newsbook 2016 / 2017 - english
TRANSCRIPT
Newsbook 2016 / 2017Automation Technology
3
Inductive sensors
Encoders
Position sensors
Inductive sensors take a leap forwardKplus sensors: one sensing range for all metals
(11.2016)
(04.2016)
6 - 7 8 - 9
Infrared sensors / red light sensors
This tiny new photocell O8 is the next big thing (11.2016)
Ingeniously simple: display guide for the perfect setting
Capacitive sensors
(11.2016) 10 - 11
Very robust position sensors with 1 mm-thick metal face
Cylinder sensors
(04.2016) 12 - 13
18 - 19
Ultrasonic sensors
Precise object detection under extreme conditionsObject detection for long ranges and difficult surfaces
(04.2016)
(04.2016)
14 - 15 16 - 17
Intelligent incremental encoder with display and IO-Link (04.2016)
Sensors for motion control
28 - 29
Robust speed sensors – also with ATEX approval
Speed sensors
(04.2016) 30 - 31
Decentralised display, preprocessing and conversion of analogue signalsMultifunctional display: speed, time, counter
Systems for pulse evaluation
(11.2016)
(11.2016)
32 - 33 34 - 35
TOP
TOP
TOP
TOP
TOP
TOP
Laser sensors / distance measurement sensors
The next step in photoelectric sensing with distance displayThe next step in photoelectric sensing with easy setting
(11.2016)
(11.2016)
20 - 21 22 - 23
Valve feedback systems for rising stem valves and quarter-turn actuators
Valve feedback sensor with easy wiringFeedback for hand valves
(11.2016)
(11.2016)
24 - 25 26 - 27
TOP
Camera systems for mobile machines
Augmented reality: mobile 3D smart camera with overlay functionMobile 3D camera – 2D and 3D in one unit
(11.2016)
(11.2016)
Industrial imaging
36 - 37 38 - 39 TOP
TOP
4
Pressure sensors
AS-Interface cable extensions
Process sensors
Pressure transmitters with DEUTSCH, AMP or M12 connector for mobile applicationsHydrostatic level measurement for a wide range of applicationsNew PT absolute pressure transmitter with different measuring rangesIO-Link display: process values at a glance
(04.2016)
(04.2016)
(04.2016)
(04.2016)
48 - 49 50 - 51 52 - 53 54 - 55
Calorimetric flow meter for liquids and gases
Flow sensors / flow meters
(04.2016) 56 - 57
Temperature sensors
Two temperature sensors in oneTemperature sensor with easy dial settingTN sensor with integrated process connection and evaluation electronicsTemperature sensors with DEUTSCH, AMP or M12 connector
(11.2016)
(11.2016)
(04.2016)
(04.2016)
Repeater to extend AS-i networks up to 1000 m (04.2016)
Industrial communication
SafeLine SmartPLC: fail-safe automation system
AS-Interface Safety at Work
(11.2016)
4-port IO-Link master: intelligent connection of sensorsLR DEVICE Parameter setting software via IO-Link masterLR SENSOR Parameter setting software, point-to-point, for IO-Link devices
IO-Link components
(11.2016)
(11.2016)
(11.2016)
AS-Interface controllers / gateways
DataLine SmartPLC: flexible automation system (11.2016)
TOP
TOP
TOP
TOP
TOP
Camera systems for mobile machines
True 3D vision sensor with intelligent functions3D sensors for mobile machinesMultiViewBox: display up to 4 camera images on one screen
(04.2016
(04.2016
(11.2016)
Industrial imaging
40 - 41 42 - 43 44 - 45
Photoelectric 3D level measurement and point level detection
3D sensors
(11.2016) 46 - 47 TOP
58 - 59 60 - 61 62 - 63 64 - 65
68 - 69
70 - 71
72 - 73 74 - 75 76 - 77
66 - 67
5
RFID 125 kHz / RFID 13.56 MHz
RFID evaluation system DTE with EtherCAT (04.2016)
Identification systems
RFID with CANopen or J1939 interface for mobile machines
RFID 13.56 MHz
(04.2016)
Diagnostic and service units
Real-time clock with CAN interfaceCANwireless: wifi and Bluetooth for the CAN bus
(11.2016)
(11.2016)
Systems for mobile machines
Sockets
Always a reliable connection. ecolink M12 – even for special applicationsecolink M12 cables reduce voltage dropecolink M12 – the secure connection even in difficult applications
(11.2016)
(11.2016)
(11.2016)
Connection technology
T splitters
ecolink M12 – T splitters for difficult applications (11.2016)
24 V DC switched-mode power supplies
Powerful switched-mode power supply with an enormous power reserve (04.2016)
Power supplies
Accessories
Circuit protection with monitoring function for the 24 V secondary circuit (04.2016)
Splitter boxes
Compact low-profile M8 splitters with secure ecolink connection (11.2016)
78 - 79
80 - 81
82 - 83 84 - 85
86 - 87 88 - 89 90 - 91
94 - 95
96 - 97
98 - 99
92 - 93
6
Position sensors
Inductive sensorstake a leap forward
Inductive sensors
Precise position monitoring
Digital transmission of targetdistance
High linearity and repeatability
High IP 69K and wide temperature range
Function and polarity selectablevia IO-Link
Much more than just a pulse pick-up!ifm’s new inductive sensors with IO-Link incorporate several functions inone unit. They can be used as switching sensors with an adjustable switchpoint or measuring systems with a measured value transmitted via IO-Link.The output signal can be set to NC or NO and PNP or NPN allowing manypossible combinations. This keeps the number of different types down, reducing the cost of stock.
Highest precisionThe new sensors are so precise that they detect even minute changes. Eventhe true run of a spindle or the tension of a saw blade is reliably detected.An alarm can be set if the target leaves the detection zone or comes tooclose to the sensing face. All data acquired can be transmitted via IO-Linkand recorded. This new development is unbeatable.
7
(11.2016)
Detectionzone[mm]
Housingmaterial
f
[Hz]
Orderno.
M12 connector· 3-wire DC
InstallationType Dimensions
[mm]
Operating voltage [V DC] 10...30
Electrical design DC PNP / NPN can be setvia IO-Link
Output functionNormally open / normally closed
can be set via IO-Link
Current rating [mA] 100
Reverse polarity protection •
Short-circuit protection •
Protection class III
Switching status indication [LED] yellow
IO-Link
V1.1; COM2; 3 ms cycle time;
smart sensor profiles; single point mode; two point mode; window mode
Further technical data
Connection technology
Type Description Orderno.
Socket, M12,2 m black, PUR cable EVC001
Socket, M12,5 m black, PUR cable EVC002
Socket, M12,2 m black, PUR cable EVC004
Socket, M12,5 m black, PUR cable EVC005
For further technical details please visit: www.ifm.com
60 0.375...3.75 coated brass600 IF6123M12
M12
M18
M18
Rectangular
Rectangular
60 0.7...7 coated brass600 IF6124
60 0.75...7.5 coated brass300 IG6615
60 1.3...13
flush
non flush
flush
non flush
coated brass300 IG6616
M30
M30
65 1.3...13 coated brass100 II5973
65 2.3...23
flush
non flush
coated brass100 II5974
40 x 40 2.1...21 PA100 IM5172
40 x 40 2.6...26 PA100 IM5173
flush
non flush
Ambient temperature
[°C]
-40...85
-40...85
-40...85
-40...85
-40...85
-40...85
-25...80
-25...80
Protection rating
IP 65, IP 66, IP 67,IP 68, IP 69K
IP 65, IP 66, IP 67,IP 68, IP 69K
IP 65, IP 66, IP 67,IP 68, IP 69K
IP 65, IP 66, IP 67,IP 68, IP 69K
IP 65, IP 66, IP 67,IP 68, IP 69K
IP 65, IP 66, IP 67,IP 68, IP 69K
IP 67
IP 67
Dimensions
Example IF6124
Example IG6616
Example II5974
Type Description Orderno.
Accessories
Angle bracket for type M30,stainless steel E10737
Mounting clamp, with end stop for types M12, PC E11994
Mounting clamp, with end stop for types M18, PC E11995
Mounting clamp, with end stop for types M30, PC E11996
Angle bracket for type M12,stainless steel E10735
Angle bracket for type M18,stainless steel E10736
4940
M12
x1
174
M12
x1
60
LED 4 x 90°
5
M18
x1
35 10
M12
x1
60
LED 4 x 90°
49
244
53
34
M30
x1,5
5
52
65
M12
x1
LED 4 x 90°
15
36
8
Inductive sensors
Kplus sensors: one sensing rangefor all metals
Uniform sensing range for thereliable detection of all metals
Compact dimensions for use inthe smallest of space
Electromagnetic field immunesensor technology to preventincorrect switching
High-quality stainless steel housing
High reliability thanks to protection rating from IP 65 / IP 69K
Constant correction factorKplus sensors have the same sensing range for all types of metals. They are for example perfectly suited for the detection of aluminium, where conventional sensors show a considerably reduced sensing range. The high switching frequencies enable the monitoring of fast changingswitching states.The resistant stainless steel sleeve allows reliable use in oil and coolant applications. The wide temperature range as well as the high protection ratings enable universal use of the new Kplus sensors.
Position sensors
9
(04.2016)
Sensing range
[mm]
Current rating
[mA]
Switching frequency
[Hz]
Orderno.
M12 connector · 3 wire DC PNP · Output function normally open
InstallationType Total length
[mm]
Further technical dataConnection technology
Type Description Orderno.
3430
M12
x1
4
M12
x1
45
LED 4 x 90°17
417LED 4 x 90°
3549
60
M12
x1
M12
x1
10
M18
x1
M12
x1
30
4534
4LED 4 x 90° 24
M18
x1
30 15
M12
x1
60
LED 4 x 90°
49
244
453430
LED 4 x 90°
M12
x1
M30
x1,5
536
4960
22,5
M30
x1,5
M12
x1
LED 4 x 90° 5 36
22,5
45 4 1002000 IFS297M12
M12
M12
M12
M18
M18
45 8 1002000 IFS298
45 10 1002000 IFS299
60 4 1002000 IFS304
M12
M12
60 8 1002000 IFS305
60 10 1002000 IFS306
45 8 1002000 IGS287
45 12 1002000 IGS288
M18
M18
45 15 1002000 IGS289
60 8 1002000 IGS290
M18
M18
60 12 1002000 IGS291
60 15 1002000 IGS292
M30
M30
45 15 1002000 IIS281
60 15 1002000 IIS282
M30 60 22 1002000 IIS283
M30 60 30 1002000 IIS284
flush
non-flush
non-flush
flush
non-flush
non-flush
flush
non-flush
non-flush
flush
non-flush
non-flush
flush
flush
non-flush
non-flush
Operating voltage [V DC] 10...30
Reverse polarity protection •
Short-circuit protection •
Overload protection •
Protection rating IP 65 / IP 66 / IP 67 / IP 68 / IP 69K
Protection class III
Ambient temperature [°C] -40...85
Output status indication [LED] yellow (4 x 90°)
Socket, M12,2 m black, PUR cable EVC001
Socket, M12,5 m black, PUR cable EVC002
Socket, M12,2 m black, PUR cable EVC004
Socket, M12,5 m black, PUR cable EVC005
For further technical details please visit: www.ifm.com
Housing materials
High-grade stainless steel(316L)
sensing face LCP
Dimensions
Example IFS297
Example IFS306
Example IGS287
Example IGS292
Example IIS281
Example IIS284
10
Position sensors
Ingeniously simple: display guide for the perfect setting
Capacitive sensors
Unique visualisation and handling concept via LED display
See and compensate switchpoint movement
IP 69K gives high ingress resistance
PNP/ NPN, NO/ NC, timerfunction
For medium temperatures up to 110 °C
Visualised switch pointThe new capacitive sensors stand out not only because of their excellenttechnical data but most of all with their new and unique visualisation concept. Using a 12-LED bar display of the PerformanceLine the user canalways adapt the switch point to suit the application conditions – it is always in the centre of the display. The green LEDs either side of the switchpoint indicate the reliability of the switch point. Deposits, material changesetc. are displayed directly on the sensor and the user can readjust theswitch point precisely as needed. An imminent error can be detected ingood time and avoided thus minimising the risk of failures or deactivation.If help is needed with the effects of process changes this is much easier to explain and rectify with the LED display. Over the phone the user candescribe the LED behaviour and a support engineer can easily advise corrective measures.
11
(11.2016)
Further technical data
PerfomanceLine · M12 connector ·3 wires
StandardLine · connection cable 2 m PUR· 3 wires
Type Description Orderno.
Mounting accessories
Type Description Orderno.
Operating voltage [V DC] 10...30
Short-circuit protection •
Reverse polarity / overload protection • / •
Ambient temperature [°C] -25...80
Mounting clamp with end stop for M18 types E11048
Mounting clamp with end stop for M30 types E11049
Fixing clamp with reducing bush for M18 types E10076
Fixing clamp with reducing bush for M30 types E10077
Mounting adapter for M30 types,G 1 1/1", POM E11033
Mounting adapter for M30 types,G 1 1/4", PVDF
Switching frequency [HZ] 40
Medium temperature [°C] -25...110
Housing material PBT
Type Output stage Sensing range
[mm]
Protection rating/protection class
Orderno.
Setting range
[mm]
Communicationinterface
For further technical details please visit: www.ifm.com
Memory plug, parameter memoryfor IO-Link sensors E30398
LINERECORDER SENSOR,software for parameter setting and setting up IO-Link sensors
QA0001
IO-Link master with Profibus interface AL1010
IO-Link master with EtherNet/IP interface AL1020
USB IO-Link master for parameter settingand analysis of unitsSupported communication protocols: IO-Link (4.8, 38.4 and 230 kBits/s)
E30390
M30 PNP, NO/NC 25 nf IP 65, IP 67, IP 69K / III KI60000.5...40
M30 NPN, NO 25 nf IP 65, IP 67, IP 69K / III KI5300
M30 PNP, NC 25 nf IP 65, IP 67, IP 69K / III KI5301
0.5...40
0.5...40
IO-Link COM 2
IO-Link COM 2
M30 NPN, NC 25 nf IP 65, IP 67, IP 69K / III KI5302
M30 PNP, NO 25 nf IP 65, IP 67, IP 69K / III KI5303
0.5...40
0.5...40
IO-Link COM 2
IO-Link COM 2
M30 PNP, NC 15 qf IP 65, IP 67, IP 69K / III KI5304
M30 PNP, NO 15 qf IP 65, IP 67, IP 69K / III KI5305
0.5...24
0.5...24
IO-Link COM 2
IO-Link COM 2
M30 NPN, NO 25 nf IP 65, IP 67, IP 69K / III KI5306
M30 PNP, NC 25 nf IP 65, IP 67, IP 69K / III KI5307
0.5...40
0.5...40
IO-Link COM 2
IO-Link COM 2
M30 NPN, NO 25 nf IP 65, IP 67, IP 69K / III KI5308
M30 PNP, NO 25 nf IP 65, IP 67, IP 69K / III KI5309
0.5...40
0.5...40
IO-Link COM 2
IO-Link COM 2
M30 PNP, NC 15 qf IP 65, IP 67, IP 69K / III KI5310
M30 PNP, NO 15 qf IP 65, IP 67, IP 69K / III KI5311
0.5...24
0.5...24
IO-Link COM 2
IO-Link COM 2
M18 NPN, NO 15 nf IP 65, IP 67, IP 69K / III KG5306
M18 PNP, NC 15 nf IP 65, IP 67, IP 69K / III KG5307
0.5...30
0.5...30
IO-Link COM 2
IO-Link COM 2
M18 NPN, NO 15 nf IP 65, IP 67, IP 69K / III KG5308
M18 PNP, NO 15 nf IP 65, IP 67, IP 69K / III KG5309
0.5...30
0.5...30
IO-Link COM 2
IO-Link COM 2
M18 PNP, NC 8 qf IP 65, IP 67, IP 69K / III KG5310
M18 PNP, NO 8 qf IP 65, IP 67, IP 69K / III KG5311
0.5...9
0.5...9
IO-Link COM 2
IO-Link COM 2
IO-Link COM 2
M18 PNP, NO/NC 15 nf IP 65, IP 67, IP 69K / III KG60000.5...30 IO-Link COM 2
Mounting adapter for M18 types,G 3/4", POM E43900
Mounting adapter for M18 types,G 1", PVDF E43904
IO-Link accessories
StandardLine · M12 connector ·3 wires
12
Position sensors
Very robust position sensorswith 1 mm-thickmetal faceCylinder sensors
Extremely pressure resistantwith over 10 million pressurecycles
Best value performer
Complementary outputprovides higher operationalreliability
Standard M12 housing with ingress-resistant cable entry
Short housing (40 mm) forextremely low-profile cylinders
Function principleThe new MFH series sensor is suited for flush mounting in various steels.With its 1.8 mm sensing range it shows reliable switching characteristics.The new operating principle of this unit is based on a magnetic-inductivetechnology that detects only ferromagnetic metals (e.g. steel). It is sealedby means of an O-ring and a supporting ring towards the pressure area.
Applications Besides use in hydraulic cylinders, the sensor is also ideal for other hydrauliccomponents such as valves or pumps. MFH operates reliably for the lifetimeof the cylinder. Furthermore, it is used in mechanical engineering processes,e.g. in plastic injection-moulding or process industry applications.Its attractive price means the sensor can also be considered for simplecomponents where this option used to be too expensive.
13
(04.2016)
For further technical details please visit: www.ifm.com
M12
x1
101824,8
417
M12
x19,
7
7,8
60
Connection technology
Type Description Orderno.
M12 socket,2 m black, PUR cable, LED EVC644
Y splitter, ”OR“M12 connector / 2x M12 socket EBC117
Y splitter, ”AND“,M12 connector / 2x M12 socket EBC118
Type Sensingrange[mm]
Housinglength[mm]
LED OutputAmbienttemperature
[°C]
Orderno.
Cable connection
M12 1.8 f40 • PNP, NO-25...85 MFH205
M12 1.8 f40 • NPN NO-25...85 MFH206
M12 1.8 f40 • PNP, NC-25...85 MFH207
M12 1.8 f40 • PNP, NO/NC-25...85 MFH208
M12 1.8 f60 – PNP, NO/NC-25...120 MFH209
Operating voltage [V] 10...36 DC
Current rating [mA] 200
Switching frequency [Hz] 1000
Short-circuit protection, pulsed •
Protected against reverse polarity / overload protected • / •
Operating pressure [bar] 500
Pressure rating , static [bar] 1000
Burst pressure [bar] 2000
Protection rating, protection class
IP 65 / IP 68 / IP 69K,III
Housing material stainless steel 1.4404
Common technical data
Accessories
Type Description Orderno.
