new product bulletin - clipsalupdates.clipsal.com/clipsalonline/files/brochures/g0000122.pdf ·...

NEW PRODUCT BULLETIN

NOVEMBER 2012

56 Series™ Plug and Socket ConnectorsNEW

Scalable and flexible soft wiring

CABLE MANAGEMENT

A new mounting solution

C-BUS 360º SURFACE-MOUNT

DETECTORS

Smarter LED downlights

LED LIGHTING

Smooth, flicker-free dimming

DIMMERSACCESSORIES

Your contemporary modular solution

2

Hello and welcome to the latest edition of Clipsal’s New Product Bulletin – showcasing the latest product offerings and electrical solutions for your customers. Clipsal has an ongoing commitment to electrical contractors like yourself, to provide innovative products that lead market trends and add value to your business.

It's a very exciting time to be an electrical contractor, with new technology readily available and large government initiatives to drive business in both the residential and commercial sectors, such as the NBN rollout and the Renewable Energy Scheme.

The skyrocketing cost of electricity has lead to energy efficiency becoming the most talked about solution for your customers' homes. You've probably even seen an increase in customer inquiries regarding energy-efficient lighting, energy monitoring and solar inverters to help reduce their electricity bills. With accredited training and Clipsal's energy efficiency product range, you could easily position yourself as an energy efficiency expert. Simply talk to your Clipsal Rep about what options are available.

Your customers expect you to deliver advice on everything from architectural switch plates and dimmers, to Infrascan Motion Sensors, dimmable LEDs, data cabling, solar solutions and energy monitoring devices. You are clearly more than a tradesman; you’re an electrical consultant, a salesperson, a technician and an engineer. So, keeping that in mind, Clipsal's job is to make your job easier — to help you deliver reliable electrical solutions, on time and within budget.

As you flick through the New Product Bulletin, you’ll see that every product featured is designed to make your next installation even easier than the time before. And with all the new technological developments, you’ll also see ample opportunity to upsell to your customers so they are well prepared for the future.

In particular, you'll see that Clipsal's energy-efficient Sunset Switches, 8W LED downlights and GT Inverters, along with the Ecomind Electricity Monitors, will save your customers money in the long run. All of these products, and more, can be downloaded straight to your desktop in Clipsal’s eCatalogue. Or you can download the iCat app for smartphones – suitable for Apple iOS and Android. With "on the spot" quotes from your smartphone, it has never been easier to turn jobs around!

Finally, I would like to mention Clipsal's Don't Risk It! campaign. Non-compliant product awareness is essential, as these products have the potential to put your customers in harm's way, and cause irreparable damage to their homes and your business. Please continue to support the brands that support the electrical industry. I invite you to visit Clipsal's manufacturing site at Gepps Cross, where you will see core products being made locally and how they are tested to meet Australian Standards.

On behalf of everyone at Clipsal by Schneider Electric, I’d like to thank you for your ongoing support and I look forward to seeing you soon.

What an exciting time to be an electrical contractor!

Grantley White

Sales Director Clipsal & Schneider Electric Partner Business

3

Strato 8000 Series™

Your contemporary modular solutionCatalogue Numbers

REFER TO STRATO BROCHURE

Catalogue Numbers

REFER TO MODENA BROCHURE

Product Features

M8082LHA-WE

S8083LHA-WE

Modena 8000 Series™

Your complete modular solutionProduct Features Whether it’s for a new dream home, or you're renovating and creating

the perfect living space, the job won’t be finished until you include the timeless and sophisticated Clipsal Modena 8000 Series. The large, soft-resistance switch mechanism provides easier operation and practical functionality for all users. The range of finishes, colours and configurations suit any décor and will complement any residential or commercial environment.

Over 200 custom configurations

Compatible with 30 Mech products

Curved plate design

Blue LED indicator lights as standard

Seven interchangeable colour surrounds

The Clipsal Strato 8000 Series Switch range provides the flexibility of modular design, with all the benefits the Australian contractor has come to expect. With a large range of pre-configured standard installation products available, large terminals, 84mm mounting centres and a colour pallet inspired by Laminex®, this range is designed for the Australian market.

Over 200 custom configurations

Compatible with 30 Mech products

Flat plate design

Blue LED indicator lights as standard

10 standard Laminex interchangeable colour surrounds

Optional Laminex custom colour selection

4

Impressive 250V a.c. 20A/16AX capacity

Suitable for fluorescent loads up to 16AX

Compatible with all 30 Series apertures

Suitable for new-build and retrofit projects

Terminals can accommodate 3 x 2.5mm2 conductors

One-way/two-way switching facility with looping terminal

Also available as a bell-press mechanism

Product Features Clipsal revolutionised the electro-mechanical switch by introducing push-button mechanisms to the market. The offer was enhanced with the release of fully assembled Impress Switches in the stylish Slimline and Eclipse models.

Today, your customers have even more choice, as Clipsal has expanded its innovative Impress offer to include fully assembled 2000 Series and Classic C2000 Series Switches.

With a built-in Clipsal Integrally Switched Universal Dimmer now part of the Impress range, your customers will have complete lighting control, all from the push of a button.

Impress™ Push-ButtonSwitches & DimmersFully assembled 2000 Series™ and Classic C2000 Series™

2031VAPBL C2031VAPBL

415VF-WE

Auto-switched socket for automatic cut-off when plug is removed

New larger terminals accommodating up to 3 x 2.5mm2 wires

New flap design with flat face to provide a slimmer and sleek finish

Thicker gasket and new 20mm spacer for better installation on uneven surfaces

Coloured terminals for easier identification

Rear clip-on cable shroud for added terminal protection

Product Features Following caravan owners and manufacturers' advice, Clipsal has developed a new design for the Clipsal 415VF Caravan Socket Outlets.

Available in: • 10 amp, 415VF-WE (White) or 415VF-BK (Black) • 15 amp, 415VF15-WE (White).

