newsletter october 2016 - asd-stan.org · newsletter – october 2016 ... the status of...
TRANSCRIPT
Newsletter – October 2016
To contact ASD-STAN and make suggestions regarding the Publication Notice E-mail: [email protected] Telephone: +32 2 775 81 26 - Fax: +32 2 775 81 31
Brussels, 31/10/2016
General News from the Director
Dear Readers of our Newsletter,
In October 2016, ASD-STAN has published 18 new documents, out of which we want to
highlight the importance of the following documents: prENs 9101 P8, prEN 9110 P5, prEN
9120 P5, prEN 4681-005 P2, prEN 4681-006 P2 and prEN 3719 P4, which are available in
our website for purchase. In the next pages you can have more information about our
new publications and new projects for this month.
Additionally, in order to improve our engagement with the public, we have decided to let
our customers or anyone working in the aerospace industry to provide their opinion for the possible improvement
of our standards.
Thank you and enjoy the read!
With the best regards,
Andreas Jain
Director ASD-STAN
Feedback?
If you have some comments or remarks on the prENs or ENs produced by ASD-STAN, please let us
know by sending us an email to [email protected]. We will forward your comments to the
Working Group in charge of this particular standard and make sure they will take into account your
remarks for an eventual revision of the standard or any new proposal.
Newsletter– October 2016 2/13
To contact ASD-STAN and make suggestions regarding the Publication Notice E-mail: [email protected] Telephone: +32 2 775 81 26 - Fax: +32 2 775 81 31
Chairman of ASD EAQG DOA Think Tank Mr. Patrick LE GUIRRIEC:
The ASD DOA Think Tank is producing technical guidelines to become means of
compliance with EASA requirements aiming at simplifying the interface between
DOA (Design organisation Approval) holders and their suppliers.
The standardisation as a prerequisite to the recognition of our work should be
diligent, intelligent and reactive. This ASD-STAN process is complex and has
much length to the ballot and publication process.
ASD-STAN should give more accent on the quality of the technical content than on the dressing, but
nevertheless keeping it as an essential parameter of quality because such documents are often written
by non-professionals.
A big effort has been done in 2016 by the ASD-STAN community that should be pursued in 2017 to bring the
necessary credibility to the activity knowing that more and more industry standards are being published to
support the EASA suite of requirements.
The status of standardisation of DOA Think Tank guidelines is being presented at EASA DOA and product
certification workshop in Cologne 22nd November.
I thank all ASD-STAN experts and managers who help us to progress the DOA work with professionalism and
dedication from the beginning of our working together.
Our common achievement as a premiere in DOA history is the publication of the first standard as prEN 9250
in May 2016. Six other DOA standards will follow in 2017.
Newsletter– October 2016 3/13
To contact ASD-STAN and make suggestions regarding the Publication Notice E-mail: [email protected] Telephone: +32 2 775 81 26 - Fax: +32 2 775 81 31
Important news:
In October 2016, ASD-
STAN has published 18
prENs, out of which we
want to highlight the
importance of the
following documents:
9100 Quality series-see
the following column
for more information;
prEN 4681-005 P2,
prEN 4681-006 P2,
prEN 3719 P4, which
are available in our
website for purchase.
Quality Series
standards: prENs 9101,
prEN 9110 and prEN
9120 published in
October and are
available in our website;
use the below links for
more information and
purchase
prEN 9101 P8 HERE
prEN 9110 P5 HERE
prEN 9120 P5 HERE
Requests for the
network license:
If you wish to have a
network license to use
the document/s
inside your
organization please
send the request to
our sales department
here
The Core Quality standards prEN 9101, prEN 9110 and prEN 9120
(2016) have been published in October and are available in our
website!!!
Newsletter– October 2016 4/13
To contact ASD-STAN and make suggestions regarding the Publication Notice E-mail: [email protected] Telephone: +32 2 775 81 26 - Fax: +32 2 775 81 31
ASD-STAN FULL Document Index can be found HERE
Add me to your Document Monthly Digest distribution list
To Subscribe to Individual New Document Alerts click HERE
To view all the previous Newsletter please click HERE
Newsletter– October 2016 5/13
To contact ASD-STAN and make suggestions regarding the Publication Notice E-mail: [email protected] Telephone: +32 2 775 81 26 - Fax: +32 2 775 81 31
"Breaking News:
One of the most interesting innovations in aeronautics is the rapidly growing development of
Unmanned Aircraft Systems UAS. ASD-STAN (D1WG4) is actively working on new standards that
make this technology safe and available for global commercial and industrial use.
In order to support the safe operation of these systems also in rural areas we have started an
initiative for new regulations. The existing "Geo-Fencing" - avoidance of no-fly-zones - is not enough
to secure a safe traffic in those areas. Therefore we have started the navigation support "Geo-
Guiding". This can be described as "roads in the skies".
