new remote power controllers from multi-link

1

Click here to load reader

Upload: scott-shelton

Post on 20-May-2015

1.846 views

Category:

Devices & Hardware


1 download

DESCRIPTION

With an increasing number of remote devices deployed in-band and out-of-band within network platforms, companies need reboot solutions using one or both methods---and Multi-Link has them. Multi-Link’s remote power controllers help IT administrators improve device uptime, increase problem response time, extend equipment life, and save travel, labor, and energy costs.

TRANSCRIPT

Page 1: New Remote Power Controllers  from Multi-Link

Powerful Benefits

Reduce Costly On-Site Visits - Rebootremote AC powered equipment as first step in troubleshooting

Reduce Downtime - Restore/Resetpower to remote devices in minutesinstead of hours

Instant R.O.I. - Pays for itself withone saved service visit

Control Power Consumption - Saveenergy by turning equipment off whennot in use; Extends equipment life

Powerful Benefits

122 Dewey Drive - Nicholasville, KY 40356www.multi-link.net - 800-535-4651

In-Band Control: IP Power Stone 4000

Out-of-Band Control: The Power Stone

IP4000

PST59102

The IP4000 is a two outlet remote AC power controller with browser interface. The primary feature of the device allows remote power control of two AC power outlets using a web browser. This device is a perfect tool for IT personnel managing remote devices across a building or across the globe. The IP4000 provides the ability to either manually control power remotely over the internet, automaticallyby network fault detection, auto-scheduling, or MSN chat.Features: Multiple control options; Supports multiple protocols; 2 outlets; Sequential power reboot; Event logging; 100 ~ 250 VAC 10 Amps

The Power Stone is a phone call activated remote AC power controller and can perform a variety of power control functions to any connected equipment. It can power up, power down, or reboot remote equipment through an existing phoneline either automatically or manually and does not need a dedicated phone line to operate. And, it’s as simple to use as a telephone.Features: Remote reboot, power up/down using an exisitng phone line; Remote programming; No software or drivers; Manual and automatic reboot modes ; User defined security code for remote access; 120VAC, 15 Amps

New Remote Power Controllers from Multi-Link Inc.

With an increasing number of remote devices deployedin-band and out-of-band within network platforms, companies need reboot solutions using one or both methods---and Multi-Link has them. Multi-Link’s remote power controllers help IT administrators improve deviceuptime, increase problem response time, extend equipment life, and save travel, labor, and energy costs.

The Power Stone and the Internet Power Stonegive IT departments multiple control options by browser, phone, auto fault detection, scheduling, and even MSN chat. Affordable yet invaluable, Multi-Link puts remote networks back in your control.

Call us to start cutting costs now...

800.535.4651Ask about a

Free evaluation!