Natural wood eco Colors Natural woodThickness 16 mm 17 mm 16 mm 16 mm 17 mm 16 mm 16 mm 16 mm
2320
22 2421
Core panel Fire category B2 (p. 16) Fire category B1 (p. 16) Fire category A2 (p. 16)
Panels maximum size maximum size maximum size maximum size maximum size maximum size maximum size maximum size
w=320–1216 mm 2752 x 1216 2752 x 1216 2752 x 1216 2752 x 1216 2752 x 1216 2752 x 1216 1472 x 896 1472 x 896
ideal: ideal: ideal: ideal: ideal: ideal: ideal: ideal:
2048 x 992 2048 x 992 2048 x 992 2048 x 992 2048 x 992 2048 x 992 1472 x 576 1472 x 576
2752 x 992 2752 x 992 2752 x 992 2752 x 992 2752 x 992 2752 x 992
Surface Colors Natural wood eco Colors Natural wood eco Colors Natural woodThickness 16 mm 17 mm 16 mm 16 mm 17 mm 16 mm 16 mm 16 mm
Prospektneu-E-03-04_lds 8.9.2006 8:22 Uhr Seite 11
1616161616 16
TOPPERFO T 16/16/12-3
TOPPERFO T 16/16/12-4
TOPPERFO T 16/16/12-5
1.2
1
0.8
0.6
0.4
0.2
0
100
160
250
400
630
1000
1600
2500
4000
α sHz 5
0 m
m 20
0 m
m
TOPPERFO are perforated acoustic panels individually produced specifi-
cally for each project. Various panel sizes and hole diameters are availa-
ble for selection. TOPPERFO-T and TOPPERFO-Clou, developed by n’H,
are discreet in their appearance and simultaneously very effective in
sound absorption thanks to the small hole diameters. TOPPERFO panels
can be provided with various edge designs.
T-Perforation: For high absorption
in the low to medium frequency range.
The high absorption in the low-frequency
range is based on the combination of
small diameter holes on the visible side
and larger diameter holes on the rear.
The small perforations present an
aesthetic surface suited for wall finishes.
M-Perforation: For high absorption
in the medium to high frequency range.
The absorption depends on the percent
open area, the depth of the rear air cavi-
ty between the acoustic elements and
the ceiling or wall and the porous ab-
sorption in the cavity.
Reflectors: TOPPERFO products
can also be used as reflectors by elimi-
nating the perforations on the rear sur-
face. The absorption figures are thus
equivalent to those of a standard reflec-
ting panel.
To obtain a uniform distance of 16 mm or 20 mm between perforations and between the last
perforation and the edge of the panel, the center-to-center mounting grid dimension (inclu-
ding a joint separation of at least 3 mm for thermal expansion) must be divisible by 16 mm
or 20 mm.
Perforation dimensions and possibilities
The Acoustic System
All TOPPERFO types are available with M and T perforations on the rear. This makes it possible for acousticians to match the TOPPERFO surface
treatment with the required absorption. The absorption coefficients stated in this brochure were measured according to the ISO 354 standard as
described above. Additional absorption coefficients with other porous materials in the air cavity (e.g. only fleece, melamine resin foam, fiberglass,
etc.) are listed in the TOPAKUSTIK / TOPPERFO sound absorption document (p. 23).
Total thickness 50 mm Total thickness 200 mm
4 air cavity
3 Mineral wool 30 mm (40-60 kg/m3; 2.5 – 3.75 pcf )
2 Acoustic fleece SP 60 laminated
1 TOPAKUSTIK element in 16 mm MDF
321
321
4
4
Measured according to ISO 354:
Prospektneu-E-03-04_lds 8.9.2006 8:22 Uhr Seite 12
< 12 13
1.2
1
0.8
0.6
0.4
0.2
0
100
160
250
400
630
1000
1600
2500
4000
1.2
1
0.8
0.6
0.4
0.2
0
100
160
250
400
630
1000
1600
2500
4000
16 12 3
TOPPERFO T 16/16/12-3
16
TOPPERFO T 16/16/12-4
16 12 4
16
16 12 5
TOPPERFO T 16/16/12-5
16
α sHz
α sHz
25 26
27 28
TOPPERFO T 16/16/12-3
16
(1
7)TOPPERFO T 16/16/12-4
16
(1
7)
TOPPERFO T 16/16/12-5
16
(1
7)
Core panel Fire category B2 (p. 16) Fire category B1 (p. 16) Fire category A2 (p. 16)
Panels maximum size maximum size maximum size maximum size maximum size maximum size maximum size maximum size
3648 x 1216 3648 x 1216 3648 x 1216 3648 x 1216 3648 x 1216 3648 x 1216 2976 x 992 2976 x 992
ideal: ideal: ideal: ideal: ideal: ideal: ideal: ideal:
2032 x 944 2032 x 944 2032 x 944 2032 x 944 2032 x 944 2032 x 944 2576 x 592 2576 x 592
2640 x 944 2640 x 944 2768 x 944 2640 x 944 2640 x 944 2768 x 944 2976 x 592 2976 x 592
3648 x 624 3648 x 624 3648 x 624 3648 x 624
TOPPERFO-T
ideal means optimal use of MDF core – custom lengths are also available Date 08/2006 – please check the current dimensions on www.topakustik.ch
25 Swiss Red Cross Meeting Room, Bern, Switzerland 26 Swisscom, Winterthur, Switzerland 27 Au-Langmatt Music School, Switzerland 28 Imax Theater, Berlin, Germany
200mm Total thickness50mm Total thickness
16/16/12 -3
16/16/12 -4
16/16/12 -5
The T-perforation developed and successfully
used by n’H Akustik + Design AG has a di-
screet effect, yet offers appreciable absorp-
tion.