Autonomously flying systems need to follow these Geo-Guides. In order to enforce such regulations
the UAS need to be identified, similar to the number plate of a car. In the UAS case such identification
shall be a transmitted digital code which contains all necessary information to trace the UAS to its
operator.
The Chinese standardization organization CAPE will work together closely with DIN NL. We want to
establish such coding which will be internationally recognized.
On October 28, 2016 there was a conference at CAPE in Beijing where Bill Holler (ASD-STAN TA
Chairman) could achieve a common agreement to cooperate on this matter. Since most of the
hardware and basic components are being developed in China, our cooperation will have a strong
effect on the future worldwide market."
Bill Holler ASD-STAN Technical Authority Chairman
Newsletter– October 2016 6/13
To contact ASD-STAN and make suggestions regarding the Publication Notice E-mail: [email protected] Telephone: +32 2 775 81 26 - Fax: +32 2 775 81 31
2016
173 New Work Proposals (stage 00.00)
185 New Work Proposal Ballots (stage 10.00)
70 Published prENs (stage 40.00)
63 Documents sent for Formal Vote (stage 50.00)
47 Ratified EN (stage 60.00)
2015
84 New Work Proposals (stage 00.00)
84 New Work Proposal Ballots (stage 10.00)
80 Published prENs (stage 40.00)
95 Documents Sent for Formal Vote (stage 50.00)
115 Ratified EN (stage 60.00)
2014
94 New Work Proposals (stage 00.00)
78 New Work Proposal Ballots (stage 10.00)
120 Published prENs (stage 40.00)
99 Documents Sent for Formal Vote (stage 50.00)
60 Ratified EN (stage 60.00)
0
20
40
60
80
100
120
140
160
180
200
NWP (stage00.00)
NWP Ballots(stage 10.00)
Published prEN(stage 40.00)
Formal Vote(stage 50.00)
Ratified EN(stage 60.00)
173 185
70 63 47
84 84 80 95
115
94 78
129
99
60
2016
2015
2014
Newsletter– October 2016 7/13
To contact ASD-STAN and make suggestions regarding the Publication Notice E-mail: [email protected] Telephone: +32 2 775 81 26 - Fax: +32 2 775 81 31
Now available at the ASD-STAN Web-shop (http://www.asd-stan.org/online-document-store/)
These prEN/TR standards are replacing any previous prEN/TR editions with the same
number. They will supersede any previous EN editions (if any) with the same number after the CEN
Formal Vote procedure.
Type Domain Number Ed Title Pages Date
prEN ELEC 3646-003 P2
Aerospace series — Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C
continuous — Part 003: Receptacle, square flange mounting — Product standard
7 01/10/16
prEN ELEC 3719 P4 Aerospace series - Aluminium or aluminium alloy
conductors for electrical cables - Product standard 7 01/10/16
prEN ELEC 4681-005 P2
Aerospace series — Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium — Part 005: AZ family, single, for use in low pressure atmosphere
— Product standard
9 01/10/16
prEN ELEC 4681-006 P2
Aerospace series — Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium — Part 006: AZA family, single and multicore assembly, for use in
low pressure atmosphere — Product standard
9 01/10/16
prEN ELEC 3745-505 P2 Aerospace series - Fibres and cables, optical, aircraft use -
Test methods - Part 505: Cable tensile strength 4 01/10/16
prEN MAT 2566 P2 Aerospace series — Fluorocarbon rubber (FPM) - Hardness
70 IRHD 5 01/10/16
prEN MAT 2567 P2 Aerospace series — Fluorocarbon rubber (FPM) - Hardness
80 IRHD 5 01/10/16
prEN MAT 2568 P2 Aerospace series — Fluorocarbon rubber (FPM) - Hardness
90 IRHD 5 01/10/16
prEN MAT 2795 P2 Aerospace series — Fluorocarbon rubber (FPM) - Low
compression set - Hardness 50 IRHD 5 01/10/16
prEN MAT 2796 P2 Aerospace series — Fluorocarbon rubber (FPM) - Low
compression set - Hardness 60 IRHD 5 01/10/16
prEN MAT 2797 P2 Aerospace series — Fluorocarbon rubber (FPM) - Low
compression set - Hardness 70 IRHD 5 01/10/16
prEN MAT 2798 P2 Aerospace series — Fluorocarbon rubber (FPM) - Low
compression set - Hardness 80 IRHD 5 01/10/16
prEN MAT 2799 P2 Aerospace series — Fluorocarbon rubber (FPM) - Low
compression set - Hardness 90 IRHD 5 01/10/16
Newsletter– October 2016 8/13
To contact ASD-STAN and make suggestions regarding the Publication Notice E-mail: [email protected] Telephone: +32 2 775 81 26 - Fax: +32 2 775 81 31
prEN MAT 2899 P2 Aerospace series — Vulcanized rubbers - Test on the
susceptibility to corrosion in a damp atmosphere of metals in contact with vulcanized rubbers
8 01/10/16
prEN MAT 4842 P1
Aerospace series — X5CrNiCu15-5 (1.4545) — Consumable electrode remelted (ESR or VAR) — Solution
treated and precipitation treated (H1025) — Bar for machining — a or D ≤ 250 mm — 1 070 MPa ≤ Rm ≤ 1 200
MPa — Premium quality (pq)
6 01/10/16
prEN QUAL 9101 P8 Quality Management Systems - Audit Requirements for
Aviation, Space, and Defense Organizations 29 01/10/16
prEN QUAL 9110 P5 Quality Management Systems – Requirements for Aviation