Optical particle monitor LDP100
Seal process connection,set 5 O-rings + 5 supporting rings E12451
Switched-mode power supply 24 V DC / 5 A, metal housing DN4012
Dimensions
Example MFH205
MFH209
Wiring
M12 connector, complementary
M12 socket,2 m black, PUR cable EVC001
MFH205 MFH209
101820
417
M12
x19,
7
7,8
40
BN
BK
BU
L+
L4
L
L+1
2
32:4:
14
Position sensors
Precise object detectionunder extreme conditionsUltrasonic sensors
Robust high-grade stainlesssteel housing for demandingapplications
Sensing range up to 1.2 m inM18 cube design and 2.2 m in M18 design
The vibrating sound transducerreduces the deposit of dirt
Retro-reflective operation fororientation-independent objectdetection
Easy setting via teach button,wire teach or IO-Link
The alternative for difficult surfacesUltrasonic sensors transmit and receive sound waves in the ultrasonicrange. The object to be detected reflects the sound waves and the distanceinformation is determined via time of flight measurement. As opposed tophotoelectric sensors, colour, transparency or the object’s surface shine donot play a role. Blister packages in packaging technology or transparentplastic bowls in the food industry, for example, can be reliably detected.
High performanceThe ifm ultrasonic sensors in M18 design provide a particularly small blindzone and long sensing ranges which are usually only achieved by sensors ofa considerably larger design.The sensors operate reliably with heavy soiling so that they can be used inapplications in which photoelectric sensors meet their limits.
15
(04.2016)
For further technical details please visit: www.ifm.com
Ultrasonic diffuse-reflection sensor · 3-wire DC, 4-pole
Housing length/dimensions
[mm]
Setting
60
Type
Wire
Orderno.
UGT500
300 mm*
Orderno.
UGT503
800 mm*
Orderno.
UGT506
1200 mm*
Orderno.
–
1600 mm*
* Max. range
Output
PNP
60 Wire UGT501 UGT504 UGT507 –4...20 mA
60 Wire UGT502 UGT505 UGT508 –0...10 V
Ultrasonic diffuse-reflection sensor · 3-wire DC, 4-pole
53 x 20 x 38 Pushbutton UGT580
300 mm*
UGT582
800 mm*
UGT584
1200 mm*
–
1600 mm*
PNP + 4…20 mA
53 x 20 x 38 Pushbutton UGT581 UGT583 UGT585 –PNP + 0…10 V
53 x 20 x 38 Pushbutton UGT586 UGT588 UGT590 –NPN + 4…20 mA
53 x 20 x 38 Pushbutton UGT587 UGT589 UGT591 –NPN + 0…10 V
Ultrasonic diffuse-reflection sensor · 3-wire DC, 4-pole
98 Pushbutton, IO-Link –
300 mm*
–
800 mm*
–
1200 mm*
UGT509
1600 mm*
2 x PNP
98
98
98
98
98
Pushbutton, IO-Link – – –
– – –
– – –
– – –
– – –
UGT510PNP + 4…20 mA
Pushbutton, IO-Link UGT511PNP + 0…10 V
Pushbutton UGT5152x NPN
Pushbutton UGT516NPN + 4…20 mA
Pushbutton UGT517NPN + 0…10 V
Ultrasonic retro-reflective sensor · 3-wire DC, 3-pole
98
M18
M18
M18
M18 Cube
M18 Cube
M18 Cube
M18 Cube
M18
M18
M18
M18
M18
M18
M18 Pushbutton, IO-Link –
300 mm*
–
800 mm*
–
1200 mm*
UGR500
1600 mm*
Orderno.
–
2200 mm*
–
–
–
2200 mm*
–
–
–
UGT512
2200 mm*
UGT513
UGT514
UGT518
UGT519
UGT520
UGR501
2200 mm*
PNP
Accessories
Type Description Orderno.
Mounting set for clamp mounting, diecast zinc, Ø 12 mm E20720
Mounting set for clamp mounting, stainless steel, Ø 12 mm E21206
Mounting set for clamp mounting, diecast zinc, Ø 12 mm E20721
Mounting set for clamp mounting, stainless steel, Ø 12 mm E21207
Rod, 100 mm, Ø 12 mm, M10 thread, stainless steel E20938
Rod, 200 mm, Ø 10 mm, M10 thread, stainless steel E20940
Cube for mounting on an aluminiumprofile, M10 thread, diecast zinc E20951
Common technical data
Operating voltage [V DC] 10...30
Temperature compensation •
Operating temperature range [°C] -20...70
Current rating [mA]Switching output 100
Protection IP 67
Echo LED green
Status indications LED yellow
Connection M12 connector
Connection technology
Type Description Orderno.
Socket, M12, 4-pole2 m orange, PVC cable
Socket, M12, 4-pole5 m orange, PVC cable
Socket, M12, 4-pole2 m black, PUR cable
Socket, M12, 4-pole5 m black, PUR cable
Socket, M12, 4-pole2 m black, PUR cable
Socket, M12, 4-pole5 m black, PUR cable
60 Wire UGT521 UGT522 UGT523 –NPNM18 –
98M18 Pushbutton – – – UGR502 UGR503NPN
EVT064
EVT001
EVC001
EVC002
EVC004
EVC005
16
Position sensors
Object detectionfor long ranges anddifficult surfaces
Ultrasonic sensors
M18 plastic housing available in the two lengths 60 mm and98 mm
Long ranges from 300 mm to2200 mm available
The vibrating sound transducerreduces the deposit of dirt
Digital and analogue output for point level measurement and distance detection
Easy setting via teach button,wire teach or IO-Link
The alternative for difficult surfacesUltrasonic sensors transmit and receive sound waves in the ultrasonicrange. The object to be detected reflects the sound waves and the distanceinformation is determined via time of flight measurement. As opposed tophotoelectric sensors colour, transparency or the object’s surface shine donot play a role. Blister packages in packaging technology or transparentplastic bowls in the food industry, for example, can be reliably detected.
High performanceThe ifm ultrasonic sensors in M18 design provide a particularly small blindzone and long sensing ranges which are usually only achieved by sensors of a considerably larger design.The sensors operate reliably with heavy soiling so that they can be used inapplications in which photoelectric sensors meet their limits.
17
(04.2016)
For further technical details please visit: www.ifm.com
Ultrasonic diffuse-reflection sensor · 3-wire DC, 4-pole
Housing length/dimensions
[mm]
Setting
60
Type
Wire
Orderno.
300 mm*
Orderno.
800 mm*
Orderno.
1200 mm*
Orderno.
–
1600 mm*
* Max. range
Output
PNP
Ultrasonic diffuse-reflection sensor · 3-wire DC, 4-pole
98 Pushbutton, IO-Link –
300 mm*
–
800 mm*
–
1200 mm* 1600 mm*
2 x PNP
98
98
Pushbutton, IO-Link – – –
– – –
PNP + 4…20 mA
Pushbutton, IO-Link PNP + 0…10 V
M18
M18
M18
M18
Orderno.
–
2200 mm*
2200 mm*
Accessories
Type Description Orderno.
Mounting set for clamp mounting, diecast zinc, Ø 12 mm E20720
Mounting set for clamp mounting, stainless steel, Ø 12 mm E21206
Mounting set for clamp mounting, diecast zinc, Ø 12 mm E20721
Mounting set for clamp mounting, stainless steel, Ø 12 mm E21207
Rod, 100 mm, Ø 12 mm, M10 thread, stainless steel E20938
Rod, 200 mm, Ø 10 mm, M10 thread, stainless steel E20940
Cube for mounting on an aluminiumprofile, M10 thread, diecast zinc E20951
Common technical data
Operating voltage [V DC] 10...30
Temperature compensation •
Operating temperature range [°C] -20...70
Current rating [mA]Switching output 100
Protection IP 67
Echo LED green
Status indications LED yellow
Connection M12 connector
Connection technology
Type Description Orderno.
Socket, M12, 4-pole2 m black, PUR cable EVC001
Socket, M12, 4-pole5 m black, PUR cable EVC002
Socket, M12, 4-pole2 m black, PUR cable EVC004
Socket, M12, 4-pole5 m black, PUR cable EVC005
L+
L3
4
2
1
Wiring
Example UGT204
UGT200 UGT201 UGT202
UGT203
UGT204
UGT205
UGT206
UGT207
UGT208
60 Wire UGT209 UGT210 UGT211 –NPNM18 –
18
Position sensors
This tiny new photocell O8 is thenext big thing!
Infrared sensors / red light sensors
Extremely reliable background suppression
Range up to 80 mm independent of the colour
Precise detection of very small components
Reliable detection of dark orshiny surfaces
IO-Link for remote setting
Photoelectric miniature sensor with maximum precisionThe new powerful O8 sensor is an optimum choice for applications wherespace is at a premium such as assembly and robotics. It might be small, butthe sensor achieves a range of 80 mm independent of colour and finish of the surface to be detected. Moreover the background suppression is extremely reliable and precise even for the detection of very small, flat orreflective objects. The O8 reliably copes even with constantly changingbackgrounds, e.g. on robot arms.
Reliable and efficient thanks to IO-LinkVia IO-Link the ranges can be set to the nearest millimetre. A complex adjustment of the distance from the sensor to the object is not needed. The new sensors are also available with preset ranges. With their reliabilityand precision they are much above the average of conventional devices.
19
(11.2016)
For further technical details please visit: www.ifm.com
Diffuse reflection sensor with background suppression · 3 wires DC
Range
[mm]
Spot Ø at max. range
[mm]
15
Type
[H, W, D]
4
Orderno.
O8H200
PNPIO-Link 1.1
Connection Orderno.
O8H201
15 4 O8H202
2 m, PVC cable
0.3 m PVC cable / M8 connector, 3 poles O8H203
15 4 O8H204 O8H205
30 4 O8H206
0.3 m PVC cable / M8 connector, 4 poles
2 m, PVC cable O8H207
30 4 O8H208 O8H209
30 4 O8H210
0.3 m PVC cable / M8 connector, 3 poles
0.3 m PVC cable / M8 connector, 4 poles O8H211
50 4 O8H212 O8H213
50 4 O8H214
2 m, PVC cable
0.3 m PVC cable / M8 connector, 3 poles O8H215
50 4 O8H216 O8H217
80 4.5 O8H218
0.3 m PVC cable / M8 connector, 4 poles
2 m, PVC cable O8H219
80 4.5 O8H220 O8H221
80 4.5 O8H222
0.3 m PVC cable / M8 connector, 3 poles
0.3 m PVC cable / M8 connector, 4 poles O8H223
NPN
Accessories
Type Description Orderno.
Angle bracket for free-standing mounting, quick mounting, stainless steel E21289
Common technical data
Operating voltage [V DC] 10...30
Switching frequency [Hz] 1000
Protection rating, protection class
IP65 / IP67III
Type of light / wave length red light, 633 mm
OutputH = light-on / D = dark-on mode H
Switching status indication LED yellow
Voltage drop [V] < 2.5
Short-circuit protection, pulsed •
Reverse polarity / overload protection • / •
Ambient temperature [°C] -25...60
Materials housing lens
ABS; SUS316LPMMA
Current rating [mA] 100
Operation LED green
Connection technology
Type Description Orderno.
Socket, M8, 4 poles2 m black, PUR cable EVC150
Socket, M8, 4 poles5 m black, PUR cable EVC151
Socket, M8, 3 poles2 m black, PUR cable EVC141
Socket, M8, 3 poles5 m black, PUR cable EVC142
Socket, M8, 4 poles,2 m orange, PVC cable EVT134
Socket, M8, 4 poles,5 m orange, PVC cable EVT135
8,1
8,8
5,5
28,1
M3
14,412,1
133
3,5
2 x LED
Dimensions
Example O8H200
Angle bracket for free-standing mounting, stainless steel E21291
Rectangular28.1 x 8.1 x
14.4 mm
20
Position sensors
The next step in photoelectric sensingwith distance display
Laser sensors / distance measurement sensors
Reliable background suppression even at 2 m
Detects any surface finish or colour
Not fooled by hi-vis
Remote setting via IO-Link adds many options
New improved performance
Time of flight technology as standard sensorThe O5D with time of flight technology (PMD = Photonic Mixer Device)combines the following advantages: long range, reliable background suppression, visible laser light and high excess gain. In the same price rangeas standard sensors, it is a clever alternative.
Easy handlingThe switch point is set easily to the nearest centimetre via ”+/-“ buttonsand display or alternatively via IO-Link, allowing read-out of the actual value.
Any surface and mounting positionPolished, matt, dark or light objects of any colour: the O5D features reliablebackground suppression. The unit allows any angle of incidence and thusflexibility of mounting. This simplifies installation and saves costs.
21
(11.2016)
For further technical details please visit: www.ifm.com
Common technical data
Operating voltage [V DC] 10...30
Current consumption [mA] < 75
Switching frequency [Hz] 11
Dimensions [mm] 56 x 18.2 x 46.5
Type of light visible laser light 650 nm
Extraneous light on the object [klx] max. 10
Switching status indication LED yellow
Operation LED green
Distance value3-digit
alphanumeric display
Protection rating, protection class
IP 65, IP 67III
Short-circuit protection, pulsed •
Reverse polarity / overload protection • / •
Ambient temperature [°C] -25...60
Current rating [mA] 2 x 100
Output function OUT1: NOOUT2: NC
Connection technology
Type Description Orderno.
Socket, M12,2 m black, PUR cable EVC001
Socket, M12,5 m black, PUR cable EVC002
Socket, M12,2 m black, PUR cable EVC004
Socket, M12,5 m black, PUR cable EVC005
Photoelectric distance sensor · M12 connector, complementary
30...2000 ...20 PNP < 2.5* < 5 O5D101
30...2000 ...20 O5D100PNP < 2.5* < 5 cm
inch
Material housing / connector front pane / LED window bezel control panel
PAPMMA
stainless steelTPU
Accessories
Type Description Orderno.
Mounting bracket for rod,complete set incl. clamp E21083
Protective bracket for rod,complete set incl. clamp E21084
Bracket for free-standing mounting E21087
Cube for mounting on an aluminiumprofile, M10 thread, diecast zinc E20951
Measuringrange[mm]
Backgroundsuppression
[m]
Output Hysteresis
[%]
Spot Ø atmax. range
[mm]
Orderno.
Unit of measurement
Laserprotection class
2
2
Memory plug, parameter memoryfor IO-Link sensors E30398
IO-Link interface, current consumptionfrom USB port E30396
LINERECORDER SENSOR,software for parameter setting and setting up IO-Link sensors
QA0001
* at max. range
Hysteresis (example O5D100)
500 1000 1500 200000
25
50
75
100
125
150
175
200
y
x
1.
2.
30...2000 ...20 O5D102NPN < 2.5* < 5 cm2
30...2000 ...20 O5D150PNP < 4* < 5 cm1
30...2000 ...20 O5D151PNP < 4* < 5 inch1
x: distance in [mm], y: hysteresis in [mm]1. Background black (6 % remission)2. Background white (90 % remission)
22
Position sensors
The next step in photoelectric sensingwith easy setting
Laser sensors / distance measurement sensors
Dial switching distance – done!
Reliable background suppression even at 2 m
Detects any surface finish or colour
Not fooled by hi-vis
IO-Link adds many options
New improved performance
Time of flight technology as standard sensorThe OID with time of flight technology (PMD = Photonic Mixer Device)combines the following advantages: long range, reliable background suppression, visible laser light and high excess gain. In the same price rangeas standard sensors, it is a clever alternative.
Easy handlingThe switch point can be set easily by turning the setting ring (easy turn). A scale shows the distance set. The switch point can thus be set before installation. As an alternative the version without setting ring features thehigh protection rating IP69 K.
Any surface and mounting positionReliable detection of polished, matt, dark or light objects independent of the colour. The unit allows any angle of incidence and thus flexibility ofmounting. This simplifies installation and saves costs.
23
(11.2016)
For further technical details please visit: www.ifm.com
Photoelectric distance sensor · M12 connector, complementary
30...2000 ...20 PNP < 2* IP 65, IP 67
30...2000 ...20 PNP < 2* IP 65, IP 67 cm / inch
cm
Measuringrange[mm]
Backgroundsuppression
[m]
Output Hysteresis
[%]
Protection rating
Orderno.
Unit of measurement
Laserprotection
class
2
2
30...2000 ...20 PNP < 2* IP 65, IP 67, IP 69K cm / inch2
30...2000 ...20 NPN < 2* IP 65, IP 67 cm2
30...2000 ...20 PNP < 4* IP 65, IP 67 cm / inch1
30...2000 ...20 PNP < 4* IP 65, IP 67 cm1
30...2000 ...20 PNP < 4*
•
•
Setting ring
–
•
•
•
– IP 65, IP 67, IP 69K cm / inch1
Current consumption [mA] < 75
Switching frequency [Hz] 11
Common technical data
Operating voltage [V DC] 10...30
Dimensions M30 x 90 mm
Type of light visible laser light 650 nm
Spot Ø at max. [mm]range < 5
Extraneous light on the object [klx] max. 10
Switching status indication LED yellow
Operation LED green
Short-circuit protection, pulsed •
Reverse polarity / overload protection • / •
Ambient temperature [°C] -25...60
Current rating [mA] 2 x 100
Output function OUT1: NOOUT2: NC
Material housing
front pane
stainless steel, PBT, PC, FPM
PMMA
Hysteresis (example OID200)
500 1000 1500 200000
25
50
75
100
125
150
175
200
y
x
1.2.
x: distance in [mm], y: hysteresis in [mm]1. Background black (6 % remission)2. Background white (90 % remission)
Connection technology
Type Description Orderno.
Socket, M12,2 m black, PUR cable EVC001
Socket, M12,5 m black, PUR cable EVC002
Socket, M12,2 m black, PUR cable EVC004
Socket, M12,5 m black, PUR cable EVC005
Type Description Orderno.
Accessories
Angle bracket for type M30,stainless steel E10737
Mounting clamp for types M30, PTB E10077
Mounting clamp, with end stop for types M30, PC E11049
Memory plug, parameter memoryfor IO-Link sensors E30398
IO-Link interface, current consumptionfrom USB port E30396
LINERECORDER SENSOR,software for parameter setting and setting up IO-Link sensors
QA0001
* at max. range
OID201
OID200
OID204
OID202
OID250
OID251
OID254
24
Position sensors
Valve feedback sensor with easy wiring
Valve feedback systems for rising stemvalves and quarter-turn actuators
Heavy-duty housing for long life
Integrated solenoid wiring
Lasered label can be read evenwhen wet
Clearly visible status indication
Spacious terminal chamber foreasy access
End position feedback on quarter-turn actuatorsThe unit contains two inductive sensors in a potted and sturdy housingwith protection rating IP 67. It signals two end positions. It is equipped witha solenoid connection replacing the additional cable to the solenoid valve.
Fast and easy wiringThe actuator interface is optionally equipped with a standardised M20 x 1gland. The spacious terminal chamber allows quick and easy wiring. Sincethe terminal block can be removed, no new wiring is required if the sensoris replaced.A UL approval for this product is currently in progress.
25
(11.2016)
For further technical details please visit: www.ifm.com
Ambienttemperature
[°C]
Protection Orderno.