TOPPERFO-T panels are available with perfo-
ration bores of � 3, 4 und 5 mm. Decreas-
ing the diameter of the visible perforations,
shifts the absorption maximum to lower
frequency.
200mm Total thickness50mm Total thickness
Surface Colors Natural wood eco Colors Natural wood eco Colors Natural woodThickness 16 mm 17 mm 16 mm 16 mm 17 mm 16 mm 16 mm 16 mm
Prospektneu-E-03-04_lds 8.9.2006 8:23 Uhr Seite 13
1.2
1
0.8
0.6
0.4
0.2
010
0
160
250
400
630
1000
1600
2500
4000
1.2
1
0.8
0.6
0.4
0.2
0
100
160
250
400
630
1000
1600
2500
4000
1.2
1
0.8
0.6
0.4
0.2
0
100
160
250
400
630
1000
1600
2500
4000
TOPPERFO M 16/16/6
16
616
816
16 TOPPERFO M 20/20/8
820
TOPPERFO M 20/20/8
20
820
α sHz
α sHz
α sHz
TOPPERFO M 16/16/61
6 (
17
)1
6 (
17
)
TOPPERFO M 20/20/8
16
(1
7)
TOPPERFO-M for walls, ceilings and doors
200mm50mm
29 School Marcelins, Morges, Switzerland 30 Primary School, Gebenstorf, Switzerland 31 Banco del Gotthardo, Switzerland 32 UBS Personalrestaurant Flurhof, Zürich, Switzerland
16/16/6
TOPPERFO-M are acoustic panels in their conven-
tional form in all materials and surfaces. Perfo-
ration-free edges and reduced perforations for
cut-outs are available as a client’s choice. Other
hole spacings and bore diameters are available
upon request.
Total thickness
200mm50mm
Total thickness
200mm50mm
Total thickness
16/16/6, 11%
16/16/8, 20%
20/20/8, 13%
Core panel Fire category B2 (p. 16) Fire category B1 (p. 16) Fire category A2 (p. 16)
Panels maximum size maximum size maximum size maximum size maximum size maximum size maximum size maximum size
3648 x 1216 3648 x 1216 3648 x 1216 3648 x 1216 3648 x 1216 3648 x 1216 2976 x 992 2976 x 992
ideal: ideal: ideal: ideal: ideal: ideal: ideal: ideal:
2032 x 944 2032 x 944 2032 x 944 2032 x 944 2032 x 944 2032 x 944 2576 x 592 2576 x 592
2640 x 944 2640 x 944 2768 x 944 2640 x 944 2640 x 944 2768 x 944 2976 x 592 2976 x 592
3648 x 624 3648 x 624 3648 x 624 3648 x 624
ideal means optimal use of MDF core – custom lengths are also available Date 08/2006 – please check the current dimensions on www.topakustik.ch
Surface Colors Natural wood eco Colors Natural wood eco Colors Natural woodThickness 16 mm 17 mm 16 mm 16 mm 17 mm 16 mm 16 mm 16 mm
29 30 32
33
31
Prospektneu-E-03-04_lds 8.9.2006 8:23 Uhr Seite 14
< 14 15
1.2
1
0.8
0.6
0.4
0.2
0
100
160
250
400
630
1000
1600
2500
4000
8
8
α sHz
8
8
TOPPERFO Clou for walls, ceilings and doors
The fine Clou perforation in an 8 mm grid with a diameter of only 1.2 mm can
hardly be seen at a distance. The wooden texture is therefore completely re-
tained in its natural beauty. TOPPERFO-Clou has excellent acoustic absorp-
tion coefficients in the low to middle frequency range. It is therefore ideally
suited for lecture rooms and auditoriums where low frequency control is
needed.
