network configuration support (dsr) support matrix version … · 2019-05-08 · nortel passport...

Network ConfigurationManager Device ServicesSupport (DSr) SupportMatrix Version 26.0.0Hotfix 1VMware Smart Assurance 9.6.1

Network Configuration Manager Device Services Support (DSr) Support Matrix Version 26.0.0 Hotfix 1

VMware, Inc. 2

You can find the most up-to-date technical documentation on the VMware website at:

https://docs.vmware.com/

If you have comments about this documentation, submit your feedback to

[email protected]

Copyright © 2019 VMware, Inc. All rights reserved. Copyright and trademark information.

VMware, Inc.3401 Hillview Ave.Palo Alto, CA 94304www.vmware.com

https://docs.vmware.com/

mailto:[email protected]

http://pubs.vmware.com/copyright-trademark.html

Contents

1 Preface 13

Revision history 13

Purpose 13

Audience 14

Related documentation 14

Conventions used in this document 14

Where to get help 15

Your comments 15

2 Introduction 16

Overview 16

3 Device Driver Information 18

New device drivers 18

Modified Driver 18

Enabling inactive device classes 18

Viewing installed device driver packages 19

Configuring FTP Transfer Service 19

4 3COM Devices 20

3Com Netbuilder II Router 20

3Com Switch 5500 23

5 ACCEDIAN Devices 28

Accedian AEN-1000-GE-H 28

6 ACME Devices 32

ACME NetNet SBC 32

7 Adtran Devices 37

Adtran NetVanta 37

Adtran NetVanta Switch 41

Adtran MX 46

Adtran Ethernet NTU 49

8 Adva Devices 53

Adva FSP150CC 53

Adva FSP150CCGE201 57

VMware, Inc. 3

9 Airespace Devices 61

Airespace Switch 61

10 Allot Devices 65

Allot Devices 65

11 Alcatel Devices 68

Alcatel OmniAccess 68

Alcatel OmniCore 73

Alcatel Omnistack 76

Alcatel Omniswitch 79

Alcatel Service Router and Ethernet Service Switch 84

Alcatel EFM 89

Alcatel EFM 1531 92

12 Alvarion Devices 96

Alvarion Breeze AP 96

13 APC Devices 99

APC Power Strips 99

14 Arista Devices 103

Arista 7000 103

15 Aruba Devices 107

Aruba Wireless Switch 107

16 AudioCodes Devices 111

AudioCodes MediaPack 111

17 Avocent Devices 115

Avocent ACS 115

18 Bigswitch Devices 118

Bigswitch Controller 118

Bigswitch Switch 121

19 Blade Networks Devices 124

Blade Networks G8000 Switch 124


VMware, Inc. 4

20 BlueCoat Devices 129BlueCoat SG 129

BlueCoat PacketShaper 133

21 Brocade Devices 136

Brocade 7500 136

Brocade McData 139

Brocade MLX 143

Brocade FCX 147

Brocade FOS 151

Brocade VDX 154

Brocade TurboIron 157

22 Cambium Devices 161

Cambium Canopy 161

23 Carrier Access Devices 164

Adit 600 164

24 Checkpoint Devices 168

Checkpoint Firewall-1 168

25 Ciena Devices 174

Ciena Router 174

Ciena Switch 178

26 Cisco Devices 182

Cisco Aironet AP VXWorks 183

Cisco ACS 185

Cisco PIX Firewall 188

Cisco VPN 3000 193

Cisco Aironet AP 197

Cisco Aironet Bridge 203

Cisco Application Control Engine 208

Cisco BPX 211

Cisco CatOS Switch 216

Cisco Content Appliance 223

Cisco Content Services Switch 227

Cisco IOS Router 231

Cisco IOS Switch 240

Cisco IOS XR 250

Cisco Intrusion Prevention System (IPS) 255


VMware, Inc. 5

Cisco IronPort 258

Cisco Lightstream 262

Cisco Nexus 268

Cisco MGX 273

Cisco MDS 278

Cisco Wide Area Application Services (WAAS) 283

Cisco Wireless LAN Controller 287

Cisco GSS 291

Cisco UCS 295

Cisco SG 297

Cisco 300 Series 301

Cisco FirePower Cisco FirePower Cisco FirePower 307

Cisco FirePower SM 310

Cisco FirePower TD 312

Cisco FirePower K9 315

Cisco WSA 317

27 Citrix Devices 320

Citrix Netscaler LoadBalancer 320

28 Covaro Devices 324

Covaro switch 324

29 D-Link Devices 327

D-Link xStack 327

30 Digi Devices 331

Digi ConnectPort 331

Digi TransPort 334

31 Dell Devices 338

Dell PowerConnect 338

32 Edgewater Devices 344

Edgewater EdgeMarc Router 344

33 Enterasys Devices 348

Enterasys SSR 348

34 Ericsson Devices 352

Ericsson ECN Switch 352

Ericsson MSED 355


VMware, Inc. 6

35 Extreme Devices 359

Extreme Switch 359

ExtremeWare XOS 363

36 F5 Devices 367

F5 Load Balancer Rev 3 367





37 Force10 Devices 390

Force10 C-Series Router 390

Force10 E-Series Router 394

Force10 S-Series Router 398

38 Fortinet Devices 403

Fortinet Fortigate 403

Fortinet FortiAnalyzer 406

39 Foundry Devices 409

Foundry EdgeIron 409

Foundry B4000 412

40 GE Devices 417

GE MDS Access Point and Remote 417

41 Gigamon Devices 421

Gigamon Switch 421

Gigamon 4.7 425

42 H3C Devices 427

H3C Switch 427

H3C Router 430

43 Hirschmann Devices 435

Hirschmann Rail Switch 435

44 HP Devices 439

HP GbE2c BladeSwitch 439

HP ProCurve Switch 444


VMware, Inc. 7

HP 3600V2 Switch 450

HP 3600V2 Router 453

45 Huawei Devices 457

Huawei Router 457

Huawei Switch 462

Huawei SmartAX 466

46 IBM Devices 471

IBM BladeCenter 1/10Gb Uplink Ethernet 471

IBM BladeCenter Virtual Fabric 474

47 Intermec Devices 478

Intermec MobileLAN 478

48 Juniper Devices 482

Juniper ERX (E Series) 482

Juniper Router 487

Juniper EX2500 Switch 493

Juniper Switch (EX Series) 498

Juniper WXC 504

NetScreen Firewall 508

49 Lantronix Devices 513

Lantronix ETS 513

Lantronix EDS 515

50 Laurel Devices 518

Laurel ST Router 518

51 Linux Devices 522

Linux 522

52 Lucent Devices 525

Lucent Access Point 525

53 Marconi Devices 528

Marconi ASX 528

54 McAfee Devices 532

McAfee IntruShield 532


VMware, Inc. 8

55 MDS Devices 535MDS iNet 535

56 Metamako Devices 539

MetamakoSwitch 539

57 Milan Devices 542

Milan 542

58 Motorola BSR 546

Motorola BSR Router 546

59 MRV Devices 550

MRV LX Terminal Server 550

60 NetCache Devices 554

NetCache 554

61 Netopia Devices 557

Netopia R7000 Series 557

62 Nokia Devices 560

Nokia IP 560

63 Nortel Devices 566

Nortel Alteon 566

Nortel Router 570

Nortel Baystack 574

Nortel BoSS Switch 576

Nortel Contivity 579

Nortel Multi-Service Switch 583

Nortel Passport 8600 586

Nortel 4500 Switch 590

Nortel Passport 1648 594

64 OneAccess Devices 597

OneAccess OneOS 597

65 OpenGear Devices 601

OpenGear ACM50XX 601


VMware, Inc. 9

66 Overture Devices 605Overture NC 605

Overture NG 608

Overture NP 612

Overture 1400 617

67 Packeteer Devices 621

Packeteer PacketShaper 621

68 Palo Alto Firewall Devices 625

Palo Alto Firewall 625

Palo Alto Firewall Rev 8 628

69 Paradyne Devices 632

Paradyne 9100 632

70 Patton Devices 635

SmartNode Router 635

71 Qtech Devices 639

Qtech 2800 639

Qtech 2900 642

72 Radware Devices 645

Radware WSD Load Balancer 645

Radware Switch V2 648

73 Redback Devices 652

Redback SmartEdge 652

74 Redline Devices 657

Redline RDL3000 657

75 Riverbed Devices 661

Riverbed Steelhead 661

76 Riverstone Devices 665

Riverstone Router 665

77 Ruckus Devices 669

Ruckus Switch 669


VMware, Inc. 10

78 RuggedCom Devices 673RuggedCom RS900 673

79 Samsung Devices 677

Samsung Router 677

80 SEL Devices 681

SEL Switch 681

81 Siemens Devices 686

Siemens Router 686

Siemens hiX56xx DSLAM 689

82 Solaris Devices 694

Solaris 694

83 SourceFire Devices 697

Sourcefire 3D Sensor 697

84 Starent Devices 701

Starent PDSN 701

85 Symbol Devices 705

Symbol WS-2000 705

Symbol RFS 710

86 Tasman Devices 714

Tasman Router 714

87 Telco Devices 719

Telco Switch 719

Telco T-Metro 722

88 Vanguard Devices 727

Vanguard Router 727

89 VegaStream Devices 731

VegaStream Vega400 731

90 Vyatta Devices 734

Vyatta Router 734


VMware, Inc. 11

91 WiliboxDevices 738Wilibox WILI-S 738

92 Zeus Devices 742

Zeus Load Balancer 742

93 Zyxel Devices 746

Zyxel Prestige 746

94 ZTE Devices 750

ZTE 750


VMware, Inc. 12

Preface 1As part of an effort to improve its product lines, VMware periodically releases revisions of its software andhardware. Therefore, some functions described in this document might not be supported by all versions ofthe software or hardware currently in use. The product release notes provide the most up-to-dateinformation on product features.

Contact your VMware technical support professional if a product does not function properly or does notfunction as described in this document.

Note This document was accurate at publication time. Go to VMware Online Support docs.vmware.comto ensure that you are using the latest version of this document.

This chapter includes the following topics:

n Revision history

n Purpose

n Audience

n Related documentation

n Conventions used in this document

n Where to get help

n Your comments

Revision historyRevision history lists the revision history of this document.

Table 1‑1. Revision history

Date Revision Description of change

May, 2019 01 GA release

PurposeThis document lists the device driver information forVMware Smart Assurance Network Configuration Manager Device Services Support (DSr) release.

VMware, Inc. 13

http://support.emc.com

AudienceThis document is part of the VMware Smart Assurance Network Configuration ManagerDevice Services Support (DSr) documentation set, and is intended for use by individuals who have theresponsibility of installing and deploying devices and device drivers.

Readers of this document are expected to be familiar with the following topics:

n Windows® and Linux® operating systems

n Database architecture and concepts

n Security management

n Internet protocols, including HTTP, TCP/IP, File Transfer Protocol (FTP), and Telnet

n Lightweight Directory Access Protocol (LDAP) and directory services

n Authentication and authorization

Related documentationRelated documents include:

n VMware Smart Assurance Network Configuration Manager Device Services Support (DSr) Version26.0 Hotfix 1 Read Me

Conventions used in this documentVMware uses the following conventions for special notices:

Note NOTICE is used to address practices not related to personal injury.

Typographical conventionsVMware uses the following type style conventions in this document:

Bold Use for names of interface elements, such as names of windows, dialog boxes, buttons, fields,tab names, key names, and menu paths (what the user specifically selects or clicks)

Italic Use for full titles of publications referenced in text

MonospaceUse for:n System output, such as an error message or scriptn System coden Pathnames, filenames, prompts, and syntaxn Commands and options

Monospace italic

Use for variables.


VMware, Inc. 14

Monospace bold

Use for user input.

[ ] Square brackets enclose optional values

| Vertical bar indicates alternate selections — the bar means “or”

{ } Braces enclose content that the user must specify, such as x or y or z

... Ellipses indicate nonessential information omitted from the example

Where to get helpVMware support, product, and licensing information can be obtained as follows:

Product information

For documentation, release notes, software updates, or information about VMware products, go toVMware Online Support at:

docs.vmware.com

Technical support

Go to VMware Online Support. You will see several options for contacting VMware Technical Support.Note that to open a service request, you must have a valid support agreement. Contact your VMwaresales representative for details about obtaining a valid support agreement or with questions about youraccount.

Your commentsYour suggestions will help us continue to improve the accuracy, organization, and overall quality of theuser publications. Provide your opinion of this document to the feedback option of:

docs.vmware.com


VMware, Inc. 15

http://support.emc.com

Introduction 2This chapter contains the following topics:

n Overview

OverviewThe following information is included in this Support Matrix document.

n Device Driver Features and Information

n Additions to Existing Device Drivers

n Known Device Driver Issues

n Additional Device Driver Support Information

What is Network Configuration Manager ?n An automated compliance, change and configuration management solution that delivers industry-

recognized best practices.

n A collaborative network infrastructure design, controlled change processes, network device andservice configuration transparency, and compliance with corporate and regulatory requirements—toenable you to ensure the security, availability, and operational efficiency of your network.

n An automated support for all facets of the network infrastructure lifecycle, seamlessly integratingcritical design, change, and compliance management requirements.

CompatibilityThis release is certified to work with Network Configuration Manager 9.6.1 or below (lowest supportedversion is 9.3), on the following environments:

n Red Hat Enterprise Linux 6.x

n Red Hat Enterprise Linux 7.x

n Microsoft Windows Server 2012

VMware, Inc. 16

n Microsoft Windows Server 2016

Note The VMware Smart Assurance Network Configuration Manager Installation Guide documentprovides operating system versions and system requirements.


VMware, Inc. 17

Device Driver Information 3This chapter includes the following topics:

n New device drivers

n Modified Driver

n Enabling inactive device classes

n Viewing installed device driver packages

n Configuring FTP Transfer Service

New device driversThere are no device driver added in this release.

Modified DriverThe following driver that has been modified in this release:

n Cisco Nexus

n Added support for model C9364C, Nexus9000 C9364C, C9364.

n Cisco IOS Router

n Added support for model CSR1000V, ciscoCSR1000v.

n Cisco IOS Switch

n Added support for model WS-C2960L-24TQ-LL.

n Cisco Wireless LAN Controller

n Added support for model AIR-CTVM-K9, AIR-CT3504-K9.

n Palo Alto Firewall

n Added support for model PA-850.

Enabling inactive device classesTo enable a device class that is not enabled by default, follow these steps.

VMware, Inc. 18

Step Action

1 Select Tools > System Administration from the Network Configuration Manager menu bar.

2 Select Global > Device Classes to open the Global Managed Device Classes window.

3 Click the Manage List button.

4 Highlight the Supported Device Class you want to enable, and click the Add button. Repeat this step for alldevice classes you are enabling.

5 Click Ok.

6 Click Apply.

Note Changes to device classes may affect the underlying Auto Discovery device classes' configuration.

7 Click Yes to confirm the changes.

8 Click Ok.

9 Click Close.

Viewing installed device driver packagesTo view a list of installed device driver packages, follow these steps.

Step Action

1 Log into the server as a user with administrator privileges.

2 Navigate to the [Product Home]/bin directory.

3 Run the perl versiondb.pl --query command.

Note This command can be run on either the Application Server or the Device Server. Theversiondb.pl tool reports information based on the server where it is run.

Configuring FTP Transfer ServiceTo support FTP transfers for configuration management on some devices, an FTP service must beconfigured on the device server(s). Refer to the individual driver documentation to determine if thisservice must be configured for your device.

As a minimum, the following characteristics must be present; any additional security precautions are theresponsibility of the end-user.

n An anonymous FTP user (typically user anonymous) must be enabled.

n The anonymous FTP user’s home directory must be set to $TFTPHOMEDIR/ftp, and cannot beworld-writeable.

n The path $TFTPHOMEDIR/ftp/backup must exist and the backup directory must be world-writeable.

n The FTP user must be able to create subdirectories under $TFTPHOMEDIR/ftp/backup. This mayrequire additional settings for the FTP service employed.


VMware, Inc. 19

3COM Devices 4This chapter includes the following topics:n 3Com Netbuilder II Router

n 3Com Switch 5500

3Com Netbuilder II RouterDevice Type Router

Specific Model(s)

nb2, 2 port nbtr NBTR Remote Access, 4 port nb1 NB Remote, 2 port nb1 NBRemote Access, 2 port boundary rtr NB Remote Control, 4 port tok.ring nb1NBTR Remote, tok.ring boundary rtr NBTR Remote Control, nb2 4-slot, nb2 8-slot, netbuilder Rem. Office (spectre), 2 Lan nb1 NB Local, 2 Lan nbtr NBTRLocal, NB Rem Ctl w/2 wan ports, NBTR Rem Ctl w/2 wan ports, SpectreLarge (SuperStackII 22x), Spectre Huge (SuperStackII 22x), Spectre ISDN(SuperStackII 42x), 8 slot nb2, 8 slot nb2, fw versions, sw versions, SpectreISDN, SpectreTR4x8 (superStackII 32x TR), SpectreTrIsdn4x8 (SSII 52xTR/ISDN), SpectreTrxxx (SSII 32x TR), Spectre2Eth (SSII 22x Eth swver>9.1), Spectre2EthIsdn (SSII 42x Eth/ISDN sw ver > 9.1), officeConnect,Intrepid (SuperStackII NBSI 2xWan:intrepid, 4xWan:blueridge), Score (PBS5xx tunnel switch), Copper (PB S4xx WAN convergence switch), Easter(SuperStack II Router 400)

Operating System and Firmware Versions Not Available

Communication Protocols TELNET, SSH, TELNET/TFTP, SSH/TFTP, OOB

Configuration Files Content ASCII

Configuration Change Notification (Events) Syslog, SNMP Traps

Discovery/Identify Methods SNMP

Credential Management SNMP v1/v2, Account

Operating System Management Protocols Not Available

Quick Commands Ping

VMware, Inc. 20

Features available

Features Available Support

Auto-Discovery Yes

Pull configuration Yes

Push configuration Yes

Configlets Yes

Credential Management Yes

Operating System Management No

Cut-Through Access Yes

Hardware Information No

SNMP Traps Yes

Syslog Yes

Rollback No

Quick Commands Yes

Privilege Mode Termlet Yes

User Mode Termlet No

Discovery/identify methodsThe following information must be available for this driver class to manage an applicable device.

n SNMP

n sysDescr value contains “SW/NBII”

n sysObjectID contains at least one of the following 1.3.6.1.4.1.43.1.4. (2 | 11 | 12 | 22 | 23)

Device OperationsThe following device operations must be enabled to manage an applicable device using this driver class.

Configuration capturen Terminal/TFTP

n Get the boot directory using the sf 4 command

n Get a list of files in the boot directory excluding the BOOT.??K file

n Copy <fileName> <serverIPAddress>:<filename>


VMware, Inc. 21

Configuration deployn Terminal

n The configuration is sent to the command-line interface session, line by line, and each responseis checked for error responses.

n Terminal/TFTP

n Copy <fileName> <serverIPAddress>:<filename>

Credential managementn Account

n Syspassword <oldPassword> <newPassword>

n SNMP

n system (community | writecommunity) <newCommunity>

Device monitoringn Ping

n Reboot

n DF

Multi-config filesFollowing are the files used when storing and revisioning multiple configuration files for multi-configsupport.

Multi-config files Push Pull Post OperationContentType Protocols

running Yes Yes Copy to Start ASCII TELNET, SSH,TELNET/TFTP,SSH/TFTP, OOB

Device dataThe following data represents device data per device class.

Attributed data Terminal SNMP

ARP Table No Yes

Access Control Lists No No

CAM Table No No

File System Information No No

Identity No Yes


VMware, Inc. 22


Interfaces No Yes

Keys No No

Memory No No

Access Control Lists Match Counts No No

OSPF Settings No No

Physical Hardware No No

Routes No Yes

System Properties (Serial Number, OS Version, etc) No Yes

VLAN Trunk Protocol No No

VLANs No No

3Com Switch 5500Device Type Switch

Specific Model(s) 5500


Communication Protocols TELNET, SSH, TELNET/TFTP, SSH/FTP


Configuration Change Notification (Events) Not Available


Credential Management SNMP v1/v2, Account, Privilege Account

Operating System Management Protocols Not available

Quick Commands Ping, Traceroute, View Routes, View Arp, View Interfaces

Features available


Auto-Discovery Yes



Configlets Yes




Hardware Information Yes

SNMP Traps No


VMware, Inc. 23


Syslog No

Rollback Yes

Quick Commands Yes

Privilege Mode Termlet No

User Mode Termlet Yes


n SNMP

n sysDescr value contains “Switch 5500” (case-insensitive)

n sysObjectID contains 1.3.6.1.4.1.43.1.16.4.3


Configuration capturen Terminal

n display current-configuration

n display saved-configuration

n Terminal/TFTP

n backup fabric current-configuration to <SERVERIPADDR> <destFile>

n display startup

n tftp <SERVERIPADDR> put <xferFilename> <destFile>



n Terminal/TFTP

n tftp <SERVERIPADDR> get <configFilename> <tempFilename>

n copy <tempFilename> <SavedCfgFilename>


VMware, Inc. 24


n local-user <thisUser>

n level <level>

n service-type terminal telnet ssh

n password (simple | cipher) <password>

n undo local-user <oldUser>

n Privilege Account

n super password (simple | cipher) <newPrivPass>

n SNMP

n snmp-agent community (read | write) <newCommunityString>

n undo snmp-agent community <oldString>

Device monitoringn display current-configuration

n display saved-configuration

n display startup

n tftp <deviceServerAddress> (get | put) <localFilename> <remoteFilename>

n copy sourceFilename destFilename

n save filename

n delete filename

n ping ipAddress

n tracert ipAddress

n display ip interface

n display ip routing-table

n display arp



VMware, Inc. 25


running Yes Yes NA ASCII TELNET, SSH,TELNET/TFTP,SSH/FTP

startup Yes Yes Reboot ASCII TELNET, SSH,TELNET/TFTP,SSH/FTP



ARP Table No No


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory Yes No


OSPF Settings No No

Physical Hardware No Yes

Routes No No



VLANs No No

Known issuesThe following details existing device issues that have been discovered with other releases. In most cases,a resolution is included to address the issue.

3Com Switch 5500

n Editing comments generated by the device when capturing the configuration causes device warningsduring push operations.

n Inconsistencies in command behavior for configuration and credential management appear insoftware version 3.01, but not later versions.

n Startup configurations are the only file types retrieved.


VMware, Inc. 26

n User credentials cannot be removed during password rolls, due to the session use count. Theerror message User access number not 0 is displayed. Manual removal of the user credentials isuntested but might be successful.


VMware, Inc. 27

ACCEDIAN Devices 5This chapter contains the following topics:

n Accedian AEN-1000-GE-H

Accedian AEN-1000-GE-HDevice Type Switch

Specific Model(s) AEN-1000-GE-H, AMO-10000-NE, AEN-1000-GE, AMN-1000-TE-R

Operating System and Firmware Versions AEN_4.9.2.1_22919, AMO_10GE_5.4.1.5_30715, AEN_4.9.3.2_30737

Communication Protocols SSH/Telnet

Configuration Files Content Text


Discovery/Identify Methods SNMP, Terminal

Credential Management Account, SNMP v1/v2


Quick CommandsPing, Traceroute, Setup Diagnostic, View Diagnostic Setup, Setup NAT, ViewNAT Setup, View Diagnostic, View Routes,View Interface

Features available


Auto-Discovery Yes


Push configuration No

Configlets No





SNMP Traps No

VMware, Inc. 28


Syslog No

Rollback No

Quick Commands Yes




n SNMP

n sysObjectID contains 1.3.6.1.4.1.22420.1.1

n Terminal

n Output of "board show info" contains model name and serial number.

n Output of "board show info" contains hostname of the device.

Device operationsThe following device operations must be enabled to manage an applicable device using this driver class.


n Startup configuration

n Export configuration


n The text config, as captured, cannot be pushed to the device. Configlets must use the text configfor the destination.

n Terminal/TFTP

n A stored startup or running config is pushed to the system by transferring it to the system usingFTP and issuing the command-line interface command restore-backup-config <filename>.

Credential Managementn Account

n user add <username> password

n user delete <oldUser>


VMware, Inc. 29

n user edit <oldUser> password

n SNMP

n snmp edit <type> newString

Device monitoringn Board show info

n ping

n traceroute

n export configuration

n route show active

n interface show



Startup configuration No Yes NA Text SSH, Telnet



ARP Table No No


CAM Table No No


Identity Yes Yes

Interfaces No Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No Yes

System Properties (Serial Number, OS Version, etc) Yes Yes


VMware, Inc. 30



VLANs No No


VMware, Inc. 31

ACME Devices 6This chapter contains the following topics:

n ACME NetNet SBC

ACME NetNet SBCDevice Type Switch


Operating System and Firmware Versions 6.1

Communication Protocols TELNET, SSH, TELNET/FTP, SSH/FTP

Configuration Files Content ASCII, Binary



Credential Management Account, Privilege Account


Quick CommandsPing, View Routes, View ARP, View Interfaces, Save Config, Activate Config,Reboot Activate, Reboot Force

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

VMware, Inc. 32


Syslog No

Rollback Yes

Quick Commands Yes




n SNMP

n sysDescr value contains “Acme Packet Net-Net”

n sysObjectID contains 1.3.6.1.4.1.9148

n Terminal

n Get the model via terminal

n Get the serial number via terminal

n Check if there is an OID corresponding to the model found via terminal

n Get the package ID from the OID

n Check if the found package Id is matching the packed id of the current driver



n From a command line interface session, the output of show running-config is captured as the textconfig.

n Terminal/TFTP

n From a command line interface session, the command backup-config <filename> is issued. Thatfile is then transferred from the SBC using FTP and stored in binary form as the startup config.

n From a command line interface session, the command backup-config <filename> running isissued. That file is then transferred from the SBC using FTP and stored in binary form as therunning config.


VMware, Inc. 33


n The text config, as captured, cannot be pushed to the device. Configlets must use the text configfor the destination.

n Terminal/TFTP

n A stored startup or running config is pushed to the system by transferring it to the system usingFTP and issuing the command-line interface command restore-backup-config <filename>.


n ssh-password

n Privilege Account

n secret enable

Device monitoringn cli terminal-height

n enable

n exit

n configure terminal

n reboot activate

n save-config

n activate-config

n reboot force

n show routes

n show arp

n show interfaces

n show running-config authentication

n delete-backup-config

n backup-config

n show running-config

n restore backup-config

n ping

n show health


VMware, Inc. 34

n save config

n show memory usage

n check-space-remaining boot

n check-space-remaining code

n check-space-remaining ramdrv



startup-config Yes Yes Save ConfigOnly, SaveConfig andActivate, SaveConfig andReboot Activate

Binary TELNET/FTP,SSH/FTP

text-config Yes Yes Save ConfigOnly, SaveConfig andActivate, SaveConfig andReboot Activate

ASCII TELNET, SSH

running-config No Yes NA Binary TELNET/FTP,SSH/FTP



ARP Table Yes No


CAM Table No No

File System Information Yes No

Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes No


OSPF Settings No No


VMware, Inc. 35



Routes Yes No



VLANs No No

Known issuesThe following information details existing device issues that have been discovered within other releases.In most cases, a resolution is included to address the issue.

ACME NetNet SBC

n The ACME NetNet SBC driver is known not to work with pre-v6.1 systems, due to substantialdifferences in the way that configuration backups work.

n Models other than the 4250 may need to be manually added to the driver's models file, due to ACMEPacket not supplying a comprehensive list of SNMP Model OIDs.

n Pushing configlets to these systems may be problematic due to the way ACME's configuration editingworks. In order to edit many configuration items, such as SNMP communities, the user must select anexisting item to edit, which this driver cannot do. If you have advance knowledge of the system'sconfiguration you may be able to create a configlet that works, but the concept of selecting aconfiguration item to edit is not supported.

n Configlets always use the text config for the destination.

n A configlet is processed in the device's configuration mode. Ensure not to exit completely out ofconfig mode, as this causes the job to fail.

n Selection prompts are considered valid config prompts. The following configlet is now valid:

system

snmp-community

sel

public

1

ip-addresses (1.1.1.1 2.2.2.2)

done

exit

exit


VMware, Inc. 36

Adtran Devices 7This chapter includes the following topics:

n Adtran NetVanta

n Adtran NetVanta Switch

n Adtran MX

n Adtran Ethernet NTU

Adtran NetVantaDevice Type Router

Specific Model(s)

Atlas 800, Atlas Generic, Atlas 800 Plus, Atlas 550, Atlas 810, NetVanta 3200,NetVanta 3205, NetVanta 3305, NetVanta 5305, NetVanta 4305, Netvanta3430, NetVanta 3120, NetVanta 1335, Netvanta 4430,5660

Operating System and Firmware Versions 04.02.00, 05.02.00, 05.03.00, 06.01.00, R10.5.0.E

Communication Protocols TELNET/TFTP, SSH, TELNET, SSH/TFTP





Operating System Management Protocols TFTP

Quick Commands Standard quick commands

Features available


Auto-Discovery Yes



Configlets Yes


VMware, Inc. 37


Operating System Management Yes



SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes




n SNMP

n SysObjectID contains 1.3.6.1.4.1.664

n Terminal

n If there is a string matching “Netvanta” (case -insensitive) in the output of show version commandthen

n Get serial number from show version output

n Get host name from show running-config output

n Get object id from show version output



n show startup

n show running

n copy running-config startup-config

n Terminal/TFTP

n copy startup-config tftp

n copy running-config tftp


VMware, Inc. 38



n Terminal/TFTP

n copy tftp startup-config <SERVERIPADDR> <filename>

n copy tftp running-config <SERVERIPADDR> <filename>


n If AAA is enabled do the following

n no username <oldUserName>

n username <username> password <password>

n line (telnet 0 | console 0)

n no password

n no login

n login local-userlist

n Else


n no login local-userlist

n login

n password <password>

n Privilege Account

n no enable password <oldPrivPas>

n enable password [md5] <newPrivPass>

n SNMP

n no snmp-server community <oldCommunity>

n snmp-server community <newCommunity> RO|RW

Operating System managementn copy tftp flash

n boot system flash <newLoad> <currentLoad>

n erase


VMware, Inc. 39

Device monitoringn show memory heap

n show flash

n show version

n exit



n show startup

n show running

n copy tftp running-config

n copy tftp startup-config

n copy tftp flash

n copy flash tftp

n erase

n boot system flash

n enable

n disable

n configuration terminal

n end

n reload



running Yes Yes Copy to Start ASCII TELNET/TFTP,SSH, TELNET,SSH/TFTP

startup Yes Yes Reboot ASCII TELNET/TFTP,SSH, TELNET,SSH/TFTP


VMware, Inc. 40



ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes No


OSPF Settings No No

Physical Hardware Yes No

Routes Yes Yes



VLANs No No


Adtran NetVanta drivers

n Adtran NetVanta and Adtran NetVanta Switch drivers may experience problems if configured with themessage of the day banner.

Adtran NetVanta Router - Serial Numbers not Displaying

n The Adtran NetVanta Router does not show the serial number when using SNMP.

Adtran NetVanta SwitchDevice Type Switch

Specific Model(s)

NetVanta 1224, NetVanta 1224R, NetVanta 1224 STR, NetVanta 1224 STR,Total Access 916e, Total Access 924e, Total Access 908e, Total Access908e(3rd Gen), Total Access 900e, NetVanta 644

Operating System and Firmware Versions 06.01.03, A4.05.00.E, R10.9.0, R10.9.4.E


VMware, Inc. 41

Communication Protocols TELNET, SSH, TELNET/TFTP, SSH/TFTP






Quick Commands NA

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands No




n SNMP


n Get the number of interfaces with 1.3.6.1.2.1.2.1.0 OID and it should be greater than 4

n Terminal

n If there is a string matching “Netvanta” (case -insensitive) in the output of show versioncommand then

n Get serial number from show version output


VMware, Inc. 42

n Get host name from show running-config output

n Get object id from show version output

n There should be more than four interfaces listed in the command show interfaces.



n show startup

n show running


n Terminal/TFTP





n Terminal/TFTP

n copy tftp startup-config <SERVERIPADDR> <filename>

n copy tftp running-config <SERVERIPADDR> <filename>


n If AAA is enabled do the following

n no username <oldUserName>



n no password

n no login

n login local-userlist


VMware, Inc. 43

n Else


n no login local-userlist

n login


n Privilege Account

n no enable password <oldPrivPas>

n enable password [md5] <newPrivPass>

n SNMP


n snmp-server community <newCommunity> (RO|RW )


n boot system flash <newLoad> <currentLoad>

n erase

Device monitoringn show memory heap

n show flash

n show version

n exit



n show startup

n show running


n copy tftp startup-config

n copy tftp flash

n copy flash tftp

n erase

n boot system flash

n enable


VMware, Inc. 44

n disable

n configuration terminal

n end

n reload



running Yes Yes Copy to Start ASCII TELNET/TFTP,SSH, TELNET,SSH/TFTP

startup Yes Yes Reboot ASCII TELNET/TFTP,SSH, TELNET,SSH/TFTP



ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes No


OSPF Settings No No


Routes Yes Yes



VLANs No No


VMware, Inc. 45


Adtran NetVanta Switch drivers

n Adtran NetVanta and Adtran NetVanta Switch drivers may experience problems if configured with themessage of the day banner.

Adtran MXDevice Type Router

Specific Model(s) MX 2820

Operating System and Firmware Versions E04

Communication Protocols TELNET, TELNET/TFTP, SSH, SSH/TFTP

Configuration Files Content Binary

Configuration Change Notification (Events) Syslog, Trap


Credential Management SNMPv1/v2, Account

Operating System Management Protocols NA

Quick Commands NA

Features available


Auto-Discovery Yes



Configlets No





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands No


VMware, Inc. 46





n SNMP

n sysObjectID value contains 1.3.6.1.4.1.664.1.484

n Serial number is retrieved from .1.3.6.1.4.1.664.3.1.4.0

n System name is retrieved from 1.3.6.1.2.1.1.5

n Terminal

n NA



n Navigate through Menu system to "System Configuration Archive" menu.

n Select 3 to go to "SCA Operations" menu

n Select 1 to set TFTP server

n Select 2 to set Config Filename

n Select 4 to Perform "TFTP SCA Save"

n Check "SCA Save Status" for completion

Configuration deployn Terminal/TFTP

n Navigate through Menu system to "System Configuration Archive".

n Select 3 to go to "SCA Operations" menu.

n Select 1 to set TFTP server

n Select 2 to set Config Filename

n Select 5 to Perform "TFTP SCA Restore"

n Check "SCA Restore status" for completion


VMware, Inc. 47

Credential managementn SNMP

n Navigate through Menu system to "SNMP" menu

n Select 11 to set the "Read Community"

n Select 12 to set the "Write Community"

n Account

n New account creation

n Navigate through Menu system to "Security Administration" menu

n Select 3 to go to "Create New User Account"

n Select 1 to set "User-ID"

n Select 2 to set "Password"

n Select 3 to go to "Account Properties/Access Privilege" menu

n Select 1 to go to "Access Rights" menu

n Select 4 to set as "ADMIN"

n Select 2 to enable the user account.

n Password change

n Navigate through menu system to "Change <current user> password"

n Enter new password

Operating System managementn NA

Device monitoringn NA



running Yes Yes NA Binary TELNET/TFTP,SSH/TFTP


VMware, Inc. 48



ARP Table No Yes


CAM Table No No


Identity Yes Yes

Interfaces No Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No Yes



VLANs No No


n Being a menu-based device, only discovery via SNMP is supported.

n Interfaces are pulled via SNMP only. Due to current library code logic, only interfaces with a distinctname are shown as separate interfaces.

Adtran Ethernet NTUDevice Type Switch

Specific Model(s)NetVanta 873, Total Access 1424S-CE, NetVanta 818, NetVanta 838,NetVanta 838T, NetVanta 8044M

Operating System and Firmware Versions G01.05, G03.07

Communication Protocols SSH/Telnet,SNMP


Configuration Change Notification (Events) NA


VMware, Inc. 49




Quick CommandsPing, Traceroute, Setup Diagnostic, View Diagnostic Setup, Setup NAT, ViewNAT Setup, View Diagnostic, View Routes,View Interface

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

Syslog No

Rollback No

Quick Commands Yes




n SNMP

n sysObjectID value contains .1.3.6.1.4.1.664.1

n Terminal

n Output of "show version" contains model name,host name and serial number.



VMware, Inc. 50



n show startup-config


n Push by sending each line through the command-line interface.


n snmp-server community read-only <newCommunity>

n snmp-server community read-write <newCommunity>

n no snmp-server community read-only <oldSnmpCommunity>

n no snmp-server community read-write <oldSnmpCommunity>

n Account

n security

n username <username>

n password

n privilege admin

n no username <username>


Device monitoringn show version

n write

n ping

n traceroute



n show interfaces

n reload


VMware, Inc. 51



running Yes Yes copy to start TEXT SSH, Telnet

startup No Yes NA TEXT SSH, Telnet



ARP Table No Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No Yes



VLANs No No


n SNMP credential roll is supported but was not qualified in house due to device restrictions.


VMware, Inc. 52

Adva Devices 8This chapter includes the following topics:

n Adva FSP150CC

n Adva FSP150CCGE201

Adva FSP150CCDevice Type Switch

Specific Model(s) FSP150CCD-410, FSP150CC-825

Operating System and Firmware Versions 2.1, 7.0







Quick CommandsPing, Traceroute, View Routes, View ARP, View Interfaces, Resync, Set FTPCredentials

Features available


Auto-Discovery Yes



Configlets Yes





VMware, Inc. 53


SNMP Traps No

Syslog No

Rollback Yes

Quick Commands Yes




n SNMP

n sysDescr value contains “FSP150CC”

n sysObjectID contains 1.3.6.1.4.1.18022.1

n Terminal

n Model found from show system should be found in the Models file




n Terminal/FTP

n database backup

n database copy ftp put <serverip> <username> <password> <filename>



n database save

n Terminal/FTP

n database copy ftp get <serverip> <username> <password> <filename>

n show database copy


VMware, Inc. 54

n database restore active none


n configure system

n no user <username>

n add user <userName > <password>

n SNMP

n configure snmp

n communityname <newSnmpCommunity> (read-only | read-write)

n no communityname <oldSnmpCommunity>

Device monitoringn show system

n show ip routes static

n show arp

n show interface

n show ip

n show mgmttnl

n database backup

n show database copy

n database restore active none

n ping

n show ip route dynamic

n tracert

n reboot

n database save



VMware, Inc. 55


running Yes Yes Copy To Start ASCII TELNET, SSH

startup Yes Yes Reboot Binary TELNET/FTP,SSH/FTP



ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes No

Keys No No

Memory No No


OSPF Settings No No


Routes Yes Yes



VLANs No No


Adva FSP150CC

n This device can only transfer binary files using an external FTP server located on the device server. Itis the customer’s responsibility to setup and maintain a correctly configured FTP daemon on theappropriate device server.

n The driver will default to using the FTP credentials: anonymous / [email protected]. The defaultscan be changed on a device by device basis using the quick command named Set_FTP_Credentials.

n Some lines in the text (running) config cannot be sent back to the device using terminal input.


VMware, Inc. 56

Adva FSP150CCGE201Device Type Switch

Specific Model(s) FSP150CC-GE201

Operating System and Firmware Versions 4.3.2-27

Communication Protocols SNMP, Telnet, SSH, SSH/FTP, Telnet/FTP


Configuration Change Notification (Events) Trap, Syslog




Quick Commands Ping, Traceroute

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

Rollback No

Quick Commands Yes




n SNMP

n sysObjectID value contains 1.3.6.1.4.1.2544. 1.12.1.1.4.


VMware, Inc. 57

n Model number should be retrievable.

n Chassis Serial number or Sysname will be used for discovery.

n Terminal

n Should be able to retrieve Model number via term and that should resolve to Package ID.

n Chassis Serial Number or Sysname will be used for discovery.



n admin config-file

n show configfile <saved-configfile name> -- for saved configuration file which is delta betweenrunning config and default database

n show running-config current -- for running configuration

n Terminal/FTP

n admin config-file

n save <configFile>

n transfer-file ftp put <userid> [password | no-password] <password> <ip-address> <filename>

n show file-services-status

Configuration deployn Terminal/FTP

n admin config-file

n transfer-file ftp get <userid> [password | no-password] <password> <ip-address> <filename>

n show file-services-status

n restart-with-configfile <configfile name> yes

n Terminal

n Configuration can be deployed as running configuration by sending as command line


n config user-security

n add <username> <password> <password> superuser


VMware, Inc. 58

n show local-user <username>

n config-user <username>

n config-user <username> password <password> <password>

n delete <username>

n SNMP

n configure snmp

n add community <newSnmpCommunity> readonly

n add community <newSnmpCommunity> readwrite

n delete community <oldSnmpCommunity>

n show all-communities

n show community <community string>



n home

n show interface

n show arp-entries

n show ip-routes

n configure communication

n ping <ip addr>

n trace-route <ip-addr>

n show ping-result

n show trace-route-result



VMware, Inc. 59


Running-config Yes Yes copyToSaved ASCII SSH, Telnet

running-config-ftp Yes Yes Reboot ASCII Telnet/FTP,SSH/FTP



ARP Table Yes No


CAM Table No No


Identity Yes Yes

Interfaces No Yes

Keys No No

Memory No No


OSPF Settings No No


Routes Yes No



VLANs No No

Known issuesThe following information details existing device issues that have been discovered within other releases.

n Pull/Push via FTP is not supported due to issues with FTP connection.

n Interfaces are not supported via Term as the command returns only a single interface data instead ofthree returned by SNMP.

n While pushing the config file, there should be no ‘#end’ in the configuration file as this interferes withGUI-based elements and causes a failure.


VMware, Inc. 60

Airespace Devices 9This chapter contains the following topics:

n Airespace Switch

Airespace SwitchDevice Type Switch

Specific Model(s) AS-4012

Operating System and Firmware Versions 2.0.152.3







Quick Commands Ping, View Interfaces, View Routes Summary, View Arp Switch, Save Config

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

VMware, Inc. 61


Rollback Yes

Quick Commands Yes




n SNMP


n sysDescr contains “Airespace Switch”

n Model number .1.3.6.1.4.1.14179.1.1.1.3.0

n Terminal

n show sysinfo contains “Airespace Switch”

n Model number using show inventory



n show run-config

n Terminal/TFTP

n transfer upload datatype config

n transfer upload mode tftp

n transfer upload serverip <SERVERIPADDR>

n transfer upload path /

n transfer upload filename <fileName>

n transfer upload start




VMware, Inc. 62

n Terminal/TFTP

n transfer download datatype config

n transfer download mode tftp

n transfer download serverip <SERVERIPADDR>

n transfer download path /

n transfer download filename <fileName>

n transfer download start


n config mgmtuser delete <username>

n config mgmtuser add <username> <password> read-write

n config mgmtuser password <oldUser> p <TIME>

n config mgmtuser password <username> <password>

n SNMP

n config snmp community delete <newSnmpCommunity>

n config snmp community create <newSnmpCommunity>

n config snmp community accessmode (ro|rw) <newSnmpCommunity>

n config snmp community mode enable <newSnmpCommunity>

n config snmp community delete <oldSnmpCommunity>

Device monitoringn show sysinfo

n show inventory

n show tech-support

n show route-summary



VMware, Inc. 63


running Yes Yes NA Binary SSH/TFTP,Telnet/TFTP

readable_run-config Yes Yes Save Config,Reboot

ASCII SSH, Telnet



ARP Table No Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes No


OSPF Settings No No


Routes Yes Yes



VLANs No No


Airespace 4400

n Issue: Airespace devices drop the connection if the current user is deleted.

Resolution: When rolling credentials on Airespace devices, the old user is not deleted but insteadthe password is set to a random value.


VMware, Inc. 64

Allot Devices 10This chapter contains the following topics:

n Allot Devices

Allot DevicesDevice Type Linux Server

Specific Model(s) SSG600; netxplorer 15.1.10-14

Operating System and Firmware Versions Allot Kickstart 17.4.3 CentOS 7.1, Version AOS.SGVE.14.5.50 Build 46

Communication Protocols TELNET, SSH


Configuration Change Notification (Events) N.A.

Discovery/Identify Methods Terminal

Credential Management Account


Quick Commands

Standard Unix Quick Commands. Example : Finger, ps, Ping, Traceroute, ViewArp, View Interfaces, View

Routes

Features available


Auto-Discovery Yes



Configlets No





VMware, Inc. 65


SNMP Traps No

Syslog Yes

Rollback Yes

Quick Commands Yes




n Terminal

n etc/sysconfig/allot.conf this file should contain the model number containing SSG

n Uname -a should have the Linux keyword



n go config view

n /etc/sysconfig/allot.conf


n Account role is supported only for non root users

n For root user only password can be changed, following are the commands used:

"passwd username"

Operating System managementn Not supported

Device monitoringn Go config view

n /etc/sysconfig/allot.conf

n allottype


VMware, Inc. 66

n Actype

n Basic unix commands (df, hostname, ifconfig, uname etc.)



/etc/sysconfig/allot.conf No Yes NA ASCII TELNET, SSH

Go config view No Yes NA ASCII TELNET, SSH



ARP Table No No


CAM Table No No


Identity Yes No

Interfaces Yes No

Keys No No

Memory Yes No


OSPF Settings No No


Routes No No

System Properties (Serial Number, OS Version, etc) Yes No


VLANs No No


VMware, Inc. 67

Alcatel Devices 11This chapter includes the following topics:

n Alcatel OmniAccess

n Alcatel OmniCore

n Alcatel Omnistack

n Alcatel Omniswitch

n Alcatel Service Router and Ethernet Service Switch

n Alcatel EFM

n Alcatel EFM 1531

Alcatel OmniAccessDevice Type Wireless AP

Specific Model(s) OAW-4324-US, OAW-4306GW-US, OAW-4604-US

Operating System and Firmware Versions AOS-W 3.4, AOS-W 3.3.2.10, 3.4.2.5 (24358), 5.0.2.1







Quick Commands Standard Quick Commands

Features available


Auto-Discovery Yes


VMware, Inc. 68



Configlets Yes





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes




n SNMP

n SysObjectID should be 1.3.6.1.4.1.6486.800.1.1.2.2.2.1.1.2

n Terminal

n show version includes manufacturer and model information

n show running-config | include hostname includes hostname information



n show running

n show startup

n Terminal/TFTP

n copy startup-config tftp <serverIPAddress> <filename>

n copy running-config tftp <serverIPAddress> <filename>


VMware, Inc. 69


n A command-line interface session is started in config mode.

n The configuration is pushed line by line while checking responses for error codes.

n Terminal/TFTP

n A command-line interface session is started in config mode.

n copy tftp <serverIPAddress> <filename>

n copy flash


n mgmt-user <username> root

n Privilege Account

n enable secret

n SNMP

n no snmp-server community <oldSnmpROCommunity>

n snmp-server community <newSnmpROCommunity>

Operating Systemn copy tftp:<serverLocation> <srcFilename> system partition <bootPartitionNumber>

n reload

Device monitoringn show interface

n show version


n exit

n show inventory



VMware, Inc. 70


running Yes Yes Copy to Start ASCII TELNET, SSH,TELNET/TFTP,SSH/TFTP

startup Yes Yes Reboot ASCII TELNET, SSH,TELNET/TFTP,SSH/TFTP



ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes Yes


OSPF Settings No No


Routes Yes Yes



VLANs No No


Alcatel OmniAccess

n The configuration information obtained from a running config pull cannot be pushed back to thedevice. The running config push is done on a line by line basis through the command-line interface inconfig mode, due to there being no way to push an entire config file to running.


VMware, Inc. 71

n Some commands are not accepted and must be removed from the configuration before pushing a fullconfiguration. A few examples of lines that must be removed are:

n version 3.3

n enable secret "******"

n end

n Some commands are not valid and should be removed or replaced with valid commands beforepushing a full configuration. A few examples of lines that must be removed or replaced are:

n mms config 0

n controller config 0

n ip access-list eth validuserethacl

permit any

n ip access-list session validuser

any any any permit

n vpn-dialer default-dialer

ike authentication PRE-SHARE ******

n user-role ap-role

n user-role denyall

session-acl denyall

n user-role cpbase

session-acl cpbase

n user-role guest-logon

n user-role guest

n user-role stateful-dot1x

n user-role logon

n aaa pubcookie-authentication

n no crypto isakmp psk-caching

n no crypto-local isakmp permit-invalid-cert

n crypto isakmp groupname changeme

n crypto-local isakmp dpd idle-timeout 22 retry-timeout 2 retry-attempts 3

n crypto-local isakmp xauth

n vpdn group l2tp

ppp authentication PAP


VMware, Inc. 72

n vpdn group pptp

ppp authentication MSCHAPv2

n mgmt-user admin root 9bf216ef01dc8a58fdecefdd48e9482a5ef57ed326a34ffd75

n country US

n Some commands can only be pushed to the master switch and are not valid for a local switch. Thesecommands are displayed in the configs pulled from the device, but must be removed from the configsbefore pushing. See the AOS-W User Guide for more information.

Alcatel OmniCoreDevice Type Switch

Specific Model(s)

OmniCore 5022, OmniCore 5010, OmniSwitch 5, OmniSwitch 9,

OmniCell 5, OmniCell 9, OmniStack 1024, OmniStack 6024,

OmniCore 13, OmniAccess 408, OmniAccess 512, OmniStack 8008









Features available


Auto-Discovery Yes



Configlets No





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes


VMware, Inc. 73





n SNMP

n sysDescr value contains “Switch”

n sysObjectID contains 1.3.6.1.3.3003 or 1.3.6.1.4.1.3003



n write-config

n Terminal/TFTP

n write-config tftp:// <SERVERIPADDR> / <filename>



n Terminal/TFTP

n copy tftp:// <SERVERIPADDR> / <configFile> <voyence.conf>

n load-config <voyence.conf>

n del <voyence.conf>

n save startup.config


n password

n SNMP

n ip snmp (read-community | write-community) <snmpCommunity>


VMware, Inc. 74

Device monitoringn write mem

n utils

n file

n exit

n del

n save

n write-config






ARP Table No Yes


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory No Yes


OSPF Settings No No


Routes No No



VMware, Inc. 75



VLANs No No

Alcatel OmnistackDevice Type Switch

Specific Model(s) 6624, 6246, 8008, LS6224U

Operating System and Firmware Versions 1.0.0.47, 1.7.0.13 For LS6224U Models: 1.5.1.7



Configuration Change Notification (Events) Not available




Quick Commands Ping, Traceroute, View Arp, View Interfaces

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

Syslog No

Rollback Yes

Quick Commands Yes




VMware, Inc. 76


n SNMP

n sysObjectID contains 1.3.6.1.4.1.6486.800.1.1.2.2.4.1

n Serial Number retrieved successfully from ENTITY-MIB for row with class chassis (3)





n Terminal/TFTP

n copy running-config tftp <SERVERIPADDR> <fileName>

n copy startup-config tftp <SERVERIPADDR> <fileName>



n Terminal/TFTP

n copy tftp <SERVERIPADDR> <fileName> running-config

n copy tftp <SERVERIPADDR> <fileName> startup-config



n no username <oldUser>

n Privilege Account

n enable password level <level> <newPrivPass>

n SNMP

n snmp-server community <newString> (ro | rw) view default


VMware, Inc. 77

n no snmp-server community <oldString>

Operating Systemn show bootvar

n boot system <name>

n copy <fromPath> <toPath>

n show version

Device monitoringn ping

n traceroute

n show arp

n show ip interface

n enable

n disable

n config

n end

n no terminal datadump


n dir







VMware, Inc. 78


ARP Table No No


CAM Table No No

File System Information No Yes

Identity No Yes

Interfaces Yes No

Keys No No

Memory No Yes


OSPF Settings No No


Routes No No



VLANs No No


Alcatel Omnistack

n Push-to-Start using Telnet/SSH not supported.

n No volatile memory support using SNMP or command line interface

n Blank values are displayed in the client.

n Image files are listed in the file system information. Image files cannot be selected and backed up byname due to a limitation of the device. The active image can be backed up as an upgrade option.

n Boot file upgrades are not supported.

Alcatel OmniswitchDevice Type Switch

Specific Model(s)

6602-48, 6624, 6850, OS6850-P48, 7700, 9700, OS9616/OS9716-CFM2,Alcatel-Lucent OS6450-P10, Alcatel-Lucent OS6450-P24, Alcatel-Lucent OS6450-P48,

Alcatel-Lucent OS6900-X72


VMware, Inc. 79

Operating System and Firmware Versions

Operating systems for 6602-48 models: 5.1.6.243.R02 GA, 5.1.6.393.R01 GAOperating systems for 6850 models: 6.3.1.999.R01 Operating systems for7700 and 9700 models: 6.3.1.1023.R01 Operating systems for other models:5.1.5.83.R04, 6.3.4.378.R01 GA, 6.4.1.394.S01 GA



Configuration Change Notification (Events) SNMP Traps



Operating System Management Protocols FTP, SCP

Quick Commands Ping, Traceroute, View Routes, View Arp, View Interfaces

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog No

Rollback Yes

Quick Commands Yes




n SNMP

n sysObjectID value contains 1.3.6.1.4.1.6486.800.1.1.2.1

n Serial number is found in row (chassis class) of entPhysicalTable in ENTITY-MIB


VMware, Inc. 80

n Terminal

n sysObjectID is present in show system output

n Value contains 1.3.6.1.4.1.6486.800.1.1.2.1



n show configuration snapshot

n Terminal/FTP

n Configuration is pulled using FTP


n Device commands are issued interactively from the stored configuration (configlet only); eachcommand is sent line-by-line as long as the device returns to a prompt afterwards. The resultsare scanned for warnings and errors.

n Terminal/FTP

n Configuration is pushed using FTP


n show user password-size

n password

n user <username> password <password> <cmdFrag>

n no user <oldUser>

n snmp community map <snmpCred> user <username>

n SNMP

n no snmp community map <oldCommString>

n snmp community map <newCommString> user <username> enable

Operating Systemn ls

n delete


VMware, Inc. 81

n ftp

n binary

n hash

n lcd

n cd

n show system

n reload working no rollback-timeout


n show running-directory

n no more

n ping

n reload working no rollback-timeout

n show arp

n show chassis

n show cmm

n show configuration snapshot

n show hardware info

n show health

n show interfaces

n show ip interface

n show ip protocols

n show ip route

n show module long

n show running-directory

n show system

n traceroute

n copy running-config working

n copy working certified [flash-synchro]

n copy certffied working

n free space


VMware, Inc. 82



running Yes Yes Copy Runningto Working

ASCII TELNET, SSH

working Yes Yes Copy WorkingtoCertified,Rebootfrom Working

ASCII TELNET/FTP,SSH/FTP

certified Yes Yes Copy Certifiedto Working,Reboot

ASCII TELNET/FTP,SSH/FTP



ARP Table No Yes


CAM Table No No

File System Information Yes Yes

Identity Yes Yes

Interfaces Yes No

Keys No No

Memory Yes Yes


OSPF Settings No No


Routes No No



VLANs No No


VMware, Inc. 83


Alcatel Omniswitch

n Full configuration pushes for the working and certified files require FTP to be enabled. Configlets andthe running configuration use terminal mode only.

n Cold booting the device will use the configuration stored in /flash/certified/boot.cfg unless it is identicalto /flash/working/boot.cfg. If these files differ, the reload working no-rollback timeout commandmust be issued or configuration changes will fail. This can be done using cut-through.

n The Reboot from Working post-operation on configuration pushes does not warn the user aboutservice interruption.

n Post operations on working and certified configurations may potentially change the operating systemversion of the device if it is rebooted afterwards. This is due to the use of “copy working certified” and“copy certified working” commands for these operations. It is the user’s responsibility to ensure thatconfiguration content is compatible if the software images in the working and certified directoriesdiffer.

n SNMP credential rolls are not written to the certified (startup) configuration, which is a devicelimitation in the copy command syntax (as detailed in the previous bullet). The commit operation usedafter account and SNMP rolls uses “copy running working” to avoid copying software images as partof SNMP credential changes.

n The model name is reported differently through SNMP than through terminal: SNMP uses the chassisentry of ENTITY-MIB, while the terminal query uses the “Model Name:” field in the “show system”response, which corresponds to the CMM model.

n No restrictions are enforced on password length.