Terminal chamber
20…250 AC/DC -25...70 IP65 / IP67, II IN01312 x M20 x 1.5
Outputfunction
2 x normally open
ConnectionSensor / valve
Ub
[V]
Switching frequency [Hz] 25 AC / 50 DC
Sensing range [mm] 4
Electrical design AC/DC
Housing material PA
Minimum load current [mA] 5
Further technical dataDimensions
33
92
6,3
18,8
60
7,5
5,5
3060M
20x1
,5
1) Sensor 12) Sensor 23) LED OUT 24) LED OUT 1
4
6
7
8
5 IN +
IN -
OUT +
OUT -
3 A1
1
2L1 / L+
A2
2 A
Wiring diagram
Leakage current [mA]< 2.5 (250 V AC),< 1.3 (110 V AC),< 0.8 (24 V DC)
Current rating [mA](Duration)
350 AC (...50 °C) / 250 AC (...70 °C) /
100 DC
Current rating [mA](In brief)
î: 2.2 A (20 ms / 0.5 Hz)
Environmental conditions [°C] -25...70
Connection Screw terminals
Accessories
Type Description Orderno.
Plug for covering the oblong holes,EPDM E12212
Protective cap, PA 6.6 E12209
Target puck Ø 53 mm E17320
Target puck Ø 102 mm E17328
Spacer for ifm puck, PA E12084
Cable gland, M20 x 1.5, PA 6.6 E12208
26
Position sensors
Feedback for handvalves
Valves sensors, accessories
Suitable for ISO top flange valves from F04 to F10
Easy installation on manual valves and ball valves
Height-adjustable for flexibility
Stainless steel components for long life
Ideal for hazardous areas
End position feedback for manual valves and ball valvesWith this mounting kit, you can very easily equip your manual valves withsensors and target pucks. A large number of sensors and pucks can beused on the 80 x 30 mm actuator interface to VDI /VDE 3845. The entiresystem can be used at ambient temperatures from -30 to +80 °C.
Versatile and flexibleThe upper part is made out of Vestamid and allows operation in hazardousareas. The lower part fits on many ISO flange valves (DIN EN ISO 5211) andis connected to the valve shaft by a shaft extension. Stainless steel components guarantee increased service life.
27
(11.2016)
E12520 (F05/M5)/
E12521(F05/M6)
E12524(F10/M8)
Order no.
E12522(F07/M6)/
E12523(F07/M8)
E12519 (F04/M5)
Accessories
Type Description Orderno.
Inductive sensor, PBT, M12 connector IN5327
Target puck Ø 53 mm, PA 6, V2A (1.4302) E17320
Plug for covering the oblong holes,EPDM E12212
NN5008
For further technical details please visit: www.ifm.com
20.70A
B
C
D
H1
H2
20
60
54
D4
D5
42
5.3
60
70
H3
H4
80
90
H5 100
24.36
15
60
54
50
6.5
60
70
80
90
100
34.50
15
65
54
70
8.5
60
70
80
90
100
52.12
15
93
74
102
11
80
90
100
110
120
Dimensions
Connection technology
Type Description Orderno.
Socket, M12,5 m orange, PVC cable EVT001
Socket, M12, ATEX approval5 m, blue, PUR cable ENC02A
Switching amplifiers for Namur sensors, 2 channels N0532A
AS-i sensor, M12 connector AC2315
NAMUR sensor (1D,1G, 2G), M12 connector
15C
4
4,8
25
5
620
12H
1H
2H
3H
4H
5
A
DB
13
4,8
D5
12
4
60
4
M
D4
28
Sensors for motion control
Intelligent incremental encoder with display and IO-LinkEncoders
Resolution of 2...10,000 and signal level (TTL / HTL) freelyprogrammable
Display: Two-colour electronic rotatabledisplay of the process values
Versatile: M12 connector can be used radially or axially
Standard fitting: Solid shaft(clamp / synchro flange) or hollow shaft design
Motion controller: Encoder, speed/direction monitorand counter all in oneThe magnetic sensing principle provides the accuracy of photoelectric encoders and the robustness of magnetic systems.Resolution and signal level can be programmed. The encoders have a widevoltage range of 4.75...30 V DC and are therefore suited for universal use.Performance Line encoders have an integrated signal evaluation for speedmonitoring, counter functions and detection of the direction of rotation.They provide easy setting, position indication by means of display and operating keys and intuitive menu navigation.Diagnostic and parameter data are reliably transferred via IO-Link. Ready for Industry 4.0.
29
(04.2016)
For further technical details please visit: www.ifm.com
Flange IO-LinkResolution
[pulse/revolution]
Orderno.
Hollow shaft with integrated stator coupling· 4-digit display · Integrated pulse evaluation
direct •max. 10,000 (adjustable) ROP52012
Operating voltage
[V DC]
4.75...30
Shaft Ø
[mm]
Solid shaft · 4-digit display · Integrated pulse evaluation
synchro •max. 10,000 (adjustable) RUP5006 4.75...30
clamp flange •max. 10,000 (adjustable) RVP51010 4.75...30
Protection IP 65, IP 67
Connection M12 connector (rotatable)
Further technical data
58
58
58
Housing Ø
[mm]
Switching frequency [kHz] 1000
Accessories
Type Description Orderno.
Spring disc coupling, Ø 6 mm / 10 mm, die-cast zinc; PA E60117
Spring disc coupling, Ø 10 mm / 10 mm, die-cast zinc; PA E60118
Flexible coupling with clamp connection,Ø 6 mm / 10 mm, aluminium E60066
Flexible coupling with clamp connection,Ø 10 mm / 10 mm, aluminium E60067
Flexible coupling with adjusting screws,Ø 10 mm / 10 mm, aluminium E60022
Flexible coupling with adjusting screws,Ø 6 mm / 10 mm, aluminium E60028
Measuring wheel, Ø 159.15 mm / 10 mm, Hytrel TPE-E E60110
Measuring wheel, Ø 159.16 mm / 10 mm, aluminium, PU E60076
Measuring wheel, Ø 63.66 ± 0.1 mm / 10 mm, Hytrel TPE-E E60138
Measuring wheel, Ø 63.6 mm, 10 mm, aluminium E60095
Measuring wheel, Ø 63.66 ± 0.1 mm / 6 mm, aluminium E60137
Measuring wheel, Ø 63.6 mm, 6 mm, aluminium E60006
Angle bracket for RUP design,aluminium, black anodised E60033
Angle bracket for RUP design,aluminium, black anodised E60035
Fastening clamp for synchro flange, steel E60041
Memory plug, parameter memoryfor IO-Link sensors E30398
LINERECORDER SENSOR,Software for parameter setting and set-up of IO-Link sensors
QA0001
Accessories
Type Description Orderno.
Connection technology
Type Description Orderno.
M12 socket, shielded,5 m black, PUR cable, 8 poles E12403
M12 socket, shielded,10 m black, PUR cable, 8 poles E12404
M12 socket, shielded,2 m black, PUR cable, 8 poles E12402
USB IO-Link master for parameter settingand analysis of unitsSupported communication protocols:IO-Link (4.8, 38.4 and 230 Kbits/s)
E30390
Adapter cable for the connectionbetween USB IO-Link master E30390and 3-pole / 8-pole encoder
E12432
Flexible coupling with clamp connection,Ø 6 mm / 1/4", aluminium E60206
Flexible coupling with clamp connection,Ø 6 mm / 3/8", aluminium E60207
Flexible coupling with clamp connection,Ø 10 mm / 1/2", aluminium E60208
Flexible coupling with clamp connection,Ø 10 mm / 3/8", aluminium E60209
Connection cable, M23 plug / M12 socket, PUR cable, shielded,0.3 m black, 8 poles
E12460
30
Sensors for motion control
Robust speed sensors – also with ATEX approval
Speed sensors
Robust M30 metal housing, no additional impact protectionhousing required
Ideal in combination with a PLC
Flush installation
Flexible voltage supply: (20...250 AC/DC)
ATEX approval group II, category 3D
Compact speed monitoringThe new speed sensors are the compact solution for speed monitoring because the evaluation electronics are integrated in the sensor housing.The limit at the speed of which the output switches is set via a potentio-meter. Both rotary and linear movements can be monitored for overspeed,underspeed and blockage.As compared to its predecessors, these new sensors feature a robust metal housing for flush mounting. A special version with ATEX approval isavailable for which no additional impact protection is required.
31
(04.2016)
For further technical details please visit: www.ifm.com
Operating voltage
[V]
Start-up-delay
[s]
Ambienttemperature
[°C]
ATEX approvalMax. load current
[mA]
Orderno.
M30 x 1.5 inductive sensor · connection cable
20...250 AC/DC (45...65 Hz, AC) 12 -25...80 –350 AC (50 °C),
250 AC / 100 DC (80 °C) DI0101
20...250 AC/DC (45...65 Hz, AC) < 0.5 -25...80 –350 AC (50 °C),
250 AC / 100 DC (80 °C) DI0104
20...250 AC/DC (45...65 Hz, AC) 12 -20...60 Group II,
category 3D200 AC / 100 DC
(60 °C) DI103A
Further technical data
Setting range [pulses/min] 5...3600
Switch point setting Multiturnpotentiometer
Switching status indication LED 2 x yellow
Housing materialsBrass
special coating; PA (Polyamid); TPE-U
Connection PUR cable, 2m
Protection rating IP 65, IP 67
Protection class II
Accessories
Type Description Orderno.
ApplicationsEspecially in the field of conveying technology the compact speed sensors can be used for various applica-tions, for example for monitoring belt conveyors orbucket elevators. Here they are typically used to monitor underspeed, blockage or standstill.
AdvantagesThe speed sensors incorporate the complete speed monitoring because the evaluation electronics and thesensor are integrated in one housing. The switch pointis set using a multi-turn potentiometer. Hysteresis andstart-up delay are firmly set.
OperationThe integrated sensor is damped by passing cams orother metallic targets. On the basis of the time intervalbetween damping the evaluation unit determines theperiod duration or the frequency (actual rotationalspeed value) and compares it to the set switch point(preset value). The output is switched during the start-up delay andwhen the rotational speed exceeds the set switchingvalue.An LED signals underspeed and switch-off of the output.
Dimensions
8075,5
M30
x1,5
5,4
2,2
365
1
LEDs
1) potentiometer
WH
BK
L1L+
LN
Wiring
Target wheel E89010
Mounting clamp with end stop for M30 types E11049
Fixing clamp with reducing bush for M30 types E10077
Angle bracket for M30 types E10737
Lock nuts, nickel-plated brass E10030
Lock nuts, high-grade stainless steel(316Ti/1.4571) E10031
Mounting set, free-standing M12 clamp mounting, Ø 30.2 mm E20873
Mounting set, aluminium profileclamp mounting, Ø 30.2 mm E20875
Clamp with damping cams E89013
32
Sensors for motion control
Decentralised display, preprocessing and conversion ofanalogue signalsPulse evaluation systems
Mini display to monitor values
Clearly visible display withred/green colour change
Compact design with protection rating IP 67
Parameter setting via IO-Link
Conversion of analogue measured values to an IO-Linkcommunication
Analogue signals at a glanceThe compact connector unit is simply inserted in the connection cable ofanalogue sensors (4...20 mA). It displays the measured values locally. Theuser can set a switch point or limit at which the transistor output switches.A colour change (red /green) of the display indicates this unmistakably. Critical process states or operational problems are reliably signalled.
Converter for Industry 4.0A special feature is the signal conversion: The threshold display convertsanalogue signals to digital IO-Link signals. Today they are required in almostany modern industrial environment and for Industry 4.0 applications.
33
(11.2016)
Threshold displayDP2200
Dimensions
31
24
3
30
M12 x 1
M12 x 1
63
1
2
1) Push ring2) LEDs3) Display
Wiring diagram
43
2 1
3
1 2
45
M12: plugPin 1: L+ supplyPin 2: OUT2 analogue outputPin 3: L- supplyPin 4: OUT1 switching output 1 or IO-Link
M12: BuchsePin 1: L+ sensor supplyPin 2: 4...20 mA analogue inputPin 3: L- sensor supplyPin 4: not usedPin 5: not used
Typical plant configuration
sensor parameter setting
LINERECORDERsensor 4.0
IO-LinkThresholddisplaywithIO-Link
USBadapter
PLC
4...20 mA
4...20 mA
industrial fieldbus
4...20 mA
IO-Link masterIP67
PLC
industrial fieldbus
IO-Linksensors
withoutIO-Link
· · ·1 7 8
M
withoutIO-Link
Operating voltage [V DC] 27 (typ. 24)
Inputs 1 x analogue,4...20 mA
Ambient temperature [°C] -25...70
Protection IP 67
Output status indication LED yellow
Operation LED green
Wiring M12 connector
Outputs
1 x digital / IO-Link,normaly open / closed
programmable1 x analogue, 4...20 mA
Display
7-segment LED display 4-digit
red/green programmable
Technical data
For further technical details please visit: www.ifm.com
Accessories
Type Description Orderno.
Mounting clip E89208
LINERECORDER SENSOR,Software for parameter setting and setting up IO-Link sensors
QA0001
USB IO-Link master for parameter settingand analysis of unitsSupported communication protocols: IO-Link (4.8, 38.4 and 230 Kbits/s)
E30390
34
Sensors for motion control
Multifunctional display: speed, time, counter
Systems for pulse evaluation
Clearly legible display
4 switching outputs and / oranalogue output (V or mA)
250 kHz input frequency
PNP, NPN or NAMUR inputs
Touch display and clear text for intuitive handling
Versatile pulse evaluationThe multifunction display shows various measured values in industrial automation. It uses the principle of interval measurement to processesinput pulses. The scaling factor allows (rotational) speed and processingtime, etc., to be calculated, displayed and converted into an analogue signal. The unit can also act as a counter or an industrial timer.
High performanceFive different operating modes, optional analogue and switching outputs aswell as the convenient display make the multifunctional evaluation systemfit for various applications in industrial automation.
35
(11.2016)
For further technical details please visit: www.ifm.com
Dimensions
Operating voltage
[V]
Inputs Inputsprogrammable
Outputs Transistor
Outputs Relay
Orderno.
Multifunction display · touch display and clear text
24 DC 2 3 –– DX2031
24 DC 2 3 4V or mA DX2032
24 DC 2 3 4– DX2033
Operating voltage [V DC] 18...30
Current consumption [mA] approx. 150 (without load)
Sensor supply [V DC] Output current
UB -1 Vmax. 250 mA
Incremental inputs Usage
Format Frequency
PNP, NPN, Namur encodersand sensors
HTL (10...30 V)max. 250 kHz
Control inputs Format Frequency
HTL, PNP (10...30 V)max. 250 kHz
Analogue output(only DX2032) Voltage output Current output Resolution Accuracy
-10...10 V / 0...10 V 0...20 mA / 4...20 mA
16 bits± 0.1 %
Control outputs(DX2032 / DX2033) Format / level
Output current
3...30 V (depending on thevoltage on Com+), PNPmax. 250 mA (max. 150
mA at Com+ <10 V)
Display Type Colour
Handling
LCD (backlight)red, green, yellow
(selectable)Touch screen (resistive)
Ambient temperature [°C] -20...60
Dimensions (W x H x D) [mm] 96 x 48 x 100
Common technical data
4
8
96,2 115,3114
36
Industrial imaging
Augmented reality:mobile 3D smart camera with overlayfunctionCamera systems for mobile machines
3D sensor system with inte-grated 2D camera and overlayfunction
Indication of warnings and obstacles in the live view
Signal processing in the sensor, no external process unit required
Easy adjustment via ifm Vision Assistant
Augmented realityThe 3D smart camera is the first 3D sensor system with integrated 2D camera.The video image is displayed with real-time graphics, symbols or texts. They are either triggered by the integrated driver assistance system or bythe machine controller via CAN. Thus, the user can always see all relevantwarnings or other relevant details in the camera image.
Integrated assistance systemIn addition to the 3D and 2D image sensor a complete evaluation system is integrated in the sensor system. This system provides an independent assistance system for collision avoidance for the user. Set-up only requiresjust a few steps using the ifm Vision Assistant PC software. In addition tothe analogue video output the smart camera also features a CAN andEthernet UDP interface. The system can use this interface to supply warningsin critical situations autonomously.
37
(11.2016)
For further technical details please visit: www.ifm.com
Further technical dataO3M251
Housing material diecast aluminium
PAL resolution [pixels] 640 x 480
Type of sensor 1/4" 4:3 VGA CMOS image sensor Color
Connection M12 connector
Protection rating, protection class
IP 67 / IP 69K, III
Operating voltage [V DC] 9...32
Current consumption sensor [mA] < 500
Current consumption [A]system illumination unit < 5
Ambient temperature [°C] -40...85
Interfaces1x CAN,
1 x fast Ethernet, 1x PAL
Storage temperature -40...105
Supported CAN protocols CANopen, SAE J 1939
Standards and tests (extract)
CE,E1 (UN-ECE R10)
Resolution
[pixels]
Angle of aperturehorizontal x vertical
[°]
IlluminationAngle of aperture2D[°]
Orderno.
PMD 3D sensor · Type O3M · M12 connector
64 x 16 70 x 23 Ext. illumination required (O3M950)90 O3M251
Max. sampling rate
[Hz]
25/33/50
Accessories
Type Description Orderno.
IR system illumination unit (850 nm) for mobile 3D sensors, angle of aperture 70 x 23
O3M950
CAN/RS232 USB interface CANfox EC2112
Adapter cable set for CANfox EC2114
Operating software for vision sensors E3D300
U-shaped bracket, suitable for sensor or illumination E3M100
Weather protective cover (the article E3M100 or E3M102 is required for installation)
E3M101
U-shaped bracket, suitable for sensor or illumination unit E3M102
Connection technology
Type Description Orderno.
MCI cable, connection sensor / system illumination unit, 0,25 m E3M120
MCI cable, connection sensor / system illumination unit, 1 m E3M121
MCI cable, connection sensor / system illumination unit, 2 m E3M122
MCI cable, connection sensor / system illumination unit, 3 m E3M123
M12 video connection cable, connectionsensor / display PDM360, 5 m E3M151
M12 video connection cable, connectionsensor / display PDM360, 11 m E3M152
M12 video connection cable, connectionsensor / display PDM360, 16 m E3M153
M12 video connection cable, connectionsensor / display PDM360, 21 m E3M154
M12 socket, voltage supply system illumination unit, 2 m, PUR cable, 4 poles
E3M131
M12 socket, voltage supply system illumination unit, 5 m, PUR cable, 4 poles
E3M132
M12 socket, voltage supply system illumination unit, 10 m, PUR cable, 4 poles
E3M133
Ethernet, cross-over patch cable,2 m, PVC cable, M12 / RJ45 E11898
Ethernet, cross-over patch cable,10 m, PVC cable, M12 / RJ45 E12204
Ethernet, cross-over patch cable,20 m, PVC cable, M12 / RJ45 E12205
CAN jumper, screened, 2 m, PUR cable, M12 plug / M12 socket
E11593
CAN jumper, screened, 5 m, PUR cable, M12 plug / M12 socket
E11594
CAN jumper, screened, 10 m, PUR cable, M12 plug / M12 socket
E11595
M12 video extension cable, 5 m E3M159
M12 video adapter cable / Cinch plug,for connection of a video grabber, 1 m E3M160
38
Industrial imaging
Mobile 3D camera –2D and 3D in oneunit
Camera systems for mobile machines
Robust outdoor camera plat-form for innovative functiondevelopment
Synchronous output of 3Dpoint cloud and live cameraimage
Robust raw data, independentof ambient light and colour
Video output (PAL) and Ethernet UDP
High shock and vibration resistance
Two images in one unitThe O3M250 is the first 3D sensor system with integrated 2D camera forthe output of a calibrated video image. In this context, calibrated meansthat the 2D image is superimposed on the 3D image.
