newbrick: the next evolution in brick
TRANSCRIPT
The Timeless Look of Brick, with Improved Performance, Streamlined Installation, and Reduced Installed Wall Cost
NEWBRICK: THE NEXT EVOLUTION IN BRICK
Tru by Hilton Hotel Manchester, NH
A lightweight insulated brick that matches thesize, appearance and texture of clay, NewBrick® from Dryvit® is a higher-performing alternative to traditional clay brick veneers.
More durable than traditional brick, NewBrick offers a superior cladding solution that reduces overall wall cost and accelerates the dry-in process.
NewBrick’s light weight, strength, customizability, and ease of use make it a particularly appealing way to integrate the beauty and durability of brick into your next project.
Leading national brands like InterContinental Hotels Group, Hilton Hospitality Company, and Marriott International have already discovered the benefits of Dryvit’s NewBrick.
NewBrick’s flexibility and energy efficiency are perfect for a wide range of applications from retail to hospitality. 1. Fairfield by Marriott, Dayton, OH
2. Arby’s, Jamestown, NY 3. Dunkin’, Avon, OH4. Applebee’s, Philadelphia, PA5. Big Y, Shelton, CT
1
2 3
4 5
Information contained in this brochure conforms to the standard detail recommendations and specifications for the installation of Dryvit Systems, Inc. products as of the date of publication of this document and is presented in good faith. Dryvit Systems, Inc. assumes no liability, expressed or implied, as to the architecture, engineering or workmanship of any product. To ensure that you are using the latest, most complete information, contact Dryvit Systems, Inc.
1
31. Lipscomb University, Nashville, TN 2. 2nd Street, San Francisco, CA 3. Spaces, San Mateo, CA 4. (Close-up of NewBrick wall)5. Owens Community College, Perrysburg, OH6. 242 Broadway, Schenectady, NY
A SUPERIOR WALL, FROM FOUNDATION TO FINISH
Air. Water. Vapor. Thermal. As part of the total wall system, NewBrick can include all 4 barriers when used over a Dryvit® Outsulation® system under a complete single-source warranty.
Look past the per-thousand rate — NewBrick’s advantages in labor and freight costs, job duration, tool/equipment requirements and critical path can mean over 25% savings in the true total installed cost.
2 3
5 6
1
4
THE
DIFFERENCE
A WHOLE WALL SYSTEMAir. Water. Vapor. Thermal. As part of the whole wall system, NewBrick can include all 4 barriers when used with a Dryvit Outsulation system with a single-source install and whole wall warranty.
FASTER SHELL DRY-IN A quicker whole wall installation means earlier shell dry-in for your building, so interior work can begin up to ten weeks ahead of schedule.
IMPACT RESISTANT NewBrick stands up to every-day impacts -- passing a Gardner Impact test at 48 in/lb with barely a mark while traditional brick broke in half.
ELIMINATES SUPPORTS By eliminating the cost — and labor — for anchors, bearing shelf angles, brick ties, mortar nets and AWRB penetrations, NewBrick’s whole wall savings1 average $15-$17 / ft2.
LIGHTWEIGHT At a fraction the weight, NewBrick cuts freight costs significantly — and is easier to handle on site, eliminating the daily need for a telehandler and additional labor to move brick on the scaffold.
SAFER JOBSITES NewBrick reduces exertion and the potential for injury to laborers, and also helps minimize jobsite mishaps and material waste.
1 On a typical 2-story building
see more at
NEWBRICK.COM
TR
AD
ITIO
NA
L
BR
ICK
Total installed wall cost
Contractors for framing, sheathing, barrier, facade
Warranties & points of contact
Shell dry-in up to 10 weeks faster
Durable: Passes Gardner Impact 48 in/lb test
Support Required: Anchors, ties, shelf angles, & more
Lightweight: Weight per single modular brick
Freight: Truckloads required to haul 30,000 ft2
Jobsite productivity & safety improved
Material handling can switch to scissor lift
Energy savings through improved efficiency
$1.3M
1
1
yes
yes
no
.36 lbs
1.63
yes
yes
yes
$1.8M
multiple
multiple
no
no
yes
4.2 lbs
20.07
no
no
no
PPPPPPPPPPP
*Calculations based on a 30,000-square-foot educational facility in Ohio with union contractors and includes cost of Bricks/NewBricks; labor; access, permits and bond fees; mobile scissor lifts/scaffolds.