Alcatel Service Router and Ethernet Service SwitchDevice Type Router

Specific Model(s)7450 ESS-1, 7450 ESS-6, 7450 ESS-7, 7450 ESS-12, 7750 SR-1, 7750SR-12, 7750 SR-7,7705 SAR-8,7705 SAR-F,7210 SAS-M-1, 7705 SAR-H

Operating System and Firmware Versions SR OS Release 5 (B-5.0.R8, C-5.0.R8), TiMOS-6.1.R9 Untested: 7.0.R9

Communication Protocols TELNET, SSH, TELNET/FTP,SSH/FTP,SSH/SCP






VMware, Inc. 84

Operating System Management Protocols FTP, TFTP


Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

Syslog Yes

Rollback Yes

Quick Commands Yes




n SNMP

n Model found via SNMP should be found in models file.

n Get host name

n Get the interfaces from standard Interface MIB table

n Terminal

n Model found from show sys info should be found in models file.

n Get host name from show sys info

n Get the interfaces from show router interface



VMware, Inc. 85


n The admin display-config command is issued in the command line interface, and the file captureddirectly from the command line interface output.

n Terminal/FTP

n The startup-config (config.cfg) or boot-options-file (bof.cg) is copied using FTP.

n Terminal/SCP

n The startup-config (config.cfg) or boot-options-file (bof.cg) is copied using SCP



n Terminal/FTP

n The startup-config (config.cfg) or boot-options-file (bof.cg) is copied to the device using FTP.

n Terminal/SCP

n The startup-config (config.cfg) or boot-options-file (bof.cg) is copied to the device using SCP


n system security no user <oldUser>

n system security user <username>

n password

n access console ftp snmp

n console member administrative

n SNMP

n system security snmp no community <oldSnmpCommunity>

n system security snmp community <newSnmpCommunity> (r | rw) version both

Operating Systemn file dir <filepath>

n file md <dirName>

n file copy <fromPath> <toPath>


VMware, Inc. 86

n file delete <filename>

n bof primary-image <newImgPath>

n bof save

n admin reboot upgrade


n traceroute

n environment no more

n environment more

n exit all

n configure

n admin save

n exec

n show system memory-pools

n show port

n show system info

n show chassis

n show router interface



running-config Yes Yes Save ASCII TELNET, SSH

startup-config Yes Yes Reboot,Load ASCII TELNET/FTP,SSH/FTP,

SSH/SCP

boot-options Yes Yes Reboot,Load ASCII TELNET/FTP,SSH/FTP,

SSH/SCP



VMware, Inc. 87


ARP Table No Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes No


OSPF Settings No No


Routes No No



VLANs No No


Alcatel Service Router and Ethernet Service Switch

n The serial number can not be obtained using SNMP. A serial number of Unknown will be displayed ifthe correct account credentials are not supplied.

n A user cannot delete their own account due to device limititations.

n Any attempt to roll credentials to a new user account will leave the existing account in place. Theaccount must be deleted using a configlet or cut-through to the device. Attempts to roll user namesmay result in a warning with the message: CLI Users cannot delete themselves. Old user name mustbe removed manually.

n OS upgrade:

n Standard upgrade is supported

n In-Service upgrade and AA Signature upgrades are not supported.

n Service Router upgrade capability is unverified.


VMware, Inc. 88

n The operating system repository must use a path for the images, since the files themselves donot have versioning information in the names. The path must be only one level deep. Support forcreating nested directories on the supported devices has not been implemented.

n It is advisable that the operating system version be used for the directory in which the imagesreside, since this is used for the device image directory and the primary-image boot optionsetting.

n If only one set of images is present in the repository, and no path is specified, the nameSW_UPGRADE will be used.

n The upgrade fails in the scheduler if the following conditions are not present:

n The boot.ldr file must be part of the selected images.

n For a one-slot chassis, the both.tim file must be included along with the boot loader.

n For a redundant SFM/CPM device, both CPM and IOM image files must be included alongwith the boot loader.

Alcatel EFMDevice Type Switch

Specific Model(s) Alcatel EFM

Operating System and Firmware Versions 1.7.456







Quick Commands

Ping, Traceroute, Setup Diagnostic, View Diagnostic Setup, Setup NAT, ViewNAT Setup, View Diagnostic,Route,ARP,

Interfaces

Features available


Auto-Discovery Yes



Configlets Yes




VMware, Inc. 89




SNMP Traps No

Syslog No

Rollback No

Quick Commands Yes




n SNMP

n sysObjectID value contains .8550.1.1.1.3

n Terminal

n Output of “show system” contains model name and serial number.

n Output of “show system” contains hostname of the device.








n Create user <username> privilge <level>

n delete user <oldUser>


VMware, Inc. 90

n SNMP

n config snmp community<oldSNMPcommunity> communityString <newSnmpCommunity>

n config snmp community <newSnmpCommunity> privilege readOnly

Operating System Managementn dir swImage *

n clear swImage < filename>

n show memory

n copy swImage protocol ftp server <upgradeLoc> imageFile <imageFilename> loginId <upgradeUser>


n ping

n traceroute



n show arp

n show route

n saveRunning

n reboot



running-config Yes Yes Copy to Startup TEXT TELNET, SSH

startup-config No Yes Reboot,Load TEXT TELNET, SSH



ARP Table No Yes



VMware, Inc. 91


CAM Table No No


Identity Yes Yes

Interfaces No Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No Yes



VLANs No No

Known issuesAlcatel EFM does not support PUSH opertaion to push existing configurations changes through Configmode.

Alcatel EFM 1531Device Type Switch

Specific Model(s) 1531 CLAS, 1532 CLAS








Quick CommandsPing, Traceroute, Setup Diagnostic, View Diagnostic Setup, Setup NAT, ViewNAT Setup, View Diagnostic,ARP


VMware, Inc. 92

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

Syslog No

Rollback No

Quick Commands Yes




n SNMP

n sysObjectID value contains .8550.1.1.1.5

n Terminal

n Output of “show system” contains model name and serial number.

n Output of “show system” contains hostname of the device.






VMware, Inc. 93




n Create user <username> privilge <level>

n delete user <oldUser>

n SNMP

n config snmp community<oldSNMPcommunity> communityString <newSnmpCommunity>

n config snmp community <newSnmpCommunity> privilege readOnly


n ping

n traceroute



n show arp

n saveRunning

n reboot



running-config Yes Yes Copy to Startup TEXT TELNET, SSH

startup-config Yes Yes Reboot TEXT TELNET, SSH



VMware, Inc. 94


ARP Table No Yes


CAM Table No No


Identity Yes Yes

Interfaces No Yes

Keys No No

Memory No No


OSPF Settings No No




VLANs No No


VMware, Inc. 95

Alvarion Devices 12This chapter contains the following topic:

n Alvarion Breeze AP

Alvarion Breeze APDevice Type Wireless AP

Specific Model(s) BreezeACCESS SU-A/E-BD


Communication Protocols TELNET






Quick Commands Resync

Features available


Auto-Discovery Yes



Configlets No





SNMP Traps No

Syslog No

VMware, Inc. 96


Rollback Yes

Quick Commands Yes




n SNMP

n sysName OID

n sysServices: bit 3 set

n brzAccUnitType (from Breeze-Access-MIB)



n Selecting menu option (Main > Info > Advanced Configuration)


n Not Supported


n Selecting menu option (2->4->3)


n traceroute



VMware, Inc. 97


running No Yes NA ASCII TELNET



ARP Table No No


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory No Yes


OSPF Settings No No


Routes No No



VLANs No No


Alvarion Wireless Access Point

n Incorrect password specification leaves the login screen in an unusable state. If this occurs, the usermust manually login to the device and clear the prompt.

n SNMP credentials are mapped to user accounts; the corresponding read/write SNMP communitychange must be saved (not pushed) in the UI prior to initiating the corresponding admin credentialroll.

n Device settings are distributed among several menus. The driver displays their contents, but theresults cannot be pushed.


VMware, Inc. 98

APC Devices 13This chapter contains the following topic:

n APC Power Strips

APC Power StripsDevice Type Power Strips

Specific Model(s) AP7866A, AP7941

Operating System and Firmware Versions V3.7.3

Communication Protocols SSH/Telnet, SNMP






Quick Commands Not available

Features available


Auto-Discovery Yes



Configlets No





SNMP Traps No

Syslog Yes

VMware, Inc. 99


Rollback No

Quick Commands No




n SNMP

n sysObjectID value contains . 1.3.6.1.4.1.318.1.3.4.5

n Chassis serial Number .1.3.6.1.4.1.318.1.1.4.1.5.0

n Terminal

n For Model and chassis serial number through term, go to System Menu and then move to AboutSystem Menu.

n Host name is present when first logged in to the device.


Configuration capturen FTP

n Running Configuration

n Pull running config via ftp . Credentials of ftp should be same as user creds for device.

n TFTP

n Using CLI, tftp config can be pulled.

Configuration deployn FTP

n Push running config through FTP. Credentials of FTP should be same as user credentials fordevice.


VMware, Inc. 100


n Device has two users – admin and local. Account credential roll will always change the local useraccount details as admin credentials cannot be rolled into.

Go to System Menu > User Manager Menu > Device Manager User.

Type the admin password, change the device manager user details and then commit.

n SNMP Credential

n In the menu, go to Network >SNMP > SNMP V1 specific settings. Then change the SNMP V1Access control status to Committed.



running Yes Yes No TEXT SSH/FTP,Telnet/FTP,SSH/TFTP(Pull),Telnet/TFTP(Pull).



ARP Table No Yes


CAM Table No No


Identity Yes Yes

Interfaces No Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No Yes



VMware, Inc. 101



VLANs No No

Known issuesThe following details existing device issues that have been discovered with other releases. A resolution isincluded to address the issue, if available.

n Account credential roll will always change the local user account details as admin creds cannot berolled into.So for these devices, rolling of account credential will be from admin to a new device usercredential. Implicitly, this will roll the old device user to new device user. These devices alwaysrequire admin credentials for rolling device credentials.

n TFTP has not been tested.


VMware, Inc. 102

Arista Devices 14This chapter contains the following topic:

n Arista 7000

Arista 7000Device Type Switch

Specific Model(s)

DCS-7050Q-16-R, DCS-7050T-36-F, DCS-7050T-52-F, DCS-7048T-A-R,DCS-7050T-64-R, DCS-7050S-52-F, DCS-7050S-64-R, DCS-7150S-52-CL,DCS-7150S-64-CL, DCS-7150S-64-CL-F

Operating System and Firmware Versions 4.9.5, 4.10.2, 4.11.3, 4.12.0







Quick CommandsPing, Trace route, Setup Diagnostic, View Diagnostic Setup, Setup NAT, ViewNAT Setup, View Diagnostic, ARP, Interfaces

Features available


Auto-Discovery Yes



Configlets Yes





VMware, Inc. 103


SNMP Traps Yes

Syslog Yes

Rollback No

Quick Commands Yes




n SNMP

n sysObjectID contains .30065.1.3011, .1.3.6.1.4.1.30065.1.3011.7050.427.52, .1.3.6.1.4.1.30065.1.3011.7048.427.3648, .1.3.6.1.4.1.30065.1.3011.7050.427.64, .1.3.6.1.4.1.30065.1.3011.7050.3282.52, .1.3.6.1.4.1.30065.1.3011.7050.3282.64, .1.3.6.1.4.1.30065.1.3011.7150.3282.52.2745, .1.3.6.1.4.1.30065.1.3011.7050.2512.16

n Terminal:

n Output of "show version" contains model name and serial number.

n Output of "show version" contains hostname of the device.





n Terminal/TFTP






VMware, Inc. 104


n username <user> privilege 15 secret <password>

n no username <user> privilege 15 secret <password>

n SNMP

n snmp-server community <newCommunity> ro

n snmp-server community <newCommunity> rw



n ping

n traceroute




n reload now



running Yes Yes Copy to Start TEXT SSH, Telnet

startup Yes Yes Reboot TEXT SSH, Telnet



ARP Table No Yes


CAM Table No No



VMware, Inc. 105


Identity Yes Yes

Interfaces No Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No Yes



VLANs No No


VMware, Inc. 106

Aruba Devices 15This chapter contains the following topic:

n Aruba Wireless Switch

Aruba Wireless SwitchDevice Type Wireless AP

Specific Model(s)

a52, a50, a800, a2400, a5000,a6000,a620,a650,a3200,a3400,a7030,a105,a115, a7210, a7220, a7005,a7010,a335









Features available


Auto-Discovery Yes



Configlets Yes





VMware, Inc. 107


SNMP Traps Yes

Syslog Yes

Rollback No

Quick Commands Yes




n SNMP

n sysObjectID contains 1.3.6.1.4.1.14823 or 1.3.6.1.4.1.6486.800.1.1.2.2.2.1.1.4



n show startup

n show run

n Terminal/TFTP





n Terminal/TFTP

n copy tftp <serverIPAddress> <filename> startup-config

n copy tftp <serverIPAddress> <filename> running-config


n mgmt-user <username> root


VMware, Inc. 108

n Privilege Account

n enable secret

n SNMP

n no snmp-server community <oldSnmpROCommunity>

n snmp-server community <newSnmpROCommunity>

Device monitoringn no paging

n exit

n write mem

n show memory

n show version

n show inventory

n show storage







ARP Table No Yes


CAM Table No No


Identity No Yes

Interfaces No Yes


VMware, Inc. 109


Keys No No

Memory Yes Yes


OSPF Settings No No


Routes No Yes



VLANs No No


VMware, Inc. 110

AudioCodes Devices 16This chapter contains the following topics:

n AudioCodes MediaPack

AudioCodes MediaPackDevice Type Content Cache

Specific Model(s) MP-118FXS








Quick Commands Ping, View Routes, View Interfaces

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

VMware, Inc. 111


Rollback Yes

Quick Commands Yes




n SNMP

n sysObjectID contains 1.3.6.1.4.1.5003.8.1.1

n Terminal

n Model found from /conf/cf get should be found in the Models file



n /conf/cf get command is issued in the command-line interface.

n The file is captured directly from the command-line interface output.


n Full Configuration

n A command-line interface session is started and the command /conf/cf set is entered.

n The system waits for the Type a . on an empty line prompt.

n The config is sent to the command-line interface session all at once followed by a period onan empty line.

n The system waits for the INI file replaced message.

n By default, following a successful push, the command /conf/sar is sent to the device to savethe changes and reload the system. This can be disabled when the job is scheduled.

n Configlet

n A command-line interface session is started. Each line of the configlet is sent, one by one,preceded by the text conf/scp.


VMware, Inc. 112

n The responses are monitored for any error messages, and the job is stopped if an error isencountered.

n Following a successful push, the command /conf/sar is sent to the device to save thechanges and reload the system. This default setting can be disabled when the job isscheduled


n /conf/chun " <username>

n /conf/chpw <oldPass> <newPass>

n SNMP

n /conf/scp (SNMPREADWRITECOMMUNITYSTRING_1 |SNMPREADONLYCOMMUNITYSTRING_1) <newSnmpCommunity>

Device monitoringn /conf/cf get

n show ip conf

n show ip route

n /conf/cf get

n ping

n show arp

n traceroute

n show ip interface detail 5



running Yes Yes Save andReboot

ASCII TELNET, SSH



VMware, Inc. 113


ARP Table No No


CAM Table No No


Identity Yes No

Interfaces Yes No

Keys No No

Memory Yes No


OSPF Settings No No


Routes Yes Yes



VLANs No No


AudioCodes MediaPack

n Full configs MUST use the INI file format.

n Configlets may be in either INI file format (parameter=value) or SetConfigParam format (parametervalue). Do not include the /conf/scp command in configlet lines.

n If credential roll is used to add or change community strings, the new string will always be stored instring one.


VMware, Inc. 114

Avocent Devices 17This chapter contains the following topics:

n Avocent ACS

Avocent ACSDevice Type Switch

Specific Model(s) ACS6032, Cyclades ACS 6000


Communication Protocols TELNET, SSH,SNMP



Discovery/Identify Methods Terminal, SNMP

Credential Management Account, Privilege Account, SNMP v1/v2


Quick Commands Ping, Traceroute, Routes

Features available


Auto-Discovery Yes



Configlets No





SNMP Traps Yes

Syslog Yes

VMware, Inc. 115


Rollback No

Quick Commands Yes




n SNMP

n sysObjectId contains 1.3.6.1.4.1.10418

n Terminal

n show system/information/ command output should have "type:"



n list_configuration

Device monitoringn show system/usage/memory/

n show system/usage/flash_usage/

n show system/information/

n show network/settings/

n show network/ipv4_static_routes/



running No Yes NA ASCII TELNET, SSH


VMware, Inc. 116



ARP Table No Yes


CAM Table No No


Identity Yes Yes

Interfaces No Yes

Keys No No

Memory Yes No


OSPF Settings No No

Physical Hardware Yes Yes

Routes No Yes



VLANs No No


VMware, Inc. 117

Bigswitch Devices 18This chapter includes the following topics:

n Bigswitch Controller

n Bigswitch Switch

Bigswitch ControllerDevice Type Switch

Specific Model(s) BIGTAPCONTROLLER

Operating System and Firmware Versions Big Tap Controller 5.0.0(0006-b.bsc.bt-5.0.0)

Communication Protocols TELNET, SSH,TELNET/FTP,SSH/FTP,SNMP



Discovery/Identify Methods SNMP/Term

Credential Management Not Available


Quick Commands Ping, Interfaces ,Routes, Traceroute,Arp

Features available


Auto-Discovery Yes



Configlets Yes

Credential Management No




VMware, Inc. 118


SNMP Traps Yes

Syslog Yes

Rollback No

Quick Commands Yes




n SNMP


n sysDescr contains "Big Tap Controller" or "Big Switch Controller"

n Terminal

n show controller-node includes hostname

n show version includes model and OS version

n show environment includes serial number of device





n Terminal/TFTP

n copy running-config tftp://$SERVERIPADDRESS$/$LOCALFILE$"

n copy startup-config tftp://$SERVERIPADDRESS$/$LOCALFILE$"

Configuration deploysn Terminal/FTP

n copy ftp://$SERVERIPADDR$/$REMOTEFILE$ running-config

n copy ftp://$SERVERIPADDR$/$REMOTEFILE$ startup-config



VMware, Inc. 119


n traceroute

n show interfaces



running Yes Yes copyToStart ASCII SSH,SSH/FTP,TELNET,TELNET/FTP

startup Yes Yes copyToStart ASCII SSH,SSH/FTP,TELNET,TELNET/FTP



ARP Table No Yes


CAM Table No No


Identity Yes Yes

Interfaces No Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No Yes



VLANs No No


VMware, Inc. 120

Bigswitch SwitchDevice Type Switch

Specific Model(s) AS5710-54X

Operating System and Firmware Versions Switch Light OS SWL-BT-5.0.0

Communication ProtocolsSSH, SSH/TFTP, SSH/FTP,SSH/SCP,TELNET,TELNET/TFTP,TELNET/FTP,SNMP




Credential Management SNMP v1/v2,TERMINAL


Quick Commands Ping, Interfaces ,Routes,Traceroute,Arp

Features available


Auto-Discovery Yes



Configlets No





SNMP Traps Yes

Syslog Yes

Rollback No

Quick Commands Yes




n SNMP



VMware, Inc. 121

n sysDescr contains "Switch Light OS"

n Terminal

n show tech-support includes hostname

n show version includes model, OS version and serial number





n Terminal/TFTP

n copy running-config tftp://$SERVERIPADDRESS$/$LOCALFILE$"

n copy startup-config tftp://$SERVERIPADDRESS$/$LOCALFILE$"


n copy ftp://$SERVERIPADDR$/$REMOTEFILE$ running-config

n copy ftp://$SERVERIPADDR$/$REMOTEFILE$ startup-config



n traceroute

n show interfaces



VMware, Inc. 122


running Yes Yes copyToStart ASCII SSH,SSH/TFTP,TELNET,TELNET/TFTP,FTP

startup Yes Yes copyToStart ASCII SSH,SSH/TFTP,TELNET,TELNET/TFTP,FTP



ARP Table No Yes


CAM Table No No


Identity Yes Yes

Interfaces No Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No Yes



VLANs No No


VMware, Inc. 123

Blade Networks Devices 19This chapter contains the following topic:

n Blade Networks G8000 Switch

Blade Networks G8000 SwitchDevice Type Switch

Specific Model(s) G8000








Quick Commands Ping, Traceroute, View Routes, View Interfaces, Resync

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

Syslog No

VMware, Inc. 124


Rollback Yes

Quick Commands Yes




n SNMP

n sysDescr value contains “RackSwitch G8000” (case-insensitive)


n Terminal

n Model found from show sys-info should be found in the Models file



n The command show (running|active|backup)-config is issued in the command-line interface andthe output is captured.

n Terminal/TFTP

n The command copy (running|active|backup)-config tftp://<serverip>/<filename> is issued in thecommand-line interface to transfer the file to the device server.


n A command-line interface session is started and brought to configuration mode.


n Terminal/TFTP

n The command copy tftp://<serverip>/<filename> (running|active|backup)-config is issued in thecommand-line interface, to transfer the config from the device server directly to the selectedconfiguration.



VMware, Inc. 125


n access user (user-password | operator-password | adminstrator-password)

n no access user <oldUserNum> enable

n access user <enableUser> name <username>

n access user <enableUser> level admin

n access user <enableUser> password <password>

n access user <enableUser> enable

n no access user <disableUser> enable

n SNMP

n snmp-server (write-community | read-community) <newSnmpCommunity>

Device monitoringn terminal length <value>

n enable

n disable


n show snmp

n show sys-info

n show ip route

n show system memory

n show boot

n console-log

n ping

n traceroute

n show interface info

n show interface link

n show interface portchan info

n show interface portchan link


VMware, Inc. 126



running Yes Yes Copy To Start ASCII TELNET, SSH,TELNET/TFTP,SSH/TFTP

active Yes Yes Reboot ASCII TELNET, SSH,TELNET/TFTP,SSH/TFTP

backup Yes Yes N.A ASCII TELNET, SSH,TELNET/TFTP,SSH/TFTP



ARP Table No No


CAM Table No No


Identity Yes Yes

Interfaces Yes No

Keys No No

Memory Yes Yes


OSPF Settings No No


Routes Yes No



VLANs No No


VMware, Inc. 127


Blade Networks G8000 Switch

n When sending a config line by line using Telnet or SSH, sending an ip-mgmt interface addresscommand causes the immediate dropping of the terminal session. Therefore ,the driver willintentionally filter out any configuration line that starts with ip-mgmt interface address when sending inline by line mode.

n The Blade Networks G8000 Switch only supports a total of ten user accounts. When rollingusernames and passwords, if the new user does not already exist, the driver will attempt to re-use theold user account if it exists. If the old user account does not exist, the driver will look for one availableuser account out of the possible ten. If there are no available user accounts, no changes will be madeand the job will fail.

n The Blade Networks G8000 Switch has console logging enabled by default and will send consolemessages during the login procedure, which is not a best practice. It is advisable to permanently turnoff console logging on any Blade Networks G8000 Switches that will be managed by this application.During testing of this driver, the driver always managed to login despite these messages, but themessages slow down the login procedure dramatically. For best performance, turn off console loggingpermanently using the following commands:

configure terminal

no logging console

end

save running-config startup-config


VMware, Inc. 128

BlueCoat Devices 20This chapter includes the following topics:

n BlueCoat SG

n BlueCoat PacketShaper

BlueCoat SGDevice Type Content Cache

Specific Model(s)

SG 100, SG 1000, SG 500, SG 2000, SG 5000, SG 500A, SG 3000, SG 5X5,SG 110, SG 600, SG 6000, SG 610, SG 6X5, SG 3000S, SG 5000S, SG 7X5,SG 710, SG 7000, SG 611, SG 800, SG 400, SG 8000, SG 200, SG 810, SG210, SG 510, SG 8100, SG S500-20








Quick Commands Ping, Traceroute, View Arp, View Interfaces, View Routes

Features available


Auto-Discovery Yes



Configlets Yes



VMware, Inc. 129




SNMP Traps No

Syslog No

Rollback Yes

Quick Commands Yes




n SNMP

n sysObjectId contains 1.3.6.1.4.1.3417.1.1

n sysDesc contains “Blue Coat SG”

n Map the sysObjectId to model in BlueCoatSGModels.xml



n show configuration expanded noprompts

n Terminal/TFTP

n archive-configuration protocol tftp

n archive-configuration host <SERVERIPADDR>

n archive-configuration path

n archive-configuration filename-prefix <fileName>

n upload configuration




VMware, Inc. 130

n Terminal/TFTP

n configure network tftp <SERVERIPADDR> <fileName>


n security user <username>

n security password <password>

n Privilege Account

n security enable-password <newPrivPass>

n SNMP

n snmp

n enable

n read-community <newString>

n write-community <newString>


n traceroute

n disable


n exit

n show interface all

n show ip-route-table

n show arp-table



running Yes Yes NA ASCII TELNET, SSH,TELNET/TFTP,SSH/TFTP


VMware, Inc. 131



ARP Table No No


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No No



VLANs No No


BlueCoat SG

n No volatile or non-volatile storage information is available using SNMP for this device class.

n Account password rolls are performed on a device-wide account. Content is the responsibility of theuser.

n Configuration pushes using terminal protocols (Telnet/SSH) may experience timeout problems whencontent includes nested inline commands. The first occurrence of end-*-inline causes the driver toexpect a command prompt. This does not occur when TFTP is used for configuration management.

For example:

inline exceptions end-383770416-inline

additional content...

inline exceptions end-383770416-inline



VMware, Inc. 132

)

end-383770416-inline


)

end-383770416-inline

BlueCoat PacketShaperDevice Type PacketShaper

Specific Model(s) 12000/ISP, S400,S200

Operating System and FirmwareVersions v9.2.11g1

Communication Protocols TELNET, SSH, SNMP



Discovery/Identify Methods SNMP,SSH

Credential Management SNMP v1/v2, Terminal


Quick Commands Ping, Arp, Interfaces, Routes

Features available


Auto-Discovery Yes



Configlets No





SNMP Traps No

Syslog No

Rollback No

Quick Commands Yes




VMware, Inc. 133


n SNMP

n sysObjectId contains 1.3.6.1.4.1.2334.1.1



n setup capture complete config.cmd

n cat cmd/config.cmd


n show interface status



ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces No Yes

Keys No No

Memory Yes No


OSPF Settings No No


Routes Yes Yes



VMware, Inc. 134



VLANs No No


VMware, Inc. 135

Brocade Devices 21This chapter includes the following topics:

n Brocade 7500

n Brocade McData

n Brocade MLX

n Brocade FCX

n Brocade FOS

n Brocade VDX

n Brocade TurboIron

Brocade 7500Device Type Switch










Features available


Auto-Discovery Yes


VMware, Inc. 136



Configlets Yes





SNMP Traps No

Syslog No

Rollback Yes

Quick Commands Yes




n SNMP

n sysObjectId contains 1.3.6.1.4.1.1588.2.1.1.1



n configShow




n passwd

n passwd admin

n userConfig --add <username> -r Admin -h 0 -a 0-255


VMware, Inc. 137

n userConfig --delete <oldUser>

n SNMP

n snmpConfig --show snmpv1

n snmpConfig --set snmpv1

Device monitoringn switchShow

n configShow



running Yes Yes NA ASCII TELNET, SSH



ARP Table No No


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No No



VLANs No No


VMware, Inc. 138


Brocade 7500 Router

n Configurations cannot be pushed in this version of the driver. The configuration displayed in responseto showConfig from the command line interface does not have the same form as the commands usedto configure the device.

n Although configuration files can be pushed and pulled by the device acting as a client using FTP/SCP,the necessary credential and server support is not implemented.

n No volatile or non-volatile storage information is available using SNMP for this device class.

Brocade McDataDevice Type Switch

Specific Model(s)ED-10000M, 010000, ED-6140, ED-6064, SAN140M, 006140, 006064,004500

Operating System and Firmware Versions 9.6.1.5, 9.2.0.8, 09.02.01, 05.01.00








Features available


Auto-Discovery Yes



Configlets No






VMware, Inc. 139


SNMP Traps No

Syslog No

Rollback No

Quick Commands Yes




n SNMP

n sysObjectID contains 1.3.6.1.4.1.289.2.1.1.2 or 1.3.6.1.4.1.289.2.2.1.2.2

n sysDescr contains “Fibre Channel”

n Terminal

n sysDescr and sysObjectId is found via terminal

n sysObjectID contains 1.3.6.1.4.1.289.2.1.1.2 or 1.3.6.1.4.1.289.2.2.1.2.2

n sysDescr contains “Fibre Channel”



n This device class uses a set of configurable commands in the [ProductHome]/package/pkgxml/McData/McDataDeviceCommands.xml file for displaying various settingsin a user-defined order.

n The comments in the above file include directions on changing this order, adding future modelcommand support as software versions, and new supported products in the family.


n Termlet push is supported

Credential managementn Not supported


VMware, Inc. 140

Device monitoringn show ip Ethernet

n show system

n show switch

n show opensysm config

n show port config

n show snmp config

n show port status

n show port info

n show port technology

n show loginserver

n show features

n show security portbinding

n show security switchbinding

n show security fabricbinding

n show opentrunking config

n show thresholdalerts alerts

n show fabric topology

n show security switchacl

n show fencing policies

n show activealias

n system show

n show all

n system ip

n show frus

n system fru



VMware, Inc. 141





ARP Table No No


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No No



VLANs No No

Known issuesThe following details existing device issues that have been discovered with other releases.

Brocade McData

n Memory and flash are not available from SNMP or command line interface access.

n The device type number is used in place of the model for both SNMP and Terminal access, as somemodels only report "-" for the model number in the results of show system.

n Some hardware detail lines show partial part numbers in the command line interface which arereported verbatim.

n A test using 10000 devices and running OS version 9.2.0.8 has exhibited the following behavior:

n The device does not appear to support system show at operator level access. In this case, noconfiguration will be shown.

n IP-related details do not appear to be available from SNMP.


VMware, Inc. 142

Brocade MLXDevice Type Router

Specific Model(s) NetIronMLX

Operating System and Firmware Versions 5.0.0T165







Quick Commands Ping

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes




n SNMP

n sysDescr value contains “MLX”


VMware, Inc. 143


n Terminal

n show version should contain "Brocade Communications" and “MLX”



n show configuration

n show run

n Terminal/TFTP

n copy start tftp <SERVERIPADDR> <fileName>

n copy run tftp <SERVERIPADDR> <fileName>



n Terminal/TFTP

n copy tftp running-config <SERVERIPADDR> <fileName>

n copy tftp startup-config <SERVERIPADDR> <fileName>


n show run

n enable telnet password <password>

n no aaa authentication login default


n enable telnet authentication


n aaa authentication login default local

n Privilege Account

n show run


VMware, Inc. 144

n enable super-user-password <newPrivPass>

n no enable super-user-password <newPrivPass>

n SNMP

n snmp-server community <newCommunity> (RO | RW)

n no snmp-server community <oldCommunity> (RO | RW)

Device Monitoringn write mem

n enable

n disable

n exit

n terminal length 0

n show version

n show module

n show chassis

n show snmp server

n show memory

n show flash

n ping

n show ip route

n show arp

n show interfaces

n reload

n show run

n skip-page



VMware, Inc. 145



Startup Yes Yes Reboot ASCII TELNET, SSH,TELNET/TFTP,SSH/TFTP



ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes No


OSPF Settings No No


Routes Yes No



VLANs No No


n During push, the process should not be interrupted as the device may be permanently damaged.

n In SNMP credential operation, the RO/RW credential validation may fail due to a timing issue; thiscannot be addressed at driver level.

n The password credential roll is dependent on the device configuration. If a username is supplied in anaccount credential roll job, the local account is changed, otherwise the line credential is changed.

n In non-volatile memory, only total memory is reported.


VMware, Inc. 146

n If there is no data in a specific OID, then reading of this object will report an error.

n Configuration pushes may fail due to the absence of appropriate exit commands from configurationsub-modes in the content, which is a device limitation. It is the user’s responsibility to edit theconfiguration to include these before scheduling the job.

Brocade FCXDevice Type Switch

Specific Model(s) FCX, FCX 648

Operating System and Firmware Versions 07.0.01bT7f1







Quick Commands Ping

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes




VMware, Inc. 147


n SNMP

n sysDescr value contains “FCX”


n Terminal

n show version should contain "Brocade Communications" and “FCX”




n show run

n Terminal/TFTP

n copy start tftp <SERVERIPADDR> <fileName>

n copy run tftp <SERVERIPADDR> <fileName>



n Terminal/TFTP

n copy tftp running-config <SERVERIPADDR> <fileName>

n copy tftp startup-config <SERVERIPADDR> <fileName>


n show run

n enable telnet password <password>

n no aaa authentication login default



VMware, Inc. 148

n enable telnet authentication


n aaa authentication login default local

n Privilege Account

n show run

n enable super-user-password <newPrivPass>

n no enable super-user-password <newPrivPass>

n SNMP

n snmp-server community <newCommunity> (RO | RW)

n no snmp-server community <oldCommunity> (RO | RW)

Device monitoringn write mem

n enable

n disable

n exit

n terminal length 0

n show version

n show module

n show chassis

n show snmp server

n show memory

n show flash

n ping

n show ip route

n show arp

n show interfaces

n reload

n show run

n skip-page


VMware, Inc. 149







ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes No


OSPF Settings No No


Routes Yes No



VLANs No No

Known IssuesThe following details existing device issues that have been discovered with other releases. A resolution isincluded to address the issue, if available.

n During push, the process should not be interrupted as the device may be permanently damaged.


VMware, Inc. 150

n In SNMP credential operation, the RO/RW credential validation may fail due to a timing issue; thiscannot be addressed at driver level.

n The password credential roll is dependent on the device configuration.

n In non-volatile memory, only total memory is reported.

n If there is no data in a specific OID, then reading of this object will report an error.

n Based on the configuration data and the configuration level at which the command is issued, thedevice may signal an error while trying to push configuration to the device. On such an occurrence,the driver detects the failure and aborts pushing of configuration any further.

Brocade FOSDevice Type Switch

Specific Model(s) 8000, BROCADE VA-40FC, BROCADE 200E

Operating System and Firmware Versions v7.0.1, v6.2.1_vfc, v6.2.2c

Communication Protocols SSH/Telnet,TELNET/FTP,SSH/FTP,SSH/SCP






Quick CommandsPing, Traceroute, Setup Diagnostic, View Diagnostic Setup, Setup NAT, ViewNAT Setup, View Diagnostic, ARP, Routes, Interface

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

Syslog No

Rollback No

Quick Commands Yes


VMware, Inc. 151





n SNMP

n sysObjectID contains .1588.2.1.1

n Terminal

n Output of "switchShow" contains model name and serial number.

n Output of "wwn -sn" contains hostname of the device.

n Output of "version" contains the software version.



n configShow -all

n SCP

n configUpload -all -p scp <SERVERIPADDR>,<USER>,<LOCALFILE>

n FTP

n configUpload -all -p ftp <SERVERIPADDR>,<USER>,<LOCALFILE>,<PASSWORD>



n SCP

n configDownload -all -p scp <SERVERIPADDR>,<USER>,<REMOTEFILE>

n FTP

n configDownload -all -p ftp <SERVERIPADDR>,<USER>,<REMOTEFILE>,<PASSWORD>


VMware, Inc. 152


n userConfig --add <user> -r admin <password>

n userConfig --delete <user>

Device monitoringn switchShow

n version

n wwn -sn

n ping

n traceroute

n configShow -all

n interfaceShow

n reboot



running Yes Yes No TEXT SSH,Telnet,FTP,SCP



ARP Table No Yes


CAM Table No No


Identity Yes Yes

Interfaces No Yes

Keys No No

Memory No No


VMware, Inc. 153



OSPF Settings No No


Routes No Yes



VLANs No No

Brocade VDXDevice Type Switch

Specific Model(s)

Brocade VDX Switch(switchType96),BROCADEVDX8770-4,BROCADEVDX8770-8,BROCADEVDX6740,BROCADEVDX6740T,BROCADEVDX6940,BROCADEVDX6940144S


VDX Switch Model -NOS 3.0.0b

8770,6740,6940 Models - Version 6.0.2b







Quick CommandsPing, Traceroute, Setup Diagnostic, View Diagnostic Setup, Setup NAT, ViewNAT Setup, View Diagnostic, ARP, Interface

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No


VMware, Inc. 154


Syslog No

Rollback No

Quick Commands Yes




n SNMP

n sysObjectID contains .1588.2.2.1.1.1.3

n Terminal

n Output of "show chassis" contains model name and serial number.

n Output of "show system" contains hostname of the device.

n Output of "show version" contains the software version.








n username <user> password <password> enable true role admin

n no username <user>

n SNMP



VMware, Inc. 155



Device monitoringn Show system

n Show version

n Show chassis

n ping

n traceroute



n show interface

n show arp


n reboot







ARP Table No Yes


CAM Table No No


Identity Yes Yes

Interfaces No Yes

Keys No No


VMware, Inc. 156


Memory No No


OSPF Settings No No


Routes No Yes



VLANs No No

Brocade TurboIronDevice Type Switch

Specific Model(s) Stackable TurboIron-X24, FCX 648

Operating System and Firmware Versions 04.1.00c, 06.0.00T7f1







Quick CommandsPing, Traceroute, Setup Diagnostic, View Diagnostic Setup, Setup NAT, ViewNAT Setup, View Diagnostic, ARP, Interface

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

Syslog No


VMware, Inc. 157


Rollback No

Quick Commands Yes




n SNMP

n sysObjectID contains .1991.1.3.53.1.1 or 1.3.54.2.1.1.1

n Terminal

n Output of "show version" contains model name, serial number, version and hostname of thedevice.








n username <user> privilege 0 password <password> +username <user> enable

n no username <user>

n username <user> password <password>

n SNMP



n no snmp-server community <oldCommunity> ro


VMware, Inc. 158

n no snmp-server community <oldCommunity> rw

Device monitoringn Show version

n ping

n traceroute



n show interfaces

n show arp

n write memory

n reload







ARP Table No Yes


CAM Table No No


Identity Yes Yes

Interfaces No Yes

Keys No No

Memory No No


OSPF Settings No No



VMware, Inc. 159


Routes No Yes



VLANs No No


VMware, Inc. 160

Cambium Devices 22This chapter contains the following topics:

n Cambium Canopy

Cambium CanopyDevice Type Wireless Device

Specific Model(s) Canopy PMP450


Communication Protocols SNMP, SNMP/TFTP




Credential Management NA


Quick Commands

Route,

Ping,

Arp

Features available


Auto-Discovery Yes



Configlets No





VMware, Inc. 161


SNMP Traps No

Syslog No

Rollback No

Quick Commands Yes




n SNMP

n sysDescr(1.3.6.1.2.1.1.1) should have “CANOPY” string.


Configuration capturen SNMP/TFTP

n Snmp oid “1.3.6.1.4.1.161.19.3.3.3.8” will be set with tftp url

n Device will transfer the file to Device server(Configured as TFTP server).

Configuration deployn SNMP/TFTP

n Snmp oid “1.3.6.1.4.1.161.19.3.3.3.7” will be set with tftp url

n Device will transfer the file from Device server(Configured as TFTP server).



Device monitoringn SNMP based


VMware, Inc. 162

Multi-Config FilesThe following files are used when storing and revisioning multiple configuration files for multi-configsupport.

Multi-Config files Push Pull Post Operation Content Type Protocols

running Yes Yes N/A ASCII SNMP/TFTP



ARP Table No Yes


Identity No Yes

Interfaces No Yes

Memory No No


Routes No Yes


Known issuesThe following device issues have been discovered with this releases. A resolution is included to addressthe issue, if available.

n Device server should be configured as TFTP server.

n Reboot of device is by default enabled upon any push operation


VMware, Inc. 163

Carrier Access Devices 23This chapter contains the following topic:

n Adit 600

Adit 600Device Type Other

Specific Model(s) Adit 600


Communication Protocols SSH/Telnet,SNMP






Quick CommandsPing, Traceroute, Setup Diagnostic, View Diagnostic Setup, Setup NAT,View NAT Setup, View Diagnostic, View Routes,ARP

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

VMware, Inc. 164


Syslog No

Rollback No

Quick Commands Yes



Discovery/identify methodsThe following information must be available for this driver class to manage an applicable device:

n SNMP

n sysObjectID value contains .1.3.6.1.4.1.964

n Terminal

n Output of "show id" contains host name.

n Output of "show image" contains os version.

n Output of "print config" contains model name.

Device operationsThe following device operations must be enabled to manage an applicable device using this driver class:



n print config




n add user <user>

n set user <user> password

n delete user <user>


VMware, Inc. 165

n SNMP

n set snmp getcom <newCommunity>

n set snmp setcom <newCommunity>

Operating System Managementn NA

Device monitoringn show image

n show id

n ping

n tracert

n print config

n reset

Multi-config filesFollowing are the files used when storing and revisioning multiple configuration files for multi-configsupport:

Multi-Config Files Push Pull Post Operation Content Type Protocols

Running configuration Yes Yes No TEXT SSH, Telnet

Device dataThe following data represents device data per device class:


ARP Table No Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory No No


OSPF Settings No No



VMware, Inc. 166


Routes No Yes



VLANs No No


VMware, Inc. 167

Checkpoint Devices 24This chapter contains the following topic:

n Checkpoint Firewall-1

Checkpoint Firewall-1Device Type Firewall

Specific Model(s) FireWall-1


Communication Protocols SSH, SSH/SCP






Quick CommandsPing, Traceroute, View Routes, View Arp, View Interfaces, View ProcessorCPU, View Network Management Events, View Interface Counters

Features available


Auto-Discovery Yes



Configlets No





SNMP Traps Yes

VMware, Inc. 168


Syslog Yes

Rollback Yes

Quick Commands Yes




n SNMP

n OID 1.3.6.1.4.1.2620.1.1.10.0 contains “FireWall-1”

n sysDesc should not contain “IP530”

n Terminal

n fw ver should contain “FireWall-1”

n clish -c "show image current" should not contain “IPSONOKIA” (case insensitive)


Configuration capturen Terminal/SCP

n Use the expert command to get to a Unix prompt. Requires the super user password. All files aretransferred using SCP.

n The files listed in the Multi-Config Files section for this device are retrieved using a combination ofSSH and SCP commands.


n Use the expert command to get to a Unix prompt. Requires the super user password. All files aretransferred back using SCP.

n Use the Unix file commands to put the files back into place.

n The files listed in the Multi-Config Files section for this device are pushed using a combination ofSSH and SCP commands.


VMware, Inc. 169


n adduser <username>

n deluser <username>

n passwd

n Privilege Account

n passwd

n SNMP

n cat /etc/snmp/snmpd.users.conf | grep -v '^ ro | rw .* <oldSnmpCommunity>

n echo ro | rw user <snmpCommunity>

n echo ro | rw community <snmpCommunity>

n cp -f /tmp/snmpd.users.conf /etc/snmp/snmpd.users.conf

n service snmpd restart

Device monitoringn fw ver

n clish –c

n cat /proc/meminfo

n cpinfo | head -20 | grep FireWall"

n cpstat -f policy fw

n hostid

n hostname

n uname –a

n egrep -i '^[/s]*syslocation' /etc/snmp/snmpd.conf

n egrep -i '^[/s]*syscontact' /etc/snmp/snmpd.conf

n lspci

n ifconfig –a

n fw ctl pstat

n cpinfo

n cat /proc/cpuinfo

n fw log

n cprestart


VMware, Inc. 170

n expert

n exit

n echo



$base_dir/conf/netso.C Yes Yes NA ASCII SSH, SSH/SCP

$base_dir/conf/objects.C Yes Yes NA ASCII SSH, SSH/SCP

$base_dir/conf/InternalCA.C Yes Yes NA ASCII SSH, SSH/SCP

$base_dir/conf/snmp.C Yes Yes NA ASCII SSH, SSH/SCP

$base_dir/conf/SDS_objects.C Yes Yes NA ASCII SSH, SSH/SCP

$base_dir/conf/classes.C Yes Yes NA ASCII SSH, SSH/SCP

$base_dir/conf/lea_server_unification_scheme.C

Yes Yes NA ASCII SSH, SSH/SCP

$base_dir/conf/log_unification_scheme.C

Yes Yes NA ASCII SSH, SSH/SCP

$base_dir/conf/newobjects.C Yes Yes NA ASCII SSH, SSH/SCP

$base_dir/conf/refs.C Yes Yes NA ASCII SSH, SSH/SCP

$base_dir/conf/tables.C Yes Yes NA ASCII SSH, SSH/SCP

$base_dir/conf/userdef.C Yes Yes NA ASCII SSH, SSH/SCP

$base_dir/conf/cpha.conf Yes Yes NA ASCII SSH, SSH/SCP

$base_dir/conf/cphaprob.conf Yes Yes NA ASCII SSH, SSH/SCP

$base_dir/conf/cpmap_config.conf Yes Yes NA ASCII SSH, SSH/SCP

$base_dir/conf/cpmap_opsec.conf Yes Yes NA ASCII SSH, SSH/SCP

$base_dir/conf/cpmap_rulebase.conf Yes Yes NA ASCII SSH, SSH/SCP

$base_dir/conf/cp.lf Yes Yes NA ASCII SSH, SSH/SCP

$base_dir/conf/product.conf Yes Yes NA ASCII SSH, SSH/SCP

$base_dir/conf/fwauthd.conf Yes Yes NA ASCII SSH, SSH/SCP

$base_dir/conf/fwopsec.conf Yes Yes NA ASCII SSH, SSH/SCP

$base_dir/conf/slapd.conf Yes Yes NA ASCII SSH, SSH/SCP

$base_dir/conf/smtp.conf Yes Yes NA ASCII SSH, SSH/SCP

$base_dir/conf/omi.conf Yes Yes NA ASCII SSH, SSH/SCP

$base_dir/conf/thresholds.conf Yes Yes NA ASCII SSH, SSH/SCP

$base_dir/conf/fwmusers Yes Yes NA ASCII SSH, SSH/SCP


VMware, Inc. 171


$base_dir/conf/gui-clients Yes Yes NA ASCII SSH, SSH/SCP

$base_dir/conf/external.if Yes Yes NA ASCII SSH, SSH/SCP

$base_dir/conf/cp.license Yes Yes NA ASCII SSH, SSH/SCP

$base_dir/conf/masters Yes Yes NA ASCII SSH, SSH/SCP

$base_dir/conf/*.W Yes Yes NA ASCII SSH, SSH/SCP

/config/active Yes Yes NA ASCII SSH, SSH/SCP

$base_dir/state/* Yes Yes NA Binary SSH, SSH/SCP

$base_dir/conf/serverkeys.* Yes Yes NA Binary SSH, SSH/SCP

$base_dir/database/* Yes Yes NA Binary SSH, SSH/SCP

$base_dir/conf/fwauth.NDB Yes Yes NA Binary SSH, SSH/SCP

$base_dir/conf/fwauth.keys Yes Yes NA Binary SSH, SSH/SCP

$base_dir/conf/rulebases.fws Yes Yes NA Binary SSH, SSH/SCP

$base_dir/conf/inst.conf Yes Yes NA ASCII SSH, SSH/SCP

$base_dir/conf/sic_policy.conf Yes Yes NA ASCII SSH, SSH/SCP

$base_dir/database/cprid/cprid_keys/* Yes Yes NA Binary SSH, SSH/SCP

$base_dir/database/cprid/cprid_util_keys/*

Yes Yes NA Binary SSH, SSH/SCP



ARP Table No Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes Yes


OSPF Settings No No


Routes No Yes



VMware, Inc. 172



VLANs No No


3.6 Regression - Credentials (Account, Privilege and SNMP) change failed

n When changing Checkpoint Credentials do not change the enable password from the devicecommunications settings. This may result in the login password being modified and subsequently, youwill be denied access to the system.

Changing Checkpoint Credentials

n When changing Checkpoint credentials do not schedule a change of the enable password from thedevice communications settings. This may result in the login password being modified andsubsequent denial of access to the system.


VMware, Inc. 173

Ciena Devices 25This chapter includes the following topics:

n Ciena Router

n Ciena Switch

Ciena RouterDevice Type Router

Specific Model(s) CN4200,4200

Operating System and Firmware Versions 6.2.0,8.1.3





Credential Management SNMP v1/v2



Features available


Auto-Discovery Yes



Configlets Yes





VMware, Inc. 174


SNMP Traps No

Syslog No

Rollback No

Quick Commands Yes




n Terminal

n Vendor is Ciena in response to show system

n Serial number is retrievable

n SysObjectId

n Maps to model using CienaRouter/CienaRouterModels.xml

n Contains 1.3.6.1.4.1.7737.5.2.2.6 or 1.3.6.1.4.1.7737.5.2.2.8



n Change Log

n show log dbchg

n Terminal/FTP

n Running


n maint-state enter

n save

n maint-state exit

n copy configuration to address <SERVERIPADDR> <remoteFilename> user <FtpAccount_>overwrite yes


VMware, Inc. 175



n Terminal/FTP

n copy configuration from address <SERVERIPADDR> <remoteFilename> user <FtpAccount_>


n system

n snmp-server community <newString> (ro | rw)

n no snmp-server community <oldString>

Device monitoringn exit

n enable priv


n terminal more on

n terminal more off

n show system

n show version

n show hardware

n show snmp




running Yes Yes NA ASCII TELNET/FTP,SSH/FTP

change log No Yes NA ASCII TELNET, SSH


VMware, Inc. 176



ARP Table No No


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory No Yes


OSPF Settings No No


Routes No No



VLANs No No


Ciena Router

n The enable priv and enable admin passwords must be set to the same value to manage the device.

n Only SNMP credential rolls are supported.

n On configuration pushes (restore), the push may fail to get a verification message due to the deviceresponding with (Destination already exists). The cause for this is not yet identified.

n Change logs show a revision on every pull due to entering configuration mode in order to put thedevice into maintenance mode to save prior to transfer.

n In order to generate a configuration backup, the device is briefly placed into maintenance mode; theeffects of this on the managed device have not been investigated.

n An FTP transfer service must be configured for this device. See “Configuring FTP Transfer Service”on page 38 for more information.


VMware, Inc. 177

Ciena SwitchDevice Type Switch

Specific Model(s) CN 3920

Operating System and Firmware Versions 06-07-01-0024

Communication Protocols TELNET, TELNET/TFTP





Operating System Management Protocols TFTP, FTP

Quick Commands Ping, Traceroute, Reboot

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes




n SNMP

n sysObjectID value contains 1.3.6.1.4.1.6141


VMware, Inc. 178

n sysDescription value contains "CN"

n Terminal

n Model name, Package ID, Serial Number/Hostname will be used to identify the device

n Serial number is available through chassis show. If not, Hostname is used.



n configuration show

n Terminal/TFTP

n file tput <SERVERIPADDR> <startupFile> /flash0/config/startup-config

n configuration save filename <runningFile>

n file tput <SERVERIPADDR> <runningFile> /flash0/config/ <locaFile>



n Terminal/TFTP

n file tget <SERVERIPADDR> <remoteFile> /flash0/config/ <startupName>


n user create user <username> password <password> access-level super

n user delete user <oldUser>

n user set user <username> password <password>

n SNMP

n snmp remove(DEPRECATED) community <oldSnmpCommunity> ip 0.0.0.0

n snmp add(DEPRECATED) community <newSnmpCommunity> ip 0.0.0.0 permission (read-only |read-write)


VMware, Inc. 179

Operating Systemn OS upgrade is supported via TFTP and FTP. Before transferring the OS image, running configuration

is saved using command "configuration save filename " +FILENAME.Ciena Switch 133 CienaDevices

n Via TFTP

n software download package <IMAGENAME> server <SERVERIPADDRESS>

n Device reboots if configured

n Via FTP

n software upgrade package <IMAGENAME> server <SERVERIPADDRESS> user <USERNAME>password <PASSWORD> service-disruption allow

n Device reboots automatically

Device Monitoringn ping

n traceroute

n configuration list

n file vols

n software show

n chassis show

n file cat /mnt/apps/version

n snmp show

n system show

n system shell set more on

n system shell set more off

n arp show

n interface route show

n interface show

n port show

n reboot



VMware, Inc. 180


running Configuration Yes Yes Copy To Startup ASCII TELNET,TELNET/TFTP

startup configuration Yes Yes Reboot ASCII TELNET/TFTP



ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes No


OSPF Settings No No


Routes Yes Yes



VLANs No No


n Serial Number and OS Version are not available via SNMP.

n Physical Hardware is not available via SNMP.

n Memory and Filesystem information are not available via SNMP.

n In case of interfaces via terminal, the iftype of all the interfaces is shown as Ethernet, as thisinformation is not available.

n Cut thru to the device is not working.


