new - viskas elektronikai · lighting unit swit h multi funtion wheel swit h already found on many...
TRANSCRIPT
H7.2 & H7R.2
NEW H7.2 & H7R.2
HEADLAMP SERIES
Brighter
Smarter
More durable
More comfortable
upgrade
LED Lenser’s design team in Germany took their best-selling H7 headlamp and set themselves a challenge – to make it even better. The result is the new H7.2 and H7R. 2, incredible headlamps that blow their predecessors out of the water.
H7.2 & H7R.2
NEW LED CHIP
The H7.2 and H7R.2 feature LED Lenser’s NEW High End Power LED Chips,
which are substantially improved compared to the previous LED Chips.
NEWLY CALCULATED LENS
The reflector lens of the Advanced Focus System® has been enlarged and
especially adapted to fit the new LED-Chip. The beam is focussed by
rotating the head of the lamp.
ADVANTAGES OF THE NEW LENS
Larger, more even light beam
Better close range illumination
Wider beam angle
Wider area illuminated when in focussed long-distance beam
More lumens = brighter light
Brighter Smarter
PERFORMANCE COMPARED
H7 H7.2 H7R H7R.2
LUMINOUS FLUX
Boost: High: Low:
180 lm
250 lm 200 lm
20 lm
200 lm
300 lm 200 lm
20 lm
BURN TIME
Boost: High: Low:
85 hrs
7 hrs 12 hrs 60 hrs
40 hrs
6 hrs 14 hrs 60 hrs
BEAM DISTANCE
Boost: High: Low:
140 m 160 m 140 m
50 m
150 m 160 m 140 m
50 m
Comparison of performance: old models versus upgrades
H7.2 & H7R.2
Smart Light Technology (SLT) now included in H7 series
Brighter Smarter
The H7.2 and H7R.2 have 3 different light programs, which you choose using the multi-function wheel switch. You then use the lighting unit
switch to click between the
different functions in that
program.
2 additional light functions (boost and dim) are controlled separately
(as explained below)
LIGHTING UNIT SWITCH MULTI FUNCTION WHEEL SWITCH
Already found on many LED Lenser models, the new H7.2 and H7R.2 now feature Smart Light Technology (SLT), which enables you to switch between 3 light programmes and offers 5 different light functions (100% light, 15% light, signal, dim, boost).
The SLT functions are controlled by both the lighting unit switch (on/off button) and the multi-function wheel switch.
LIGHT PROGRAMS
LIGHTING UNIT SWITCH
Controls:
Boost function – no matter what program you are in,
simply hold down the lighting unit switch for 5 seconds
when the light is on to get the maximum amount of
light available.
Transport Lock – means the light can’t be switched on
by accident. To engage/disengage transport lock, hold
down the lighting unit switch for 5 seconds when the
light is off.
Switching between different light functions in each light
program.
MULTI FUNCTION WHEEL SWITCH
Controls:
Dim function – you can adjust the light intensity of low
power, high power and boost functions (as far down as 5
lumens) by turning the wheel.
The flashing rate of signal function (blink to strobe) can
be adjusted by turning the wheel
Switch between light programs (Easy Low, Easy Power,
Signal) – Press and hold for 5 seconds to change light
program – the light will blink once, twice or three times
to indicate which mode you are in.
H7R.2 only
Rear light—option of a red light or a blinking red light. Click the button on the wheel once for on, click again quickly for blink
Charging indicator—wheel switch LED glows red while charging, green when fully charged
Battery indicator—when lamp first turned on, wheel switch LED glows for 5 seconds to show battery level (illustrated left)
Switch between 2 energy modes—energy savings (ES) or constant current (CC). Click on the wheel switch 8 times and then hold down on the 8th click to change modes. If the light comes on and then goes out suddenly you are in CC mode; if it fades away you are in ES mode.
H7.2 & H7R.2
ON/OFF SWITCH
The button is now larger and made of rubber, making it easier to op-erate while wearing gloves.
TILT MECHANISM The tilt mechanism has been revised and is now even more durable. It holds firmly in place once the head-lamp is on your head.
More Durable
HIGHLY FLEXIBLE CABLING The cabling of the H7.2 and H7R.2 has been completely re-designed. Areas exposed to a lot of strain are now a lot tougher and more flexible due to higher quality materials and design.
