new length 6.5 mm and platform diameter 6.0 mm spi ... rc 6...spi ®direct), on the impression items...
TRANSCRIPT
SWISS PRECISION AND INNOVATION. SWISS PRECISION AND INNOVATION.
New length 6.5 mm and platform diameter 6.0 mm SPI®ELEMENT implantsSurgery and prosthetics
Notes
EXPLANATION OF SYMBOLS
Batch code
Use by
Sterilized using irradiation
Do not reuse
Non-sterile
Caution, consult accompanying
documents
Article number
Conformity symbol as specified
by EU Directive MDD 93/42/EEC
Consult instructions for use
COLOR CODE Each implant platform diam-
eter has a color code, which can be found
on all implant packs (with the exception of
SPI®DIRECT), on the impression items and
on most diameter-specific instruments.
Yellow = platform B 3.5 mm
Green = platform B 4.0 mm
Blue = platform B 4.5 mm
Grey = platform B 5.0 mm
Violet = platform B 6.0 mm
RESPONSIBILITY/LIABILITY As part of an overall scheme, Thommen
implants may be used only with the ori ginal components and
instruments in accordance with the manufacturer’s instructions.
The use of unapproved components from other systems can cause
malfunctioning of the implants and abutments and lead to implant
failure. The use of the product is the responsibility of the user and,
as such, beyond the control of Thommen Medical AG. We refuse to
accept any responsibility or liability for any damage due to incorrect
utilization of the product.
GuARANTEE OF STERILITY OF STERILE PRODuCTS Products
of the Thommen Implant System supplied in sterile packaging must
not be resterilized. If the sterile packaging is damaged during trans-
port or storage, the product must not be used. Products that have
been opened and have not been immediately used for the intended
operation must not be used thereafter. After resterilization, the
safety, function and efficacy of the product cannot be guaranteed
by the manufacturer.
STORAGE Plastic parts must be stored at room temperature and
protected from exposure to strong light or high heat.
INSTRuCTIONS FOR uSE The following information is not in-
tended as comprehensive for the Thommen Implant System. New
customers are advised to undergo training by a specialist experi-
enced in the use of this system.
VALIDITY This product catalogue replaces all previous editions.
PRODuCT DOCuMENTATION You can find detailed information
on the handling of Thommen implants in our brochures. Ask our
national representatives for product brochures and instructions for
use.
AVAILABILITY NOTE Not all products shown in this brochure are
available in all countries. For further information please contact our
subsidiary or distributor in your country.
COPYRIGhT©/REGISTERED® SPI®, INICELL® and APLIQUIQ® are
registered trademarks of Thommen Medical AG. Publication or re-
production is permitted only with the written consent of Thommen
Medical AG.
COLORED WARNING STICKER
Application was changed – follow the instructions in the corre-
sponding documentation.
New design – the application has not been changed.
Nonsterile
Consult instruction
for use
Caution
Do notreuse
1250
Nonsterile
Consult instruction
for use
Caution
Do notreuse
1250
Nonsterile
Consult instruction
for use
Caution
Do notreuse
1250
Nonsterile
Consult instruction
for use
Caution
Do notreuse
1250
Nonsterile
Consult instruction
for use
Caution
Do notreuse
1250Non
sterile
Consult instruction
for use
Caution
Do notreuse
1250Non
sterile
Consult instruction
for use
Caution
Do notreuse
1250
Nonsterile
Consult instruction
for use
Caution
Do notreuse
1250Nonsterile
Consult instruction
for use
Caution
Do notreuse
1250
© Thommen Medical 3
Contents
L 6.5 mm/PF B 6.0 mm ELEMENT implants 4
New depth marks for 6.5 mm 6
Instruments overview
ELEMENT L 6.5 mm/PF B 6.0 mm 8
Case design/X-ray reference sphere
ELEMENT L 6.5 mm/PF B 6.0 mm 10
Prosthetics overview
ELEMENT L 6.5 mm/PF B 6.0 mm 11
4 © Thommen Medical
L 6.5 mm/PF B 6.0 mm ELEMENT implants
2
ELEMENT implants are now available in platform B 6.0 mm. Additionally,
an implant length of 6.5 mm has been added for ELEMENT platforms
B 4.0 mm, 4.5 mm, 5.0 mm and the new platform B 6.0 mm. These new
sizes create additional treatment options to improve flexibility and ease
of use.