For external evaluationThe camera system has been designed for system integrators and customerswho intend to use 3D sensor data with their own algorithms in an externalprocess unit. The image is sent as a PAL video image and the 3D point cloudis transmitted via Ethernet UDP.
Easy setupifm offers the Windows software “ifm Vision Assistant” for setup and parameter setting.
39
(11.2016)
For further technical details please visit: www.ifm.com
Further technical dataO3M250
Housing material diecast aluminium
PAL resolution [pixels] 640 x 480
Type of sensor 1/4" 4:3 VGA CMOSimage sensor Color
Connection M12 connector
Protection rating, protection class
IP 67 / IP 69K, III
Operating voltage [V DC] 9...32
Current consumption sensor [mA] < 500
Current consumption [A]system illumination unit
< 5
Ambient temperature [°C] -40...85
Interfaces 1 x fast Ethernet, 1x PAL
Storage temperature [°C] -40...105
Standards and tests (extract)
CE,E1 (UN-ECE R10)
Accessories
Connection technology
Type Description Orderno.
Resolution
[pixels]
Angle of aperturehorizontal x vertical
[°]
IlluminationAngle of aperture2D[°]
Orderno.
PMD 3D sensor · Type O3M · M12 connector
64 x 16 70 x 23 Ext. illumination required (O3M950)90 O3M250
Max. sampling rate
[Hz]
25/33/50
Type Description Orderno.
IR system illumination unit (850 nm) for mobile 3D sensors, angle of aperture 70 x 23
O3M950
CAN/RS232 USB interface CANfox EC2112
Adapter cable set for CANfox EC2114
Operating software for vision sensors E3D300
U-shaped bracket, suitable for sensor or illumination E3M100
MCI cable, connection sensor / system illumination unit, 0,25 m E3M120
MCI cable, connection sensor / system illumination unit, 1 m E3M121
MCI cable, connection sensor / system illumination unit, 2 m E3M122
MCI cable, connection sensor / system illumination unit, 3 m E3M123
M12 video connection cable, connectionsensor / display PDM360, 5 m E3M151
M12 video connection cable, connectionsensor / display PDM360, 11 m E3M152
M12 video connection cable, connectionsensor / display PDM360, 16 m E3M153
M12 video connection cable, connectionsensor / display PDM360, 21 m E3M154
M12 socket, voltage supply system illumination unit, 2 m, PUR cable, 4 poles
E3M131
M12 socket, voltage supply system illumination unit, 5 m, PUR cable, 4 poles
E3M132
M12 socket, voltage supply system illumination unit, 10 m, PUR cable, 4 poles
E3M133
Ethernet, cross-over patch cable,2 m, PVC cable, M12 / RJ45 E11898
Ethernet, cross-over patch cable,10 m, PVC cable, M12 / RJ45 E12204
Ethernet, cross-over patch cable,20 m, PVC cable, M12 / RJ45 E12205
CAN jumper, screened, 2 m, PUR cable, M12 plug / M12 socket
E11593
CAN jumper, screened, 5 m, PUR cable, M12 plug / M12 socket
E11594
CAN jumper, screened, 10 m, PUR cable, M12 plug / M12 socket
E11595
M12 video extension cable, 5 m E3M159
M12 video adapter cable / Cinch plug,for connection of a video grabber, 1 m E3M160
Weather protective cover (the article E3M100 or E3M102 is required for installation)
E3M101
U-shaped bracket, suitable for sensor or illumination unit E3M102
40
Industrial imaging
True 3D vision sensor with intelligentfunctions
Camera systems formobile machines
Simple application solutionsthanks to preprocessed 3D data
Easy integration via predefinedCODESYS function blocks
Patented pmd time-of-flighttechnology for quick distancedetection
Optimised for reliable outdooruse with IP 67 and IP 69K
Angle of aperture up to 95°
Mobile 3D smart sensors O3MThe 3D detection of scenes and objects, already a standard on the factoryfloor, is ready for mobile machines. Apart from new possibilities for vehicleautomation (AGV, automatic guided vehicles) this results in new assistancefunctions for automation tasks.Different integrated functions configurable via the Windows software areavailable as standard.The simple connection of the 3D smart sensors is carried out via the CAN busfor mobile applications using the CANopen or SAE J 1939 protocol and/orvia the fast Ethernet interface using UDP.
41
(04.2016)
For further technical details please visit: www.ifm.com
Description Orderno.
IR system illumination unit (850 nm) for mobile 3D sensors, angle of aperture 70 x 23 O3M950
IR system illumination unit (850 nm) for mobile 3D sensors, angle of aperture 95 x 32 O3M960
Further technical dataSmart sensors O3M151, O3M161
Accessories
Housing material diecast aluminium
Device connection M12 connector
Protection rating, protection class
IP 67 / IP 69K, III
Operating voltage [V DC] 9...32
Functions and advantages
Powerful 3D time-of-flight measurement (ToF)The principle of these 3D sensors is based on ifm’s patented and award-winning pmd technology. It was specifically designed for outdoor use and difficultambient light situations. Even interference such as sun-light or materials with different reflective characteristicsdo not influence the repeatability of the measured data.Powerful electronicsThe integrated 2 x 32-bit processor architecture ensuresa rapid and reliable calculation of the 3D data andfunctions directly integrated in the system with up to50 fps. The complete electronics of the mobile 3D smart sensor is optimised and adapted to the demands andrequirements of mobile machines. Besides shock and vibration resistance self-diagnosticfunctions from the sensor to the IR system illuminationunit are of course also available.Smart functionsThe mobile 3D smart sensors integrate some functionswhich enable a multitude of applications to be solved. A highly developed algorithm from the automotive industry is used ensuring, for example, reliable automatic object recognition of up to 20 objects. This functioncan, for example, be used as collision warning. For simple distance tasks typical functions such as minimum / maximum / average distance are available.System parameter setting and monitoringThe parameter setting of the system and live monitoring of the 3D data are carried out via the easy-to-use ifmvision wizard for Windows. As an alternative, parameter setting can also be carried out via function blocks usingthe software CODESYS.Communication interfacesThe preprocessed function data is output via the CANbus using CANopen or SAE J 1939. If needed, the complete 3D information can be processed at the sametime via Ethernet UDP and an external process unit.
Current consumption sensor [mA] < 400
Current consumption [A]system illumination unit < 5
Ambient temperature [°C] -40...85
Interfaces 1x CAN, 1 x fast Ethernet
Supported CAN protocols CANopen, SAE J 1939
Standards and tests (extract)
CE,E1 (UN-ECE R10)
CAN/RS232 USB interface CANfox EC2112
Adapter cable set for CANfox EC2114
Operating software for vision sensors E3D300
U-shaped holder, suitable for sensor or illumination unit E3M100
Connection technology
MCI cable, connection sensor / system illumination unit, 1 m E3M121
MCI cable, connection sensor / system illumination unit, 2 m E3M122
Type Description Orderno.
M12 socket, voltage supply system illumination unit, 2 m, PUR cable, 4 poles
E3M131
M12 socket, voltage supply system illumination unit, 10 m, PUR cable, 4 poles
E3M133
Ethernet, cross-over patch cable,2 m, PVC cable, M12 / RJ45 E11898
Ethernet, cross-over patch cable,10 m, PVC cable, M12 / RJ45 E12204
Type of sensor Resolution pixels [pixel]
IlluminationAngle of aperturehorizontal x vertical
[°]
Orderno.
PMD 3D sensor · Type O3M · M12 connector
PMD 3D chip 64 x 16 ext. illumination required (O3M950)70 x 23 O3M151
Max. sampling rate
[Hz]
25/33/50
PMD 3D chip 64 x 16 ext. illumination required (O3M960)95 x 32 O3M16125/33/50
42
Industrial imaging
3D sensors for mobile machines
Camera systems formobile machines
Support for system integrators with data outputvia Ethernet UDP
Patented pmd time-of-flighttechnology for quick distancedetection
Optimised for reliable outdoor use
Robust design with IP 67 and IP 69K
Angle of aperture up to 95°
Mobile 3D sensors O3MThe 3D detection of scenes and objects, already a standard on the factoryfloor, is ready for mobile machines. Apart from new possibilities for vehicleautomation (AGV, automatic guided vehicles) this results in new assistancefunctions for automation tasks.Besides position data at pixel level the respective distance to the sensor system or an adjustable reference point (world coordinate system) is provided. Thanks to the permanent output of the entire 3D information via Ethernet UDP optimum conditions for customer-specific application solutions are provided to system integrators.
43
(04.2016)
For further technical details please visit: www.ifm.com
Further technical dataO3M150, O3M160
Housing material diecast aluminium
Device connection M12 connector
Protection rating, protection class
IP 67 / IP 69K, III
Operating voltage [V DC] 9...32
Functions and advantages
Powerful 3D time-of-flight measurement (ToF)The principle of these 3D sensors is based on ifm’s patented and award-winning pmd technology. It was specifically designed for outdoor use and difficultambient light situations. Interference such as sunlightor materials with different reflective characteristicswhich occurs in the area of mobile machines does notinfluence the repeatability of the measured data.
Powerful electronicsThe integrated 2 x 32-bit processor architecture ensuresa rapid and reliable calculation of the distance image tobe output with up to 50 fps. The complete electronicsof the mobile 3D sensor is optimised and adapted to the demands and requirements of mobile machines. Besides shock and vibration resistance self-diagnosticfunctions from the sensor to the IR system illuminationunit are of course also available.
High system uptimeThe system has various features to ensure uninterrupted operation. They include, among others, soiling indication as well as different status information which can be fetched from CAN.
System parameter setting and monitoringThe parameter setting of the system and live monitoring of the 3D data are carried out via the easy-to-use ifmvision wizard for Windows.
Communication interfacesThe mobile 3D sensors feature a fast Ethernet interface (100 Mbit) as well as a CAN interface. The data outputof the complete 3D information is carried out via Ethernet UDP and can be processed using a processunit at the customer’s end. For this version the CAN in-terface is only intended for parameter setting and status output.
Current consumption sensor [mA] < 400
Current consumption [A]system illumination unit < 5
Ambient temperature [°C] -40...85
Interfaces 1x CAN, 1 x fast Ethernet
Connection technology
MCI cable, connection sensor / system illumination unit, 1 m E3M121
MCI cable, connection sensor / system illumination unit, 2 m E3M122
Type Description Orderno.
M12 socket, voltage supply system illumination unit, 2 m, PUR cable, 4 poles
E3M131
M12 socket, voltage supply system illumination unit, 10 m, PUR cable, 4 poles
E3M133
Ethernet, cross-over patch cable,2 m, PVC cable, M12 / RJ45 E11898
Ethernet, cross-over patch cable,10 m, PVC cable, M12 / RJ45 E12204
Type of sensor Resolution pixels [pixel]
IlluminationAngle of aperturehorizontal x vertical
[°]
Orderno.
PMD 3D sensor · Type O3M · M12 connector
PMD 3D chip 64 x 16 ext. illumination required (O3M950)70 x 23 O3M150
Max. sampling rate
[Hz]
25/33/50
PMD 3D chip 64 x 16 ext. illumination required (O3M960)95 x 32 O3M16025/33/50
Description Orderno.
IR system illumination unit (850 nm) for mobile 3D sensors, angle of aperture 70 x 23 O3M950
IR system illumination unit (850 nm) for mobile 3D sensors, angle of aperture 95 x 32 O3M960
Accessories
Supported CAN protocols CANopen, SAE J 1939
Standards and tests (extract)
CE,E1 (UN-ECE R10)
CAN/RS232 USB interface CANfox EC2112
Adapter cable set for CANfox EC2114
Operating software for vision sensors E3D300
U-shaped holder, suitable for sensor or illumination unit E3M100
44
Industrial imaging
MultiViewBox: display up to 4 camera images on one screenCamera systems for mobile machines
Video splitter for up to four camera images
9 different display modes (incl. bird’s eye view)
Analogue video output (PAL)
Shock and vibration resistant,potted stainless steel housing
E4 type approval, optimised for use in mobile machines
Suitable camera images in every situationThe multi-view box has been designed for use in mobile machines in harshenvironments. It features four camera inputs. Depending on the require-ments, 1, 2 or 4 camera images can be selected simultaneously in differentarrangements via one control input. For example: Cam1 when moving for-wards and Cam2 and 3 when moving backwards. In the “bird’s eye view” 4 camera images can even be combined to become one 360° view. A totalof 9 different display modes are available for the user.
Analogue video outputThe ifm PDM360 dialogue module with analogue video input which is alsosuitable for mobile use or any other video display with PAL video input canbe used as display.
45
(11.2016)
For further technical details please visit: www.ifm.com
Connection technology
Type Description Orderno.
Connection cable, M16, 3,85 m, 8 poles, for the voltage supply of the E2M250 multi-view box, open cable end
E2M251
Socket, M16, wirable 8 poles, for the voltage supply of theE2M250 multi-view box
E2M252
Adapter cable, 0.6 m black, PUR cable,M12 connector / M16 socket, to connectthe MultiViewBox to the PDM NG
E2M200
Jumper, 5 m black, PUR cable, M16 plug / M16 socket
E2M203
Jumper, 11 m black, PUR cable, M16 plug / M16 socket
E2M204
Jumper, 16 m black, PUR cable, M16 plug / M16 socket
E2M205
Jumper, 21 m black, PUR cable, M16 plug / M16 socket
E2M206
Current consumption [mA] < 1200
Video signal
PAL (25 fps, interlacing)
720H x 576V (active 680 x 480)
Ambient temperature [°C] -40...85
Protection IP 67 (ISO 20653)
Approval UN-ECE R10
Housing materials stainless steel SS316 (1.4401)
Connection M16 connector
MultiViewBoxE2M250
Technical data
Operating voltage [V DC] 10...32 DC
Products
Orderno.
Video splitter,visualisation of up to 4 camera images(PAL) on one process and dialogue mo-dule
E2M250
Type Description
Angle of aperture 78°,lens heating O2M200
Angle of aperture 78°, lens heating, integrated mirror function O2M201
Angle of aperture 115°,lens heating O2M202
Angle of aperture 115°, lens heating, integrated mirror function O2M203
MultiViewBox
Analogue camera, 0.5 m connection cable with M16 connector
Dimensions
180160
113,
510
0 73851,
540
1 2 3 4 5 6
1) INPUT2) OUTPUT3) C44) C35) C26) C1
46
Industrial imaging
Photoelectric 3Dlevel measurementand point level detection3D sensors
Continuous measurement ofuneven surfaces
Determines min, max or meanvalues
Teaching of different tank shapes
Interfering structures are suppressed
Non-contact detection of opaque media for levels of up to 10 m
Flexible configurationThe system detects solid, opaque solids and bulk materials in tanks, silos orhoppers with levels of up to 10 m. The O3D reliably detects the load heightin machinery for mechanical handling, e.g. belts, and the loading of pallets.The sensor determines the level via a defined background and transmits theprocess value via analogue output or digitally and noise immune via theEthernet process interface. Alternatively, the O3D may be used as a pointlevel switch.The measuring segment of the sensor can be adapted to the shape of therespective tank. Agitators and other attachments can be suppressed via“exclusion regions”. Various container shapes, such as hoppers, silos oreven inclined belts can be recognised by the sensor. This means that for bulk materials the average level is indicated, even ifthere are conical heaps or funnelling.
47
(11.2016)
For further technical details please visit: www.ifm.com
Mounting set for O3D E3D301
Further technical data
Accessories
Operating voltage [V DC] 20.4...28.8
Current consumption [mA]
< 2400 peak current pulsed;
typ. mean value 420
Current rating [mA](per switching output) 100
Real chip resolution 25,000 / 100,000
Resulting resolution 176 x 132 pixels
Function display LED 2 x yellow,2 x green
Illumination 850 nm,infrared
Ambient light [lux] max. 10,000 (indoor)
Trigger
external; 24 V PNP / NPN
according to IEC 61131-2 type 3
Switching inputs
2 (configurable), 24 V PNP/NPNaccording to
IEC 61131-2 type 3
Switching outputsdigital
3 (configurable), 24 V PNP/NPN, according to IEC 61131-2
Switching outputsanalogue
1 (can be configured as
current output 4...20 mAor voltage
output 0...10 V)
Ambient temperature [°C] -10...50
Ethernet, cross-over patch cable,2 m, PVC cable, M12 / RJ45 E11898
Ethernet, jumper cables,2 m, PVC cable, M12 / M12 E21138
Type of sensor Materialfront pane /LED window
Angle of aperture
[°]
Protection rating,protection class
Orderno.
PMD 3D sensors · Type O3D · M12 connector
PMD 3D ToF chip Gorilla glass /polyamide
Materialhousing
Aluminium 40 x 30IP 65 / IP 67,III O3D300
Max. field of view size
[m]
2.61 x 3.47
PMD 3D ToF chip Gorilla glass /polyamideAluminium 60 x 45IP 65 / IP 67,
III O3D3023.75 x 5.00
PMD 3D ToF chip Polycarbonate /polyamideStainless steel 40 x 30IP 65, IP 67, IP 69K /
III O3D3102.61 x 3.47
PMD 3D ToF chip Polycarbonate /polyamideStainless steel 60 x 45IP 65, IP 67, IP 69K /
III O3D3123.75 x 5.00
Socket, M12,2 m black, PUR cable, 8 poles E11950
Type Description Orderno.
Cooling element E3D302
Double cooling element E3D304
Heat conductor E3D303
Short-circuit protection, pulsed •
Overload protection •
Parameter setting interface Ethernet 10 Base-T / 100 Base-TX
Possible parameter settings via PC / notebook
Dimensions (H, W, D) [mm] 72 x 65 x 85
Technical data Level measurement and point level detection
Typ. level [m] 0.3...6
Operating distance max. [m] 10
Sampling rate [Hz] 5
Mounting accessories
Connection technology
48
Process sensors
Pressure transmitters with DEUTSCH, AMPor M12 connector for mobile applicationsPressure sensors
Compact design (AF19) with process connection G 1/4 male
Fast reaction: 2 milliseconds response time
Measuring accuracy < ± 0.8 %, repeatability < ± 0.05 %
Easy connection via DEUTSCH,AMP or M12 connector
Robust low-cost solution with welded stainless steel housing
Miniaturisation for mobile applicationsThe connectors of the new PT/PU pressure sensors allow fast and easy installation in mobile machines.The sensors also feature a thin-film measuring cell directly welded with theprocess connection. This technology guarantees high accuracy in a very compact housing withonly 19 mm across flats at a cost-optimised price/performance ratio.
ApplicationsThe PT/PU type sensors are suited for mobile applications and especially for hydraulic and pneumatic applications with high operating pressure.The high vibration and shock resistance, the high protection rating, the excellent EMC resistance and the E1 conformity make the PT/PU sensorsparticularly suitable for use in mobile machines.
49
(04.2016)
For further technical details please visit: www.ifm.com
Accessories
Type Description Orderno.