Acrylic absorber MPA
The micro-perforated absorbers (MPA) of artificial glass (thickness up to
5 mm) absorb sound without a mineral wool layer or fleece lamination, thus
permitting new design solutions. The MPA produced by n’H Akustik + Design
AG in coordination with Fraunhofer-Institut, Stuttgart (patent owner) excel
through high precision and a uniform perforation appearance.
200mm Total thickness50mm Total thickness
33 Lobby State House Chêne Bougeries, Switzerland 34 The Louvre, Paris, France 35 School CEC André-Chavanne, Geneva, Switzerland 36 Spa, Sarrow, Germany
Core panel Fire category B2 (p. 16) Fire category B1 (p. 16) Fire category A2 (p. 16)
Panels maximum size maximum size maximum size maximum size maximum size maximum size maximum size maximum size
3648 x 1216 3648 x 1216 3648 x 1216 3648 x 1216 3648 x 1216 3648 x 1216 2976 x 992 2976 x 992
ideal: ideal: ideal: ideal: ideal: ideal: ideal: ideal:
2032 x 944 2032 x 944 2032 x 944 2032 x 944 2032 x 944 2032 x 944 2576 x 592 2576 x 592
2640 x 944 2640 x 944 2768 x 944 2640 x 944 2640 x 944 2768 x 944 2976 x 592 2976 x 592
3648 x 624 3648 x 624 3648 x 624 3648 x 624
ideal means optimal use of MDF core – custom lengths are also available Date 08/2006– please check the current dimensions on www.topakustik.ch
Surface Colors Natural wood eco Colors Natural wood eco Colors Natural woodThickness 16 mm 17 mm 16 mm 16 mm 17 mm 16 mm 16 mm 16 mm
34 36
35
B2 and B1 quality
Panel max. 3030 x 1600
ideal:
2020 x 640 2720 x 640
2020 x 960 2720 x 960
2020 x 1280 2720 x 1280
Ø = 1.2 mm
Prospektneu-E-03-04_lds 8.9.2006 8:24 Uhr Seite 15
TOPAKUSTIK and TOPPERFO products are manufactured from medium density fiberboard
(MDF) as a standard. Thanks to the homogeneous structure, MDF is is well suited for this
application. MDF panels are produced from soft and hard wood fibers with added binding
agents. Only panels meeting the international emission values E1 are processed.
If there are flame spread and smoke developed requirements, special core panels are used:
B2 (according to DIN 4102) standard MDF panels
B1 (according to DIN 4102) fire retardant MDF panels
A2 (according to DIN 4102) non-flammable panels, plaster-bound chipboard
MDF E1-B2 B2(4.3) 2620 – + ~ + + 3660 x 2070 0.8 mm/1 m = 0.8%
4100 DIV
MDF E1-B1 B1(5.3) – + ~ + + 4100 5600 x 2070 1 mm/1 m = 1%
MDF E1 B2(4.3) + + ~ + – 2800 moisture resistant 5600 x 2070 1 mm/1 m = 1%
MDF E1 B2(4.3) – + ~ + � 4100 anthrazit 2620 x 2070 0.8 mm/1 m = 0.8%
MDF E1 B2(4.3) – + ~ + – 2500 x 1850 0.8 mm/1 m = 0.8%red, yellow, green
Gypsum A2(6.q3) – + – + – 26003000 x 1250 0.4 mm/1 m = 0.4%
Cement A2(6.q3) + – ~ � – 26003100 x 1250 0.8 mm/1 m = 0.8%
Particle board A2(6.q3) – + ~ + – 2560 3100 x 1250 0.4 mm/1 m = 0.4%
Particle board B2(4.3) – + ~ � + DIV 0.8 mm/1 m = 0.8%
Flakeboard OSB B2(4.3) + – + � – DIV 0.8 mm/1 m = 0.8%
Plywood B2(4.3) + + ~ � – DIV 0.8 mm/1 m = 0.8%
Core Materialdesignation
Firecategory
DIN (CH)
ecodecor
Suitablefor humidrooms
Veneered+natural varnish
Lacquered
natural color
Basic sizes of corematerials
Maximum expansion due to humidity in-crease for 1000 mmlength in air conditioned
Legend:– unsuited
+ well suited
� upon request
~ conditionally suited, take
differences in color in untreated
panels into account
DIV various further formats,
please inquire.
Core panels with natural varnishing: All the core panels are industrially
manufactured. Color differences, even within one production batch, cannot be avoided.
The application of the protective varnish can make these differences even more apparent.
Expansion and Contraction of the core materials: Wooden materials are hygroscopic and have a balancing effect on the relative humidity of the room. Changing room humidity also causes the
shrinkage and expansion of wooden materials.