415VF Caravan Socket OutletDon't be left out in the dark

Catalogue Numbers

415VF-WE Auto-Switched Caravan Socket Outlet IP34 10A White

415VF-BK Auto-Switched Caravan Socket Outlet IP34 10A Black

415VF15-WE Auto-Switched Caravan Socket Outlet IP34 15A White

415VFSM20-WE Deep Mounting Block 20mm White

Blue LED indicator option configurable to user requirements: • LED permanently ON • LED ON, switch OFF • LED ON, switch ON • LED ON, switch OFF (power available)

5

Electricity Monitor Display

Weatherproof robust housings (IP56 and IP66 ratings)

2-wire and 3-wire designs

10AX resistive and fluorescent load current

Robust and reliable construction

Default timer and lux level settings with variable adjustment options

Easy to install

Product Features Sunset Switches are a reliable and convenient light switching solution that will provide your customers with considerable energy savings, as lighting is never left on longer than required.

Clipsal Sunset Switches come in 2-wire and 3-wire designs, making them ideal for every commercial, residential and industrial application. The Sunset Switches feature a convenient dusk to dawn setting, ensuring easy installation set-up. Lighting will be activated at dusk and switched off at dawn. For increased energy efficiency, an inbuilt timer adjustment allows lighting to be activated for a preset time (2h, 4h, 6h, 8h). The lux level adjustment option allows flexibility regarding the mounting location. WS226SSR Series Sunset Switches are compatible with most pre-existing back boxes.

Weatherproof Sunset SwitchesSee the light in saving energy

WS226SSR/2-RG

Display electricity usage in dollars ($), kilowatt (kWh) and carbon tonnes (KgCO2)

Monitor hourly, daily, weekly, monthly and average data

Available with a battery or mains-powered transmitter

Additional CT sensors available for three-phase installations

Product Features (Display, Transmitter, CT Sensors)

MONITOR electricity consumption REDUCE energy use SAVE money on electricity bills

Ecomind Electricity MonitorSave up to 10% on electricity bills

Catalogue Numbers

EM422EM-E-KMTS Kit with mains-powered transmitter

EM422EM-E-KBTS Kit with battery-powered transmitter

Catalogue Numbers

WS226SSR/2-RG Weathershield, 2-Wire design

WS226SSR/3-RG Weathershield, 3-Wire design

56SSR/2-GY 56 Series, 2-Wire design

56SSR/3-GY 56 Series, 3-Wire design

31VSSR/2-WE Standard Series, 2-Wire design

31VSSR/3-WE Standard Series, 3-Wire design

31VSSR/2-WE56SSR/3-GY

Display electricity usage graphically

Create electricity reports

Set and track electricity targets

Manage/plan demand

View electricity consumption summaries/predictions

Create notes to explain peak or low electricity usage

Product Features (Electricity Monitoring Software)

Timer, Lux level setup

EM422S-12C90A Additional 90A CT-Sensor

EM422S-16C120A Additional 120A CT-Sensor

6

Designed to reduce visual clutter on the wall, the new integrally switched push-button and rotary controlled universal dimmers incorporate on/off switching and dimming control into one mechanism.

The dimming performance has been optimised to ensure smooth, linear, flicker-free dimming across the control range.

The new Clipsal Dimmers offer considerable flexibility. They can be used to control loads such as incandescent lamps, dichroic lamps and low voltage lighting that uses iron-core or electronic transformers, as well as selected dimmable LED and CFL lamps.

The integrally switched push-button and rotary controlled universal dimmers set new industry standards for control and reducing the space required in a wall plate. For further information on compatibilty, please visit clipsal.com/load

Push-Button and Rotary Controlled Universal Dimmer

Push-button or rotary controlled operation

Clipsal Universal Dimming Technology

350W power rating

Linear control across dimming range

Full short circuit protection

Wide range of plate styles and colours available

Suitable for new or retrofit applications

Inbuilt over-current and over-temperature protection

Immune to high frequency (ripple) signal injection on mains supply

Product Features

Space saving dimming controls

Push-Button Universal Dimmer Catalogue Numbers

Rotary Controlled Universal Dimmer Catalogue Numbers

C2031E2RUD-WE

4061E2PUDN-PW2031E2PUD-WEC2031E2PUD-WE

4061E2RUD-PW2031E2RUD-PW

31E2PUDM30 Series Mechanism

4061E2PUDMSaturn Mechanism

2031E2PUD2000 Series

C2031E2PUDClassic Series

SC2031E2PUDSlimline Series

SL2031E2PUDEclipse Series

4061E2PUDNSaturn Series

31E2RUDM30 Series Mechanism

P2031E2RUDMPrestige Mechanism

4061E2RUDMSaturn Mechanism

31E2RUDStandard Range

2031E2RUD2000 Series

C2031E2RUDClassic Series

SC2031E2RUDSlimline Series

SL2031E2RUDEclipse Series

P2031E2RUDPrestige Series

4061E2RUDSaturn Series

7

O.Erre Industrial Fans

The O.Erre range of industrial fans has been improved for better performance.

These fans can now achieve 10%-30% improved performance, depending on the model, and have an improved IP rating to ensure safe installation in all environments.

All models include long-life ball bearing motors.

Product Features

Safety protection grille

Steel body and grille protected by an epoxy-based anticorrosive paint

Nylon impeller for high performance

Catalogue Numbers

MD254M Fan W/Plate IP55 250mm S/Phase




TT254M Fan W/Plate IP44 250mm S/Phase



Updated and improved

MD254M TT254M

Slimline® Xtra Switch

The wait is over. Clipsal has responded to contractors' demands for a Slimline double power point, which has the ability to add any switch from its 30 Mech Series.

Introducing the SC2025XA, with a removable extra switch that enables the installer the flexibility to install the right 30 Mech for the job.

Now Slimline has the flexibility that Clipsal's other ranges have had for years.