Operating voltage PT [V DC] PU [V DC]
8...3216...32
Common technical data
Medium temperature [°C] -40...125
Materials wetted parts
1.4542 (17-4 PH / 630),characteristics similar to
stainless steel (e.g. 304/1.4301)
but higher strength
Protection IP 67 / IP 69K
Step response time [ms] 2
Restrictor •
EMC
Compliant with UN-ECE10Rev. 4
ISO 11452: 100 V/mEN61326
Reverse polarity protection •
Adapters; G 1/4 - G 1/2, high-grade stainless steel (316Ti/1.4571) E30135
Accuracy / deviation(in % of the span)Linearity errorLinearityHysteresisRepeatabilityLong-term stabilityTemperature coefficients (TEMPCO)in the temperature range 0 ... 80 °C(in % of the span per 10 K)TEMPCO of zeroTEMPCO of the spanTemperature coefficients (TEMPCO)in the temperature ranges -40...0 °C and 80...125 °C(in % of the span per 10 K)TEMPCO of zeroTEMPCO of the span
< ± 0.8< ± 0.25 BFSL / < ± 0.5 LS
< ± 0.2< ± 0.05< ± 0.1
< ± 0.1< ± 0.1
< ± 0.2< ± 0.2
Wiring diagram
Dimensions
12
65,9
51,6
M12 x118,9
G1 4/19
1
Example: type PT55
1) HNBR seal / DIN 3869
PU5704
PU5703
PU5702
PU5701
PU5700
PU5760
PU5604
PU5603
PU5602
PU5601
PU5600
PU5660
Measuring rangerelative pressure
[bar]
Poverloadmax.[bar]
Pburstmin.[bar]
Output function 4…20 mA,
0...10 25 300
0...25 65 600
0...100 250 1000 PT5702
0...250 625 1200 PT5701
0...400 1000 1700 PT5700
0...600 1500 2400 PT5760
Output function 0...10 V
0...10 300
0...25 600
0...100 1000
PT5602
0...250 1200
PT5601
0...400 1700
PT5600
0...600 2400
PT5660
PT5502
PT5501
PT5500
PT5560
25
65
250
625
1000
1500
Orderno.
PT5504
M12 connector
PT5503
Orderno.
PT5604
AMP connector
PT5603
Orderno.
PT5704
DEUTSCH connector
M12 connector AMP connector DEUTSCH connector
PT5703
L+BN1
WH2 OUT
Type PT55
1
2
3OUT
L +
L -
Type PU56
A
B OUT
+L A
C
BOUT
L -
L +L +
Type PU57Type PT57
1
3 L +
OUT
Type PT56
–
–
–
–
–
–
50
Process sensors
Hydrostatic levelmeasurement for a wide range ofapplicationsPressure sensors
High-grade stainless steel submersible pressure transmitter with PUR or FEP cable for high resistance to media
Version with ATEX approval for group I cat. M1 and group IIcat. 1G and 1D.
Good overall accuracy and long-term stability
Pressure compensation via internally vented cable
Application areasThe PS series submersible pressure transmitters are used for level measurement in containers, tanks, wells, flowing water, bore holes and wastewater plants. The accuracy of 0.5 % and the long-term stability of0.2 % per year contribute to the reliable operation of the transmitter.
Robust, reliable and flexibleAll submersible pressure transmitters have a robust high-grade stainlesssteel housing. For standard applications the favourably priced PUR cablecan be used. For applications where a high resistance to media is requested(e.g. slurry, oils or fuels) the FEP cable is available. The ATEX submersible pressure transmitters of the PS3xxA series are designed for level measurement in areas subject to explosion. The sensorscan be used in zone 0, 1, 2 or zone 20, 21, 22 as well as in mining. The GL approval allows an application in the maritime sector.
51
(04.2016)
For further technical details please visit: www.ifm.com
Splitter box *with vent and terminal block E30401
Additional weight, approx. 500 g E30402
Filter element * E30400
Cable fixing clamps * E30399
Submersible pressure transmitters with PUR cable for standard applications
0.6
0.6
0.6
4
4
4
1000 N
1000 N
1000 N
Measuring rangeRelative pressure
[bar]
ApprovalsCE / EX / GL
Overload pressure
[bar]
Pull force cable
1
1
5
5
1000 N
1000 N
Cable length
[m]
PS3407
PS3427
PS3607
Orderno.
PS3417
PS3617
0.25 2 1000 N
10
15
30
15
30
5
• / – / –
• / – / –
• / – / –
• / – / –
• / – / –
• / – / – PS3208
Operating voltage [V DC] 18...30
Analogue output [mA] 4...20
Accuracy / deviation(in % of the span)Accuracy (BFSL)Accuracy incl. non-linearityNon-linearity (BFSL)Long-term stability per year
≤ 0.25 (PS3: 0.5)≤ 0.5 (PS3: 1)
≤ 0.2≤ 0.2
Design PS3Ambient temperature / [°C]Medium temperature
-10...50
Design PS4Ambient temperature / [°C]Medium temperature
-10...85
Design PS3 ATEX approvalAmbient temperature / [°C]Medium temperature
1G, 1/2G, 2G:T6 -10...60, T5: -10...80,
T4: -10...851D, 1/2D, 2D:
-10...40 (750 mW) / -10...70 (650 mW) / -
10...85 (550 mW)
Housing material High-grade stainless steel (316Ti / 1.4571)
Further technical data
Accessories
Type Description Orderno.
* use only outside the hazardous area
Submersible pressure transmitters with FEP cable for high resistance to media
0.6
1
3
5
500 N
500 N
PS4407
PS4417
0.25 2 500 N
10
15
5
• / – / –
• / – / –
• / – / – PS4208
Submersible pressure transmitters with FEP cable for hazardous areas
0.6
1
4
5
500 N
500 N
PS307A
PS317A
0.25 2 500 N
10
15
5
• / • / •
• / • / •
• / • / • PS308A
Temperature coefficients (TEMPCO)(in % of the span per 10 K)Greatest TEMPCO of zeroGreatest TEMPCO of the span
≤ 0.2≤ 0.2
100
27
Example PS3208
Dimensions
0.6
1
3
5
500 N
500 N
PS4506
PS4607
0.25 2 500 N
20
30
10
• / – / –
• / – / –
• / – / – PS4408
52
Process sensors
New PT absolutepressure transmitterwith different measuring rangesPressure sensors
Measuring range 0...1/1.6/4/10 bar absolute and analogueoutput 4...20 mA
Robust stainless steel measuring cell
Slim, compact design with G 1/4 process connection
Measuring accuracy ≤ 0.8 %, repeatability ≤ 0.1 %
Easy connection via M12 connector
Absolute pressure sensorsAs of now, ifm has added absolute pressure sensors to its versatile portfolioin the pressure sensor range. The new PT05 series with robust metal measuring cell, G 1/4 process connection, M12 connector and analogueoutput is available in the common pressure ranges up to 10 bar.
Operating principleAbsolute pressure sensors operate independently of the surrounding airpressure; that is what distinguishes them from sensors working on a relative measurement principle. The measurement is not influenced by weather-and altitude-related fluctuations of air pressure. This is often a decisive factor in vacuum applications, which require a fine pressure control.Absolute pressure sensors do not require ventilation, therefore incorrectmeasurement due to a blocked exhaust is impossible.In the field of pressure sensors the new units stand out as specialists for”specific duties“.
53
(04.2016)
For further technical details please visit: www.ifm.com
Accessories
Type Description Order no.
Operating voltage [V DC] 8...30
Common technical data
Medium temperature [°C] 0...80
Materials (wetted parts)NBR,
high-grade stainless steel(316L/1.4404)
Protection IP 67
Step response time [ms] 4
Reverse polarity protection •
Adapter; G 1/4 - G 1/2, high-grade stainless steel (316Ti/1.4571) E30135
Measuring range
[bar]
Poverloadmax.[bar]
Pburstmin.[bar]
Order no.
Output function 4...20 mA
0...1 5 PT0507
0...1.6 10 PT0517
0...4 25 PT0505
0...10 50 PT0504
Accuracy / deviation(in % of the span)Linearity errorLinearityRepeatabilityTemperature error in the temperature range 0...80 °C
< ± 1.0< ± 0.5 BFSL / < ± 1.0 LS
< ± 0.1< ± 2.5 %
Connection technology
Type Description Order no.
M12 socket,2 m black, PUR cable EVC001
M12 socket,5 m black, PUR cable EVC002
M12 socket,2 m black, PUR cable EVC004
M12 socket,5 m black, PUR cable EVC005
L+BN1
WH2 OUT
Wiring diagram
Dimensions
1447 58
,8G¼
29M12 x1
27
1
1) Sealing
2
3.2
8
20
54
Process sensors
IO-Link display: process values at a glance
IO-Link display
Four measured values / text displays and four messagewindows for free text
Colour change for text andbackground
Flexible adaptation of the display, also during operation
IO-Link 1.1 compatible
Easy integration into each IO-Link structure
More plant transparencyThe IO-Link display is a flexible solution to display process values, texts and messages in a plant. It displays up to four assigned process values,alarms and warnings. Clear text and as an option a colour change of textand background can be used for a quick overview. By means of buttons the user can trigger control actions of the PLC or acknowledge messages.
Easy integrationThe IO-Link display is connected to an IO-Link master and controlled viaPLC. No special software is required for configuration. Texts and settings can be predetermined via an IO-Link device tool such asLINERECORDER SENSOR. Texts and settings can be adapted even duringoperation via the PLC.
55
(04.2016)
For further technical details please visit: www.ifm.com
Resolution pixels
Display type Displayillumination
Orderno.
1.44" colour display
128 x 128 TFT LED E30391
Wiring
Dimensions
Technical data
IO-Link displayE30391
Operating voltage [V DC] 18...30
Current consumption [mA] < 47
Protection rating / protection class
IP 65, IP 67 / III
Reverse polarity protection •
Ambient temperature [°C] 0...60
EMC EN 61000-6-2 EN 61000-6-4
Shock resistance [g] 20 (11 ms)
Vibration resistance [g] 20 (10...50 Hz)
Housing materials
Stainless steel (303/1.4305); PC; PBT-GF 30;
PPS; PA 6.6; FKM
Connection M12 connector
Communication interfaceIO-Link deviceType of transmissionIO-Link revisionSDCI standard
COM2 (38.4 kbaud)1.1
IEC 61131-9
Connection technology
Type Description Orderno.
M12 jumper1 m black, PUR cable EVC042
M12 jumper2 m black, PUR cable EVC043
M12 jumper, 3 m black, PUR cable EVC102
M12 jumper, 5 m black, PUR cable EVC044
M12 jumper, 10 m black, PUR cable EVC493
BN1
BK4
BU3
L+
L
OUT
45 34
86
101
39,5
11M
12x1
Accessories
Type Description Orderno.
DIN rail clip,PA; 1.4567 (V2A) E30429
56
Process sensors
Calorimetric flowmeter for liquids and gases
Flow sensors / flow meters
Optimised for water, oils, glycol and air
Fast response time and integrated temperature measurement
Red/green colour change forprocess values
Internal pipe diameter selectable from 15...400 mm
The process connection can berotated for optimum alignment
Measurement techniqueThe SA volumetric flow sensor operates using the calorimetric measuringprinciple. Measuring elements as well as a heat source are located on themeasuring tip. The physical effect that a flowing medium absorbs heatenergy and conducts it away is used. The resulting temperature change isan indication of flow.
Device functionThe new SA-type sensor has been designed to detect and measure flowand temperature even in large internal pipe diameters up to 400 mm.A serial number on the device enables unambiguous traceability.Therefore it serves different applications. Switching outputs, analogue signals and IO-Link provide various options to further process the signals.That means that the user is best-equipped for Industry 4.0.
57
(04.2016)
For further technical details please visit: www.ifm.com
Common technical data
Operating voltage [V] 18...30 DC
Current consumption [mA] < 100
Current rating [mA] 250
Housing materials
High grade stainless steel (1.4404/316L);
PBT-GF 20; PBT-GF 30
Connection M12 connector
Accuracy temperature measurement ± 0.3 K
TypeSA
Protection rating, protection class IP 65 / IP 67, III
BN
WH
BK
BU
4
1
3
2 OUT2
L+
L
OUT1
Wiring
Measuring rangeliquid / gaseous
[cm/s]
Mediumtemperature
[°C]
Response time[s]
Orderno.
M12 connector · electrical design DC PNP
5...300 / 200...10000 -20...90 0.5 SA5000
Probe length
[mm]
45
5...300 / 200...10000 -20...100 0.5 SA4100100
5...300 / 200...10000 -20...100 0.5 SA4300200
Pressure resistance
[bar]
100
50
50
Type
M18
Progressive ring
Progressive ring
Connection technology
Type Description Orderno.
M12 socket,2 m black, PUR cable EVC001
M12 socket,5 m black, PUR cable EVC002
M12 socket,2 m black, PUR cable EVC004
M12 socket,5 m black, PUR cable EVC005
M12 socket,2 m orange, PVC cable EVT064
M12 socket,5 m orange, PVC cable EVT001
Accuracy flow measurement
± (5 % MW + 2 % VMR) at referenceconditions
Accessories
Type Description Orderno.
Progressive ring fitting G 1/2, flat seal E40258
Progressive ring fitting G 1/4, flat seal E40259
Progressive ring fitting G 3/4, flat seal E40260
USB IO-Link master for parameter settingand analysis of unitsSupported communication protocols: IO-Link (4.8, 38.4 and 230 Kbits/s)
E30390
Progressive ring fitting 1/2 NPT E40261
Progressive ring fitting 1/4 NPT E40262
Progressive ring fitting R 1/2 E40263
Progressive ring fitting R 1/4 E40264
Progressive ring fitting for SL mounting adapter E40269
Protective cover for fluid sensors with M12 connector,polypropylene homopolymer
E30420
Welding adapter for cutting ring E40265
Flow adapter E40434
Progressive ring fitting G 1/2, metal to metal seal E40267
Progressive ring fitting G 3/4 metal to metal seal E40268
58
Process sensors
Two temperaturesensors in one
Temperature sensors
Two in one: process values plus two switched outputs
Measuring range -50...150 °C
IO-Link for simple, remote setting
Extremely high accuracy of +/- 0.3 K
Tamper-proof
Flexible in useThe functionality of the temperature sensor TV is impressive. Due to its extremely compact design the TV sensor can be installed where space is ata premium. The device has two switch points, operates with an extremelyhigh precision and can be set easily and quickly via the LINERECORDERSENSOR.
Efficient and reliable thanks to IO-LinkThanks to IO-Link the new temperature sensor continuously transmits process values and other important data, e.g. min. / max. temperature. Moreover, the digital measurement results are more accurate because thereare no conversion losses by D/A converters or external influences (e.g. cablelengths). Devices with preset measuring ranges (analogue start and endpoints) are no longer needed because the real process value is transmitted.This reduces stock. Soon conventional transmitters will be a thing of the past.
59
(11.2016)
For further technical details please visit: www.ifm.com
IO-Link interface for parameter settingand analysis of units with DTM specification, current consumptionfrom USB port: max. 500 mA
E30396
Memory plug, parameter memoryfor IO-Link sensors E30398
LINERECORDER SENSOR,software for parameter setting and setting up IO-Link sensors
QA0001
IO-Link accessories
Type Description Orderno.
Connection technology
Type Description Orderno.
Socket, M12,2 m black, PUR cable EVC001
Socket, M12,5 m black, PUR cable EVC002
Socket, M12,2 m black, PUR cable EVC004
Socket, M12,5 m black, PUR cable EVC005
Operating voltage [V DC] 18...32
Protection ratingprotection class
IP 69K,lll
Materials wetted parts high-grade stainless steel(316L/1.4404)
Further technical data
Reverse polarity / overload protection • / •
Dynamic response T05 / T09 1 s / 3 s
Accuracy [K] ± 0.3
Measuring range [°C] -50...150
Ambient temperature [°C] -25...80
IO-Link revision 1.1
Dimensions
Wiring diagram
Example TV7105
Example TV7603
Installationlength[mm]
Orderno.
Pressure rating
[bar]
Output function 2 x NO / NC programmable, measuring range -50...150 °C
25 400
30 300
25 400
30
Processconnection
G 1/4
G 1/2
1/4" NPT
1/2" NPT 300
TV7105
TV7405
TV7603
TV7303
Example TV7105
6
M12
x118
,7
15,9 48
19
13
G ¼
25
BN
WH
BK
BU
4
1
3
2 OUT2
L+
L
OUT1
6
M12
x118
,7
15,9 4871
19 ¼" NPT
25
60
Process sensors
Temperature sensorwith easy dial setting
Temperature sensors
Measuring range -25...140 °C
Two switching outputs
Easy adjustment via two settingrings for optimum read-out
Mechanical lock to prevent accidental adjustment
Accuracy: ± 3 K
Convenient and reliable settingThe TK type temperature sensors are sensors to monitor liquids and gaseswith switch points that can be set intuitively via two radial setting rings.Wherever simple solutions are needed, the TK series sensors are a real alternative. Complicated parameter setting via software is not necessary.The requested temperature is set via the setting rings allowing optimumread-out without your installation having to be in operation. In addition,the switching states are clearly displayed via LEDs.
VersionsThe sensors are available with a setpoint and a reset point (TK6xxx) or two switch points with a fixed hysteresis (TK7xxx). The TK series temperature sensors are always the optimum choice for quick and simple use.
61
(11.2016)
For further technical details please visit: www.ifm.com
Dimensions
M12
x127
6
G ¼
5950
12
27LED
Example TK6110
Dynamic response T05 / T09 [s] 1 / 3
AccuracySetting accuracy [K]Temperature influence (per 10 K)Repeatability [K]
± 30.1
± 0.1
Ambient temperature [°C] -40...70
Shock resistance 50 g
Vibration resistance 20 g
Housing materials
high-grade stainless steel(316L/1.4404), PC (Makrolon),
PBT (Pocan), FPM (Viton)
Materials wetted partshigh-grade stainless steel
(316L/1.4404), FPM (Viton)
Connection M12 connector
Protection rating, protection class IP 67 / III
Operating voltage [V DC] 9.6...32
Current rating [mA] 500
Further technical data
Measuring range
[°C / °F]
Orderno.
M12 connector, gold-plated contacts · output function normally open / normally closed complementary
TK6110-25…140 / -13...284
Process connection
G 1/4
Installation length
[mm]
50
Switching hysteresis
[K]
adjustable
Pressure rating
[bar]
400
TK6310-25…140 / -13...284 1/4 NPT 50 adjustable 400
M12 connector, gold-plated contacts · output function 2 x normally open
TK7110-25…140 / -13...284 G 1/4 50 5 (fixed) 400
M12 connector, gold-plated contacts · output function 1 x normally open / 1 x normally closed
TK7460-25…140 / -13...284 G 1/2 250 5 (fixed) 300
Adapter, G 1/4 – G 1/2high-grade stainless steel (316Ti/1.4571)
E30135
Protective cover with lead seal option for TK type temperature sensors, PP transparent
E30094
Accessories
Type Description Orderno.
Flange adapter G1/4,stainless steel (303/1.4305) E30063
Thermowells
G 1/4 E377002750
Screw-in thermowell, process connection G 1/4
G 1/2 E37640224250
Screw-in thermowell, process connection G 1/2
Device connection Installation length [mm]
Sensor Thermowell
Orderno.