Advantage: NewBrick. Worrying about the per-thousand rate is missing the forest for the trees (or the building for the bricks.) The true installed wall cost reveals significant financial benefits of using the NewBrick system.
Take a look at NewBrick’s advantages compared to traditional brick, as specified for a real 30,000 ft2 educational facility construction project*:
VERSATILE DESIGN CAPABILITY FOR ANY PROJECT NewBrick is available in 16 standard colors so you can create looks that run from traditional to modern. Custom colors and blends are available to tailor your project’s specifications.
CANNON DAWN | 985BST COUNTRY COTTAGE | 915BSTCITADEL | 940BSTCASTLE WALL | 930BST
EARTHEN VESSEL | 935BST HERITAGE HOUSE | 965BSTHARBOR SIDE | 920BSTGATEHOUSE | 910BST
HOMELAND | 950BST RIVERBANK | 900BSTPROVINCIAL PARK | 960BSTPATRIOT RED | 970BST
RUSTIC VILLA | 945BST VALLEY FIELD | 975BSTTOWN SQUARE | 980BSTSCHOOL YARD | 925BST
Colors shown are in Wire Cut texture, and should be considered approximate of actual NewBrick colors. Some natural variations will be apparent with the product relating to selected color, texture and lighting. A field installed mock-up should be required for every project to confirm design intent of color and texture.
COLORS
TEXTURES
IRON SPOT FLASHED WITH IRON SPOTFLASHED
EFFECTS
CORINTH (60% HERITAGE HOUSE FLASHED, 30% HERITAGE HOUSE,10% RIVERBANK)
ROCKLAND(60% PROVINCIAL PARK, 30% COUNTRY COTTAGE, 10% RIVERBANK)
LITTLETON(50% PROVINCIAL PARK, 50% COUNTRY COTTAGE)
GEORGETOWN(60% HERITAGE HOUSE, 30% VALLEY FIELD, 10% RIVERBANK)
BLENDS
SMOOTH WIRE CUTVELOUR COARSE CUT
SIZES
ECONOMY
ECONOMYFLAT BRICK
7 5/8"
3 5/8"
1 1/8"
ECONOMYEND BRICK
ECONOMYCORNER BRICK ECONOMY
EDGE CAPBRICK
ECONOMY135° CORNER
BRICK
ECONOMYEDGE CAP END
BRICK
ECONOMY1.5 FLAT BRICK
The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.
NB 0.0.A3
NewBrick Economy Dimensions
NOTE:1. NEWBRICK HAS A MINIMUM THICKNESS OF
1 1/8 in (29mm). UNLESS OTHERWISE NOTED.
2. NEWBRICK HAS A 3/8 IN (9.5mm) HORIZONTAL ALIGNMENT GUIDE.
NewBrick®
1 5/8"
3 5/8"
2 1/4"
3 5/8"
3 5/8"3 5/8"
2 1/4"
3 5/8"
3 5/8"
3 5/8"
3 5/8"
3 5/8"
3 5/8"
7 5/8"
7 5/8"
1 1/8"
7 5/8"
7 5/8"
7 5/8"
7 5/8"
7 5/8"
ECONOMYRIGHT CORNER BRICK
ECONOMYFLAT BRICK
7 5/8"
3 5/8"
1 1/8"
ECONOMYEND BRICK
ECONOMYCORNER BRICK ECONOMY
EDGE CAPBRICK
ECONOMY135° CORNER
BRICK
ECONOMYEDGE CAP END
BRICK
ECONOMY1.5 FLAT BRICK
The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.
NB 0.0.A3
NewBrick Economy Dimensions
NOTE:1. NEWBRICK HAS A MINIMUM THICKNESS OF
1 1/8 in (29mm). UNLESS OTHERWISE NOTED.
2. NEWBRICK HAS A 3/8 IN (9.5mm) HORIZONTAL ALIGNMENT GUIDE.
NewBrick®
1 5/8"
3 5/8"
2 1/4"
3 5/8"
3 5/8"3 5/8"
2 1/4"
3 5/8"
3 5/8"
3 5/8"
3 5/8"
3 5/8"
3 5/8"
7 5/8"
7 5/8"
1 1/8"
7 5/8"
7 5/8"
7 5/8"
7 5/8"
7 5/8"
ECONOMYRIGHT CORNER BRICK
ECONOMYFLAT BRICK
7 5/8"
3 5/8"
1 1/8"
ECONOMYEND BRICK
ECONOMYCORNER BRICK ECONOMY
EDGE CAPBRICK
ECONOMY135° CORNER
BRICK
ECONOMYEDGE CAP END
BRICK
ECONOMY1.5 FLAT BRICK
The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.
