new 7210 new pos technology limited

Contents Checklist

The following items should be found inside the box:

For you safety

Use only approved power supply for NEW7210, using other power supply may damage the

device.

How to use rechargeable Li-ion battery properly.

The battery should be connected when POS terminal is working properly.

Use only approved rechargeable battery.

Do not dispose of battery in fire or water.

Do not expose battery to temperature above 60℃. Store it in the environment between

-20℃ and 60℃.

Charge with a charger designated for the device.

Keep the contact surface of battery away from metal to avoid battery short.

Recycle or dispose of expired battery properly complying with local environment

requirement.

***

***

Do not use ethanol or other corrosive liquid to clear the device.

NEW7210

Mobile payment terminal

PRODUCT MANUAL

NEW POS TECHNOLOGY LIMITED

NEW POS Technology limitedNEW 7210

*

1 POS terminal 1PCS2 AC Power Supply 1PCS3 USB Cable 1PCS4 Li-ion Battery 1PCS5 Thermal paper roll 1PCS (Optional)6 Stylus cable 1PCS (Optional)7 Product Manual 1PCS

Product manual

NEW7210 is a powerful PCI approval,EMV approval payment terminal , with extraordinary

performance in data intensive、multiple applications and EMV transactions.

mobile

Interface Figure

Parts function description Paper holder lid: Holding thermal paper roll ( Φ40X58mm)

Handle: Pull handle to open the paper holder lid

LCD display: 2.8 inch and 320*240 TFT LCD . Optional signature capture function.

Antenna inductive zone:

The zone for tapping contactless card

Key pad: 10 alphanumeric keys,8 functional keys,1 power switch key.

User smart card slot:

Supporting EMV card with contact surface facing up.

Magnetic stripe card reader :

ISO7812,1/2 Tracks or 2/3 Tracks or 1/2/3 Tracks, bi-directional swiping with

the magnetic stripe facing LCD .

Programable LEDs: Programable LEDs to show the status.

Signature pen: Electronic signature pen

Rubber pad: Two rubber pads, anti-vibration/non-slip.

Tag label: Showing model name, rated device parameter.

Barcode Label: Indicating device serial number.

Band Label: Indicating the frequency of communication module.

Back cover: Remove the cover to install battery or SIM/UIM/SAM card.

LED indicator: It indicates the power status of device.

USB Port: USB communication interface.

1NEW7210 Product manual

Top view Back view

Paper holder Lid

LCD display

Keypad

User smart card slotMagnetic stripe card

Rubber pad

Barcode Label

Tag label

Back cover

Stylus pen

Antennainductive zone

Handle

NEW7210 Figure

Product Introduction

NEW POS Technology limited

2NEW7210 Product manual


USB Port LED Indicator

Programable Leds(Optional)

Lanyard hole

1. Install the Battery* Remove the back cover of the device;

* Connect the cable of the battery and put the battery to its place ;

* Slide the back cover into its place.

2. Remove the Battery* Remove the back cover of the device;

* Hold the battery brace and lift the battery gently;

* Remove the battery.

3. Install the SIM/UIM card* Remove the back cover of device;

* Insert the card into the SIM/UIM card slot .

4. Remove the SIM/UIM card* Remove the back cover of device;

* Draw the SIM/UIM card out the slot.

Note Make sure that the device is in power off status when installing or removing SIM/UIM card.

5. Switch the device on* Press the power key" ", and the LCD backlight is switched on. Hold the power key for more

than two seconds, then the buzzer of device beeps to show device boots successfully and LCD

shows the corresponding program launch menu;

* The device can be powered by battery or AC power supply.

6. *

the LCD backlight will be switch off.

Switch the device offKeep pressing the power key" "for more than two seconds. The device will beeps and

NEW7210 Product manual


Installation Guidance

3 4NEW7210 Product manual


7. Loading thermal Paper roll * Pull the handle on the paper holder lid to open the lid up;

* Load the paper roll into the paper holder and extend the paper for 2-3 cm above paper cutter ;

* Close the paper holder lid;

* Please take out the paper shaft and replace the print paper timely when it runs out.

Open the backcover figure

Install the battery figure

Plug cable figure

Remove the battery figure

Install card figure

SIM/UIM

8. Tearing off the paperHold the thermal paper edge, keep the paper at 45 degree angle with the LCD surface, tear off

the paper from left to right with steady speed.

*

5

Note During loading paper roll, keep the thermal sensitive film of paper (external side of paper roll)

facing the thermal head of printer to ensure normal printing.

After long term printing, keep away from thermal printer head for high temperature.

Keep away from the thermal printer paper cutter for the sharp edge.



How to tear off paper How to swipe card

9. Swiping a Magnetic Stripe Card* During card swiping, the magnetic stripe should be downward and face the LCD of terminal.

Swipe it through the slot located on the right side of the terminal bidirectionally;

* Swipe the card at steady speed.

6

Note During swiping,keep the lower edge of the magnetic stripe card horizontally with the card

guiding surface. Or it maybe lead to swiping card error.


10. Contactless card (optional)* For top tapping card, contactless card antenna inductive zone is located on the space on the LCD.