Connection technology
Type Description Orderno.
Socket, M12,2 m black, PUR cable EVC001
Socket, M12,5 m black, PUR cable EVC002
Socket, M12,2 m black, PUR cable EVC004
Socket, M12,5 m black, PUR cable EVC005
Socket, M12,2 m black, PUR cable, LED EVC007
Socket, M12,5 m black, PUR cable, LED EVC008
62
Temperature sensors
TN sensor with integrated processconnection and eva-luation electronics
Measuring range of -50...150 °C, response time T05 / T09 = 1s / 3s.
Clearly indicates the acceptableranges: programmable red / green display
Integrated process connections: G 1/2, G 1/4, 1/2 NPT, 1/4 NPT,M18 x 1.5
2 switching outputs or 1 switching and 1 analogue output (4...20 mA or 0...10 V)
Visualisation of the switchingstates by clearly visible LEDs
Extremely fast, robust and flexibleThe compact TN type temperature sensors are distinguished by excellent response times, high pressure resistance and integrated process connections. The sensors easily resist applications with temperatures up to 150 °C andhigh pressure loads up to 400 bar. The measuring range is freely scalable.
Updating a classicWhat is new is the quick and easy handling via three pushbuttons. The display can be switched from the indication of ”red“ to an alternatingindication of “red - green“. So, switching states can be highlighted or an independent colour windowcan be created. The sensor head can be rotated and offers optimum readability from any position. Thanks to captive laser labelling on the stainless steel housing, the units can still be identified after years.
Process sensors
63
(04.2016)
For further technical details please visit: www.ifm.com
Adapter, M18 x 1.5 - G 1/2High-grade stainless steel (316L/1.4404) E40096
Protective cover for fluid sensors with M12 connector,polypropylene homopolymer
E30420
Accessories
Type Description Orderno.
Accuracy [K] ± 0.3 + (± 0.1 % MS)
Electrical design PNP / NPN
Protection IP 67
Communication interface IO-Link
Resolution display [K] 0.1
Operating voltage [V] 18...32 DC
Current rating [mA] 250
Further technical data
IO-Link interface for parameter settingand analysis of units with DTM specification, current consumptionfrom USB port: max. 500 mA
E30396
Memory plug, parameter memoryfor IO-Link sensors E30398
LINERECORDER SENSOR,software for parameter setting and setting up IO-Link sensors
QA0001
IO-Link accessories
Type Description Orderno.
USB IO-Link master for parameter settingand analysis of unitsSupported communication protocols: IO-Link (4.8, 38.4 and 230 Kbits/s)
E30390
1) LEDs (display unit / switching status), 2) 4-digit alphanumeric display / alternating indication of red and green, 3) Programming buttons, 4) Upper part of the housing can be rotated by 345°
Installation length
[mm]
Pressure resistance
[bar]
300 45
Measuring range
[°C]
Factory setting
[°C]
Orderno.
Output function 1 x NO / NC programmable · 1 x analogue output 4…20 mA or 0…10 V programmable
-50...150 -40...150
Process connection
M18 x 1.5 I TN2511
300 45
Output function 2 x NO / NC programmable
-50...150 -40...150M18 x 1.5 I TN7511
300 30 -50...150G 1/2 TN2405
300 50 -50...150G 1/2 TN2415
160 100 -50...150G 1/2 TN2435
160 150 -50...150G 1/2 TN2445
300 30 -50...1501/2" NPT TN2303
300 50 -50...1501/2" NPT TN2313
160 100 -50...1501/2" NPT TN2333
160 150 -50...1501/2" NPT TN2343
400 25 -50...150G 1/4 TN2105
400 50 -50...150G 1/4 TN2115
400 25 -50...1501/4" NPT TN2603
400 50 -50...150
-50...150
-50...150
-50...150
-50...150
-50...150
-50...150
-50...150
-50...150
-50...150
-50...150
-50...150
-50...1501/4" NPT TN2613
Output function 2 x NO / NC programmable or 1 x NO / NC + 1 x analogue (4...20 mA / 0...10 V; scalable)
Response dynamics T05 / T09 [s] 1 / 3
Thermowell for temperature sensors,Ø 6 mm,high-grade stainless steel (316L/1.4404)
E37610
Dimensions
48
M12
x1
22 EL
11
41
34
8012
1
4
3
2
1
G ¼
6
Example 2105
64
Temperature sensors
Temperature sensors withDEUTSCH, AMP orM12 connector
Miniaturisation for mobile applicationsThe DEUTSCH, AMP or M12 connectors of the new TA/TU/TM temperaturesensors allow fast and easy installation in mobile machines. Their extremely compact housing ensures that the sensors are particularlysuited for use in applications where space is limited.
Areas of applicationThe sensors of type TA/TU/TM are suited for mobile applications and especially for hydraulic and pneumatic applications with high operatingpressure. The high vibration and shock resistance, the high protection rating, the excellent EMC resistance and the E1 conformity make the TA/TU/TM sensors particularly suitable for use in mobile machines.
Process sensors
Compact design with G 1/4 process connection
Fast response time: T05 / T09 = 1 s / 3 s
Installation depths of 25...200 mm
Measuring range -50...150 °C
Robust due to welded stainlesssteel housing
65
(04.2016)
For further technical details please visit: www.ifm.com
Installation length
[mm]
Order no.
Factory setting
Connector
G 1/4 process connectionAnalogue output 4...20 mA
25 M12
50 M12
200 M12
25 DEUTSCH
G 1/4 process connectionAnalogue output 0.5...4.5 V
25 M12
25 DEUTSCH
25 AMP
Operating voltage [V DC]Type TA 10...30
Operating voltage [V DC]Type TU 8...32
Protection rating IP 68, IP 69K / lll
Materials in contact with the medium
High-grade stainless steel(316L/1.4404)
Further technical data
Reverse polarity / overload protection • / •
Response dynamics T05 / T09 1 s / 3 s
Ambient temperature [°C] -40...100
EMC DIN EN 61000-6-2DIN EN 61000-6-3
Dimensions
TA3105
TA3115
TA3155
TA4105
50 DEUTSCH TA4115
25 AMP TA5105
50 AMP TA5115
TU3105
TU4105
TU5105
-50...150 °C
-50...150 °C
G 1/4 process connectionPt1000, class A
25 M12
25 DEUTSCH
TM5101
TM6101
-40...150 °C
1/4" NPT process connectionAnalogue output 4...20 mA
50 M12
50 M12
TA3313
TA3317
0...300 °F / 0...100 °C
Wiring
M12
x118
,8
6
55,3 13EL
19 G ¼
TA3121
,8
6
25,4
EL1359,6
19 G ¼
TA41
25,8
6
EL1359,8
19 G ¼
21,8
TA51
L+BN1
WH2 OUT
BN1
WH2
BU3
L+
L
OUT
TU31TA31
A
C
BOUT
L -
L +L +TU41
1
3 L +
OUT 1
2
3OUT
L +
L -TU51TA51
A
B OUT
+L
TA41
66
Industrial communication
DataLine SmartPLC:flexible automationsystem
AS-Interface controllers / gateways
Quick and easy set-up
Flexible and future-proofthanks to connective hardwareand CODESYS V3
Various protocols on differentinterfaces
Designed for Industry 4.0 applications
Unbeatable price / performanceratio
Communicative PLCThe DataLine SmartPLC is freely programmable via CODESYS V3 and offers full access to all interfaces of the system. Two Ethernet ports act as EtherCAT fieldbus / slave interface and enable high-performance com-munication to other PLC systems. Different communication protocols canbe used in parallel via two further Ethernet ports, e.g. EtherCAT master,EtherNet/IP scanner, Modbus TCP master and slave, TCP/IP, UDP/IP orOPC/UA server.
Designed for Industry 4.0The DataLine SmartPLC is best-equipped for Industry 4.0 applications. Towards the PLC, it acts like a classic AS-i gateway and towards IT, any pro-cess values can be made available via different communication protocols.An integrated real-time clock and an SD card slot complete the features.
67
(11.2016)
For further technical details please visit: www.ifm.com
Products
Orderno.
SmartSPS DataLine, 1 x AS-i, EtherCAT slave AC1433
SmartSPS DataLine, 2 x AS-i, EtherCAT slave AC1434
Dimensions
106,293
135,
512
8,2
Example AC1433
Description
DataLine SmartPLC
Advantages and customer benefits
Communication interfaces:
EtherCAT:Certified EtherCAT functionality
AS-Interface:1 and 2 AS-i masters pursuant to M4 profile
Configuration interface: 2 Ethernet ports with the following functions:– Web server– CODESYS V3 programming interface– Multifunctional communication interface (EtherCAT master, Modbus TCP, EtherNet/IP scanner, OPC/UA server, Web visualisation)
Connections:– AS-i and auxiliary supply: plug-in terminals (supplied with the unit)– EtherCAT 2 x RJ45– Configuration interface 2x RJ45
FunctionsThe DataLine SmartPLC supports a number of differentcommunication protocols via its both configuration interfaces in order to supply additional input / outputdata to the integrated PLC or realise a data exchangewith other units / systems. For Industry 4.0 applications, there is, amongst others,an OPC server functionality available that enables aneasy data transfer into your IT world.
68
AS-Interface cable extensions
Repeater to extendAS-i networks up to 1000 m
Increased operating temperature range -25...70 °C
Reliable long term performance in tough conditions
Fast data transfer for Safety at Work
Clearly visible diagnostic LEDs
Plug-in connection terminals
OperationRepeaters are used for AS-Interface to enable the network cable run to beextended beyond 100 m. Galvanic separation of network segments and independent voltage suppliesensure stability. The 62 participants are provided with a higher total currentand the voltage drop decreases.
Features of the unitThe improved performance is packed into the new SmartLine housing.While conventional repeaters usually have a temperature range from 0...55 °C, the new unit from ifm operates reliably across a broad rangefrom -25...70 °C. The improved operating temperature range makes the new unit from ifm a class leader. This results in a longer life time thus saving time and money.
Industrial communication
69
(04.2016)
For further technical details please visit: www.ifm.com
Products
Protection IP 20, Combicon connectors AC3225
Total current consumption [mA]via AS-i 2 x 60
Ambient temperature [°C] -25...70
Housing material PA 6.6
SmartLine AS-i repeaterAC3225
Technical data
SmartLine AS-i repeater
Orderno.
Description
Dimensions
10825,493 12
5,7
1
LED
2
3
35,5
1) plug with cage clamp connection2) panel for labelling3) Din rail adapter
Operating voltage [V DC] 26.5...31.6
AS-i power supply 115/230 V AC,output current (AS-i) 2.8 A AC1256
AS-i power supply 115/230 V AC,output current (AS-i) 8 A AC1258
Accessories
Orderno.
Type Description
70
Industrial communication
SafeLine SmartPLC:fail-safe automationsystem
AS-Interface Safety at Work
Quick and easy set-up
Flexible and future-proofthanks to connective hardwareand CODESYS V3
High machine uptime due to sophisticated diagnostics
Safe up to SIL 3, PL e
Unbeatable price / performance ratio
All-in-one: more than just a PLCJust as a smartphone is more than just a phone, the new SmartPLC is morethan just a simple PLC. It has the flexibility for different tasks, even in safety-related applications up to SIL 3, PL e. For example as:– fail-safe PLC– standard PLC– AS-i gateway– visualisation system– protocol converter– data logger– intelligent evaluation unit (ifm system solutions)Two integrated PLCs (1 x fail-safe, 1 x standard), powerful processors, alarge memory and a multitude of supported protocols allow the control ofsophisticated systems – and this at an unbeatable price!
71
(11.2016)
Products
Orderno.
SmartSPS SafeLine, 2 x AS-i, Profinet-Device AC402S
SmartSPS SafeLine, 2 x AS-i, Profibus-Slave AC412S
SmartSPS SafeLine, 2 x AS-i, EtherNet/IP-Device AC422S
Dimensions
106,293
135,
512
8,2
Type Description
SmartSPS SafeLine
Accessories
Orderno.
AS-i data decoupling module AC1250
Type Description
Safe PLCCertified up to SIL3, PL e. Eight safe local inputs andfour safe local outputs. Convenient diagnostic functions, include status indication for safe I/Os and error memorywith time stamp for up to 2,000 messages.Programming is done via CODESYS V3. The auto-teachfunction simplifies the replacement of slaves.
Standard PLCThe PLC can be freely programmed using CODESYS V3.Its software and hardware operates independently ofthe fail-safe PLC, but it can of course communicatewith it and exchange data. The PLC has access to all interfaces of the system.
AS-i gatewayWithout programming, the SmartPLC can be used directly as a gateway for AS-i on the one side, and Profinet, Profibus, or EtherNet/IP on the other side. Theintegrated display and the convenient web interfacedisplay all the available status information for the userand support diagnostics in case of a fault.
Data loggerOperational system data can be recorded via AS-i, Modbus TCP, Profinet, EtherNet/IP, Profibus, TCP/IP,UDP/IP and stored on the SD card or in the internalflash memory. If needed, the integrated real-time clock provides atime stamp for each recorded data block. This simplifiesthe documentation and diagnostics of processes.
Visualisation systemA freely programmable web visualisation based onHTML5 provides maximum transparency. An internetbrowser with HTML5 capability is sufficient on the finalunit (PC, tablet, smartphone). No further software is required. Even the full graphic display of the SmartPLCis freely programmable for visualisation tasks.
Protocol converterConnect your sensors and Ethernet based devices toyour fieldbus: The SmartPLC can be used as protocolconverter between Profinet, Profibus, EtherNet/IP onthe one side and AS-i, Modbus TCP, TCP/IP, UDP/IP onthe other side.
All-in-oneThe new SmartPLC combines two separate PLCs in one compact housing. While the one PLC solves safety-related applications, the second PLC either works as astandard PLC or as platform for other tasks. Both PLCs communicate with each other, so that entireplant controls can be implemented including safetyfunctions and visualisations with only one SmartPLC.
For further technical details please visit: www.ifm.com
72
Industrial communication
4-port IO-Link master: intelligentconnection of sensorsIO-Link master
4 IO-Link ports with full V1.1functionality, COM1, COM2,COM3 and SIO mode
Master and devices configurablevia the LR DEVICE software
2 Ethernet ports 10/100 Mbits/swith switch for Profinet
SAP ready via LR AGENT EMBEDDED
Voltage supply via standardsensor cable, M12 A-coded
Robust field bus modules with safe connectionifm’s new IO-Link masters are the perfect choice, even for the most difficultenvironments: the materials and production methods are identical to theifm jumper cables of the tried-and-tested EVC product series. The ecolinktechnology guarantees reliable, permanently ingress-resistant M12 connec-tions of the connection cables.
Energy limitation for UL class 2 unitsMany sensors require an energy-limited supply with UL class 2 approval.The limitation of energy is usually achieved via a corresponding power supply. With the AL1100 IO-Link master, sensors can be supplied accordingto UL class 2 without using an energy-limited power supply approved according to UL class 2.
73
(11.2016)
For further technical details please visit: www.ifm.com
Dimensions
LED
M12
M12
26
31,638,4
152
136
59,3
5,3
Advantages and customer benefits
• Configuration of sensors with LR DEVICE
The intuitive software finds all IO-Link masters in theEthernet network and creates an overview of thewhole plant. Besides, all sensors connected are in-dicated with the respective parameters. This meansthat parameter setting of all sensors in the system ispossible from one central point.
• Easy sensor connectionThe sensors and actuators are connected via standardM12 connection cables without screening. Up to 4 IO-Link sensors can be connected and be suppliedwith up to 3.6 A. With the EVC693 accessories, additional auxiliary supply for the connection of IO-Link actuators can be supplied.The cable can be up to 20 m long.
• Reliable digital dataThe sensor data is transferred digitally. Unlike analoguesignals, contact resistance and EMC interference cannot corrupt the signals.
• Direct connection to the ITThe integrated LR AGENT EMBEDDED is capable of transmitting the process values directly to ERP systems, without detour via the PLC. This second communication path is available in parallelto PROFINET via the bus wiring.
Products
Protection rating IP 65 / IP 67, I/O modules for field applications AL1100
Total current consumption [A] ≤ 3.9
IO-Link version 1.1
Number of IO-Link ports 4
Number of binary inputs 4 + 4 (IO-Link in SIO mode)
Number of binary inputs 4 (IO-Link in SIO mode)
Parameter memory •
Current for all ports [A](device supply) ≤ 3.6
Ambient temperature [°C] -25...60
Housing materialsPolyamide;
socket: nickel-plated brass
4-port IO-Link masterAL1100
Technical data
IO-Link master with PROFINET interface
Orderno.
Description
Operating voltage [V DC] 20...30
Connection technology
Description Orderno.
M12 Y-splitter,1 m black, PUR cable EVC693
M12 Y-splitter,2 m black, PUR cable EVC694
M12 Y-splitter,5 m black, PUR cable EVC695
M12 Y-splitter,10 m black, PUR cable EVC696
74
Software framework LINERECORDER
LR DEVICE Parameter settingsoftware via IO-LinkmasterParameter setting software
Easy and fast IO-Link masterparameter setting
Clear representation
Easy and fast deviceparameter setting (point-to-multipoint connection)
Transferable parameter sets
Features• Online and offline parameter setting • Supports all IO-Link devices• Software and parameter description in all supported languages• Detailed description texts of all parameter contents• Parameter sets grouped according to topics• Parameter setting of IO-Link master (AL11XX-series)• Supports the latest ifm IO-Link devices• Supports IO-Link actuators• Parameter setting of devices via networkCustomer benefits• Optimised by means of graphic visualisation of the process values• Shortened set-up time• Optimised device replacement process• Paperless recording of parameter sets
Automaticinstallation
ERPconnec-
tivity
Trace-ability
Point-to-multipointparameter
setting
75
(11.2016)
For further technical details please visit: www.ifm.com
Graphic representation of the process values• Graphic comparison of process values with each other and with switching outputs• Simple, clear representation of the process values• Export of the process values to the table
Documentation and archiving • Save / load parameter sets • Archive parameter sets as PDF file
Device detection• Automatic identification of IO-Link masters and the connected IO-Link sensors / actuators• Automatic identification of the ifm IO-Link sensors• Display of the characteristic sensor values• Save correct parameter transfer by recognising non-compatible devices• Particularly easy adding of new and updated IODD files
Features• Parameter setting of IO-Link masters and IO-Link devices via network• Simultaneous writing of parameters to multiple devices at the same time• Help texts and value limits support parameter entry at the input stage• Operational reliability by device detecton and restoration of default values• Display of the IO-Link communication quality• Create and display equipment identification (application-specific tag)• Add and update existing ifm IODDs with a mouse click *)*) if internet connection available
Further processing of the sensor values with thefreely scalable LINERECORDER modulesThe software framework LINERECORDER closes the in-formation circuit from the sensor signal to the world ofME systems and ERP solutions (e.g. SAP).
From sensor to ERP
Description Orderno.