Advantages at a glance
· ELEMENT length 6.5 mm is ideal for cases with limited
vertical bone height or difficult nerve anatomy
· Bone augmentation procedures may be simplified
or eliminated to improve predictability and reduce
treatment time
· ELEMENT platform 6.0 mm is perfectly suited for large
molar restorations
· Identical surgical procedures
© Thommen Medical 5
ELEMENT for esthetic indications
ELEMENT implant are ideal for esthetically demanding anterior cases
where maximum flexibility in implant placement depth is required. The
1.0 mm implant collar may be placed supra- or subcrestally, as determined
by bone and soft tissue levels, in order to obtain a subgingival margin and
highly esthetic final result.
The new ELEMENT implant sizes offer added flexibility for posterior cases
as well, with the new platform B 6.0 mm being ideal for larger molar
restorations, and the new 6.5 mm length particularly suited to cases with
limited vertical bone height and/or close proximity to the mandibular
nerve.
ELEMENT platform B 6.0 mm completes the line of ELEMENT implants
for all available platform sizes of the Thommen Implant System.
ELEMENT length 6.5 mm and platform B 6.0 mm dimensions
New sizes are marked in orange.
ELEMENT implants
PF B 3.5 mm PF B 4.0 mm PF B 4.5 mm PF B 5.0 mm PF B 6.0 mm
Length
endosseous B 3.5 mm 4.0 mm 4.2 mm 5.0 mm 6.0 mm
core B 2.8 mm 3.5 mm 3.5 mm 4.3 mm 5.3 mm
6.5 mm 4.13.905 4.13.906 4.13.907 4.13.908
8.0 mm 4.13.900 4.13.904 4.13.901 4.13.902 4.13.903
9.5 mm 4.13.940 4.13.914 4.13.941 4.13.942 4.13.943
11.0 mm 4.13.910 4.13.924 4.13.911 4.13.912 4.13.913
12.5 mm 4.13.950 4.13.934 4.13.951 4.13.952 4.13.953
14.0 mm 4.13.920 4.13.944 4.13.921 4.13.922
17.0 mm 4.13.930 4.13.931
1.0 mm
endosseous B
PF B
core B
L
6 © Thommen Medical
Previous size SPI®VECTOdrills™ and thread taps have been revised to in-
clude a new mark for length 6.5 mm and feature distinctive narrow widths
for the 11.0 mm and 6.5 mm depth marks to make it easier to identify
both the mark and the position of the drill.
New size VECTOdrills™ and thread taps (B 5.3 mm) for ELEMENT plat-
form B 6.0 mm also use the same depth marks as described above.
Reading the new depth marks:
· Broad depth marks are read on both the lower and upper edge (for
example, 8.0 mm and 9.5 mm).
· Narrow depth marks are read only on the lower edge (for example,
11.0 mm); the upper edge is not used.
Previous size depth gauges have been revised to include an additional
groove and depth indication for length 6.5 mm. A new depth gauge
(B 5.3 mm) for ELEMENT platform B 6.0 mm also uses this design.
The diagram on the left shows the new depth marks and the corre-
sponding depths. The distance to the individual drilling depths is unchan-
ged at 1.5 mm per mark.
Important
The use of existing instruments bearing the previous depth marks is per-
missible only with implants from length 8.0 mm. New instruments with
revised depth marks must be used for length 6.5 mm implants. Simulta-
neous use of previous and new instruments is not recommended as this
may cause errors.