In air conditioned rooms the panel and plank dimensions can change by +/- 1 mm per 1000 mm. In non air conditioned rooms this can increase to
+/- 2mm per 1000 mm. Therefore panels and planks should be separated with joints of 3mm to 6mm depending on their size. The installation should
only be made when the normal operating humidity and temperature conditions are present. After delivery and unloading the plastic transport covering
should be removed and the panels or planks left to acclimatize for 3-4 days prior to starting installation.
Overview of core material
Core materials
Important:
The formats stated above
refer to the untreated panel
formats. For the maximum
possible TOPAKUSTIK and
TOPPERFO formats, please
consult the dimension tables
for the various types.
For Example: Black MDF The MDF is black or colored throughout and offers many interesting possibilites. For example,
black or colored Topperfo contrasts well with wood veneer Topakustik planks or panels.
}}
}
}
}
}
}
Prospektneu-E-03-04_lds 8.9.2006 8:24 Uhr Seite 16
< 16 17
TOPAKUSTIK and TOPPERFO products are also available
in three attractive melamine coatings. All the necessary
information can be found in the dimension tables of the
various TOPAKUSTIK and TOPPERFO types.
eco plus collection: Further melamine finishes for
quantities above 150 m2 upon request.
HPL coating: All customary HPL coatings are possi-
ble. Contact factory for details.
Natural wood varnishes:The TOPAKUSTIK products are veneered in all customary types of wood. The varnishes are processed for each order in order to obtain the
most even appearance possible for color and pattern. Further, the veneer appearance is influenced by the cut and the composition of the
veneers. For example, TOPAKUSTIK planks are, as a rule, provided with the straightest and plainest rift veneers possible. For TOPAKUSTIK
and TOPPERFO panels, patterned veneers will be cut to match the width of the panels. Since wood is a natural product, the matching of the
veneer must be done in connection with each individual order.
Please note: Book matched quarter cut veneers may reflect light differently from neighbouring bands of veneer leaf. This may result in a
noticeable colour variation (light-dark stripe effect) in some species or fitches.
The illustrations below show types of wood frequently used for ceiling and wall coatings.
The lengths stated show you limitations with regard to the maximum lengths. Ideal lengths (with regard to a wider selection of veneers) are
shorter as a matter of principle. The illustrations cannot act as a reference, either for the color or for the patterning.
A standard or specified high-quality varnish is provided on all orders. Light kinds of wood such as maple or birch are varnished with a slight
lightening effect as a matter of principle.
NAM = natural, gloss varnish
AUM = lightening, gloss varnish
Finishes
Color varnishing according to RAL or NCS standardsAll colors shall be specified according to RAL or NCS standards. The application is done with the latest generation spray robotics, providing a
guaranteed even application. Due to the grooves and bores of the products, the color appearance is different from that on smooth surfaces. If
TOPAKUSTIK products are finished by the client, please remember that an even paint application, even in the grooves, is absolutely necessary
for a good final result.
WEM= white matte finish (Standard = RAL 9010)
FAM = colored matte finish
UNB = untreated
Beech Maple Oak Birch CherrySteamed light Europ. up to 4080 mm plain sliced up to 4080 mm Europ. up to 3650 mmup to 4080 mm Amer. up to 4080 mm up to 4080 mm rotary cut up to 3000 mm Amer. up to 4080 mm
151 G white 3590 G Maple 3589 G Beech
eco coating
Prospektneu-E-03-04_lds 8.9.2006 8:24 Uhr Seite 17
Kanten Paneele
sk
ap nf
nk
fk/mk
an
Kanten Paneele
sk
ap nf
nk
fk/mk
an
Kanten Paneele
sk
ap nf
nk
fk/mk
an
Kanten Paneele
sk
ap nf
nk
fk/mk
an
Haken
Riegelset
Kanten Paneele
sk
ap nf
nk
fk/mk
an
Kanten Paneele
sk
ap nf
nk
fk/mk
an
Riegelset
Haken
Typ 2
RandstäbeTyp 3 Typ 1
44
30
30
50
50
13
Longitudinal edges with tongue and groove
If requested with groove for fitting with
mounting clip.
Transverse edges are cut cleanly and at a
90 degree angle. When planks of multiple
lengths are requested, the perforations
are visible on the front edge.
If requested, perforations on the transver-
se edges are set back. Edge varnished.
The rear stress relief grooves are neces-
sary for stability and are visible.
If requested, the first and last plank may
have a visible edge without tongue or
groove. It may also be veneered and var-
nished.
Inserts:Inserts for lighting or other installations
can be added in multiples of 2 or 3
128 mm plank widths (256 or 384 mm).
These inserts are provided with tongue
and groove parallel to the planks and can
therefore be integrated into the TOP-
AKUSTIK system without problems.
Hooks:Ceiling and wall hooks are available for
pictures and other decorative objects.
