www.airliquidewelding.com

EUROTOME 2

User-friendly, multipurpose,high-performance and cost-effectivethermal cutting machine

This is the evolution of the renowned HPC, which isacclaimed throughout the thermal cutting market.

It manages the whole of the cutting machine: fromthe trajectory to the process.

Thanks to its new design, as well as its large 19” touch-screen display, the HMI is a user-friendly tool.

HPC DIGITAL PROCESS 2

EUROTOME 2

2016

-320

2016

-319

Air Liquide Welding constantly aims at providing its clients with the best thermal cutting machinesfor flame and/or plasma cutting procedures. It detected its clients focused on the following factors:a sturdy, flexible and cost-effective machine that is quick and easy to implement, with excellentcutting quality, safe and with low running costs. Air Liquide Welding therefore developed a new EUROTOME machine to complete its range of cutting machines.

2

Transverse guidingThe beam is fitted with a double ball-bearing railway allowing for smooth movements of the machines and therefore optimal cutting quality.

The racks are facing backwards tolimit buffing associated with projectedmaterials and cutting dust.

2016

-323

Material & communication

• ETHERCAT bus management,• Industrial PC,• SSD hard disk,• Real-time system.

Fitted with a 19” touch control board (HPC digital process 2), EUROTOME 2 can be used for any business, from the smallest thickness value (0,5 mm) to bigger ones, thanks to flame and/or plasma cutting processes.

Designed around the concept of versatility, EUROTOME 2 can therefore be fitted with various tools: 1 to 4 oxy-torches, 1 or 2 plasma systems,a marking tools and a VXK chamfering tool.

With the various formats of the beam in terms of width (size 15, 20,25 & 30) and length of the railways (original rail with an available length of 3 m – it can be extended with modules by 3 m or 1.5 m) EUROTOME 2 can adapt to a wide variety of sheet metal formats:1500 x 3000 mm, 2000 x 6000 mm…

Oxy EssentialAutomatic gas adjustment system forflame cutting.

It is used to control up to 4 oxy-torchesfrom the numerical control panel according to the desired thickness you need to cut.

Longitudinal railsThe longitudinal guiding consists of sturdy rails fitted with severalfeet for mounting the machine even on rough flow. The driveand guiding systems consist of drawing rails and racks facingoutwards.

The mid-height position of the cable chain trays allows you to easily clean the ground.

Permanent brushing system of the rails to retain an optimal drive of the machine, even under heavy-duty conditions.

Drive units of the machinesBrushless geared motors without game andmaintenance-free, fitted with 750 W motorsand 30-teeth pinions with a quick replacementsystem.

The assembly is controlled with a new-generationETHERCAT communication variator and ensuressmooth movement for the machine, which allowsyou to reach high cutting quality levels.

2016

-325

2016

-336

2016

-326

Safety & complianceSafety devices ((light barriers and emergencystop buttons) ensuring optimal protection forthe operator.

The machine complies with the newmachinery directive EN ISO 17916:2016.

Plus, it is interconnected to the environmentaround it: process and treatment of cuttingsmoke.

The intervention mode allows for easy access to cutting tools.

2016

-328

Design and manufacturing of EUROTOME in the production site of Parthenay (France).ISO9001-certified production site.

2

Parthenay

2016

-324

2016

-319

Size and features

Main technical features

CN HPC DIGITAL PROCESS 2.

Control panel Compact and swivel 19” touch control panel with height and tilt adjustment.

Control panel size Size 1500, 2000, 2500 and 3000 mm.

Available longitudinal stroke 3000 available as standard with possibility of extending it up to 15 m (extension by 3 m and 1.5 m).

Speed 15 m / min (in accordance with the regulation limits of the machinery directive).

Maximum cutting speed 10 m / min.

Longitudinal drive unit

• Simple or double 750W BRUSHLESS drive unit (according to the width of the machine and process install on the machine).

• Reduced play reducers.• Module 2 30-teeth pinions.

Transverse drive unit• 750W BRUSHLESS drive unit.• Reduced play reducer.• Module 2 30-teeth pinion.

Machine origin Machin origin system included as standard.

Transverse guidingMachined beam with built-in racks and a double ball-bearing railway. Sturdy and can adapt to the most extreme of conditions, whilst offering smooth guiding.

Longitudinal railsMachined beams with built-in racks, calibrated drawing elements and a permanent brushing systemfor the rails. They are fitted with several feet, which means they can be aligned even on rough terrains.