NB 0.0.A3
NewBrick Economy Dimensions
NOTE:1. NEWBRICK HAS A MINIMUM THICKNESS OF
1 1/8 in (29mm). UNLESS OTHERWISE NOTED.
2. NEWBRICK HAS A 3/8 IN (9.5mm) HORIZONTAL ALIGNMENT GUIDE.
NewBrick®
1 5/8"
3 5/8"
2 1/4"
3 5/8"
3 5/8"3 5/8"
2 1/4"
3 5/8"
3 5/8"
3 5/8"
3 5/8"
3 5/8"
3 5/8"
7 5/8"
7 5/8"
1 1/8"
7 5/8"
7 5/8"
7 5/8"
7 5/8"
7 5/8"
ECONOMYRIGHT CORNER BRICK
ECONOMYFLAT BRICK
7 5/8"
3 5/8"
1 1/8"
ECONOMYEND BRICK
ECONOMYCORNER BRICK ECONOMY
EDGE CAPBRICK
ECONOMY135° CORNER
BRICK
ECONOMYEDGE CAP END
BRICK
ECONOMY1.5 FLAT BRICK
The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.
NB 0.0.A3
NewBrick Economy Dimensions
NOTE:1. NEWBRICK HAS A MINIMUM THICKNESS OF
1 1/8 in (29mm). UNLESS OTHERWISE NOTED.
2. NEWBRICK HAS A 3/8 IN (9.5mm) HORIZONTAL ALIGNMENT GUIDE.
NewBrick®
1 5/8"
3 5/8"
2 1/4"
3 5/8"
3 5/8"3 5/8"
2 1/4"
3 5/8"
3 5/8"
3 5/8"
3 5/8"
3 5/8"
3 5/8"
7 5/8"
7 5/8"
1 1/8"
7 5/8"
7 5/8"
7 5/8"
7 5/8"
7 5/8"
ECONOMYRIGHT CORNER BRICK
NORMANFLAT BRICK
11 5/8"
2 1/4"
1 1/8"
NORMANEND BRICK
NORMANCORNER BRICK
NORMANEDGE CAP
BRICK
NORMANLEFT 135° OUTSIDE
CORNER BRICK
NORMANEDGE CAP END
BRICKNORMAN
1.5 FLAT BRICK
The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.
NB 0.0.A1
NewBrick Norman Dimensions
NOTE:1. NEWBRICK HAS A MINIMUM THICKNESS OF
1 1/8 in (29mm). UNLESS OTHERWISE NOTED.
2. NEWBRICK HAS A 3/8 IN (9.5mm) HORIZONTAL ALIGNMENT GUIDE.
NewBrick®
11 5/8"
1 5/8"
2 1/4"
1 1/8"
3 5/8"
2 1/4"
2 1/4"2 1/4"
3 5/8"
3 5/8"
11 5/8"
11 5/8"
3 5/8"
2 1/4"
2 1/4"
3 5/8"NORMAN
LEFT 135° INSIDECORNER BRICK
11 5/8"
11 5/8"
2 1/4"
11 5/8"
11 5/8"
NORMANRIGHT CORNER BRICK
NORMANFLAT BRICK
11 5/8"
2 1/4"
1 1/8"
NORMANEND BRICK
NORMANCORNER BRICK
NORMANEDGE CAP
BRICK
NORMANLEFT 135° OUTSIDE
CORNER BRICK
NORMANEDGE CAP END
BRICKNORMAN
1.5 FLAT BRICK
The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.
NB 0.0.A1
NewBrick Norman Dimensions
NOTE:1. NEWBRICK HAS A MINIMUM THICKNESS OF
1 1/8 in (29mm). UNLESS OTHERWISE NOTED.