For information on implant bed preparation, please refer to the corre-
sponding brochure, “Surgical Procedure Fo_22d009”.
New depth marks for 6.5 mm
17.0
mm
15.514.012.511.09.58.06.5
17.0
mm
15.514.012.511.09.58.06.5
Old
Old
New
New
© Thommen Medical 7
Revised ELEMENT profile drills
To accommodate length 6.5 mm implants, the design of the ELEMENT
profile drill has been revised: the guiding tip of the drill has been short-
ened by 1.0 mm, and the length of the shaft extended by 1.0 mm (meaning
the same overall length). The depth mark is unchanged.
Only new ELEMENT profile drills may be used with length 6.5 mm
im plants.
The corresponding instruments are shown individually on the following
pages.
Availability
New ELEMENT implant sizes and corresponding instruments/abutments
will be launched in three phases.
Phase 1
January 2010:
· ELEMENT platform B 6.0 mm, with lengths from 6.5 mm to 12.5 mm
· ELEMENT length 6.5 mm, platforms B 4.0 mm, 4.5 mm and 5.0 mm
· All new and modified surgical instruments for length 6.5 mm and plat-
form B 6.0 mm with the exception of items noted in Phase 2 and 3
· X-ray templates
Phase 2
February 2010:
· EASY long abutments, sets for platform B 6.0 mm
· Surgical cassette insert
Mid-2010:
· EASY SELECTION abutments for platform B 6.0 mm
· VECTOdrill™ ceramic twist drills
Phase 3
Second half-year 2010:
· VECTOdrill™ for DSS stop
· Explan tation drills, and guiding cylinders for platform B 6.0 mm
Your local Thommen Medical representative will advise you of the avail-
ability of the new products.
Old New
B
A
29
mm
29
mm
8 © Thommen Medical
VECTOdrill™ twist drill, single-useSterile-packaged; stainless steel
Pilot drill
Length B 2.0 mm B 2.8 mm B 3.5 mm B 4.3 mm B 5.3 mm
29.0 mm extrashort 2 3.03.624 Q4 3.03.625 Q4 3.03.626 Q4 3.03.627 Q4 3.03.628 Q4
34.0 mm short 3.03.610 Q4 3.03.612 Q4 3.03.614 Q4 3.03.616 Q4 3.03.618 Q4
40.0 mm long 3.03.611 Q4 3.03.613 Q4 3.03.615 Q4 3.03.617 Q4
VECTOdrill™ ceramic twist drill, reusable Ceramic
Pilot drill
Length B 2.0 mm B 2.8 mm B 3.5 mm B 4.3 mm B 5.3 mm
29.0 mm extrashort 2 3.03.660 1 3.03.662 1 3.03.664 1 3.03.666 1 3.03.668 1
34.0 mm short 3.03.661 1 3.03.663 1 3.03.665 1 3.03.667 1 3.03.669 1
Drill B 1.5 mm, single-useSterile-packaged; stainless steel
Length
34.0 mm short 3.03.690 Q4
Depth gauge B 1.5 mm, customizable lengthTitanium
Length
30.5 mm 3.03.692
VECTOdrill™ depth gaugesTitanium
Pilot drill
Length B 2.0 mm B 2.8 mm B 3.5 mm B 4.3 mm B 5.3 mm
27.5 mm 3.03.630 3.03.632 3.03.634 3.03.636 3.03.638
New instruments for ELEMENT platform B 6.0 mm are marked in orange.