Site height 700 to 800 mm.

Machine protections• Protective light beam at the front and at the back of the machine.• Emergency stops located on the control panel and the sides of the machine.• Emergency stop line interconnected with its environment: processes, filters, etc.

Machine A B C D* ET15 2015 mm 3300 mm 3600 mm 2040 mm 1500 mmT20 2515 mm 3800 mm 4100 mm 2540 mm 2000 mmT25 3015 mm 4300 mm 4600 mm 3040 mm 2500 mmT30 3515 mm 4800 mm 5100 mm 3540 mm 3000 mm

* : For the 1st additional tool-holder, move back by 185 mm. For the second additional OP, move back by 155 mm (this also applies for the 3rd and 4th one).

Dimensions on a standard railway (Length 4500 mm))

Additional roller railway with 3 m or 1.5 m elements.

A : Rail centre distance.

B : Overall width.C : Overall length.

D : Stroke of the 1st

tool-holder without an additional tool.

E : Sheet metal size.

Compatible plasmacutting systems

Main features The oxy-torches

NERTAJET 40i / OCP100• 100 A @ 100%, 120 A @ 60%,• 12 mm production piercing plate /

20 mm maximum piercing plate,• 40 mm sheet metal edge,• Inverter technology,• OCP100 without HF & air-cooled,• Air/Air.

Processes and features.

NERTAJET 50 / CPM15• 150 A @ 100%,• 20 mm production piercing plate /

25 mm maximum piercing plate,• 50 mm sheet metal edge,• Chopper technology,• CPM15 with HF & water-cooled,• Air/Air – N2/N2 – ArH2/N2.

Electricaligniter and height-adjustment probe.

Positioning laser.

Markers:

• Micro vibration,• Pneumatic,• Felt.

OXYCUT MACH OXY• Cutting capacity: 6 to 200* mm• Cutting quality,• Sturdy,• User-friendly.

OXYCUT MACH HP• Cutting capacity: 6 to 200* mm,• Productivity,• Cutting quality,• Assembly without tools of

consumables: quick & simple,• Longevity,• Full metal sheet piercing plate:

100* mm.

* Limits associated with the flow rate of OXY Essential.

NERTAJET HPimanual or automaticgas console

High-precision plasma cutting and marking• Water-cooled CPM400 torch nose-piece,• HPI multi gas processes.

NERTAJET HPi 150• 150 A @ 100 %,• 25 mm production piercing plate,• 40 mm sheet metal edge.

NERTAJET HPi 300• 300 A @ 100 %, • 40 mm production piercing plate,• 70 mm sheet metal edge.

EUROTOME 2

VXK chamfering.

2008

-470

2014

-514

_ret

Vortex air cooler.

2015

-626

Pipe cutting.

2012

-581

2012

-280

• Air/Air.

2014

-222

2013

-571

_x

2000

-281

_ret

2007

-281

2014

-396

2014

-391

2014

-399

Contacts

Air

Liqu

ide

Wel

ding

Fra

nce

rese

rves

the

right

to m

odify

its

appl

ianc

es w

ithou

t prio

r no

tice.

Imag

es, d

escr

iptio

ns a

nd c

hara

cter

istic

s ar

e on

ly m

eant

as

a gu

ide

and

cann

ot b

ind

the

man

ufac

ture

r.©

ALW

F -

02/2

017

- P

LDB

109

52

BELGIUMAIR LIQUIDE WELDING BELGIUM SAZ.I. West Grijpen - Grijpenlaan 5 - 3300 TIENENTel.: +32 16 80 48 20 - Fax: +32 16 78 29 22

CHINAHANGZHOU SAF OERLIKON Weld. Cut.Shanghai Commercial Branch - Rm 1108 Pine City Hotel777 Zhao Jia Bang Lu - SHANGHAI 200032Tel.: +86 21 64 43 89 69 - Fax: +86 21 64 43 58 97

CZECH REPUBLIC AIR LIQUIDE CZ S.R.O. - Welding and CuttingPodnikatelská 565 - Areál SVUM - 190 11 PRAHA 9 - BúchoviceTel.: +420 274 023 163 - Fax: +420 274 023 233

FRANCEAIR LIQUIDE WELDING FRANCE25, boulevard de la Paix - CS 30003 Cergy Saint-Christophe95895 CERGY-PONTOISE CEDEX - FranceTel.: +33 1 34 21 33 33

