NEWS OF THE NEW VERSION

Low voltage system and boards software for design and estimation

Ver: 7.0

January 2010 - News Software GWPBT-Q 7.0

1/7

INDEX >> ADDED NEW MOULDED CASE DEVICES MTX .………………..……………………… 2 The GWPBT-Q program is been updated with the new moulded case devices MTX as included in the GEWISS catalogue 2010 >> ADDED NEW METAL DISTRIBUTION BOARDS CVX630M ..…………..…………..… 2 The GWPBT-Q program is been updated with the new metal distribution boards CVX630M as included in the GEWISS catalogue 2010 >> ADDED NEW MODULAR ACCESSORIES………………………………………..……… 3 The GWPBT-Q program is been updated with the new modular accessories as included in the GEWISS catalogue 2010 >> SETTINGS BUTTON …..…………………………………………………………………….. 3 To simplify the use of the program the settings button is located in the left menu as first button >> NEW TERMINAL BOARD CONNECTIONS MANAGEMENT....................................... 4 By set the flags “Terminal board connections” and “Terminal blocks numeration” located in the window “Board settings” is possible to activate the terminal board connections >> CABLE LENGTH CALCULATION ……………...…………………………………………. 5 The program estimates the length of the cable used in the project divided by section and by type as unipolar or multipolar >> DEVICES MODIFICATION SIMPLIFIED ………………………………………………….. 5 To replace a device there is the button: “set the article for the selected symbol ” >> NUMERATION MODIFIED ..…..……………………………………………………………. 6 The devices inserted in the front view show the number vertically oriented instead horizontally oriented so there aren’t overlappings >> DEVICES ARRANGEMENT IN THE AUTOMATIC COMPOSITION..…………..…....... 6 As default setting the automatic composition orders the devices with an optimization manner, now is possible to order the devices with the scheme order >> MAIN POWER METER VISUALIZATION ………………..……...................................... 7 The main power meter by default is inserted above the main device, now is possible to delete its >> ELECTRICAL SCHEME FRAME ……........................................................................... 7 By set the flag “Print cartouche with coordinates” in the window “General settings” section “Options” is possible to show the coordinates around the electrical scheme

January 2010 - News Software GWPBT-Q 7.0

2/7

NEW FUNCTIONS >> ADDED NEW MOULDED CASE DEVICES MTX << The GWPBT-Q program is been updated with the new moulded case devices MTX as included in the GEWISS catalogue 2010.

>> ADDED NEW METAL DISTRIBUTION BOARDS CVX630M << The GWPBT-Q program is been updated with the new single-block metal distribution boards CVX630M as included in the GEWISS catalogue 2010

January 2010 - News Software GWPBT-Q 7.0

3/7

>> ADDED NEW MODULAR ACCESSORIES << The GWPBT-Q program is been updated with the new modular accessories as included in the GEWISS catalogue 2010.

>> SETTINGS BUTTON << To simplify the use of the program the settings button is located in the left menu as first button in all the program sections (electrical scheme, front view, …)

January 2010 - News Software GWPBT-Q 7.0

4/7

>> NEW TERMINAL BOARD CONNECTIONS MANAGEMENT << By set the flags “Terminal board connections” and “Terminal blocks numeration” located in the window “Board settings” is possible to activate the terminal board connections that will be showed in the electrical scheme and in the prints.

January 2010 - News Software GWPBT-Q 7.0

5/7

>> CABLE LENGTH CALCULATION << The program estimates the length of the cable used in the project divided by section and by type as unipolar or multipolar. This data is showed in the price list.

>> DEVICES MODIFICATION SIMPLIFIED <<

To replace a device there is the button: “set the article for the selected symbol”, in this way in the search article window the device symbol is automatically defined.

January 2010 - News Software GWPBT-Q 7.0

6/7

>> NUMERATION MODIFIED << The devices inserted in the front view show the number vertically oriented instead horizontally oriented so there aren’t overlappings.

>> DEVICES ARRANGEMENT IN THE AUTOMATIC COMPOSITION << As default setting the automatic composition orders the devices with an optimization manner, now is possible to order the devices with the scheme order.

January 2010 - News Software GWPBT-Q 7.0

7/7

>> MAIN POWER METER VISUALIZATION << The main power meter by default is inserted above the main device, now is possible to delete its.

>> ELECTRICAL SCHEME FRAME << By set the flag “Print cartouche with coordinates” in the window “General settings” section “Options” is possible to show the coordinates around the electrical scheme.