VMware, Inc. 181

Cisco Devices 26This chapter includes the following topics:

n Cisco Aironet AP VXWorks

n Cisco ACS

n Cisco PIX Firewall

n Cisco VPN 3000

n Cisco Aironet AP

n Cisco Aironet Bridge

n Cisco Application Control Engine

n Cisco BPX

n Cisco CatOS Switch

n Cisco Content Appliance

n Cisco Content Services Switch

n Cisco IOS Router

n Cisco IOS Switch

n Cisco IOS XR

n Cisco Intrusion Prevention System (IPS)

n Cisco IronPort

n Cisco Lightstream

n Cisco Nexus

n Cisco MGX

n Cisco MDS

n Cisco Wide Area Application Services (WAAS)

n Cisco Wireless LAN Controller

n Cisco GSS

VMware, Inc. 182

n Cisco UCS

n Cisco SG

n Cisco 300 Series

n Cisco FirePower Cisco FirePower Cisco FirePower

n Cisco FirePower SM

n Cisco FirePower TD

n Cisco FirePower K9

n Cisco WSA

Cisco Aironet AP VXWorksDevice Type Wireless AP

Specific Model(s) CAP340, AIRAP1200


Communication Protocols Telnet, TFTP/HTTP


Configuration Change Notification (Events) Syslog, Traps





Features available


Auto-Discovery Yes



Configlets No





SNMP Traps Yes

Syslog Yes

Rollback No


VMware, Inc. 183


Quick Commands No




n SNMP

n sysDescr value contains “Cisco AP340” or “Cisco 1200 Series AP”

n sysObjectId contains “.9.1.379” or “.9.1.474”

n Term

n Not Available


Configuration capture:n SNMP : Not Available

n Terminal

n GET /cgi-bin/cgiConfigDownloadAll?detailLevel=40 HTTP/1.1"

Configuration DeployNot Available

Credential ManagementNot Available

Device MonitoringNot Applicable


Multi-config files Push PullPostOperation

ContentType Protocols

running No Yes NA ASCII TFTP/HTTP


VMware, Inc. 184



ARP Table No Yes


CAM Table No No


Identity No No

Interfaces No Yes

Keys No Yes

Memory No No

Access Control Lists Match Counts No Yes

OSPF Settings No No


Routes No Yes



VLANs No No

Known IssuesCisco Aironet AP VXWorks device does not support PUSH.

Cisco ACS

Device Type Generic

Specific Model(s) SNS-3495

Operating System and Firmware Versions Cisco ADE-OS 2.2







VMware, Inc. 185

Device Type Generic


Quick Commands show interface, show ip route, show arp, copy running-configstartup-config

Features available

Features available Support

Auto-Discovery Yes



Configlets No





SNMP Traps Yes

Syslog Yes

Rollback No

Quick Commands Yes



Discovery/identify methods

The following information must be available for this driver class to manage an applicable device:

n SNMP


n sysDescr value contains "Cisco Secure Access Control System"

Device operations

The following device operations must be enabled to manage an applicable device using this driver class:


VMware, Inc. 186


n Running configuration




Device Monitoringn show system


Multi-Config Files

Following are the files used when storing and revisioning multiple configuration files for multi-configsupport.

Multi-config files Push Pull Post Operation Content Type Protocols

Startupconfiguration

No Yes No Text SSH, Telnet

Runningconfiguration


Device data

The following data represents device data per device class.


ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes No


OSPF Settings No No



VMware, Inc. 187


Routes Yes Yes

System Properties (Serial Number, OSVersion, etc)

Yes Yes


VLANs No No

Cisco PIX FirewallDevice Type Firewall

Specific Model(s)

501, 506, 506E, 515, 515E, 520, 525, 515Esc, 515Esy, 515sc, 515sy,525sc, 525sy, 535, 535sc, 535sy, FWSM-6000, ASA5510, ASA5510-K8, ASA5520, ASA5520sc, ASA5520sy ASA5540, ASA5540sc,ASA5540sy, CiscoASASm1sc, ASA515, ASA5515-X,CiscoASA5515sc, ASA5585-10, ASA5585-20,ASA5525,ASA5555,ASA5516,ASA5525-X


Operating systems for 501 models: 6.11, 6.22, 6.24, 6.35 Operatingsystems for all other models: 6.3, 7.0, 7.2, 8.0, Cisco AdaptiveSecurity Appliance Version 9.1(1), Cisco Adaptive Security ApplianceVersion 9.1(2)

Communication Protocols Telnet, SSH, Telnet/TFTP, SSH/TFTP




Credential Management SNMP v1/v2, Account, Privilege



Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes


VMware, Inc. 188


Syslog Yes

Rollback No

Quick Commands No




n SNMP (not available for FWSM and ASA models):

n sysObjectID value contains 1.3.6.1.4.1.9, 1.3.6.1.4.1.9. 1.1421

n sysDescr value contains PIX

n Term

n show version response contains PIX, FWSM, or Adaptive Security Appliance


Configuration capturen SNMP : Not Available

n For Telnet and SSH

n running: show run (show config if show run fails)

n startup: show config (show start if show config fails)

n For Telnet/TFTP and SSH/TFTP

n running: write net ipAddress filename

n startup: same approach as startup for Telnet and SSH above

Configuration deployn via Term

n Send configuration lines one by one as device commands.

n "write mem"


VMware, Inc. 189


n snmp-server community <newROCString>

n snmp-server host inside <ip-addr> community <newROCString>

n Account

n aaa authentication telnet console LOCAL

n aaa authentication ssh console LOCAL

n aaa authentication serial console LOCAL

n no username "oldName"

n username "userName" password "password"

n no aaa authentication telnet console LOCAL

n no aaa authentication ssh console LOCAL

n no aaa authentication serial console LOCAL

n passwd "password"

n no enable password "newPrivPass" level "level"

n enable password "newPrivPass" level

n disable

n enable "level"

Device monitoringn show checksum

n show version

n show pager

n show config

n show start

n show run

n show snmp

n show snmp location

n show interface | include is

n show interface ifName

n show memory

n show memory summary


VMware, Inc. 190

n show flash

n show ip

n show arp

n show priv

n enable

n conf term

n write mem

n write net ip-addr ...

n no pager

n page 0

n term length 0

n exit

n snmp-server enable traps

n snmp-server host ip-addr

n logging history notifications

n logging on

n enable

n disable

FWSM Commands (Pix 7.0)n show host

n show mode

n show context

n change context system

n change context "contextName"




VMware, Inc. 191


runningAdmin Yes Yes copyToStart ASCII Telnet, SSH,Telnet/TFTP,SSH/TFTP

runningAdmin Yes Yes copyToStart ASCII Telnet, SSH,Telnet/TFTP,SSH/TFTP

startupAdmin Yes Yes copyToStart ASCII Telnet, SSH

startupSystem Yes Yes copyToStart ASCII Telnet, SSH



ARP Table Yes Yes

Access Control Lists Yes No

CAM Table No No


Identity Yes No

Interfaces Yes Yes

Keys Yes Yes

Memory No No

Access Control Lists Match Counts Yes No

OSPF Settings No No


Routes No Yes



VLANs No No


SNMP Credential Change for PIX 515 (version 7.0)

n When rolling Credentials (for example, using the application's System Administration -> Networks ->Roll feature), only the credential entry relating to the application's IP address changes.

Operating System Management


VMware, Inc. 192

n This device class does not currently support listing flash contents; the user must ensure sufficientspace exists before scheduling the upgrade. Upgrading from version 6.x to later versions is notsupported by this device class because memory and flash requirements cannot be verified by thedriver.

Physical Hardware

n Inventory is displayed for supported devices discovered using Non-SNMP protocols. Non-admincontexts do not have access to the processor information, so “N/A” is listed for those values.

n The system context does not support hardware inventory.

Autodiscovery of spared units

n When discovering non-admin contexts operating in a spared configuration, the newly discovered non-admin context will replace the previous version. This is due to the non-unique combination ofhostname/context, IP address, and serial number for this equipment.

n To avoid duplicate devices in the UI, devices in multi-context mode currently use hostname for theserial number to maintain backward-compatibility with previously discovered units for upgradescenarios.

Autodiscovery of Multiple Context

n Devices configured to contain multiple virtual firewall context, such as an ASA or PIX 7, must bediscovered using terminal credentials. There is not enough unique information from the SNMP agentto accurately determine a unique chassis on these devices.

Cisco PIX - SNMP Discovery

n SNMP discovery is not available for FWSM and ASA models.

Device Naming

n For devices operating in multiple context mode, the device name is constructed as hostname/context.

n Hostname is initially taken from the show host response.

n Context is taken from the show context response, active context detail is listed on the lineending in *.

n When these values are identical, the hardware name shown in the show version response isused for the hostname. For example, ciscoasa up 4 days 3 hours.

Configuration Management

n runningSystem and startupSystem configuration files can only be pulled for the admin-equivalentcontext. All other contexts will pull only runningAdmin and startupAdmin configurations.

Cisco VPN 3000Device Type VPN concentrator


Operating System and Firmware Versions 4.1.7.G, 4.7.2.L , 4.7.2.N


VMware, Inc. 193

Communication Protocols Telnet/FTP, SSH/FTP, Telnet, SSH, SSH/SCP


Configuration Change Notification (Events) Traps, Syslog




Quick Commands OSUpgrade

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes



Discovery/identify methodsThe following items are used to provide information about your device (Host Name, Type, Vendor, Model,Operating System, and Serial Number).

n SNMP

n sysObjectID contains 1.3.6.1.4.1.1.3076 or 1.3.6.1.4.1.3076

n sysDescr contains VPN

n Sys Services Layer contains 3, 4, or 7

n Term

n Not Available


VMware, Inc. 194


Configuration capturen Navigate the following menu

n Administration

n File Management

n Export XML file

n Use FTP or SCP to get the exported config file

Configuration deployn Use FTP or SCP to push the config file

n Navigate the following menu

n Administration

n File Management

n Import XML file

n Save changes to the configuration file


n Access the following menu

n Administration

n Access Rights

n Administrators

n Modify Administrators

n Set Username/Password

n Back

n Save changes to Config file

n SNMP

n Access the following menu

n Configuration

n System Management

n Management Protocols


VMware, Inc. 195

n Configure SNMP Community Strings

n Delete a Community String

n Add a Community String

n Back

n Save changes to Config file

Operating System managementn Access the following menu

n Administration

n Software Update

n Concentrator

n Reboot the device

Device Monitoringn Not Available



running Yes Yes copyToStart ASCII Telnet/FTP,SSH/FTP, Telnet,SSH, SSH/SCP

startup Yes Yes Reboot ASCII Telnet/FTP,SSH/FTP, Telnet,SSH, SSH/SCP



ARP Table No Yes


CAM Table No No


Identity Yes Yes


VMware, Inc. 196


Interfaces Yes Yes

Keys No No

Memory Yes No


OSPF Settings No No


Routes No Yes



VLANs No No


Cisco VPN 3000

n For the listed software versions, the VPN Concentrator can fail pulls and pushes if an FTP session tothe device is changed to a different directory than the default / directory.

n Push/pull failures due to the above problem can be verified with manual FTP sessions to thedevice being unable to list or transfer files. The pwd command reports the correct directory.

n The above failures will show up as failed pull or push jobs in the Scheduler, with a failedcredentials error. The credentials will succeed for a Test Credentials job.

n To correct this condition, access the device with an FTP client, login, and issue cd /. After loggingout, retry the failed operation.

Cisco Aironet APDevice Type Wireless AP

Specific Model(s) 1100, 1130, 1200, 1210, 1240, 1310, 350IOS, AIR-AP1230A-A-K9, AP1200

Operating System and Firmware Versions 12.2(13)JA, 12.3(8)JEC3

Communication Protocols SNMP/TFTP, Telnet, SSH, Telnet/TFTP, SSH/TFTP


Configuration Change Notification (Events) Trap and Syslog


Credential Management SNMP v1/v2,v3, Account, Privilege


VMware, Inc. 197


Quick Commands

View ARP

View Interfaces

View Vlans

View Logs

View CDP Neighbors

Resync

Backup OS Via TFTP

Update OS Via TFTP

Features available


Auto-Discovery Yes



Configlets Yes




SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes



Discovery/Identify MethodsThe following information must be available for this driver class to manage an applicable device.

n SNMP

n sysObjectId should be either

n 1.3.6.1.4.1.9.1.507

n 1.3.6.1.4.1.9.1.565

n 1.3.6.1.4.1.9.1.525

n 1.3.6.1.4.1.9.1.474

n 1.3.6.1.4.1.9.1.685

n 1.3.6.1.4.1.9.1.618


VMware, Inc. 198

n sysDescr should contain “IOS”

n sysServices Layer should only be 2

n Term

n Show version result should have “IOS” or “Internetwork Operating System”

n show vtp counter must be successfully executed

n Cisco Enterprise ID must match models list and not be in the list of 164, 107, 533



n Startup config: show start

n Running config: show run

n SNMP/TFTP

n Devices using OLD-CISCO-SYSTEM-MIB (running configuration only):

n .1.3.6.1.4.1.9.2.1.55.ipAdress -> remoteFilename

n Devices using CISCO-CONFIG-COPY-MIB (idx is a unique integer):

n .1.3.6.1.4.1.9.9.96.1.1.1.1.2.idx -> 1 (TFTP)

n .1.3.6.1.4.1.9.9.96.1.1.1.1.3.idx -> 1 (network file)

n .1.3.6.1.4.1.9.9.96.1.1.1.1.4.idx -> type (4: running, 3: startup)

n .1.3.6.1.4.1.9.9.96.1.1.1.1.5.idx -> serverIpAddress

n .1.3.6.1.4.1.9.9.96.1.1.1.114.idx -> 1 (start transfer)

n Terminal/TFTP



Configuration Deployn Terminal

n From the console prompts, the device is put into configuration mode using enable 15 andconfigure terminal, and if successful, the configuration is issued line-by-line with checks forbanner content and invalid input messages.

n If a banner is entered using banner motd X, the termination banner character X is stored, andthere are no prompt checks until the final banner line is entered or a new prompt is detected.


VMware, Inc. 199

n SNMP/TFTP

n Devices supporting OLD-CISCO-SYSTEM-MIB (running configuration only):

n .1.3.6.1.4.1.9.2.1.50.ipAddress -> remoteFilename

n Devices supporting CISCO-CONFIG-COPY-MIB (id is a unique integer):

n .1.3.6.1.4.1.9.9.96.1.1.1.1.2.id -> 1 (TFTP)

n .1.3.6.1.4.1.9.9.96.1.1.1.1.3.id -> type (4: running, 3: startup)

n .1.3.6.1.4.1.9.9.96.1.1.1.1.4.id -> 1 (network file)

n .1.3.6.1.4.1.9.9.96.1.1.1.1.5.id -> serverIpAddress

n .1.3.6.1.4.1.9.9.96.1.1.1.114.id -> 1 (start transfer)

Commit confign SNMP

n .1.3.6.1.4.1.9.2.1.54.0 -> 1

n Terminal


Credential managementn Check for RADIUS or TACAS, if true fail the operation

n term length 0

n sh run

n If not RADIUS or TACAS,

n term length 0

n sh run

n For non AAA user account password

n conf t

n no aaa new-model

n For type 0: line console 0

n For type 1: line aux 0

n login

n password

n exit

n For AAA user account password

n conf t


VMware, Inc. 200

n aaa new-model


n username <username> privilege <userLevel> password <password>


n exit

n For Privilege password

n conf t

n no enable secret level

n no enable password level

n enable secret level < level> <newPrivPass>


n exit

n SNMP (v1v2)

n term length 0

n show run | include community

n conf t

n snmp-server community <newSnmpCommunity> <view> <type> acl

n no snmp-server community <oldSnmpCommunity>

n exit


Device Monitoringn show version

n show module

n show diag

n term length

n term width

n show run

n show snmp user

n show snmp group

n show hosts


VMware, Inc. 201

n access-list

n archive



running Yes Yes copyToStart ASCII SNMP,Telnet,SSH, Telnet/TFTP,SSH/TFTP

startup Yes Yes copyToStart ASCII SNMP,Telnet,SSH, Telnet/TFTP,SSH/TFTP



ARP Table Yes Yes

Access Control Lists Yes Yes

CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes Yes


OSPF Settings No No


Routes No Yes



VLANs No No



VMware, Inc. 202

Cisco Aironet AP

n If the device supports CISCO-CONFIG-COPY-MIB, then SNMP/TFTP can be used to pull and pushboth the running and startup configurations, otherwise only running configurations are supported.

Cisco Aironet BridgeDevice Type Wireless Bridge

Specific Model(s) 1300,1410


Tested : 4200

Untested : 3600



Configuration Change Notification (Events) SNMP Traps, Syslog


Credential Management SNMP v1/v2,v3, Account, Privilege

Operating System Management Protocols FTP, SCP, TFTP

Quick Commands Standard

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands No




VMware, Inc. 203


n SNMP

n ciscoROMId should be valid

n sysObjectId should contain “1.3.6.1.4.1.9.1.533”

n sysDescr should contain “IOS”

n sysServices Layer should only be 2



n Startup config: show start

n Running config: show run

n SNMP/TFTP



n Devices using CISCO-CONFIG-COPY-MIB (idx is a unique integer):

n .1.3.6.1.4.1.9.9.96.1.1.1.1.2.idx -> 1 (TFTP)

n .1.3.6.1.4.1.9.9.96.1.1.1.1.3.idx -> 1 (network file)

n .1.3.6.1.4.1.9.9.96.1.1.1.1.4.idx -> type (4: running, 3: startup)

n .1.3.6.1.4.1.9.9.96.1.1.1.1.5.idx -> serverIpAddress

n .1.3.6.1.4.1.9.9.96.1.1.1.114.idx -> 1 (start transfer)

n Terminal/TFTP






VMware, Inc. 204


n SNMP/TFTP




n .1.3.6.1.4.1.9.9.96.1.1.1.1.2.id -> 1 (TFTP)


n .1.3.6.1.4.1.9.9.96.1.1.1.1.4.id -> 1 (network file)



Commit Confign SNMP

n .1.3.6.1.4.1.9.2.1.54.0 -> 1

n Terminal


Credential managementn Check for RADIUS or TACAS, if true fail the operation

n term length 0

n sh run

n If not RADIUS or TACAS

n term length 0

n sh run


n conf t

n no aaa new-model

n For type 0

n line console 0

n For type 1

n line aux 0

n login


VMware, Inc. 205

n password

n exit


n conf t

n aaa new-model


n username <username> privilege <userLevel> password <password>


n exit


n conf t

n no enable secret level

n no enable password level

n enable secret level < level> <newPrivPass>


n exit

n SNMP (v1v2)

n term length 0

n show run | include community

n conf t

n snmp-server community <newSnmpCommunity> <view> <type> acl


n exit

Operating System managementn Not Available


n show module

n show diag

n term length

n term width


VMware, Inc. 206

n show run

n show snmp user

n show snmp group

n show hosts

n access-list

n archive



running Yes Yes copyToStart ASCII SNMP,Telnet, SSH,Telnet/TFTP,SSH/TFTP

startup Yes Yes copyToStart ASCII SNMP,Telnet, SSH,Telnet/TFTP,SSH/TFTP



ARP Table Yes Yes

Access Control Lists Yes Yes

CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes Yes


OSPF Settings No No


Routes Yes Yes



VMware, Inc. 207



VLANs No No

Cisco Application Control EngineDevice Type Content Cache

Specific Model(s) ACE20-MOD-K9,ACE4710K9


Communication Protocols Telnet, SSH,Telnet/TFTP, SSH/TFTP


Configuration Change Notification (Events) Syslog and Traps

Discovery/Identify Methods SNMP, Term



Quick Commands

View ARP

View Interfaces

View Vlans

View Logs

View CDP Neighbors

Resync

Clear Cache

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes


VMware, Inc. 208





n SNMP

n sysDescription should have “Application Control Engine”

n Term

n term length 0

n show version should have “Cisco Application Control Software”

n show hardware for model no, cisco system id


Configuration capturen Term

n term length 0

n show start

n show run

n Term/TFTP

n copy startup-config tftp://<SERVERIPADDR>/<localFile.filename>

n copy running-config tftp://<SERVERIPADDR>/<localFile.filename>

Configuration deployn Term

n Send configuration as commands line by line.

n Term/TFTP

n copy tftp://<SERVERIPADDR>/<configfile> running-config

n copy tftp://<SERVERIPADDR>/<configfile> startup-config

n copyRunToStart



VMware, Inc. 209


n Configure

n username <username> password 0 <password> role Admin


n exit

n SNMP (v1/v2)

n term length 0

n config

n snmp-server community <newSnmpCommunity>


n exit


Device monitoringn show context

n term length

n show version

n show hardware

n show interface

n show inventory

n show snmp

n show arp

n show ip interface brief

n show vlan

Multi-config filesFor this device, only contexts that have their own unique management IP address are managed, andeach context is managed as a separate device. Each of those devices will store and revision the followingconfiguration files.


VMware, Inc. 210


running Yes Yes copyRunToStart ASCII Telnet,SSH,Telnet/TFTP,SSH/TFTP

startup Yes Yes Reboot ASCII Telnet,SSH,Telnet/TFTP,SSH/TFTP



ARP Table Yes No


CAM Table No No


Identity Yes Yes

Interfaces Yes No

Keys No No

Memory Yes No


OSPF Settings No No


Routes Yes No



VLANs No No

Cisco BPXDevice Type Switch

Specific Model(s) BPX 8620

Operating System and Firmware Versions NA

Communication Protocols SNMP, Telnet






VMware, Inc. 211


Quick Commands

Enable Automatic Backups

Disable Automatic Backups

Display Cards

Display Card

Display Ports

Display Port

Display Connection

Display Connections

Display Lines

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

Syslog No

Rollback No

Quick Commands Yes




n SNMP

n Model name must be mapped with the sysObjectId

n Get the serial number or sysName

n Terminal

n NA


VMware, Inc. 212



n savecnf <backupId> <nodeName> * <serverIP> <nodeName>

n dspcnf

n clrscrn

n A saved configuration file set is saved in the /tftpboot directory of the device server. Thisconfiguration set contains three files needed to restore the device configuration state. The ID ofthe save determines the name of the subdirectory containing the saved files. The ID isVC<DDD><YY> where DDD represents the 3 digit day of the year and YY is the two digit year.For example the ID for a backup on March 2nd 2008 would be VC06208. The subdirectorycontaining the configuration files for restoration is named <ID>_Cfgdir asin /tftpboot/VC06208_Cfgdir for a backup on March 2nd 2008. For example:

n -bash-3.00# ls -l /tftpboot/

n drwxr-x--- 2 nobody root 4096 Mar 3 22:59 VC06308_Cfgdir

n -bash-3.00# ls -l /tftpboot/VC06308_Cfgdir/

n total 4984

n -rw-rw-rw- 1 root root 256 Mar 3 20:14 D1.ALX1_BPX.000

n -rw-rw-rw- 1 root root 2536663 Mar 3 20:35 D1.ALX1_BPX.001

n -rw-rw-rw- 1 root root 800 Mar 3 20:14 D1.ALX1_BPX.cfg

n -rw-rw-rw- 1 root root 256 Mar 3 22:59 D1.Madi_BPX.000

n -rw-rw-rw- 1 root root 2536663 Mar 3 23:21 D1.Madi_BPX.001

n -rw-rw-rw- 1 root root 800 Mar 3 22:59 D1.Madi_BPX.cfg

Note Automatic backups will be disabled after every configuration capture.

n You can save a configuration if both of the following are true:

n No save or restore process is currently running.

n No configuration changes are in progress.

n Configuration captures for the device have an enable and disable feature. The quickcommands Disable Automatic Backups and Enable Automatic Backups are provided toprevent the server from automatically issuing the saveallcnf after every device change. It isadvisable to disable automatic backups unless the device is currently not provisioned.


VMware, Inc. 213

n SNMP

n NA


n Configuration lines can be pushed as commands one by one

n SNMP

n NA

Credential managementn NA


Device monitoringn dspcd

n dspcds

n savecnf

n clrscrn

n dspcd



running Yes Yes NA ASCII Telnet



ARP Table No No


CAM Table No No



VMware, Inc. 214


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No No



VLANs No No


Cisco BPX - Restore Causes Device Reset and Loss of Service

n Issue: Restoring the device may cause a device reset and loss of service.

n Resolution: This feature has not been implemented and should not be done until tested against anon-production system. The device server contains the necessary files to manually restore thedevice.

Cisco BPX - SNMP MIB-II shows only two interfaces

n Issue: BPX SNMP MIB-II shows only two interfaces.

n Resolution: The device SNMP agent only reports two interfaces. This is a limitation of the networkdevice.

Cisco BPX - No SSH support

n Issue: No SSH support for Cisco BPX.

n Resolution: The Cisco BPX does not support SSH.

Cisco BPX - Screen Painting and Re-drawing Issues occur when using Cut-Through

n Issue: The BPX in a split screen VT100 interface. Screen painting and redrawing issues may occurwhen using Cut-Through.

n Resolution: The clrscrn command can be used to re-draw and refresh any screen issues. Inaddition, terminal commands will show multiple snapshots of the screen progression. This informationis shown with dividers to aid in distinguishing the screen updates and associated commands.


VMware, Inc. 215

Cisco CatOS SwitchDevice Type Switch

Specific Model(s)

CAT2900XL-ATM, CAT2940, CAT2950, CAT2950LRE, CAT2955, CAT2960,CAT2970, CAT2970, CAT3550, CAT3550, CAT3560, CAT3560E, CAT3750,CAT3750, CAT3750E, CAT3750-METRO, CAT4000-AGM, CAT4000-SUP4,CAT4224, CAT4500-AGM, CAT4500-AGM, CAT4500E-SUP6E, CAT4500-SUP2-PLUS, CAT4500-SUP2-PLUS, CAT4500-SUP2-PLUS-10GE, CAT4500-SUP2-PLUS-TS, CAT4500-SUP3, CAT4500-SUP3, CAT4500-SUP4,CAT4500-SUP4, CAT4500-SUP5, CAT4500-SUP5-10GE, CAT4900M,CAT4948, CAT4948-10GE, CAT5000-ATM, CAT5000-RSFC, CAT5000-RSM,CAT5000-RSM, CAT6000-ATM, CAT6000-CMM, CAT6000-MSFC, CAT6000-MSFC2, CAT6000-MSFC2, CAT6000-MSFC2A, CAT6000-MSFC3, CAT6000-MWAM, CAT6000-SUP1/MSFC1, CAT6000-SUP1/MSFC2, CAT6000-SUP2/MSFC2, CAT6000-SUP2/MSFC2, CAT6000-SUP32/MSFC2A,CAT6000-SUP32/PISA, CAT6000-SUP720/MSFC3, CAT6000-VS-S720-10G/MSFC3, CATEXPRESS500, CATEXPRESS520, WS-C2948G-GE-TX, WS-C2948G, WS-C4507RPlusE, CAT-OS 6506


Communication Protocols SNMP/TFTP, Telnet,SSH, Telnet/TFTP, SSH/TFTP


Configuration Change Notification (Events) Syslogs and Traps


Credential Management SNMP v1/v2,V3, Account, Privilege

Operating System Management Protocols TFTP, FTP, SCP

Quick Commands

View Trunk

View CDP Neighbors

View Vlans

Clear Cache

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes


VMware, Inc. 216


Syslog Yes

Rollback Yes

Quick Commands Yes




n SNMP

n SysDescr should have “Catalyst” or “Cisco Systems WS-C5”

n sysServices should be layer 2 and not Layer 3.

n Term

n Show version should have “Cisco Systems” and not have “Internetwork Operating System” or“Cisco IOS”

n show version also should have model number which should match to the models file.



n .1.3.6.1.4.1.9.5.1.5.1.0 -> serverIpAddress

n .1.3.6.1.4.1.9.5.1.5.2.0 -> remoteFilename for configuration file

n .1.3.6.1.4.1.9.5.1.5.3.0 -> id (integer representing Supervisor module)

n .1.3.6.1.4.1.9.5.1.5.4.0 -> 3 (pull config from device)

n Term

n “set length 0”

n “show config”

n Term/TFTP

n Only for startup configuration, write <SERVERIPADDR> <local config file>


VMware, Inc. 217


n .1.3.6.1.4.1.9.5.1.5.1.0 -> serverIpAddress

n .1.3.6.1.4.1.9.5.1.5.2.0 -> remoteFilename for configuration file

n .1.3.6.1.4.1.9.5.1.5.3.0 -> id (integer representing Supervisor module)

n .1.3.6.1.4.1.9.5.1.5.4.0 -> 2 (push config from device)

n Term

n From the console prompts, the device is brought to the enable mode using enable then to theconfigure mode using conf t after which the configuration is entered line-by-line with checks forbanners and for invalid input.


n Term/TFTP

n Push to running config

n copy tftp config

n <ServerIPAddress>

n <local configuration file>

n Push to Start

n copy tftp flash”

n <ServerIPAddress>

n <Local configuration file>

n “bootflash”

n <Local configuration file>

n clear boot auto-config

n “set boot auto-config bootflash:" <configFileName>


n CatOS 1900

n "no snmp-server community <oldSnmpRO/RWCommunity> \r\n"

n "snmp-server community <newSnmpROCommunity> ro\r\n"

n "snmp-server community <newSnmpRWCommunity> rw \r\n"


VMware, Inc. 218

n CatOS

n "set snmp community read-only <newSnmpROCommunity \n"

n "set snmp community read-write <newSnmpRWCommunity> \n"

n Account

n “set password”

n <old password>

n <new password>

n Confirm <new password>

n Privilege

n CatOS1900

n “conf t\r\n”

n "no enable password level 15\r\n"

n "enable secret 0 <newPrivPassword>"\r\n"

n "no enable secret\r\n"

n "enable password level 15 <newPrivPassword> "\r\n"

n CatOS

n "set enablepass\n"

n <old Privilege password>

n <new Privilege password>

n Confirm new password

Operating System managementn "term length 0”

n “set length 0"

n "show module"

n "delete <partition> <image filename>"

n "dir"

n "squeeze <partition>"

n "copy <partition><srcFilename> tftp"

n "copy <protocol>://"<user>:<password>@<serverLocation>/<srcFilename> <partition><destFilename>

n "copy <partition> <srcFilename><protocol>://<user>:<password>@<serverLocation>/<destFilename>


VMware, Inc. 219

n <server Location>

n <source Filename>

n <destination Filename>

n “Y”

n "dir <partition>"

n "verify <partition> <filename>"

n "verify ?"

n "verify <slot> <name>"

n "clear boot system all"

n "set boot system flash <partition> <image>"

n set boot config-register 0x2102"

n "copy <partition> <image> <slaveModuleNum>/<partition> BTSYNC_<image>"

n "reset < slaveModuleNum >"

n "show module < slaveModuleNum >"

n "show run"

n "no boot bootldr <partition> <old imageName>"

n "no boot system flash <partition> <old imageName>"

n "boot bootldr <partition> <new imageName>"

n "boot system flash <partition> <new imageName>"

n “exit”

n "copy running-config startup-config"

Device Monitoringn "show version"

n "show ip"

n "show module "

n "ping "

n "traceroute "

n "show trunk"

n "show CDP neighbors detail"

n "show vlan"

n "show cam <mac>"


VMware, Inc. 220

n "write memory"

n "bootflash"

n "clear boot auto-config"

n "set boot auto-config bootflash:< configFileName >"

n "show snmp hostname"

n "show snmp contact"

n "show snmp location"

n "show interfaces"

n "show vlan"

n "show snmp ifalias"

n "show port status"

n "show cam dynamic"

n "show arp"

n "show port"

n "show port trunk"



running Yes Yes ASCII SNMP/TFTP,Telnet, SSH,Telnet/TFTP,SSH/TFTP



ARP Table Yes Yes


CAM Table Yes No


Identity Yes Yes


VMware, Inc. 221


Interfaces Yes Yes

Keys No No

Memory Yes Yes


OSPF Settings No No


Routes Yes Yes



VLANs Yes No


Cisco Catalyst OS Switches - Auto Discovery SNMP

n Issue: Auto Discovery with SNMP Credentials and Accounts, and Privilege Passwords may hang ifthe devices do not have names. For example: no name set on CAT OS Switches. Note that this maybe prevalent in the CAT OS devices, due to the no name default setting on CAT OS Switches.

n Resolution: Set the Name on the device. On CAT OS, use the set system name command inEnable mode.

Cisco Catalyst 1900 - Serial Numbers not Displayed

n Serial numbers for the CAT OS 1900 devices are not being displayed.

Catalyst OS Switch 1900

n After a hardware pull, using either SNMP or non-SNMP mechanisms, the Non-Volatile Memoryinformation will not display. The device does not support the display of Non-Volatile Memory. This is adevice limitation. Other memory information can be accessed using the SNMP mechanism.

Cisco Catalyst 4000 Series

n The OS version for 12.2(18)EW4 for the CAT 4000 series switch displays UNKNOWN for the featureset in the application.

The device responds with UNKNOWN during an SNMP-GET.

n For example:

SNMP-GET(.1.3.6.1.4.1.9.9.25.1.1.1.2.4)->CW_FEATURE$UNKNOWN$


VMware, Inc. 222

Cisco Content ApplianceDevice Type Content Cache

Specific Model(s) 507, 511, 512, 560, 565, 566, 590, 611, 612, 674, 7305, 7320, 7341




Configuration Change Notification (Events) Traps and Syslogs




Quick Commands

View Arp

View Interfaces

View CDP Neighbors

Resync

Clear Cache

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes




VMware, Inc. 223


n SNMP

n SysDescription must have “Application Content Network”

n Model name is obtained from the following OIDs (in order):

n 1.3.6.1.4.1.9.9.368.1.34.3.0

n 1.3.6.1.4.1.2467.1.34.3.0

n Part number column of the CISCO-ENTITY-ASSET-MIB for the chassis entry

n Term

n Should be able to enter enable mode

n getModel result should be able to mapped to a valid sysObjectID.

n show version should have “Application Content Network”



n "show startup-config"

n "show running-config"

n Term/TFTP

n "copy startup-config tftp <SERVERIPADDR> <local configFile name>”

n "copy running-config tftp <SERVERIPADDR> <local configFile name>”


n “conf t”

n Configuration is entered line by line

n “exit”

n To copy run to start, “copy running-config startup-config”

n Term/TFTP

n "copy tftp <SERVERIPADDR> <local configfilename> startup-config"


VMware, Inc. 224


Credential managementn SNMP v1/v2

n “snmp-server community <newString>"

n “snmp-server community <newString> rw"

n "no snmp-server community <oldString>"

n "no snmp-server community <oldString> rw"

n Account

n Enter enable mode

n “conf t”

n "username <username> password <password>”

n "username <username> privilege <user Privilege Level>”

n "no username <oldUser>”

n Privilege

n Enter enable mode

n “conf t”

n "username admin password <newPrivPass>”


Device monitoringn “show disk”

n “show disk current”

n “show hardware”

n “reboot”

n “show interface”

n “ping”

n “traceroute”

n “show arp”

n “no terminal more”

n “terminal length 0”

n "show cdp"


VMware, Inc. 225

n "show ip interface"



running Yes Yes Copy To Start ASCII Telnet, SSH,Telnet/TFTP,SSH/TFTP

startup Yes Yes Reboot ASCII Telnet, SSH,Telnet/TFTP,SSH/TFTP



ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes Yes


OSPF Settings No No


Routes Yes Yes



VLANs No No



VMware, Inc. 226

Cisco Content Appliance

n Privilege level access is controlled by the administrator account password. The administrator accountcannot be rolled since it is used for the privilege password.

n Although users of level 0 or 15 can be created, use of a level 15 account will not prompt for an enablepassword even when dropping back to user level.

Cisco Content Services SwitchDevice Type ContentCache

Specific Model(s) 11050, 11501, 11503, 11506

Operating System and Firmware Versions Not Tested

Communication Protocols Telnet, Telnet/TFTP, SSH/TFTP, SSH





Operating System Management Protocols NA (Telnet/FTP, SSH/FTP)

Quick Commands

View Arp

View Interfaces

View CDP Neighbors

Resync

Clear Cache

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes


VMware, Inc. 227




Discovery/Identify MethodsThe following information must be available for this driver class to manage an applicable device.

n SNMP

n sysDecription must have either “Content Switch” or "Application and Content Networking"

n Term

n Not supported





n Term/TFTP




n “conf t”


n “exit”


n Term/TFTP




VMware, Inc. 228


n “conf t”

n "username <username> password <password> superuser"


n SNMP v1/v2

n "snmp community <newSnmpROCommunity> read-only"

n "snmp community <newSnmpRWCommunity> read-write"

n "no snmp community <oldSnmpROCommunity> “

Operating System nanagementn Following commands should be supported for OS management

n “show version”

n “show disk”

n “terminal timeout 120”

n "save_config”

n "save_profile”

n "archive log sys.log”

n "archive script default-profile”

n "conf t”

n "no ftp-record DEFAULT_FTP”

n "ftp-record DEFAULT_FTP <serverIp> <ftpUser> <ftpPwd> <filePath>

n “exit”

n “upgrade”

Device monitoringn "show interface"


n “reboot”

n “show version”

n “show boot-config”

n “show disk”


VMware, Inc. 229

n “ping”

n “traceroute”


n “show cdp”





running Yes Yes copyToStart ASCII Telnet,Telnet/TFTP,SSH/TFTP, SSH

startup Yes Yes Reboot ASCII Telnet,Telnet/TFTP,SSH/TFTP, SSH



ARP Table No Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes Yes


OSPF Settings No No


Routes No Yes



VLANs No No


VMware, Inc. 230

Cisco IOS RouterDevice Type Router

Specific Model(s)

1700, 1711, 1801, 1801W, 1811, 1841, 1861, 1000, 1003, 1020, 1004, 1005,1601, 1602, 1603, 1604, 1605, 12012, 12004, 12008, 1710, 1720, 1401, 1750,1407, 1417, 12416, 12406, 12410, 1760,12404, 1721, 1751, 12010, 10400,12016, 10720, 1701, 1720VPN, 1941/K9, 1941W-A/K9, 2000, 2500, 2102,2202, 2501, 2502, 2503, 2504, 2505, 2506, 2507, 2508, 2509, 2510, 2511,2512, 2513, 2514, 2515, 2801, 2821, 2517, 2518, 2519, 2520, 2521, 2522,2523, 2524, 2525, 2516, 2610, 2611, 2612, 2613, 2620, 2621, 2501FRADFX,2501LANFRADFX, 2502LANFRADFX, 2610M, 2611M, 2610XM, 2611XM,2620XM, 2621XM, 2650XM, 2651XM, 2691, 2650, 2651, 2811, 2851,2901/K9, 2911/K9, 2921/K9, 2951, 2951/K9, 3000, 3825, 3101, 3102, 3103,3104, 3202, 3204, 3220, 3845, 3620, 3640, 3251, 3660, 3661Ac, 3661Dc,3662Ac, 3662Dc, 3662AcCo, 3662DcCo, 3631, 3745, 3725, 3825, 3845, 3925,3945, 4000, 4500, 6000, 6100, 6130, 6260, 6400, 6400Nrp, 677i, 674,6400UAC, 761, 762, 765, 766, 771, 772, 775, 776, 751, 752, 753, 7000, 7010,7507, 7513, 7505, 4700, 7206, 7576, 7204, 7202, 7206VXR, 7204VXR,7507z, 7513z, 7507mx, 7513mx, 7120At3, 7120Ae3, 7120Smi3, 7140Dualt3,7140Duale3, 7140Dualat3, 7140Dualae3, 7140Dualmm3, 7750Mrp200,7120Quadt1, 7120T3, 7120E3, 7140Octt1, 7140Dualfe, 7750Ssp80,7609OSR, 7750, 7603, 7606, 7606-S, 7304, 7609, 7613, 801, 802, 803, 804,805, 828, 806, 811, 8110, 813, 8510, 8515, 826QuadV, 826, 827QuadV, 811,827, 831837,827H, 836, AS5200, AS2509RJ, AS2511RJ, AS5300, AS5800,AS5400, AS5350, ASR 1000, ASR1002-X,ASR 1004 AIR-AP1120B-A-K95,ASR 1006, ASR 9000, Cat6000, CS500, Catalyst6kMsfc2, Catalyst5kRsfc,Catalyst6kMsfc, Catalyst295024GDC, Catalyst3200, Catalyst3100,Catalyst1800, Catalyst1601, Catalyst3001, CE7305, CE510, DPA7630,IAD2430, IAD2431, IAD2432, IAD2431-8FXS, IAD2431-16FXS,IAD2431-1T1E1, IAD2432-24FXS, MC3810, Mc3810V3, ONS15540ESPx,Pro1003, Pro1004, Pro1005, Pro2500PCE, Pro2501, Pro2503, Pro2505,Pro2507, Pro2509, Pro2511, Pro2514, Pro2516, Pro2519, Pro4500, Pro751,Pro752, Pro753, Pro765, Pro766, Pro2520, Pro2522, Pro2524, Pro1601,Pro1602, Pro1603, Pro1604, Pro2502, Pro2504, Pro2506, Pro2508, Pro2510,Pro2512, Pro2513, Pro2515, Pro2517, Pro2518, Pro2523, Pro2525, Pro4700,SOHO77, SOHO76, SOHO97, SOHO91, SOHO96, UBR7246, UBR904,UBR7223, UBR924, UBR7246VXR, UBR912C, UBR912S, UBR914, UBR925,UBR10012, UBR7111, UBR7111E, UBR7114, UBR7114E, UBR905,WSX5302, WS-C6506-E, ASR 1002-F, VG 202, SOHO 78, VG 204, C3900-SPE200, CISCO3945-CHASSIS, C819G-4G-A-K9(CISCO 891), ASR1001,WS-C3560X-24T-S, WS-C3560X-48T-L, WS-C2960C-8TC-L, WS-C2960C-8PC-L, WS-C3560C-8PC-S, WS-C2960+48PST-L, WS-C2960+24PC-L,ASR1002-X,ISR4300,ISR4321,ISR4321/K9,ISR4451,ISR4331,Catalyst 6807-XL,ISR4351, C887VA-K9, CISCO 887VA-K9, CSR1000V, ciscoCSR1000v


Boot Upgrade, OS Upgrade

For 1801W Models: 12.4(4)XC3, 12.4(24)T1 For 1941/K9, 941W-A/K9,2901/K9, 2911/K9, 2921/K9, 2951/K9, 3925, and 3945 Models: 12.4(24.6) For2951 Models: 12.4(23.15.8), 12.4(24.6) For 1841 Models: 15.x

For WS-C3560, WS-C2960 Models: 15.1(3)S2, 15.0(2)SE4, 15.0(2)SE7

Communication Protocols SNMP/TFTP, TELNET, TELNET/TFTP, SSH, SSH/TFTP, SSH/SCP


VMware, Inc. 231




Credential Management SNMPv1/v2v3, Account, Privilege


Quick Commands

View Routes

View ARP

View FrameRelay Map

View Interfaces

Clear Interface Counters

View Diagnostic

View Processor CPU

View Network Management Events

Resync

Append ACL Rule

Delete ACL

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes




VMware, Inc. 232


n SNMP:


n sysDescription value contains IOS or Internetwork Operating System

n sysServices value indicates a Layer 3 device

n Cisco Rom ID (.1.3.6.1.4.1.9.2.1.1.0) is retrievable

n Terminal:

n Device responds with an error to show vtp counters

n show version response contains “Internetwork Operating System” or “Cisco IOS”

n show version response should not contain "AIR-AP"

n CiscoSysID should not contain either of "9.1.164" or "9.1.107" or "9.1.533" or "9.1.507" or"9.1.525"Cisco IOS


Configuration Capturen Terminal

n startup configuration : show start

n running configuration: show run

n VTP Configuration: show VTP

n SDM Configuration: show SDM

n SNMP/TFTP



n Devices using CISCO-CONFIG-COPY-MIB (id is a unique integer):

n .1.3.6.1.4.1.9.9.96.1.1.1.1.2.id -> 1 (TFTP)

n .1.3.6.1.4.1.9.9.96.1.1.1.1.3.id -> 1 (network file)





VMware, Inc. 233

n Terminal/TFTP






n SNMP/TFTP




n .1.3.6.1.4.1.9.9.96.1.1.1.1.2.id -> 1 (TFTP)


n .1.3.6.1.4.1.9.9.96.1.1.1.1.4.id -> 1 (network file)



Commit confign SNMP:

n .1.3.6.1.4.1.9.2.1.54.0 -> 1

n Terminal:


Credential managementn For non AAA user account password

n conf t

n no aaa new-model

n For type 0

n line console 0


VMware, Inc. 234

n For type 1

n line aux 0

n login

n password

n exit


n "conf t"

n "aaa new-model"

n "no username <oldUser>"

n "username <username> privilege <userLevel> password <password>"

n "username <username> password <password>"

n "exit


n Check for RADIUS or TACAS

n "conf t"

n "sh run"

n "no enable secret level"

n "no enable password level"

n "enable secret level < level> <newPrivPass>"

n "enable password level <level> <newPrivPass>"

n "exit"

n SNMP (v1v2)

n term length 0"

n show run | include community"

n "show run"

n "conf t"

n "snmp-server community <newSnmpCommunity> <view> <type> acl"

n "no snmp-server community <oldSnmpCommunity>"

n "exit"

n SNMP v3

n "conf t"

n “term length 0


VMware, Inc. 235

n “snmp-server user”

n "show snmp user"

n “show snmp group”

n "no snmp-server engineID local "

n “snmp-server engineID local”

n “snmp-server context <context name>”

n “snmp-server view <view name>”

n “snmp-server group <group name>”

n "snmp-server user <user name> <group name> v3 encrypted auth (md5|sha) <password> (privdes|des56|aes 128|aes 192|aes 192) <password>”

n "no snmp-server user <user name> <group name> v3”

Operating System managementn "term length 0"

n "config-register 0x2102"

n "show file systems"

n "reload"

n "hw-module module <module Number> reset"

n "hw-module standby reload"

n "archive download-sw /overwrite tftp://<server IP Address>/<image name>"

n "archive download-sw /safe tftp://<server IP Address>/<image name>"

n "write memory"

n archive download-sw /overwrite ftp:<username>:<password>@//<server IP Address>/<image name>

n archive download-sw /safe ftp:<username>:<password>@//<server IP Address>/<image name>

Device monitoringn show run

n show start

n show version

n show config

n show interfaces

n configure term

n terminal length 0


VMware, Inc. 236

n exit

n write memory

n reload





n show file systems

n show module

n show vtp counters


n dir

n dir nvram:

n dir flash:

n squeeze flash:

n show priv

n show bootvar

n show snmp contact



n show sdm prefer



running Yes Yes CopyToStart,Reboot

ASCII SNMP/TFTP, TELNET,TELNET/TFTP, SSH,SSH/TFTP, SSH/SCP

startup Yes Yes CopyToStart,Reboot



VMware, Inc. 237



ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes Yes


OSPF Settings Yes No


Routes Yes Yes



VLANs No No

VTP Yes No

SDM Yes No


Cisco IOS - Out-of-Sync

n When a SNMP/TFTP mechanism is used with only a Community String credential, the Runningagainst Startup Configuration Out-of-Sync icon is not displayed. A valid Account and/or PrivilegePassword credential is needed to pull the Startup configuration on Cisco IOS devices.

Cisco IOS Update

n Issue: An issue exists where the OS image resided in bootflash, but was not the boot loader image.Additionally, the system image file was not in the show version command. In this case, the applicationcould not free space in the target location. Manual intervention is needed to free space.

When there is insufficient space in the target location for an OS update on Cisco IOS devices withClass A file systems, the system attempts to free up additional space by deleting and squeezing thesystem image name displayed in the show version command.


VMware, Inc. 238

For example:

r2621-vpn uptime is 6 weeks, 5 days, 1 hour, 0 minutes

System returned to ROM by reload

System image file is "flash:c2600-ik9o3s3-mz.122-15.T9.bin"

n Resolution: Manually, complete a delete and squeeze on that filename before beginning the OSupdate.

Cisco 3845

n Memory is not currently supported for the Cisco 3845.

Cisco 7206

n Issue: Cisco Model 7206 does not correctly display the Hardware Controller I/O Controller version. Itincorrectly displays the version as 0.0. This issue is present with IOS Version 12.0(4)XE2, and not inVersion 12.2(25)S2.

n Resolution: Cisco Model 7206 should be upgraded to a new IOS version.

TFTP Pushes May Fail Silently

n Silent configuration command failures may occur when using any of the TFTP transfer methods(snmp/tftp, ssh/tftp, or telnet/tftp). Error status, if any, is being missed from the device following thetransfer.

TACACS+ Implementation

n Issue: Some versions of IOS have a TACACS+ implementation issue that causes additionalcharacters to be added to the login User Name. When this occurs, it may cause occasional loginfailures.

n Resolution: Modify a custom version of the stdlib/stdterm.inc file to issue a backspace characterbefore the username as shown below.

a Make a directory named $VOYENCE_HOME/custompackage/stdlib

b Copy the file $VOYENCE_HOME/package/stdlib/stdterm.inc to$VOYENCE_HOME/custompackage/stdlib/stdterm.inc

c Change the termLogin() function in this new file:

d Search for: send(session,userId+stdEOL,true);

e Change to: send(session,asc(0x08)+userId+stdEOL,true);

f After making the change, restart the device server services.

Cisco IOS Router - Running Configuration Contents

n Running configuration contents of the following form must be removed prior to pushing, or theresulting job will fail based on “Invalid input” messages from the device when the data valuesfollowing the “certificate self-signed” line are processed:

crypto pki certificate chain TP-self-signed-2725887360


VMware, Inc. 239

certificate self-signed 01

3082024C 308201B5 A0030201 02020101 300D0609 2A864886 F70D0101 04050030

31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274

Cisco IOS SwitchDevice Type Switch

Specific Model(s)

Catalyst Models: 1000, 1100, 1116, 116C, 116T, 1200, 1220, 1220c, 1220i,1400, 1420, 1600, 1601, 1800, 1900, 1900c, 1900i, 1900 Lite Fx, 1912C,2200, 2820, 2900, 2980ga, 2908xl, 2912MfXL, 2912XL, 2916, 2924CXL,2924CXLv, 2924MXL, 2924XL, 2924XLv, 2926, 2940 8TF, 2940 8TT, 2948g,2950-12, 2950-24, 2950-24C, 2950 24GDC, 295024LREG, 295048T, 2950St24LRE997, 2950 t24, 2955C12, 2955T12, 297024, 297024TS, 2980g, 3000,3001, 3100, 3200, 3201 WMIC, 3500, 3508GXL, 3512XL, 3524XL, 3550-12T,3550-24, 3550-48, 3560-24PS, 3560-24TS, 3560-48PS, 3560-48TS,3560G-24PS, 3560G-24TS, 3560G-48TS, 375024, 375024ME, 375024T,375024TS, 375048, 3750G16TD, 3750Ge12Sfp, 37xxStack, 3900, 3920,4000NAM, 4003, 4006, 4503, 4506, 4507, 4510, 4912g, 4948, 4948-10G, 4kGateway, 5000, 5002, 5500, 5505, 5509, 5k Rsfc, 6006, 6009, 6506, 6509,6509neb, 6513, 6k Msfc, 6k Msfc2, 6knam, 8510 msr, 8515 msr, 8540csr,8540msr, 9006, 9009, 3560V2-48TS, 3560V2-24TS, 2350-48TD

IE3000, IE-3000-4TC, ME3400, ME-C3750-24TE, WS-CBS3020-HPQ, WS-CBS3032-DEL, WS-CBS3120G-S, WS-CBS3110, WS-C2960G-24TC-L, WS-C2960-48TT-S, WS-C3750-24ME, WS-C3750-48TS, WS-C6509, WS-C3560V2-48TS, WS-C3560V2-24TS, WS-C3750-24TS, WS-C2350-48TD,WS-C4948-10GE, WS-C2960-24LT-L, WS-C3560-12PC-S, WS-C2960-8TC-S,WS-C3560V2-48PS, SM-ES3G-16-P, WS-C3560X-48P, WS-C3560X-24P,WS-C3560V2-24PS, WS-C4006, WS-C4948, WS-C3560E-48PD, WS-C2960-8TC-L, WS-C2960G-8TC-L, WS-CBS3130X-S-F, WS-CBS3012-IBM-I,WS-C2960-24PC-S, WS-C2960-48PST-S, WS-C2960S-24PS-L,ME-3600X-24FS-M,WS-C4510RPlusE, CiscoSmXd3k48Ge2SFPPoe, WS-C4500X-32, WS-C4500X-16,CAT38xxStack,WS-C3850-48P,WS-C3850-24T,WS-C3850-48T,WS-C3850-24P,WS-C3850-48F,WS-C3850-12S,WS-C3850-24S,WS-C3850-24U,WS-C3850-48U,WS-C3850-24XU,WS-C3850-12X48U,WS-C3850-12XS,WS-C3850-16XS,WS-C3850-24XS,WS-C3850-48XS,CAT36xxStack,WS-C3650-24TS,WS-C3650-48TS,WS-C3650-24PS,WS-C3650-48PS,WS-C3650-24TD,WS-C3650-48TD,WS-C3650-24PD,WS-C3650-48PD,WS-C2960X-48FPS-L,WS-C2960X-48FPD-L,WS-C3560-24PS-S,WS-C2960XR-24PS-I,WS-C3750X-12S,WS-C3750X-24,WS-C3750X-48P,WS-C3750X-48T,WS-C3560V2-24PS,WS-C3560V2-48PS,WS-C3750V2-24PS,WS-C3750V2-48PS,WS-C4507RPlusE,WS-C6503-E, C9300, C9300-48P,C9300-48T-E, C9300-24T-E, C9300-48P-A, C9300-48P-E, C9300-24P-E,C3560CX-8PC-S, WS-C2960L-24TQ-LL


Boot Upgrade, OS Upgrade For IE-3000-4TC Models: 12.2(0.0.109)EX ForWS-C2960G-24TC-L Models: 12.2(44)SE LAYER_2, For WS-C4500X-XXModels: 03.04.05.SG

Communication Protocols SNMP/TFTP, TELNET, TELNET/TFTP, SSH, SSH/TFTP, SSH/SCP




VMware, Inc. 240


Credential Management SNMPv1/v2, v3, Account, Privilege


Quick Commands

View ARP

View Interfaces

View Vlans

View Logs

View CDP Neighbors

Resync

Clear_Cache

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes




n SNMP

n sysObjectID value contains "1.3.6.1.4.1.9" or "1.3.6.1.4.1.11"

n sysDescription value contains “IOS” or “Internetwork Operating System”

n sysServices value should not indicate a Layer 3 device but a Layer 2 device

n Cisco Rom ID (.1.3.6.1.4.1.9.2.1.1.0) is retrievable


VMware, Inc. 241

n Terminal

n Device responds positively to show vtp counters

n "term length 0" should get to standard enable or disable prompt

n show version response contains “Internetwork Operating System” or “Cisco IOS”

n show version response should not be IOSXR.

n CiscoSysID should not contain either of "9.1.164" or "9.1.107" or "9.1.533" or "9.1.507" or"9.1.525"

n show interfaces should respond positively





n VTP Configuration: show VTP

n SDM Configuration: show SDM

n SNMP/TFTP




n .1.3.6.1.4.1.9.9.96.1.1.1.1.2.id -> 1 (TFTP)

n .1.3.6.1.4.1.9.9.96.1.1.1.1.3.id -> 1 (network file)




n Terminal/TFTP



n For VLAN Database

n Via Term

n VLAN Text


VMware, Inc. 242

n “vlan database

n show current

n Via Term/TFTP - Get the partition name using the following:

n "dir flash:"

n "dir const_nvram:"

n "dir cat4000_flash:"

n "dir nvram:"

n “copy <partitionName>:/vlan.dat tftp://<Server IP Address>/<local filename>”

n Term/SCP

n SCPget vlan.dat




n SNMP/TFTP




n .1.3.6.1.4.1.9.9.96.1.1.1.1.2.id -> 1 (TFTP)


n .1.3.6.1.4.1.9.9.96.1.1.1.1.4.id -> 1 (network file)



Commit confign SNMP

n .1.3.6.1.4.1.9.2.1.54.0 -> 1

n Terminal


n For Binary vlan database:


VMware, Inc. 243

n copy tftp://<server IP Address>/<vlan filename> <vlan partition>:vlan.dat

Credential managementn Check for RADIUS or TACAS, if true fail the operation.

n term length 0

n sh run


n conf t

n no aaa new-model

n For type 0

n line console 0

n For type 1

n line aux 0

n login

n password

n exit


n "conf t"

n "aaa new-model"




n "exit



n "conf t"

n "sh run"





n "exit"


VMware, Inc. 244

n SNMP (v1v2)

n term length 0"


n "show run"

n "conf t"



n "exit"

n SNMP v3

n "conf t"

n “term length 0


n "show snmp user"






n "snmp-server group <group name>”



Operating System managementn "term length 0"

n "config-register 0x2102"

n "show file systems"

n "reload"

n "hw-module module <module Number> reset"

n "hw-module standby reload"

n "archive download-sw /overwrite tftp://<server IP Address>/<image name>"

n "archive download-sw /safe tftp://<server IP Address>/<image name>"


VMware, Inc. 245

n "write memory"

n archive download-sw /overwrite ftp:<username>:<password>@//<server IP Address>/<image name>

n archive download-sw /safe ftp:<username>:<password>@//<server IP Address>/<image name>


n show start

n show version

n show config

n show interfaces

n configure term

n terminal length 0

n exit

n write memory

n reload





n show file systems

n show module

n show vtp counters


n dir

n dir nvram:

n dir flash:

n squeeze flash:

n show priv

n show bootvar

n show snmp contact




VMware, Inc. 246

n ping

n view ip route

n view arp

n view ip interface brief

n clear counters

n view process cpu

n view management event

n copy run start

n traceroute "ip-addr"

n view vlan

n view logging

n view cdp neighbors detail

n view frame-relay map

n view diag



running Yes Yes CopyToStart,Reboot


startup Yes Yes CopyToStart,Reboot


vlan.dat Yes Yes Reboot Binary TELNET/TFTP, SSH/TFTP,SSH/SCP

vlan text No Yes NA ASCII Telnet, SSH



ARP Table Yes Yes



VMware, Inc. 247


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes Yes




Routes Yes Yes



VLANs No No


ME-C3750-24TE and WS-C3750-24ME - Display Error

n The ME-C3750-24TE and WS-C3750-24ME do not display identically, depending on SNMP orTerminal pull of SystemProperties using the sysObjectID to get the model.