2. NEWBRICK HAS A 3/8 IN (9.5mm) HORIZONTAL ALIGNMENT GUIDE.
NewBrick®
11 5/8"
1 5/8"
2 1/4"
1 1/8"
3 5/8"
2 1/4"
2 1/4"2 1/4"
3 5/8"
3 5/8"
11 5/8"
11 5/8"
3 5/8"
2 1/4"
2 1/4"
3 5/8"NORMAN
LEFT 135° INSIDECORNER BRICK
11 5/8"
11 5/8"
2 1/4"
11 5/8"
11 5/8"
NORMANRIGHT CORNER BRICK
NORMANFLAT BRICK
11 5/8"
2 1/4"
1 1/8"
NORMANEND BRICK
NORMANCORNER BRICK
NORMANEDGE CAP
BRICK
NORMANLEFT 135° OUTSIDE
CORNER BRICK
NORMANEDGE CAP END
BRICKNORMAN
1.5 FLAT BRICK
The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.
NB 0.0.A1
NewBrick Norman Dimensions
NOTE:1. NEWBRICK HAS A MINIMUM THICKNESS OF
1 1/8 in (29mm). UNLESS OTHERWISE NOTED.
2. NEWBRICK HAS A 3/8 IN (9.5mm) HORIZONTAL ALIGNMENT GUIDE.
NewBrick®
11 5/8"
1 5/8"
2 1/4"
1 1/8"
3 5/8"
2 1/4"
2 1/4"2 1/4"
3 5/8"
3 5/8"
11 5/8"
11 5/8"
3 5/8"
2 1/4"
2 1/4"
3 5/8"NORMAN
LEFT 135° INSIDECORNER BRICK
11 5/8"
11 5/8"
2 1/4"
11 5/8"
11 5/8"
NORMANRIGHT CORNER BRICK
NORMANFLAT BRICK
11 5/8"
2 1/4"
1 1/8"
NORMANEND BRICK
NORMANCORNER BRICK
NORMANEDGE CAP
BRICK
NORMANLEFT 135° OUTSIDE
CORNER BRICK
NORMANEDGE CAP END
BRICKNORMAN
1.5 FLAT BRICK
The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.
NB 0.0.A1
NewBrick Norman Dimensions
NOTE:1. NEWBRICK HAS A MINIMUM THICKNESS OF
1 1/8 in (29mm). UNLESS OTHERWISE NOTED.
2. NEWBRICK HAS A 3/8 IN (9.5mm) HORIZONTAL ALIGNMENT GUIDE.
NewBrick®
11 5/8"
1 5/8"
2 1/4"
1 1/8"
3 5/8"
2 1/4"
2 1/4"2 1/4"
3 5/8"
3 5/8"
11 5/8"
11 5/8"
3 5/8"
2 1/4"
2 1/4"
3 5/8"NORMAN
LEFT 135° INSIDECORNER BRICK
11 5/8"
11 5/8"
2 1/4"
11 5/8"
11 5/8"
NORMANRIGHT CORNER BRICK
NORMAN
The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.
NB 0.0.A2
NewBrick Utility Dimensions
NOTE:1. NEWBRICK HAS A MINIMUM THICKNESS OF
1 1/8 in (29mm). UNLESS OTHERWISE NOTED.
2. NEWBRICK HAS A 3/8 IN (9.5mm) HORIZONTAL ALIGNMENT GUIDE.
NewBrick®
UTILITYFLAT BRICK
1 1/8"
3 5/8"
UTILITYEND BRICK
UTILITYLEFT CORNER BRICK
UTILITYEDGE CAP
BRICK
UTILITYLEFT 135° OUTSIDE
CORNER BRICK
UTILITYEDGE CAP END
BRICK
UTILITY1.5 FLAT BRICK
UTILITYLEFT 135° INSIDECORNER BRICK
11 5/8"
11 5/8"
1 5/8"
1 1/8"
3 5/8"
2 1/4"
3 5/8"
3 5/8"
11 5/8"
3 5/8"
11 5/8"
11 5/8"
2 1/4"
11 5/8"
3 5/8"
3 5/8"
3 5/8"
3 5/8"
3 5/8"
3 5/8"
UTILITYRIGHT CORNER BRICK
11 5/8" 11 5/8"
The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.
NB 0.0.A2
NewBrick Utility Dimensions
NOTE:1. NEWBRICK HAS A MINIMUM THICKNESS OF
1 1/8 in (29mm). UNLESS OTHERWISE NOTED.