Catalogue Numbers

SC2025XA Double socket with extra removable switch

Removable 30 Mech Version

SC2025XA

8

Deep Plastic Wall Box

Electrical accessories should be easy to install, however, some of the new smart products have deep terminal blocks and take up valuable wall box space. Products such as Saturn, dimmers, timers and Cat. 7A are space hungry. With this in mind, Clipsal has designed the extra deep plastic wall box- the 157/1PRMD.

Deep wall box for more wiring space

Product Features

157/1PRMD

157/1PRMD

Catalogue Numbers

157/1PRMD Moulded deep plastic wall box 1 gang with sliding nuts suitable for standard 84mm centre plates including Slimline (box depth 70mm)

9

Catalogue Numbers

L955W/8WH

L955W/8BC

L955C/8WH

L955C/8BC

L955WF/8WH

L955WF/8BC

L955CF/8WH

L955CF/8BC

540 lumen output

55º beam angle

35,000 hour lamp life

Equivalent to 35W dichroic

11W total power consumption

Fixed or gimbal fixture options

Product Features

8W LED Downlights

Clipsal's range of LED downlights is expanding, with the introduction of a new 8W LED downlight that perfectly complements the popular 12W model. This new 8W downlight uses less power, however, Clipsal has been careful to ensure it has maintained all the quality and features you have come to expect.

The revolutionary aluminium heat sink design, along with onboard thermal dimming, remains so that Clipsal can continue to offer long life and safety protection. Through extensive testing and tuning, the 8W downlight works perfectly with Universal and C-Bus dimming technology.

As LED technology continues to be developed, Clipsal continues to be committed to providing you with the latest products that support your future needs.

Smarter LED downlights for optimal performance

L955C/8WHL955WF/8BC

With Clipsal's commitment to bring its customers energy-efficient and intelligent lighting solutions, it has taken the opportunity to phase out all our magnetic batten and T-bar products. The NEL Series of battens and T-bars now mean Clipsal's base offer is not only constructed with quality materials, but supplied with highly efficient electronic ballasts.

This is one of many initiatives Clipsal is making to ensure its products are sustainable for the future

Electronic Battens and T-bar

Bodies formed in white powder coated steel

Polycarbonate end caps and lamp holders

Weatherproof versions formed in polycarbonate base and diffuser

Electronic ballast

Colour 840 lamps included

DALI control options available

Product Features

A reliable, energy-efficient lighting solution

Catalogue Numbers

BB118NEL

BB218NEL

BB136NEL

BB236NEL

DB118NEL

DB218NEL

DB136NEL

DB236NEL

WP118NEL

WP218NEL

WP136NEL

WP236NEL

TB236NEL

WP236NEL

DB136NEL

10

DALIinfinity™ Soft Wiring 5 Pole

One of the most internationally recognised lighting protocols by manufacturers and authorities is the DALI (Digital Addressable Lighting Interface) international open lighting control protocol.

A DALIinfinity Soft Wiring 5 Pole system offers an efficient method of connectivity and installation of light fittings.

In the past, installers would normally install these light fittings with normal fixed 3 core double-insulated TPS cable for power, plus another 2 core mains rated cable for interface control. Now, with the DALIinfinity Soft Wiring 5 Pole system it’s not necessary, due to its Plug and Play feature.

Compatibility

Clipsal DALIinfinity is generally compatible with most Clipsal DALI products, as provided by Clipsal Integrated Systems and Clipsal Lighting.

DALIinfinity is compatible with many other manufacturers of DALI equipment and lighting products.

Catalogue Numbers

DI-DF-20 DALI Fly Lead Male Free End 2.0M 16A DALI Cables Only (2 x 1.5mm²)

DI-DL10 DALI Fly Lead Male Free End 1.0M 16A (5 x 1.5mm²)

DI-DL20 DALI Fly Lead Male Free End 2.0M 16A (5 x 1.5mm²)

DI-SI10 Interconnect Lead 5 Pole 1.0M 20A (3 X 2.5mm²) & (2 x 1.5mm²)

DI-SI20 Interconnect Lead 5 Pole 2.0M 20A (3 x 2.5mm²) & (2 x 1.5mm²)









DI-T 5 Pole T Connector

DI-H 5 Pole H Connector

DI-MA Snap-In Panel-Mount Connector Male 5 Pole

DI-FE Snap-In Panel-Mount Connector Female 5 Pole

DI-RW-FE Rewirable Socket Female 5 Pole

DI-RW-MA Rewirable Plug Male 5 Pole

DI-LD Locking Device

DI-SS Starter Socket

Unrivalled. Scalable. Flexible.

Product Features

One socket solution for installation

Easy to install (Plug and Play)

Unique keyway sockets indicating DALI circuits

Easy disconnection and re-connection of luminaires for relocation and maintenance

Easy installation of luminaires, emergency fittings and exit signs on one system

Wider range of accessories to suit every application

Cost-effective due to removable and reusable cabling and connectors. Ideal for expanding installations

DI-DL20 DI-T DI-DF-20

11

Cat. 6A Shielded Solution

With new technology constantly being introduced to the market, there is a need for reliable network cabling solutions to support such technology. So, Clipsal has released its 10 Gigabit Cat. 6A Shielded Solution.

The Clipsal solution uses a F/UTP constructed cable providing full immunity against any external noise interference. With a LSZH sheath as standard, it provides an environmentally friendly aspect to the offer.

The fully-shielded 30 Mech Cat. 6A Connector is the only one available on the market with a 30 Mech fascia, which allows for full adaptation into any Clipsal 30 Series Plates.

The straight patch panel gives all the same features and benefits that our customers have come to know with Earth bonding facilities. It comes with 24 keystone shielded connectors in the box.

The F/UTP patch cords have the snagless boot and also come with the LSZH sheath as standard, adding to the environmentally friendly nature of the solution.