Cisco IOS Switches - Missing VLAN Database Command

n The ME3400 does not return VLAN text, due to lack of support for the vlan database command. Thiswill appear in the scheduler with a message of the form: Dialog getVLANs failed: Warning, can notresolve input value (ConfigFile:vlan text.Content)

Cisco IOS Switches - VLAN Databases

n To pull VLAN Databases successfully, the device must be discovered as a Cisco IOS Switch.

n If it is not discovered as a Cisco IOS switch, you must edit the IOSModels.XML in$VOYENCE_HOME/custompackage /pkgxml, and then re-discover the device.

Cisco IOS Switches - Missing Hardware Information

n Issue: Cisco IOS Switches with OS version 12.0 (5.2) XU do not display device OS informationcorrectly in the Device Hardware tab.


VMware, Inc. 248

n Resolution: Disable all SNMP Credentials, and then Pull the Hardware using Non-SNMP. Doing thisensures the memory size is pulled correctly, and is then populated using the terminal commands.This must be completed before beginning an OS Upgrade.

Cisco IOS - Out-of-Sync

n When a SNMP/TFTP mechanism is used with only a Community String credential, the Runningagainst Startup Configuration Out-of-Sync icon is not displayed. A valid Account and/or PrivilegePassword credential is needed to pull the Startup configuration on Cisco IOS devices.

Cisco IOS Upgrade - SNMP Information

n There is no available OS install target for the 3524 Switch.

n Issue: SNMP information is not present for this model. The information must be retrieved fromthe IOS CLI.

n Resolution: Remove all SNMP community strings from the communication settings of the device,and re-pull the hardware specification. This provides the needed memory information to allow foran OS upgrade.

Cisco IOS Update

n Issue: An issue exists where the OS image resided in bootflash, but was not the boot loader image.Additionally, the system image file was not in the show version command. In this case, the applicationcould not free space in the target location. Manual intervention is needed to free space.

When there is insufficient space in the target location for an OS update on Cisco IOS devices withClass A file systems, the system attempts to free up additional space by deleting and squeezing thesystem image name displayed in the show version command.

n For example:

r2621-vpn uptime is 6 weeks, 5 days, 1 hour, 0 minutes

System returned to ROM by reload

System image file is "flash:c2600-ik9o3s3-mz.122-15.T9.bin"

n Resolution: Manually, complete a delete and squeeze on the filename before beginning the OSupdate.

TFTP Pushes May Fail Silently

n Silent configuration command failures may occur when using any of the TFTP transfer methods(SNMP/TFTP, SSH/TFTP, or Telnet/TFTP). Error status, if any, is being missed from the devicefollowing the transfer.

TACACS+ Implementation

n Issue: Some versions of IOS have a TACACS+ implementation issue that causes additionalcharacters to be added to the login User Name. When this occurs, it may cause occasional loginfailures.


VMware, Inc. 249

n Resolution: Modify a custom version of the stdlib/stdterm.inc file to issue a backspace characterbefore the username as shown below.

a Make a directory named $VOYENCE_HOME/custompackage/stdlib

b Copy the file $VOYENCE_HOME/package/stdlib/stdterm.inc to

$VOYENCE_HOME/custompackage/stdlib/stdterm.inc

c Change the termLogin() function in this new file:

n Search for: send(session,userId+stdEOL,true);

n Change to: send(session,asc(0x08)+userId+stdEOL,true);

n After making the change, restart the device server services.

Cisco IOS Switch — Running Configuration Contents

n Running configuration contents of the following form must be removed prior to pushing, or theresulting job will fail based on invalid input messages from the device when the data values followingthe certificate self-signed line are processed:

crypto pki certificate chain TP-self-signed-2725887360

certificate self-signed 01

3082024C 308201B5 A0030201 02020101 300D0609 2A864886 F70D0101 04050030

31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274

Cisco IOS XRDevice Type Router

Specific Model(s) CRS-1, 12000XR Series,NCS-5500

Operating System and Firmware Versions Version 3.4 and higher

Communication Protocols SSH, Telnet, SSH/TFTP, Telnet/TFTP


Configuration Change Notification (Events) Syslogs & Traps



Operating System Management ProtocolsSSH/TFTP, Telnet/TFTP, SSH/FTP, Telnet/FTP (FTP protocols require externalFTP server)

Quick Commands

View Routes

View ARP

View Interfaces

Clear Interface Counters


VMware, Inc. 250

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes




n SNMP

n Should have a valid Cisco ROM Id (".1.3.6.1.4.1.9.2.1.1.0") OR SysObjectID should contain"1.3.6.1.4.1.9"

n SysDescription should contain “IOS XR”

n Term

n show version output should contain "isco IOS XR "

n Model No and Version can be retrieved from show version output.



n "show run"

n "show install active summary"


VMware, Inc. 251

n Term/TFTP

n "copy running-config tftp:/<Server IP Address>/<Local filename>"


n conf t\"

n Send configuration line by line to the device as device commands

n "commit"

n In case of “commit” failure

n "show configuration failed"

n "exit"

n Term/TFTP

n "copy tftp://<SERVERIPADDR>/<configFile> running-config"

n In case of failure

n "show configuration failed"


n "config"

n "snmp-server community <newSnmpCommunity> RO SystemOwner"

n "snmp-server community <newSnmpCommunity> RW SystemOwner"

n "no snmp-server community < oldSnmpCommunity >"

n "commit"

n "exit"

n Account

n "show tacacs server-groups"

n "show radius server-groups"

n "show aaa userdb"

n "conf"

n "username < userName>"

n "password 0 < password >"

n "group root-system"

n "group <retrieved group info>"


VMware, Inc. 252

n "commit"

n "exit"

n "no username < oldUser >"

Operating System managementn Following commands are being used for OS Upgrade of IOS XR devices via transfer protocol FTP or

TFTP

n "install remove inactive sync"

n "install add <protocol>://<server IP Address>/<image Name> sync"

n "install activate <package list> sync "

n "y"

n "install commit"

Device monitoringn "term length"

n "show version"

n "show inventory chassis"

n "show memory summary"

n "show filesystem"

n "show version”

n "dir"

n "show diag"

n "ping "

n "show ip route"

n "show arp"

n "traceroute "

n "show ip interface brief"

n "clear counters"

n "conf t"

n "admin"

n "show hosts"

n "show cdp neighbors detail"

n "show interface "


VMware, Inc. 253

n “show mac-address-table”

n “show run router static”



running Yes Yes NA ASCII SSH, Telnet, SSH/TFTP,Telnet/TFTP

admin Yes Yes NA ASCII SSH, Telnet, SSH/TFTP,Telnet/TFTP

packages No Yes NA ASCII SSH, Telnet, SSH/TFTP,Telnet/TFTP



ARP Table Yes No


CAM Table Yes No


Identity Yes No

Interfaces Yes No

Keys No No

Memory Yes No


OSPF Settings No No


Routes Yes No



VLANs No No


VMware, Inc. 254


Cisco IOS XR Network Operating System

n The Cisco IOS XR - Secure Domain Router functionality is not supported.

n This device driver does not interface with the Cisco IOS XR's configuration store and commit lists.

Cisco IOS XR - Login Credentials

n It is advisable to use login credentials that belong to the root-system group, for this driver. Allcredentials created by this driver will belong to the root-system group.

n When rolling a login credential, an attempt to place the new user in the same user groups with the olduser is made.

n Login credentials cannot be rolled if TACACS or Radius authentication is in use.

n To identify if TACACS/Radius is in use, the show [tacacs|radius] server-groups command isused.

n Login credentials will not be rolled if the output of the show [tacacs|radius] server-groupscommand has a global list of servers indicating external authentication is in use.

Cisco IOS XR - SNMP Communities

n It is advisable to use SNMP communities that belong to the SystemOwner attribute set, with thisdriver. All communities created by this driver will belong to the SystemOwner attribute set.

Cisco IOS XR - Conifguration Changes

n When pushing config changes, If a commit fails when pushing configuration changes to the device,the show configuration failed command is issued. The results for the show configuration failedcommand is included in the output of the jobs result text.

n Push to the user mode config is currently the only capture command supported.

Cisco Intrusion Prevention System (IPS)Device Type Firewall

Specific Model(s) IPS-4255-K9








VMware, Inc. 255


Quick Commands Ping, Traceroute, View Interfaces, View Logs

Features available


Auto-Discovery Yes



Configlets Yes



Cut-Through Access No


SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes




n SNMP

n sysObjectID value contains “1.3.6.1.4.1.9.”

n Serial Number should be available from ".1.3.6.1.2.1.47.1.1.1.1.11.1" OID

n Terminal

n The output of show version command contains “Cisco Intrusion Detection System" or "CiscoIntrusion Prevention System"

n Model name and Serial Number should be available from the output of show version command

n Hostname is available from the output of show conf | include host-name command.



VMware, Inc. 256



Configuration dDeployn Terminal



n username <username> password <password> privilege administrator

n no username <userName>

n SNMP

n service notification

n (read-only | read-write) –community <newSnmpCommunity>

Operating Systemn upgrade ftp|scp://<username>@<serverIpAddress>/<imageName>

Device Monitoringn term length

n show privilege

n show version

n show diag




running Yes Yes Copy Config toBackup

ASCII TELNET, SSH


VMware, Inc. 257



ARP Table No No


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes No


OSPF Settings No No


Routes No No



VLANs No No


Cisco Intrusion Prevention System (IPS)

n Banner input is error prone. Do not put the word exit on a line by itself in a banner.

n This driver was built on an IPS-4255 but should manage any Cisco IPS/IDS 42xx system.

Cisco IronPortDevice Type Server

Specific Model(s) S360


Communication Protocols SSH, SSH/FTP, SSH/SCP


Configuration Change Notification (Events) Syslog



VMware, Inc. 258



Quick Commands

Ping

Traceroute

Reboot

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

Syslog Yes

Rollback Yes

Quick Commands Yes




n SNMP

n Model name should be retrievable and should resolve to pkgID.

n sysObjectID should have "1.3.6.1.4.1.8072"

n sysDecription should have “IronPort”

n Term

n version command should have “IronPort” in the output.

n Should be able to get the hostname using command showconfig

n Should be able to get the model number using command version


VMware, Inc. 259



n "showconfig"

n SSH/FTP or SSH/SCP

n "saveconfig"

n Use FTP or SCP to get the configuration file

Configuration deployn SSH/FTP or SSH/SCP

n FTP or SCP the configuration file to the device

n "loadconfig"

n Send “2” and then "voyence.cfg" to select the uploaded configuration file.


n "snmpconfig"

n "SETUP"

n “Y”

n “<new SNMP Community>”

n Account

n "userconfig"

n "NEW"

n “<user name>”

n “1”

n “<password>”

n "commit" with "Added new user"

n "userconfig"

n "DELETE"

n <Old username>

n Send “1” and “Y”


VMware, Inc. 260

n “commit” with "Deleted the old user"


Device monitoringn "ping "

n "traceroute "

n “reboot”

n "version"

n "showconfig"



current Yes Yes NA ASCII SSH, SSH/FTP,SSH/SCP



ARP Table No Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes No


OSPF Settings No No


Routes No Yes



VMware, Inc. 261



VLANs No No


Cisco IronPort

n Only Total Memory is available.

n Non-volatile memory is not available.

n If a user is logged in, the account credential cannot be deleted. To enable the deletion of the accountcredentials, the session must be disconnected and re-connected using new credentials.

n adminStatus and operationalStatus of the interfaces are not available when using terminal. Thedefault value is UP.

Cisco LightstreamDevice Type ATM Switch

Specific Model(s) LS 1010, LS 1015


Communication Protocols SNMP/TFTP, Telnet, SSH, Telnet/TFTP, SSH/TFTP, SSH/SCP


Configuration Change Notification (Events) Syslogs, Traps


Credential Management SNMP v1/v2, v3, Account, Privilege


Quick Commands

Ping

Traceroute

Features available


Auto-Discovery Yes



Configlets Yes



VMware, Inc. 262





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands No




n SNMP

n sysObjectID value contains "9.1.164" or "9.1.107"

n sysServices value should indicate a Layer 3 device





n SNMP/TFTP




n .1.3.6.1.4.1.9.9.96.1.1.1.1.2.id -> 1 (TFTP)

n .1.3.6.1.4.1.9.9.96.1.1.1.1.3.id -> 1 (network file)





VMware, Inc. 263

n Terminal/TFTP






n SNMP/TFTP




n .1.3.6.1.4.1.9.9.96.1.1.1.1.2.id -> 1 (TFTP)


n .1.3.6.1.4.1.9.9.96.1.1.1.1.4.id -> 1 (network file)



Commit confign SNMP

n .1.3.6.1.4.1.9.2.1.54.0 -> 1

n Terminal


Credential managementn Check for RADIUS or TACAS, if true fail the operation.

n term length 0

n sh run


n conf t

n no aaa new-model


VMware, Inc. 264

n For type 0

n line console 0

n For type 1

n line aux 0

n login

n password

n exit


n "conf t"

n "aaa new-model"




n "exit”



n "conf t"

n "sh run"





n "exit"

n SNMP (v1v2)

n term length 0"


n "show run"

n "conf t"



n "exit"


VMware, Inc. 265

n SNMP v3

n "conf t"

n “term length 0


n "show snmp user"






n “snmp-server group <group name>”





n show start

n show version

n show config

n show interfaces

n configure term

n terminal length 0

n exit

n show arp

n show access-lists



VMware, Inc. 266


running Yes Yes copyToStart ASCII SNMP/TFTP,Telnet, SSH,Telnet/TFTP,SSH/TFTP,SSH/SCP

startup Yes Yes Reboot ASCII SNMP/TFTP,Telnet, SSH,Telnet/TFTP,SSH/TFTP,SSH/SCP



ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes Yes


OSPF Settings No No


Routes No Yes



VLANs No No


VMware, Inc. 267

Cisco NexusDevice Type Switch

Specific Model(s)

1000V, 1010, 5010, 5020, 5672UP, C7010, C7018, MDS 9222i, 5548, 5596,7009, 7210, 3064, 9508, 56128P, 6004, 9396,9332,9372PX,7706,3172,C9372,9000, 3548,N3K-C3548P-10G,C7710, 9504, Nexus 3064-X,Nexus 3048, Nexus 3132, Nexus7718, C93108TC-EX,C93180LC-EX,C93120TX, Nexus C93120TX, C93120, C9372TX, Nexus 9372TX, C9372,N9K-C93180YC-FX, C93180YC-FX, C93180, Nexus 9318, C93180YC,C9364C, Nexus9000 C9364C, C9364


4.0(1a)N1(1a) For MDS 9222i Models: 4.1(3a) For 1000V Models:4.0(4)SV1(1)For 7010 Models: 5.1(3) and 5.1(4)

For 9508 Model: 6.1(2)I2(2)

For 1010 Model: 4.2(1)SP1(5.1a)

For 5672UP Model : 6.2(10)

For 7210 Model : 7.0(5)

For 9396 Model: 6.1(2)I3(2)






Operating System Management Protocols SCP, FTP

Quick Commands

View Routes

View ARP

View Interfaces

Clear Cache

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes


VMware, Inc. 268


Syslog Yes

Rollback No

Quick Commands Yes




n SNMP

n sysDescr contains "Cisco Nexus OS"

n Serial number should be obtainable from ".1.3.6.1.2.1.47.1.1.1.1.11"

n Get the sysObjectId

n Term

n The software banner through command show inventory should have “Cisco Nexus” or “CiscoNX-OS”

n Commands show version, show inventory and show snmp should be able to return systemproperties information.

n show interface command should return interface information.

n sysObjectID value must be mapped by the retrieved model name from CiscoModels.xml.





n Term/TFTP

n "copy startup-config tftp://<Server IP Address>/<local filename>"

n "copy running-config tftp://<Server IP Address>/<local filename>"


VMware, Inc. 269


n "configure terminal"

n Send configuration lines one by one as device commands.

n Term/TFTP

n "copy tftp://<Server IP Address>/<local filename> running-config "


n "snmp-server community <new Community String> ro "

n "snmp-server community <new Community String> rw "

n "no snmp-server community <old Community String> ro"

n "no snmp-server community <old Community String> ro"

n Account

n "show aaa authentication"

n "username <username> password <password> role network-admin"

n "no username < old Username>"

Operating System managementn copy running-config startup-config

n copy [ftp|scp]://<user>@<server>//<imageName> bootflash:/// vrf management

n show install all status

Device monitoringn "configure terminal"

n "terminal length 0"

n “end”

n "copy running startup"

n "show inventory"

n "show version"

n "show snmp"

n "dir ?"

n "reload"


VMware, Inc. 270

n "show users"

n "show module "

n "copy ?"

n "delete ?"

n "format ?"

n "ping "

n "traceroute "

n "show ip interface vrf all"

n "show ip static-route vrf "

n "show ip arp vrf all"

n “show ip route vrf all”



running Yes Yes copyToStart ASCII Telnet, SSH,Telnet/TFTP,SSH/TFTP

startup No Yes NA ASCII Telnet, SSH,Telnet/TFTP,SSH/TFTP



ARP Table Yes No


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes Yes


VMware, Inc. 271



OSPF Settings No No


Routes Yes Yes



VLANs No No


Cisco Nexus

n The driver supports the MDS series running NX-OS if Nexus or NX-OS appears in the show versionresponse, and the driver is successful in determining the identity, system properties, and interfacesfor the device.

n The management VRF must have a default route configured or file transfers will fail.

n If the command “system default switchport” appears literally in the configuration, it must beremoved or commented out before pushing with terminal, or the resulting % Incomplete commandmessage will be treated as a failure, although the push content will be accepted. Same is the casewith commands "switchport", "switchport mode fex-fabric" and "spanning-tree port type edge" in caseof Cisco Nexus 7010 with 5.1(4) version.

n Privilege account rolls are not supported because accounts are role based, and credentials are givenetwork-admin privileges. Any attempt to execute a job including privilege credential changes will fail.

n IP addresses and ARP table entries are not reported using SNMP.

n Config Change Detection is only supported using syslog monitoring.

n Switches running 4.0(4)SV1(1) have been observed to intermittently fail account credential rolls whenboth the account and password are changed.

n A failsafe in the device prevents deletion of the original account, if the account is logged in.

n The driver executes a show users command if this message is detected, but the account does notappear in the response.

n Currently, only the account password can be successfully changed. This behavior is not observedon the hardware products.

n Push to start is not supported.

n The copy tftp startup command is deprecated.


VMware, Inc. 272

n The config content is silently ignored, although the job shows as successful in the scheduler.

n The recommended Cisco procedure of write erase, reload, copy tftp running cannot beimplemented due to a high probability of the application and managed device being located ondifferent subnets.

n Delete and Backup options are not available for OS Upgrade.

n In the case of SCP, copy of images takes about 10-15 minites whereas via FTP, it takes only 1 to 2minutes.

n The driver will attempt to reconnect once during upgrade when the session is lost due to switchover:

n The "show install all status" command is run if the session is successfully re-established. Thiscommand does not return to a command prompt on its own; Ctrl+C is required and is issued if thesuccess message is encountered.

n In the event that it is not, the session will timeout after 15 minutes with no significant progressmessages. The upgrade itself may in fact succeed, but NCM will mark the job as failed.

n The upgrade output is not currently analyzed to automate reboot of the CMP modules in theevent that this is needed to complete the upgrade. This step must be performed manually (i.e.,via cut-thru or by an external login).

Cisco Nexus 1000V

n The Nexus 1000v may not report IP addresses in the Interfaces tab, due to a limitation in the SNMPagent of the device.

n The Nexus 1000V virtual switch running 4.0(4)SV1(1) has been found to include commands thatcannot be pushed back to the device from the command-line interface. Such content must becommented out or removed prior to scheduling a full configuration push or the job will fail (thoughother changes will effectively succeed). This behavior has not been observed for pushes using TFTP.

An example of these commands is included below; other forms may occur as well.

n limit-resource u4route-mem minimum 32 maximum 80

n limit-resource u6route-mem minimum 16 maximum 48

Cisco MGXDevice Type Router

Specific Model(s) 8850 Wide Area Switch - MGX 8850 PXM-45 and MGX 8250 PXM-1


Communication Protocols Telnet, SSH






VMware, Inc. 273


Quick Commands

Enable Automatic Backups

Disable Automatic Backups

Display Cards

Display Card

Display IMA Groups

Display IMA Group Counters

Display IMA Link Counters

Display Alarms

Display Hardware Alarms

Display Software Alarms

Display Port Counters

Display Port

Display Ports

Display Connection

Display Lines

Display PNNI Node List

Display PNNI Neighbor

Display PNNI Link

Display PNNI Routing Policy

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

Syslog No

Rollback No

Quick Commands Yes




VMware, Inc. 274


n SNMP

n Matched model number for MGX devices must be retrieved from models file using sysObjectID

n Terminal

n dsplicnodeid to get the chassis serial number

n dspcds to get the node name

n Determine the model number from models file.



n “sesntimeout 2360”

n "saveallcnf -v"

n "ll CNF"

n "dsplicnodeid"

n "shellConn"

n "setLogin”

n FTP the image


n Send the configuration line by line to the device as device commands

n Term/FTP

n "ll CNF"

n "sesntimeout 1360"

n "restoreallcnf -f < backupFile.filename>"

n This command is issued after a backup capture is transferred to the machine using FTP. Thisbackup is named in the revision history as "FILE: <BackupName> SAVED: <Date>" Sendingthe string as described will initiate the transfer and restoreallcnf command.


VMware, Inc. 275

n If these files are needed for manual restore procedures they can be found in the /tftpbootdirectory of the device server.

n "y"


n "cnfsnmp community <new Snmp Community> ro"

n "cnfsnmp community <new Snmp Community> rw"

n Account

n "cnfpasswd"

n <Old Password>

n <New Password>


Device monitoringn "dspifip"

n "cc"

n "dspcd"

n "dspcds"

n "version"

n "dsplicnodeid"

n "dspalms"

n "dspimagrps"

n "dspimagrpcnt "

n "dspimalncnt "

n "dsphwalm"

n "dspportcnt "

n "dspport "

n "dspports"

n "dspcon"

n " dspcons -port "

n " dspcons -vpi "


VMware, Inc. 276

n " dspcons -vci "

n "dsplns "

n "dsppnni-node"

n "dsppnni-node-list"

n "dsppnni-neighbor"

n "dsppnni-link"

n "dsppnni-routing-policy"






ARP Table No No


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory No Yes


OSPF Settings No No


Routes No No



VLANs No No


VMware, Inc. 277


Cisco MGX - Restore Causes Device Reset and Loss of Service

n Issue: Restoring the device capture causes a device reset and loss of service.

n Resolution: Testing shows the loss of service is in the range of 2 to 5 minutes.

Cisco MGX - PXM-1 Card Shows Only Two Interfaces

n Issue: PXM-1 cards show only two interfaces.

n Resolution: The device SNMP agent only reports two interfaces. This is a limitation of the networkdevice.

Cisco PXM-1 Cards - MIB not entirely Supported

n Issue: PXM-1 cards do not support the Entity MIB and hardware information is displayed differentlythan a PXM-45 card.

n Resolution: The models having PXM-1 cards require terminal access to collect hardwareinformation.

Cisco PXM-1 Cards - No SSH support

n Issue: No SSH support for Cisco PXM-1 cards.

n Resolution: The Cisco PXM-1 cards does not support SSH.

Cisco PXM-1 Cards - Not Responding After saveallcnf Command

n Issue: PXM-1 cards can sometimes not respond after a saveallcnf command.

n Resolution: Device capture operations will not succeed if the device does not respond with thesuccess status of the command.

Cisco RPM Cards - Cards not Reported in Hardware Output

n Issue: RPM Cards are not fully reported in the MGX hardware output.

n Resolution: RPM cards are reported under the RPM IOS hardware inventory and do not providedspcd information at the terminal.

Cisco MDSDevice Type Switch

Specific Model(s) 9124, 9134, 9216, 9216A, 9216i, 9509, 9513,9148,9506

Operating System and Firmware Versions San-OS 3.0, 3.2, 3.3

Communication Protocols Telnet, SSH, Telnet/TFTP, SSH/TFTP, SSH/SCP



VMware, Inc. 278





Quick Commands

View NAT Setup

View ARP

View Interfaces

View VSANs

View Logs

View CDP Neighbors

Resync

Clear Cache

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

Syslog No

Rollback Yes

Quick Commands Yes




n SNMP

n sysObjectID should have “1.3.6.1.4.1.9” (cisco enterprise id)

n sysDescription should have “SAN-OS”

n sysServices should be 0x06 (layer 2 and 3 flag)


VMware, Inc. 279



n “term length 0”

n “show start”

n “show run”

n SNMP/TFTP

n Set “.1.3.6.1.4.1.9.2.1.55.<Server IP address>” to TFTP the config file


n Try to push vlan config separately if tagged

n Set “.1.3.6.1.4.1.9.2.1.50.<SERVERIPADDR>” to start TFTP of the local config file

n For copyToStart set “.1.3.6.1.4.1.9.2.1.54.0” to 1.

n Term

n Send configuration one by one using command line.


n To get the view and ACL information

n "term length 0”

n "show run | include community"

n "show run"

n "conf t"

n "snmp-server community <newSnmpCommunity> <view> <community string type> <acl>”

n "no snmp-server community <oldSnmpCommunity>”

n “exit”

n Account

n "term length 0"

n “show run"

n "config term"


VMware, Inc. 280

n "username <username> password <password> role <userLevel>”

n "username <username> password <password>


n “exit”

n Privilege

n "term length 0"

n "sh run"

n "conf t"

n "no enable secret level <level>”

n "no enable password level <level>”

n "enable secret level < level> <newPrivPass>”

n "enable password level <level> <newPrivPass>”

n “exit”

n SNMP V3

n "config terminal"

n "snmp-server user <securityName> network-admin <authProtPart+privPassPart>”

n "no snmp-server user <oldsn>”


Device monitoringn "show interface"

n "term length 0”

n "show system resources"

n "show arp"

n "show interface brief"

n "show vsan"

n "show logging"

n "show cdp neighbors detail"



VMware, Inc. 281


running Yes Yes copyToStart ASCII Telnet, SSH,Telnet/TFTP,SSH/TFTP,SSH/SCP

startup Yes Yes Reboot ASCII Telnet, SSH,Telnet/TFTP,SSH/TFTP,SSH/SCP



ARP Table No No


CAM Table No No


Identity No Yes

Interfaces Yes Yes

Keys No No

Memory Yes Yes


OSPF Settings No No


Routes No No



VLANs No No

Known IssuesThe following details existing device issues that have been discovered with other releases. In most cases,a resolution is included to address the issue.

Cisco MDS

n If the device is upgraded to run NX-OS, it will not appear as a Cisco Nexus device class until it is re-discovered. It is not necessary to drop the device, but pre-Nexus config pushes may fail, dependingon the content.


VMware, Inc. 282

Cisco Wide Area Application Services (WAAS)Device Type Content Cache

Specific Model(s) 512, 612, 674, 7371




Configuration Change Notification (Events) Traps and Syslogs




Quick Commands

View Arp

View Interfaces

View CDP Neighbors

Resync

Clear Cache

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes




VMware, Inc. 283


n SNMP

n SysDescription must have “Wide Area Application Services”

n Model name is obtained from the following OIDs (in order):

n 1.3.6.1.4.1.9.9.368.1.34.3.0

n 1.3.6.1.4.1.2467.1.34.3.0

n Part number column of the CISCO-ENTITY-ASSET-MIB for the chassis entry

n Term

n Should be able to enter enable mode

n getModel result should be able to mapped to a valid sysObjectID.

n show version should have “Wide Area Application Services”





n Term/TFTP




n “conf t”


n “exit”


n Term/TFTP



VMware, Inc. 284



n “snmp-server community <newString>"

n “snmp-server community <newString> rw"

n "no snmp-server community <oldString>"

n "no snmp-server community <oldString> rw"

n Account

n Enter enable mode

n “conf t”

n "username <username> password <password>”

n "username <username> privilege <user Privilege Level>”


n Privilege

n Enter enable mode

n “conf t”

n "username admin password <newPrivPass>”


Device monitoringn “show disk”



n “reboot”

n “show interface”

n “ping”

n “traceroute”

n “show arp”


n “terminal length 0”

n "show cdp"


VMware, Inc. 285




running Yes Yes Copy To Start ASCII Telnet, SSH,Telnet/TFTP,SSH/TFTP

startup Yes Yes Reboot ASCII Telnet, SSH,Telnet/TFTP,SSH/TFTP



ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes Yes


OSPF Settings No No


Routes Yes Yes



VLANs No No


VMware, Inc. 286

Cisco Wireless LAN ControllerDevice Type Switch

Specific Model(s)

2100 series, 4400 series. AIR-CT5508-K9, AIR-CT2504-K9, WS-SVC-WISM-1-K9, WS-SVC-WISM2-K9,AIR-CT5520-K9, AIR-CT8540-K9, AIR-CTVM-K9, AIR-CT3504-K9.

Operating System and Firmware Versions 4.0, 6.0.128.0, 7.6.130.0

Communication Protocols Telnet. SSH, Telnet/TFTP, SSH/TFTP






Quick Commands

View Routes Summary

View Arp Switch

View Interfaces

Save Config

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes




VMware, Inc. 287


n SNMP - Either of the following has to be found:

n SysDescription should have “Cisco Controller”

n SysObjID should be either:

n 1.3.6.1.4.1.9.1.828

n 1.3.6.1.4.1.14179.1.1.4.3

n 1.3.6.1.4.1.14179.1.1.4.4

n 1.3.6.1.4.1.9.1.1069

n 1.3.6.1.4.1.9.1.1279

n 1.3.6.1.4.1.9.1.1293

n Term

n show sysinfo contains “Cisco Controller”

n show inventory to get the Model number


Configuration capturen Term/TFTP

n "transfer upload datatype config"

n "transfer upload mode tftp"

n "transfer upload serverip <SERVERIPADDR>"

n "transfer upload path /"

n "transfer upload filename <local File name>"

n "transfer upload start"

n Term

n “show run-config”

n “show running-config or show run-config commands”


VMware, Inc. 288

Configuration deployn Term/TFTP

n "transfer download datatype config"

n "transfer download mode tftp"

n "transfer download serverip <SERVERIPADDR>"

n "transfer download path /"

n "transfer download filename <local file name>"

n "transfer download start"

n Term

n Configuration is sent line by line through command line.


n For creation of new account

n "config mgmtuser delete <username>"

n "config mgmtuser add <username> <password> read-write"

n "config mgmtuser delete <oldUser>"

n "config mgmtuser password <oldUser> p <TIME>"

n For Password change only,

n "config mgmtuser password <username> <password>”

n SNMP v1/v2

n "config snmp community delete <newSnmpCommunity>"

n "config snmp community create <newSnmpCommunity>"

n "config snmp community accessmode <community string type> "<newSnmpCommunity>"

n "config snmp community mode enable <newSnmpCommunity>"

n "config snmp community delete <oldSnmpCommunity>"


Device monitoringn "show interface summary"

n "show interface detailed "


VMware, Inc. 289

n "show sysinfo"

n "exit"

n "show udi"

n "show boot"

n "show inventory"

n “show memory statistics"

n "show route"

n "show arp switch"

n "show stats switch summary"

n "term len 0"

n "show route summary"



running Yes Yes NA ASCII Telnet/TFTP,SSH/TFTP

readable_run-config Yes Yes Save andReboot

ASCII Telnet, SSH

readable_running-config Yes Yes Save andReboot

ASCII Telnet, SSH



ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes Yes


VMware, Inc. 290



OSPF Settings No No


Routes Yes Yes



VLANs No No


n For WLC 5508:

n Interface via term is not working due to mismatch in the output format.

n Readable-run-config cannot be pushed although there is support in the package file.

n A warning appears that time is not set while pushing the running config, even after successfultransfer of the config file.

n System Location and System Contact values must be present in the device if they have to bepulled via Term correctly. Empty fields for System Location and System Contact might showincorrect values in the GUI if pulled via Term.

Cisco GSSDevice Type Load Balancer

Specific Model(s) GSS-4490-K9

Operating System and Firmware Versions 3.1(2)

Communication Protocols Telnet, SSH, Telnet/FTP, SSH/FTP, SSH/SCP








VMware, Inc. 291

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

Syslog No

Rollback No

Quick Commands Yes




n SNMP


n sysDescr value contains "Global site Selector"

n Terminal

Output of "show version" contains "Global site Selector"






VMware, Inc. 292



n Terminal/FTP and Terminal/SCP

n Running configuration properties

n copy running-config disk <filename>

n FTP/SCP configuration file to NCM

n Startup configuration properties

n copy startup-config disk <filename>

n FTP/SCP startup configuration file to NCM



n Release the session and throw an ERROR in the UI, if any Invalid/Unknown command is sent tothe device.


Configuration files can be pushed to the device as startup-configuration-properties file.

n FTP/SCP the configuration file from the NCM to the device

n copy disk startup-config <Filename>


n username <username> password <password> privilege admin

n username <oldUser> delete

n SNMP

n snmp-server community-string <community> ro|rw

n no snmp-server community-string <oldSnmpCommunity>

Operating System ManagementNA

Device Monitoringn show version

n show inventory


VMware, Inc. 293

n ping

n traceroute



n show arp

n show ip routes

n show interface eth0|eth1

n show disk

n show memory

n reload

Multi-Config FilesFollowing are the files used when storing and revisioning multiple configuration files for multi-configsupport.


Running configuration Yes Yes Copy to Startup ASCII SSH, Telnet

Startup configuration No Yes NA ASCII SSH, Telnet

Running-configuration-properties No Yes NA ASCII Telnet/FTP,SSH/FTP,SSH/SCP

Startup-configuration-properties Yes Yes Reboot ASCII Telnet/FTP,SSH/FTP,SSH/SCP



ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes No

Keys No No

Memory Yes No


VMware, Inc. 294



OSPF Settings No No


Routes Yes No



VLANs No No

Known issuesThe following information details existing device issues that have been discovered with other releases. Inmost cases, a resolution is included to address the issue:

n Syslogs and Traps are not supported.

Cisco UCSDevice Type Switch

Specific Model(s) UCS 6100, UCS 6120, UCS 6130, UCS 5100

Operating System and Firmware Versions 5.0(3)N2(2.1t)







Quick CommandsSetup Diagnostic, View Diagnostic Setup, Setup NAT, View NAT Setup, ViewDiagnostic

Features available


Auto-Discovery Yes



Configlets No




VMware, Inc. 295




SNMP Traps No

Syslog No

Rollback No

Quick Commands Yes




n SNMP


n sysDescr value contains "Ucs" or "ucs"

n Terminal

n Output of "show version" contains model name.

n Output of "show hostname" contains hostname of the device.





Device Monitoringn show system




VMware, Inc. 296


Running configuration No Yes No Text SSH, Telnet



ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces No Yes

Keys No No

Memory No No


OSPF Settings No No


Routes Yes Yes



VLANs No No

Cisco SGDevice Type Switch

Specific Model(s) SG300-10MP


Communication Protocols SSH/TFTP, Telnet/TFTP

Configuration Files Content Ascii





Quick CommandsPing, View Interfaces, View VLANs, View ARP, View Routes, View PasswordRules


VMware, Inc. 297

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

Syslog No

Rollback Yes

Quick Commands Yes




n Identity, device properties, and interfaces must be successfully retrieved from the device via thefollowing oids:

n identity: sysName.0

n sysObjectID: sysObjectID.0

n interfaces: IF- and IP-MIB tables

n serial number: entPhysicalSerialNum row for chassis entry in ENTITY-MIB, or MAC address forthe management interface

n Identity, device properties, and interfaces must be successfully retrieved from the device via thefollowing commands:

n hostname: successfully parsed from show system

n properties: successfully parsed from show system, show system id, and show version

n interfaces: successfully parsed from show interfaces configuration, show interfaces status, showvlan, and show ip interface

n sysObjectID must map to a model and the driver package ID in CiscoModels.xml


VMware, Inc. 298


Configuration capturen copy [ running-config | startup-configuration ] tftp://<serverIpAddress>/<remoteFilename>

Configuration Deployn copy tftp://<serverIpAddress>/<remoteFilename> [ running-config | startup-configuration ]


Credential Managementn SNMP:

n show snmp

n snmp-server community <newString> { serverIpAddress }

n no snmp-server community <oldString> { serverIpAddress }

n Account:

n show authentication methods

n show user accounts

n username <newUserId> password <newSecret> privilege <level>

n no username <oldUserId>

n Privilege password:

n enable password level <level> <newSecret>



Running configuration Yes Yes copyToStart Ascii SSH/TFTP,Telnet/TFTP

Startup configuration Yes Yes reboot Ascii SSH/TFTP,Telnet/TFTP



VMware, Inc. 299


ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes No


OSPF Settings No No


Routes Yes Yes



VLANs No No

Known issuesThe following details existing device issues that have been discovered during development or with otherreleases. A resolution is included to address the issue, if available.

n The device tested did not display any information regarding software family, so the success ofterminal discovery relies completely with successful parsing of information from the commands listedabove. It may be necessary to limit the number of device drivers in use if SNMP is not used.

n It is strongly recommended to disable console logging to avoid confusing the pattern recognitionexpressions in the driver.

n Key data is only present in the running configuration, which would cause problems with determiningsynced configurations, so it is programmatically removed from the result during a pull.

n The running configuration has a number of non-pushable lines involving software/CLI version and thelike. Although configuration management via Telnet and SSH is presently disabled, this content ispresently removed by use of regular expressions in the package XML.

n Since it does not appear explicitly in any device command output, model information is cross-referenced using the sysObjectID from show system, using the CiscoModels.xml file.

n Management ACL lines in the running configuration must be commented out, as the device will failthe push since they are bound to an interface (even if no changes are being made). This is not anissue for pushes to the startup configuration.


VMware, Inc. 300

n Commands of the form permit ip-source with the same parameters may repeat multiple times in theconfiguration as a result or pushing the running configuration. This appears to be device behavior inthe present firmware version. This will likely show as an out-of-sync condition in the NCM product.

n Volatile memory information is not presently available from SNMP or CLI, even in the show tech-support output, so only non-volatile (flash) information is displayed.

n Hardware information via terminal consists primarily of interfaces and chassis properties. SNMP ismore detailed in showing a motherboard and switch processor, but several entry descriptions may beterse or missing (such as the ports); this appears to be agent behavior.

n Account and privilege password rolls will fail if external authentication in active, or if the passwordrules of the device would be violated.

Cisco 300 SeriesDevice Type Switch

Specific Model(s) SF300-24P


Communication Protocols SNMP/TFTP, TELNET, TELNET/TFTP, SSH, SSH/TFTP




Credential Management SNMP v1/v2, v3, Account, Privilege


Quick Commands

Ping, Traceroute, View ARP, View Interfaces, View Vlans,Clear Interface Counters, View_Processor_CPU, View Logs,View CDP Neighbors, Resync,Clear_Cache

Features available


Auto-Discovery No

Pull configuration No


Configlets Yes





SNMP Traps No

Syslog No


VMware, Inc. 301


Rollback Yes

Quick Commands Yes




n SNMP

n sysObjectId contains "1.3.6.1.4.1.9"

n Term

n "terminal datadump" should get to standard enable or disable prompt.

n "show system" command should contain the Cisco SF300 device OID 1.3.6.1.4.1.9.6.1.82.24.2.

n "show ip interface" command should respond positively.


Configuration capture:n Terminal

n show start

n show run

n SNMP : Not Available

Device using CISCOSB-COPY-MIB (id is a unique integer) :

n .1.3.6.1.4.1.9.6.1.101.87.2.1.3.id -> 1 (local)

n .1.3.6.1.4.1.9.6.1.101.87.2.1.7.id -> 2 (running-config) or 3 (startup-config)

n .1.3.6.1.4.1.9.6.1.101.87.2.1.8.id -> 3 (tftp)

n .1.3.6.1.4.1.9.6.1.101.87.2.1.9.id -> Device Server IP

n .1.3.6.1.4.1.9.6.1.101.87.2.1.11.id -> local file name

n .1.3.6.1.4.1.9.6.1.101.87.2.1.14.id -> 1 ( operational state)

n .1.3.6.1.4.1.9.6.1.101.87.2.1.17.id -> 4 (create and go)

n Terminal / TFTP

n copy running-config tftp://ipaddress/file


VMware, Inc. 302

n copy startup-config tftp://ipaddress/file

n For VLAN Database

n VLAN Text - "show vlan" command


n From the console prompts, the device is put into configuration mode using enable 15 andconfigure terminal, and if successful, the configuration is issued line-by-line with checks for invalidinput messages.

n SNMP

Device using CISCOSB-COPY-MIB (id is a unique integer):

n .1.3.6.1.4.1.9.6.1.101.87.2.1.3.id -> 3(tftp)

n .1.3.6.1.4.1.9.6.1.101.87.2.1.4.id -> Device Server IP Address

n .1.3.6.1.4.1.9.6.1.101.87.2.1.6.id -> local file name.

n .1.3.6.1.4.1.9.6.1.101.87.2.1.7.id -> 1 (other)

n .1.3.6.1.4.1.9.6.1.101.87.2.1.8.id -> 1 (local)

n .1.3.6.1.4.1.9.6.1.101.87.2.1.12.id -> 3 (startup-config)

n .1.3.6.1.4.1.9.6.1.101.87.2.1.14.id -> 2( operational state)

n .1.3.6.1.4.1.9.6.1.101.87.2.1.17.id -> 4 ( create and go)

Commit confign Terminal


n reboot

n SNMP

n 1.3.6.1.4.1.9.6.1.101.1.2.0 -> 1

Credential Managementn Check for RADIUS or TACACS, if true fail the operation.

n terminal datadump

n show run



n no aaa new-model


VMware, Inc. 303

n For type 0

n line console

n For type 1

n line aux 0

n login

n password

n exit


n "configure terminal

n "aaa new-model"



n "username <username> password <password>

n "exit"


n Check for RADIUS or TACACS


n "show run"


n "enable password level <level> <newPrivPass>

n "exit"

n SNMP(V1/V2)

n "terminal datadump"

n "show run"



n "no snmp-server community <oldSnmpCommunity>

n "exit"

n SNMP v3


n "terminal datadump"

n "snmp-server user"


VMware, Inc. 304

n "show snmp user"

n "show snmp group"

n "no snmp-server engineID local"

n "snmp-server engineID local"

n "snmp-server context <context name>"

n "snmp-server view <view name>"

n "snmp-server group <group name>"

n "snmp-server user <user name> <group name> v3 encrypted auth (md5|sha) <password> (privdes | des56 | aes128 | aes 192 | aes 192) <password>

n "no snmp-server user <user name> <group name> v3"

Operating System Managementn ""terminal datadump"

n "dir"

n "copy flash://image tftp://<device server ip>/backupImageFileName"

n "copy tftp://<device server ip>/imageFileName flash://image"

n "boot system image-1 | image-2"


Device Monitoringn show run

n show start

n show version

n show interface status | configuration


n terminal datadump

n exit

n write memory

n reload

n copy running-config tftp://destination URL

n copy startup-config tftp://destination URL


n copy tftp://source URL running-config


VMware, Inc. 305

n dir

n show privilege

n show bootvar

n ping

n view arp

n view interfaces

n clear counters

n view process cpu

n copy run start

n traceroute "ip-addr"

n view vlan

n view logging

n view cdp neighbors detail




running Yes Yes Copy to Start ASCII SNMP/TFTP,TELNET,TELNET/TFTP,SSH, SSH/TFTP

startup Yes Yes Reboot ASCII SNMP/TFTP,TELNET,TELNET/TFTP,SSH, SSH/TFTP

vlan text No Yes Not Available ASCII SSH, Telnet

Device data



ARP Table Yes Yes


CAM Table Yes No


VMware, Inc. 306



Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes Yes


OSPF Settings No No


Routes Yes Yes



VLANs Yes No

Cisco FirePower Cisco FirePower Cisco FirePowerDevice Type Firewall

Specific Model(s) Cisco Firepower 9300 Security Appliance;

Operating System and Firmware Versions 3.1(4.69)

Communication Protocols SNMP/TFTP, TELNET, TELNET/TFTP




Credential Management SNMPv1/v2, Terminal, Privilege


Quick Commands View Interfaces

Features available


Auto-Discovery Yes



Configlets Yes





VMware, Inc. 307



SNMP Traps Yes

Syslog Yes

Rollback No

Quick Commands Yes




n SNMP:

n sysObjectID value contains 1.3.6.1.4.1.9.1

n Terminal:

n show version response contains “System Version” or “Package Version”

n show tech-support fprm-mgmt response contains “Cisco Firepower 9300 Security Appliance” andinterface information



n startup configuration : show configuration all no-pending no-diff-markers

n running configuration: show configuration all no-pending no-diff-markers


n Configlets must use the text config for the destination

Device monitoringn show configuration all no-pending no-diff-markers

n show export-config detail

n show tech-support fprm-mgmt

n show version brief


VMware, Inc. 308

n terminal length 0

n enable

n disable

n commit-buffer



running Yes Yes Not Applicable ASCII SNMP/TFTP, TELNET,TELNET/TFTP

startup Yes Yes Not Applicable ASCII TELNET, TELNET/TFTP



ARP Table No No


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No Yes



VLANs No No


VMware, Inc. 309

Cisco FirePower SMDevice Type Firewall

Specific Model(s) FPR9K-SM-36; Cisco FirePower SM-12 Mod

Operating System and Firmware Versions 9.6(1)

Communication Protocols SNMP/TFTP, TELNET, TELNET/TFTP , SSH ,SSH/TFTP , SSH/SCP






Quick Commands ping , traceroute , Routes , ARP and View Interfaces

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

Rollback No

Quick Commands Yes




n SNMP:



VMware, Inc. 310

n Terminal:

n show version response contains "Software Version"

n show version response contains "Hardware: FPR9K-SM-36" Hostname information .

n show configuration response contains "Serial Number" information.



n startup configuration : show startup-config

n running configuration: show running-config


n Configlets must use the text config for the destination

Device monitoringn show running-config


n show version

n show hostname


n terminal pager 0

n terminal pager 24

n enable

n disable



VMware, Inc. 311


running Yes Yes Not Applicable ASCII TELNET,SSH,SSH/TFTP,TELNET/TFTP

startup Yes Yes Not Applicable ASCII TELNET,SSH,SSH/TFTP,TELNET/TFTP



ARP Table Yes No


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes No


OSPF Settings No No


Routes No Yes



VLANs No No

Cisco FirePower TDDevice Type Firewall

Specific Model(s)Cisco FirePOWER FPR-2130 Security Appliance, Cisco FirePOWERFPR-2110 Security Appliance

Operating System and Firmware Versions v6.2.2







VMware, Inc. 312


Quick Commands ping , traceroute , Routes , ARP and View Interfaces

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

Rollback No

Quick Commands Yes




n SNMP:


n Terminal:

n show version response contains "Version"

n show inventory response contains "Serial Number" information.



n startup configuration : show startup-config


VMware, Inc. 313

n running configuration: show running-config



n show version

n show configuration all no-pending no-diff-markers

n show model

n show inventory



running Yes Yes Not Applicable ASCII TELNET,SSH

startup Yes Yes Not Applicable ASCII TELNET,SSH



ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes No


OSPF Settings No No


Routes No Yes



VMware, Inc. 314



VLANs No No

Cisco FirePower K9Device Type Firewall

Specific Model(s) FPR-4120-SUP, FPR-4110-SUP

Operating System and Firmware Versions v6.2.2





Credential Management SNMPv1/v2, v3, Terminal, Privilege


Quick Commands ping , traceroute

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

Rollback No

Quick Commands Yes




VMware, Inc. 315


n SNMP:




n configuration : show configuration

Device monitoringn show configuration

n show version






ARP Table No Yes


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory No No


VMware, Inc. 316



OSPF Settings No No


Routes No Yes



VLANs No No

Cisco WSADevice Type Firewall

Specific Model(s) S100V


Communication Protocols TELNET, SSH, SNMP






Quick Commands ping , traceroute

Features available


Auto-Discovery Yes



Configlets No





SNMP Traps No

Syslog Yes

Rollback No

Quick Commands Yes


VMware, Inc. 317





n SNMP:


n Terminal:

n version command output should have "Model”




Device monitoringn Version



running No Yes Not Applicable ASCII TELNET,SSH



ARP Table No Yes


CAM Table No No



VMware, Inc. 318


Identity Yes Yes

Interfaces No Yes

Keys No No

Memory Yes Yes


OSPF Settings No No


Routes No Yes



VLANs No No


VMware, Inc. 319

Citrix Devices 27This chapter contains the following topic:

n Citrix Netscaler LoadBalancer

Citrix Netscaler LoadBalancerDevice Type Content Cache

Specific Model(s) 7000, 9000, 10000, 12000

Operating System and Firmware Versions 6.0 or greater

Communication Protocols SSH, Telnet, SSH/SCP






Quick Commands Ping, Traceroute, View Interfaces, View Routes, View Arp, Resync

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

VMware, Inc. 320


Rollback Yes

Quick Commands Yes




n SNMP

n sysObjectID contains "1.3.6.1.4.1.5951.1"

n sysDescr contains "(?i)NetScaler\\s+NS[0-9\\.]+:\\s+Build"

n Terminal

n Get the model Number from the output of show version command

n Get the Hostname from the output of show mib command

n Get the Chassis Serial Number from the output of show hardware command



n show ns runningconfig

n show ns ns.conf

n SSH/SCP

n Scp /flash/nsconfig/ns.conf to device server

n Scp is used only for the startup configuration




n SSH/SCP:

n SCP config file to /tmp/ns.conf


VMware, Inc. 321

n cp /tmp/ns.conf /flash/nsconfig/ns.conf

n chmod 0644 /flash/nsconfig/ns.confcopy


n add system user <userName> <password>

n bind system user <userName> superuser 0

n set system user <userName> <password>

n rm system user <oldUser>

n SNMP

n add snmp community <newSnmpCommunity> ALL

n rm snmp community <oldSnmpCommunity>

Device monitoringn shell

n show interfaces

n stat ns

n reboot

n ping

n traceroute

n show route

n show arp

n exit



running Yes Yes Copy to Start ASCII SSH, Telnet,SSH/SCP

startup Yes Yes Reboot ASCII SSH, Telnet,SSH/SCP

/flash/nsconfig Yes Yes Reboot ASCII SSH/SCP

/var/customizations Yes Yes Reboot ASCII SSH/SCP


VMware, Inc. 322



ARP Table Yes No


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes Yes


OSPF Settings No No


Routes Yes No



VLANs No No


n The non-standard configuration mode included in newer versions of the NetScaler operating system,is not supported.

n The filesystem restore functionality requires VoyenceControl 4.1.0 HF6 or higher. update. Afilesystem restore on more than one file at a time causes data loss if VoyenceControl 4.1.0 HF6 orhigher is not installed.