They are load-bearing up to 3 kg (6.6 lbs)
for TOPAKUSTIK products with 3 or 4 mm
slots and up to about 2 kg (4.4 lbs) for
TOPAKUSTIK products with 2 mm grooves.
TOPAKUSTIK planksEdge details:
For blind edges, perforations are
visible
Visible edge, perforation set back
(Edge varnished in colored varnish version!)
4 mm tongue or groove joint
Female rabbet joint 4 mm deep for a
spline joint
Veneer edge 0.6 mm
Groove interrupted at edge
TOPAKUSTIK panelsEdge details:
The front edges of the TOPAKUSTIK planks are supplied with a clean 90 degree angle cut as a standard. The length tolerance amounts to +/– 2 mm.
If requested, the planks can be supplied to a "fixed” dimension with a reduced tolerance of approx. +/- 0.25mm per m1.
Please note: by grooving and perforating, the surface area is increased by a factor of two or three, depending upon the design. In variable room
humidity conditons, the dimensions can therefore change very quickly. (see p.16 – material expansion
Edge molding:
Type 1
Type 2
Type 3
Lock set for service panels:
Prospektneu-E-03-04_lds 8.9.2006 8:24 Uhr Seite 18
< 18 19
TOPAKUSTIK planks(For more information consult the TOPAKUSTIK assembly manual)
Mounting on wooden Battens: The TOPAKUSTIK planks are installed like conventional
tongue and groove strips. The important thing is that the compressed air pressure used for the nailing
or stapling gun is set precisely, so the staples do not protrude in the groove or penetrate too deeply.
Mounting on Metal Ceiling Grids: The TOPAKUSTIK plank is fitted to the suspended T-bar
rail with special mounting clips. This form of assembly is ideal for non-flammable ceiling finishes.
TOPAKUSTIK panels(For more information consult the TOPAKUSTIK assembly manual)
Z-System: Every other panel is inserted and can easily be removed by lifting. This system is sui-
table for all ceilings.
G-System: Each panel is easy to remove by lifting. This system is suited for panels up to about
500 mm in width.
Offset joints:The installation with offset joints permits a
slight material expansion without it beco-
ming visible. In combination with joint
widths of about 3 mm, a clear and tidy ap-
pearance of the joints result.
Horizontal Panel and Plank LayoutPanels Planks
Prospektneu-E-03-04_lds 8.9.2006 8:24 Uhr Seite 19
Formelemente r>2m
Formelemente
r>2m
Formed Shapes
For ceiling clouds, curved walls and other shapes TOPAKUSTIK
and TOPPERFO elements can be used for shaped wall and ceiling
finishes without significant additional effort. For radii above 10
meters, the TOPAKUSTIK planks are assembled on the round
sub-construction in a segmented way. For smaller radii, the
planks or panels can be made flexible by deeper relief grooving
on the rear side. In this way, the panels can simply be adapted
to the curved sub-construction. Radius > 3 m Radius > 8 m
37 Army Education Center Reception, Lucerne, Switzerland 38 Sudwestbank Office, Stuttgart, Germany 39 FFS Restaurant, Lugano, Switzerland 40 Multipurpose room, Kusnacht, Switzerland
Type SW cabinet doors: For even hig-
her sound absorption, the cabinet doors are
constructed as a sandwich with a sound-ab-
sorbing insert and with a perforated cover.
The perforated cover is also set back by the
dimension of the hinges and door knobs.
Duplex cupboard doors: These have
invisible, integrated absorptive panels sha-
ring the same absorptive values as the SW
model. Duplex is particularly suited to large
hinged or sliding doors.
Cabinet fronts
Cabinet fronts or rear walls of cabinets can be used ideally as sound absorbers.
The following products have particularly proven their usefulness: TOPAKUSTIK 14/2, 9/2, 6/2, TOPPERFO-T and Clou.
Type RK cabinet doors: In interaction
with the fleece attached to the inside (RK
280), the acoustic surface ensures an ab-
sorption across the entire frequency band.
The fleece developed by n’H is tear-proof
and set back from the hinges and door
knobs.
37 40
38
39
Prospektneu-E-03-04_lds 8.9.2006 8:24 Uhr Seite 20
< 20 21
Schwimmbäder
Sports halls
Wall and ceiling finishes are subjected to high impacts in sports halls. TOPAKUSTIK and TOPPERFO finishes, in combination with the sub-construc-
tion systems specifically developed for sports venues, fulfil the high requirements with regard to mechanical impact and room acoustics in an opti-
mal way.
Various TOPAKUSTIK and TOPPERFO products have been tested and certified to DIN 18 032 part 3 by the Otto-Graf Institute of Stuttgart University.