1 Available approximately as of summer 2010
2 VECTOdrill™ twist drills extrashort can be used only with implant lengths of 6.5–14.0 mm
Q4 packaging unit: 4 units
VECTOdrill™ twist drills for DSS stop will be available as of mid-2010
Instruments overviewELEMENT L 6.5 mm/PF B 6.0 mm
© Thommen Medical 9
Thread tap, reusableStainless steel
PF B 3.5 mm PF B 4.0 mm PF B 4.5 mm PF B 5.0 mm PF B 6.0 mm
Length
endosseous B 3.5 mm 4.0 mm 4.2 mm 5.0 mm 6.0 mm
34.0 mm 3.03.680 3.03.682 3.03.684 3.03.686 3.03.688
ELEMENT profile drill, single-useSterile-packaged; stainless steel
Length
29.0 mm extrashort 3.03.651 Q4 3.03.657 Q4 3.03.653 Q4 3.03.655 Q4 3.03.659 Q4
Explantation drill for ELEMENT implantsStainless steel
Length
external B 4.3 mm 5.0 mm 5.0 mm 6.3 mm 7.3 mm
internal B 3.8 mm 4.5 mm 4.5 mm 5.3 mm 6.3 mm
31.0 mm short 3.03.303 1 3.03.304 1 3.03.304 1 3.03.305 1 3.03.306 1
37.0 mm short 3.03.300 1 3.03.301 1 3.03.301 1 3.03.302 1
Explantation drill for ELEMENT ImplantsStainless steel
Length
external B B3.7 mm B 4.4 mm B4.4 mm B5.2 mm B6.2 mm
3.0 mm 3.03.308 3.03.307 3.03.309 3.03.310 3.03.313 1
Nonsterile
Consult instruction
for use
Caution
1250
Surgical cassette
The cassette insert has been revised to incorporate the necessary
holders and instructions for ELEMENT implants platform B 6.0 mm.
The newly labeled cassette insert and the complete surgical cassette
will be available starting January 2010.
1 Available starting second half-year 2010
Q4 packaging unit: 4 units
10 © Thommen Medical
Case design/X-ray reference sphereELEMENT L 6.5 mm/PF B 6.0 mm
17.015.514.012.511.09.58.06.5
0.5
6.5
9.5
12.5
8.0
11.0
14.0
17.0
0
6.5
9.5
12.5
8.0
11.0
14.0
17.0
0
6.5
9.5
12.5
8.0
11.0
14.0
17.0
0
6.5
9.5
12.5
8.0
11.0
14.0
17.0
0
8.0
11.0
14.0
17.0
6.5
9.5
12.5
0
8.0
11.0
14.0
17.0
6.5
9.5
12.5
0
8.0
11.0
14.0
17.0
6.5
9.5
12.5
0
6.5
9.5
12.5
8.0
11.0
14.0
17.0
0
17.015.514.012.511.09.58.06.5
0.5
6.5
9.5
12.5
8.0
11.0
14.0
17.0
0
6.5
9.5
12.5
8.0
11.0
14.0
17.0
0
6.5
9.5
12.5
8.0
11.0
14.0
17.0
0
6.5
9.5
12.5
8.0
11.0
14.0
17.0
0
8.0
11.0
14.0
17.0
6.5
9.5
12.5
0
8.0
11.0
14.0
17.0
6.5
9.5
12.5
0
8.0
11.0
14.0
17.0
6.5
9.5
12.5
0
6.5
9.5
12.5
8.0
11.0
14.0
17.0
0
1.0 : 1 1.1 : 1 1.2 : 1 1.3 : 1E B 6.0 B 6.0 B 6.0 B 6.0 E
1.0 : 1 1.2 : 1
1.1 : 1 1.3 : 1
1.4 : 1 1.5 : 1 1.6 : 1 1.7 : 1E B 6.0 B 6.0 B 6.0 B 6.0 E
1.4 : 1 1.6 : 1
1.5 : 1 1.7 : 1
0 10 20 30
1
0 10 20 30
1
0 10 20 30
1
0 10 20 30
1
0 10 20 30
1
0 10 20 30
1
0 10 20 30
1
0 10 20 30
1
Careful case design is crucial for the successful outcome of any implant-based resto-
ration.
The corresponding X-ray reference sphere for preoperative planning of ELEMENT
implants of platform B 6.0 mm can be ordered using the article number Fo_20d152.