VMware, Inc. 323

Covaro Devices 28This chapter contains the following topic:

n Covaro switch

Covaro switchDevice Type Switch

Specific Model(s) CC-814, CC-410, CC-512








Quick CommandsPing, Traceroute, Setup Diagnostic, View Diagnostic Setup, Setup NAT, ViewNAT Setup, View Diagnostic, ARP

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

VMware, Inc. 324


Syslog No

Rollback No

Quick Commands Yes




n SNMP

n sysObjectID contains .18022

n Terminal:

n Output of "show system" contains model name,serial number,hostname and software version.







n add user <user> <password> superuser

n no user <user>

n user password

n SNMP

n communityname <newCommunity> read-only

n communityname <newCommunity> read-write

n no communityname <oldCommunity>


VMware, Inc. 325

Device monitoringn Show system

n ping

n traceroute


n show arp



running Yes Yes No TEXT SSH, Telnet



ARP Table No Yes


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No Yes



VLANs No No


VMware, Inc. 326

D-Link Devices 29This chapter contains the following topic:

n D-Link xStack

D-Link xStackDevice Type Switch









Quick Commands Ping, View Arp, View Interfaces, View Routes

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

Syslog No

VMware, Inc. 327


Rollback Yes

Quick Commands Yes




n SNMP




n show config current_config

n show config config_in_nvram

n Terminal/TFTP

n upload configuration <SERVERIPADDR> <fileName>




n config account <oldUser>

n create account admin <newUser>

n delete account <oldUser>

n Privilege Account

n config admin local_enable

n SNMP

n show snmp community <oldString>


VMware, Inc. 328

n create snmp community <newString> view <mibView> read_only | read_write

n delete snmp community <oldString>

Device monitoringn enable admin

n enable clipaging

n disable clipaging

n ping

n show ipif

n show iproute

n show arpentry



running Yes Yes Copy to Start ASCII TELNET, SSH



ARP Table No No


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory No Yes


OSPF Settings No No


Routes No No



VMware, Inc. 329



VLANs No No


D-Link xStack

n No volatile or non-volatile storage information is available using SNMP, for this device class.

n User accounts are defined at administrator level.


VMware, Inc. 330

Digi Devices 30This chapter includes the following topics:

n Digi ConnectPort

n Digi TransPort

Digi ConnectPortDevice Type VPN Router

Specific Model(s) ConnectPort WAN VPN


Communication Protocols SSH. Telnet, SSH/TFTP, Telnet/TFTP

Configuration Files Content XML, Text

Configuration Change Notification (Events) Trap




Quick Commands Ping, View_Routes, View_Arp, View_Interfaces

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

VMware, Inc. 331


Syslog No

Rollback Yes

Quick Commands Yes

Privilege Mode Termlet Not applicable



n SNMP

n SysDescr contains "ConnectPort WAN VPN"

n SysObjectID contains "1.3.6.1.4.1.332.11.6"

n Terminal

n 'display device" command output contains "ConnectPort WAN VPN"


Configuration capturen SSH or Telnet

n 'backup print' command is issued in the CLI, and the file captured directly from the CLI output.

n SSH/TFTP or Telnet/TFTP

n The command 'backup to=[serverip]:[filename]' is issued in the CLI to transfer the file to theVoyence device server.

Configuration deployn SSH/TFTP or Telnet/TFTP

n The command 'backup from=[serverip]:[filename]' is issued in the CLI to transfer the file to thedevice from the Voyence device server.


n set snmp [publiccommunity|privateccommunity] = "[communityName]"

n Account

n newpass


VMware, Inc. 332

n [oldPassword]

n [newPassword]

n [newPassword]



running Yes Yes Reboot XML TFTP

running-text No Yes none Text Term



ARP Table Yes No


CAM Table No No


Identity Yes Yes

Interfaces Yes No

Keys No No

Memory Yes Yes


OSPF Settings No No


Routes Yes No

System Properties (Serial Number, OS Version, etc) Yes Yes (some)


VLANs No No


n The device config is XML. It can be pulled either via Term or TFTP but can only be pushed via TFTP.


VMware, Inc. 333

n The XML text of the Running config exceeds the UI editor's line length limit and therefore cannot beedited in the UI.

n The Running-Text config is generated from the running config by replacing all >< sequences in theXML config with >\n< sequences.

n The Running-Text config cannot be pushed back to the device. Trying to do so results in job failure.

Digi TransPortDevice Type Router

Specific Model(s) WR44-HXA3-DE1-XX, WR44-CXA3-DE1-XX

Operating System and Firmware Versions 5115

Communication Protocols Telnet, Telnet/FTP, SSH, SSH/FTP, SSH/SCP




Credential Management SNMP v1/2c, Account


Quick Commands Ping, Traceroute, ARP, Routes

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

Syslog No

Rollback Yes

Quick Commands Yes




VMware, Inc. 334


n SNMP

n The sysDescr OID must be accessible with the model following “Digi TransPort”. This value mustbe found in the models XML file.

n The sysDescr OID must be accessible with the serial number following “SER#:”.

n Terminal

n The “hw” command must list the model after the “Part#:” label. This value must be found in themodels XML file.

n The “hw” command must list the serial number after the "Serial Number:" label.


Configuration Capturen config c show

n FTP or SSH server enabled

Configuration Deployn super roles for issuing configuration command from the prompt

n FTP or SSH server enabled

Credential Managementn snmpuser 0 community token

n radcli 0 ?

n tacplus 0 ?

n user n name token

n user n access super

n user n password token

Device Monitoringn ati5

n hw

n ping


VMware, Inc. 335

n traceroute

n route print

n arp -a



running Yes Yes Copy ASCII Telnet, SSH

config.da0 Yes Yes Reboot ASCII Telnet/FTP,

SSH/FTP,

SSH/SCP

pwds.da0 Yes Yes Reboot ASCII

Note Notshown inconfigurationeditor forsecurityreasons.

Telnet/FTP,

SSH/FTP

fw.txt Yes Yes Reboot ASCII Telnet/FTP,

SSH/FTP,

SSH/SCP

sregs.dat Yes Yes Reboot Binary Telnet/FTP,

SSH/FTP,

SSH/SCP



ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes No


VMware, Inc. 336



OSPF Settings No No


Routes Yes No



VLANs No No


n Passwords cannot be pulled with the SCP protocol due to the device behavior. The FTP managementfor this file is currently working, but could fail in the future firmware releases. So, the file is listed asoptional for a complete Device Configuration State.

n SNMP community information is encrypted in both the configuration and command output, soinstance 0 must be used for management.

n The device telnet server only permits one connection. So, the device operations will fail if anothersession is already established to the device. Unless SSH is enabled on the device and "ssh 0nb_listen 1" is present in the running configuration, SSH access does not exhibit this behavior.

n The device supports private key files on flash, but they are not retrievable.

n Alternate configuration or password files are not supported, as NCM architecture does not have theability to conditionally specify the non-volatile configuration for comparison purposes. Power-upprofile 0 must be used.


VMware, Inc. 337

Dell Devices 31This chapter contains the following topic:

n Dell PowerConnect

Dell PowerConnectDevice Type Switch

Specific Model(s)

PCT6224P, PCT6224, PCT6224F, PCT6248, PCT6248P, M6248, M5424,PCM8024, PCM6348, M8024F, PCT7024, M8024-F, W-AP105, N3024,N2024, N30485,N3048


Communication Protocols Telnet, SSH, Telnet/FTP, SSH/FTP, SSH/SCP, Telnet/TFTP, SSH/TFTP


Configuration Change Notification (Events) SysLog



Operating System Management Protocols SCP, FTP, TFTP


Features available


Auto-Discovery Yes



Configlets Yes





VMware, Inc. 338


SNMP Traps No

Syslog Yes

Rollback Yes

Quick Commands Yes




n SNMP


n sysDescr value contains "Powerconnect"

n Terminal

n Output of "show system" contains "Powerconnect"





n Startup Configuration


n Terminal/TFTP


n copy running-config tftp://<server_IP>/<file_path>/<file_name>


n copy startup-config tftp://<server_IP>/<file_path>/<file_name>

n Terminal/FTP


n copy running-config sftp://<username>@<server_IP>/<file_path>/<file_name>


VMware, Inc. 339


n copy startup-config sftp://<username>@<server_IP>/<file_path>/<file_name>

n Terminal/SCP


n copy running-config scp://<username>@<server_IP>/<file_path>/<file_name>


n copy startup-config scp://<username>@<server_IP>/<file_path>/<file_name>




n Terminal/TFTP


n copy tftp://<server_IP>/<file_path>/<file_name> running-config


n copy tftp://<server_IP>/<file_path>/<file_name> startup-config

n Terminal/FTP


n copy sftp://<username>@<server_IP>/<file_path>/<file_name> running-config


n copy sftp://<username>@<server_IP>/<file_path>/<file_name> startup-config

n Terminal/SCP


n copy scp://<username>@<server_IP>/<file_path>/<file_name> running-config


n copy scp://<username>@<server_IP>/<file_path>/<file_name> startup-config


n username <user_name> password <password> level 15

n no username <user_name>


VMware, Inc. 340

n SNMP

n snmp-server community <community> ro|rw


Operating System Managementn copy running-config startup-config

n copy tftp://<server_address>//<image> image

n copy scp|sftp://<user>@<server_address>//<image> image

n boot system image1|image2


n show system id

n show switch

n ping

n traceroute



n show arp

n show arp switch

n show ip route static

n show tech-support

n show memory cpu

n reload

n show Ip route

Multi-config filesFollowing are the files used when storing and revisioning multiple configuration files for multi-configsupport:


VMware, Inc. 341


Running configuration Yes Yes Copy to Start ASCII Telnet, SSH,Telnet/FTP,SSH/FTP,Telnet/TFTP,SSH/TFTP,SSH/SCP

Startup configuration Yes Yes Reboot ASCII Telnet, SSH,Telnet/FTP,SSH/FTP,Telnet/TFTP,SSH/TFTP,SSH/SCP

Device dataThe following data represents device data per device class:


ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes No


OSPF Settings No No


Routes Yes Yes



VLANs No No

Known issuesThe following information details existing device issues that have been discovered with other releases. Inmost cases, a resolution is included to address the issue.

Dell PowerConnect

n Cut-through is not working.


VMware, Inc. 342

n Pull, Push, and OS upgrade using TFTP are not tested, since TFTP from the Dell device to deviceserver is failing.

n Non-volatile memory information is not available.

n Static routes using SNMP display all the other routes along with static routes, whereas using terminalonly static routes are being displayed.

n IP address and Subnet Mask information of the interfaces are not available using terminal.

n For Push and Pull using FTP/SCP to work, an FTP login "ftpuser" with password "forFTP" must existon the NCM device server.

n SNMP location and contact has to be configured to display the correct values.

n In "Update OS Image" window, "Projected Free Space" is shown as negative value since "TotalSpace" value is not available.


VMware, Inc. 343

Edgewater Devices 32This chapter contains the following topic.

n Edgewater EdgeMarc Router

Edgewater EdgeMarc RouterDevice Type Router

Specific Model(s) 4200, 4300T, 4500, 5300, 6400








Quick Commands Ping, Traceroute, View Interfaces, View Routes, View Arp, Reboot Unit

Features available


Auto-Discovery Yes



Configlets No





SNMP Traps No

Syslog No

VMware, Inc. 344


Rollback Yes

Quick Commands Yes




n SNMP

n sysObjectIDs: 1.3.6.1.4.1.8072.3.2.10.* or 1.3.6.1.4.1.19139.*

n Compiler Options at OID .1.3.6.1.4.1.2021.100.6.0

n Interface table from MIB-2



n ewn save <remoteFile>

n cat /etc/config/ <remoteFile>

n Terminal/TFTP

n ewn save <remoteFile>

n tftp -p -l /etc/config/ <remoteFile> -r <fileName> <SERVERIPADDR>



n Terminal/TFTP

n tftp -g -l /etc/config/<remoteFile> -r <fileName> <SERVERIPADDR>

n ewn load <remoteFile>


n passwd <username>


VMware, Inc. 345

n SNMP

n cat /etc/config/snmpd_defs.conf | sed 's/^SNMP_RO|RW _COMM=<oldSnmpCommunity> /SNMP_ RO|RW _COMM=<snmpCommunity>/

n cp -f /tmp/snmpd_defs.conf /etc/config/snmpd_defs.conf

n echo (SNMP_ RO|RW _COMM)=<snmpCommunity>

n ewn save <IDXNUMBER>-comm.conf2

n ewn load <IDXNUMBER>-comm.conf2

Device monitoringn cat /var/ewn_model

n cat /etc/platform

n cat /etc/version

n reboot

n ping

n netstat

n arp

n traceroute

n ifconfig






ARP Table No Yes


CAM Table No No



VMware, Inc. 346


Identity No Yes

Interfaces No Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No Yes



VLANs No No


VMware, Inc. 347

Enterasys Devices 33This chapter contains the following topic:

n Enterasys SSR

Enterasys SSRDevice Type Router

Specific Model(s) XP 2400

Operating System and Firmware Versions E10.0.0.3A








Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

VMware, Inc. 348


Rollback Yes

Quick Commands Yes




n SNMP

n sysDescr value contains “Enterasys”




n system show startup-config

n system show active-config

n Terminal/TFTP

n copy (active | startup) to tftp://<SERVERIPADDR>/ <fileName>



n copy scratchpad to (active | startup)

n Terminal/TFTP

n copy tftp://<SERVERIPADDR>/<fileName> to (scratchpad | startup)

n copy scratchpad to active



VMware, Inc. 349

Device monitoringn reboot

n system show

n enable

n exit

n configure

n cli set command completion off

n cli terminal monitor off

n cli set terminal rows 0

n copy active to startup

n exit







ARP Table No Yes


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory No Yes


VMware, Inc. 350



OSPF Settings No No


Routes No Yes



VLANs No No


Enterasys SSR

n Credential management is not supported.

n Comment characters are not ignored by the device class and are skipped when the configuration ispushed using Telnet or SSH.

n The presence of the last modified comment is used to distinguish full configurations from configlets.


VMware, Inc. 351

Ericsson Devices 34This chapter includes the following topics:

n Ericsson ECN Switch

n Ericsson MSED

Ericsson ECN SwitchDevice Type Switch

Specific Model(s) ECN320, ECN330








Quick CommandsStandard quick commands, view routes, view ARP, Resync, view Interfaces,clear cache

Features available


Auto-Discovery Yes



Configlets Yes





VMware, Inc. 352


SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes




n SNMP

n sysOID contains 1.3.6.1.4.1.193

n Terminal

n show system cli command issued to get the sys oid. Driver is identified if the obtainined sysoidexists in model file.


Configuration capturen Terminal: Telnet , SSH

n running-config : show running-config.

n Startup-config : show startup-config.

Configuration deployn Terminal : Telnet, SSH

n A stored configuration is pushed to the systems running config by opening a command lineinterface session, entering configuration mode, and sending the config line-by-line to thecommand line interface session

Commit confign Terminal : Telnet, SSH


Credential managementn Not Available


VMware, Inc. 353

Device monitoringn configure

n end



n reload

n show system

n show arp

n show ip-route config

n show interfaces status

n show ip route



running Yes Yes CopyTo Start ASCII TELNET, SSH

startup Yes Yes Reboot ASCII TELNET, SSH



ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys Yes Yes

Memory No No

Access Control Lists Match Counts Yes Yes

OSPF Settings No No


VMware, Inc. 354



Routes Yes Yes



VLANs No No


Ericsson ECN Switch

n Ericsson ECN configs cannot be re-entered at a config prompt, because they do not properly exitfrom sub-config modes. This driver will attempt to send an exit command anytime the config parserreceives a comment line in the configuration while the system is at a sub-config prompt.

n On some Ericsson ECN models, the output of show running-config or show startup-config is not avalid config, in that it cannot be re-entered at a config prompt without causing %invalid input errors.Invalid configurations will cause push jobs to fail, and the offending lines must be edited out beforesending the configuration to the device.

Ericsson MSEDDevice Type Router/Edge Device

Specific Model(s) MSED/HL950






Credential Management SNMP V1/V2, Account


Quick Commands Ping

Features available


Auto-Discovery Yes



VMware, Inc. 355



Configlets Yes





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes




n SNMP

n sysDescr contains Ericsson MSED



n ascii running-config :

n config export <filename>

n tftp –i <TFTP server IP> put <filename>

n binary running-config

n config backup <filename>

n tftp –i <TFTP server IP> put <filename>

Configuration deployn Terminal/TFTP:

n running-config :

n tftp –i <TFTP server IP> get <filename>


VMware, Inc. 356

n config restore <filename>


n snmp getc <community string>

n snmp setc <community string>


n end

n reload

n show system info

n config export

n config backup

n config restore



running Yes Yes Copy to Start ASCII TELNET/TFTP,SSH/TFTP



ARP Table No Yes


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory No No


VMware, Inc. 357



OSPF Settings No No


Routes No Yes



VLANs No No


VMware, Inc. 358

Extreme Devices 35This chapter includes the following topics:

n Extreme Switch

n ExtremeWare XOS

Extreme SwitchDevice Type Switch

Specific Model(s)

Summit 2,Summit 3,Summit 4,Summit 4fx,Summit 48,Summit 24,BlackDiamond 6800,Black Diamond 6808,Summit 7iSX,Summit 7iTX,

Summit 1iTX,Summit 5i,Summit 48i,Alpine 3808,Summit 1iSX,Alpine3804,Summit 5iLX,Summit 5iTX,Enet Switch 24 Port,Black Diamond 6816,

Summit 24E3,Alpine 3802,Black Diamond 6804,Summit 48SI,SummitPX1,Summit 24E2TX,Summit 24E2SX


Communication Protocols SNMP/TFTP, TELNET, SSH, TELNET/TFTP


Configuration Change Notification (Events) Syslog, SNMP Trap




Quick Commands Ping, Traceroute, View Routes

Features available


Auto-Discovery Yes



Configlets Yes


VMware, Inc. 359





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes




n SNMP





n Terminal/TFTP

n upload configuration <SERVERIPADDR> <localFile>

n SNMP/TFTP

n Set the following values to the OID .1.3.6.1.4.1.1916.1.10.1.2.1.10.999

n 6 : destroy the existing row

n 5 : create the new row

n 1 : activate the row

n Set .1.3.6.1.4.1.1916.1.10.1.2.1.2.999 to < SERVERIPADDR>

n Set .1.3.6.1.4.1.1916.1.10.1.2.1.3.999 to <tftpFileName>

n Set .1.3.6.1.4.1.1916.1.10.1.2.1.4.999 to

n 4 : uploadConfigImmediate

n Set .1.3.6.1.4.1.1916.1.10.1.2.1.9.999 to "Voyence Control!"


VMware, Inc. 360

n Set .1.3.6.1.4.1.1916.1.10.1.2.1.6.999 to value 1 which started the file transfer.



n SNMP/TFTP

n Set the following values to the OID .1.3.6.1.4.1.1916.1.10.1.2.1.10.999

n 6 : destroy the existing row

n 5 : create the new row

n 1 : activate the row

n Set .1.3.6.1.4.1.1916.1.10.1.2.1.2.999 to < SERVERIPADDR>

n Set .1.3.6.1.4.1.1916.1.10.1.2.1.3.999 to <tftpFileName>

n Set .1.3.6.1.4.1.1916.1.10.1.2.1.4.999 to

n 3 – downloadConfigImmediate

n Set .1.3.6.1.4.1.1916.1.10.1.2.1.9.999 to "Voyence Control!"

n Set .1.3.6.1.4.1.1916.1.10.1.2.1.6.999 to value 1 which started the file transfer



n create account admin <username> <password>

n SNMP

n configure snmp community (readonly | readwrite) <newSnmpCommunity>

Operating Systemn Use image <fileName>

n reboot

Device monitoringn show memory

n ping

n traceroute

n show ip route


VMware, Inc. 361

n extreme


n download image <serverLocation> [all-image] <srcFileName> <dstImage>



running Yes Yes NA ASCII TELNET, SSH,TELNET/TFTP,SSH/TFTP



ARP Table No Yes


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No Yes



VLANs No No



VMware, Inc. 362

Extreme Summit (Model Summit iTx)

n When working with the Extreme Summit device switch, the configuration text lines containing "delete"may cause connectivity loss if used in a Configuration Roll Back. Remove the "delete lines" beforethe Push to avoid loss of connectivity with the device during a Roll Back, or when using Restore torestore an old revision.

Extreme Device - Configuration not changing after Push

n Issue: For Extreme Summit Software Version 6.1.5, configuration changes (pushes) will not take onthe device using the SNMP/TFTP mechanism.

n Resolution: Ensure you use the Telnet or Telnet/TFTP mechanisms for Extreme Summitconfiguration pushes.

Config Push using Telnet to Extreme Switch - Unsuccessful

n Issue: Pushing an entire configuration to the Extreme Switch should not be executed using Telnetunless disable commands (which can potentially stop the management interface) are removedbefore pushing the config.

n For example, for a configuration entry such as, disable ipforwarding vlan Default.

n A disable command in the device configuration takes the form disable string (where stringmay be an interface).

n All disable commands can easily be removed from the device configuration using a texteditor.

You can push a full configuration using the SNMP/TFTP mechanism as a work around.Additionally, you can push configlets to the device.

n Resolution: Use configlets when making changes to the Extreme Summit with Telnet or SSH.

Note SNMP/TFTP can be used for configuration pulls; however, changes cannot be theconfiguration using this mechanism.

ExtremeWare XOSDevice Type Switch

Specific Model(s)BlackDiamond 10808, 12804, Summit X460-24x, Summit X450a-24x, SummitX480-24x-10G4X

Operating System and Firmware Versions 11.3.4.5, 12.6.2.10

Communication Protocols TELNET/TFTP, SSH/TFTP, TELNET, SSH

Configuration Files Content Single XML





VMware, Inc. 363



Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

Syslog No

Rollback Yes

Quick Commands Yes




n SNMP

n sysObjectID contains 1.3.6.1.4.1.1916.2, .1.3.6.1.4.1.1916.2.154 , .1.3.6.1.4.1.1916.2.84, .1.3.6.1.4.1.1916.2.139

n sysDesc contains “ExtremeWare XOS”



n tftp <SERVERIPADDR> -p -l <deviceFilename> -r <filename>


VMware, Inc. 364



n Terminal/TFTP:

n tftp <SERVERIPADDR> -g -l <deviceFilename> -r <fileName>

n use configuration <deviceFilename>


n create account admin <username>

n configure account <oldUser>


n SNMP

n configure snmp add community (readonly | readwrite) <newSnmpCommunity>

n configure snmp delete community (readonly | readwrite) <newSnmpCommunity>

Device monitoringn enable clipaging

n disable clipaging

n show switch

n save configuration <confifFile>

n show account

n show memory



VMware, Inc. 365


running Yes Yes NA Single XML TELNET, SSH,TELNET/TFTP,SSH/TFTP

startup Yes Yes NA Single XML TELNET, SSH,TELNET/TFTP,SSH/TFTP



ARP Table No Yes


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory Yes No


OSPF Settings No No


Routes No No



VLANs No No


ExtremeWare XOS

n Configuration management is not supported if TFTP is not enabled for the device class.

n Configuration pushes have not been certified.


VMware, Inc. 366

F5 Devices 36This chapter includes the following topics:

n F5 Load Balancer Rev 3





F5 Load Balancer Rev 3Device Type Load Balancer

Specific Model(s)Big-IP-HA, Big-IP-LB, Big-IP-3-DNS, Big-IP-FLB, Big-IP-CLB, Big-IP-XLB, Big-IP-SSL

Operating System and Firmware Versions 3.x

Communication Protocols TELNET, SSH, TELNET/FTP, SSH/FTP, SSH/SCP






Quick Commands Ping, Traceorute, View Routes, View Arp, View Interfaces

Features available


Auto-Discovery Yes



Configlets No

VMware, Inc. 367






SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes




n SNMP



Configuration capturen Terminal/TFTP/SCP

n The configuration file units in the package/pkgxml/F5_30/F5_R9.xml file are retrieved using acombination of SSH and SCP commands.


Configuration deployn Terminal/TFTP/SCP

n The configuration file units in the package/pkgxml/F5_9x/F5_R9.xml file are transferred using acombination of SSH and SCP commands.



VMware, Inc. 368


n passwd <username>

n SNMP

n cat /etc/snmpd.conf | sed 's/^ (ro | rw)community <oldSnmpCommunity>/ (ro | rw)community<snmpCommunity>/' > /tmp/snmpd.conf

n cat /etc/snmpd.conf | sed 's/^ (ro | rw)community [[:alnum:]]\\ / (ro | rw)community<snmpCommunity>/' > /tmp/snmpd.conf

n grep -q '^ (ro | rw)community' /tmp/snmpd.conf || echo '(ro | rw)community <snmpCommunity>default .1' >> /tmp/snmpd.conf

n cp -f /tmp/snmpd.conf /etc/snmpd.conf

n /etc/bigstart/scripts/bigsnmpd-ctrl reinit

Device monitoringn bigstart reinit

n df

n mount

n ls

n ifconfig

n ping

n traceroute

n arp

n netstat



/etc/bigip.conf Yes Yes NA ASCII TELNET, SSH,TELNET/FTP,SSH/FTP, SSH/SCP

/etc/bigd.conf Yes Yes NA ASCII TELNET, SSH,TELNET/FTP,SSH/FTP, SSH/SCP


VMware, Inc. 369


/etc/ipfw.conf Yes Yes NA ASCII TELNET, SSH,TELNET/FTP,SSH/FTP, SSH/SCP

/etc/bigip.license Yes Yes NA ASCII TELNET, SSH,TELNET/FTP,SSH/FTP, SSH/SCP

/etc/routes Yes Yes NA ASCII TELNET, SSH,TELNET/FTP,SSH/FTP, SSH/SCP

/etc/bigconfig/openssl.conf

Yes Yes NA ASCII TELNET, SSH,TELNET/FTP,SSH/FTP, SSH/SCP

/etc/bigconfig/users Yes Yes NA ASCII TELNET, SSH,TELNET/FTP,SSH/FTP, SSH/SCP

/etc/bigconf.conf Yes Yes NA ASCII TELNET, SSH,TELNET/FTP,SSH/FTP, SSH/SCP

/etc/passwd Yes Yes NA ASCII TELNET, SSH,TELNET/FTP,SSH/FTP, SSH/SCP

/etc/hosts Yes Yes NA ASCII TELNET, SSH,TELNET/FTP,SSH/FTP, SSH/SCP

/etc/hosts.allow Yes Yes NA ASCII TELNET, SSH,TELNET/FTP,SSH/FTP, SSH/SCP

/etc/rateclass.conf Yes Yes NA ASCII TELNET, SSH,TELNET/FTP,SSH/FTP, SSH/SCP

/etc/ipfwrate.conf Yes Yes NA ASCII TELNET, SSH,TELNET/FTP,SSH/FTP, SSH/SCP

/etc/snmpd.conf Yes Yes NA ASCII TELNET, SSH,TELNET/FTP,SSH/FTP, SSH/SCP

/etc/snmptrap.conf Yes Yes NA ASCII TELNET, SSH,TELNET/FTP,SSH/FTP, SSH/SCP

/etc/sshd_config Yes Yes NA ASCII TELNET, SSH,TELNET/FTP,SSH/FTP, SSH/SCP

/etc/ssh_config Yes Yes NA ASCII TELNET, SSH,TELNET/FTP,SSH/FTP, SSH/SCP


VMware, Inc. 370


/etc/ssh_host_dsa_key Yes Yes NA ASCII TELNET, SSH,TELNET/FTP,SSH/FTP, SSH/SCP

/etc/ssh_host_dsa_key.pub

Yes Yes NA ASCII TELNET, SSH,TELNET/FTP,SSH/FTP, SSH/SCP

/etc/ssh_host_key.pub Yes Yes NA ASCII TELNET, SSH,TELNET/FTP,SSH/FTP, SSH/SCP

/etc/ssh_host_key Yes Yes NA ASCII TELNET, SSH,TELNET/FTP,SSH/FTP, SSH/SCP

/etc/user.db Yes Yes NA ASCII TELNET, SSH,TELNET/FTP,SSH/FTP, SSH/SCP

/etc/ipfw.filt Yes Yes NA ASCII TELNET, SSH,TELNET/FTP,SSH/FTP, SSH/SCP



ARP Table No Yes


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory No Yes


OSPF Settings No No


Routes No Yes



VLANs No No


VMware, Inc. 371


Specific Model(s)BigIP HA, BigIP LB, BigIP 3-DNS, BigIP FLB, BigIP CLB, BigIP XLB, BigIPSSL

Operating System and Firmware Versions Rev 4



Configuration Change Notification (Events) Syslog & Traps




Quick Commands

Ping

Traceroute

View Routes

View Arp

View Interfaces

Features available


Auto-Discovery Yes



Configlets No





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes




VMware, Inc. 372


n SNMP

n ProductCode Oid ".1.3.6.1.4.1.3375.1.1.1.1.5.0" should contain values >1 and <8


Configuration captureThe files listed in the Multi-Config Files section for this device are pulled using a combination of SSH andSCP commands.

Configuration deployThe files listed in the Multi-Config Files section for this device are pushed using a combination of SSHand SCP commands.


n "cat /etc/snmpd.conf | sed 's/^ rocommunity <oldSnmpCommunity> /rocommunity<snmpCommunity>/' > /tmp/snmpd.conf\n"

n "cat /etc/snmpd.conf | sed 's/^ rwcommunity <oldSnmpCommunity> /rwcommunity<snmpCommunity>/' > /tmp/snmpd.conf\n"

n "cat /etc/snmpd.conf | sed 'rocommunity [[:alnum:]]\\+/ rocommunity <snmpCommunity>/'> /tmp/snmpd.conf\n"

n "cat /etc/snmpd.conf | sed 'rwcommunity [[:alnum:]]\\+/ rwcommunity <snmpCommunity>/'> /tmp/snmpd.conf\n"

n "grep -q '^rocommunity' /tmp/snmpd.conf || echo 'rocommunity <snmpCommunity> default .1'>> /tmp/snmpd.conf\n"

n "grep -q '^rwcommunity' /tmp/snmpd.conf || echo 'rwcommunity <snmpCommunity> default .1'>> /tmp/snmpd.conf\n"

n "cp -f /tmp/snmpd.conf /etc/snmpd.conf\n"

n "y"

n "/etc/bigstart/scripts/bigsnmpd-ctrl reinit\n"

n Account

n "passwd <username>"


VMware, Inc. 373

n "<Password>"

Device monitoringn "bigstart reinit"

Multi-config filesFollowing are the files used when storing and revisioning multiple configuration files for multi-configsupport


/config/bigip.conf" Yes Yes NA ASCII Telnet, SSH,Telnet/FTP,SSH/FTP,SSH/SCP

/config/bigip_base.conf"

Yes Yes NA ASCII Telnet, SSH,Telnet/FTP,SSH/FTP,SSH/SCP

/config/ipfw.conf" Yes Yes NA ASCII Telnet, SSH,Telnet/FTP,SSH/FTP,SSH/SCP

/config/bigip.license" Yes Yes NA ASCII Telnet, SSH,Telnet/FTP,SSH/FTP,SSH/SCP

/config/routes Yes Yes NA ASCII Telnet, SSH,Telnet/FTP,SSH/FTP,SSH/SCP

/config/bigconfig/openssl.conf


/config/bigconfig/users Yes Yes NA ASCII Telnet, SSH,Telnet/FTP,SSH/FTP,SSH/SCP

/etc/bigconf.conf Yes Yes NA ASCII Telnet, SSH,Telnet/FTP,SSH/FTP,SSH/SCP

/etc/passwd Yes Yes NA ASCII Telnet, SSH,Telnet/FTP,SSH/FTP,SSH/SCP


VMware, Inc. 374


/etc/hosts Yes Yes NA ASCII Telnet, SSH,Telnet/FTP,SSH/FTP,SSH/SCP

/etc/hosts.allow Yes Yes NA ASCII Telnet, SSH,Telnet/FTP,SSH/FTP,SSH/SCP

/etc/rateclass.conf Yes Yes NA ASCII Telnet, SSH,Telnet/FTP,SSH/FTP,SSH/SCP

/etc/ipfwrate.conf Yes Yes NA ASCII Telnet, SSH,Telnet/FTP,SSH/FTP,SSH/SCP

/etc/snmpd.conf Yes Yes NA ASCII Telnet, SSH,Telnet/FTP,SSH/FTP,SSH/SCP

/etc/snmptrap.conf Yes Yes NA ASCII Telnet, SSH,Telnet/FTP,SSH/FTP,SSH/SCP

/config/ssh/sshd_config Yes Yes NA ASCII Telnet, SSH,Telnet/FTP,SSH/FTP,SSH/SCP

/config/ssh/ssh_config Yes Yes NA ASCII Telnet, SSH,Telnet/FTP,SSH/FTP,SSH/SCP

/config/ssh/ssh_host_dsa_key


/config/ssh/ssh_host_dsa_key.pub


/config/ssh/ssh_host_key.pub



VMware, Inc. 375


/config/ssh/ssh_host_key


/config/user.db Yes Yes NA ASCII Telnet, SSH,Telnet/FTP,SSH/FTP,SSH/SCP

/config/ipfw.filt Yes Yes NA ASCII Telnet, SSH,Telnet/FTP,SSH/FTP,SSH/SCP

Device dataThe following data represents device data per device class


ARP Table Yes Yes


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory No Yes


OSPF Settings No No


Routes No Yes



VLANs No No


Specific Model(s) BIG-IP 1500, BIG-IP 3400,D39


VMware, Inc. 376


Operating systems for BIG-IP 1500 models: 9.1.2.40.6, 9.2.0.167.4,9.2.4.13.1, 9.4.0.517.5

Operating systems for all other models: 9.1.2 40.2

Operating System for BigIP model D39: 9.4.7 320.1

Operating Systems for models C103, C106, D63a, D104, D106, and A107:10.2.0, 10.2.1






Operating System Management Protocols SCP

Quick Commands Ping, View Arp, View Interfaces, View Routes

Features available


Auto-Discovery Yes



Configlets No





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes




n SNMP



VMware, Inc. 377

n Terminal

n OS version is checked using bigpipe version

n Model number is retrieved using:

n "bigpipe platform show" for D39

n "bigpipe platform type" for all other models

n Chassis Serial number is retrieved using:

n "bigpipe platform show" for D39

n "bigpipe platform chassis show" for all other models



n The configuration file units in the package/pkgxml/F5_30/F5_R9.xml file are retrieved using acombination of SSH and SCP commands.


Configuration deployn Terminal/SCP

n The configuration file units in the package/pkgxml/F5_9x/F5_R9.xml file are transferred using acombination of SSH and SCP commands.



n passwd <username>

n SNMP

n cat SnmpConfPath_ | sed 's/^ (ro | rw)community <oldSnmpCommunity>/(ro | rw)community<snmpCommunity>/' > /tmp/snmpd.conf

n cat SnmpConfPath_ | sed 's/^ (ro | rw)community [-_[:alnum:]]\\+/(ro | rw)community<snmpCommunity>/' > /tmp/snmpd.conf



VMware, Inc. 378

n cp -f /tmp/snmpd.conf <SnmpConfPath>

n /usr/bin/bigstart restart snmpd

Operating systemn scp user@name:image /var/tmp/

n ls -l --color=never <imageName>

n MD5 Hash <image>

n local-install

Device monitoringn ifconfig

n ping

n traceroute

n apr

n netstat

n im

n local-install

n ls

n mount

n df




/config/bigip_base.conf Yes Yes NA ASCII SSH/SCP

/config/bigip.conf Yes Yes NA ASCII SSH/SCP

/etc/adjtime Yes Yes NA ASCII SSH/SCP

/etc/host.conf Yes Yes NA ASCII SSH/SCP

/etc/hosts.allow Yes Yes NA ASCII SSH/SCP

/etc/hosts.deny Yes Yes NA ASCII SSH/SCP

/etc/libuser.conf Yes Yes NA ASCII SSH/SCP

/etc/nsswitch.conf Yes Yes NA ASCII SSH/SCP

/etc/passwd Yes Yes NA ASCII SSH/SCP


VMware, Inc. 379



/etc/pwdb.conf Yes Yes NA ASCII SSH/SCP

/etc/resolv.conf Yes Yes NA ASCII SSH/SCP

/etc/shadow Yes Yes NA ASCII SSH/SCP

/etc/sysctl.conf Yes Yes NA ASCII SSH/SCP

/etc/security/time.conf Yes Yes NA ASCII SSH/SCP

/etc/security/pam_env.conf Yes Yes NA ASCII SSH/SCP

/etc/security/limits.conf Yes Yes NA ASCII SSH/SCP

/etc/security/group.conf Yes Yes NA ASCII SSH/SCP

/etc/security/console.perms Yes Yes NA ASCII SSH/SCP

/etc/security/chroot.conf Yes Yes NA ASCII SSH/SCP

/etc/security/access.conf Yes Yes NA ASCII SSH/SCP

/var/named/config/named.conf Yes Yes NA ASCII SSH/SCP

/var/named/config/rndc.key Yes Yes NA ASCII SSH/SCP

/config/ucs_version Yes Yes NA ASCII SSH/SCP

/config/ssl/ssl.crt/default.crt Yes Yes NA ASCII SSH/SCP

/config/ssl/ssl.crt/ca-bundle.crt Yes Yes NA ASCII SSH/SCP

/config/ssl/ssl.csr/default.csr Yes Yes NA ASCII SSH/SCP

/config/bigip/auth/pam.d/ldap/system-auth.conf Yes Yes NA ASCII SSH/SCP

/config/bigip/auth/pam.d/local/system-auth Yes Yes NA ASCII SSH/SCP

/config/bigip/auth/pam.d/radius/system-auth.conf

Yes Yes NA ASCII SSH/SCP

/config/bigip/auth/pam.d/other Yes Yes NA ASCII SSH/SCP

/config/bigip/auth/pam.d/su Yes Yes NA ASCII SSH/SCP

/config/bigip/auth/pam.d/login Yes Yes NA ASCII SSH/SCP

/config/bigip/auth/pam.d/httpd Yes Yes NA ASCII SSH/SCP

/config/bigip/auth/pam.d/sshd Yes Yes NA ASCII SSH/SCP

/config/bigip/auth/pam.d/passwd Yes Yes NA ASCII SSH/SCP

/config/bigip/auth/localusers Yes Yes NA ASCII SSH/SCP

/config/bigip/auth/userroles Yes Yes NA ASCII SSH/SCP

/config/ssh/ssh_config Yes Yes NA ASCII SSH/SCP

/config/ssh/moduli Yes Yes NA ASCII SSH/SCP

/config/ssh/sshd_config Yes Yes NA ASCII SSH/SCP

/config/httpd/conf.d/mod_auth_pam.conf Yes Yes NA ASCII SSH/SCP

/config/httpd/conf/workers2.properties Yes Yes NA ASCII SSH/SCP

/config/net-snmp/snmpd.conf Yes Yes NA ASCII SSH/SCP


VMware, Inc. 380



/config/snmp/subagents.conf Yes Yes NA ASCII SSH/SCP

/config/snmp/snmpd.conf Yes Yes NA ASCII SSH/SCP

/config/big3d/big3d.crt Yes Yes NA ASCII SSH/SCP

/config/big3d/big3d.key Yes Yes NA ASCII SSH/SCP

/config/big3d/big3d.pem Yes Yes NA ASCII SSH/SCP

/config/big3d/big3d.req Yes Yes NA ASCII SSH/SCP

/config/lcd/portinfo.txt Yes Yes NA ASCII SSH/SCP

/config/lcd/lcdinfo.txt Yes Yes NA ASCII SSH/SCP

/config/lcd/ledinfo.txt Yes Yes NA ASCII SSH/SCP

/config/lcd/menus Yes Yes NA ASCII SSH/SCP

/config/lcd/serialinfo.txt Yes Yes NA ASCII SSH/SCP

/config/lcd/screens Yes Yes NA ASCII SSH/SCP

/config/ntp.conf Yes Yes NA ASCII SSH/SCP

/config/eventd.xml Yes Yes NA ASCII SSH/SCP

/config/RegKey.license Yes Yes NA ASCII SSH/SCP



ARP Table Yes Yes


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory Yes Yes


OSPF Settings No No


Routes Yes Yes



VMware, Inc. 381



VLANs No No

Known issuesThe following existing device issues have been discovered with other releases. A resolution is included toaddress the issue, if available.


n User accounts are defined at administrator level.

n Test device for Model D39 did not have the following configuration files and hence the pull for thesefiles will end up with a warning:

n /config/lcd/lcdinfo.txt

n /config/big3d/big3d.key

n /config/lcd/ledinfo.txt

n /config/big3d/big3d.pem

n /config/lcd/serialinfo.txt

n /config/lcd/portinfo.txt

n /config/big3d/big3d.req

n /config/lcd/menus

n /config/big3d/big3d.crt

n /config/RegKey.license

n /config/ucs_version

n Due to lack of device availability during development, operating system version 10 devices arecurrently supported under the version 9 driver class.


Specific Model(s)

C103, Z101,BIG-IP vCMP Guest, BIG-IP VPR-C2400, BIG-IP 3900, BIG-IP2400, BIG-IP 1600 , BIG-IP 3600,F5-BIG-LTM-2000S, BIG-IP Virtual Edition,BIG-IP 4200

Operating System and Firmware Versions 11.1.0 1943.0, 11.4.0.2434.0, 11.5





VMware, Inc. 382




Quick Commands Ping, View ARP, View Interfaces, View Routes

Features available


Auto-Discovery Yes



Configlets No





SNMP Traps No

Syslog No

Rollback Yes

Quick Commands Yes




n SNMP


n Terminal

n OS version is checked using tmsh list cm device

n Model number and chassis serial number are extracted from the same response.



VMware, Inc. 383


n The configuration file units in the package/pkgxml/F5_R11/F5_R11.xml file are retrieved using acombination of SSH and SCP commands.


Configuration deployn Terminal/SCP

n The configuration file units in the package/pkgxml/F5_R11/F5_R11.xml file are transferred using acombination of SSH and SCP commands.



n The root user's password is changed using the native operating system passwd utility.

n SNMP

n cat SnmpConfPath_ | sed 's/^ (ro | rw)community <oldSnmpCommunity>/(ro | rw)community<snmpCommunity>/' > /tmp/snmpd.conf

n cat SnmpConfPath_ | sed 's/^ (ro | rw)community [-_[:alnum:]]\\+/(ro | rw)community<snmpCommunity>/' > /tmp/snmpd.conf


n cp -f /tmp/snmpd.conf <SnmpConfPath>

n /usr/bin/bigstart restart snmpd




/config/bigip_base.conf Yes Yes NA ASCII SSH/SCP

/config/bigip.conf Yes Yes NA ASCII SSH/SCP

/etc/adjtime Yes Yes NA ASCII SSH/SCP

/etc/host.conf Yes Yes NA ASCII SSH/SCP


VMware, Inc. 384



/etc/hosts.allow Yes Yes NA ASCII SSH/SCP

/etc/hosts.deny Yes Yes NA ASCII SSH/SCP

/etc/libuser.conf Yes Yes NA ASCII SSH/SCP



/etc/pwdb.conf Yes Yes NA ASCII SSH/SCP



/etc/sysctl.conf Yes Yes NA ASCII SSH/SCP

/etc/security/time.conf Yes Yes NA ASCII SSH/SCP

/etc/security/pam_env.conf Yes Yes NA ASCII SSH/SCP

/etc/security/limits.conf Yes Yes NA ASCII SSH/SCP

/etc/security/group.conf Yes Yes NA ASCII SSH/SCP

/etc/security/console.perms Yes Yes NA ASCII SSH/SCP

/etc/security/chroot.conf Yes Yes NA ASCII SSH/SCP

/etc/security/access.conf Yes Yes NA ASCII SSH/SCP

/var/named/config/named.conf Yes Yes NA ASCII SSH/SCP

/var/named/config/rndc.key Yes Yes NA ASCII SSH/SCP

/config/ucs_version Yes Yes NA ASCII SSH/SCP

/config/ssl/ssl.crt/default.crt Yes Yes NA ASCII SSH/SCP

/config/ssl/ssl.crt/ca-bundle.crt Yes Yes NA ASCII SSH/SCP

/config/ssl/ssl.csr/default.csr Yes Yes NA ASCII SSH/SCP

/config/bigip/auth/pam.d/ldap/system-auth.conf Yes Yes NA ASCII SSH/SCP

/config/bigip/auth/pam.d/local/system-auth Yes Yes NA ASCII SSH/SCP

/config/bigip/auth/pam.d/radius/system-auth.conf


/config/bigip/auth/pam.d/other Yes Yes NA ASCII SSH/SCP

/config/bigip/auth/pam.d/su Yes Yes NA ASCII SSH/SCP

/config/bigip/auth/pam.d/login Yes Yes NA ASCII SSH/SCP

/config/bigip/auth/pam.d/httpd Yes Yes NA ASCII SSH/SCP

/config/bigip/auth/pam.d/sshd Yes Yes NA ASCII SSH/SCP

/config/bigip/auth/pam.d/passwd Yes Yes NA ASCII SSH/SCP

/config/bigip/auth/localusers Yes Yes NA ASCII SSH/SCP

/config/bigip/auth/userroles Yes Yes NA ASCII SSH/SCP

/config/ssh/ssh_config Yes Yes NA ASCII SSH/SCP


VMware, Inc. 385



/config/ssh/moduli Yes Yes NA ASCII SSH/SCP

/config/ssh/sshd_config Yes Yes NA ASCII SSH/SCP

/config/httpd/conf.d/mod_auth_pam.conf Yes Yes NA ASCII SSH/SCP

/config/httpd/conf/workers2.properties Yes Yes NA ASCII SSH/SCP

/config/net-snmp/snmpd.conf Yes Yes NA ASCII SSH/SCP

/config/snmp/subagents.conf Yes Yes NA ASCII SSH/SCP

/config/snmp/snmpd.conf Yes Yes NA ASCII SSH/SCP

/config/big3d/big3d.crt Yes Yes NA ASCII SSH/SCP

/config/big3d/big3d.key Yes Yes NA ASCII SSH/SCP

/config/big3d/big3d.pem Yes Yes NA ASCII SSH/SCP

/config/big3d/big3d.req Yes Yes NA ASCII SSH/SCP

/config/lcd/portinfo.txt Yes Yes NA ASCII SSH/SCP

/config/lcd/lcdinfo.txt Yes Yes NA ASCII SSH/SCP

/config/lcd/ledinfo.txt Yes Yes NA ASCII SSH/SCP

/config/lcd/menus Yes Yes NA ASCII SSH/SCP

/config/lcd/serialinfo.txt Yes Yes NA ASCII SSH/SCP

/config/lcd/screens Yes Yes NA ASCII SSH/SCP

/config/ntp.conf Yes Yes NA ASCII SSH/SCP

/config/eventd.xml Yes Yes NA ASCII SSH/SCP

/config/RegKey.license Yes Yes NA ASCII SSH/SCP



ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes Yes


OSPF Settings No No


VMware, Inc. 386



Routes Yes Yes



VLANs No No



n The root account is used for device management.

n SNMP credential roll may fail.

F5 Load Balancer Rev 13

Device Type Load Balancer

Specific Model(s) VIPRION 2150 Blade

Operating System and Firmware Versions 13X

Communication Protocols TELNET, SSH, TELNET/FTP, SSH/FTP, SSH/SCP






Quick Commands show running-config, show net arp, show sys memory

Features available


Auto-Discovery Yes



Configlets No




VMware, Inc. 387




SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes




The following information must be available for this driver class to manage an applicable device:

n SNMP


Device operations

The following device operations must be enabled to manage an applicable device using this driver class.





n show net arp

n show sys memory

Multi-config files



running No Yes NA ASCII TELNET,SSH


VMware, Inc. 388

Device data



ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces No Yes

Keys No No

Memory Yes No


OSPF Settings No No


Routes No Yes


No Yes


VLANs No No


VMware, Inc. 389

Force10 Devices 37This chapter includes the following topics:

n Force10 C-Series Router

n Force10 E-Series Router

n Force10 S-Series Router

Force10 C-Series RouterDevice Type Router

Specific Model(s) C150, C300

Operating System and Firmware Versions FTOS v7.9

Communication Protocols SSH, TELNET, SSH/TFTP, TELNET/TFTP, SSH/SCP.




Credential Management SNMP V1, V2, Account, Privilege.


Quick Commands View Interfaces, View ARP, View Routes, Resync

Features available


Auto-Discovery Yes



Configlets Yes




VMware, Inc. 390



SNMP Traps No

Syslog No

Rollback Yes

Quick Commands Yes




n SNMP

n SysOID value contains 1.3.6.1.4.1.6027.1.2

n SysDescr contains Force10 Networks Real Time Operating System Software

n Terminal

n show version command response contains "Force10 Networks Real Time Operating SystemSoftware"

n Presence of device model number in Models.xml file.



n Running-config : show run

n Startup-config : show start

n Terminal/TFTP

n Running-config : copy running-config tftp

n Startup-config : copy startup-config tftp

n SSH/SCP

n Running-config : scp <remote ip>:system:running-config <localfile>

n Startup-config : scp <remote ip>:system:startup-config <localfile>


VMware, Inc. 391


n Device is put in configuration terminal mode and if successful, Configuration(running) is sent lineby line to the device.

n Terminal/TFTP

n Running-config : copy tftp running-config

n Startup-config : copy tftp startup-config

n SSH/SCP

n Startup-config : scp <localfile> remote ip>:system:startup-config


n Copy running-config startup-config


n show run

n snmp-server community

n no snmp-server community

n Account

n aaa new-model


n no username <username> password <password>

n Privilge

n no enable password

n enable password level


n show start

n show version

n show config

n show interfaces


VMware, Inc. 392

n configure term

n terminal length 0

n exit

n reload






n traceroute

n show arp

n show ip route

n ping

n show interface

n show memory

n show file-systems

n show inventory



running Yes Yes Copy To Start,

Reboot

ASCII TELNET,TELNET/TFTP,SSH, SSH/TFTP,SH/SCP

startup Yes Yes Copy To Start,

Reboot




VMware, Inc. 393


ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes Yes


OSPF Settings No No


Routes Yes Yes



VLANs No No

Force10 E-Series RouterDevice Type Router

Specific Model(s) E300, E600, E1200, E600I, E1200I


Communication Protocols SSH, TELNET, SSH/TFTP, TELNET/TFTP, SSH/SCP.




Credential Management SNMP V1, V2, Account, Privilege.


Quick Commands Standard Quick commands, View Interfaces, View ARP, View Routes, Resync

Features available


Auto-Discovery Yes



Configlets Yes


VMware, Inc. 394






SNMP Traps No

Syslog No

Rollback Yes

Quick Commands Yes




n SNMP

n SysOID value contains 1.3.6.1.4.1.6027.1.1

n SysDescr contains Force10 Networks Real Time Operating System Software



n Running-config : show running-config

n Startup-config : show startup-config

n Terminal/TFTP

n Running-config

n copy running-config tftp://<serverIPAddress>/<filename>

n Startup-config

n copy startup-config tftp://<serverIPAddress>/<filename>

n SSH/SCP

n Running-config : scp <remote ip>:system:running-config <localfile>

n Startup-config : scp <remote ip>:system:startup-config <localfile>


VMware, Inc. 395



n Terminal/TFTP

n Running-config : copy tftp running-config

n Startup-config : copy tftp startup-config

n SSH/SCP

n Startup-config : scp <localfile> remote ip>:system:startup-config




n show run

n snmp-server community <newCommunity> <ro | rw>

n no snmp-server community <newCommunity> <ro | rw>

n Account

n aaa new-model



n Privilege




n show start

n show version

n show config

n show interfaces


VMware, Inc. 396

n configure term

n terminal length 0

n exit

n reload






n traceroute

n show arp

n show ip route

n ping

n show interface

n show memory

n show file-systems

n show inventory



Running Yes Yes Copy To Start,

Reboot


Startup Yes Yes Copy To Start,

Reboot




VMware, Inc. 397


ARP Table No Yes


CAM Table No No


Identity No Yes

Interfaces Yes Yes

Keys No No

Memory Yes Yes


OSPF Settings No No


Routes No Yes



VLANs No No

Force10 S-Series RouterDevice Type Router

Specific Model(s)S4810, S2410CP, S2410P, S25, S25V, S25N, S25P , S25P-AC, S50, S50E,S50V, S50N-AC, S50N-DC, S50P-DC, S50N, S6010-ON,I/O Aggregator

Operating System and Firmware Versions FTOS v7.9, 8.3.10.2a

Communication Protocols SSH, TELNET, SSH/TFTP, TELNET/TFTP.