Maintenance Organizations 59 01/10/16
prEN QUAL 9120 P5 Quality Management Systems – Requirements for Aviation,
Space and Defence Distributors 58 01/10/16
18 prEN published
Publication Notice – October 2016
Please feel free to contact your national focal points to have your opinion included. If you need the contact details, please visit the key-contacts webpage: www.asd-stan.org/key_contacts.html or contact us directly at [email protected] .
These EN standards are replacing any previous prEN/EN editions with the same
number.
Type Domain Number Ed Title Pages Date
0 EN Published
Publication Notice – October 2016
Please feel free to contact your national focal points to have your opinion included. If you need the contact details, please visit the key-contacts webpage: www.asd-stan.org/key_contacts.html or contact us directly at [email protected] .
Ballots reminder
NWP: New Work Proposal Ballot
Number Domain
Edition Title Due Date
4400-4 MAT P1 Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical Specification - Part 4: Aluminium and aluminium alloy tube
19/11/2016
4400-7 MAT P1 Aerospace series - Aluminium and aluminium- and magnesium- alloy products - Technical specification - Part 7: Aluminium alloy forgings
19/11/2016
4677-001 MAT P4 Aerospace series - Welded and brazed assemblies for aerospace construction - Joints of metallic materials by electron beam welding - Part
001: Quality of welded assemblies
19/11/2016
2267-010 ELEC P4 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 010: DR family, single
UV laser printable – Product standard
19/11/2016
4604-007
ELEC P5 Aerospace series - Cable, electrical, for signal transmission - Part 007: Cable, coaxial, 50 Ohms, 200 °C, type WN - Product standard
19/11/2016
Publication Notice – October 2016
Please feel free to contact your national focal points to have your opinion included. If you need the contact details, please visit the key-contacts webpage: www.asd-stan.org/key_contacts.html or contact us directly at [email protected] .
NDB : National Domain Ballot
Number Domain Edition Title Due Date
3155-017 ELEC P2 Electrical contacts used in elements of connection - Part 017: Contacts, electrical, relay base, female, type A, crimp, class P - Product standard
22/12/2016
3155-018 ELEC P4 Electrical contacts used in elements of connection - Part 018: Contacts, electrical, male 018, type A, crimp, class S - Product standard
22/12/2016
3155-019 ELEC P4 Aerospace series - Electrical contacts used in elements of connection - Part 019: Contacts, electrical, female, type A, crimp, class S - Product
standard
22/12/2016
3155-003 ELEC P4 Aerospace series - Electrical contacts used in elements of connection - Part 003: Contacts, electrical, female, type A, crimp, class S - Product
standard
22/12/2016
3155-009 ELEC P4 Aerospace series - Electrical contacts used in elements of connection - Part 009: Contacts, electrical, female, type A, crimp, class S - Product
standard
22/12/2016
3155-065 ELEC P4 Aerospace series - Electrical contacts used in elements of connection - Part 065: Contacts, electrical, male, type A, crimp, class S, size 8 Product
standard
5/01/2017
3155-083 ELEC P2 Aerospace series — Electrical contacts used in elements of connection — Part 083: Contact, electrical, female, type A, crimp, class S, size 8 —
Product standard
5/01/2017
3155-026 ELEC P4 Aerospace series - Electrical contacts used in elements of connection - Part 026: Contacts, electrical, male, type A, crimp, class R - Product
standard
5/01/2017
3155-027 ELEC P4 Aerospace series - Electrical contacts used in elements of connection - Part 027: Contacts, electrical, female, type A, crimp, class R - Product
standard
5/01/2017
3155-076 ELEC P2 Aerospace series - Electrical contacts used in elements of connection - Part 076: Contacts, electrical, male, type A, crimp, class R - Product
standard
5/01/2017
3155-077 ELEC P2 Aerospace series - Electrical contacts used in elements of connection - Part 077: Contacts, electrical, female, type A, crimp, class R - Product
standard
5/01/2017
3155-016 ELEC P4 Aerospace series - Electrical contacts used in elements of connection - Part 016: Contacts, electrical, male, type A, crimp, class S - Product
standard
12/01/2017
3155-070 ELEC P3 Aerospace series - Electrical contacts used in elements of connection - Part 070: Contacts, electrical, male, type A, crimp, class S - Product
standard
12/01/2017
3155-071 ELEC P3 Aerospace series - Electrical contacts used in elements of connection - Part 071: Contacts, electrical, female, type A, crimp, class S - Product
standard
12/01/2017
Publication Notice – October 2016
Please feel free to contact your national focal points to have your opinion included. If you need the contact details, please visit the key-contacts webpage: www.asd-stan.org/key_contacts.html or contact us directly at [email protected] .