2. NEWBRICK HAS A 3/8 IN (9.5mm) HORIZONTAL ALIGNMENT GUIDE.
NewBrick®
UTILITYFLAT BRICK
1 1/8"
3 5/8"
UTILITYEND BRICK
UTILITYLEFT CORNER BRICK
UTILITYEDGE CAP
BRICK
UTILITYLEFT 135° OUTSIDE
CORNER BRICK
UTILITYEDGE CAP END
BRICK
UTILITY1.5 FLAT BRICK
UTILITYLEFT 135° INSIDECORNER BRICK
11 5/8"
11 5/8"
1 5/8"
1 1/8"
3 5/8"
2 1/4"
3 5/8"
3 5/8"
11 5/8"
3 5/8"
11 5/8"
11 5/8"
2 1/4"
11 5/8"
3 5/8"
3 5/8"
3 5/8"
3 5/8"
3 5/8"
3 5/8"
UTILITYRIGHT CORNER BRICK
11 5/8" 11 5/8"
The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.
NB 0.0.A2
NewBrick Utility Dimensions
NOTE:1. NEWBRICK HAS A MINIMUM THICKNESS OF
1 1/8 in (29mm). UNLESS OTHERWISE NOTED.
2. NEWBRICK HAS A 3/8 IN (9.5mm) HORIZONTAL ALIGNMENT GUIDE.
NewBrick®
UTILITYFLAT BRICK
1 1/8"
3 5/8"
UTILITYEND BRICK
UTILITYLEFT CORNER BRICK
UTILITYEDGE CAP
BRICK
UTILITYLEFT 135° OUTSIDE
CORNER BRICK
UTILITYEDGE CAP END
BRICK
UTILITY1.5 FLAT BRICK
UTILITYLEFT 135° INSIDECORNER BRICK
11 5/8"
11 5/8"
1 5/8"
1 1/8"
3 5/8"
2 1/4"
3 5/8"
3 5/8"
11 5/8"
3 5/8"
11 5/8"
11 5/8"
2 1/4"
11 5/8"
3 5/8"
3 5/8"
3 5/8"
3 5/8"
3 5/8"
3 5/8"
UTILITYRIGHT CORNER BRICK
11 5/8" 11 5/8"
The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.
NB 0.0.A2
NewBrick Utility Dimensions
NOTE:1. NEWBRICK HAS A MINIMUM THICKNESS OF
1 1/8 in (29mm). UNLESS OTHERWISE NOTED.
2. NEWBRICK HAS A 3/8 IN (9.5mm) HORIZONTAL ALIGNMENT GUIDE.
NewBrick®
UTILITYFLAT BRICK
1 1/8"
3 5/8"
UTILITYEND BRICK
UTILITYLEFT CORNER BRICK
UTILITYEDGE CAP
BRICK
UTILITYLEFT 135° OUTSIDE
CORNER BRICK
UTILITYEDGE CAP END
BRICK
UTILITY1.5 FLAT BRICK
UTILITYLEFT 135° INSIDECORNER BRICK
11 5/8"
11 5/8"
1 5/8"
1 1/8"
3 5/8"
2 1/4"
3 5/8"
3 5/8"
11 5/8"
3 5/8"
11 5/8"
11 5/8"
2 1/4"
11 5/8"
3 5/8"
3 5/8"
3 5/8"
3 5/8"
3 5/8"
3 5/8"
UTILITYRIGHT CORNER BRICK
11 5/8" 11 5/8"
UTILITY
The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.
NB 0.0.01
NewBrick Modular Dimensions
7 5/8"
2 1/4"
NOTE:1. NEWBRICK HAS A MINIMUM THICKNESS OF
1 1/8 in (29mm). UNLESS OTHERWISE NOTED.
2. NEWBRICK HAS A 3/8 IN (9.5mm) HORIZONTAL ALIGNMENT GUIDE.
3. For additional NEWBRICK sizes see Appendix A.
NewBrick®
7 5/8"
1 5/8"
MODULARFLAT BRICK
7 5/8"
3 5/8"
1 1/8"
MODULAREND BRICK
MODULARLEFT CORNER BRICK
MODULAREDGE CAP BRICK
MODULARLEFT 135° OUTSIDE
CORNER BRICK
MODULARLEFT 135° INSIDECORNER BRICK
MODULAR1.5 FLAT BRICK
MODULAREDGE CAP END
BRICK
MODULARRIGHT CORNER BRICK
7 5/8"
2 1/4"
1 1/8"
3 5/8"
2 1/4"
2 1/4"
2 1/4"
2 1/4"
2 1/4"
2 1/4"
7 5/8"
3 5/8"
7 5/8"
7 5/8"7 5/8"
3 5/8"3 5/8"
The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.