ELEMENT implants of length 6.5 mm are already integrated in the existing X-ray refer-
ence spheres and can be ordered using article number Fo_20d132.
1 3.03.140 X-ray reference sphere, B 5.0 mm
© Thommen Medical 11
All existing platform B 6.0 mm prosthetics are suitable for use with ELEMENT platform
6.0 mm implants. The SPI®EASY range has been expanded to include long versions of
individual abutments, abutment sets, and SPI®SELECTION abutments.
For information regarding the use of EASY abutments, please refer to the respective
brochure (Fo_02d081).
Packaging
As reference to the new ELEMENT implant length of 6.5 mm, yellow labels have been
attached to the corresponding product packages of instruments and implants.
Yellow identification labels are used as follows
Instruments: Packages bearing this yellow label contain an instrument that is suitable
for an implant length of 6.5 mm.
Implants: Packages bearing this label contain an implant that requires the use of
instruments suitable for length 6.5 mm implants.
Prosthetics overviewELEMENT L 6.5 mm/PF B 6.0 mm
1 Available as of February 2010
2 Available approximately as of mid-2010
EASY SELECTION abutmentAluminum, anodized/plastic (PPSU)
PF B 3.5 mm PF B 4.0 mm PF B 4.5 mm PF B 5.0 mm PF B 6.0 mm
Height Cone
6.0 mm 4.0 mm S.4.03.710 S.4.03.718 S.4.03.711 S.4.03.712 S.4.03.713 2
8.0 mm 6.0 mm S.4.03.714 S.4.03.719 S.4.03.715 S.4.03.716 S.4.03.717 2
EASY abutment setTitanium
Height Cone
6.0 mm 4.0 mm 1.04.710 1.04.718 1.04.711 1.04.712 1.04.713 1
8.0 mm 6.0 mm 1.04.714 1.04.719 1.04.715 1.04.716 1.04.717 1
EASY abutment Titanium
Height Cone
6.0 mm 4.0 mm 4.03.710 4.03.718 4.03.711 4.03.712 4.03.713 1
8.0 mm 6.0 mm 4.03.714 4.03.719 4.03.715 4.03.716 4.03.717 1
Abutments
NewHaNdliNgRequiresInstrumentswith 6.5 mmdepth marks
NewHaNdliNg
Suitable for all implant lengths, including 6.5 mm
SWISS PRECISION AND INNOVATION. SWISS PRECISION AND INNOVATION.
Fo
_2
2d
150
.00
12
/09
AH
A,
BA
SE
L
www.thommenmedical.com
Headquarters
Thommen Medical AG Hauptstrasse 26d | CH-4437 WaldenburgSwitzerlandPhone +41 (0)61 965 90 20Fax +41 (0)61 965 90 [email protected]
Subsidiaries/National Distributors
AustraliaGunz Dental Pty Ltd. City South Business ParkUnits 3-4, 26-34 Dunning Ave Rosebery NSW 2018 | Australia Phone +61 2 9935 6677 Fax +61 2 9935 6666 www.gunz.com.au
AustriaThommen Medical Austria GmbHTechnologiezentrum NeusiedlLudwig Boltzmann Straße 2A-7100 Neusiedl am SeePhone +43 (0)5 9010 29230Fax +43 (0)5 9010 [email protected]
Canada Thommen Medical Canada Inc.1100 Burloak Dr. | Suite 300Burlington, ON L7L 6B2 | CanadaPhone +1 (905) 336-8966 +1-877-242-6012 (North America)Fax +1 (905) 332-3007 +1-877-242-6013 (North America) [email protected]
China Shanghai Yujing Trading Co., Ltd.Room G | Floor 15 | Jia Fa Bldg. No. 129-1 Da Tian Rd.Shanghai 200041 | ChinaPhone +86-21-62723077Fax +86-21-62175264
