new lifting solution - university of alberta...mini yoke flyer 6 author agata konopka created date...

1
The Yoke for I-Joists and SIP Panels www.myticon.com | [email protected] | 1.866.899.4090 *Final capacities and lifting scenarios must be confirmed in the new Rigging Design Guide coming Fall 2019 The Yoke Designed for I-Joists and Structural Insulated Panels Cost Effective Fast Installation Capacity of up to 2000lbs* Tested for Canada & USA Yoke test on I-joist floor provided by ARTS group at the University of Alberta Yoke test on structural insulated panel (SIP) provided by ARTS group at the University of Alberta New Lifting Solution The Mini Yoke uses code approved ASSY self-tapping screws. These high strength fasteners allow for fast installation and eliminate the need for pre-drilling holes prior to the installation. This fast installation also allows for efficient truckload sequencing, minimizing onsite delays. The Mini Yoke is a brand new rigging system unique to MyTiCon Timber Connectors. It is engineered and tested to lift lighter panels. Full design values will be available in our new Rigging Design Guide coming in Fall 2019.

Upload: others

Post on 01-Aug-2020

2 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: New Lifting Solution - University of Alberta...Mini Yoke Flyer 6 Author Agata Konopka Created Date 5/23/2019 4:33:10 PM

The Yoke for I-Joists and SIP Panels

www.myticon.com | [email protected] | 1.866.899.4090*Final capacities and lifting scenarios must be confirmed in the new Rigging

Design Guide coming Fall 2019

The Yoke Designed for I-Joists and Structural Insulated Panels

Cost Effective

Fast Installation

Capacity of up to 2000lbs*

Tested for Canada & USA

Yoke test on I-joist floor provided by ARTS group at the University of Alberta

Yoke test on structural insulated panel (SIP) provided by ARTS group at the University of Alberta

New Lifting Solution

The Mini Yoke uses code approved ASSY self-tapping screws. These high strength fasteners allow for fast installation and eliminate the need for pre-drilling holes prior to the installation. This fast installation also allows for efficient truckload sequencing, minimizing onsite delays.

The Mini Yoke is a brand new rigging system unique to MyTiCon Timber Connectors. It is engineered and tested to lift lighter panels.

Full design values will be available in our new Rigging Design Guide coming in Fall 2019.