NB 0.0.01
NewBrick Modular Dimensions
7 5/8"
2 1/4"
NOTE:1. NEWBRICK HAS A MINIMUM THICKNESS OF
1 1/8 in (29mm). UNLESS OTHERWISE NOTED.
2. NEWBRICK HAS A 3/8 IN (9.5mm) HORIZONTAL ALIGNMENT GUIDE.
3. For additional NEWBRICK sizes see Appendix A.
NewBrick®
7 5/8"
1 5/8"
MODULARFLAT BRICK
7 5/8"
3 5/8"
1 1/8"
MODULAREND BRICK
MODULARLEFT CORNER BRICK
MODULAREDGE CAP BRICK
MODULARLEFT 135° OUTSIDE
CORNER BRICK
MODULARLEFT 135° INSIDECORNER BRICK
MODULAR1.5 FLAT BRICK
MODULAREDGE CAP END
BRICK
MODULARRIGHT CORNER BRICK
7 5/8"
2 1/4"
1 1/8"
3 5/8"
2 1/4"
2 1/4"
2 1/4"
2 1/4"
2 1/4"
2 1/4"
7 5/8"
3 5/8"
7 5/8"
7 5/8"7 5/8"
3 5/8"3 5/8"
The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.
NB 0.0.01
NewBrick Modular Dimensions
7 5/8"
2 1/4"
NOTE:1. NEWBRICK HAS A MINIMUM THICKNESS OF
1 1/8 in (29mm). UNLESS OTHERWISE NOTED.
2. NEWBRICK HAS A 3/8 IN (9.5mm) HORIZONTAL ALIGNMENT GUIDE.
3. For additional NEWBRICK sizes see Appendix A.
NewBrick®
7 5/8"
1 5/8"
MODULARFLAT BRICK
7 5/8"
3 5/8"
1 1/8"
MODULAREND BRICK
MODULARLEFT CORNER BRICK
MODULAREDGE CAP BRICK
MODULARLEFT 135° OUTSIDE
CORNER BRICK
MODULARLEFT 135° INSIDECORNER BRICK
MODULAR1.5 FLAT BRICK
MODULAREDGE CAP END
BRICK
MODULARRIGHT CORNER BRICK
7 5/8"
2 1/4"
1 1/8"
3 5/8"
2 1/4"
2 1/4"
2 1/4"
2 1/4"
2 1/4"
2 1/4"
7 5/8"
3 5/8"
7 5/8"
7 5/8"7 5/8"
3 5/8"3 5/8"
The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.
NB 0.0.01
NewBrick Modular Dimensions
7 5/8"
2 1/4"
NOTE:1. NEWBRICK HAS A MINIMUM THICKNESS OF
1 1/8 in (29mm). UNLESS OTHERWISE NOTED.
2. NEWBRICK HAS A 3/8 IN (9.5mm) HORIZONTAL ALIGNMENT GUIDE.
3. For additional NEWBRICK sizes see Appendix A.
NewBrick®
7 5/8"
1 5/8"
MODULARFLAT BRICK
7 5/8"
3 5/8"
1 1/8"
MODULAREND BRICK
MODULARLEFT CORNER BRICK
MODULAREDGE CAP BRICK
MODULARLEFT 135° OUTSIDE
CORNER BRICK
MODULARLEFT 135° INSIDECORNER BRICK
MODULAR1.5 FLAT BRICK
MODULAREDGE CAP END
BRICK
MODULARRIGHT CORNER BRICK
7 5/8"
2 1/4"
1 1/8"
3 5/8"
2 1/4"
2 1/4"
2 1/4"
2 1/4"
2 1/4"
2 1/4"
7 5/8"
3 5/8"
7 5/8"
7 5/8"7 5/8"
3 5/8"3 5/8"
MODULAR
One Energy Way, West Warwick, RI 02893Phone : 800-556-7752
™
1.0 Modular Mosaic
©
The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.