Tap the contactless card above the LCD horizontally for some seconds. The buzzer will prompt

the cardholder the completion of transaction.


Loading thermal paper roll figure

b

11. Insert user smart card* Insert smart card with the gold-colored contact surface facing up into the card slot.

View LCD ICC card icon to determine if IC card is inserted into its place. If the IC card icon is

switched on, it indicates OK. While the icon is off, please confirm whether gold-colored contact

surface of card is facing up and IC card is inserted into its place.

12. Battery Charge* Remove the back cover of the device . Insert the rechargeable battery.

Slide the back cover into its place.(If the rechargeable battery is in the device, the step is

unnecessary.)

* Connect the big end of the USB cable to power supply and the small end of cable to the miniUSB

Port on the left side of device. Plug the power supply in the wall socket. LED indicator on the side

of device shows red indicating that battery is in charging status. If the LED indicator shows

green, it indicates battery charge completes.

Note If the device is in powered-off state, Only LED indicator on the side of device shows battery

charge status. While the device is in powered-on state, Battery icon on the LCD display also

indicates the battery charge status.

NEW7210


Insert user smart card

8

EnvironmentWorking Environment:

Temperature: 0 ~ 50 ( 32 ~ 122 ). Humidity: 10% ~ 90%

(non-condense).

Storage Environment:

Temperature: -20 ~ 60 ( -4 ~140 ). Humidity: 5% ~ 95%

(non-condense).

Technical Specifications

7 Product manual NEW7210 Product manual


Terminal characteristicsProcessor: 32 bit secure ARM11 CPU,400MHz.

Memory: 128MB FLASH,64MB SDRAM.

Display：

Keypad： 10 alphanumeric keys,8 functional keys,1 power switch key.

Magnetic Card Reader:Compliant with ISO7811,ISO7812;Track1/2/3,bi-directional swipe,

supports smart error correcting.

IC Card Reader: 1 user card(EMV4.3),supports SLE4442/SLE4428 memory card.

PSAM Slots: 1/2 PSAM slots,compliant with ISO7816.Supports PPS protocol,up to 300 kbps.

Contactless Card Reader:

(Optional) Supports Mifare classic,Mifare Ultralight, Mifare DESFire, ISO 14443A&

B,SONY Felica.

Internal PIN PAD: Supports MK/SK,Fixed,DUKPT,Supports dual and triple length TDES.

Supports RSA,AES.

Internal wireless(optional):GPRS / CDMA / Wi-Fi / WCDMA / CDMA2000/Bluetooth,supports

full SSLv2/3 TLSv1.

Remote download：Supports NewTMS remote download.

Peripheral Ports： 1 USB OTG.

Printer: High speed thermal printer,Easy-load style

Language: English, French, German, Latin, Russian, Arabic, Vietnam etc..

Dimensions: 170mm*85mm*55mm(L*W*H).

Weight: 356g.

Power Supply: Input:100~240VAC,50Hz/60Hz.Output:5VDC,1A.

Battery: 2600mAh,3.7V,more than 30 hours standby time,supports 200 transactions.

Optional: Backup battery.

Identification: CCC,CE,RoHS,PCI PTS5.X,EMV4.3 level 1&2,PBOC3.0.

2.8 inch ,320*240 TFT LCD.Optional signature capture function.

℃ ℃

℃ ℃

℉ ℉

℉℉13. * Take out the cable from the bag with specification, and connect the stylus and terminal with the

cable to prevent the loss of stylus.

How to connect the stylus to the terminal

NEW7210 Product manualNEW7210 Product manual

NEW POS Technology limited reserves the right to substitute, add or alter any item in the manual.

NEW POS Technology limited tries best to avoid literal error and does not accept any responsibility

for it.

NEW POS Technology limited undertakes no responsibility for any loss and harms that result from

misuse the device not complying with the instruction of product manual.

All rights reserve.

Special statement

Security guidance during PIN-entry

**

**

*

NEW POS Technology limited NEW POS Technology limited

NEW POS TECHNOLOGY LIMITED

Address: 14/A,Financial Technology Building,Science & Technology

Park,No.11,Keyuan Rd,Nanshan District,ShenZhen,China

Tel: +86-4006-520589 Fax: +86-755-82790632

E-mail: [email protected] Postalcode: 518057

WebSite: www.newpostech.com

1. Warranty valid for 12 months after purchasing date.

2. This warranty will be voided if the product is damaged due to natural disaster, fire,

unauthorized alteration or improper usage.

3. Free Warranty covers original parts only

4. Warranty service will not be provided if no the dealer's stamp or this card is missing.

Note:

NEW7210 belongs to attended device.

Install the device on an adjustable stand that allows consumers to swivel the terminal side

ways and/or tilt it forwards/backwards to a position that makes visual observation of the

PIN-entry process difficult.

Place the in-store security cameras where the PIN-entry keypad is not visible.

Card holder had better use his/her body and hands to prevent visual observation of PIN-entry

process.

Do not outlet PIN to others or write the password on card.

new 7210 new pos technology limited

Documents