Credential Management SNMP V1/ V2, Account, Privilege


Quick Commands Standard quick commands, View Interfaces, View ARP, View Routes, Resync

Features available


Auto-Discovery Yes




VMware, Inc. 398


Configlets Yes





SNMP Traps No

Syslog No

Rollback Yes

Quick Commands Yes




n SNMP

n SysOID value contains .1.3.6.1.4.1.6027.1.3, .1.3.6.1.4.1.6027. 1.4

n SysDescr contains "Force10 Networks Real Time Operating System"

n Terminal

n Model no. is obtained from show version o/p.

n Presence of device model no. in Models.xml file


Configuration captureFollowing are the commands or processes used to "pull" a configuration from your device.

n Terminal

n Running-config : show running-config

n Startup-config : show startup-config

n Terminal/TFTP

n Running-config



VMware, Inc. 399

n Startup-config




n Terminal/TFTP

n Running-config

n copy tftp://<serverIPAddress>/<filename>running-config

n Startup-config

n copy tftp://<serverIPAddress>/<filename>startup-config




n show run

n snmp-server community <new community> < ro | rw >

n no snmp-server community

n Account

n aaa new-model



n Privilege




n show start

n show version


VMware, Inc. 400

n show config

n show interfaces

n configure term

n terminal length 0

n exit

n reload






n traceroute

n show arp

n show ip route

n ping

n show interface

n show memory

n show file-systems

n show inventory

n show processes memory dir

n show boot system stack-unit all

n show system



Running Yes Yes Copy To Start,

Reboot

ASCII TELNET,TELNET/TFTP,SSH, SSH/TFTP

Startup Yes Yes Copy To Start,

Reboot

ASCII TELNET,TELNET/TFTP,SSH, SSH/TFTP


VMware, Inc. 401



ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes Yes


OSPF Settings No No


Routes Yes Yes



VLANs No No


VMware, Inc. 402

Fortinet Devices 38This chapter includes the following topics:

n Fortinet Fortigate

n Fortinet FortiAnalyzer

Fortinet FortigateDevice Type Router

Specific Model(s)300A, Fortigate-60C, Fortigate-100D,3700D,FortiSwitch-124D,FGT_60D,FORTIGATE-1000D

Operating System and Firmware Versions 4.0.3, v4.0.5, v4.0.0







Quick Commands

View Routes

View Arp

View Interfaces

execute cfg save

Clearv Cache

Features available


Auto-Discovery Yes



Configlets Yes


VMware, Inc. 403





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes




n SNMP




n Term

n "show full-configuration"

n Term/TFTP

n "execute backup full-config tftp <local filename> <server IP address>"


n The config is entered line by line while monitoring responses for error messages.

n Term/TFTP

n "execute restore config tftp <config filename> <Server IP Address>"


n "config user local"


VMware, Inc. 404

n "edit < userName>"

n "set type password"

n "set passwd < password >"

n "set status enable"

n "end"

n "config user local"

n "edit < userName >"

n "set staus disable"

n "end"

Device monitoringn "show ip interface"

n "show port ethernet "

n "execute ping "

n "get router info routing-table all"

n "get router info routing-table static"

n "get system arp"

n "execute traceroute "

n "get system interface"

n "get system status"

n "get system snmp sysinfo"



Running Yes Yes Copy To Start andReboot

ASCII Telnet, SSH,Telnet/TFTP,SSH/TFTP



VMware, Inc. 405


ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes Yes


OSPF Settings No No


Routes Yes Yes



VLANs No No

Known issuesThe following existing device issues have been discovered within other releases. In most cases, aresolution is included to address the issue.

n This driver was built using a model 300A appliance. Fortinet indicates that it should work with mostFortigate models (as of 9/2009).

Fortinet FortiAnalyzer

Device Type Firewall

Specific Model(s) FORTIANALYZER-1000E

Operating System and Firmware Versions v5.6.4-build1678 180515 (GA)







Quick Commands NA


VMware, Inc. 406

FortiAnalyzer-Features available


Auto-Discovery Yes



Configlets No





SNMP Traps Yes

Syslog Yes

Rollback No

Quick Commands No




The following information must be available for this driver class to manage an applicable device.

n SNMP

n sysObjectID should have " 1.3.6.1.4.1.12356"

n Terminal

n Output of "get system status" contains model name.

n Commands get system status should be able to return system properties information.

n sysObjectID value must be mapped by the retrieved model name fromFortinetFortiAnalyzerModels.xml.

Device operations



VMware, Inc. 407

Configuration capture

n Terminal


n "show"

Device monitoring

n "get system status"

n “show”

Multi-config files



Running No Yes NA ASCII Telnet, SSH

Device data



ARP Table No Yes


CAM Table No No


Identity Yes Yes

Interfaces No Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No Yes


Yes Yes


VLANs No No


VMware, Inc. 408

Foundry Devices 39This chapter includes the following topics:

n Foundry EdgeIron

n Foundry B4000

Foundry EdgeIronDevice Type Switch

Specific Model(s) EdgeIron 48G









Features available


Auto-Discovery Yes



Configlets No





SNMP Traps No

VMware, Inc. 409


Syslog No

Rollback No

Quick Commands Yes




n SNMP

n SysDescription should have "EdgeIron" or "Edgeiron" or "edgeiron" or "edgeIron"

n sysObjectID should have "1.3.6.1.4.1.1991.1.5.1.1.4.5.1"





n Term/TFTP

n "copy running-config tftp"

n "copy startup-config tftp"

n Send "<tftp server IP address>"


n "snmp-server community <new Community String>"

n "snmp-server community <new Community String> rw"

n "no snmp-server community <old Community String>"

n Account

n User Account

n "username <new User> access-level 0"

n "username <new User> password 0 <new Password>"


VMware, Inc. 410

n "no username <old User> "

n Global Account

n "line vty"

n "password 0 < new Password>"

n Privilege

n "enable password level 15 0 <newPrivilege Password>"

Device monitoringn "enable"

n "disable"

n "config terminal"

n "end"





Running No Yes No ASCII Telnet, SSH,Telnet/TFTP,SSH/TFTP

Startup No Yes No ASCII Telnet, SSH,Telnet/TFTP,SSH/TFTP



ARP Table No No


CAM Table No No


Identity No Yes

Interfaces No Yes


VMware, Inc. 411


Keys No No

Memory No No


OSPF Settings No No


Routes No No



VLANs No No


Foundry EdgeIron Switch


n Configuration pushes are not supported, and can crash the device used for development. Thefollowing behavior persists through firmware upgrades:

n When pushing commands using the command line interface, the device locks after a number ofInvalid Syntax messages, due to a lack of exit commands (VLAN, Interface, and similarcommands) for ASCII configurations.

n For TFTP, transfer is reported as successful, but the device fails to respond to anycommunication protocols.

n Comment characters, such as !, in the configuration cause warnings when issued using thecommand line interface.

n Certain configuration commands do not merge, and issue Failed to set warnings.

Foundry B4000Device Type Router

Specific Model(s)

BigIron 4000, BigIron RX-4 Router, FastIron 400, FastIron 15000, FastIron800, FastIron SuperX-PREM, FastIron SX 1600-PREM, IronWare, NetIronMLX Router, NetIron MLX Router, ServerIron






VMware, Inc. 412




Quick Commands

Resync

Clear Cache

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes



Discovery/identify deviceThe following information must be available for this driver class to manage an applicable device.

n SNMP

n SysServices should be 0x04 (i.e. Layer 3 device)

n SysDescription should have "Foundry Networks"




VMware, Inc. 413


n Set the following OID's:

n .1.3.6.1.4.1.1991.1.1.2.1.5.0 with "Server IP Address"

n .1.3.6.1.4.1.1991.1.1.2.1.8.0 with "Local filename"

n .1.3.6.1.4.1.1991.1.1.2.1.9.0 with "22" for running configuration

n .1.3.6.1.4.1.1991.1.1.2.1.9.0 with "20" for startup configuration

n Term

n "enable"

n "skip-page"

n "show configuration"

n "show run"

n "page"

n Term/TFTP

n "enable"

n "copy start tftp <Server IP Address> <local filename> "

n "copy run tftp <Server IP Address> <local filename> "

n "exit"


n Set the following OID's:

n .1.3.6.1.4.1.1991.1.1.2.1.5.0 with "Server IP Address"

n .1.3.6.1.4.1.1991.1.1.2.1.8.0 with "Local filename"

n .1.3.6.1.4.1.1991.1.1.2.1.9.0 with "23" for running configuration

n .1.3.6.1.4.1.1991.1.1.2.1.9.0 with "21" for startup configuration

n Term

n "enable"

n "conf t"

n Send configuration line by line to the device as commands


VMware, Inc. 414

n Term/TFTP

n "enable"

n "copy tftp running-config <Server IP Address> <Local Configuration File>"

n "copy tftp startup-config <Server IP Address> <Local Configuration File>"

n "Y"


n "config terminal"

n "snmp-server community <new SNMP Community> RO"

n "snmp-server community <new SNMP Community> RW"

n "no snmp-server community <old Community string> RO"

n "no snmp-server community <old Community string> RW"

n "exit"

n Account

n "config terminal"

n "username <username> password < password >"

n "no username < oldUser >"

n "exit"

n Privilege

n "config terminal"

n "enable super-user-password < newPrivilege Password >"

n "no enable super-user-password < new Privilege Password >"

n "exit"


n "disable"

n "reload"

n "write mem"

n "conf t"

n "exit"


VMware, Inc. 415



Running Yes Yes Copy To Start ASCII SNMP/TFTP, Telnet,SSH, Telnet/TFTP,SSH/TFTP

Startup Yes Yes Reboot ASCII SNMP/TFTP, Telnet,SSH, Telnet/TFTP,SSH/TFTP



ARP Table No Yes


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No Yes



VLANs No No


VMware, Inc. 416

GE Devices 40This chapter contains the following topics:

n GE MDS Access Point and Remote

GE MDS Access Point and RemoteDevice Type Router

Specific Model(s) MDS Mercury 3650

Operating System and Firmware Versions aw20100512_01

Communication Protocols SNMP/TFTP, Telnet, SSH, Telnet/TFTP







Features available


Auto-Discovery Yes



Configlets No





SNMP Traps Yes

Syslog Yes

VMware, Inc. 417


Rollback No

Quick Commands No




n SNMP

n sysObjectID should contain "1.3.6.1.4.1.4130.2.1.1.5"

n Should be able to retrieve Serial Number from "1.3.6.1.4.1.4130.2.1.4.2.3"



n Set ".1.3.6.1.4.1.4130.2.1.4.2.56.0" to <Server IP Address>

n Set ".1.3.6.1.4.1.4130.2.1.4.2.62.0" to <local file name>

n Set ".1.3.6.1.4.1.4130.2.1.4.2.63.0" to "3"(send).

n Check ".1.3.6.1.4.1.4130.2.1.4.2.64.0" for status of TFTP operation

n Term/TFTP

n Using the "Configuration Scripts Menu" of the device set the following,

n Set TFTP Host Address to <Server IP Address>

n Set Config Filename to <local file name>

n Set Send File to Y

n Check "Send File" for status of completion


n Set ".1.3.6.1.4.1.4130.2.1.4.2.56.0" to <Server IP Address>

n Set ".1.3.6.1.4.1.4130.2.1.4.2.62.0" to <configuration file name>

n Set ".1.3.6.1.4.1.4130.2.1.4.2.63.0" to "2"(receive).


VMware, Inc. 418

n Check ".1.3.6.1.4.1.4130.2.1.4.2.65.0" for status of TFTP operation

n Term/TFTP


n Set "TFTP Host Address" to <Server IP Address>

n Set "Config Filename" to <config file name>

n Set "Retrieve File" to Y

n Check "Retrieve File" for status of completion


n At "SNMP Agent Config Menu" set the following

n Set "A) Read Community" for <new Community String>

n Set "B) Write Community" for <new Community String>

n Account(Only Password change)

n At "User Passwords Menu" set the following,

n Set "A) Change Admin Password" for <new Password>



Text Configuration Yes Yes NA ASCII SNMP/TFTP,Telnet/TFTP



ARP Table No Yes


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No


VMware, Inc. 419


Memory No No


OSPF Settings No No


Routes No No



VLANs No No


n GE MDS Access Point and Remote devices can only be discovered by SNMP.

n Push and pull are only supported through SNMP.

n For configuration pushes and pulls, two directories must be created in the /tftpboot/ directory. Forexample, /tftpboot/backup/ and /tftpboot/restore/.


VMware, Inc. 420

Gigamon Devices 41This chapter includes the following topics:

n Gigamon Switch

n Gigamon 4.7

Gigamon SwitchDevice Type Switch

Specific Model(s) GigaVUE-MP, GigaVUE-2404

Operating System and Firmware Versions 5.0.17, 7.1.03, 8.2.01







Quick Commands

Ping

View Interfaces

Features available


Auto-Discovery Yes



Configlets No





VMware, Inc. 421


SNMP Traps No

Syslog No

Rollback Yes

Quick Commands Yes




n SNMP

n SysObjectID must contain "1.3.6.1.4.1.26866"

n Hostname, device properties, and interfaces must be successfully retrieved or discovery isaborted.

n Term


n Model must map to sysObjectID in GigamonModels.xml.


Configuration capturen Terminal (report running or report startup):

n "config save <file name>"

n "show file <file name>"

n "delete file < filename >"

n Terminal/TFTP (running or startup)

n "config save <file name>"

n "show file <file name>"

n "upload -cfg <filename> <Server IP Address> <remotefilename>"


n Send configuration line by line as device commands.


VMware, Inc. 422

n Term/TFTP

n "install -cfg <Configuration filename> <Server IP Address>"

n "config restore < filename >" for running config

n "config file <filename> nb" for startup config


n "config snmp_server community < new Community String >"

n Account

n "show rad_server"

n "show tac_server"

n "config password user <oldUser> password < password> "

n "config user <username>password <password> level super"

n "delete user < oldUser >"

Device monitoringn "show system"

n "reboot"

n "show port-params all"

n "show file"



Report running No Yes NA ASCII Telnet, SSH

report startup No Yes NA ASCII Telnet, SSH

running Yes Yes Copy To Start Binary Telnet/TFTP,SSH/TFTP

startup Yes Yes Reboot Binary Telnet/TFTP,SSH/TFTP



VMware, Inc. 423


ARP Table No No


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No No



VLANs No No


n The following hardware information is not reported by the device; memory and file system informationare disabled in the device package:

n Memory

n File system information

n Inventory (SNMP)

n IP addresses (SNMP)

n The model name is now obtained from the GIGAMON-SNMP-MIB for SNMP (falling back to standardoids for pre 8.x firmware), and the device banner for terminal. If the banner is customized, this mayprevent mapping to a sysObjectID value in the GigamonModels.xml, and fail device discovery viaterminal protocols.

n If the device is completely unmanaged and later rediscovered, the startup file set for the currentmanagement instance will change. The previous file must be deleted manually after a successfulpush to startup following rediscovery, since the Device ID (which is part of the filename) will havechanged. This approach is required due to the lack of vendor support for specifying the source anddestination filenames for the install –cfg command.


VMware, Inc. 424

n Configlets and remediation are not supported by this device class, since the text representation of theconfiguration cannot be pushed to the device, which is a preprequisite for configlet pushes.

n The managed device model(s) appear to only support a single read-only community string.

n The show diag command has been observed to disconnect communication sessions with the deviceafter partial output. As a result, some diagnostic information that may assist with resolving missinghardware information is currently unavailable to the driver.

Gigamon 4.7Device Type Switch

Specific Model(s) HB1/HC2

Operating System and Firmware Versions GigaVUE-OS 4.7.01 Build

Communication Protocols Telnet, SSH, SNMP



Discovery/Identify Methods SNMP, SSH



Quick Commands Ping,Interfaces,Arp, Routes

Features available


Auto-Discovery Yes



Configlets No





SNMP Traps No

Syslog No

Rollback No

Quick Commands Yes




VMware, Inc. 425


n SNMP




n Config dump

Device monitoringn "ping"

n "show interface status"



ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces No Yes

Keys No No

Memory Yes No


OSPF Settings No No


Routes Yes Yes



VLANs No No


VMware, Inc. 426

H3C Devices 42This chapter includes the following topics:

n H3C Switch

n H3C Router

H3C SwitchDevice Type Switch

Specific Model(s) S5820X-28S, S5120-52C-PWR-EI, S5800-32C-PWR


Communication Protocols SSH, Telnet, SSH/TFTP, SNMP





Quick Commands

View Arp

View Interfaces

Ping

Traceroute

Features available


Auto-Discovery Yes



Configlets Yes




VMware, Inc. 427



SNMP Traps No

Syslog No

Rollback No

Quick Commands Yes




n SNMP

n SysObjectID should contain "1.3.6.1.4.1.25506"

n SysDescription should contain "H3C"

n Terminal

n Output of “display device manuinfo” contains model name and serial number.

n Output of “display version” contains the software version.



n "display current-configuration"

n "display saved-configuration"

n Term/TFTP

n "backup startup-configuration to <SERVERIPADDR> <LOCALFILE>"


n issue command “save force”

n Push by sending each line through the command-line interface



VMware, Inc. 428

Credential Managementn SNMP v1/v2

n "snmp-agent community read <newCommunity>"

n "snmp-agent community write <newCommunity> "

n "undo snmp-agent community read <oldCommunity>"

n Account

n "local-user <user> +password simple <password> +authorization-attribute level 3 +service-typetelnet +service-type ssh"

n "undo local-user <user>"

Device monitoringn "display device manuinfo"

n "save force"

n "quit"

n "system-view"

n "display version"



n "screen-length disable"

n "reboot"

n "display arp"

n "display ip routing-table"

n "display interfaces"



Running Configuration Yes Yes Copy To Start ASCII SSH, Telnet

Startup Configuration Yes Yes NA ASCII Telnet/TFTP,SSH/TFTP


VMware, Inc. 429



ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes Yes


OSPF Settings No No


Routes Yes Yes



VLANs No No


n TFTP has not been tested

H3C RouterDevice Type Router

Specific Model(s) MSR20-20







VMware, Inc. 430


Quick Commands

View Arp

View Interfaces

Ping

Traceroute

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

Syslog No

Rollback No

Quick Commands Yes




n SNMP

n SysObjectID should contain "1.3.6.1.4.1.25506"

n SysDescription should contain "H3C"

n Terminal





VMware, Inc. 431




n Term/TFTP










n Account




n "save force"

n "quit"

n "system-view"

n "display version"





VMware, Inc. 432

n "reboot"

n "display arp"









ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes Yes


OSPF Settings No No


Routes Yes Yes



VLANs No No


VMware, Inc. 433




VMware, Inc. 434

Hirschmann Devices 43This chapter contains the following topics:

n Hirschmann Rail Switch

Hirschmann Rail SwitchDevice Type Switch

Specific Model(s) Hirschmann Railswitch, Hirschmann PowerMice

Operating System and Firmware Versions L2E-07.1.01, L2P-07.1.05

Communication Protocols SSH/Telnet, SSH/TFTP, Telnet/TFTP






Quick Commands ARP, Interface, Routes

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

Syslog No

VMware, Inc. 435


Rollback No

Quick Commands Yes




n SNMP

n SysObjectID must contain "1.3.6.1.4.1.248.14.10"

n sysDescr contains "Hirschmann railswitch" or "Hirschmann PowerMICE"

n OS version is available from .1.3.6.1.4.1.248.14.1.1.2.0 OID

n Term

n Output of "show sysinfo" contains model name and serial number.

n Output of "show sysinfo" contains hostname of the device.

n Output of "show sysinfo" contains the software version.




n Term/TFTP

n copy system:running-config tftp://<SERVERIPADDR>/<LOCALFILE>

n copy nvram:startup-config tftp://<SERVERIPADDR>/<LOCALFILE>


n Issue command system paste-config start



n Issue command system paste-config stop


VMware, Inc. 436

n Term/TFTP

n copy tftp://<SERVERIPADDR>/<REMOTEFILE> system:running-config

n copy tftp://<SERVERIPADDR>/<REMOTEFILE> nvram:startup-config


n snmp-server community <newCommunity>

n snmp-server community <newCommunity>


n Account – Credential roll is not supported as of now.

Device monitoringn Show sysinfo

n copy system:running-config nvram:startup-config

n enable

n exit

n configure

n show arp switch

n show interface ethernet switchport

n reboot




running Yes Yes TEXT SSH,Telnet,SSH/TFTp.Telnet/TFTP

startup Yes Yes TEXT SSH,Telnet/TFTP,SSH/TFTP



VMware, Inc. 437


ARP Table No Yes


CAM Table No No


Identity Yes Yes

Interfaces No Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No Yes



VLANs No No



n Account credential role is not supported.


VMware, Inc. 438

HP Devices 44This chapter includes the following topics:

n HP GbE2c BladeSwitch

n HP ProCurve Switch

n HP 3600V2 Switch

n HP 3600V2 Router

HP GbE2c BladeSwitchDevice Type Switch

Specific Model(s) GbE2c








Quick Commands

View Routes

View Interfaces

Resync

Features available


Auto-Discovery Yes



Configlets No


VMware, Inc. 439





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes




n SNMP

n SysObjectID should contain "1.3.6.1.4.1.11.2.3.7.11.33.[4-6].1.1"

n SysDescription should contain "GbE2c.+Ethernet Blade Switch for HP"




n "show active-config"

n "show backup-config"

n Term/TFTP

n "copy running-config tftp address <SERVERIPADDR> filename <LOCALFILE>"

n "copy active-config tftp://<SERVERIPADDR>/<LOCALFILE>"

n "copy backup-config tftp://<SERVERIPADDR>/<LOCALFILE>"


n Configuration can be send line by line to the device as device command



VMware, Inc. 440

n Term/TFTP

n "copy tftp running-config address <SERVERIPADDR> filename <config filename> "

n "y"


n Note

n Optionally, the copy running-config active-config command can be issued following aconfiguration deployment. This command copies the previous active configuration to the backupconfiguration.


n "enable"

n "snmp-server read-community < new SnmpCommunity >"

n "snmp-server write-community < new SnmpCommunity >"

n Account

n "enable"


n "show access user"

n "access user user-password"

n "access user operator-password"

n "access user adminstrator-password"

n <password>

n "no access user <oldUserNum> enable"

n "end"

n "access user <enableUser> name < userName >"

n "access user <enableUser > level admin"

n "access user <enableUser > password"

n <password>

n "access user <enableUser> enable"

n "no access user <disableUser> enable"

n "end"


VMware, Inc. 441

Device monitoringn "show interface info"

n "show interface link"

n "show interface portchan info"

n "show interface portchan link"

n "show ip route"

n "terminal-length "

n "enable"

n "disable"

n "show sys-info"

n "show snmp"



running Yes Yes Copy To Start ASCII SSH, Telnet,SSH/TFTP,Telnet/TFTP

active Yes Yes NA ASCII Telnet, SSH

backup Yes Yes NA ASCII Telnet, SSH



ARP Table No Yes


CAM Table No No


Identity No Yes

Interfaces Yes Yes

Keys No No

Memory Yes Yes



VMware, Inc. 442


OSPF Settings No No


Routes Yes Yes



VLANs No No


n When sending a config line by line using Telnet or SSH, sending an ip-mgmt interface addresscommand causes the terminal session to drop. Due to this, the driver will intentionally filter out anyconfiguration line that starts with ip-mgmt interface address when sending in line by line mode.

n When sending a config line by line using Telnet or SSH, it is not clear whether commands that changepasswords are processed correctly because password commands in the command-line interface arenormally interactive. Due to this, any job that sends a password command line by line receives awarning message. The command is sent but the job result will note that the command may not beprocessed correctly.

n The local AAA system only supports a total of 10 user accounts. When rolling users/passwords, if thenew user does not already exist, the driver first attempts to reuse the old user account if it exists. Ifthe old user account does not exist, the driver looks for one available user account out of the possible10. If there are no available user accounts, no changes are made and the job will fail.

n The HP GbE2c Bladeswitch has console logging enabled by default and sends console messagesimmediately upon login. This can cause automated logins to fail in certain circumstances. It isadvisable to permanently turn off console logging on any GbE2c device that is to be managed. Inmost cases the driver still manages to login, but the messages slow down the login proceduredramatically. For best performance, turn off console logging permanently using the following:


n no logging console

n end

n save running-config startup-config


VMware, Inc. 443

HP ProCurve SwitchDevice Type Switch

Specific Model(s)

J3245A ProCurve Switch 800T, J3245A ProCurve Switch 200, J4850AProCurve Switch 5304XL, J3288A ProCurve 10/100 Hub 12M, J4865AProCurve Switch 4108GL, J3245A ProCurve Switch 212M, J3299A, J4899AProCurve Switch 4874A, J4899A ProCurve Switch 2650, J4120A ProCurveSwitch 1600M, J4122A ProCurve Switch 2400M, J4093A ProCurve Switch2424M, J4812A ProCurve Switch 2512, J4813A. J4899B ProCurve Switch2650, J4900 ProCurve Switch 2626, ProCurve Switch Unknown, ProCurveSwitch 2000, ProCurve Switch 2000B, ProCurve Switch 2524, ProCurveSwitch A6713A, ProCurve Switch A6716A, ProCurve Switch A6717A,ProCurve Switch 4104GL, ProCurve Switch 224M, ProCurve Switch J4902,ProCurve Switch J4903A, ProCurve Switch J4904A, ProCurve Switch Proliant,ProCurve Switch J4900A, ProCurve Switch J8165A, ProCurve Switch J8164A,ProCurve Switch J8130A, ProCurve Switch J8133A, ProCurve Switch J8153A,ProCurve Switch J8154A, ProCurve Switch J8155A, ProCurve Switch J4905A,ProCurve Switch J4906A, ProCurve Switch J8718A, ProCurve Switch J8719A,ProCurve Switch J8433A, ProCurve Switch J8474A, 9308 Routing Switch,9304 Routing Switch, 5308 Routing Switch, 6208 Routing Switch, 5308XLProCurve Switch HP Ether Switch


Operating systems for 2600 series models: H.10.31, H.10.35, H.10.43

Operating systems for 3500-YLseries models: K.11.69, K.12.02, K.12.05

Operating systems for 5300-XL series models: E.10.55, E.10.61

Communication Protocols Telnet, SSH, Telnet/TFTP, SSH/SCP




Credential Management SNMP v1/v2, V3, Account


Quick Commands

Ping

Traceroute

Ping Device

Features available


Auto-Discovery Yes



Configlets Yes




VMware, Inc. 444




SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes




n SNMP

n SysDescription must contain "ProCurve"

n SysObjectID must contain "1.3.6.1.4.1.11.2.3.7.11"



n "show config"

n "show run"

n SCP

n Running config and Startup config can be pulled using SCP.


n Configuration can be send line by line as device commands

n Term/TFTP

n "copy tftp startup-config "<SERVERIPADDR> <Config filename>"

n "y"

n "exit"


VMware, Inc. 445


n "no snmp-server community < old Snmp Community>"

n "snmp-server community <newSnmpRWCommunity> Manager unrestricted"

n "snmp-server community <new SnmpROCommunity> Manager restricted"

n Account

n "conf t"

n "password manager user-name <username>"

n "password manager"

n "<password>"

n "exit"

Operating System managementn Via SCP/FTP

n "show version"

n Retrieve image using SCP/FTP from image Server

n SCP put the retrieved image on the device

n Wait till device Reboot

n Via TFTP

n "show version"

n "copy tftp flash <tftpServer> <imageName> <destFlash> "

n destFlash value can be either "primary" or "secondary"

n "y"

n Wait till device Reboot

Device Monitoringn banner

n boot system flash destFlash


n no page

n show config

n show flash


VMware, Inc. 446

n show running

n show ver

n show version

n terminal width

n write memory

n reload

n ping

n traceroute



running Yes Yes Copy To Start ASCII Telnet, SSH,SSH/SCP

Startup Yes Yes NA ASCII Telnet, SSH,SSH/SCP



ARP Table Yes No


CAM Table No No


Identity No Yes

Interfaces Yes No

Keys Yes No

Memory No Yes




Routes Yes No



VMware, Inc. 447



VLANs No No


HP ProCurve 2650 - Invalid Command ip proxy-arp

n The configuration command for the default VLAN does not process correctly. This is an issue for allpush types. A Push, using the terminal protocol, provides a warning but cannot be used for Push toStart.

This error has been ignored for pushes to the running configuration but can not be ignored for a Pushto Start, using TFTP.

n HP 2650# sh ver

Image stamp: /sw/code/build/fish(ts_08_5)

May 26 2005 17:11:52

H.08.69

973

Boot Image: Primary

VLAN 1

name "DEFAULT_VLAN"

untagged 1-47,50-Trk1

ip address 172.18.1.1 255.255.255.0

ip proxy-arp

exit

Failed during execution

Line=exit

Error In Configuration File On Line #21

Invalid input: proxy-arp

Error: Push Failed, Pull Succeeded

HP 2650# copy start tftp 192.168.1.1 hp1

HP 2650# copy tftp start 192.168.1.1 hp1

Device may be rebooted, do you want to continue [y/n]? y


VMware, Inc. 448

line: 22. Invalid input: proxy-arp

HP ProCurve 2650 - Push to Start causes Reboot

n The device can reboot after a Push to Start.

n HP 2650# copy tftp start 192.168.1.1 hp1

Device may be rebooted, do you want to continue [y/n]? y

Rebooting switch...

The ProCurve 2650 switch may reboot after a Push to Start.

HP ProCurve

n The HP Switch does not support Non-SNMP Management. For manageability, ensure that SNMP isturned On.

HP Switch - Configuration Pushes

n Issue: Configuration pushes executed to the HP switch using the push types Push to Run and Pushto Run Copy Start may fail, due to line entries within the device configuration which contain thedelete command.

n Resolution: Remove lines from the configuration that may issue delete commands before pushingthe configuration.

n RollBack

n When pushing a configuration to the HP switch, to remove lines from the configuration, that linemust be prefixed with the word no.

n For example:

ip default-gateway 172.17.0.1

snmp-server community "public" Operator Unrestricted

snmp-server community "Cust3"

n To remove "public" you need to push the following:

ip default-gateway 172.17.0.1

no snmp-server community "public" Operator Unrestricted

snmp-server community "Cust3"

Note that the second line snmp-server community "public", Operator Unrestricted is removed byprefixing the line with no, and then pushing the configuration. For lines which contain delete,follow the same procedure.

HP ProCurve 2626 and 3500-ly

n Configuration management using SCP

n This capability is OS-dependent. Consult the applicable device documentation for details. Forcertain versions, SFTP (currently unsupported) is available, but SCP is not.


VMware, Inc. 449

n OS Upgrades using SCP

n Image transfers generally succeed, but the devices fail to acknowledge the end-of-file sequence,leaving subsequent terminal sessions unable to complete the reload procedure. This can take theform of unresponsive SSH sessions or an indication that a transfer is still in progress. In somecases, the image file may also be truncated. A cold boot is the only current workaround.

HP 3600V2 SwitchDevice Type Switch

Specific Model(s)

A3600-48-POE,A5800-24G

5800-24G-POE

1810-24G

5700-40XG-2QSFP+







Quick Commands

View Arp

View Interfaces

Ping

Traceroute

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

Syslog No

Rollback No

Quick Commands Yes


VMware, Inc. 450





n SNMP

n SysObjectID should contain "1.3.6.1.4.1.25506.11.1.98"

n SysDescription should contain "HP A3600"

n Terminal







n Term/TFTP










VMware, Inc. 451


n Account




n "save force"

n "quit"

n "system-view"

n "display version"




n "reboot"

n "display arp"









ARP Table Yes Yes


CAM Table No No


VMware, Inc. 452



Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes Yes


OSPF Settings No No


Routes Yes Yes



VLANs No No



HP 3600V2 RouterDevice Type Router

Specific Model(s) A-MSR900 , A-MSR20-11, A-MSR920


Communication Protocols TELNET, SSH,SNMP , TELNET/TFTP , SSH/TFTP






Quick Commands Ping,Interfaces,Arp, Routes ,Traceroute and Resync

Features available


Auto-Discovery Yes



VMware, Inc. 453



Configlets No





SNMP Traps No

Syslog No

Rollback No

Quick Commands Yes




n SNMP


n SysDescription should contain "HP"

n Terminal





n display current-configuration

n display saved-configuration"Configuration Deploy

n Term/TFTP

n backup startup-configuration to <SERVERIPADDR> <LOCALFILE>


VMware, Inc. 454


n Issue command “save force”







n Account




n "save force"

n "quit"

n "system-view"

n "display version"




n "reboot"

n "display arp"




VMware, Inc. 455



Running Configuration Yes Yes NA ASCII SSH, Telnet

Startup Configuration Yes Yes NA ASCII SSH, Telnet



ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes Yes


OSPF Settings No No


Routes Yes Yes



VLANs No No


VMware, Inc. 456

Huawei Devices 45This chapter includes the following topics:

n Huawei Router

n Huawei Switch

n Huawei SmartAX

Huawei RouterDevice Type Switch

Specific Model(s) AR19-10, AR19-13, AR19-15, AR29-21, AR49-45 NE40-E, NE40-4, NE80


For NE40-E, NE40-4, NE80: VRP 5.30, NE40:VRP5.130

For AR19-10, AR19-13, AR19-15, AR29-21, AR49-45:VRP 5.20

Communication Protocols Telnet, SSH, SSH/FTP, Telnet/FTP







Features available


Auto-Discovery Yes



Configlets Yes




VMware, Inc. 457



SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes




n SNMP


n SysDescription must contain "VRP" or "Versatile Routing Platform" or "Quidway"

n PackageID should be retrievable from the model no.

n Term

n Result of display version should have "Versatile Routing Platform" or "VRP"

n Host name must be retrieved from display current-configuration command

n Model name must be retrieved form display version command and that should resolve to thePackage ID





n Term/FTP

n "save <config filename.cfg>" for ASCII

n "save <config filename.zip>" for Binary

n "Y"

n "display startup"

n FTP the configuration file.


VMware, Inc. 458


n "system-view"


n "save"

n Term/TFTP

n "display startup"

n FTP the configuration file

n "startup saved-configuration < pushed Config Filename >"

n "reboot"


n "system-view"

n "undo snmp-agent community < old Snmp Community >"

n "undo snmp-agent community read < old Snmp Community >"

n "undo snmp-agent community write < old Snmp Community >"

n "snmp-agent community read < new Snmp Community >"

n "snmp-agent community write < new Snmp Community >"

n Account

n "system-view"

n "aaa"

n "local-user <username> password simple/cipher < password >"

n "local-user <username> service-type < protocol>"

n "local-user <username> level 15"

n "undo local-user < oldUser >"

n "local-user < userName >"

n "password simple < password >"

n "service-type < protocol >"

n "level 3"

n "quit"


VMware, Inc. 459

Device monitoringn "display acl config all"

n "display acl all"

n "display startup"

n "ping "

n "tracert "

n "dir "

n "display version"

n "display ip interface brief"



n "user-interface "

n "screen-length "

n "display arp all"

n "display vlan"

n "display vlan all"

n "display interface"

n "display mac-address"

n "display ospf brief"



Current Yes Yes CopyToSaved ASCII Telnet, SSH

Saved Yes Yes Reboot ASCII Telnet, SSH

Current-binary Yes Yes Reboot Binary SSH/FTP,Telnet/FTP

Saved-binary Yes Yes Reboot Binary SSH/FTP,Telnet/FTP



VMware, Inc. 460


ARP Table Yes No


CAM Table Yes No


Identity Yes Yes

Interfaces Yes No

Keys No No

Memory Yes No




Routes Yes Yes



VLANs Yes No


n Huawei devices do not support FTP or Telnet/SSH access from the same account. FTP access ishardcoded in the driver. For FTP configuration to work an FTP login emcftp with passwordemctester must exist.

n Some configuration commands may cause a premature connection failure and fail the push job whenpushed to the NE-series routers. For example, the shutdown command for interfaces.

n Some router configurations may show out-of-sync indications, when no visual differences are shown.This is due to random spaces introduced by the device after Terminal pulls.

n Configuration pull and push:

n Configuration pull and push is done using FTP for devices that support binary(.zip) configurations.

n Configuration pull and push is done using Terminal for devices that support text (.cfg)configurations.

n Configuration pull and push is done using FTP for devices that support both binary(.zip) andtext(.cfg) configurations.

n Serial number and physical hardware are not available using terminal.

n Memory, file systetm information, and interfaces are not supported using SNMP.


VMware, Inc. 461

Huawei SwitchDevice Type Switch

Specific Model(s)

S2326TP-SI, S2326TP-PWR-SI, S3352P-SI, S3352P-PWR-EI, S3352P-EI-24S, S3552, S5324TP-SI, S5324TP-PWR-SI, S5328C-EI-24S, S5328C-EI,S5348TP-SI, S5352C-PWR-SI, S5652 S8500, S8505, S6503, , S9303, S9303Terabit Routing Switch, S9306, S9306 Terabit Routing Switch, S9312,S3352P-EI-48S, S3328TP-EI-24S,S7706


For S3552: VRP 5.20

For S2326, S3352, S5324, S5328, S5352, S5348, S5652: VRP 5.30

For S8500, S8505: VRP 3.10

For S9303, S9303 Terabit Routing Switch, S9306, S9306 Terabit RoutingSwitch, S9312: VRP 5.7

Communication Protocols Telnet, SSH, SSH/FTP, Telnet/FTP







Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes




VMware, Inc. 462


n SNMP


n SysDescription must contain "VRP" or Versatile Routing Platform" or "Quidway"

n PackageID should be retrievable from the model no.

n Term

n Result of display version should have "Versatile Routing Platform" or "VRP"

n Host name must be retrieved from display current-configuration command

n Model name must be retrieved form display version command and that should resolve to thePackage ID





n Term/FTP

n "save <config filename.cfg>" for ASCII

n "save <config filename.zip>" for Binary

n "Y"

n "display startup"

n FTP the configuration file.


n "system-view"


n "save"

n Term/TFTP

n "display startup"


VMware, Inc. 463

n FTP the configuration file

n "startup saved-configuration < pushed Config Filename >"

n "reboot"


n "system-view"

n "undo snmp-agent community < old Snmp Community >"

n "undo snmp-agent community read < old Snmp Community >"

n "undo snmp-agent community write < old Snmp Community >"

n "snmp-agent community read < new Snmp Community >"

n "snmp-agent community write < new Snmp Community >"

n Account

n "system-view"

n "local-user < userName >"

n "password simple < password >"

n "service-type < protocol >"

n "level 3"

n "quit"

n "aaa"

n "local-user <username> password simple < password >"

n "local-user <username> service-type < protocol>"

n "local-user <username> level 15"

n "undo local-user < oldUser >"

Device monitoringn "display acl config all"

n "display acl all"

n "display startup"

n "ping "

n "tracert "

n "dir "

n "display version"


VMware, Inc. 464

n "display ip interface brief"



n "user-interface "

n "screen-length "

n "display arp all"

n "display vlan"

n "display vlan all"

n "display interface"

n "display mac-address"

n "display ospf brief"



Current Yes Yes copyToSaved ASCII Telnet, SSH

Saved Yes Yes Reboot ASCII Telnet, SSH

Current-binary Yes Yes Reboot Binary SSH/FTP,Telnet/FTP

Saved-binary Yes Yes Reboot Binary SSH/FTP,Telnet/FTP



ARP Table Yes No


CAM Table Yes No


Identity Yes Yes

Interfaces Yes No

Keys No No

Memory Yes No


VMware, Inc. 465





Routes Yes Yes



VLANs Yes No

Known issuesThe following existing device issues have been discovered with other releases. In most cases, aresolution is included to address the issue.

n Huawei devices do not support FTP or Telnet/SSH access from the same account. FTP access ishardcoded in the driver. For FTP configuration to work an FTP login emcftp with passwordemctester must exist.

n For S2326TP-SI, S2326TP-PWR-EI, S3352P-PWR-EI, S5324TP-PWR-SI, and S5352C-PWR-SImodels, configuration files are saved in zipped format. These configurations cannot be viewed in theuser interface, but backup and restore operation can be performed.

n Configuration pull and push:

n Configuration pull and push is done using FTP for devices that support binary(.zip) configurations.

n Configuration pull and push is done using Terminal for devices that support text (.cfg)configurations.

n Configuration pull and push is done using FTP for devices that support both binary(.zip) andtext(.cfg) configurations.

n Serial number and physical hardware are not available using terminal.

n Memory, file system information, and interfaces are not supported using SNMP.

Huawei SmartAXDevice Type Switch

Specific Model(s) MA5300

Operating System and Firmware Versions V3R000M03






VMware, Inc. 466



Quick Commands

View Routes

View Arp

View Interfaces

Ping

Traceroute

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes




n SNMP

n SysObjectID must contain "1.3.6.1.4.1.2011."

n Model ID should be mapped to the SysObjectID and that should match to the package ID.

n Term

n show version command must have "Huawei Versatile Routing Platform"

n show version command must also have "SmartAX" and model no of the device.

n show running-config | include hostname is used to get the hostname.


VMware, Inc. 467




n "show startup-config "

n Term/TFTP


n "tftp put flash:/ vrpcfg.txt //<SERVERIPADDR>/<local filename>"

n "end"



n Send configuration line by line to the device as device commands

n "end"

n "write"

n "y"

n Term/TFTP


n "tftp get //<SERVERIPADDR>/<local Filename> flash:/ vrpcfg.txt "

n "end"



n "snmp-server community <newString> ro"

n "snmp-server community <newString> rw"

n "no snmp-server community < oldString >"

n "end"

n Account



VMware, Inc. 468

n "terminal user password "

n "<username>"

n "<password>"

n "end"


n "no smart"

n "disable"


n "reboot system"

n "show version"


n "show ip route"

n "show arp"

n "show interface"

n "show ip route static"



Running Yes Yes Copy To Start ASCII Telnet, SSH,Telnet/TFTP,SSH/TFTP

Startup Yes Yes Reboot ASCII Telnet, SSH,Telnet/TFTP,SSH/TFTP



ARP Table Yes Yes


CAM Table No No


VMware, Inc. 469



Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory No No


OSPF Settings No No


Routes Yes Yes



VLANs No No


n Until a command line interface command is identified to determine the name of the startupconfiguration file, the literal name vrpcfg.txt is currently used in the driver. This will result in startupfile management errors in the event Huawei changes the name of the startup file in later softwarereleases.

n There does not appear to be a way to query the system for serial number or memory information.

n Full configuration pushes using terminal are not supported due to the content of the configuration notmerging correctly from the command line interface when issued line-by-line. Some commands resultin sub-levels of config prompts without corresponding exit commands, and the comment character !does not serve this purpose. This leaves the device in a state where normally legal commands arenot recognized, and the resulting errors fail the push.

n The concept of privilege mode with password authorization does not exist for this device class, soprivilege password jobs are failed with change not supported.


VMware, Inc. 470

IBM Devices 46This chapter includes the following topics:

n IBM BladeCenter 1/10Gb Uplink Ethernet

n IBM BladeCenter Virtual Fabric

IBM BladeCenter 1/10Gb Uplink EthernetDevice Type Switch

Specific Model(s) 1/10Gb Uplink Ethernet Switch Module








Quick CommandsPing, Traceroute, Setup Diagnostic, View Diagnostic Setup, Setup NAT, ViewNAT Setup, View Diagnostic, ARP, Interface,routes

Features available


Auto-Discovery Yes



Configlets Yes





VMware, Inc. 471


SNMP Traps No

Syslog No

Rollback No

Quick Commands Yes




n SNMP


n Terminal

n Output of "show sys-info" contains model name and serial number.







n show active-config

n show backup-config




n snmp-server read-community <newCommunity>

n snmp-server write-community <newCommunity>


VMware, Inc. 472

Device monitoringn Show sys-info

n Show version

n Show system

n ping

n traceroute





n show interface information

n show route-map

n show arp

n write memory



running Yes Yes Copy To Start TEXT SSH, Telnet

startup No Yes No TEXT SSH, Telnet

active No Yes No TEXT SSH, Telnet

backup No Yes No TEXT SSH, Telnet



ARP Table No Yes


CAM Table No No


Identity Yes Yes


VMware, Inc. 473


Interfaces No Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No Yes



VLANs No No

IBM BladeCenter Virtual FabricDevice Type Switch

Specific Model(s) Virtual Fabric 10Gb Switch Module








Quick CommandsPing, Traceroute, Setup Diagnostic, View Diagnostic Setup, Setup NAT, ViewNAT Setup, View Diagnostic, ARP, Interface,routes

Features available


Auto-Discovery Yes



Configlets Yes






VMware, Inc. 474


SNMP Traps No

Syslog No

Rollback No

Quick Commands Yes




n SNMP


n Terminal

n Output of "show sys-info" contains model name and serial number.












n snmp-server read-community <newCommunity>

n snmp-server write-community <newCommunity>


VMware, Inc. 475

Device monitoringn Show sys-info

n Show version

n Show system

n ping

n traceroute





n show interface information

n show route-map

n show arp

n write memory



running Yes Yes Copy To Start TEXT SSH, Telnet

startup No Yes No TEXT SSH, Telnet

active No Yes No TEXT SSH, Telnet

backup No Yes No TEXT SSH, Telnet



ARP Table No Yes


CAM Table No No


Identity Yes Yes


VMware, Inc. 476


Interfaces No Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No Yes



VLANs No No


VMware, Inc. 477

Intermec Devices 47This chapter contains the following topic:

n Intermec MobileLAN

Intermec MobileLANDevice Type Wireless AP

Specific Model(s)

Tested: WA21

Untested: WA22


Communication Protocols Telnet, Telnet/TFTP





Operating System Management Protocols FTP


Features available


Auto-Discovery Yes



Configlets No





SNMP Traps Yes

VMware, Inc. 478


Syslog Yes

Rollback No

Quick Commands Yes




n SNMP

n SysDescription must contain " Intermec Technologies AP"

n Device should have valid system properties information

n Term

n Banner contains Access Point Configuration

n Main menu contains About entry

n Summary screen listing WA2n as model



n Maintenance > About This Access Point

n The resulting pages are captured as a read-only information configuration.


n Change the username through Menu "Security->User Name"

n Change the password through menu "Security->Password"

n Save the changes using menu "Save config"

n Reboot the device using menu "Reboot"

n SNMP v1/v2

n Change the SNMP community string through menu "Management->Network Management"

n Save the changes using menu "Save config"


VMware, Inc. 479

n Reboot the device using menu "Reboot"



Devinfo No Yes NA ASCII Telnet



ARP Table No Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes No


OSPF Settings No No


Routes No Yes



VLANs No No


Intermec MobileLAN

n Configlets and termlets are not supported, since the device is menu oriented with almost nocommand-line interface. The lack of configlets and termlets results in no remediation and diagnosticsupport.


VMware, Inc. 480

n This device supports only one session at a time. Any session established to the device while a pull orcredential roll is attempted, will cause the job to fail with a message referencing the inability toestablish a session.

n All configuration changes, including credential rolls, require a save and reboot of the device. Thecurrent driver does this for each credential roll, as a current limitation.

n The TFTP PUT command fails with the message File not found, making file transfer of the binaryconfiguration to the server unworkable. This prevents normal pull/push configuration management.

n ARP and Static Routes are only available using SNMP.

n Memory and Hardware Inventory are only available using Terminal.


VMware, Inc. 481

Juniper Devices 48This chapter includes the following topics:n Juniper ERX (E Series)

n Juniper Router

n Juniper EX2500 Switch

n Juniper Switch (EX Series)

n Juniper WXC

n NetScreen Firewall

Juniper ERX (E Series)Device Type Switch

Specific Model(s) E120, E320, ERX-310, ERX-700, ERX-705, ERX-1400, ERX-1440

Operating System and Firmware Versions JunOSe v8.2 and 9.1

Communication Protocols Telnet, SSH, Telnet/TFTP, SSH/TFTP, Telnet/FTP, SSH/FTP






Quick Commands

View Routes

View Arp

View Interfaces

View Processor CPU

Ping

Traceroute

VMware, Inc. 482

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes




n SNMP

n SysObjectID must contain "1.3.6.1.4.1.4874."

n Term

n show version should come back to a correct prompt

n show configuration | include hostname or show running-configuration | include hostnameshould return hostname and model name.

n Model name should be resolved to SysObjectID which contains "1.3.6.1.4.1.4874."



n "show ?"



VMware, Inc. 483

n "show running-configuration"

n Term/FTP

n "delete /outgoing/< fileName >"

n "show configuration > /outgoing/< fileName >"

n "copy running-configuration /outgoing/< fileName >"

n "show running-configuration > /outgoing/voyence.txt"

n "copy startup-configuration /outgoing/< fileName >"

n FTP the file to device server.

n Term/TFTP

n "delete <fileName>"

n "show configuration > < fileName >"

n "copy running-configuration < fileName >"

n "show running-configuration > < fileName >"

n "copy startup-configuration < fileName >"

n "Y"

n "copy "<filename> tftp://<SERVERIPADDR>/<local filename>"



n Configuration can be send line by line to the device as device commands.

n "end"

n Term/TFTP

n "copy tftp://<SERVERIPADDR>/<local config filename> <configuration FileName>"


n "boot config <configuration FileName>"

n "Y"

n "end"

n Term/FTP

n "delete /incoming/voyence.cnf"

n FTP the configuration file to the device

n "copy /incoming/voyence.cnf <configuration FileName>"


VMware, Inc. 484


n "boot config <configuration FileName>"

n "Y"

n "end"

Operating System managementn FTP

n "enable"

n "dir"


n "disable-autosync"

n "copy ftp://<ftpUser>:<ftpPassword>@<Server IP Address>/<imageName><imageNameRegEx>"

n "boot system <imageNameRegEx>"

n "synchronize"

n "srp switch"

n "y"

n "no disable-autosync"

n "end"

n "reload"

Device Monitoringn "SHOW version"

n "show configuration | include hostname"

n "show running-configuration | include hostname"

n "enable"

n "show version"


n "show hardware"

n "show process memory"

n "ping "

n "traceroute "

n "show route"


VMware, Inc. 485


n "show arp"

n "show processes"

n "show environment"

n "show snmp delta"

n "show configuration category interfaces"

n "show running-configuration category interfaces"

n "terminal length 0"

n "terminal width 512"

n "show ?"



text Yes Yes commitConfig,

reboot

ASCII Telnet, SSH,Telnet/TFTP,SSH/TFTP,Telnet/FTP,SSH/FTP

binary Yes Yes commitConfig,

reboot

Binary Telnet/TFTP,SSH/TFTP,Telnet/FTP,SSH/FTP



ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes Yes


VMware, Inc. 486



OSPF Settings No No


Routes Yes Yes



VLANs No No


n The Binary config cannot be pushed or pulled using Telnet or SSH alone.

n When entering a Text config using the command line interface, any line that matches the followingpattern is not sent, otherwise the command line interface session is dropped.

n no neighbor * rib-out disable

Juniper RouterDevice Type Router

Specific Model(s)

A20, A40, J2300, J2320, J2350, J4300, J4320, J4350, J6300, J6350, M10,M10i, M120, M160, M20, M320, M40, M40e, M5, M7i, MX240, MX480,MX960, SRX210, SRX240, SRX3400, SRX3600, SRX5600, SRX5800,SRX650, T320, T640, T1600, TX, SRX100, SRX220, SRX220H, SRX100-HM,SRX240H, QFX3500S, QFX3000-M

Operating System and Firmware Versions JUNOS v8.2 ,9.1 and 10.1, 11.2R5.4, 12.1 X 49 -D1.2, 12.2X50-D50.1







Quick Commands

View Routes

View Arp

View Interfaces

View Processor CPU

Ping

Traceroute


VMware, Inc. 487

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes




n SNMP

n SysObjectID must contain "1.3.6.1.4.1.2636" and should not contain "1.3.6.1.4.1.2636.1.1.1.[1-4].3[0-3]."

n SysObjectID must contain .1.3.6.1.4.1.2636. 1.1.1.4.82.1

n SysObjectID must contain .1.3.6.1.4.1.2636. 1.1.1.4.84.2

n Term

n show version result must contain "JUNOS"

n show version result should contain hostname and model name.

n Model name should be resolved to SysObjectID which should not contain "1.3.6.1.4.1.2636.1.1.1.[1-4].3[0-3]."



VMware, Inc. 488


n "show configuration | display ?"

n "show configuration | display set"


n "show configuration | "<format>

n Term/FTP

n "file delete voyence.cfg"

n "save voyence.cfg\n"


n "show configuration | display set | save voyence.cfg"

n "show configuration | save voyence.cfg"

n FTP the voyence.cfg to device server.




n "end"

n Term/FTP or Term/SCP



n "configure"

n "load set voyence.cfg"

n "load override voyence.cfg"

n "load replace voyence.cfg"

n "top"

n "commit check"


n "delete snmp community < old Snmp Community >"


VMware, Inc. 489

n "set snmp community <new Snmp Community> authorization read-only"

n "set snmp community <new Snmp Community> authorization read-write"

n "commit"

n Account

n "configure"

n "edit system login"

n "delete user < old User >"

n "set user <username> class superuser authentication plain-text-password"

n < password>

n "commit"

n "top"

n "exit"

Operating System managementn "file list /cf/var/tmp detail"

n "file delete /cf/var/tmp/<filename>"

n "request system software delete-backup"

n "yes"

n "show system storage"

n "show chassis routing-engine"

n show chassis hardware"

n "request routing-engine login < engine >"

n "configure" or "configure private"

n "delete chassis redundancy"

n "commit synchronize and-quit"

n "file copy ftp://< ftp User>:<ftpPassword>@<server IPaddress>/<imageName> /var/tmp/<imageNameRegEx>"

n "file copy ftp://< ftp User>@<server IP address>/<imageName> /var/tmp/<imageNameRegEx>"

n "request system software add validate /var/tmp/< imageNameRegEx>"

n "request system reboot"

Device monitoringn "show version"


VMware, Inc. 490


n "show chassis hardware"

n "show system virtual-memory | find Totals "


n "show snmp mib walk"

n "show chassis hardware detail"

n "start shell"

n "cd /"

n "ping count 10 "

n "traceroute "

n "show interfaces | no-more"

n "show route | no-more"

n "show arp | no-more"

n "show system processes | no-more"

n "show chassis hardware | no-more"

n "show snmp statistics | no-more"

n "rollback 0"

n "set cli screen-length 0"

n "set cli screen-width 0"

n "set cli terminal vt100"



running Yes Yes NA ASCII Telnet, SSH,Telnet/FTP, SSH/FTP,SSH/SCP



VMware, Inc. 491


ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys Yes No

Memory Yes Yes




Routes Yes Yes



VLANs Yes No


Juniper J Series

n In a Juniper device, the SNMP Contact and SNMP Location values must be set as alphabetical. If theSNMP Contact and SNMP Location are set with special wild card characters (such as hyphen orslash ( - , \, and others), only the information before the wild card character is displayed within theGeneral Tab of the Device Properties.

n For OS Upgrade:

n During the OS upgrade process, Juniper does not allow the deletion of some files within the TempFolder (/var/tmp). To clean the Temp Folder, manually delete any unneeded files to free upadditional system space.

Separate Push and Commit Operations

n Previously, this driver had separate push and commit operations. Currently this is reversed, and allpushes will be committed (or rolled back) automatically at the end of the push.

Rollback Command


VMware, Inc. 492

n A rollback 0 command is issued after entering global config mode, but before sending anycommands.

n Any time the driver fails to commit changes, a rollback 0 command is issued before exitingconfiguration mode.