Catalogue Numbers

2D4P6AILSF3B-BU Cat. 6A F/UTP LSZH LAN Cable

30RJ45SM6AF Cat. 6A Shielded Jack 30 Mech

RJ45SM6AF Cat. 6A Shielded Jack Keystone

RJ6AF/24PP 24-Port Cat. 6A Shielded Patch Panel Straight

RJ6AF8A10LPL-BU Cat. 6A F/UTP LSZH Patch Cord 1m




Cat. 6A F/UTP Cable Features

F/UTP cable, LSZH sheath

Full AXT immunity

23AWG, 305m reel

Supporting 10Gbs transmission

The high performance data solution

RJ6AF/24PP

Cat. 6A Shielded Connectors Features

Toolless termination

30 Mech aperture to suit Clipsal wall plates

Flexible locking tabs

Fully shielded for AXT immunity

Cat. 6A Patch Panels Features

Nickel-plated and powder- coated frames

Earthing point

Flexible labelling system

All mounting hardware supplied

Cat. 6A F/UTP Patch Cords Features

F/UTP stranded cable, LSZH sheath

Snagless boot

Backward compatible to Cat. 5E & Cat. 6

Supporting 10Gbs transmission

30RJ45SSM6AF RJ6AF8A30PL-BU

12

StarServe Data Home Distribution Unit

Adding to the current range of StarServe Enclosures is Clipsal's locally designed, moulded plastic enclosure. It has been specifically designed for National Broadband Network (NBN) equipment and your home networking equipment, all within the one enclosure.

Having all equipment housed within the one enclosure provides a convenient location to centralise your home networking solution.

Product Specifications

Dimensions – 750mm (h) x 405mm (w) x 150mm (d) Cut-out dimensions – 760mm (h) x 415mm (w)

Centralised and simple

Catalogue Numbers

3105PEN7440 ABS Enclosure Home Distribution Unit

Product Features

Made from moulded plastic (White Electric colour)

Wi-Fi network compatible

Multi-use flexibility - gear tray is supplied unpopulated (except for small StarServe rack) to allow installers to install whatever product they require

Designed to house NBN equipment and additional networking products, such as StarServe data and phone patch panels

Two key locks on door for limiting access, uses matching key (CL001)

Suitable for surface or semi-flush mounting

Flush mounting flange supplied as standard

Removable hinged door with captive door hinges

Vented door (top and bottom)

Removable, moulded plastic, full length gear tray with moulded grid lines

Cut-out provisions on top and bottom of enclosure for mounting a GPO

Zoned areas on rear of the gear tray using removable plastic segregation channels, one at top, one at bottom of enclosure

Pre-cut hole section on rear gear tray to allow for coax cables to connect to MATV equipment

Redesigned StarServe mounting rack included

Pre-drilled holes in sides of enclosure to aid in fixing into wall

Rear of enclosure body populated with 20mm and 25mm knockouts to allow for easy cable entry

Gear tray made of plastic

Four additional mounting turrets on rear of enclosure for gear tray mounting

Parts pack including blanking plugs for mounting screws and two keys for door locks

Customer Benefits

Constructed from plastic ensuring that it is Wi-Fi network friendly

Moulded plastic; enclosure is non-conductive and does not require Earthing. If power outlets (GPOs) are installed - they will still require Earthing as per Australian Standards

White Electric colour ensures product will blend in with other electrical accessories

Enough space to fit all NBN product plus additional equipment

Only one enclosure required for all installations, surface or flush mount

Pre-drilled holes in sides of enclosure to aid in mounting

Rear of enclosure body populated with 20mm and 25mm knockouts to allow for easy cable entry

3105PEN7440

All equipment in picture is for illustration purposes only and not supplied with the enclosure.

13

Catalogue Numbers

110PDT 110 Punchdown Tool

Adding to the current range of terminating tools for the Datacomms range of connectors, Clipsal has released a new 110 Punchdown Tool. 110PDT has all the necessary features and benefits that is required by the installer to perform the task at hand.

Indented sides for finger comfort

Reversable blade for cutting and non-cutting

Hi-Lo impact options

Extra blade housing facility

Bladelocking system compatible with Clipsal’s spare 110 Blade (TRJ45PDTB)

Product Features

110 Punchdown Tool

Slim design for installer comfort

Clean cutting blade

Replaceable blade

Durable construction

“CUT” indicated clearly to indentify cutting side of blade

Customer Benefits

Catalogue Numbers

2T4CIRW5 Core Jumper Wire Red/White 400m Reel

2T4CIGW5 Core Jumper Wire Green/White 400m Reel

Catalogue Numbers

3105RG6CC10 RG6 Compression Connector 10Pk

3105RG6CC50 RG6 Compression Connector 50Pk

3105RG11CC RG11 Compression Connector 2Pk

2-Core Jumper Wire Clipsal has changed the metre roll length of its two lines of Jumper Wire, due to customer demand in a progressive market. The red/white and green/white jumper wire is now supplied in 400m reels. The product specifications and price (per metre) have not changed.

To enhance its existing FOXTEL product offer, Clipsal has released FOXTEL approved compression connectors and compression tools. These termination products, when used with our FOXTEL Approved Coaxial Cables, (3105RG6Q3B and 3105RG11Q3R) will allow you to supply and terminate compliant cabling for FOXTEL commercial installations.

Compression connectors

• RG6 connectors are available in either installer sized packs or a smaller pack for domestic installers. The 3105RG6CC10 pack includes 10 connectors, whereas the 3105RG6CC50 pack includes 50 connectors.

• RG11 connectors are also available for commercial installation fit-offs. The 3105RG11CC pack includes two connectors.

Compression tools

Clipsal offers two styles of compression tool, one for economy and one for professional use.

• The Economy Compression Tool 3105RG6CCT for domestic FOXTEL installers using RG6 cable, is suitable for use with 3105RG6CC10 and 3105RG6CC50.

• The Professional Compression Tool 3105RG6/11CCT is suitable for commercial installers using RG6 and RG11 cables, and can be used with 3105RG6CC10, 3105RG6CC50 and 3105RG11CC.