FranceThommen Medical France10, avenue PiernéF-77680 Roissy-en-Brie I FrancePhone +33 (0) 1 83 64 06 35Fax +33 (0)3 89 33 52 [email protected]
GermanyThommen Medical Deutschland GmbHAm Rathaus 2 | D-79576 Weil am RheinPhone +49 (0)7621-4 22 58 30 Fax +49 (0)7621-4 22 58 [email protected]
Great Britain/IrelandPanadent Limited149 Sevenoaks Way Orpington I Kent I BR5 3AQ I EnglandPhone +44 (0)1689 881788Fax +44 (0)1689 [email protected]
ItalyDental Trey S.r.l.Via Partisani, 3 | 47016 FiumanaPredappio (FC) | ItalyPhone +39 0543 929111Fax +39 0543 [email protected]
Japan/AsiaThommen Medical Japan Inc. Representative Office Asia3-20-14, Senriyama-Nishi | SuitaOsaka 565-0851 | JapanPhone +81-(0)6-6385-4255Fax +81-(0)[email protected]
JapanJ. Morita Corporation23-28, 1-chome, Esaka-choSuita City | Osaka 564-0063 | JapanPhone +81-(0)6-6384-6921Fax +81-(0)6-6384-6746http://spi.dental-plaza.com
MexicoDiDeSwiss S.A. de C.VVenustiano Carranza #502-ADespacho 102 | Colonia UniversidadToluca, CP 50130 | Edo. de MexicoCP 50130 | MexicoPhone +52 (722) 2-77-74-57 Phone/Fax +52 (722) [email protected]
Middle EastStar Science International GmbHJupiterstrasse 57 | 3015 Bern | SwitzerlandPhone +41 (0)31 941 07 31Fax +41 (0)31 941 07 [email protected]
NetherlandsThommen Medical Benelux B.V. Edisonweg 17B3404 LB IJsselsteinPostbus 4303400 AK IJsselstein | NetherlandsPhone +31 (0)30 68 68 468Fax +31 (0)30 68 68 [email protected]
New ZealandGunz Dental Pty Ltd. PO Box 99176 Newmarket | Auckland 1149 New Zealand Phone +64 9 366 0249 Fax +64 9 522 2910 www.gunz.co.nz
PolandC. Witt i Spółka Sp. z.o.o.87-100 Toruń, ul. Św. Katarzyny 4/4Phone +48 56 652 16 95Fax +48 56 655 01 [email protected]
SingaporeFONDACO Pte Ltd7 Kaki Bukit Road 1, #03-06,Eunos Techno Link, Singapore 415937Phone +65 6392 2806Fax +65 6392 [email protected]
South KoreaDami Medical Co., Ltd.6F, 426-1, Hapjeong-dong, Mapo-guSeoul 121-886 | South KoreaPhone +82-(0)2-3141-2875Fax +82-(0)2-3141-2877www.damimedical.com
Spain/PortugalISP Implante Suizo de PrecisiónC/ los quintos n 103350 Cox (Alicante) | SpainPhone +34 (0)96 536 1020Fax +34 (0)96 675 [email protected]
Switzerland Thommen Medical (Schweiz) AGPostfach 1160 | Neckarsulmstrasse 28CH-2540 GrenchenPhone +41 (0)32 644 30 20Fax +41 (0)32 644 30 [email protected]
TaiwanTing Sing Trading Co., Ltd.No. 30 | Sec. 2 | Chang-An East RoadTaipei | Taiwan | R.O.C.Phone +886-2-25420968Fax +886-2-25420969www.tingsing.com.tw
TurkeyRISUS Medikal Ürünler İthalat İhracat ve Eğitim A.Ş. (RISUS MEDİKAL A.Ş.) Fulya Mah. Pehlivan Sk. Meriç Konak Ap. No. 3 D. 23Mecidiyeköy | İstanbul | TurkeyPhone +90-212 2130573Fax +90-212 [email protected]
USAThommen Medical USA L.L.C.Idea Center | 1375, Euclid Avenue Cleveland OH 44115Toll free phone number: +1-866-319-9800Fax [email protected]