Juniper Router

n OS Upgrade:

n OS Upgrade will not upgrade a Juniper Router that has more than one routing engine.

n Configlets may contain config mode command-line interface commands, such as:

set snmp contact EMCcontact

set snmp location EMClocation

or formatted config snippets, such as:

snmp{

contact EMCcontact

location EMClocation

}

but must not contain both formats.

Juniper QFX3500S

Juniper QFX3500S is supported on the operating system, Junos 12.1 X 49 -D1.2 which is similar tothe operating systems supported for the Juniper Routers that are certified for NCM DSr. Since thedevice certifications are based on the operating system, Juniper QFX3500S is listed under JuniperRouter.

Juniper QFX3000-M

Juniper QFX3000-M is supported on the operating system, Junos 12.2 X 50-D50.1 which is similar tothe operating systems supported for the Juniper Routers that are certified for NCM DSr. Since thedevice certifications are based on the operating system, Juniper QFX3000-M is listed under JuniperRouter.

Credential roll for QFX3000-M is not tested.

Juniper EX2500 SwitchDevice Type Switch

Specific Model(s) EX2500

Operating System and Firmware Versions EX2500 OS v3.0+





VMware, Inc. 493




Quick Commands

ViewvRoutes

View Interfaces

Resync

Ping

Traceroute

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes




n SNMP

n SysObjectID must contain "1.3.6.1.4.1.1411.102"

n SysDescription must contain "Juniper Networks EX2500"

n Term

n show sys-info is used to get Model info, Serial No for discovery and identification


VMware, Inc. 494




n "show active-config"

n "show backup-config"

n Term/TFTP

n "copy running-config tftp://<SERVERIPADDR> /<LOCALFILE>"

n "copy active-config tftp://<SERVERIPADDR>/<LOCALFILE>"

n "copy backup-config tftp://<SERVERIPADDR>/<LOCALFILE>"



n Term/TFTP

n "copy tftp://<SERVERIPADDR>/<local config filename> running-config"

n "copy tftp://<SERVERIPADDR>/<local config filename> active-config"

n "copy tftp://<SERVERIPADDR>/<local config filename> backup-config"

n "y"


n "enable"

n "snmp-server read-community < new SnmpCommunity >"

n "snmp-server write-community < new SnmpCommunity >"

n Account

n "enable"


n "show access user"

n "access user user-password"


VMware, Inc. 495

n "access user operator-password"

n "access user adminstrator-password"

n <password>

n "no access user <oldUserNum> enable"

n "end"

n "access user <enableUser> name < userName >"

n "access user <enableUser > level admin"

n "access user <enableUser > password"

n <password>

n "access user <enableUser> enable"

n "no access user <disableUser> enable"

n "end"

Device monitoringn "show ip route"

n "show sys-info"

n "show snmp"

n "ping "

n "traceroute "

n "show interface info"

n "show interface link"

n "show interface portchan info"

n "show interface portchan link"

n "show ip route"



VMware, Inc. 496


Running Yes Yes Copy To Start ASCII SSH, Telnet,SSH/TFTP,Telnet/TFTP

Active Yes Yes Reboot ASCII SSH, Telnet,SSH/TFTP,Telnet/TFTP

Backup Yes Yes NA ASCII SSH, Telnet,SSH/TFTP,Telnet/TFTP



ARP Table No No


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes No


OSPF Settings No No


Routes Yes No



VLANs No No


n When sending a config line by line using Telnet or SSH, sending an ip-mgmt interface addresscommand causes the immediate dropping of the terminal session.

n The driver intentionally filters out any configuration line that starts with ip-mgmt interface addresswhen sending in line by line mode.


VMware, Inc. 497

n The Juniper EX2500 local AAA system only supports 10 user accounts. If the new user does notalready exist when rolling users and passwords, the driver will attempt to reuse the old user account ifit exists. If the old user account does not exist, the driver will look for an available user account. Ifthere are no available user accounts, no changes will be made and the job will fail.

n The Juniper EX2500 has console logging enabled by default. It is advisable to permanently turn offconsole logging on any Juniper EX2500 devices that will be managed by this application, since thedevice sends console messages during the login procedure. During testing, the driver managed tologin despite these console messages, but the messages slow down the login procedure dramatically.For best performance, turn off console logging permanently using the following commands:


n no logging console

n end

n save running-config startup-config

Juniper Switch (EX Series)Device Type Switch

Specific Model(s)

EX3200, EX3200-24T, EX3200-24T-DC, EX3200-24P, EX3200-48T,EX3200-48T-DC, EX3200-48P, EX4200, EX4200-24T, EX4200-24T-DC,EX4200-24P, EX4200-24F, EX4200-24F-DC, EX4200-48T, EX4200-48T-DC,EX4200-48P, EX8208, EX8216

Operating System and Firmware Versions JunOS v9.2 and 9.3







Quick Commands

View Routes

View Arp

View Interfaces

View Processor CPU

Ping

Traceroute

Features available


Auto-Discovery Yes



VMware, Inc. 498



Configlets Yes





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes




n SNMP

n SysObjectID must contain ""1.3.6.1.4.1.2636.1.1.1.[1-4].3[0-3]."

n Term

n show version local result must contain "JUNOS" and "Model: [Ee][Xx]"

n show version local result should contain hostname and model name.

n Model name should be resolved to SysObjectID.

n show configuration should respond with a stdEnablePrompt.




n "show configuration | display set"


n Term/FTP



VMware, Inc. 499

n "save voyence.cfg\n"


n "show configuration | display set | save voyence.cfg"

n "show configuration | save voyence.cfg"

n FTP the voyence.cfg to device server.




n "end"

n Term/FTP or Term/SCP



n "configure"

n "load set voyence.cfg"

n "load override voyence.cfg"

n "load replace voyence.cfg"

n "top"

n "commit check"


n "delete snmp community < old Snmp Community >"

n "set snmp community <new Snmp Community> authorization read-only"

n "set snmp community <new Snmp Community> authorization read-write"

n "commit"

n Account

n "configure"

n "edit system login"

n "delete user < old User >"

n "set user <username> class superuser authentication plain-text-password"

n < password>


VMware, Inc. 500

n "commit"

n "top"

n "exit"

Operating System Managementn "file list /cf/var/tmp detail"

n "file delete /cf/var/tmp/<filename>"

n "request system software delete-backup"

n "yes"


n "show chassis routing-engine"

n show chassis hardware"

n "request routing-engine login < engine >"

n "configure" or "configure private"

n "delete chassis redundancy"

n "commit synchronize and-quit"

n "file copy ftp://< ftp User>:<ftpPassword>@<server IPaddress>/<imageName> /var/tmp/<imageNameRegEx>"

n "file copy ftp://< ftp User>@<server IP address>/<imageName> /var/tmp/<imageNameRegEx>"

n "request system software add validate /var/tmp/< imageNameRegEx>"

n "request system reboot"



n "show chassis hardware"

n "show system virtual-memory | find Totals "


n "show snmp mib walk"

n "show chassis hardware detail"

n "start shell"

n "cd /"

n "ping count 10 "


VMware, Inc. 501

n "traceroute "

n "show interfaces | no-more"

n "show route | no-more"

n "show arp | no-more"

n "show system processes | no-more"

n "show chassis hardware | no-more"

n "show snmp statistics | no-more"

n "rollback 0"

n "set cli screen-length 0"

n "set cli screen-width 0"

n "set cli terminal vt100"



running Yes Yes NA ASCII Telnet, SSH,Telnet/FTP,SSH/FTP, SSH/SCP



ARP Table Yes Yes


CAM Table No No


Identity No Yes

Interfaces Yes Yes

Keys Yes No

Memory Yes Yes





VMware, Inc. 502


Routes Yes Yes



VLANs Yes No


Juniper EX2500 Switch - Not Supported with Juniper Switch (EX Series) Driver

n Juniper EX2500 models are not supported by the Juniper Switch (EX Series) device driver. Use theJuniper EX2500 Switch driver for EX2500 model support.

Separate Push and Commit Operations

n Previously, this driver had separate push and commit operations. Currently this is reversed, and allpushes will be committed (or rolled back) automatically at the end of the push.

Rollback Command

n A rollback 0 command is issued after entering global config mode, but before sending anycommands.

n Any time the driver fails to commit changes, a rollback 0 command is issued before exitingconfiguration mode.

Juniper EX

n When managing a stack of EX4200s, the system properties and hardware are shown for the masterswitch only.

n Configlets may contain config mode command-line interface commands, such as:

set snmp contact EMCcontact

set snmp location EMClocation

or formatted config snippets, such as:

snmp

{

contact EMCcontact

location EMClocation

}

but must not contain both formats.


VMware, Inc. 503

Juniper WXCDevice Type Router

Specific Model(s)WXC-500, WXC-590, WXC-100, WXC 250, WXC1800, WXC-2600, WXC3400

Operating System and Firmware Versions WXOS 5.7.5.0

Communication Protocols SNMP, TELNET, TELNET/FTP, SSH, SSH/FTP

Configuration Files Content Ascii



Credential Management SNMPv1/v2, Account


Quick Commands Ping, traceroute

Features availableFeature Support

Auto-Discovery Yes



Configlets Yes





SNMP Traps No

Syslog Yes

Rollback No

Quick Commands Yes




VMware, Inc. 504


n SNMP

n sysObjectID value contains

n 1.3.6.1.4.1.8239.1.2.5

n 1.3.6.1.4.1.8239.1.2.3

n 1.3.6.1.4.1.8239.1.2.6

n 1.3.6.1.4.1.8239.1.2.12

n 1.3.6.1.4.1.8239.1.2.1

n 1.3.6.1.4.1.8239.1.2.9

n 1.3.6.1.4.1.8239.1.2.7

n Serial number is retrieved from .1.3.6.1.4.1.8239.2.1.2.1.3.0

n sysName will be used for discovery

n Terminal:

n Model number is extracted using "show version"

n Chassis Serial number is extracted using "show license"

n Host name is extracted using "show system"



n show config

n Terminal/TFTP:

n save-config <filename>

n copy /ata0/cfg/<filename>.cfg tftp://<Server IP address /tftpboot/<filename>

n Terminal/FTP:

n save-config <filename>

n copy /ata0/cfg/<filename>.cfg ftp://<Server IPaddress>:<username>:<password> /tftpboot/<filename>


VMware, Inc. 505


n Configuration is sent line by line to the device

n commit

n Terminal/TFTP:

n copy ftp://<Server IP address> /tftpboot/<filename> /ata0/cfg/<filename>.cfg

n load-config <filename>

n save-config

n Terminal/FTP:

n copy ftp://<Server IPaddress>:<username>:<password> /tftpboot/<filename> /ata0/cfg/<filename>.cfg

n load-config <filename>

n save-config

Credential Managementn SNMP

n config snmp set read-community <newSnmpCommunity>

n config snmp set write-community <newSnmpCommunity>

n commit

n Account

n passwd

n <old password>

n <new password>

Operating System Managementn upgrade tftp://<serverIp>/<imageName>

n upgrade ftp://<serverIp>:<Username>:<upgradePass>/tftpboot/<imageName>

n reboot

Device Monitoringn ls

n show version

n show system


VMware, Inc. 506

n show license

n ping <ip address>

n traceroute <ip address>



Running Yes Yes Copy To Saved Ascii TELNET,SSH,TELNET/FTP,SSH/FTP,TELNET/TFTP,SSH/TFTP

Startup Yes Yes Copy To Saved Ascii TELNET/FTP,SSH/FTP,TELNET/TFTP,SSH/TFTP



ARP Table Yes Yes



CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes No

OSPF Settings No No


Routes Yes Yes



VLANs No No


VMware, Inc. 507

Known issuesThe following existing device issues have been discovered within other releases. In most cases, aresolution is included to address the issue:

n Account name change is not supported by device. Only password can be changed.

n Only WXC 500 device has been used for development/testing and other models were not tested forthis release as they were not available.

n An FTP login "emcftp" with password as "ftp@emc" must exist on the NCM device server for Pushand Pull operation to work using FTP.

n Pull and Push operation using TFTP could not be tested due to environmental restrictions.

n Pull operation can be performed for startup and running configuration, but push operation can beperformed only for running configuration.

n During an operating system upgrade on Juniper WXC devices, if you choose only the Copy option tocopy the operating system image and not the Install option, manually rebooting the device willautomatically install the new operating system.

n After upgrading the operating system on a Juniper WXC device, SNMP credentials must be set tomatch the SNMP credentials in NCM before performing a second upgrade.

NetScreen FirewallDevice Type Firewall

Specific Model(s)

NS5, NS10, NS100, NS1000, NS500, NS50, NS25,NS204, NS208, NS5XT, NS5XP, NS5000, NS5GT,HARDWARESECURITYCLIENT, ISG1000, ISG2000,NS5GT-ADSL-ANNEXA, NS5GT-ADSL-ANNEXB,NS5GT-WLAN, NS5GT-ADSL-ANNEXA-WLAN, NS5GT-ADSL-ANNEXB-WLAN, SSG5, SSG5-ISDN, SSG5-V92,SSG5-WLAN, SSG5-ISDN-WLAN, SSG5-V92-WLAN,SSG20, SSG20-WLAN, SSG-520, SSG-550, SSG-140,SSG-250, SSG-320M, SSG-350




Configuration Change Notification (Events) Traps




Quick CommandsPing, Traceroute, View Interfaces, View Routes, ViewARP, Resync, View SA, View Processor CPU


VMware, Inc. 508

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog No

Rollback Yes

Quick Commands Yes




n SNMP

n sysObjectID contains "1.3.6.1.4.1.3224"

n Terminal

n Get the model Number from the output of the get system command by matching the regularexpression "^Product Name: (.*)"

n Get the Hostname from the output of the get hostname command by matching the regularexpression "^Hostname: (.*)"



n get config

n get config saved


VMware, Inc. 509

n Terminal/TFTP

n exec save config to tftp <serverIPAddress> <filename>

n save config from flash to tftp <serverIPAddress> <filename>




n Terminal/TFTP

n save config from tftp <serverIPAddress> <filename> merge

n save config from tftp <serverIPAddress> <filename> to flash


n set admin name <userName>

n set admin password <password>

n SNMP

n set snmp community <newSnmpCommunity> Read-Only | Read-Write

n unset snmp community <oldSnmpCommunity>

Device Monitoringn get hostname

n get system

n get interface

n ping

n trace-route

n get route

n get sa active

n get os kernel

n get memory

n get snmp settings

n exit


VMware, Inc. 510

Multi-config filesThe following files are used when storing and revisioning multiple configuration files for multi-configsupport.


Running Yes Yes Copy to Start ASCII SSH, Telnet, SSH/TFTP,Telnet/TFTP

Startup Yes Yes NA ASCII SSH, Telnet, SSH/TFTP,Telnet/TFTP



ARP Table No Yes


CAM Table No No


Identity Yes Yes

Interfaces No Yes

Keys No No

Memory Yes Yes


OSPF Settings No No


Routes No Yes



VLANs No No

Known issuesThe following are existing device issues that have been discovered with other releases. A resolution isincluded to address the issue, if available.

n In NetScreen ScreenOS version 5.0, the SNMP sysName variable may not display the actual systemhostname on the device. In version 5.0, the SNMP sysNAME variable is not updated when the valueis changed on the device. This issue does not apply to NetScreen ScreenOS version 4.0.


VMware, Inc. 511

n For the SNMP to display the correct system hostname, the configuration line must be set correctlywith the following syntax: set snmp name "<hostname>".

n The "View Processor CPU" quick command is not supported in the NetScreen ScreenOS versions, upto and including, version 4.X.


VMware, Inc. 512

Lantronix Devices 49This chapter includes the following topics:

n Lantronix ETS

n Lantronix EDS

Lantronix ETSDevice Type Switch

Specific Model(s) ETS8P, ETS16P


Communication Protocols TELNET, SNMP






Quick Commands Ping, View ports, Netstat


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

VMware, Inc. 513

Syslog Yes

Rollback No

Quick Commands Yes




n SNMP

n sysObjectId contains 1.3.6.1.4.1.244.1(6|7)

n sysDescr should contain Lantronix ETS

n Terminal

n show server characteristics command support available



n show server characteristic

n show server bootparam

n list server characteristics

n list server bootparam

n show port all characteristics

n show port all status

Device monitoringn show server characteristics

n show server status

n save server

n netstat

Multi-config filesThe following file is used when storing and revisioning multiple configuration files for multi-config support.


VMware, Inc. 514

Multi-Config File Push Pull Post Operation Content Type Protocols

running Yes Yes copyToStart, reboot,copyToStartAndReboot

ASCII TELNET

startup No Yes Not Available ASCII TELNET

Ports No Yes Not Available ASCII TELNET

Device dataThe data in the table represents device data per device class.

Attributed Data Terminal SNMP

ARP Table No Yes


CAM Table No No


Identity Yes Yes

Interfaces No Yes

Keys No No

Memory Yes No


OSPF Settings No No


Routes No Yes



VLANs No No

Lantronix EDSDevice Type Switch

Specific Model(s) EDS2100

Operating System and Firmware Versions 5.4.0.0R7







VMware, Inc. 515




Auto-Discovery Yes



Configlets No





SNMP Traps Yes

Syslog Yes

Rollback No

Quick Commands Yes




n SNMP


n Terminal

n Show command output should have "Product Type”



n xcr dump

n xsr dump


VMware, Inc. 516

Device monitoringn show

n device

n show hardware information

n filesystem

n show memory



Xcr record No Yes Not Available ASCII TELNET,SSH

Xsr record No Yes Not Available ASCII TELNET,SSH



ARP Table No Yes


CAM Table No No


Identity Yes Yes

Interfaces No Yes

Keys No No

Memory Yes Yes


OSPF Settings No No


Routes No Yes



VLANs No No


VMware, Inc. 517

Laurel Devices 50This chapter contains the following topic:

n Laurel ST Router

Laurel ST RouterDevice Type Router

Specific Model(s) ST200

Operating System and Firmware Versions 3.1.1R2.1

Communication Protocols SSH/SCP






Quick CommandsTest Credentials, Setup Diagnostic, View Diagnostic Setup,Setup NAT, View NAT_Setup, View Diagnostic


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

VMware, Inc. 518

Syslog No

Rollback Yes

Quick Commands Yes




n SNMP

n sysObjectID value contains 1.3.6.1.4.1.5395.1.1.1.1.1

n sysDescription value contains IOS Laurel

n Terminal

n Not Available


Configuration capturen Terminal : SSH/SCP:

n show configuration | save <txt file>

n file delete <txt file>

Configuration deployn Terminal: SSH/SCP

n Push-configType-deviceId.cmd using SCP to the device

n Configure

n Run test configuration push-configType-deviceId.cmd

n If no errors occur, load merge push-configType-deviceId.cmd

n If successful, commit confirm

n File delete push-configType-deviceId.cmd

n Commit


VMware, Inc. 519

Commit confign Terminal: SSH/SCP



n SNMP credentials are rolled by cloning the new community string from the setting for the oldstring in the configuration. The result is pushed as a command file to the device.

n Account

n set system login user <newUser> authentication plain-text-password

n delete system login user <oldUser>


n show version

n run test configuration

n file delete

n load merge

n show configuration snmp

n ping

n traceroute

n show interface

n show route forwarding-table

n show arp



running Yes Yes Copy To Start ASCII SSH/SCP



VMware, Inc. 520


ARP Table No No


CAM Table No No


Identity No Yes

Interfaces No No

Keys No No

Memory No No


OSPF Settings No No


Routes No No



VLANs No No

Known issuesn The config mode displays an error if any other session is in configuration mode. This avoids unrelated

commits when multiple users are provisioning.

n Push to running with copy to start is the only push type, as commits must always be completed.Otherwise, the changes are rolled back after ten minutes.

n Configlets cannot contain flower braces ({}) in their content since it distinguishes them from fullconfigs in the driver.

n Configlets are sent line-by-line to the command line interface.

n Full configurations are copied, checked, and then applied using load merge filename.

n Account credential rolls change only the password, not the user.

n There is no volatile or non-volatile storage information available using SNMP for this device class.


VMware, Inc. 521

Linux Devices 51This chapter contains the following topics:

n Linux

LinuxDevice Type Linux Server

Operating System and Firmware Versions Redhat Linux - 5.6, 6.5, 6.8, 6.9

Communication Protocols SSH, TELNET, TELNET/FTP, SSH/TFTP



Discovery/Identify Methods SSH



Quick Commands Finger, ps, Ping, Traceroute, View Arp, View Interfaces, View Routes

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

Syslog No

Rollback No

VMware, Inc. 522


Quick Commands Yes




n SSH/TELNET

n Command "uname -a" to know its Linux server.

n Command "hostname" should provide hostname of the device

n Command "dmidecode" should provide device Model & serial number

Configuration capturen ASCII config

n ASCII config is pulled using SSH/SCP, TELNET/FTP, SSH/FTP, SSH/TFTP

Configuration deployn ASCII config

n Text configuration data can be pushed using SSH/SCP, TELNET/FTP, SSH/FTP, SSH/TFTP




"passwd username"




VMware, Inc. 523


/etc/passwd Yes Yes NA ASCII SSH/SCP,TELNET/FTP,SSH/FTP,SSH/TFTP

/etc/group Yes Yes NA ASCII SSH/SCP,TELNET/FTP,SSH/FTP,SSH/TFTP

/etc/hosts Yes Yes NA ASCII SSH/SCP,TELNET/FTP,SSH/FTP,SSH/TFTP

/etc/sysconfig Yes Yes NA ASCII SSH/SCP,TELNET/FTP,SSH/FTP,SSH/TFTP




Identity Yes No

Interfaces Yes No

Memory Yes No




VMware, Inc. 524

Lucent Devices 52This chapter contains the following topic:

n Lucent Access Point

Lucent Access PointDevice Type Router

Specific Model(s) 300, 450, 600, 1000


Communication Protocols Telnet. SSH




Credential Management SNMP V1 / V2 ; Account


Quick Commands Not Available

Features availableFeatures Available Support

Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

VMware, Inc. 525

Rollback Yes

Quick Commands No



Discovery/identity methodsThe following information must be available for this driver class to manage an applicable device.

n SNMP

n sysDescr value contains Lucent Access Point



n Running-config : gen-script all


n Configuration is pushed line by line to the device with checks for invalid input messages


n show services snmp community <index> config services snmp community <index>community/user-name <newSnmpROCommunity> ! access readonly config services snmpcommunity <index> community/user-name <newSnmpRWCommunity> ! access readwrite

n Account

n services snmp community <index> config services snmp community <index> community/user-name <userNametoUse> ! <password> access readwrite

Device monitoringn gen-script all

n show services snmp community <index>


VMware, Inc. 526

Multiple configuration filesFollowing are the files used when storing and revisioning multiple configuration files for multi-configsupport:


Running Yes Yes NA ASCII TELNT, SSH

Device Data


ARP Table No Yes


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory No Yes


OSPF Settings No No


Routes No Yes



VLANs No No


VMware, Inc. 527

Marconi Devices 53This chapter contains the following topic:

n Marconi ASX

Marconi ASXDevice Type Switch

Specific Model(s) ASX-1000


Communication Protocols Telnet/TFTP




Credential Management SNMP V1 / V2 ; Account


Quick Commands

Standard quick commands, view routes, view Interfaces, View ATMARP

View LEC ARP

Features available


Auto-Discovery Yes



Configlets Yes





VMware, Inc. 528


SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes



Discovery/identity methodsThe following information must be available for this driver class to manage an applicable device:

n SNMP

n sysOID value contains 1.3.6.1.4.1.326.2.2

n sysServices has value 0x04


Configuration capturen Term/TFTP

n Running

n system cdb backup -url tftp://deviceServerAddr/remoteFilename

n Readable

n system batch create -url tftp://deviceServerAddr/remoteFilename


n Running

n system cdb restore -url tftp:// deviceServerAddr/remoteFilename


n security login new -username <community string> -application snmp -authmethod community -profile readonly

n security login new -username <community string> -application snmp -authmethod community -profile admin


VMware, Inc. 529

n Account

n security login new -username <new username> -application telnet -authmethod password -profileadmin

n security login delete -username <old username> -application telnet -authmethod password -profile admin

Device monitoringn security login new

n security login delete

n system ping

n system cdb [ backup | restore ]

n interfaces ip show

n interfaces ip route show

n services atmarp show

n interfaces lec arp show

Multiple config filesFollowing are the files used when storing and revisioning multiple configuration files for multi-configsupport.


Running Yes Yes NA Binary TELNT/TFTP

Readable No Yes NA ASCII TELNT/TFTP

Device date


ARP Table No No


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory No No


OSPF Settings No No


VMware, Inc. 530



Routes No No



VLANs No No

Known issuesn No volatile or non-volatile storage information is available using SNMP for this device class.

n Serial number falls uses the primary MAC address if the envMgmtBoardSerialNumber OID in theFore-SWITCH-MIB is unavailable.

n The binary configuration is represented as base64-encoded data in the Config Editor, allowingsupport for configlet pushes for this destination.

n The read/write community string is given the Admin profile during creation.


VMware, Inc. 531

McAfee Devices 54This chapter contains the following topic:

n McAfee IntruShield

McAfee IntruShieldDevice Type Other

Specific Model(s) I4000


Communication Protocols SSH, TELNET


Configuration Change Notification (Events) Not supported



Operating System Management Protocols Not supported


Features available


Auto-Discovery Yes



Configlets No





SNMP Traps No

Syslog No

VMware, Inc. 532


Rollback Yes

Quick Commands Yes




n SNMP

n sysOID containds 1.3.6.1.4.1.8072.3.2.10



n running-config

n show

n show ssl config

n show tacacs


n running-config : Not Supported

Credential managementn Account: Only admin/user password can be changed

n passwd cli command is sent and then the new password string is sent.

Device monitoringn show

n show ssl config

n show tacacs


VMware, Inc. 533

Multi-config filesThe following files are used when storing and revisioning multiple configuration files for multi-configsupport:


running No Yes NA ASCII Telnet, SSH



ARP Table No No


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No No



VLANs No No

Known issuesn There is no volatile or non-volatile storage information available using SNMP for this device class.

n SNMP credential management must be performed with McAfee's ISM server. An error message willdisplay if credential management is attempted through the server.

n The device class does not support the concept of configuration push. The output for the followingcommands contains all the data and cannot be edited:

n show

n show ssl config

n show tacacs


VMware, Inc. 534

MDS Devices 55This chapter contains the following topics:

n MDS iNet

MDS iNetDevice Type Router

Specific Model(s) MDS iNET 900


Communication Protocols SNMP, SSh/Telnet




Credential Management Account credential, SNMP v1/v2


Quick Commands NA

Features available


Auto-Discovery Yes



Configlets No





SNMP Traps No

Syslog No

VMware, Inc. 535


Rollback No

Quick Commands No




n SNMP

n sysObjectID should contain .1.3.6.1.4.1.4130




n Using the "Configuration Scripts Menu" of the device set the following:

n Set TFTP Host Address to <Server IP Address>

n Set Config Filename to <local file name>

n Set Send File to Y

n Check "Send File" for status of completion



n Set "TFTP Host Address" to <Server IP Address>

n Set "Config Filename" to <config file name>

n Set "Retrieve File" to Y

n Check "Retrieve File" for status of completion


VMware, Inc. 536


n At "SNMP Agent Config Menu" set the following

n Set "A) Read Community" for <new Community String>

n Set "B) Write Community" for <new Community String>

n Account(Only Password change)

n At "User Passwords Menu" set the following,

n Set "A) Change Admin Password" for <new Password>Device Monitoring



running Yes Yes No Text SSH/Telnet- TFTP



ARP Table No Yes


CAM Table No No


Identity Yes Yes

Interfaces No Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No Yes



VLANs No No


VMware, Inc. 537


n Discovery through CLI is not supported and discovery is only supported through SNMP. This devicehas a device-locking issue, in which device gets locked if session is not released through menuoptions. Else, sessions tend to exist and thus, lock the device after a few attempted connections.

n TFTP pull/push has not been tested.

n After push or credential roll, pull of system properties and identity is successful only if snmp creds arementioned.(As grabbing and releasing sessions cleanly in this device is an issue).


VMware, Inc. 538

Metamako Devices 56This chapter contains the following topics:

n MetamakoSwitch

MetamakoSwitchDevice Type Switch

Specific Model(s) A32-A3, C48-A4








Quick Commands Ping,Traceroute,Interfaces,Arp

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

Syslog Yes

VMware, Inc. 539


Rollback No

Quick Commands Yes




n SNMP







n Configlets must use the text config for the destination.


n traceroute

n show interfaces status




startup Yes Yes Not Applicable ASCII TELNET,SSH


VMware, Inc. 540



ARP Table No Yes


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory No Yes


OSPF Settings No No


Routes Yes Yes



VLANs No No


VMware, Inc. 541

Milan Devices 57This chapter contains the following topic:

n Milan

MilanDevice Type Switch

Specific Model(s) SM801P, SME801P

Operating System and Firmware Versions SM801P-V117, SM801P-V118, SME801P-V200

Communication Protocols TELNET, SSH, SNMP/TFTP, HTTP/TFTP





Operating System Management Protocols Not Supported

Quick Commands Standard quick commands, View VLAN

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

VMware, Inc. 542


Rollback Yes

Quick Commands Yes




n SNMP

n sysObjectID contains "1.3.6.1.4.1.835.25.1.1.1.1"

n OS version from 1.3.6.1.4.1.835.6.10.2.1.2.1.3.


Configuration capturen HTTP/TFTP

n running-config : Running configuration of the device is pulled via TFTP by accessing the devicethrough HTTP. Below is the operation done to pull config

n post:hostname(<DEVADDR>):readlimit(1000):username(<username>):password(<password>):/tftpup

n SNMP/TFTP

n running-config: F ollowing OIDs are set for pulling the running config.

n 1.3.6.1.4.1.835.6.10.2.4.1.0 <- TFTP IP

n 1.3.6.1.4.1.835.6.10.2.4.2.0 <- TFTP FileName.

n 1.3.6.1.4.1.835.6.10.2.4.3.0 <- TFTP action

n 1.3.6.1.4.1.835.6.10.2.4.4.0 <- TFTP Status

Configuration deployn HTTP:TFTP

n running-config : Running configuration pushed via TFTP by accessing the device through HTTP.Below is the operation done to push config.

n post:hostname(<DEVADDR>):readlimit(1000):username(<username>):password(<password>):/tftpdown


VMware, Inc. 543

n SNMP/TFTP

n Running-config: Following OIDs are set for pushing the running config.

n 1.3.6.1.4.1.835.6.10.2.4.1.0 <- TFTP IP

n 1.3.6.1.4.1.835.6.10.2.4.2.0 <- TFTP FileName.

n 1.3.6.1.4.1.835.6.10.2.4.3.0 <- TFTP action

n 1.3.6.1.4.1.835.6.10.2.4.4.0 <- TFTP Status

Credential managementDevice is menu based.

n SNMP

n After logging into the device, device is entered into following menus for changing the communitystrings:

a ProtocolConfig

b SnmpConfig

c CommStrings

d Add

e Edit

f Save

n Account

n After logging into the device, device is entered into following menus for changing the communitystrings:

a SwitchConfig

b AdminConfig

c UserName

d Edit

e Save

f Password

g Save



VMware, Inc. 544


Running Yes Yes Copy To Start ASCII SNMP/TFTP,

HTTP/TFTP



ARP Table No Yes


CAM Table No No


Identity Yes Yes

Interfaces No Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No Yes



VLANs No No


VMware, Inc. 545

Motorola BSR 58This chapter contains the following topic:

n Motorola BSR Router

Motorola BSR RouterDevice Type Router

Specific Model(s) BSR64000, BSR1000 and OSR2000

Operating System and Firmware Versions 3.1.1.14P03C.KRCU 4.2.0.08P07.H20.KRCU

Communication Protocols TELNET, SSH, TELNET/TFTP, SSH.TFTP, SSH/SCP


Configuration Change Notification (Events) Not Supported


Credential Management SNMP V1/V2, Account, Privilege


Quick CommandsStandard quick commands, View Routes, View ARP, View Interfaces, ViewProcessor CPU.

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

VMware, Inc. 546


Syslog No

Rollback Yes

Quick Commands Yes




n SNMP

n sysObjectID MIB scalar is retrieved and checked for the RiverDeltaNetworks enterprise value(4981):

n The value is used as an enumeration to identify the product, documented in$VOYENCE_HOME/package/pkgxml/ MotoBSRChassisTypes.xml.

n If the resulting product name is longer than one character, and sysServices MIB scalar has bit3 set, discovery is successful.



n running-config : show running-config

n startup-config : show startup-config.

n Terminal/TFTP

n running-config: copy running-config tftp://<serverIPAddress >/<Filename>

n startup-config: copy startup-config tftp://<serverIPAddress >/<Filename>


n Running/startup configuration is sent line-by-line to the device.


n snmp-server community <communityString> ro


VMware, Inc. 547

n snmp-server community <communityString> rw

n no snmp-server community <communityString>

n Account

n password telnet

n username <newUserName> password <password>

n username <username> privilege rw

n Privilege

n enable password <newPassword>

n enable secret <newPassword>

Operating System managementn dir

n copy <fromPath> <toPath>

n delete

n update chassis <imageFile>

n show update status

n show chassis status

n dir all

n boot system



n password telnet

n snmp-server community

n ping

n traceroute

n show ip-route

n show arp


n show process-cpu

n enable [password | secret]


VMware, Inc. 548



Running Yes Yes Copy To Start ASCII TELNET, SSH,

TELNET/TFTP,

SSH/TFTP

Startup Yes Yes Reboot ASCII TELNET, SSH,

TELNET/TFTP,

SSH/TFTP



ARP Table No No


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory No Yes


OSPF Settings No No


Routes No No



VLANs No No


VMware, Inc. 549

MRV Devices 59This chapter contains the following topic:

n MRV LX Terminal Server

MRV LX Terminal ServerDevice Type Switch

Specific Model(s) All LX Series Models

Operating System and Firmware Versions All LX Series Models





Credential Management SNMP V1/V2, Account, Privlige


Quick Commands Standard quick commands.

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

VMware, Inc. 550


Rollback Yes

Quick Commands Yes




SNMPn sysObjectID contains 1.3.6.1.4.1.33

n sysDescr contains “LX Remote Presence Manager”

n Model from OID 1.3.6.1.4.1.33.100.1.1.12.0

n OSversion from OID 1.3.6.1.4.1.33.100.1.1.4.0

n Serial number from OID 1.3.6.1.2.1.2.2.1.6.1



n save configuration network <filename> <serverIPAdress>


n load configuration from network <filename> <serverIPAdress>


n config snmp <ro | rw > client 15 255.255.255.255

n config snmp <ro | rw > client 15 mask 0.0.0.0

n config snmp <ro | rw > client 15 community <newSnmpCommunity>

n config snmp <ro | rw > client 15 version v2c

n save config flash


VMware, Inc. 551

n Account

n config subscriber <newUser> password <password>

n config no subscriber <oldUser>

n save config flash

n Privilege

n config password <newPrivPassword>

n save config flash

Operating System managementn update ppciboot <imaegRepo> image name <imageName>

n save config flash

Device monitoringn show system stat

n show system char

n config subscriber

n config snmp

n config subscriber

n save configuration

n load configuration

n ping



Text-config Yes Yes Copy to Start ASCII TELNET/TFTP,

SSH/TFTP



ARP Table No No



VMware, Inc. 552


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No No

System Properties Yes Yes


VLANs No No


VMware, Inc. 553

NetCache Devices 60This chapter contains the following topic:

n NetCache

Device Type ContentCache

Specific Model(s) C1200








Quick CommandsSystem config, SysConfig, Setup diagnostic, ViewDiagnostic Setup, Setup NAT, View NAT setup

NetCache

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

VMware, Inc. 554


Syslog Yes

Rollback Yes

Quick Commands Yes



Discover/Identity methodsThe following information must be available for this driver class to manage an applicable device:

n SNMP

n sysDescr contains NetApp

n Model C1200 exists in NetCacheModels.xml



n running-config : pullrun_cmd


n running-config : "priv set diag" and "batch on" commands are sent to enter into priv mode andstart a new batch. Then configuration is sent line by line to the device.


n show config.snmp.communities Account :

n config.snmp.communities = <newSnmpROCommunity>

n Account: Only admin/user password can be changed

n passwd <new password>

Device monitoringn show config.snmp.communities

n sysconfig


VMware, Inc. 555

n priv set diag

n batch revert

n batch on



Running Yes Yes Copy To Start ASCII Telnet, SSH



ARP Table No Yes


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory No Yes


OSPF Settings No No


Routes No Yes



VLANs No No


VMware, Inc. 556

Netopia Devices 61This chapter contains the following topic:

n Netopia R7000 Series

Netopia R7000 SeriesDevice Type Router

Specific Model(s) R7000 series (R7200, R7220, R7231)


Communication Protocols TELNET, Telnet/TFTP






Quick Commands View ARP

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

VMware, Inc. 557


Rollback Yes

Quick Commands Yes




n SNMP

n sysDescr contains Netopia

n sysDescr contains R7200 or R7220 or R7231



n running-config : send tftp config <tftp server IP> <filename>


n Running : receive tftp config < tftp server IP> <filename>


n snmp community ro <community string>

n snmp community rw <community string>

n Account

n user <user name> <password>

n no user <old user name>

Device monitoringn send tftp config

n receive tftp config

n show arp


VMware, Inc. 558



Running Yes Yes NA ASCII Telnet/TFTP



ARP Table No Yes


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory No Yes


OSPF Settings No No


Routes No Yes



VLANs No No

Known issuesThe following are existing device issues that have been discovered with other releases.

n Push of binary-config reboots the device automatically without any warning.


VMware, Inc. 559

Nokia Devices 62This chapter contains the following topic:

n Nokia IP

Nokia IPDevice Type Firewall

Specific Model(s)IP260, IP265, IP350, IP355, IP380, IP385, IP390, IP45, IP560,IP1220, IP1260, IP2255


Communication Protocols SSH/SCP, SSH/FTP, Telnet/FTP, SSH, Telnet






Quick Commands View Interfaces, View ARP, View Routes

Features available


Auto-Discovery Yes



Configlets No





SNMP Traps Yes

VMware, Inc. 560


Syslog Yes

Rollback Yes

Quick Commands Yes




n SNMP

n sysDescr value contains "Nokia" or "nokia" or "IPSO" or "NOKIA"


Configuration capturen The files listed in the Multi-Config Files section for this device are pulled via supported file transfer

mechanisms using UNIX file commands.

Configuration deployn UNIX file commands are used to push the files back.

n The files listed in the Multi-Config Files section for this device are retrieved via supported file transfermechanisms.


n dbpasswd <oldUser> <newPassword> <oldPassword>

n SNMP

n clish -c 'add snmp community <newSNMPCommunity> read-only'

n clish -c 'add snmp community <newSNMPCommunity> read-write'

Device monitoringn clish -c 'add snmp community …'

n clish -c 'copy….'

n reboot

n ifconfig


VMware, Inc. 561

n ping

n traceroute

n arp

n netstate



$base_dir/conf/netso.C Yes Yes NA ASCII SSH/SCP,SSH/FTP,Telnet/FTP

$base_dir/conf/objects.C Yes Yes NA ASCII SSH/SCP,SSH/FTP,Telnet/FTP

$base_dir/conf/InternalCA.C Yes Yes NA ASCII SSH/SCP,SSH/FTP,Telnet/FTP

$base_dir/conf/snmp.C Yes Yes NA ASCII SSH/SCP,SSH/FTP,Telnet/FTP

$base_dir/conf/SDS_objects.C Yes Yes NA ASCII SSH/SCP,SSH/FTP,Telnet/FTP

$base_dir/conf/classes.C Yes Yes NA ASCII SSH/SCP,SSH/FTP,Telnet/FTP

$base_dir/conf/lea_server_unification_sche me.C

Yes Yes NA ASCII SSH/SCP,SSH/FTP,Telnet/FTP

$base_dir/conf/log_unification_scheme.C


$base_dir/conf/newobjects.C Yes Yes NA ASCII SSH/SCP,SSH/FTP,Telnet/FTP

$base_dir/conf/refs.C Yes Yes NA ASCII SSH/SCP,SSH/FTP,Telnet/FTP

$base_dir/conf/tables.C Yes Yes NA ASCII SSH/SCP,SSH/FTP,Telnet/FTP


VMware, Inc. 562


$base_dir/conf/userdef.C Yes Yes NA ASCII SSH/SCP,SSH/FTP,Telnet/FTP

$base_dir/conf/cpha.conf Yes Yes NA ASCII SSH/SCP,SSH/FTP,Telnet/FTP

$base_dir/conf/cphaprob.conf Yes Yes NA ASCII SSH/SCP,SSH/FTP,Telnet/FTP

$base_dir/conf/cpmap_config.conf Yes Yes NA ASCII SSH/SCP,SSH/FTP,Telnet/FTP

$base_dir/conf/cpmap_opsec.conf Yes Yes NA ASCII SSH/SCP,SSH/FTP,Telnet/FTP

$base_dir/conf/cpmap_rulebase.conf


$base_dir/conf/cp.lf Yes Yes NA ASCII SSH/SCP,SSH/FTP,Telnet/FTP

$base_dir/conf/product.conf Yes Yes NA ASCII SSH/SCP,SSH/FTP,Telnet/FTP

$base_dir/conf/fwauthd.conf Yes Yes NA ASCII SSH/SCP,SSH/FTP,Telnet/FTP

$base_dir/conf/fwopsec.conf Yes Yes NA ASCII SSH/SCP,SSH/FTP,Telnet/FTP

$base_dir/conf/slapd.conf Yes Yes NA ASCII SSH/SCP,SSH/FTP,Telnet/FTP

$base_dir/conf/smtp.conf Yes Yes NA ASCII SSH/SCP,SSH/FTP,Telnet/FTP

$base_dir/conf/omi.conf Yes Yes NA ASCII SSH/SCP,SSH/FTP,Telnet/FTP

$base_dir/conf/thresholds.conf Yes Yes NA ASCII SSH/SCP,SSH/FTP,Telnet/FTP

$base_dir/conf/fwmusers Yes Yes NA ASCII SSH/SCP,SSH/FTP,Telnet/FTP


VMware, Inc. 563


$base_dir/conf/gui-clients Yes Yes NA ASCII SSH/SCP,SSH/FTP,Telnet/FTP

$base_dir/conf/external.if Yes Yes NA ASCII SSH/SCP,SSH/FTP,Telnet/FTP

$base_dir/conf/cp.license Yes Yes NA ASCII SSH/SCP,SSH/FTP,Telnet/FTP

$base_dir/conf/masters Yes Yes NA ASCII SSH/SCP,SSH/FTP,Telnet/FTP

$base_dir/conf/*.W Yes Yes NA ASCII SSH/SCP,SSH/FTP,Telnet/FTP

/config/active Yes Yes NA ASCII SSH/SCP,SSH/FTP,Telnet/FTP

$base_dir/state/* Yes Yes NA Binary SSH/SCP,SSH/FTP,Telnet/FTP

$base_dir/conf/serverkeys.* Yes Yes NA Binary SSH/SCP,SSH/FTP,Telnet/FTP

$base_dir/database/* Yes Yes NA Binary SSH/SCP,SSH/FTP,Telnet/FTP

$base_dir/conf/fwauth.NDB Yes Yes NA Binary SSH/SCP,SSH/FTP,Telnet/FTP

$base_dir/conf/fwauth.keys Yes Yes NA Binary SSH/SCP,SSH/FTP,Telnet/FTP

$base_dir/conf/rulebases.fws Yes Yes NA Binary SSH/SCP,SSH/FTP,Telnet/FTP

$base_dir/conf/cp.license Yes Yes NA ASCII SSH/SCP,SSH/FTP,Telnet/FTP

$base_dir/conf/sic_policy.conf Yes Yes NA ASCII SSH/SCP,SSH/FTP,Telnet/FTP


VMware, Inc. 564


$base_dir/database/cprid/cprid_keys/*

Yes Yes NA Binary SSH/SCP,SSH/FTP,Telnet/FTP

$base_dir/database/cprid/cprid_util_keys/*

Yes Yes NA Binary SSH/SCP,SSH/FTP,Telnet/FTP



ARP Table No Yes


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory No Yes


OSPF Settings No No


Routes No Yes



VLANs No No


VMware, Inc. 565

Nortel Devices 63This chapter includes the following topics:n Nortel Alteon

n Nortel Router

n Nortel Baystack

n Nortel BoSS Switch

n Nortel Contivity

n Nortel Multi-Service Switch

n Nortel Passport 8600

n Nortel 4500 Switch

n Nortel Passport 1648

Nortel AlteonDevice Type Load Balancer

Specific Model(s)184, 180e, 2208, 2216, 2216 E, 2424, 2424 SSL, 3408, AD3, AD4, ASF-5009-X305, iSD SSL, Application Switch 5224XL, Alteon 6420

Operating System and Firmware Versions Application Switch 5224XL, 29.5.2.1

Communication Protocols SNMP/TFTP, Telnet/TFTP, SSH/TFTP, SSH, Telnet






Quick Commands View Interfaces, View ARP, View Routes

VMware, Inc. 566

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes




n SNMP

n sysObjectID contains .1.3.6.1.4.1.1872. 1.13.3.5.1

n sysDescr value contains "Alteon" or "Nortel Application Switch"


Configuration capturen Telnet and SSH

n /cfg/dump

n Terminal/TFTP

n /cfg/ptcfg tftpIpAddress remoteFilename -tftp -mgmt

n SNMP/TFTP

n The driver tests for ALTEEON-TIGON- or ALTEON-CHEETAH-MIB support and usescorresponding MIB values to pull the configuration.


VMware, Inc. 567

Configuration deployn Telnet and SSH

n Commands are issued to the command line interface and the results are scanned for errors.

n Terminal/TFTP

n /cfg/gtcfg tftpIpAddress remoteFilename -tftp -mgmt

n SNMP/TFTP

n The driver tests for ALTEEON-TIGON- or ALTEON-CHEETAH-MIB support and usescorresponding MIB values to push the configuration.


n /cfg/sys/radius/cur

n /cfg/sys/tacacs/cur

n /cfg/sys/access/user/admpw

n SNMP

n /cfg/sys/ssnmp/ r comm <newCommunityString>

n /cfg/sys/ssnmp/ w comm <newCommunityString>


n traceroute

n exit

n save

n apply



Running Yes Yes Copy to Start ASCII SSH, Telnet, SSH/TFTP,Telnet/TFTP, SNMP/TFTP



VMware, Inc. 568


ARP Table No Yes


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory No Yes


OSPF Settings No No


Routes No No



VLANs No No

Known issuesThe following device issues have been discovered with other releases. A resolution is included to addressthe issue, if available.

n No restrictions are enforced on password length.

n For terminal pushes, the script configuration line is skipped.

n Configuration management using SSH/TFTP or Telnet/TFTP exhibits problems for push, dependingon OS version.

n For example, the Main menu is displayed and Error: Successful is reported, but the configurationchanges are ignored.

n Depending on the running software version, the following commands generate errors and must beremoved or commented out for a push to be successful using terminal.

n tnet ena

n /cfg/sys/sshd/ena

n /cfg/sys/sshd/on


VMware, Inc. 569

Nortel RouterDevice Type Router

Specific Model(s) AN, ARN, BCN, BLN, ASN, Passport 2430, Router 5580, Router 5430

Operating System and FirmwareVersions

15.4.0.1, 15.4.0.2, 15.4.2.6

Communication Protocols Telnet/FTP, Telnet


Configuration Change Notification(Events)

Syslog, SNMP Traps



Operating System ManagementProtocols

TFTP

Quick Commands View Memory, View ARP, View Routes

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes




VMware, Inc. 570


n SNMP

n sysServices value is 0x04

n sysObjectID value contains "1.3.6.1.4.1.18.3"



n Terminal

n show config -all

n Terminal/FTP

n Determine directory and FTP using the directory number


n Pushes the config one line by line.

n Terminal/FTP

n Determine directory and FTP put using the directory number


n password

n <oldPassword>

n <newPassword>

n <newPassword>

n SNMP

n snmp

n community <newCommunity>

n access read-only | access read-write

n manager address 0.0.0.0


VMware, Inc. 571

Operating System managementn compact <volume>

n tftp get <serverLocation> <srcFilename> <volume>: <destFilename>

n rm <partition> <filename>

n delete <partition> <filename>

n tftp put <serverIPAddress> <imageSlot> <name > <backupFileName>

n ftp get <serverIPAddress> <name > <imageSlot> <backupFileName>


n reset

n more off

n exit

n show ip arp

n show console version

n history

n show process memory total

n show hardware memory

n show ip route

n config

n config -force

n bcc

n back

n show config -all

Multi-config filesThe following files are used when storing and revisioning multiple configuration files for multi-configsupport.


Binary config Yes Yes Save Configuration Binary Telnet/FTP

text config Yes Yes Save Configuration,Reboot

ASCII Telnet

config report No Yes NA ASCII Telnet/FTP


VMware, Inc. 572



ARP Table No Yes


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory Yes Yes


OSPF Settings No No


Routes No Yes



VLANs No No


n Issue: Pushing Command using Configlet is displaying as completed with a warning message whenthe Push type is Push to Run.

n Resolution: Config pushes to the ARN must be executed using the Telnet mechanism. Theconfiguration, which is modified and pushed, must be a configuration pulled using Telnet.

An ARN config pulled using Telnet, can be edited, and will not have binary data displayed at thebottom of the configuration.

A configuration pulled using Telnet/TFTP, will have the text string<VoyenceControl_Config_file><FilePath>Text Config</FilePath><humanReadableeditable="false"<>![CDATA[ displayed at the top of the configuration, and will have binary datapresent at the end of the configuration.

This configuration can not be edited, as indicated by the humanReadable editable="false" string.

The Telnet/TFTP config should be pushed back to the ARN device for rollback only.


VMware, Inc. 573

Nortel BaystackDevice Type Switch

Specific Model(s) 450, 410 350, 350-12T, 380-24F

Operating System and Firmware Versions 4.0.2.2, 4.4.0.6, 4.5.1.1

Communication Protocols SNMP/TFTP, Telnet/TFTP, SSH/TFTP, SSH, Telnet






Quick Commands Standard Commands

Features available


Auto-Discovery Yes



Configlets No





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes




n SNMP

n sysDescr value contains "BayStack" or "Ethernet Switch +4[67]0 - (24|48)T"


VMware, Inc. 574

n sysObjectID is 1.3.6.1.4.1.45



n Tftp the config file with Menu based options

n SNMP/TFTP

n Walk on the OIDs and create the config file


n Tftp back the config file with Menu based options.


n Select the proper option from the Menu and send the new password

n SNMP

n Select the proper option from the Menu and send the newCommunity String

Operating System managementn Get into Software Download Menu, send the filename and TftpServer information.



Binary config Yes Yes NA Binary SSH/TFTP,Telnet/TFTP

Text config No Yes NA ASCII SSH/TFTP,Telnet/TFTP

SNMP config No Yes NA ASCII SNMP/TFTP



VMware, Inc. 575


ARP Table No Yes


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory No Yes


OSPF Settings No No


Routes No Yes



VLANs No Yes

Known issuesThe following existing device issues that have been discovered with other releases. A resolution isincluded to address the issue, if available.

n Cut-thru needs to be recorded so it can be sent as a termlet

n Push of binary-config reboots the device automatically without any warning

Nortel BoSS SwitchDevice Type Switch

Specific Model(s)BPS 2000, Baystack 460 & 470, 2550T, 2550T-PWR,3510-24T, 4524GT,4526FX, 4526GTX, 4526GTX-PWR, 5650TD

Operating System and Firmware Versions 3.1.4.11, 3.6.03, 3.5.0.58

Communication Protocols Telnet/TFTP, Telnet, SNMP/TFTP, SSH/TFTP








VMware, Inc. 576

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes




n SNMP

n sysDescr value contains "Ethernet Switch 470" or "Ethernet Switch 460" or "BayStack 470" or"BayStack 460" or "Business Policy Switch 2000" or "Ethernet Routing Switch 55" or "EthernetRouting Switch 2550T-PWR" or "Ethernet Routing Switch 2550T-PWR (Stack Enabled)" or"Ethernet Routing Switch 4524GT" or "Ethernet Routing Switch 4526FX" or "Ethernet RoutingSwitch 4526GTX" or "Ethernet Routing Switch 4526GTX-PWR" or "Ethernet Routing Switch5650TD" or "Ethernet Switch 3510-24T"

n sysObjectID value contains "1.3.6.1.4.1.45.3"



n copy [config|running-config] tftp address <ServerIPAddress> filename <filename>


VMware, Inc. 577

n SNMP/TFTP

n Walk on the OIDs and return the config.


n Replace "ip bootp server disabled" to "ip bootp server disable" and "\r" to "" in the config file.

n Push the config back one line by line and check for the errors.

n Terminal/TFTP

n copy tftp config address <ServerIPAddress> filename <filename>


n cli password ?

n cli password [stack|switch] telnet local

n cli password [stack|switch] serial local

n cli password [stack|switch] rw admin <newPassword>

n SNMP

n snmp-server community <newSnmpROCommunity> ro

n snmp-server community <newSnmpRWCommunity> rw

Operating System managementn download address <TftpServerAddress> [image|diag] <filename>

Device monitoringn conf t

n en

n exit



VMware, Inc. 578


Binary config Yes Yes NA Binary Telnet/TFTP,SSH/TFTP

Text config Yes Yes NA ASCII Telnet/TFTP,SSH/TFTP

SNMP config No Yes NA ASCII SNMP/TFTP


Atributed data Terminal SNMP

ARP Table No Yes


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory No Yes


OSPF Settings No No


Routes No Yes



VLANs No Yes

Nortel ContivityDevice Type Vpn Concentrator

Specific Model(s)600 1000, 1010, 1050, 1100, 15XX 1600, 1700, 1740, 1750, 2000, 2500, 2600,2700, 4500, 4600

Operating System and Firmware Versions 4_70.119

Communication Protocols Telnet/FTP, SSH/FTP, SSH, Telnet






VMware, Inc. 579

Device Type Vpn Concentrator



Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes




n SNMP

n Get the EnterpriseOid from sysObjectID

n The above EnterpriseOid should be same as the EnterpriseOid mentioned in the models file i.e.1.3.6.1.4.1.2505

n Use the sysObjectID to get various models from models file



n term paging off


VMware, Inc. 580

n show running

n Terminal/FTP

n Setup the FTP context

n Delete the existing config file with the command del /system/runconf/voyence.cli

n Generate running config file with the command show running file-url voyence

n FTP the config file to NCM




n Terminal/FTP

n Delete the existing config files from the device

n FTP the config file from NCM to the device.


n adminname <UserName> password <Password>

n SNMP

n show snmp get-host

n snmp-server get-host <IPAddress> <newSnmpROCommunity> enabled

Operating System managementn dir

n dir <partition-name> SYSTEM

n show status statistics system file-system

n retrieve software <FTP server IP> version <OS Version> path <image file name> uid <username>password <password> recurse

n boot system <new-OS-version> recurse

Device monitoringn exit

n end

n term paging off


VMware, Inc. 581

n show running

n dir …

n delete <filename>

n retrieve software <serverLocation> version <SwVersion> path <srcFileName> uid <userName>password <password> recurse

n del

n show snmp get-host

n snmp-server get-host <IPAddress> "<newSnmpROCommunity>" enabled

n boot system <newOsVersion> recurse



Running-configuration Yes Yes NA ASCII SSH/FTP,Telnet/FTP, SSH,Telnet



ARP Table No Yes


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory No Yes


OSPF Settings No No


Routes No Yes



VMware, Inc. 582



VLANs No No

Nortel Multi-Service SwitchDevice Type Switch

Specific Model(s) 7480, 15000, 20000, Nortel Carrier Passport


Communication Protocols Telnet/FTP, Telnet

Configuration Files Content ASCII, ASCII XML






Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes




VMware, Inc. 583


n SNMP

n sysDescr contains "Carrier Passport" string


n sysServices is Layer2 and Layer3

n Terminal

n system name is extracted from display -notabular mod nodeName. It must have nodeName =systemName content.

n chassis serial number is derived from display -notabular vr/* ip If/. It must havehardwareAddress = value. the "-" characters are removed and the remaining content is used as-it-is.