Foxtel™ Connectors & Tools

110PDT

2T4CIRW5

3105RG6CC103105RG11CC

3105RG6CCT Economy Compression Tool

3105RG6/11CCT Professional Compression Tool

3105RG6/11CCT

3105RG6CCT

14

Catalogue Numbers

5754ODPEIR C-Bus Surface-Mount 360° PIR Occupancy Detector and Light Level Detector, with IR receiver

5754ODPE C-Bus Surface-Mount 360° PIR Occupancy Detector and Light Level Detector

5754PE C-Bus Surface-Mount Light Level Detector

5754ODPEIR

C-Bus® 30 Series Mechanism SpacerExciting new optionsThe C-Bus 30 Series Mechanism Spacer provides the ability to install C-Bus 30M Switches into Saturn 4000 (250V) Series Grid Plates and Covers.

The C-Bus 30 Mechanism Master and Slave Switches are mated quickly with Saturn Grid Plates using this self-adhesive, round polyurethane spacer, resulting in seamless button operation.

This opens up exciting new options for C-Bus wall switches, such as 1-button Saturn Wall Switches and Saturn Architrave Wall Switches.

Catalogue Numbers

5031NMSPACER C-Bus 30 Series Mechanism Spacer (pack of 60)

Product Features

Clear, round polyurethane self-adhesive spacers

Supplied in a bag of 60 pieces

Achieve C-Bus 1-button Saturn Wall Switches

Achieve C-Bus 1 and 2-button Saturn Architrave Wall Switches

5031NMSPACER

C-Bus® Surface-Mount 360º Detectors

The new C-Bus Surface-Mount 360º Detectors provide an immediate solution for the installation of C-Bus Detectors onto solid surfaces, such as masonry or wood. The new products are based on existing C-Bus Detection Technology and enclosure design.

The three new products include:

• C-Bus 360° Detector with occupancy, light level and infrared control functionality

• C-Bus 360° Detector with occupancy and light level functionality

• C-Bus Light Level Detector.

All variants are effectively based on the current flush-mount C-Bus Multi-Sensor, resulting in a number of new features in the occupancy and light level detectors.

New to all C-Bus Surface-Mount 360º Detectors are configurable set points that can be controlled by C-Bus to adjust system behaviour parameters such as light level target and light level margin.

New mounting solution to suit surface mount applications

Low profile surface-mount design

Uses passive infrared (PIR) detection with manually adjustable sensitivity to motion

Software programmable time delay

Motion detection coverage typically 7.6m diameter (at 2.7m mounting height)

C-Bus control of light level target, light level margin, high/low lux levels and high/low thresholds

Bank switching of lighting levels based upon the light level set-point

Daylight harvesting to maintain a constant user-configured light level

Streamlined product platform

Product Features

A new mounting solution

15

Catalogue Numbers

5500CN2 C-Bus Network Interface Version 2

C-Bus® Network Interface V2

Product Features

New Ethernet interface

Configure IP address using the C-Bus IP Utility software

Provides an isolated communication path between a C-Bus and an Ethernet network

DIN rail mounted, 4M wide

Powered from supply voltage of 6-12V d.c.

Includes 9V d.c. plug pack

The C-Bus Network Interface has been updated to a new version 2 product. The new version 2 is effectively a DIN rail format of the in-line C-Bus Network Interface supplied with the Wiser™ Home Controller.

The functionality of the new version 2 C-Bus Network Interface has not changed and the platform is now common across both the DIN rail format and in-line format. The new version 2 is now configured using the C-Bus IP Utility and is powered by a 6-12V d.c. plug pack.

Can act as a programming interface into C-Bus

Create multi-network installations based on an Ethernet backbone

Monitor and log data using the appropriate software

Provide C-Bus device control via automation software such as Schedule Plus or HomeGate

5500CN2

L5112D20LPR12C L5106D20UAR6C

Product update

Catalogue Numbers

L5112D20LPR12C C-Bus Professional Dimmer, chassis only, 12-channel, 20A per channel, 12 RCDs onboard




L5112D10UAR12C C-Bus Architectural Dimmer, chassis only, 12-channel, 10A per channel, 12 RCDs onboard



C-Bus® Architectural and Professional Dimmers (Chassis Only)

C-Bus Architectural and Professional Dimmers are high-powered, multi-channel dimmers, and due to their modular design can provide total flexibility for product variants or configurations.

The new chassis only offer excludes dimmer channel cards and comprises:• C-Bus Architectural and Professional Dimmers• 6 and 12-channel models• 10 amp and 20 amp MCB models• onboard RCBO per channel.

The range is designed for commercial applications such as pubs, clubs, restaurants, entertainment venues, hotel ballrooms and convention centres.

These multi-phase control units are compatible with a wide range of load types, including incandescent and halogen lamps, transformer-based low voltage lamps and neon tube lighting. The compatible dimmer channel cards provide solutions for universal dimming, leading-edge dimming, trailing-edge dimming and ballast control. It’s simply a matter of installing the required channel cards to suit the customer's exact needs, reducing costs and saving time.

Complete dimmer chassis offer excluding channel cards

6 and 12-channel models

10 amp and 20 amp MCB models

Onboard RCBO per channel (accommodates the full RCD requirements of AS/NZS3000:2007)

Architectural range provides C-Bus or DMX512 operation modes

Install chassis during specification/construction stage and determine channel cards later

Populate channels as required

Modular solution increases flexibility to suit custom installations and changing customer needs

Product Features

The configurable solution

16

C-Bus® Toolkit Software Enhancements

C-Bus Toolkit is a PC-based network configuration and solution programming utility. It allows installers to program, commission and manage C-Bus installations.

The latest upgrades of C-Bus Toolkit will allow installers to start working sooner, with improved productivity and a reduction in overall programming time.

A large number of new features form part of the new Toolkit Software (V1.12.0 onwards).

C-Bus® Wireless Battery Operated Wall Switches

The C-Bus Wireless Battery Operated (Freelocate) Wall Switches are native C-Bus Wireless devices. Identical in operation to the C-Bus Wireless Remote Control, Freelocate wall switches are radio frequency (RF) control devices that are able to control loads on C-Bus Wireless devices or loads on a wired C-Bus network.