• Certificate 46/32676 Ball-throwing safety TOPAKUSTIK Typ 28/4
• Certificate 46/32677 Ball-throwing safety TOPAKUSTIK Typ 13/3
• Certificate 46/32678 Ball-throwing safety TOPPERFO Typ 16/16/8
• Certificate 46/32679 Impact wall test TOPAKUSTIK and TOPPERFO elements
Swimming pools
For acoustic finishes in high humidity rooms, requirements corresponding to the application are to be fulfilled, e.g.:
• Ceilings and walls constructed flawlessly as regards construction physics
• Rear ventilation of wall and ceiling finish
• Use of corrosion-proof sub-construction materials
• Use of specific, moisture-resistant core panels in production
• Use of specific varnishes or impregnations
• Consideration of the (extraordinary) shrinkage and swelling properties of the core panels
41a Spa Le Montreux Palace 41b Scool CEC André-Chavanne, Geneva 42 Munster Gymnasium, Switzerland 43 Gymnasium Deitingen, Switzerland 44 Ettiswil Gymnasium, Switzerland 45 Titlis Swimming Pool
41a
41b
42
43
44
45
Prospektneu-E-03-04_lds 8.9.2006 8:24 Uhr Seite 21
SwitzerlandAG: Schulen Au, Längmatt, Gebenstorf > Kino Elite, Wettingen > Altersheim Menziken > Musikschule Brugg > IRB Suhr > Rehaklinik Reinfelden BE: Naturhistorisches Museum, Bern > VerwaltungsgebäudeTitanic > SRK, Bern > Bärensaal Worb > Rest. Aareschlucht > Bakom Biel > Bellevue Palace Bern > Viktoria Jungfrau, Interlaken > Nestlé Konolfingen BL: «Gutsmatte», Liestal > International School, ReinachBS: Leonhard-Schulhaus, Basel > UBS Verwaltungsgebäude, Basel > Beyeler-Museum, Riehen > Dreifach-Turnhalle, Klybeck-Dreirosen, Basel > Tinguely-Museum, Basel > Volta Schulhaus, Basel > Stadion St.Jakob FL: Kastanienhof Süd, Vaduz > Gemeinde Eschen > Schwefel Bar Vaduz FR: Home IMC Ursy et salle polyv.Promasens > Schule Ueberstorf > Cremo Fribourg GE: CERN Bâtiment des physiciens > ESCPetit Sacconex > Rolex SA, Thônex > Ecole Grand-Sacconex > Ecole de la Fontaine, Chambésy > Salle Comunale Chêne Bougeries > .B CEC André-Chavanne, Genève > Bibliotheca Bodmeriana GR: WaffenplatzSt. Luzisteig > Graubündner Kantonalbank, St. Moritz > Kultursaal, Falera LU: Kultur- + Kongresszentrum, Luzern > AAL, Luzern > Schweiz. Hotelfachschule, Luzern > MZH Hildisrieden > Schloss Wyher> Titlis, Rathausen > MZH Ettiswil > Schulhaus Grossfeld, Kriens > MZH Horw > Altersheim Sempach > SUVA Root > Altersheim Sunneziel, Meggen > Vici, Schenkon NE: Ecole les Accacias, Neuchâtel >ETMN Le Locle > Centre Dürrenmatt NW: Nidwaldner Kantonalbank, Stans > Hotel Engel, Stans > Gemeindehaus Ennetmoos OW: Verwaltungsgebäude Zeughaus, Sarnen > Maxon Motor AG, Sachseln >Restaurant Engel, Engelberg > von Ah Druckerei, Sarnen SG: Pfalzkeller, Regierungsgeb. St. Gallen > Suva St. Gallen > Schule Mariaberg (Aula), Rorschach SO: Breitling, Grenchen > SoBa Solothurn > MZADeitingen > Kultur- + Sportanlagen «Seemättli», Liesberg SZ: Bezirkschule Obermarch, Buttikon > Gemeindeverwaltung Wollerau TG: Bildungszentrum Lilienberg «Pavillon», Ermatingen > Kantonsschule Kreuz-lingen > Oberstufenschulanlage Sandbänkli, Bischofszell TI: Centro sportivo Nazionale della Gioventu > U.F.E.F.A. Centro d’istruzione Militare > OSG Bellinzona > SWISSCOM Bellinzona > RTSI Studio 5, Lugano> Piazza d’Armi, Losone > Rist. FFS, Lugano > UBS Chiasso > Sala del Gran Consiglio, Bellinzona > Ospedale, Faido UR: Schulhaus Bernarda, Altdorf > Gotthard-Raststätte, Satellit, Erstfeld VD: UBS, Vevey> EPSIC Lausanne > Banque cantonale vaudoise > CPNVD Yverdon-les-Bains > Medtronic Europe SA, Tolochenaz > Ecole Marcelin, Morges > Hôtel Palace, Montreux VS: SUVA/CNA Sion > Bibliotheque Monthey> Turnhalle Münster > Schule Zermatt ZG: GIBZ, Zug > Alterswohnheim Mütschi, Walchwil > Shell, Baar > Dreifachturnhalle, Unterägeri > Restaurant Gottschalkenberg, Raten ZH: ETH Hönggerberg > MZA,Heslibach, Küsnacht > UBS Talbot > UBS Flurhof > Swisscom Winterthur > Banco del Gottardo, Zürich > Zürcher Kammerorchester > MGB am Limmatplatz, Zürich