H7.2 & H7R.2
you’ll forget you’re wearing a headlamp
SO ERGONOMICAL
DYNAMIC FOAM TEXTURE The back of the light unit is contoured and lined in ‘skin friendly’ PU-Foam that snuggly adapts to each users forehead.
More Comfortable
EVERY HEAD IS DIFFERENT …
...that’s why the shape of the new LED LENSER® (HR.2 & HR7.2) adjusts itself perfectly to the different shape of each head.
ERGONOMIC DESIGN—OPTIMIZED WEARING COMFORT
The new mounting system mimics the natural shape of your head. A specially curved battery case and a branched headband fastener provides greater comfort - especially for active users!
H7.2 & H7R.2
Overview: H7.2 Specifications Overview: H7R.2 Specifications
H7.2
Packaging: Gift Box Code: LED7297 Packaging: Test it blister Code: LED7397
Newly calculated lens for optimised illumination
High End Power LED Smart Light Technology (SLT) - 3 light programs - 5 light options
Advanced Focus System® (AFS)
Low Battery Message System—(light will blink 3 times every 15 seconds)
Multi-function wheel switch Transport Lock
Splash-protected IPX4
Redesigned and durable cabling
Boost to 250 lumens
5 year worldwide warranty
WEIGHT 164 g
LUMINOUS FLUX Boost: 250 lm High: 200 lm Low: 20 lm
BATTERIES 4 X AAA 1.5v Batteries
BURNING LIFE Boost: 7 hrs High: 12 hrs Low: 60 hrs
BEAM DISTANCE Boost: 160 m High: 140 m Low: 50 m
LENS SYSTEM Advanced Focus System
SMART LIGHT TECHNOLOGY SLT
SPLASH PROTECTION IPX 4
TECHNICAL DATA H7.2
H7.2 & H7R.2
Overview: H7.2 Specifications Overview: H7R.2 Specifications Newly calculated lens for optimised illumination High End Power LED Smart Light Technology (SLT) - 3 light programs - 5 light options Two different energy modes—Constant Current (CC)
and Energy Saving (ES) Advanced Focus System® (AFS) Low Battery Message System—(light will blink 3 times every 15 seconds) Multi-Function wheel switch Transport Lock Rear light (option of red or blinking red) Splash-protected IPX4 Redesigned and durable cabling Battery indicator Can also run on AAA batteries in addition to
rechargeable lithium pack Boost to 300 lumens USB port for easy recharging 5 year worldwide warranty
H7R.2
Packaging: Gift Box Code: LED7298
LED intensity remains constant until battery depleted
2. Constant Current Mode (CC)
Lum
ens
(lm
)
Time (h)
LED intensity gradually fades, long lasting
1. Energy Saving Mode (ES)
Lum
ens
(lm
)
Time (h)
WEIGHT 164 g
LUMINOUS FLUX Boost: 300 lm High: 200 lm Low: 20 lm
BATTERIES Lithium Ion Rechargeable Battery
BURNING LIFE Boost: 6 hrs High: 14 hrs Low: 60 hrs
BEAM DISTANCE Boost: 160 m High: 140 m Low: 50 m
LENS SYSTEM Advanced Focus System
SMART LIGHT TECHNOLOGY SLT (CC & ES)
SPLASH PROTECTION IPX 4
TECHNICAL DATA H7R.2
H7.2 & H7R.2 Tight Lines Ltd
PO Box 304, Napier 4140 Email: [email protected] Website: www.tightlines.co.nz
Phone: (06) 843 6388 Fax FREE: 0800 329 329
Proudly distributed in New Zealand by Tight Lines Ltd.
Comparison of Features: H7.2 versus H7R.2
Please note: the performance figures given throughout this brochure are average values that may vary +/- 15%
Features LED LENSER® H7.2 LED LENSER® H7R.2
High End Power LED
Smart Light Technology
Advanced Focus System
Transport Lock
Turning Focus
Multi-function ‘Wheel Switch’
Front switch
Rear Light (red or blinking) -
Battery indicator - Lights up when turned on
Low Battery Message System Blinking Front-LED Blinking Front-LED
Rechargeable -
Constant Current/Energy Saving -
Redesigned and durable cabling
Splash-protected IPX 4
5 year worldwide warranty