Freelocate wall switches provide the upmost flexibility providing control of C-Bus loads and devices from places where wiring cannot be run or in some cases, doesn't need to be run.

A mounting plate is supplied with the Freelocate wall switches, which contain standard 84mm mounting centres. Once installed, this allows a C-Bus Wireless Wall Switch to be removed from the mounting plate and used as a handheld remote control, if desired.

The C-Bus Wireless Battery Operated (Freelocate) Wall Switches include two versions; a two-button and a six-button. The six-button version contains five control buttons and one "All Off" button. The "All Off" button will turn off the loads or devices associated with the five control buttons. The six-button Freelocate wall switch also contains a window to suit a slide-in printable label. This backlit window along with button labels, make identifying control buttons quick and easy.

The two-button and six-button Freelocate wall switches are available in the Saturn range only - in Pure White, Ocean Mist and Espresso Black finishes.

Product Features

Battery operated wall switch

Two-button and six-button (five control + one "All Off")

Six-button contains a backlit window to suit slide-in printable label

Available in Pure White, Ocean Mist and Espresso Black

Supplied with mounting plate (with standard 84mm centres)

User replaceable lithium batteries (CR2025 x 2)

Battery life (typical): o two-button (three years) o six-button (two years).

Low battery LED indication

Seamless control of devices, loads and functions on a C-Bus Wireless or C-Bus wired network

C-Bus control from places where wiring cannot or need not be run

Can be used as a C-Bus RF Remote

Catalogue Number

5882TXWMBA-PW 2-button, Saturn style, Pure White

5882TXWMBA-OM 2-button, Saturn style, Ocean Mist

5882TXWMBA-EB 2-button, Saturn style, Espresso Black

5886TXWMBA-PW 6-button (5 control + 1 "All Off"), Saturn style, Pure White

5886TXWMBA-OM 6-button (5 control + 1 "All Off"), Saturn style, Ocean Mist

5886TXWMBA-EB 6-button (5 control + 1 "All Off"), Saturn style, Espresso Black

5886TXWMBA-PW

C-Bus Toolkit Software

Easily extend any C-Bus installation

Start working sooner

Product Features

Background network scan

Duplicate detection

Refresh network

Unravel improvements

Applications panel

Copy and paste

Unit templates

Smarter shutdown

Concurrent use of Clipsal software applications

C-Gate service

C-Gate configuration options.

17

C-Bus® Occupancy Controllers

The C-Bus Occupancy Controller provides control of lighting based on the occupancy status of the zone or room being controlled. The C-Bus Occupancy Controller is suitable for many lighting control applications, with a particular focus on satisfying the need for minimum lighting control requirements in commercial lighting applications. Controlled areas can include meeting rooms, stairwells, open-plan office environments, car parks and washrooms.

The C-Bus Occupancy Controller is available in one or two-zone models, which incorporate a 16A relay output per zone for lighting loads. A third model provides two zones of relay switching plus two additional dimmer outputs for control of DSI, DALI or 0-10V ballasts.

The occupancy controller provides input control from detectors, auxiliary (mechanical) switches, remote override switches or C-Bus devices. Timers can be set on either the detector, the controller or for more complex timing options, within C-Bus (Toolkit).

Also included within the offer is a range of wall and ceiling-mount motion detectors based on PIR, ultrasonic and dual PIR/ultrasonic sensing technologies. The occupancy controller provides power to the detectors connected to it (up to three per zone). The input switch can use all standard toggle and bell-press Clipsal wall switch types for manual control.

The C-Bus Occupancy Controller operates with or without connection to a C-Bus network. Incorporating an area managed by a C-Bus Occupancy Controller into a larger control system at a later stage, is as simple as connecting it to C-Bus. Stand-alone versions of the occupancy controllers are also available, which do not have the ability to connect to C-Bus.

Product Features

One and two zone models with 16A relay output per zone

Two zone model with 16A relay output per zone, plus ballast control output per zone

Selectable ballast control output - DSI, DALI (broadcast) or 0-10V analogue signals

Detector inputs

Auxiliary/switch inputs

Onboard timers and relay fail-safe mode

Remote override on/off capability

Direct connection of detectors (up to three per zone)

Power for detectors supplied by the controller

Wide range of wall and ceiling-mount detectors

Easy to install

Works out of the box

Self contained (cable directly to unit)

Quick, easy and cost-effective

Highly flexible C-Bus programming

Can be upscaled (future-proof)

Catalogue Number

5752PP/1RC-Bus Occupancy Controller, 1 zone, 1 relay output

5752PP/2RC-Bus Occupancy Controller, 2 zones, 2 relay outputs

5752PP/2R/2DC-Bus Occupancy Controller, 2 zones, 2 relay outputs plus 2 ballast control (dimmer) outputs

752PP/1RStandalone Occupancy Controller, 1 zone, 1 relay output

752PP/2RStandalone Occupancy Controller, 2 zones, 2 relay outputs

752/CPCeiling-Mount PIR Detector, 360°

752/CUCeiling-Mount Ultrasonic Detector, 360°

752/CDCeiling-Mount Dual-Technology (PIR and Ultrasonic) Detector, 360°

752/CU180Ceiling-Mount Ultrasonic Detector, 180°

752/CD180Ceiling-Mount Dual-Technology (PIR and Ultrasonic) Detector, 180°

752/WPWall-Mount PIR Detector, 110°

752/WUWall-Mount Ultrasonic Detector

752/WDWall-Mount Dual-Technology (PIR and Ultrasonic) Detector, 110°

A cost-effective sensor control solution

5752PP/1R

752/CD 752/CD180 752/WD

18

Xantrex™ GT Series System Control Panel

This GT System Control Panel is a remote device that connects to the GT Inverter, via a Cat. 5 data cable and allows the inverter's operating parameters to be displayed inside the home. The GT System Control Panel is powered off the GT Inverter, via the Cat. 5 cable and no external power supply is required. The GT System Control Panel features an easy to read screen, and large buttons for menu navigation.