Technical data
LR DEVICE(supplied on USB flash drive)Software for online and offline parameter settingof IO-Link sensors and actuators
QA0011
LR DEVICE(Download)Software for online and offline parameter settingof IO-Link sensors and actuators
QA0012
Parameter setting App
System requirements:– Windows XP SP3, Windows Vista SP2, Windows 7 SP1, Windows 8, Windows Server 2008 SP2, Windows Server 2008 R2 SP1, Windows Server 2012, Windows 10– CPU Intel Dual Core 2.0 GHz– 2 GB RAM– 5 GB free hard disk space– Web browser Chrome, Firefox, Internet Explorer 11, Microsoft Edge
76
Software framework LINERECORDER
LR SENSORParameter setting soft-ware, point-to-point,for IO-Link devicesParameter setting software
Automatic identification of connected IO-Link sensors andactuators
Clear representation
Easy and fast device parameter setting (point-to-point connection)
Transferable parameter sets
Features• Online and offline parameter setting • Supports all IO-Link devices• Software and parameter description in all supported languages• Detailed description texts of all parameter contents• Parameter sets grouped according to topics• Supports the latest ifm IO-Link devices• Supports IO-Link actuators
Customer benefits• Optimised by means of graphic visualisation of the process values• Shortened set-up time• Optimised device replacement process• Paperless recording of parameter sets
ERPconnec-
tivity
Trace-ability
Automaticinstallation
Point-to-point
parametersetting
77
(11.2016)
For further technical details please visit: www.ifm.com
Graphic representation of the process values• Graphic comparison of process values with each other and with switching outputs• Simple, clear representation of the process values• Export of the process values to the table
Documentation and archiving • Save / load parameter sets • Archive parameter sets as PDF file
Device detection• Automatic identification of the ifm IO-Link sensors• Display of the characteristic sensor values• Save correct parameter transfer by recognising non-compatible devices• Particularly easy adding of new and updated IODD files
Features• Help texts and value limits support parameter entry at the input stage• Operational reliability by device detecton and restoration of default values• Display of the IO-Link communication quality• Create and display equipment identification (application-specific tag)• Add and update existing ifm IODDs with a mouse click *)*) if internet connection available
Further processing of the sensor values with thefreely scalable LINERECORDER modulesThe software framework LINERECORDER closes the in-formation circuit from the sensor signal to the world ofME systems and ERP solutions (e.g. SAP).
From sensor to ERP
Description Orderno.
Technical data
LR SENSOR(supplied on USB flash drive)Software for online and offline parameter settingof IO-Link sensors and actuators via USB adapter
QA0001
LR SENSOR(Download)Software for online and offline parameter settingof IO-Link sensors and actuators via USB adapter
QA0002
Parameter setting App
System requirements:– Windows XP SP3, Windows Vista SP2, Windows 7 SP1, Windows 8, Windows Server 2008 SP2, Windows Server 2008 R2 SP1, Windows Server 2012, Windows 10– CPU Intel Dual Core 2.0 GHz– 2 GB RAM– 5 GB free hard disk space– Web browser Chrome, Firefox, Internet Explorer 11, Microsoft Edge
78
RFID 125 kHz / RFID 13,56 MHz
RFID evaluation system DTE withEtherCAT
RFID DTE103 with web serverfor device setup, diagnosis andmonitoring
Robust RFID antennas in different designs
Increased range through optional antenna adapters
Connection of RFID antennas,sensors or actuators
Simple connection of the antennas via standard cables up to 20 m
Always know what’s going onifm RFID systems are optimised for quality assurance and production control,e.g. for identifying tools or monitoring production steps.What used to be written in the documents accompanying the goods is nowstored on electronic transponders. Advantage: the information cannot getlost and is available at any time and anywhere.
New: DTE103 evaluation unit with EtherCATEtherCAT is the fastest Ethernet technology with exceptional performance.The free network topology flexibly adapts to the plant structure. Switchesand hubs are not required. This saves costs.The devices can be exchanged during operation. This ensures a high plant uptime. The automatic address allocation simplifies set-up and devicereplacement. Specialist IT knowledge is not required.
Identification systems
79
(04.2016)
For further technical details please visit: www.ifm.com
Description Order no.
ANT512RFID antenna 125 KHz
ANT513RFID antenna 13.56 MHz,ISO 15693
E80370ID tag/30X2.8/03 – 13.56 MHz, 16 Kbits – FRAM
E80371ID tag/30X2.5/06 – 13.56 MHz, 896 bits
E80377ID tag/R20X2.5/06 – 13.56 MHz, 896 bits
RFID evaluation unit
RFID antennas
The products
ANT515RFID antenna 13.56 MHz,1 m cable, M12 plug
ANT516RFID antenna 13.56 MHz,2 m cable, M12 plug
ANT410RFID antenna 13.56 MHz,M12 design, flush
ANT411RFID antenna 13.56 MHz,M12 design, non-flush
ANT430RFID antenna 13.56 MHz,M30 design, flush
ANT431RFID antenna 13.56 MHz,M30 design, non-flush
ANT420RFID antenna 13.56 MHz,M18 design, flush
ANT421RFID antenna 13.56 MHz,M18 design, non-flush
E80380ID tag/30X2.8/03 – 13.56 MHz, 64 Kbits
E80381ID tag/4.35X3.6/03 – 13.56 Mhz, 896 bits, 10 pcs
E80382ID tag/label 65X30/03 – 13.56 Mhz, 896 bits, 500 pcs
E80379ID tag/label 80X50/03 – 13.56 Mhz, 896 bits, 500 pcs
RFID transponders for:ANT410, ANT411, ANT420, ANT421,ANT430, ANT431, ANT513, ANT515, ANT516
Antenna adapters
E80390Adapter to increase the ranges for RFID antenna type M18
E80391Adapter to increase the ranges for RFID antenna type KQ
Advantages of ifm’s RFID solutions:
Easy integrationData access to the transponders is fast and simple, viathe provided function blocks as well as directly via theprocess image of the controller.
Integrated web serverAll evaluation units have an integrated web server.Users can log in via an HTTP address to fully access thedevice.
Antennas, digital I /O and sensorsEach evaluation unit offers four sockets to connect upto four RFID antennas. Unused RFID antenna inputs canalso be configured for use as digital inputs or outputs.Two digital sensors can be connected to each socket setas an input; and an actuator to each output.
Versions with different interfaces
New: DTE103 with EtherCATThis version offers a high performance and free network topology.
DTE104 with TCP/IP and SAP/ERP connectivityThis new RFID evaluation unit is ideal for direct connection to PCs, industrial PCs or PLCs that have nostandardised fieldbus interface. Users can access allconnected antennas, sensors and actuators via TCP/IPprotocol.The integrated LINERECORDER AGENT simplifies the integration into SAP/ERP systems. This system solutionfacilitates the extension of the production process byadditional functions.
DTE100 with Profibus DPRFID evaluation unit with integrated Profibus DP interface.
DTE101 with ProfinetThis evaluation unit is in particular intended for customers with a Siemens controller.
DTE102 with EtherNet/ IPThis version is optimised for controllers from SchneiderElectric or Rockwell Automation.
RFID evaluation unit, EtherNet/IP interfac
RFID evaluation unit, Ethernet TCP/IP interface
RFID evaluation unit, Profinet interface
RFID evaluation unit, Profibus DP interface
DTE102
DTE104
DTE101
DTE103RFID evaluation unit, EtherCAT interface
DTE100
80
RFID 13,56 MHz
RFID with CANopenor J1939 interfacefor mobile machines
Optimised for outdoor use withIP 67 and IP 69K
Extended temperature range of -40...85 °C
E1 type approval
Shock and vibration resistant to EN60068
Versions with CANopen orJ1939 interface
RFID compact units suitable for mobile useThe robust RFID compact units with CANopen or J1939 interface have been developed for identification tasks in agricultural machines, municipalvehicles and construction machines. This guarantees a quick and safechange of the attachments. The machine operator knows which units areconnected at any time. He also receives exact information on operating times and maintenance intervals. This allows new service scenarios.
Simple solution from ifmRFID antenna, evaluation and interface are integrated in one compact androbust M18 or M30 housing. In contrast to conventional solutions with separate antennas and evaluationsystems the wiring complexity and required space are reduced.
Identification systems
81
(04.2016)
For further technical details please visit: www.ifm.com
Description Orderno.
E80370ID tag/30X2.8/03 – 13.56 MHz, 16 Kbits – FRAM
E80371ID tag/30X2.5/06 – 13.56 MHz, 896 bits
E80377ID tag/R20X2.5/06 – 13.56 MHz, 896 bits
The products
E80380ID tag/30X2.8/03 – 13.56 MHz, 64 Kbits
E80381ID tag/4.35X3.6/03 – 13.56 MHz, 896 bits, 10 pcs
E80382ID tag/label 65X30/03 – 13.56 MHz, 896 bits, 500 pcs
E80379ID tag/label 80X50/03 – 13.56 MHz, 896 bits, 500 pcs
Further technical data
Operating voltage [V DC] 9...32
Current consumption sensor [mA] < 50 at 24 V,< 85 at 12 V
Ambient temperature [°C] -40...85
Protection rating, protection class
IP 67 / IP 69K, III
Housing material stainless steel
Interfaces 1 x CAN
Supported CAN protocols CANopen, SAE J1939
Standards and tests(extract)
CE, radio approval
Connection M12 connector
Jumper, M12,5 m, black, PUR cable, LED EVC039
Jumper, M12,5 m, black, PUR cable EVC069
Socket, M12,2 m black, PUR cable EVM036
Socket, M12,10 m black, PUR cable EVM038
Socket, M12,5 m black, PUR cable EVC492
RFID transponders
Accessories
BasicDisplay XL, 4,3",CAN Interface CR0452
Display
Connection technology
Type Description Order no.
Type Description Order no.
Process and dialogue unit PDM360 NG,7" colour display CR1081
DTM424M18 flush, 13.56 MHz
DTM425M18 non-flush, 13.56 MHz
DTM434M30 flush, 13.56 MHz
DTM435M30 non-flush, 13.56 MHz
RFID evaluation unit / RFID antennaCANopen interface
DTM426
DTM427
DTM436
DTM437
RFID evaluation unit / RFID antennaSAE J1939 interface
M18 flush, 13.56 MHz
M18 non-flush, 13.56 MHz
M30 flush, 13.56 MHz
M30 non-flush, 13.56 MHz
ApplicationMobile machines are becoming ever more complex and complicated to use. Individual components assumemore and more tasks.With ifm's RFID system handling can be simplified and errors can be avoided: individual components orattachments are identified by means of an RFID tag andthe corresponding set-up is set automatically in thecontroller.Set-up times are minimised. Automatic identificationsimplifies the creation of user-specific system set-ups.Wrongly set process parameters are a thing of the past.
Higher productivityInformation on maintenance intervals and operatingtimes can automatically be generated and stored sincethe controller detects when and how long a specificmachine set-up runs. This increases productivity.
Perfectly suited for use in industrial applicationsThe RFID system is also suitable for industrial applications in which CANopen controllers are used. In this environment the DTM4xx RFID identification system is ideal thanks to its excellent price / performance ratio.
82
Systems for mobile machines
Real-time clock withCAN interface
Diagnostic and service units
Automotive relay housing keeps size down
CAN to communicate with the controller
Integrated alarm output
Predefined CODESYS functionblocks for easy integration
Robust design for mobile applications
Real-time measurement for mobile machinesThe exact system time is an important function for many mobile applications. While in large and complex machines this task is often fulfilled by the central display, up to now, there was no affordable solution for mobile applicationswhen it came to small and compact machines.In its compact automotive relay housing, the CANrtc real-time clock canoffer this functionality. Its parameters can be set via the CAN bus while itprovides the current time and date. Via an integrated alarm output, it ispossible to execute functions such as starting the machine controller. For the CANrtc, a software library of the CODESYS software is availablethat is compatible with IEC61131-3. This makes it particularly easy to quickly implement the application software.
83
(11.2016)
For further technical details please visit: www.ifm.com
Functions and advantagesThe compact real-time clock is an ideal add-on both for control systems in small and compact machines andcomplex process controllers of big machines.
• Mechanical designThe compact housing of the electronics is equippedwith an ISO 7588 blade arrangement providing allnecessary connections. These are easy to handle and available all over theworld. The CANrtc can also be used in areas that are exposed to splashing water due to an increasedprotection rating if installed in connection with theBasicRelay CR0421 and the corresponding modulecover.
• Powerful electronicsThe electronics are optimally adapted to the applica-tion. The integrated buffer battery reliably bridgesany supply voltage interruptions. At a freely adjustable point of time, the alarm output activates a connectedconsumer or the system electronics.
• Programmable to IEC 61131-3The CODESYS software enables a clear and easy creation of the application software for the user. Forthe CANrtc real-time clock, a library with the necessary functions for parameter setting and communication is available.The parameters can be set and read via the user program. The RTC data is also available to other busparticipants via the open CANinterface.
Description Orderno.
CAN real-time clock – CANrtc CR3020
Products
BasicRelay locations for 6 automotive relays ad 10 automotive fuses (6.3 mm), 2 supply rails and 6 power distributors, freely wirable
CR0421
Contact set for BasicRelay CR0421, wirable, utilising allconnections to a BasicController relay EC0457
Cover for BasicController CR04xx and BasicRelay CR042x, incl. cable seal EC0401
CAN programming interface CANfox EC2112
Adapter set CAN/RS232 for CANfox EC2113
CODESYS programming software, German CP9006
CODESYS programming software, English CP9008
Indication 1 x status LED (green)
ProgrammingCODESYS (IEC 61131-3)
or CAN Layer 2 commands
RTC formatDay / month / year /
hour / minute / second / day of the week
RTC accuracy ± 2 s /day (at 25°C)
RTC battery life ≤ 15 years (cannot be replaced)
Standards and testsFor further information,please refer to the datasheet: www.ifm.com
Technical data
CAN real-time clock – CANrtc
Housing Plastic
Device connection
6.3 mm flat-pin connectorwith a blade arrangement
to ISO 7588(can be used for example
with BasicRelay CR0421 orautomotive relay holder)
Protection rating,in connection with BasicRelay CR0421and cover EC0401
IP 20IP 54
Operating voltage [V DC] 8...32
Current consumption [mA] 6 (at 24 V DC)
Temperature rangeOperation [°C]Storage [°C]
-40...85-40...85
CAN interface
125 kbit/s / 250 kbit/s /500 kbit/s
(Default: 250 kBit/s), CAN Layer 2
Output
Switching voltage / switching current
Semiconductor output, Positive switching
(high side) Short-circuitand Overload protection
UB - max. 1.5 V DC / ≤ 2 A
84
Systems for mobile machines
CANwireless: wifi and Bluetoothfor the CAN bus
Diagnostic and service units
Wifi / Bluetooth connection formobile machines
Connection, programming,maintenance and diagnosis ofmachines – without any cables
Supports MaintenanceTool, CODESYS and Service-Tool
“Infrastructure” and “AccessPoint” operation modes
Compact and robust housing
Wireless connectivity for mobile machinesUsing the latest technologies, such as wifi supporting both 2.4 GHz and 5 GHz frequency bands and Bluetooth, multiple ways of connecting to themachine via radio are possible.CANwireless allows wireless connection to the machine directly from the existing ifm tools for mobile control systems such as CODESYS or the MaintenanceTool.In addition to the connection between PC or mobile end device and themobile machine, the machines can also be connected to each other.Using CANwireless, machines can exchange information and work together.The device thus supports the technologies of Industry 4.0 and IoT (Internetof Things) and makes the machines even more intelligent.
85
(11.2016)
For further technical details please visit: www.ifm.com
Functions and featuresCANwireless enables a wireless connection to the CAN bus in a vehicle or machine. With the two basicoperating modes “Infrastructure” and “Mini AccessPoint”, the module is able to create a connection in different ways.
• Operating mode “wifi Infrastructure”In the operating mode “Infrastructure”, a CANwirelessis configured to connect to an existing wifi infrastruc-ture. When connected to the network, the device canconnect automatically to another network participant(client) or listen to incoming connection requests (server). CAN bus data can be exchanged with other connectednetwork participants.
• Operating mode “wifi Mini Access Point”A CANwireless configured as mini wifi access pointwill create its own wifi network to which multipleother devices, e.g. other CANwireless devices, PCs,smartphones or tablets, can connect. As in the operating mode “Infrastructure”, the devicecan act as both client or server in its own network.Data on the CAN bus of the mini AP device will beshared with the other connected network participants.
• CAN to CAN bridgeThe operating modes “wifi Infrastructure”, “wifi MiniAccess Point” or “Bluetooth” also support a wirelessCAN bus bridge between several CANwireless devices.
• Wireless diagnoses and debuggingTools like CODESYS V2.3 and the maintenance toolallow the use of CANwireless as interface to the machine.
• CAN to wifi / Bluetooth filterIf required, CANwireless devices can filter data to betransferred by radio. This reduces the data load andincreases the operational reliability.
Description Orderno.
CAN to wifi / Bluetooth, CANwireless with integrated antenna CR3130
Products
CAN to wifi / Bluetooth, CANwireless for external antenna CR3131
CANwireless wifi /Bluetooth external antenna for CR3131 EC2118
M12 socket, shielded,2 m black, PUR cable, 5 poles EVC544
M12 socket,2 m black, PUR cable, 5 poles EVC070
wifi protocol IEEE 802.11 a/b/g/n, IEEE 802.11 d/e/i/h
wifi / Bluetooth - range 75 m (internal antenna),200 m (external antenna)
BluetoothClassic Bluetooth,
Version: 2.1 + EDR,Serial Port Profile (SPP)
Indication 1 x status LED (2 colours)
Standards and testsFor further information,please refer to the datasheet: www.ifm.com
Technical data
CANwireless
Housing Plastic
Connection M12 CAN/powerM12 service port
Protection rating Internal antennaExternal antenna
IP 67IP 65
Operating voltage [V DC] 8...32
Current consumption [mA]sleep mode
60 mA (24 V DC)< 1 mA (24V DC)
Temperature range [°C]Operation -40...75
CAN interface
CAN 2.0 A/B, ISO 11898-2CANopen,
Layer 2, J1939
wifi frequency 2.4 GHz / 5 GHz
86
Connection technology
Always a reliableconnection. ecolinkM12 – even for special applicationsSockets
Connection technology meetsthe M12 standard (EN 61076)
Optimum sealing even when fastened by hand
The mechanical end stop protects the O-ring against destruction
Permanent vibration protectionwith saw tooth contour
LEDs clearly visible even inbright lighting conditions
ecolink M12 for demanding applicationsMost applications require special solutions. Only reliable production pro-cesses and faultless assembly lead to success in the long run.The integrated end stop protects the O-ring against destruction caused by over-tightening the nut. No tools needed for installation and removal.The asymmetrically acting vibration protection holds the nut tight in its position, guaranteeing an optimum and permanent seal.High-quality materials and intense monitoring during and after the pro-duction guarantee the highest quality standard.
87
(11.2016)
For further technical details please visit: www.ifm.com
Technical data:Operating voltage: 10...36 V DCCurrent rating: 4 A (cURus 3 A)Protection rating: IP 67, IP 68, IP 69Kin locked condition with the matching counterpart.Tightening torque: 0.6...1.5 NmVibration / shock: 750 g, 1 million cyclesCable: 4 x 0.34 mm2
Drag chain > 5 million cycles(EVT: > 1 million cycles)
Approvals:cRUus
Applications:EVC – factory automation, machine tool industryEVT – hygienic and wet areasEVM – mobile applicationsEVW – welding applications
Products
Dimensions
Type Description Order no.