3155-075 ELEC P3 Aerospace series - Electrical contacts used in elements of connection - Part 075: Contacts, electrical, quadrax, size 8, female, type E, crimp,
class R - Product standard
12/01/2017
3155-024 ELEC P3 Aerospace series - Electrical contacts used in elements of connection - Part 024: Contacts, electrical, triaxial, size 8, male, type D, crimp, class S
- Product standard
12/01/2017
3155-025 ELEC P3 Aerospace series - Electrical contacts used in elements of connection - Part 025: Contacts, electrical, triaxial, size 8, female, type D, crimp, class
S - Product standard
12/01/2017
3155-044 ELEC P2 Electrical contacts used in elements of connection - Part 044: Contacts, electrical, male 044, type A, double crimping, class T - Product standard
19/01/2017
3155-045 ELEC P3 Aerospace series - Electrical contacts used in elements of connection - Part 045: Contacts, electrical, female, type A, double crimping, class T -
Product standard
19/01/2017
3155-054 ELEC P2 Electrical contacts used in elements of connection - Part 054: Contacts, electrical, male, thermocouple NiAl, type C, crimp, class T - Product
standard
19/01/2017
3155-055 ELEC P2 Electrical contacts used in elements of connection - Part 055: Contacts, electrical, female, thermocouple NiAl, type C, crimp, class T - Product
standard
19/01/2017
3155-056 ELEC P2 Electrical contacts used in elements of connection - Part 056: Contacts, electrical, male, thermocouple NiCr, type C, crimp, class T - Product
standard
19/01/2017
3155-057 ELEC P2 Electrical contacts used in elements of connection - Part 057: Contacts, electrical, female, thermocouple NiCr, type C, crimp, class T - Product
standard
19/01/2017
3155-014 ELEC P5 Aerospace series - Electrical contacts used in elements of connection - Part 014: Contacts, electrical, male, type A, crimp, class S - Product
standard
26/01/2017
3155-015 ELEC P5 Aerospace series - Electrical contacts used in elements of connection - Part 015: Contacts, electrical, female, type A, crimp, class S - Product
standard
26/01/2017
3155-078 ELEC P2 Aerospace series — Electrical contacts used in elements of connection — Part 078: Contacts size 22 for EN 2997, electrical, male, type A, crimp,
class S — Product standard
26/01/2017
3155-079 ELEC P2 Aerospace series — Electrical contacts used in elements of connection — Part 079: Contacts size 22 for EN 2997, electrical, female, type A, crimp,
class S — Product standard
26/01/2017
3155-080 ELEC P2 Aerospace series — Electrical contacts used in elements of connection — Part 080: Contacts size 22 for EN 2997, electrical, male, type A, crimp,
class T — Product standard
26/01/2017
3155-081 ELEC P2 Aerospace series — Electrical contacts used in elements of connection — Part 081: Contacts size 22 for EN 2997, electrical, female, type A, crimp,
class T — Product standard
26/01/2017
3155-082 ELEC P2 Aerospace series — Electrical contacts used in elements of connection — Part 082: Contacts, electrical, female, type A, crimp, class S — Product
standard
26/01/2017
Publication Notice – October 2016
Please feel free to contact your national focal points to have your opinion included. If you need the contact details, please visit the key-contacts webpage: www.asd-stan.org/key_contacts.html or contact us directly at [email protected] .
4840-101 ELEC P1 Aerospace series - Heat shrinkable moulded shapes - Part 101: polyolefin, semi-rigid, limited fire hazard, temperature range -30 to 105ºC
31/01/2017
4840-002 ELEC P1 Aerospace series - Heat shrinkable moulded shapes - Part 002: Index of product standards and product dimensions
31/01/2017