GERMANYOERLIKON SCHWEISSTECHNIK GmbHIndustriestrasse 12 - D-67304 EISENBERG/PFALZTel.: +49 6351 4760 - Fax: +49 6351 476 335

HUNGARY see address in Romania

ITALYFRO-AIR LIQUIDE WELDING ITALIA S.p.ALoc. Casalmenini, 3 - 37010 RIVOLI-VERONESE (VR)Tel.: +39 045 82 91 511 - Fax: +39 045 82 91 536

LUXEMBOURGAIR LIQUIDE WELDING LUXEMBOURG S.A.5 rue de la Déportation - BP 1385 - L-1415 LUXEMBOURGTel.: +352 48 54 56 - Fax: +352 48 54 57

MALAYSIASAF-OERLIKON MALAYSIA SDN BHDNo 10, Jalan TPP 5/1Taman Perindustrian Puchong - 47100 PUCHONG, SELANGORTel.: +603 8060 8638 - Fax: +603 8061 620

NETHERLANDSAIR LIQUIDE WELDING NETHERLANDSRudonk 6 B - NL 4824 AJ BREDATel.: +31 76 541 00 80 - Fax: +31 76 541 58 96

POLANDAIR LIQUIDE WELDING POLSKA - SP. Z.o.oUL. Porcelanowa 10 - 40-246 KATOWICETel.: +48 32 609 04 50 - Fax: +48 32 609 04 60

PORTUGALAIR LIQUIDE SOLDADURA LDARua Dr. António Loureiro Borges, 4-2° ArquiparqueMiraflores - 1495-131 ALGÉSTel: +351 21 41 64 900 - Fax: +351 21 41 69 40

ROMANIADUCTILAleea Industriilor Nr 1 - 120224 BUZAUTel.: +40 238 722 058 - Fax: +40 238 716 861

RUSSIAAIR LIQUIDE WELDING17 Vorontsovskaya Str. - 109147 MOSCOW Tel.: +7 495 641 28 98 - Fax: +7 495 641 28 91

SCANDINAVIAOERLIKON SKANDINAVIEN ABStarrägen 100 - 232 61 ARLÖVTel.: +46 (0)40 670 15 00 - Fax: +46 (0)40 670 15 01

SLOVAKIAAIR LIQUIDE WELDING CENTRAL EUROPE S.R.O.Hlohovecká 6 - 951 41 NITRA - LUŽIANKYTel.: +421 37 692 4610 - Fax: +421 37 651 28 04

SPAINOERLIKON SOLDADURA SAPoligono Industrial la Noria Carretera de Castellon Km-15,500 - 50730 El Burgo de Ebro - ZARAGOZATel.: +34 976 10 47 00 - Fax: +34 976 10 42 67

SWITZERLANDOERLIKON SCHWEISSTECHNIK AG Mandachstrasse 54 - CH 8155 NIEDERHASLI Tel.:+41 44 3076 111 - Fax: +41 44 3076 112

THAILANDEAIR LIQUIDE WELDING THAILAND Co. Ltd.40 Moo 6 - Ramindra Road Km 9.5KHANNAYAO, BANGKOK 10230Tel.: +66 29 43 2250 - Fax: +66 29 43 2256

UAEAIR LIQUIDE WELDING MIDDLE EAST FZEJebel Ali free zone warehouse No. FZS1AH05P.O. BOX 18734 - Jebel Ali - DUBAITel.: +971(0)48861606 - Fax: +971(0)48861608

U. K.AIR LIQUIDE WELDING LtdLow March / London Road - DAVENTRY - Northants NN11 4SDTel.: +44 1 327 70 55 11 - Fax: +44 1 327 70 13 10

The world leader in gases, technologies and services for Industry and Health, Air Liquide is present in 80 countries with approximately 68,000 employees andserves more than 3 million customers and patients. Oxygen, nitrogen and hydrogen are essential small molecules for life, matter and energy. They embody Air Liquide’sscientific territory and have been at the core of the company’s activities since its creation in 1902.

Contacts for other countries:Air Liquide Welding International DevelopmentDepartment Italy Loc. Casalmenini,337010 - RIVOLI-VERONESE (VR)Tel.: +39 045 82 91 511- Fax: +39 045 82 91 536

Air Liquide Welding International DevelopmentDepartment FranceAIR LIQUIDE WELDING FRANCE25, boulevard de la Paix - CS 30003 Cergy Saint-Christophe95895 CERGY-PONTOISE CedexTel.: +33 1 34 21 33 33