The GT System Control Panel can be used to monitor a single or multiple GT Inverters where the accumulated data is shown on the display.

Get connected with Xantrex Grid-Tie Inverters

Catalogue Numbers

864-0203 Xantrex GT System Control Panel

Product Features

Connects to GT range of inverters

Central time controller for the solar system

LCD display shows status at a glance

Audible alarm for fault condition

Indoor use only

Conext TL Three Phase Grid-Tie Inverters

The new Conext TL 15kW and 20kW Grid-Tie Solar Inverters are suited for outdoor use and are the ideal solution for small commercial building rooftops and other similar applications. The inverters provide a wide Maximum Point Power Tracking (MPPT) voltage range, an EU efficiency of 97.3%, fast ROI and high availability. Backed by Schneider Electric’s global service, the Conext TL Series are inverters you can rely on, from a company you can count on.

You can rely on Conext TL Grid-Tie Inverters

Catalogue Numbers

PVSNVC15000 15kW Three Phase Grid-Tie Inverter

PVSNVC20000 20kW Three Phase Grid-Tie Inverter

Product Features

A smart solution, which is easy to install and maintain

Transformerless design with high peak and EU efficiency

Dual independent MPPT trackers with wide voltage range

LCD display provides instantaneous information including power level and daily energy

Modbus communication protocol seamlessly integrates the inverter with other Schneider Electric equipment

864-0203

PVSNVC15000

19

Conext XW Series Hybrid Inverter/Chargers

Adaptable and scalable, the Conext XW system is the one solution for grid interactive and off-grid, residential and commercial, solar and backup power applications. Utility connected users will appreciate the flexibility of being able to generate power from solar modules and provide that power back to the utility, or simply store power and act as a backup power system when the grid fails. Unlike a UPS, the Conext XW is integrated into the home’s electrical system and seamlessly transfers power from battery reserves to critical loads in the event of a power outage or brown-out.

Adaptable and scalable

Catalogue Numbers

865-1035-61 XW6048-230-50 6kW Conext XW Inverter/Charger

865-1040-61 XW4548-230-50 4.5kW Conext XW Inverter/Charger

865-1045-61 XW4024-230-50 4.0kW Conext XW Inverter/Charger

Product Features

Scalable power (4.0kW/4.5kW/6.0kW)

Multiple units can be installed in clusters with up to 24kW in single phase

Full grid-tie functionality and integration with MPPT Solar Charger Controllers

Integrates and manages hybrid power options with dual a.c. inputs

Full control of generator with optional Automatic Generator Start module (AGS)

True sine wave output and high surge capacity to start difficult loads

Conext XW Series Solar Charge Controllers

The XW Series of Solar Charge Controllers track the maximum power point of a photovoltaic (PV) array to deliver the maximum available current for charging batteries. When charging, the MPPT units regulate battery voltage and output current based on the amount of energy available from the PV array and state-of-charge of the battery.

The MPPT 60 150 supports PV arrays with open-circuit voltage of up to 150V with a maximum charge current of 60A into 12, 24, 36, 48 or 60V d.c. battery systems. The MPPT 80 600 supports PV arrays with open circuit voltage of up to 600V with a maximum charge current of 80A into 24V and 48V d.c. battery systems.

For improved battery life

Catalogue Numbers

865-1030-1 XW MPPT 60-150 Solar Charge Controller

865-1032 XW MPPT 80-600 Solar Charge Controller

Product Features

Maximise PV array performance with Fast Sweep™ Maximum Power Point Tracking (MPPT) algorithm

Compatible with all PV cell types

Improve battery life with selectable two or three-stage charging algorithms

Compatible with FLA, AGM, or Gel battery systems

865-1032 865-1030-1

865-1035-61

20

865-1060

865-1050

Conext XW Series System Control Panel

Conext XW Series Auto Generator Start

The XW Series System Control Panel (SCP) is used to program and interface with the XW Series of Inverter/Charger and Solar Charge Controllers. The SCP features a graphical, backlit LCD display that provides system configuration and diagnostic information for devices connected to the Xanbus-enabled network. Navigation between the programming menus is via the tactile push-buttons located on the unit. The System Control Panel is physically the same as the GT System Control Panel, but that is where the similarities stop. They feature different firmware and are not interchangeable.

The Conext XW Series Auto Generator Start (AGS) will automatically activate a generator to provide a Conext XW Inverter/Charger with power to recharge a depleted battery bank or provide additional power for heavy loads. The AGS adds intelligence to generator management, thereby eliminating time spent monitoring batteries and inverter loads. It does this by continuously monitoring the battery voltage, state-of-charge, or the inverter charge mode; starting and stopping the generator when the battery needs additional charging. The AGS will also start the generator to assist the system’s XW Inverter/Charger(s) when output power demands are high.

For devices connected to the Xanbus-enabled network

Intelligence for generator management

Catalogue Numbers

865-1050 XW Series System Control Panel

Catalogue Numbers

865-1060 XW Series Auto Generator Start

Product Features

Connects to XW Series of Inverters, Chargers or Solar Charge Controllers

Central time controller for the solar system

LCD display shows status at a glance

Audible alarm for fault condition

Indoor use only

Product Features

The Auto Generator Start connects to Xanbus-enabled XW systems

Works with a.c. or d.c. generators, with 2-wire or 3-wire start controls

Preserves AGS settings even if the network power is removed

21

865-1025

130-0004-03-01

Conext XW Series Accessories

The Conext XW Series Conduit Box (CB) and the Battery Temperature Sensor (BTS) are designed for use with the XW Series. The CB can be used to create systems larger than two inverters, or to retrofit Conext XW Inverters/Chargers into existing systems. The BTS mounts on the battery to measure the temperature and is used by the Conext XW Inverter/Charger and the Solar Charge Controller. The BTS is supplied with a lead length of 10.7m (35ft).