Dryvit Systems, Inc.Issued: 5/2021
NewBrick™
NB DETAIL
1.0 MODULAR FLAT
NOTES:
1. AT THIS TIME THE MOSAIC IS ONLYAVAILABLE IN 1.0 MODULAR SIZE.
1
PER SQUARE FOOT 6.75 MODULAR BRICKS
COVERAGE DATA PER MODULAR MOSAIC
PER MOSAIC 12 MODULAR BRICKS (1.78 FT2)
PER BUNDLE 96 MODULAR BRICKS OR 8 MODULAR MOSAICS (14.22 FT2)
2 1/4"
1 1/8"7 5/8"
23 5/8"27 5/8"
10 11/16"
FIRST COURSE
BACK VIEW
1234
FRONT VIEW
3/8" NEWBRICK ADHESIVE,FIELD APPLIED
DB GLUE,FACTORY APPLIED
MOSAIC MESH,FACTORY APPLIED
END GLUE,FACTORY APPLIED
NOTE: THE FIRST ANDTHIRD COURSE ARE TOTHE LEFT WHEN VIEWEDFROM THE FRONT SIDE.
One Energy Way, West Warwick, RI 02893Phone : 800-556-7752
™
1.0 Modular Mosaic Soldier
©
The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.
Dryvit Systems, Inc.Issued: 5/2021
NewBrick™
NB DETAIL
1.0 MODULAR FLAT
NOTES:
1. AT THIS TIME THE MOSAIC SOLDIER ISONLY AVAILABLE IN 1.0 MODULAR SIZE.
1
PER SQUARE FOOT 6.75 MODULAR BRICKS
COVERAGE DATA PER MODULAR MOSAIC SOLDIER
PER MOSAIC SOLDIER 9 MODULAR BRICKS (1.34 FT2)
PER BUNDLE 72 MODULAR BRICKS OR 8 MODULAR MOSAIC SOLDIERS (10.67 FT2)
1 1/8" 2 1/4"
24"
7 5/8"
MODULAR MOSAIC MODULAR MOSAIC SOLDIER
Tru by Hilton HotelManchester, New Hampshire
ChallengeCold New England winters can lead to prolonged downtime of construction sites. In the heart of downtown Manchester, New Hampshire, construction of a Tru by Hilton hotel was slated to begin but needed systems and products that could withstand the conditions.
SolutionThe construction team chose NewBrick® insulated brick veneer and Dryvit® Outsulation® Plus MD continuous insulation (CI) systems for their performance and installation advantages. Securock® ExoAir® 430 panels were chosen to assist with critical path reduction and meet shell dry-in goals.
Installing NewBrick was seamless for installer Creative Walls, who had previously worked with thin brick. Heavy claddings, shelf angles, lintels, and brick ties add cost and installation time to wood frame buildings, like Tru by Hilton. NewBrick, on the other hand, is lightweight, making it faster to install with added insulation value, enabling a faster turnaround and lower operating costs for the owner. With all of these benefits and the beautiful aesthetic outcome, the Tru by Hilton hotel project proved a great success.
PROJECT PROFILE:
Completion Date August 1st, 2020
Project Type New Construction
Project Size 30,000 square feet
Building Type Hotel
Tremco CPG Products Used
NewBrick® Tibur Stone™
Reflectit™ Dymonic® 100Spectrem® 3 ProGlaze® ETADemandit® Advantage Securock® ExoAir® 430Outsulation® Plus MDExoAir 230®
A quicker whole wall installationmeans earlier dry-in for thebuilding, so interior work canbegin ahead of schedule.
Securock ExoAir 430 pre-applied air barrier sheathing panels reduce job site challenges and simplify the air barrier installation.
2020 EIMA Hero Project Award Winner
All the jobsite efficiency gains. All the weight reduction. All the material handling and labor savings of standard NewBrick flats... times twelve.
NewBrick modular mosaic takes NewBrick’s speed of installation and ease-of-use to the next level by prefabricating twelve individual NewBrick modular flats into new mosaic shapes — modular and modular soldier.
Each prefabricated modular mosaic sheet enables a single person to install 12x the area vs. installing a single NewBrick modular flat one at a time — significantly reducing the number of “touches” per installation.
Mosaic Overview
Mosaic Features & Benefits• 12x the placement speed of mosaic modular vs a
single NewBrick modular flat • 9x the placement speed of mosaic modular soldier
vs a single NewBrick modular flat• Designed for single person installation• Mosaic modular & mosaic modular soldier come in
both solid colors, as well as standard blends — to eliminate blending in the field
• 12-unit modular mosaic measures 10 1/8” x 27 5/8” • 9-unit modular mosaic soldier measures 7 5/8” x 24”• Saves on materials and significantly reduces freight• Superior insulating qualities vs. traditional brick• Design flexibility
NEWBRICK™ MODULAR MOSAIC All the Material Handling and Labor Savings of NewBrick, Times Twelve.