Other CountriesGermany: Augsburg: Finanzgericht Berlin: Bundesrat, ehem. «Preuss. Herrenhaus» > Bundeskanzleramt > Reichstag > Schule und Sporthalle Gatow > Auswärtiges Amt > Sony Cinemax Potsdamer Platz >Württ. Landesvertretung > SFB Haus des Rundfunks Berlin Berlin-Schönefeld: Schwimmhalle Biberach: Volksbank > Boehringer Bitterfeld: Berufsschulzentrum Coburg: HUK Cottbus: Stadthalle Dresden: Landgericht > Offiziersschule Dresden > Sächsische Landesbibliothek Dresden Düsseldorf: Deutsche Apotheker- und Aerztebank Düsseldorf Erfurt: Bundesarbeitsgericht Feuchtwangen: SpielbankFrankfurt: Eurotower Frankfurt/Oder: Kleist Kongress- und Kulturzentrum Frickingen: Rathaus Hamburg: Geschäftshaus Neuer Wall 30 Herford: Gemeindezentrum Ilsenburg: Kongresszentrum Karlsruhe: Kran-kenhaus Bad Cannstatt München: Französische Schule Rottweil: Kreissparkasse Sarow: Therme Bad Sarow Sindelfingen: Daimler Chrysler Stuttgart: Südwestbank Thüringen: MDR Weimar: Kongresszen-trum Weimarhalle > Kombibad Weimar Wiesbaden: DePfa Bank Wolfsburg: Autostadt VW – Werksforum Würzburg: Universität > Landesfinanzrechenzentrum France: 06 Palais du Festival de Cannes >13 Théâtre d’Arles > 17 Encan La Rochelle > 19 Musée Président Chirac > 33 CNRS > 34 Université de Montpellier > 35 IRTS Rennes > Groupama Rennes > 38 Palais de Justice Grenoble > 43 Conseil GénéralLe Puv en Velay > 44 LCPC Nantes > 45 Groupama Orléans > 53 Hôtel Dpt Laval > 56 Sofitel Quiberon > 59 Kursaal Dunkerque > Chambre de Commerce Lille > 65 Parvis de Tarbes > 67 Gymnase Haguenau> 68 Hôtel Dpt Colmar > 73 Cité de la Musique Chambéry > 75 Ernst Young > Danone > Collège de France > C.E.A – Bloomberg > Banque Transatlantique > Banque NSMD > Banque de France > AXE Fran-ce > AXA > AGF > Assemblée Nationale > Le Louvre > Renault Champs Elysées > M7 Rive gauche > Hermés > LVMH > Austerlitz Rive gauche > Suez > 78 Lycée Hoche Versailles > Archives Dpt des Yveli-nes > Gymnase Chaville > 83 Bibliothèque Campus La Garde > 92 Renault RVI > Tours la Défense: Cœur Défense, Triangle de l’Arche, Adria, CB 16 > Piscine d’Asnières > L’Oréal Clichy > 93 L’Oréal Aulnay >Aéroport de Roissy > ZAC le Landy > 94 RATP Neuilly Plaisance > Nestlé Maroc: Millénium Casablanca > Bibliothèque d’Assilah Österreich: Landessportschule Dornbirn > Rathaus Schwaz > Raiffeisen-Landesbank, Innsbruck Italia: MAX MARA, Reggio Emilia Milano > Nuovo Centro Congressi Pinerolo, Torino > Novartis Origlio, Varese > A.B.B. Sesto San Giovanni, Milano > Biblioteca "A. Tiraboschi”, Berga-mo > UNI Bozen, Bolzano > IL SOLE 24 ORE, Milano > San Pedro Pio S. Giovanni Rotondo, Foggia > Riva Acciai / ILVA spa, Milano Greece: Banca Nazionale di Grecia, Atene Benelux: Living Tomorrow, Vilvo-orde > De Lijn, Nieuwpoort > Bayer, Port à Antwerpen > Volvo Trucks, Brussel > ACV – Plettinckxstraat, Brussel > SD Works, Antwerpen > Inst. Vlerickx Gent > Vlaamse Milieumaatschoppij, Aalst > SD Works,Kortrijk England: Milton Keynes Theatre > Tate Gallery of Modern Art, London > Electronic Arts, Surrey > Millenium Dome > Greater London Council HQ Building, London > Canary Wharf Docklands ShoppingCentre, London > UK Treasury Building, London > Cambridge University > Oxford University > British Broacasting Corporation, Birmingham > Royal Bank of Scotland, Doncaster > Liverpool University > Imperi-al College of Science and Technology, London > Cambourne District Council HQ Building > American Community School, Cobham > Royal Society, London USA: XM Satellite Radio, Washington DC > Siebel Cen-ter for Computer Science, Urbana IL > Exxon Mobile Conference Center, Houston TX > Denison University, Granville OH > Canyon School, Santa Monica CA > Bellevue Athletic Club Indoor Pool, Bellevue WA >Alcon Labs, Fort Worth, TX > Alcoa Business Service Center, Pittsburgh PA > Milton Academy, Boston MA > St. Martin of Tours Church, Vicksburg MI > Instituto Cervantes, New York NY > Farmingdale HighSchool, Long Island NY Hong Kong and China Region: Bank of China Headquarter, Peijing, > Chinese University of Hong Kong > Kowloon City Magistracy Building > Macau Tower > Macao Water Company> Nam Cheong Street Lab. Centre > Lok Ma Chau Crossing Boundary > West Kowloon Primary School > HK Polytechnic University - Student Hostel > Science Park Taiwan: Still Thoughts Hall, Tzu Chi FoundationSouth Korea: Sejong Center for the Performing Arts, Seoul > Hannam Museum, Seoul > Acrovista, Seoul > Kyobo Kangnam Tower, Seoul > Seongnam Art Center, Seongnam > Sungkyul University Auditorium,Anyang > Sookmyung Woman’s University Concert Hall, Seoul > Korea University Auditorium, Seoul > Jeil Church, Busan > Saeronam Church, Daejeon
46 Wyher, Ettiswil 47 UBS Lobby, Chiasso 48 Pfarreiheim, Kusnacht 49 Tinguely Museum, Basel 50 Sächsische Landesbibliothek, Dresden 51 Weimarhalle, Weimar 52 KKL, Lucerne
References
46 49
47
48
50 52
51
for more project references please visit www.topakustik.ch
Prospektneu-E-03-04_lds 8.9.2006 8:25 Uhr Seite 22
< 22 23
n’H Service
n’H Akustik + Design AG supports you from planning to installation and provides you with extensive support material:
TOPAKUSTIK installation manual with sub-constructions, guidelines and tips for the tried and tested
TOPAKUSTIK installation systems. For specific installation solutions, please contact our technical service.
TOPAKUSTIK/TOPPERFO absorption coefficients. More than 80 different measured absorption coeffi-
cients according to ISO 354. For example, only with acoustic fleece and without mineral wool or other total installa-
tion thicknesses in addition to the 50 and 200 mm in this brochure.
Sample box basic: TOPAKUSTIK samples in original plank width: 13/3 M in maple, Fineline in gray, 12/4 HR in
blue. In addition, the TOPPERFO-T in 16/16/12-3 in beech.
Sample box eco: Original TOPAKUSTIK in melamine facing: 13/3 M and 28/4 M in beech decor, 14/2 M in
maple decor, 9/2 M in white.
Individual samples at your choice
More than 100 different TOPAKUSTIK and TOPPERFO samples in steamed beech, maple, birch and surfaces as well
as white (RAL 9010) are available to you from stock. Please request the list of samples.
TOPAKUSTIK plank box
contains 2 samples of your choice in a total size of 297 x 256 mm.
TOPPERFO sample
contains 1 TOPPERFO 297 x 210 mm sample of your choice.
WE SHALL BE PLEASED TO PRODUCE SPECIAL SAMPLES AND PROJECT MOCK UPS
ACCORDING TO YOUR WISHES WITHIN 2 WEEKS (THESE MAY ALSO BE REFUNDABLE
AGAINST ANY SUBSEQUENT ORDER).
Sample box Deluxe: 12 different TOPAKUSTIK and TOPPERFO samples in various types of
wood and color (e.g. maple, pine, beech, ash, birch). This extensive collection of samples can
only be sent at an extra charge.
... or visit us in Lungern
30 minutes from Lucerne
Prospektneu-E-03-04_lds 8.9.2006 8:25 Uhr Seite 23
Please call us for technical Information,
samples and prices !
<
Acoustic Products Limited
48 Oxford Street
Whitstable
CT5 1DG
Tel: 01227 281140
Fax: 01227 281141
www.acoustic-products.co.uk
www.topakustik.co.uk
08
/2
00
6
Rückseiten_E3-04_lds 5.9.2006 7:53 Uhr Seite 4