For flexibility and reliability

Catalogue Numbers

865-1025 XW CB Conduit Box

130-0004-03-01 XW Battery Temperature Sensor

Product Features

Conduit Box Dimensions 229mm x 406mm x 210mm

Conduit Box Weight 4.6kg

BTS Cable Length 10.7m (35ft)

22

56 Series™ Deep Base/Cover Switch (56SWH) range redesign

The well known and accepted Kraus & Naimer Load Break Switch is now standard within the Clipsal 56 Series (56SWH) range. Along with increased cabling room, the 56SWH Series Switch also provides improved AC23 motor ratings.

Available in both three and four-pole arrangements, and amperages of 25A, 40A, 63A and 80A (three-pole only), the 56SWH is ideal for industrial switching applications.

Increased cabling room to assist with easier cable management

K&N, KF and CA base-mounted switch mechanisms provides easy access to terminals

Improved AC23 motor ratings

Colours of Grey (GY) for traditional installations and Resistant Orange (RO) for chemical resistance

Red/yellow switch for easy identification

Enclosed in two-gang, 56 Series Deep Switch Cover

Product Features

For increased cabling room

56SWH463

Catalogue Numbers

56SWH325 Triple-pole 25A, AC23



56SW380 Triple-pole 80A, AC23

56SWH425 Four-pole 25A, AC23



23

Introduction of MACTRO technology cable seal system

Wider lock-ring is easier to unscrew from sockets (ideal while wearing protective gloves)

Small and large cable glands provided to suit a wide range of cable dimensions

Clean design with less grooves to minimise dirt build-up

Product Features Catalogue Numbers

56P332, 56P432 and 56P532 Straight Plugs, 32A

56P440 and 56P540 Straight Plugs, 40A

56P450 and 56P550 Straight Plugs, 50A

56PA332, 56PA432 and 56PA532 Angled Plugs, 32A

56PA440 and 56PA540 Angled Plugs, 40A

56PA450 and 56PA550 Angled Plugs, 50A

56CSC332, 56CSC432 and 56CSC532 Socket Connectors, 32A

56CSC440 and 56CSC540 Socket Connectors, 40A

56CSC450 and 56CSC550 Socket Connectors, 50A

56PO432 and 56PO532 Pendant Outlets



Accessories Catalogue Numbers

56SHL Suspension Hooks

56PCI Protective Cap (to prevent dirt and water accessing plug pins)

56AM40 Adaptor Module (suitable for adaption of flexible conduit, glands or hose adaptors)

56 Series™ Plug and Socket Connector Upgrade

As part of the ongoing product improvement process, Clipsal is proud to announce the arrival of the redesigned 56 Series Three Phase 32A to 50A Plugs and Socket Connectors.

Product part numbers will not alter as part of this transformation and all existing colours, Electric Orange (EO), Resistant Orange (RO) and Grey (GY) will be included.

New products can be identified by the MACTRO logo, which appears on all related product packaging.

For reliable performance under tough conditions

For more information on the entire 56 Series Plug and Socket Connector range, please contact your Clipsal sales office for a copy of the technical brochure.

56SHL 56PCI 56AM40

Coinciding with the release of the new 56 Series product range, will be the release of the following 56 Series Plug Accessories.

Conext TL Three Phase Grid-Tie Inverters

Page 18

56 Series Plug & Socket Connector Upgrade

Page 23

DALIinfinity Soft Wiring 5 Pole

Page 10

Electronic Battens and T-Bar

Page 9

Conext XW Series Hybrid Inverter /

Chargers Page 19

Xantrex GT Series System Control Panel

Page 18

56 Series Deep Base/Cover Switch

Range Redesign Page 22

C-Bus® Wireless Battery Operated

Wall Switches Page 16

C-Bus® Toolkit Software Page 16

Conext XW Series Auto

Generator Start Page 20

Conext XW Series Solar Charge Controllers Page 19

Conext XW Series System Control

Panel Page 20

2-Core Jumper Wire Page 13

Foxtel Connectors & Tools

Page 13

110 Punchdown Tool Page 13

C-Bus® Occupancy Controllers Page 17

Conext XW Series Accessories Page 21

C-Bus® Surface-Mount 360º Detectors

Page 14

C-Bus® 30 Mechanism Spacer

Page 14

C-Bus® Architectural and Professional Dimmers

Page 15

C-Bus® Network Interface V2 Page 15

O.Erre Industrial Fans Page 7

8W LED Downlights Page 9

Weatherproof Sunset Switches

Page 5

Ecomind Electricity Monitor

Page 5

Push-Button and Rotary Controlled Dimmer

Page 6

Impress Page 4

Strato 8000 Series

Page 3

Modena 8000 Series

Page 3

StarServe Data Home Distribution Unit

Page 12

Cat. 6A Shielded Solution Page 11

415VF Caravan Socket Outlet

Page 4

Slimline Xtra Switch Page 7

NEW PRODUCTS AT A GLANCE

© 2012 Schneider Electric. All Rights Reserved.

Trademarks are owned by Schneider Electric Industries SAS or its affiliated companies.

Schneider Electric (Australia) Pty Ltd

33-37 Port Wakefield Road, Gepps Cross South Australia 5094

PO Box 132, Enfield Plaza, South Australia 5085

National Customer Care Enquiries: 1300 2025 25

O/N 25324CLIPCOM25324 November 2012

Website: clipsal.com Contact us: clipsal.com/feedback

You can find this brochure and many others online in PDF format at: clipsal.comFollow the links off the home page or access the following page directly: clipsal.com/brochures

C4-

016

Schneider Electric (Australia) Pty Ltd reserves the right to change specifications, modify designs and discontinue items without incurring obligation and whilst every effort is made to ensure that descriptions, specifications and other information in this catalogue are correct, no warranty is given in respect thereof and the company shall not be liable for any error therein.

This document has been printed using FSC Mix Certified paper. ISO 14001 environmental management system in use at mill.

Deep Plastic Wall Box Page 8

new product bulletin - clipsalupdates.clipsal.com/clipsalonline/files/brochures/g0000122.pdf ·...

Documents