Modular Mosaic
Modular Mosaic Soldier
One Energy Way, West Warwick, RI 02893Phone : 800-556-7752
™
1.0 Modular Mosaic
©
The architecture, engineering, and design of the project using theDryvit products is the responsibility of the project's designprofessional. All systems must comply with local building codes andstandards. This detail is for general information and guidance onlyand Dryvit specifically disclaims any liability for the use of this detailand for the architecture, design, engineering or workmanship of anyproject. The project design professional determines, in its solediscretion, whether this detail or a functionally equivalent detail isbest suited for the project. Use of a functionally equivalent detail doesnot violate Dryvit's warranty. This detail is subject to change withoutnotice. Contact Dryvit to ensure you have the most recent version.
Dryvit Systems, Inc.Issued: 3/2021
NewBrick™
NB DETAIL
1.0 MODULAR FLAT BRICK
NOTES:
1. AT THIS TIME THE MOSAIC IS ONLYAVAILABLE IN 1.0 MODULAR SIZE.
1
PER SQUARE FOOT 6.75 BRICKS
COVERAGE DATA
PER MOSAIC 12 BRICKS (1.78 FT2)
PER BUNDLE 96 BRICKS OR 8 MOSAICS (14.22 FT2)
2 1/4"
1 1/8"7 5/8"
23 5/8"27 5/8"
10 1/8"
Significant Reduction in Installer TouchesA timestudy showed that installer “touches” were reduced from 432 with single-unit NewBrick modular flats — down to 36 for the 12-unit modular mosaic.
NEWBRICK MODULAR MOSAICCOVERAGE DATA
Per ft2 6.75 bricks
Per mosaic 12 bricks (1.78 ft2)
Per bundle96 bricks / 8 mosaics (14.22 ft2)
In early 2021, Dryvit conducted a detailed time study to determine the true time savings of NewBrick mosaic placement vs. single NewBrick modular flats. Because NewBrick and Dryvit are now part of Tremco Construction Product Group (CPG), testing was done at the group’s one-of-a-kind, accredited Sustainable Building Solutions Test Facility in Cleveland, OH.
When installing 12-unit modular mosaic units, the study showed there was a +/- 60% placement productivity increase vs. single NewBrick modular flats.
And when testing blended-colors, the 12-unit modular mosaic units increased placement productivity by +/- 73% over single modular flats, when accounting for pre-blending colors and then installing.
Amazingly, overall installation placement “touches” were reduced from 432 for single-unit modular flats to 36 for the 12-unit modular mosaic.
Time and Labor Savings Study Overview
“ We were excited that we were able to preserve the look of our campus and solve our problem.”
Danielle Tracy Executive director of operations Owens Community College
“ In going up six stories on this hotel, we knew that we had to come up with a thin veneer. And we looked to NewBrick for that solution. It turned out great.”
Michael Hoying General contractor Brackett Builders
“ NewBrick is amazing. The biggest benefit to our project was the ease and speed of installation. The finished product mimics brick exactly. We are happy, and the ownership loves it.”
Luke Westbrook Project manager Crossroads Construction
See what our clients are saying
Owens Community College | Perrysburg, OH
Hampton Inn and Suites | Kansas City, MO
Fairfield Inn and Suites | Dayton, OH
Drvyit® is a registered trademark of Dryvit Systems, Inc. Use of the ® symbol indicates registration with the US Patent & Trademark Office and the Canadian Intellectual Property Office.
tremcocpg.com
Tremco Construction Products Group (CPG) brings together Tremco Incorporated’s Commercial Sealants & Waterproofing and Roofing & Building Maintenance operating divisions; Dryvit Systems, Inc.; Nudura Inc.; Willseal; Weatherproofing Technologies, Inc. and Weatherproofing Technologies Canada, Inc.
DS277 06/21
Dryvit Systems, Inc. | One Energy Way | West Warwick, RI 02893 | 401.822.4100 | dryvit.comDryvit Systems Canada Division, RPM Canada | 200 Confederation Parkway, Unit 1 | Concord, ON L4K 4T8 | 800.263.3308 | dryvit.ca