Factory automation and the machine tool industry
2.0 m, PUR cable, black EVC644
5.0 m, PUR cable, black EVC645
10.0 m, PUR cable, black EVC646
Mobile applications
2.0 m, PUR cable, black EVM068
5.0 m, PUR cable, black EVM069
10.0 m, PUR cable, black EVM070
Welding applications
2.0 m, PUR cable, grey EVW167
5.0 m, PUR cable, grey EVW168
10.0 m, PUR cable, grey EVW169
Hygienic and wet areas
2.0 m, PVC cable, orange EVT461
5.0 m, PVC cable, orange EVT462
10.0 m, PVC cable, orange EVT463
25.0 m, PVC cable, orange EVT464
Wiring diagram
EVC, EVM, EVW, EVT
out
out
L+
L
1
3
4
YE GN
BN
BU
BK
2 WH
YE
YE GNYE
3 x LED
3 x LED
15,5
M12x1 45
14
EVC, EVW
3 x LED
3 x LED
45
14
15,5
M12x1
EVM
3 x LED
3 x LED
45
14
15,5
M12x1
EVT
88
Connection technology
ecolink M12 cables reduce voltage drop
Sockets
Cables with 4 x1 mm2 reducevoltage drop
Connection technology meetsthe M12 standard (EN 61076)
Optimum sealing even whenmounted without tools
The mechanical end stop protects the O-ring against destruction
Permanent vibration protectionwith saw tooth contour
ecolink performance cable for demanding applicationsThe increased wire cross-section of 1mm2 even conducts higher voltageswith lower voltage drop.The integrated end stop protects the O-ring against destruction caused byover-tightening the nut. No tools needed for installation and removal.The asymmetrically acting vibration protection holds the nut tight in its position, guaranteeing an optimum and permanent seal.High-quality materials and intense monitoring during and after the production guarantee the highest quality standard.
89
(11.2016)
For further technical details please visit: www.ifm.com
Technical data:Operating voltage: 250 V AC / 300 V DCCurrent rating: 4 A (cURus 3 A)Protection rating: IP 67, IP 68, IP 69K in locked condition with the matching counterpart.Tightening torque nut: 0.6...1.5 Nm Note the maximum value of the counterpart.Vibration / shock: 750 g, 1 million cycles
Materials:Housing / moulded body: PURCoupling nut: nickel-plated brassContacts: gold-platedSealing ring: VitonCable: 4 x 1 mm2, drag chain > 1 million cycles
Approvals:cURus in progress
Applications:Factory automation, machine tool industry
Products
M12 sockets
Dimensions
49,5
14
15,5
M12x1
45
14
L
15,5
M12x1
Example EVC716
Type Description Order no.
2.0 m EVC706
5.0 m EVC707
10.0 m EVC708
20.0 m EVC709
50.0 m EVC710
2.0 m EVC711
5.0 m EVC712
10.0 m EVC713
20.0 m EVC714
50.0 m EVC715
0.25 m EVC716
0.5 m EVC717
1.0 m EVC718
2.0 m EVC719
5.0 m EVC720
10.0 m EVC721
20.0 m EVC722
0.25 m EVC723
0.5 m EVC724
1.0 m EVC725
2.0m EVC726
5.0 m EVC727
10.0 m EVC728
20.0 m EVC729
0.25 m EVC730
0.5 m EVC731
1.0 m EVC732
2.0 m EVC733
5.0 m EVC734
10.0 m EVC735
20.0 m EVC736
0.25 m EVC737
0.5 m EVC738
1.0 m EVC739
2.0 m EVC740
5.0 m EVC741
10.0 m EVC742
20.0 m EVC743
1
2
3
4
BN
WH
BU
BK
Wiring diagram
1
2
3
1
2
3
4 4
Example EVC706 Example EVC716
Jumper M12 / M12
90
Connection technology
ecolink M12 – the secure connectioneven in difficult applicationsSockets
Halogen-free and silicone-free
Contoured nut with enhancedgrip makes for optimum sealingeven when hand tightened
The mechanical end stop protects the O-ring against destruction
Permanent vibration protectionwith saw tooth contour
LEDs clearly visible even underbright lighting
ecolink M12 for hygienic and wet areas in the food industryMost applications require special solutions. Only high-quality materials, safe production processes and faultless mounting lead to success in thelong run.The integrated end stop protects the O-ring against destruction caused by tightening the nut too much. Mounting and removal are carried out without tools.The asymmetrically acting vibration protection holds the nut tight in its position, guaranteeing an optimum and permanent seal.High-quality materials especially adapted to the application and intensivemonitoring during and after production guarantee maximum quality standards.
91
(11.2016)
For further technical details please visit: www.ifm.com
Technical data:Operating voltage:4-pole: 250 V AC / 300 V DC5-pole: 60 V AC / DCwith LED: 10...36 V DCNominal current: 4 AProtection: IP 67, IP 68, IP 69KIn locked condition with the matching counterpart.Tightening torque nut: 0.6...1.5 NmNote the maximum value of the counterpart.Ambient temperature: -25...100 °CVibration / shock: 750 g, 1 million cycles
Materials:Housing / moulded body: PPContact carrier: PA 6.6Coupling nut: high-grade stainless steel (316L / (1.4404)Contacts: gold-platedSealing ring: EPDMCable: MPPE halogen-free, silicone-free, 4-pole: 4 x 0.34 mm2, Ø 4.9 mm5-pole: 5 x 0.34 mm2, Ø 5.1 mm
Approvals:cCSAus in preparation
Applications:Hygienic and wet areas in the food industry
The products
Type Description Orderno.
Orderno.
M12 sockets 4-pole 5-pole
5.0 m EVF010
10.0 m EVF011
25.0 m EVF012
5.0 m EVF013
10.0 m EVF014
25.0 m EVF015
5.0 m, LED –
10.0 m, LED –
25.0 m, LED –
EVF001
EVF002
EVF003
EVF004
EVF005
EVF006
EVF007
EVF008
EVF009
Dimensions
Example EVF001
Example EVF004
Example EVF007
15,5
45
14
M12 x1
15,5
M12x1 36,5
26,5
14
15,5
M12x1 36,5
26,5
14LED
92
Connection technology
Compact low-profileM8 splitters with secure ecolink connectionSplitter boxes
O-ring protection by a mechanical end stop
Perfect ingress resistance evenwhen mounted without tools
High-quality materials for permanent reliability
Connection technology meetsthe M8 standard (EN 61076)
Little space required due tolean and flat design
Small design – maximum protectionIn particular where space is at a premium, e.g. in robotics, handling and assembly technology, most applications require special solutions. Here the new, lean and flat M8 splitter with the tried-and-tested safe ecolink technology is a convincing solution. Only high-quality materials, safe production processes and fault-free installation ensure high machine uptime in the long run.
ecolink technologyThe new ecolink technology prevents incorrect mounting. An integratedmechanical end stop protects the O-ring from destruction. So, rapid andsecure installation is possible without an expensive torque wrench.
93
(11.2016)
For further technical data please go to: www.ifm.com
Technical data:Operating voltage: with LED 10...30 V DCNominal current:total max. current rating 6 Amax. 2 A per locationwith M12 connectiontotal max. current rating 2 Amax. 2 A per locationProtection: cable connection IP 65, IP 67, IP 68 connector IP 65, IP 67 in locked condition with the matching counterpart.Tightening torque M8 connector: 0.3...0.6 Nm,adhere to the maximum value of the counterpartAmbient temperature: -25...80 °C
Materials:Housing: PURContact carrier: PAFitting: CuZn/NiContacts: gold-platedSealing ring: VitonCable: PUR, halogen-free
Applications:Factory automation, machine tools, hydraulics
Products
M8x1
17
20
4,5
4,5
3016
129,
5 101
4,3
1122
Dimensions
Example EBC054
M12x1
17
23,7
4,5
4,5
3016
85,4
574,
3
M8x1
1122
Example EBC050
Splitter with cable connection · LED · PNP
EBC048
EBC051EBC049
EBC052
44
2 and 42 and 4
510510
EBC054
EBC056EBC055
EBC057
44
2 and 42 and 4
510510
EBC136EBC137
44
510
M12, 8-pole
M12, 12-pole
EBC0504
M16, 8-pole EBC0532 and 4
M12, 12-pole EBC1384
Type Signals on pin
Order no.Connection/Cable[m]
Splitter with connector · LED · PNP
EBC1394Connection technology
Type Description Orderno.
Socket, M12, 8-pole10 m black, PUR cable
Socket, M12, 8-pole5 m black, PUR cable
Socket, M12, 8-pole10 m black, PUR cable
Socket, M16, 8-pole5 m black, PUR cable
Socket, M16, 8-pole10 m black, PUR cable
E11311
E11232
E12260
E11226
E11227
Socket, M12, 12-pole,5 m black, PUR cable E12502
Socket, M12, 12-pole,10 m black, PUR cable E12503
Socket, M12, 12-pole,15 m black, PUR cable E12504
Socket, M12, 12-pole,5 m black, PUR cable E12457
Socket, M12, 12-pole,10 m black, PUR cable E12505
Socket, M12, 12-pole,15 m black, PUR cable E12506
94
Connection technology
ecolink M12 –T splitters for difficult applicationsT splitters
Halogen and silicone-free
Connection technology meetsthe M12 standard (EN 61076)
Optimum sealing even whenmounted without tools
The mechanical end stop protects the O-ring against destruction
Visible and tactile marking of the ports
ecolink M12 for hygienic and wet areas in the food industryMost applications require special solutions. Only high-quality materials, safe production processes and faultless mounting lead to success in thelong run.The integrated end stop protects the O-ring against destruction caused by tightening the nut too much. Mounting and removal are carried out without tools.High-quality materials especially adapted to the application and intensivemonitoring during and after production guarantee maximum quality standards.
95
(11.2016)
For further technical data please go to: www.ifm.com
Technical dataOperating voltage:4-pole: 250 V AC / 300 V DC5-pole: 60 V AC / DCNominal current: 4 AProtection rating: IP 67, IP 68, IP 69Kin locked condition with the matching counterpart.Tightening torque: 0.6...1.5 NmAmbient temperature: -25...100 °C
Materials:Housing / moulded body: PACoupling nut (non-rotatable):high-grade stainless steel (316L / 1.4404)Contacts: gold-platedSealing ring: EPDM
Approvals:cRUus in preparation
Applications:For hygienic and wet areas in the food industry
Products
Type Wiring diagramno.
Order no.LED
1 x M12 male, 2 x M12 female
1 –
2
3
4
–
–
–
5
6
–
–
Dimensions
M12x1
48,716
389
21
M12x1
CB
A
M12x1
14
Wiring diagram
4
1 1
3
4
3
2
B
A
1
3
4
C
1 1
33
55
B
A2
4
2
1
3
5
4
2
4
C
1 1
3
5
3
5
44
B
A
1
3
5
4
2
C
1 1
2
3
2
3
4
B
A
1
2
3
4
5
5
4
5
C
1
2
3
4
1 1
3
5
3
5
22
B
A
1
3
5
2
4
C
5
1 1
3
5
4
3
4
B
A
1
3
4
5
C
5
6
EBF006
EBF007
EBF008
EBF009
EBF010
EBF011
96
Power supplies
Powerful switched-mode power supplywith an enormouspower reserve24 V DC switched-mode power supplies
50 % power reserve for up to 4 seconds
AC wide-range input
Compact, slim design
High degree of efficiency of around 95 %
LEDs for OVL and DC OK output
PowerfulWith 50 % power reserve for up to 4 seconds these power supplies providesufficient power to cope with short current spikes even when operated attheir limit.
EfficientThese power supplies are designed for great efficiency and reach a higher-than-average figure of around 95 %. This saves energy costs and reduces waste heat in the control cabinet.
Space-savingInnovative technology means the new ifm power supplies require considerably less space in the panel, as compared to common cabinetpower supplies.
97
(04.2016)
24 V DC switched-mode power supplies for rail mounting
Output current permanent / peak
at 24 V DC
Output voltage
[V]
Input voltage
[V AC]
OutputDC OK signal
Efficiency(120 / 230 V AC)
[%]
Orderno.
40 A / 60 A 24...28 DC; adjustable 100...240 Relay93.6 / 94.6 E84016
40 A / 60 A 24...28 DC; adjustable 3 x 380...480 Relay95.3 / 95.2 E84036
Further technical data
Functions and advantages
Power reserveThese power supplies provide an excellent power reserve of 50 percent for up to four seconds to copewith short current loads.
Inrush current limitationInstead of an inrush current limitation with a simpleNTC element, charging the capacitors of the new ifm switched-mode power supplies is microprocessor-controlled. This allows the selectivity of fuses protectingthe inputs on the primary side and saves wiring costs.
Long bridging timesThe voltage supply is ensured for several milliseconds ifthe mains voltage briefly fails, e.g. caused by switchingoperations in the supply network.
Wide operating temperature rangeifm switched-mode power supplies provide the specificnominal power across the entire temperature range.Derating only has to be taken into account above anoperating temperature of 60 °C.
Double terminalAll 24 V switched-mode power supplies are equippedwith double terminals. This simplifies wiring and provides more clarity in the control cabinet.
Dimensions
119,3
354
132,6127,6
123
2
34
5
6
1
N L PE
125
13
14
15
16
124
130,
5
E84016
119
354
130,7127,1
2
34
5
6
1
L1 L2 L3 PE
110
13
14
15
16
124
130,
5
E84036
1) Jumper ”individual / parallel operation“2) Potentiometer 24...28 V DC3) LED DC OK4) LED overload5) Terminals DC OK signal6) Terminal shut-down input
For further technical details please visit: www.ifm.com
Output power / [W]peak
960 /1440
Ambient temperature [°C] -25...70
Display LED 1 x DC OK1 x overload
Shut-downControlled
switch-off of the output voltage
Frequency range [Hz] 47...64
Protection IP 20
Short-circuit proof •
Overload protection •
98
Power supplies
Circuit protectionwith monitoringfunction for the 24 Vsecondary circuitAccessories
Modular and selective protec-tion in plant and machinery
Reliable circuit protection allows reduction of wire cross-sections
Fast replacement using innova-tive connection technology
Detection of triggering cause (via IO-Link)
Current and voltage measurement in each channel(via IO-Link)
Safety on the 24 V sideAs opposed to the 230 V primary side, the circuit protection in the secondary circuit is often neglected. Another issue is that in the event of afailure of the 24 V DC voltage supply standard mechanical circuit breakersoften do not trigger. This may happen with long cables, for example.The electronic circuit breakers from ifm monitor the circuit ideally and, if required, disconnect reliably. Individual branch circuits can be selectivelydisconnected. This allows a reduction of wire cross-sections in the load circuit of the switched-mode power supplies. The system has a modularstructure and can be ideally adapted to the circuits of plant and machinery.The IO-Link version also allows evaluation of important diagnostic data.
99
(04.2016)
For further technical details please visit: www.ifm.com
Modular installationThe system has a modular structure and consists of asupply module to feed max. 40 A. The protection modules can be mounted side by side. This is done viaa simple clip mechanism, completely without anybridges, jumpers or the like.Easy mounting and minimised wiring complexity savecost and time. With the standard version the user canconnect up to 10 and with the IO-Link version up to 8 safety modules to the head module.
VersionsThere is a standard and an IO-Link version. In additionto the triggering mechanism, the modules feature anLED for signalling if the module has triggered, if it is active and to what extent it is utilised. By means of a pushbutton each channel can be activated, deactivated or set. The feed module has an additional collective output toprovide a warning signal if a module has triggered.
More transparency with IO-LinkThe IO-Link version has the same function; there is, however, additional information about each channel:Transfer to the IO-Link master:• effective nominal current (1 byte cyclical)• output voltage (acyclical) • triggering counter (acyclical)• current unit status (1 byte cyclical): – short circuit – overload – undervoltage – limit reached (80 % IN)Transfer from the IO-Link master: • activation/deactivation • reset with triggering • reset triggering counter
The modules are available in the fixed sizes 2 A, 4 A, 6 A, 8 A and 10 A. The fixed current values preventsubsequent misuse by changing the max. current value.
InterfaceInputs
[V DC]
Orderno.
Supply module, standard
–24, 40 A DF1100
Nominal current
[A]
–
Protection module, standard
–– DF12122 x 2
–– DF12142 x 4
–– DF12162 x 6
Operating voltage [V DC] 24 (18...30)
Switch-off characteristics Time-current characteristics
Temperature range [°C] -25...60
Connection technology Push-in incl. pusher
Installation DIN rail
Approvals UL508 listed (in preparation)
Fail-safe element = nominal current (e.g. 4 A = 4 A)
Switch-on capacity 20,000 μF
Switching status indication LEDMulti-colour,
signal contact via feeding module
Further technical data
Supply module, IO-Link
IO-Link24, 40 A DF2100–
Protection module, IO-Link
IO-Link in combinationwith head module– DF22122 x 2
IO-Link in combinationwith head module– DF22142 x 4
IO-Link in combinationwith head module– DF22162 x 6
Accessories
Type Description Orderno.
USB IO-Link master for parameter settingand analysis of unitsSupported communication protocols IO-Link (4.8, 38.4 and 230 kBits/s)
E30390
LINERECORDER SENSOR,software for parameter setting and setting up IO-Link sensors
QA0001
–– DF12081 x 8
–– DF12101 x 10
IO-Link in combinationwith head module– DF22081 x 8
IO-Link in combinationwith head module– DF22101 x 10
100
www.ifm.comInformation around the clock andaround the globe in 23 languages on the internet.
• Information
- product innovations- company news- exhibition info- locations- jobs
• Documentation
- data sheets- operating instructions- manuals- approvals- CAD data
• Communication*
- request for documents- recall service- live advice- newsletter
• Selection
- interactive product selection aids- configuration tools- data sheet direct
• Animation
- virtual product animations- flash movies (video sequences)
• Application
- applications- product recommendations- calculation aids
• Transaction*
- e-shop processing- e-procurement catalogues
*Some offered information is available country-specific
101
Convenient order processingvia the e-shop** on the internet.
Secured authentication
Customer-related priceindication
Real time availability check
Personal product favourites
Online parcel tracking
Individual order history
Convenient quick input form
Simple order processing
Management of shippingaddresses
Confirmations by e-mail
ifm application database
ifm’s automation technology is used tofor applications in many different typesof plant in almost all industries. Learnhow ifm can improve your production.
Application examples can be found onour website at:www.ifm.com/gb/applications
** Already available in many countries.
102
ifm a
rtic
le n
o. 7
8002
147
· We
rese
rve
the
right
to
mak
e te
chni
cal a
ltera
tions
with
out
prio
r no
tice.
· Pr
inte
d in
Ger
man
y on
non
-chl
orin
e bl
each
ed p
aper
. 10
/16
ifm electronic gmbhFriedrichstraße 145128 EssenTel. +49 / 201 / 24 22-0Fax +49 / 201 / 24 22-1200E-mail [email protected]
103