Configuration capturen Terminal/FTP

n FTP the config file to NCM

n copy pr

n save -ascii pr




n Terminal/FTP

n save -ascii -f(voyence_install) pr

n FTP the config file from NCM to the device.


n add Ac Userid/<newUserName>


VMware, Inc. 584

n set Ac Userid/<newUserName> password <newPassword>…

n del ac userid/<oldUser in uppercase>

n SNMP

n set Vr/… <newCommunityString>,viewIndex 1,accessMode readOnly,…

Device monitoringn display FileSystem

n d -notab shelf

n d -notabular vr/* ip if/"<DEVADDR>

n d -notab sw avl

n d -notabular shelf card/* memoryCapacity, memoryUsage

n display -o prov

n exit

n act pr

n save pr

n commit pr

n confirm pr

n quit

n d -o pr



Running Yes Yes NA ASCII Telnet/FTP

Startup Yes Yes NA ASCII Telnet/FTP



ARP Table No No


CAM Table No No


VMware, Inc. 585



Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes Yes


OSPF Settings No No


Routes No Yes



VLANs No No

Known issuesThe following device issues that been discovered with other releases. A resolution is included to addressthe issue, if available.

n Chassis serial number using terminal may change based on hot-sparing behavior for controlprocessor switchover, since it is based on the hardwareAddress information of the active CP

n Model information using terminal is based on the following criteria:

n display -noTabular Shelf shelfType is fabricBasedShelf for Passport 15000 and 20000, andbusBasedShelf for Passport 7400

n display -noTabular Shelf slotConfiguration is 40G for Passport 15000

n O/S version using terminal depends on the base_ naming convention of the software distribution inthe output of the display -noTabular Sw avl command

n The current version of the device driver pulls more than one configuration file and stores it internallywith XML sections as a single "running configuration". The user must exercise special care if anychanges are made in the Configuration Editor to avoid corrupting the contents prior to a push.

Nortel Passport 8600Device Type Router

Specific Model(s) 1050, 1200, 1250, 8106, 8110, 8310, 8603, 8606, 8610

Operating System and Firmware Versions 3.5.1.0, 3.5.3.0, 3.7.2.0

Communication Protocols Telnet/TFTP, Telnet, SSH/TFTP, SSH




VMware, Inc. 586

Device Type Router




Quick Commands View Sys Info

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes




n SNMP

n sysServices is Layer3




n config cli more false


VMware, Inc. 587

n show config

n Terminal/TFTP

n copy /flash/[config.cfg | boot.cfg] <ServerIPAddress>:<filename>




n Terminal/TFTP

n copy <ServerIPAddress>:<filename> /flash/[config.cfg | boot.cfg]


n config cli password rwa <newUserName>

n <oldPassword>

n <newPassword>

n <newPassword>

n SNMP

n config sys set snmp community [ro | rw] <newCommunityString>

Operating System managementn copy <TftpserverLocation>:<srcFileName> /<partition>/<destFileName>

Device monitoringn save config

n dir

n config cli more false|true

n show tech

n save bootconfig

n save config

n ping

n traceroute

n show sys info


VMware, Inc. 588

n boot



Running Yes Yes Copy to Start ASCII Telnet, SSH

Startup Yes Yes Reboot ASCII Telnet/TFTP,SSH/TFTP

boot.cfg Yes Yes Reboot ASCII Telnet/TFTP,SSH/TFTP



ARP Table No Yes


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory Yes Yes


OSPF Settings No No


Routes No Yes



VLANs No No



VMware, Inc. 589

Nortel Passport 8600 - Syntax/Constraint Violations

n Passport configurations may contain syntax or other constraint violations that prevent theconfiguration from being pushed to the device. These syntax constraint violations are part of theconfiguration retrieved from the device. Be aware you may have to correct the constraint violationswhen configuration pushes occur.

The Schedule Manager shows the last ten lines of the configuration push, including the devicesresponse to aid in this effort.

Nortel Passport 8600 - Unable to Config Push to Nortel Passport 8600

n Some of the commands in the Nortel Passport 8600 device require privileged permission to modify.Access using the RWA (Read Write All) account is required. If one attempts to push the runningconfig with a lower privileged account (e.g. Manager) the push will fail.

For example the mac-flap-time-limit is a privileged command and attempting to push it causes theNortel Passport 8600 device to give a Permission Denied error.

Nortel Passport 8100 - Config Push fails

n Issue: When executing a configuration push to the Nortel Passport 8000 Series device, theconfiguration push may not be successful due to lines present in the device configuration that are notvalid configuration commands for the device.

n Resolution: Determine the correct device configuration command for that particular configurationentry, and then push this command using the Configlet Editor.

Nortel 4500 SwitchDevice Type Switch

Specific Model(s) 4550T, 2526T-PWR, 4526T-PWR, 4550T-PWR, 4548GT-PWR


5.1.2.004

Communication Protocols Telnet/TFTP, Telnet, SSH/TFTP, SSH



Not available




Not Available

Quick Commands View Routes, View ARP, View Interfaces


VMware, Inc. 590

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

Syslog No

Rollback Yes

Quick Commands Yes




n SNMP

n sysDescr contains "Ethernet Routing Switch"

n sysObjectID must map to a model in NortelSwitch4500.models

n Terminal

n the session banner must contain the model name as well as "Ethernet Routing Switch"

n Model name must map to a sysObjectID fragment in NortelSwitchModels.xml





VMware, Inc. 591

n Terminal/TFTP

n copy [running-config | config] tftp address <ServerIPAddress> filename <filename>




n Terminal/TFTP

n [(configure network) | (copy tftp config)] address <ServerIPAddress> filename <filename>


n cli password read-write <password>

n username <username> <password> rw

n SNMP

n snmp-server community "<newCommunityString>" [ro | rw]

Device monitoringn terminal length 0

n terminal width 132

n show system verbose

n show tech

n show ip

n show interfaces verbose


n copy running-config tftp address remoteIpAddr filename remoteName

n copy config tftp address remoteIpAddr filename remoteName

n configure network address remoteIpAddr filename remoteName

n copy tftp config address remoteIpAddr filename remoteName

n write memory

n show ip default-gateway

n show arp-table


VMware, Inc. 592

Multi-config filesFollowing are the files used when storing and revisioning multiple configuration files for multi-configsupport..


running-config Yes Yes Copy to Start ASCII Telnet, SSH, Telnet/TFTP,SSH/TFTP

startup-config Yes Yes NA Binary Telnet/TFTP, SSH/TFTP



ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes Yes


OSPF Settings No No


Routes Yes Yes



VLANs No No

Known issuesThe following device issues that have been discovered with other releases. A resolution is included toaddress the issue, if available.

n The read-only account (typically RO) cannot be used for device management since it cannot bepromoted to read-write status. Most commands will fail with Invalid input as a result.

n The device driver supports one set of account and SNMP credentials per device. This is a limitation ofthe device architecture.


VMware, Inc. 593

n The delay in pulling and pushing binary configurations appears to be directly related to the number ofswitches in the stack.

n Pushing a binary configuration is service-affecting: other connected sessions will hang during the filetransfer, and the device will reboot without any confirmation.

n Push of startup-config reboots the device automatically.

Nortel Passport 1648Device Type Router

Specific Model(s) 1648T


Not available

Communication Protocols Telnet/TFTP, SSH/TFTP, Telnet



Syslog, SNMP Traps


Credential Management Not available


Not Available


Features available


Auto-Discovery Yes



Configlets No





SNMP Traps Yes

Syslog Yes

Rollback No

Quick Commands Yes


VMware, Inc. 594





n SNMP

n The OSI layer 3 bit (0x04) is set in sysServices

n sysObjectID contains "1.3.6.1.4.1.2272.43" or "1.3.6.1.4.1.2272.44"



n upload configuration <ServerIPAddress> <filename>


n download configuration <ServerIPAddress> <filename>

Device monitoringn logout

n upload configuration <ServerIPAddress> <filename>

n download configuration <ServerIPAddress> <filename>



Running Yes Yes NA ASCII Telnet/TFTP



VMware, Inc. 595


ARP Table No Yes


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory No Yes


OSPF Settings No No


Routes No Yes



VLANs No No


n This device driver does not presently support command-line configuration command pushes. As aresult, configlets and remediation are not supported.


VMware, Inc. 596

OneAccess Devices 64This chapter contains the following topic:

n OneAccess OneOS

OneAccess OneOSDevice Type Router

Specific Model(s) OneOS

Operating System and Firmware Versions OS11







Quick CommandsPing, Traceroute, Setup Diagnostic, View Diagnostic Setup, Setup NAT, ViewNAT Setup, View Diagnostic, ARP,interfaces,routes

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

VMware, Inc. 597


Syslog No

Rollback No

Quick Commands Yes




n SNMP


n Terminal:

n Output of "show version" contains model name and software version.

n Output of "show device" contains hostname.

n Output of "show system status" contains serial number.







n user add <user> <password> administrator

n user delete <user>

n user password <password>

n SNMP

n snmp set-read-community <newCommunity>


VMware, Inc. 598

n snmp set-write-community <newCommunity>

n no snmp set-read-community

n no snmp set-write-community

Device monitoringn Show system status

n Show version

n Show device

n Show interfaces

n Show routes

n Show arp

n ping

n traceroute




running Yes Yes No TEXT SSH, Telnet



ARP Table No Yes


CAM Table No No


Identity Yes Yes

Interfaces No Yes

Keys No No

Memory No No



VMware, Inc. 599


OSPF Settings No No


Routes No Yes



VLANs No No


VMware, Inc. 600

OpenGear Devices 65This chapter contains the following topics:

n OpenGear ACM50XX

OpenGear ACM50XXDevice Type Linux Server

Specific Model(s) ACM50xx

Operating System and Firmware Versions 3.4.0-uc0

Communication Protocols SSH/SCP






Quick Commands

View Interfaces,

Ping,

Traceroute

Features available


Auto-Discovery Yes



Configlets No





VMware, Inc. 601


SNMP Traps No

Syslog No

Rollback Yes

Quick Commands Yes




n SSH/TELNET

n Command check_version should provide output string “OpenGear”.

n Command “hostname” should provide hostname of the device

n Command “hostid” should provide device serial number



n ASCII config is pulled using SSH/SCP

n Binary config

n Binary config is pulled using SSH/SCP, following are commands:

n config -e $Basedir(default:/etc/config)/backup.opg

n scp <remote file > <local>

n rm /etc/config/backup.opg


n Text configuration data can be pushed using SSH/SCP

n Binary config

n Binary config is pushed using SSH/SCP to the managing Device Server, following commands areexecuted:

n ssh <localfile> <remote file>


VMware, Inc. 602

n config -t /etc/config/backup.opg(To verify opg status)

n config -i /etc/config/backup.opg




n config -g config.users (to get user id)

n config -s config.users.<userID>.username = <new user>

n config -P config.users.<userID>.password




/etc/config/config.xml Yes Yes NA ASCII SSH/SCP

backup Yes Yes NA Binary SSH/SCP




Identity Yes No

Interfaces Yes No

Memory Yes No


Routes Yes No



VMware, Inc. 603


n Pulling “backup” configuratio will save a file in $Basedir(default:/etc/config)/backup.opg.

n backup.opg will be deleted from device after pulling data

n Push of backup will apply changes only if backup.opg is not corrupt

n Push of backup will apply the changes if file is not corrupt

n Push and pull is not tested with telnet/tftp

n If backup.opg file already exists it will be moved to backup-<timestamp>.opg file

n If backup.opg file already exists and permission is not there to remove or rename, pull job will fail.


VMware, Inc. 604

Overture Devices 66This chapter includes the following topics:

n Overture NC

n Overture NG

n Overture NP

n Overture 1400

Overture NCDevice Type Switch

Specific Model(s) ISG 45+, 34, 45, 140, 180, 140V, 180V

Operating System and Firmware Versions 8.1.0.22.6, 9.1.0.9

Communication Protocols SNMP/FTP




Credential Management SNMP v1/v2



Features available


Auto-Discovery Yes



Configlets Yes



VMware, Inc. 605




SNMP Traps Yes

Syslog No

Rollback Yes

Quick Commands Yes




n SNMP

n The sysObjectID OID must be accessible from the device agent.

n The serial number must be available at 1.3.6.1.4.1.7950.2.10.1.2



n Text config is captured using SNMP get requests

n Binary config

n Binary config is pulled using anonymous FTP access to the managing Device Server

n FTP access is initialized using SNMP requests


n Text configuration data can be pushed using Config or Configlet editor using SNMP set messages

n User must have knowledge of what SNMP oids are writeable and can be pushed. User mustadhere to the format of the pulled text config lines.

n Binary config

n Binary config is pushed using anonymous FTP access to the managing Device Server



VMware, Inc. 606


n new read-only and read-write communities are set using SNMP set requests

Operating System managementn OS upgrade is done using anonymous FTP access




Text config Yes Yes NA ASCII SNMP/FTP

Binary config Yes Yes NA Binary SNMP/FTP



ARP Table No Yes


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No No



VLANs No No


VMware, Inc. 607


n SNMP/TFTP is displayed in the user interface for communication, configuration capture, configurationdeploy, and software upgrades, although the device driver actually uses SNMP/FTP.

n The get ARP command can return a warning message for an unavailable MAC address due toincomplete MAC address entries.

n During text configuration pulls, errors or warnings can display for the SNMP OIDs due to the SNMPOIDs not being populated for that device.

n The device file system is unavailable, resulting in a temporary file-system being used for OSupgrades.

n Push of binary-config reboots the device automatically without any warning.

Overture NGDevice Type Switch

Specific Model(s) ISG6000

Operating System and Firmware Versions 9.1.0.80.1, 10.1.0.46

Communication Protocols SSH, Telnet, SSH/FTP, Telnet/FTP







Features available


Auto-Discovery Yes



Configlets Yes





VMware, Inc. 608



SNMP Traps Yes

Syslog Yes

Rollback Yes

Quick Commands Yes




n SNMP


n The serial number must be available at 1.3.6.1.4.1.7950.2.11.1.2.3.1.8

n Terminal

n Description or hostname must contain the model information as a string ISG6000.

n Serial number must be available through information command.




n Terminal/FTP

n show config tofile

n show config file:///tmp/config.txt

n FTP config file to NCM





VMware, Inc. 609

n Terminal/FTP

n FTP/SCP the config file from the NCM to the device

n playback <config file>


n account

n show

n password <userName> <newPassword>

n create <userName> <password> <accessLevel>

n no account <userName>

n account <username>


n securitylevel security

n commit

n SNMP

n snmp

n V2

n show community-list

n community-list create [read | write] <newCommunityString>

n community-list delete <index>

n no community-list <index>

n commit

Operating System managementn The device can download images to its flash using SSH/Telnet and FTP/SCP. The device must be

rebooted to activate the flash image.

n The device provides a FTP server but an FTP client is not supported for the device, to start a FTPsession. The FTP session must be started from the device server.

n The image should be copied into the $TFTPHOMEDIR directory on the device server. The imagepath should be relative to the $TFTPHOMEDIR directory. For example, if the image isin /tftpboot/ftp/image/isg6k_app.ovn.9.1.0.80.1 then the path for the image name in the operatingsystem inventory should be ftp/image/ isg6k_app.ovn.9.1.0.80.1.


VMware, Inc. 610

n While using the server for the operating system update, only the mechanism is used. The ftpusername and password must be the same as the device account credentials.

Device monitoringn back

n config

n main

n cli

n no more

n more

n ping

n traceroute

n information

n show config

n image install

n image switch


n show config tofile

n restore-defualts

n reboot

n info

Multi-Config filesFollowing are the files used when storing and revisioning multiple configuration files for multi-configsupport.


text config Yes Yes NA ASCII SSH, Telnet,SSH/FTP,Telnet/FTP



VMware, Inc. 611


ARP Table No Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes Yes


OSPF Settings No No


Routes No Yes



VLANs No No


n No command exists to show the model information using term. When discovering using term, SystemDescription or Hostname should contain the string ISG6000.

n The device does not disclose file system information. A dummy file-system is used for operatingsystem upgrades.

Overture NPDevice Type Router

Specific Model(s) ISG 2200, ISG 5100








VMware, Inc. 612

Device Type Router


Quick Commands View Interfaces, View Routes, View ARP

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog No

Rollback Yes

Quick Commands Yes




n SNMP


n The serial number must be available at .1.3.6.1.4.1.7950.2.1.3.2.1.3.1

n The model must be available using OID .1.3.6.1.4.1.7950.2.1.3.2.1.4.1

n The ipTable(.1.3.6.1.2.1.4.20) must be supported by the device agent

n Terminal

n The information command must list the following non-blank information:

n Model Name under Board Type.

n Serial Number under Main Board ESN.

n The System Object ID must map to the model name in OvertureModels.xml.


VMware, Inc. 613

n The following commands must return valid interface information:

n port show all status

n interface show ifall

n interface show ifName



n configuration display

n Terminal/FTP

n configuration save-remote

n FTP config file to NCM using anonymous FTP access




n Terminal/FTP

n FTP the config file from the NCM to the device

n configuration restore-remote


n account show

n account password <userName> <newPassword> <newPassword>

n account create <userName> <accessLevel> <newPassword> <newPassword>

n account delete <username>

n SNMP

n mgmt snmp v2only community-list show

n mgmt snmp v2only community-list create <newCommunityString> access-level [read | write]

n mgmt snmp v2only community-list delete entry-name <oldString>


VMware, Inc. 614

Device monitoringn mgmt cli-output set off

n mgmt config-server show

n port show all status


n information

n slot show cards

n mgmt contact show

n mgmt location show

n mgmt description show

n mgmt name show

n configuration save-remote

n configuration restore-defaults

n configuration restore-remote

n ping

n traceroute


n iproute show

n arp show



Text config Yes Yes NA ASCII SSH, Telnet

Binary config Yes Yes NA Binary SSH/FTP, Telnet/FTP



ARP Table Yes Yes



VMware, Inc. 615


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes Yes


OSPF Settings No No


Routes Yes Yes



VLANs No No


n Non-volatile storage and filesystem information are not obtainable using SNMP or the command lineinterface for the 8.1.0.22 software version. A placeholder is returned with the flash partition name, butsize and usage are not listed.

n The configuration restore-defaults command is not used as part of pushing a text configuration, sincein almost all cases the managing Device Server will not be on the same subnet as the device. Thiscommand clears all settings except for the in-band IP address, which can result in loss ofconnectivity. As a result, some configuration commands may be listed with warnings in the job results,since these settings are already present.

n Certain commands in the mgmt category are listed with a # prefix in the resulting text configuration,although these commands are legal from the command line interface when the prefix is omitted.These commands are skipped during a configuration push because the device treats this characteras an invalid command.

n An FTP transfer service must be configured for this device.

n The binary configuration push is service-affecting, since the configuration restore-remote commandreboots the device after receiving the configuration from the Device Server.

n The managing account for the device must have an access-level of security or SNMP/Account Rollscannot be performed.

n Account rolls transfer the access level of the original account to the new one when the nameschange.


VMware, Inc. 616

n Default accounts cannot be removed. This impacts account credential rolls in the following ways:

n Jobs that define new, equivalent accounts will show a message in the scheduler that the oldaccount cannot be removed.

n Jobs that use a default account as the new account name will simply change the password of thisaccount before removing the non-default account.

Overture 1400Device Type Router

Specific Model(s) Overture 1400


Communication Protocols SSH/Telnet, SNMP





Operating System Management Protocols Yes

Quick CommandsPing, Traceroute, Setup Diagnostic, View Diagnostic Setup, Setup NAT, View NATSetup, View Diagnostic, Interface

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

Syslog Yes

Rollback No

Quick Commands Yes




VMware, Inc. 617


n SNMP

n sysObjectID value contains .1.3.6.1.4.1.7950

n Terminal

n Output of "show system" contains host name, os version and model name.

n Output of "info" contains serial.








n account <user>


n securitylevel administrator

n commit

Operating System managementn A dummy file system is created to support OS upgrade

n Commands used for OS upgrade are

n image install ftp://<user>@<ftp server ip>/<image>

n image install scp://<user>@<scp server ip>/<image>

n Copy OS image not supported. Only full install supported.


VMware, Inc. 618

n Reboot after OS upgrade makes use of ‘image switch’ and makes the newly installed OS as theprimary OS.


n info

n show interface

n ping

n traceroute


n reboot



Running Configuration Yes Yes Yes TEXT SSH,Telnet



ARP Table No Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No Yes



VMware, Inc. 619



VLANs No No


VMware, Inc. 620

Packeteer Devices 67This chapter contains the following topic:

n Packeteer PacketShaper

Packeteer PacketShaperDevice Type Load Balancer

Specific Model(s)

Packetshaper 1000. Packetshaper 1400, Packetshaper 1500,Packetshaper 1550, Packetshaper 1700, Packetshaper 2000,Packetshaper 2500, Packetshaper 2550, Packetshaper 3500,Packetshaper 4000, Packetshaper 4500, Packetshaper 6500,Packetshaper 7500, Packetshaper 8500, Packetshaper 9500,Packetshaper 10000



Configuration Files Content ASCII XML






Features available


Auto-Discovery Yes



Configlets Yes




VMware, Inc. 621



SNMP Traps No

Syslog No

Rollback Yes

Quick Commands Yes




n SNMP

n The sysObjectID OID must contain "1.3.6.1.4.1.2334".



n The following commands are executed from a command prompt:

n mkdir 9.258/VOYENCE (if needed)

n setup capture complete 9.258/VOYENCE/ASCIICFG.CMD

n config save 9.258/VOYENCE/CONFIG.LDI

n cp 9.256/CFG/SETTINGS.CFG 9.258/VOYENCE/SETTINGS.CFG

n zip -rq 9.258/voyence/PLG.ZIP 9.256/PLG

n The above files are then transferred, using the device's built-in FTP server, from the9.258/VOYENCE/ directory to the device server.

n The files are then base64 encoded (if binary) and merged into a single XML document for storagein the configuration database.





VMware, Inc. 622

n Terminal/FTP

n The XML document is retrieved from the configuration database and separated into four discretefiles.

n The ASCIICFG.CMD file is a human-readable version of the binary configuration, and can not berestored, so it is discarded.

n The remaining three files are transferred to the 9.258/VOYENCE/ directory.

n The following commands are run:

n cp 9.258/VOYENCE/CONFIG.LDI 9.256/CFG/CONFIG.LDI

n setup load 9.258/VOYENCE/SETTINGS.CFG

n The device prompts for a reboot after loading SETTINGS.CFG, and the driver answers yes to theprompt.

n The PLG.ZIP file, which is a zipped archive of the plug-ins directory is left in the9.258/VOYENCE/ directory, and not processed in any way. The system administrator can selectto restore this file manually if needed.


n setup password touch

n <oldPassword>

n <newPassword>

n <newPassword>

n SNMP

n setup snmp [look | touch] <newCommunity>

Device monitoringn unit show

n reset

n ping



VMware, Inc. 623


running Yes Yes Copy to Start ASCII Telnet, SSH,Telnet/FTP,SSH/FTP

startup Yes Yes Reboot Binary SSH/FTP,Telnet/FTP



ARP Table No Yes


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory No Yes


OSPF Settings No No


Routes No Yes



VLANs No No


VMware, Inc. 624

Palo Alto Firewall Devices 68This chapter includes the following topics:

n Palo Alto Firewall

n Palo Alto Firewall Rev 8

Palo Alto FirewallDevice Type Firewall

Specific Model(s)

PAN 5050, 5020, 4050,M-100,PA-200,PA-500,PA-3020,PA-3060,PA-7050,PA-4020,PA-3050,PA-5060,PA-5050,PA-5020,PA-2050,PA-500, WildFire, WF-500, PA-850

Operating System and Firmware Versions 5.0.2, 6.0.2







Quick Commands ARP, Interface, Routes, Ping, Traceroute

Features available


Auto-Discovery Yes



Configlets Yes




VMware, Inc. 625



SNMP Traps No

Syslog No

Rollback No

Quick Commands Yes




n SNMP

n SsysObjectID value contains 1.3.6.1.4.1.25461.2.3

n sysDescr contains "PA-4000" or "PA-5000"

n OS version is available from .1.3.6.1.4.1.25461.2.1.2.1.1.0 OID.

n Serial number is available from .1.3.6.1.4.1.25461.2.1.2.1.3.0 OID

n Term

n Output of "show system info" contains model name and serial number.

n Output of "show system info" contains hostname of the device.

n Output of "show system info" contains the software version.



n show config candidate

n show config running


n set deviceconfig system snmp-setting access-setting version v2c snmp-community-string<newCommunity>

n delete deviceconfig system snmp-setting access-setting version v2c snmp-community-string


VMware, Inc. 626

n Account

n set mgt-config users <user> permissions role-based superuser yes

n set mgt-config users <user> password

n delete mgt-config users <user>

n set mgt-config users <user> password

Device monitoringn Show system info

n commit

n exit

n configure

n show arp all


n show routing route

n request restart system

n show config candidate


n set cli pager off

n set cli pager on



running No Yes NA TEXT SSH, Telnet


setmoderunning No Yes NA TEXT SSH, Telnet

setmodetemplate No Yes NA TEXT SSH, Telnet



VMware, Inc. 627


ARP Table No Yes


CAM Table No No


Identity Yes Yes

Interfaces No Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No Yes



VLANs No No

Known IssuesThe following details existing device issues that have been discovered with other releases. In most cases,a resolution is included to address the issue.

n Push via configlet is only supported for set commands.

n Credential roll is not tested for M-100 device

Palo Alto Firewall Rev 8

Device Type Firewall

Specific Model(s) Panorama

Operating System and Firmware Versions 8.0.6-h3







Quick Commands show system info


VMware, Inc. 628

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

Rollback No

Quick Commands Yes





n SNMP

n SsysObjectID value contains 1.3.6.1.4.1.25461.2.3.7

n sysDescr contains "Pan"

n OS version is available from .1.3.6.1.4.1.25461.2.1.2.1.1.0 OID

n Serial number is available from .1.3.6.1.4.1.25461.2.1.2.1.3.0 OID

n Terminal

n Output of "show system info" contains model name and serial number.

n Output of "show system info" contains hostname of the device.

n Output of "show system info" contains the software version.

Device operations



VMware, Inc. 629


n show config synced


Device monitoringn show config synced


Multi-config files



running No Yes NA TEXT SSH, Telnet


Device data



ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces No Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No Yes


Yes Yes


VMware, Inc. 630



VLANs No No


VMware, Inc. 631

Paradyne Devices 69This chapter contains the following topic:

n Paradyne 9100

Paradyne 9100Device Type Router



Communication Protocols Telnet







Features available


Auto-Discovery Yes

Pull configuration No


Configlets No





SNMP Traps No

Syslog No

VMware, Inc. 632


Rollback No

Quick Commands Yes




n SNMP

n sysDescription contains "Paradyne iMarc" (case-insensitive)

n serial number and system name are valid



n Access "Main menu"

n Go to "Add new account" menu

n Enter <userName>

n Enter <Password>

n Save

n Go to "Main Menu" again and delete the <oldUser> with menu options

n SNMP

n Access "Main menu"

n Go to the menu to change the community

n Enter <newSNMPCommunity>

n Save

Device DataThe following data represents device data per device class.


VMware, Inc. 633


ARP Table No No


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No No



VLANs No No

Known IssuesThe following device issues have been discovered with other releases. A resolution is included to addressthe issue, if available.

n Memory and non-volatile information are not supported by the device SNMP agent. These values aredefaulted to 0.

n The text ## no configuration support ## is listed in place of the device configuration.

n SNMP credentials cannot be changed if SNMP is disabled.


VMware, Inc. 634

Patton Devices 70This chapter contains the following topic:

n SmartNode Router

SmartNode RouterDevice Type Router

Specific Model(s)

SN1200, SN1400, SN2300, SN2400,SN2802, SN2805, SN2821, SN2835,SN4112-JS, SN4112-JO, SN4114-JS, SN4114-JO, SN4116-JS, SN4116-JO,SN4118-JS, SN4118-JO, SN4524-SN4834-JS, SN4522-SN4832-JS, SN4526-SN4836-JS, SN4528-SN4838-JS,, SN4524-SN4834-2JS2JO, SN4526-SN4836-4JS2JO, SN4528-SN4838-4JS4JO, SN4114-2JS2JO, SN4116-4JS2JO,SN4118-4JS4JO, SN4522-SN4832-JO, SN4524-SN4834-JO, SN4526-JO,SN4528-JO, SN4552, SN4562, SN4554, SN4564, SN4908-JS, SN4912-JS,SN4916-JS, SN4924-JS, SN4932-JS, SN4634, SN4638, SN46385BIS, SN4654-C, SN4658-C, SN4654-D, SN4658-D, SN4654-T, SN4658-T, SN4654-K,SN4658-K, SN4654-AA, SN4658-AA, SN4654-AB, SN4658-AB, SN4654-G,SN4658-G, SN4635, SN4639, SN4655-AA, SN4659-AA, SN4655-AB, SN4659-AB, SN4655-G, SN4659-G, SN4960-1E15V, SN4960-1E24V, SN4960-1E30V,SN4960-4E15V, SN4960-4E24V, SN4960-4E30V, SN4960-4E48V,SN4960-4E60V, SN4960-4E96V, SN4960-4E120V, SN4961-1E15V,SN4961-1E24V, SN4961-1E30V, SN4961-4E15V, SN4961-4E24V,SN4961-4E30V, SN4961-4E48V, SN4961-4E60V, SN4961-4E96V,SN4961-4E120V, SN4908-JO, SN4912-JO, SN4916-JO, SN4924-JO, SN4932-JO, SDTA

Operating System and Firmware Versions R5.2







Quick Commands View Interfaces, View Routes, View ARP, Resync

VMware, Inc. 635

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

Syslog No

Rollback Yes

Quick Commands Yes




n SNMP

n sysObjectID contains "1.3.6.1.4.1.1768.100."

n sysDescr contains "SN46.+Hardware Release [0-9]+ Version [0-9]+, Software"

n Terminal

n Get the model Number from the output of show version command by matching the regularexpression "Product[ ]*[Nn]ame +: +(.+)$"

n Get the Hostname from the output of show snmp command by matching the regular expression"hostname +: +(.*)$"

n Get the Chassis Serial Number from the output of show version command by matching theregular expression "Serial[ ]*[Nn]umber +: +(.+)$"



VMware, Inc. 636




n Terminal/TFTP






n Terminal/TFTP

n copy tftp://<serverIPAddress>/<filename> running-config

n copy tftp://<serverIPAddress>/<filename> startup-config


n administrator <username> password <password>

n no administrator <oldUser>

n SNMP

n snmp community <newSnmpCommunity> ro

n snmp community <newSnmpCommunity> rw

Operating System managementn copy tftp://<serverIPAddress>/<imageName> flash

Device monitoringn show memory stat

n show ip interface

n reload forced

n ping

n traceroute


VMware, Inc. 637

n show ip route

n show arp



Running Yes Yes Copy to Start ASCII SSH, Telnet,SSH/TFTP,Telnet/TFTP

Startup Yes Yes Reboot ASCII SSH, Telnet,SSH/TFTP,Telnet/TFTP


Atributed data Terminal SNMP

ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes No


OSPF Settings No No


Routes Yes Yes



VLANs No No


VMware, Inc. 638

Qtech Devices 71This chapter includes the following topics:

n Qtech 2800

n Qtech 2900

Qtech 2800Device Type Switch

Specific Model(s) QSW-2800-10T-AC, QSW-2800-28T-AC, QSW-8300-52F


Communication Protocols SSH, Telnet, SSH/TFTP, Telnet/TFTP, SNMP





Quick Commands

View Arp

View Interfaces

Ping

Traceroute

Features available


Auto-Discovery Yes



Configlets Yes




VMware, Inc. 639



SNMP Traps No

Syslog No

Rollback No

Quick Commands Yes




n SNMP

n SysObjectID should contain "1.3.6.1.4.1.27514.1.1.1|2"

n SysDescription should contain "QSW* Device"

n Terminal

n Output of “show version” contains model name, software version and serial number.









n "username <user> privilege 15 password 0 <password>"

n "no username <user>"


VMware, Inc. 640




n "show interface"

n "show arp"

n "reload"




Startup Configuration Yes Yes Reboot ASCII Telnet/TFTP,SSH/TFTP



ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No Yes



VLANs No No


VMware, Inc. 641


n TFTP feature has not been tested

Qtech 2900Device Type Switch

Specific Model(s) QSW-2900-24T, QSW-2910-28T-POE

Operating System and Firmware Versions V100R001B01D003SP2






Quick Commands

View Arp

View Interfaces

Ping

Traceroute

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

Syslog No

Rollback No

Quick Commands Yes




VMware, Inc. 642


n SNMP

n SysObjectID should contain "1.3.6.1.4.1.27514.1.3"

n SysDescription should contain "QTECH"

n Terminal

n Output of “show system” must contain “QTECH”.








Device monitoringn "show system"

n "show version"

n "show snmp contact"

n "show snmp location"

n "show interface"

n "show arp all"

n "show memory"

n "reboot"


VMware, Inc. 643




Startup Configuration Yes Yes Reboot ASCII SSH, Telnet,Telnet/TFTP,SSH/TFTP



ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes No


OSPF Settings No No


Routes No Yes



VLANs No No




VMware, Inc. 644

Radware Devices 72This chapter includes the following topics:

n Radware WSD Load Balancer

n Radware Switch V2

Radware WSD Load BalancerDevice Type Router

Specific Model(s) All Web Server Director models








Quick CommandsView Interfaces, View Routes, View ARP, Resync To Storage,View CPU Processes, Reboot Unit

Features available


Auto-Discovery Yes



Configlets Yes





VMware, Inc. 645


SNMP Traps No

Syslog No

Rollback Yes

Quick Commands Yes




n SNMP

n SysObjectIDs contains ".1.3.6.1.4.1.89.1.1.62.(2|3|4)"

n OS version is available from .1.3.6.1.4.1.89.2.4.0 OID



n system config immediate

n Terminal/TFTP

n manage tftp file-type set cli

n manage tftp config-file put <filename> <serverIPAddress>






n Terminal/TFTP

n manage tftp file-type set cli

n manage tftp config-file get <filename> <serverIpAddress>


VMware, Inc. 646


n manage user table add <username> -pw <password>

n manage user table del <oldUser>

n SNMP

n manage snmp community create <newSnmpCommunity> -n <newSnmpROCommunity> -sn[public | private]

n manage snmp community del <oldSnmpCommunity>


n logout

n manage terminal more-prompt set off

n ping

n trace-route

n net 12-information

n net route table

n system os cpu

n system os tasks

n net arp table

n system file-system files sync

n disable






VMware, Inc. 647


ARP Table No Yes


CAM Table No No


Identity No Yes

Interfaces Yes Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No Yes



VLANs No No

Radware Switch V2Device Type Switch

Specific Model(s) AppDirectorGlobalwithCookiePersistency


Communication Protocols SSH/Telnet, SSH/TFTP, Telnet/TFTP






Quick Commands ARP, Interface, Routes

Features available


Auto-Discovery Yes



Configlets Yes


VMware, Inc. 648






SNMP Traps No

Syslog No

Rollback No

Quick Commands Yes




n SNMP

n SysObjectIDs contains .1.3.6.1.4.1.89.1.1.62.21

n OS version is available from .1.3.6.1.4.1.89.2.4.0 OID

n Terminal

n Output of "system device-info" contains model name and serial number.

n Output of "system device-info" contains hostname of the device.

n Output of "system device-info" contains the software version.



n system config immediate

n Terminal/TFTP

n system config download <filename> <ipaddr> regular




VMware, Inc. 649




n Terminal/TFTP

n system config upload replace <filename> <ipaddr>


n manage user table add <username> -pw <password>

n manage user table del <oldUser>

n SNMP

n manage snmp community create <newSnmpCommunity> -n <newSnmpROCommunity> -sn[public | private]

n manage snmp community del <oldSnmpCommunity>


n logout

n manage terminal more-prompt set off

n pingshow route-map

n show arp

n write memory

n trace-route

n net 12-information

n net route table

n system os cpu

n system os tasks

n net arp table

n system file-system files sync

n disable


VMware, Inc. 650



Running Yes Yes NA TEXT SSH,Telnet,SSH/TFTP.Telnet/TFTP



ARP Table No Yes


CAM Table No No


Identity Yes Yes

Interfaces No Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No Yes



VLANs No No




VMware, Inc. 651

Redback Devices 73This chapter contains the following topic:

n Redback SmartEdge

Redback SmartEdgeDevice Type Router

Specific Model(s) SE800, SE800e, SE400

Operating System and Firmware Versions SEOS-6.1.3.7

Communication ProtocolsTelnet, SSH, Telnet/FTP, SSH/FTP, Telnet/TFTP, SSH/TFTP,SSH/SCP




Credential Management Account, Privilege, SNMP v1/v2



Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

VMware, Inc. 652


Syslog No

Rollback Yes

Quick Commands Yes




n SNMP


n sysDescr value contains "SmartEdge OS"

n Terminal

n Output of "show version" contains "SmartEdge OS"





n Saved Configuration

n show configuration <savedConfigFile>

n Terminal/TFTP


n save configuration <filename> -noconfirm

n copy <filename> tftp://<SERVERIPADDR>//tftpboot/<filename>


n Get the name of the saved configuration

n copy <saved_filename> tftp://<SERVERIPADDR>//tftpboot/<saved_filename>


VMware, Inc. 653



n save configuration <filename> -noconfirm

n FTP/SCP config file to NCM


n Get the name of the saved configuration

n FTP/SCP saved config file to NCM




n Terminal/TFTP

n copy tftp://<SERVERIPADDRESS>//tftpboot/<filename> /flash/<savedFileName> -noconfirm

n reboot


n FTP/SCP the config file from the NCM to the device as saved configuration

n reboot


n configure

n context local

n administrator <username> password <password>


n end

n SNMP

n snmp community <community> view InternetView read-only|read-write

n no snmp community <oldSnmpCommunity>

n end

Operating System ManagementNot available


VMware, Inc. 654


n show chassis

n show hardware

n ping

n traceroute


n show arp-cache

n show ip interface

n show memory

n reboot



Running Configuration Yes Yes Copy to Saved ASCII SSH, Telnet, SSH/FTP,Telnet/FTP, SSH/TFTP,Telnet/TFTP, SSH/SCP

Saved Configuration Yes Yes Reboot ASCII SSH/FTP, Telnet/FTP,SSH/TFTP,Telnet/TFTP, SSH/SCP



ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes No

Keys No No

Memory Yes No


VMware, Inc. 655



OSPF Settings No No


Routes Yes No



VLANs No No


n Push and pull via FTP, SCP and TFTP protocols not tested as the ports are not opened at the deviceside.


VMware, Inc. 656

Redline Devices 74This chapter contains the following topics:

n Redline RDL3000

Redline RDL3000Device Type Wireless Access Point

Specific Model(s) RDL3000


Communication Protocols SSH/Telnet, SSH/TFTP, SNMP






Quick Commands

View Interfaces,

Ping,

Arp,

Traceroute

Features available


Auto-Discovery Yes



Configlets No




VMware, Inc. 657



SNMP Traps No

Syslog No

Rollback No

Quick Commands Yes




n SNMP:

n sysObjectID value contains 1.3.6.1.4.1.10728.

n sysDescr contains “Redline”.

n OS version is available from .1.3.6.1.2.1.1.9.1.3.1 OID.

n Serial number is available from .1.3.6.1.4.1.10728.2.1.1.1.1.0 OID.

n SSH/TELNET

n Output of “show stats” contains serial number.

n Output of “get swver” contains the software version.

n Output of “get radiotype” contains the model name.



n Terminal:

n script

n Terminal/TFTP:

n script <SERVERIPADDR> <LOCALFILE>


VMware, Inc. 658


n Terminal:

n Issue command save force


n Release the session and throw an ERROR in the UI, if any Invalid/Unknown command is sentto the device.


n user add <user> admin

n user del <user>

n SNMP

n snmpcommunity add <newCommunity> r

n snmpcommunity add <newCommunity> rw

n snmpcommunity del <oldCommunity>


Device Monitoringn show config

n get radiotype

n get swver

n show stats

n save config

n reboot

n arp print



VMware, Inc. 659


running Yes Yes NA ASCII SSH, Telnet



ARP Table Yes Yes


Identity Yes Yes

Interfaces No Yes

Memory No No


Routes No Yes



n TFTP has not been tested with device


VMware, Inc. 660

Riverbed Devices 75This chapter contains the following topic:

n Riverbed Steelhead

Riverbed SteelheadDevice Type Router

Specific Model(s)

Steelhead100, CX755X, 1050X, 2050X, 5050X, 550X, CX1555X,CX5055X, CX555X, CX555M, EX1160X, EX760X, 250X, CX7055X,CX255X, 6050X, 7050X, CMC8000, 8150, C8000, 9200, C9200,9350,CX770M,CX570,CX570H,CX7070,CX7070L,CX5070,CX5070H

Operating System and Firmware Versions 7.0.3a

Communication Protocols SSH






Quick Commands Ping, Traceroute, Resync, View Interfaces, View Routes, View Arp

Features available


Auto-Discovery Yes



Configlets Yes





VMware, Inc. 661


SNMP Traps No

Syslog No

Rollback Yes

Quick Commands Yes




n SNMP

n The sysObjectID contains "1.3.6.1.4.1.17163"



n show configuration running





n username <username> password 0 <password>

n SNMP

n snmp-server community <snmpCommunity>

Device monitoringn enable

n disable

n config terminal


VMware, Inc. 662

n exit

n no cli session paging enable

n configuration write

n reload

n ping

n traceroute

n show interfaces brief

n show ip route

n show arp



Running Yes Yes Copy to Start ASCII SSH



ARP Table No No


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory No Yes


OSPF Settings No No


Routes No No



VLANs No No


VMware, Inc. 663


Riverbed Steelhead

n There is no support for sysServices (standard MIB scalar). The sysServices variable must be editedin stdlib/stdmib.inc and be made a standard snmp type instead of a snmpcached type.

n The sysObjectID represents a vendor, not the model identification.

n Configuration management using file transfer is not currently supported, since the results are a binarydatabase.

n There is no known support for configuration changes using SNMP traps or syslog facility.

n There is no SNMP support for hardware inventory, for example ENTITY-MIB. Information is takenfrom the HOST-RESOURCES-MIB, which does not support parent/child relationships.

n The device family does not currently support creation or management of individual accounts.


VMware, Inc. 664

Riverstone Devices 76This chapter contains the following topic:

n Riverstone Router

Riverstone RouterDevice Type Router

Specific Model(s)RS 500, RS 1000, RS 2000, RS 2100, RS 3000, RS 8000, RS 8600, RS32000, RS 38000, RSLA 1100, RSLA 1200, RSLA 1500









Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

VMware, Inc. 665


Syslog Yes

Rollback Yes

Quick Commands No




n SNMP

n sysDescr contains "Riverstone Networks"



n copy startup to tftp-server

n copy active to tftp-server


n copy tftp to scratchpad

n copy tftp to startup


n system set user <username> password <password> privilege 0

n system set password login <password>

n no system set user <oldUser> password <oldPass> privilege 0

n Privilege

n system set password enable <newPrivilegePass>

n SNMP

n snmp set community <newSnmpCommunity> privilege (read | read-write)


VMware, Inc. 666

n no snmp set community <oldSnmpCommunity> privilege (read | read-write)

Device monitoringn enable

n disable

n cli set terminal rows 0

n show frame-relay map

n clear counters

n show diag

n show process cpu

n show management event

n copy active startup

n configure

n exit

n reboot

n ping

n traceroute


n show ip route

n show arp



Running Yes Yes Copy to Start ASCII SSH/TFTP,Telnet/TFTP

Startup Yes Yes Reboot ASCII SSH/TFTP,Telnet/TFTP



VMware, Inc. 667


ARP Table No Yes


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory No Yes


OSPF Settings No No


Routes No Yes



VLANs No No


VMware, Inc. 668

Ruckus Devices 77Ruckus Switch

Table 77‑1. Device Type Switch

Specific Model(s) ICX7150-24-POE

Operating System and Firmware Versions 08.0.80bT213







Quick Commands show ip interface, show routes, show arp

Features available

Table 77‑2.


Auto-Discovery Yes



Configlets No





SNMP Traps No

VMware, Inc. 669

Table 77‑2. (Continued)


Syslog No

Rollback Yes

Quick Commands Yes





n SNMP

n SysObjectIDs contains "1.3.6.1.4.1.1991"

n Serial number should be obtainable from ". 1.3.6.1.4.1.1991.1.1.1.1.2.0"

n Get the sysObjectId

n sysDescr value contains "Ruckus Wireless, Inc"

n Terminal

n Output of "show version" contains model name.

n Output of "show hostname" contains hostname of the device.

n Commands show version should be able to return system properties information.

n show ip interface command should return interface information.

n sysObjectID value must be mapped by the retrieved model name from RuckusswitchModels.xml.

Device operations


Configuration capture

n Terminal





Device monitoring

n show memory


VMware, Inc. 670

n show version

n show interfaces


n show flash


n show chassis

n show module

n show vlan

n show arp

n show ip route

Multi-config files



StartupConfiguration


RunningConfiguration


Device data



ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes No


OSPF Settings No No



VMware, Inc. 671


Routes Yes No


Yes Yes


VLANs Yes No


VMware, Inc. 672

RuggedCom Devices 78This chapter contains the following topic:

n RuggedCom RS900

RuggedCom RS900Device Type Switch

Specific Model(s)RS900G, RS900G-24-D-2SFP, RS900G-24-P-2SFP, RS900GNC-24-D-2SFP, RS416

Operating System and Firmware Versions v3.8.4, v3.12.1

Communication Protocols SNMP, TELNET, TELNET/TFTP, SSH, SSH/TFTP




Credential Management SNMP v1/v2c, Account


Quick Commands Ping

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

VMware, Inc. 673


Syslog Yes

Rollback No

Quick Commands Yes




n SNMP:


n Serial number is retrieved from .1.3.6.1.4.1.15004.4.2.3.1.0

n sysName will be used for discovery

n Terminal:

n NA



n dir

n type config.csv

n Terminal/TFTP

n dir

n tftp <Server IP Address> put config.csv <configfile name>


n dir

n tftp <Server IP Address> put config.csv <configfile name>


VMware, Inc. 674


n sql SELECT * FROM vacmSecurityToGroupCfg WHERE Name = <oldSnmpCommunity>

n sql INSERT INTO vacmSecurityToGroupCfg SecurityModel,Name,Group VALUES snmpV2c,<newSnmpCommunity>, <oldGroupName>

n sql SELECT * FROM snmpV3UsersCfg WHERE Name = <oldSnmpCommunity>

n sql INSERT INTO snmpV3UsersCfg Name, IP Address, Auth Protocol, Priv Protocol, Auth Key,Confirm Auth Key, Priv Key, Confirm Priv Key VALUES <newSnmpCommunity>, <IP Address>,<Auth Protocol>, <Priv Protocol>, <Auth Key>, <Confirm Auth Key>, <Priv Key>, <Confirm PrivKey>

n sql DELETE FROM snmpV3UsersCfg WHERE Name = <oldSnmpCommunity>

n sql DELETE FROM vacmSecurityToGroupCfg WHERE Name = <oldSnmpCommunity>

n Account

n sql UPDATE passwordCfg SET Admin Username <NewuserName>

n sql UPDATE passwordCfg SET Admin Password <password>, Confirm Admin Password<password>

Operating System ManagementNA

Device monitoringn dir

n arp

n version

n type config.csv

n ping <ip address>



Running Yes Yes NA ASCII TELNET,SSH,TELNET/TFTP, SSH/TFTP


VMware, Inc. 675



ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces No Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No Yes



VLANs No No


n Being a menu based device, only discovery using SNMP is supported.

n There is no post operation as the device reboots itself after a configuration push.

n Interfaces pull is supported using SNMP only.


VMware, Inc. 676

Samsung Devices 79This chapter contains the following topic:

n Samsung Router

Samsung RouterDevice Type Router

Specific Model(s) iBG1000, iBG2006, iBG2016

Operating System and Firmware Versions iBG1000_Advanced_1.6.1.4.Z

Communication Protocols SSH/Telnet, Telnet/FTP, SSH/FTP






Quick Commands

Ping, Traceroute, Setup Diagnostic, View DiagnosticSetup, Setup NAT, View NAT Setup, ViewDiagnostic,Route,ARP,

Interfaces

Features available


Auto-Discovery Yes



Configlets Yes





VMware, Inc. 677


SNMP Traps No

Syslog No

Rollback No

Quick Commands Yes



Discovery/Identify methodsThe following information must be available for this driver class to manage an applicable device.

n SNMP

n sysObjectID value contains .236.4.1.12.1.4

n Get serial number from 1.3.6.1.4.1.236.4.1.12.2.1.1.5.1.4.1

n Terminal

n The output of show system configuration contains model name and serial number.

n The output of show hostname contains hostname of the device.


Configuration capturen Terminal:

n show run no_pageBreak


n Terminal/TFTP

n FTP startup config file to device.

Configuration deployn Terminal (only for single config file)


n Terminal/TFTP

Config files can be pushed to the device as startup-configuration-properties file.

n FTP the config file from the NCM to the device .


VMware, Inc. 678


n user <username> level <level> password <password>>

n no user <oldUser>

n SNMP

n snmp-server community <community> ro|rw



n show system configuration

n show hostname

n ping

n trace

n show run no_pageBreak


n show arp

n show route-map

n show ip interfaces brief

n show snmp status

n reboot



Running Configuration Yes Yes Copy to Startup TEXT SSH,Telnet,SSH,Telnet/FTP

Startup Configuration Yes Yes Reboot TEXT SSH,Telnet/FTP,SSH,Telnet


VMware, Inc. 679



ARP Table No Yes


CAM Table No No


Identity Yes Yes

Interfaces No Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No Yes



VLANs No No

Known issuesSamsung iBG1000 does not support PUSH opertaion to push existing configurations changes throughConfig mode.


VMware, Inc. 680

SEL Devices 80This chapter contains the following topic:

n SEL Switch

SEL SwitchDevice Type Router

Specific Model(s) SEL-2730M


Communication Protocols SNMP, HTTP




Credential Management SNMP v1/v2/v3, Account



Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

Syslog Yes

VMware, Inc. 681


Rollback No

Quick Commands No




n SNMP



Configuration capturen HTTP:

n Login to the device by posting username and password topost:hostname(<DEVADDR>):ssl(true):/auth.sel

n From HTTP response, retrieve session_id and post it topost:hostname(<DEVADDR>):ssl(true):/do_export.sel

n Check the status of configuration file generation usingpost:hostname(<DEVADDR>):ssl(true):/status.sel

n If status returns 'done', start file download usingpost:hostname(<DEVADDR>):ssl(true):/downloads/export_settings.xml

n Logout of the device post:hostname("+DEVADDR+"):ssl(true):/logout.sel"

Configuration deployn HTTP

n Login to the device by posting username and passwordtopost:hostname(<DEVADDR>):ssl(true):/auth.sel

n From HTTP response, retrieve session_id and post it topost:hostname(<DEVADDR>):ssl(true):/do_import.sel

n Check for status “FM_UPLOAD_COMPLETE” for completion for configuration file upload usingpost:hostname(<DEVADDR>):ssl(true):/status.sel

n Device restarts after successful file upload. Wait until the device reboots and check the status insyslog report using post:hostname(<DEVADDR>):ssl(true):/ syslog_report_data.sel


VMware, Inc. 682

n Logout of the device post:hostname("+DEVADDR+"):ssl(true):/logout.sel"

SEL configuration settings can be changed from NCM using configlet push or Automation library.Http page should be given first followed by http parameters one in each line and should be endedwith http_param_end. All settings require session_id and session_username which will be passedfrom NCM to SEL switch.

For example banner can be changed using below steps.

GET/usage_policy_save.sel?usage_policy=Somethinghere&session_username=<user-name>&session_id=<session-id>

To change/set Banner settings:

usage_policy_save.sel

usage_policy="This%20is%20a%20test%20banner";

http_param_end

Params Comment

usage_policy_save.sel Http page

usage_policy="This%20is%20a%20test%20banner"; Banner to be set. "%20" should be given for space

http_param_end NCM defined param to denote any of http parameters


Account user password can be changed using "Update Credential".

Steps for Account Credential update

n In Device->Properties->Communication Tab, check if proper account credential is assigned.

n Perform test credential to check if the account credential assigned is valid. Ex: admin andadmin@123.

n Create a different user with new password in NCM. Ex: test and test@123 in NCM.

n In update credential, select new account and schedule the job. ( "save only" option should NOTbe selected.)

n If job is successful, try logging into SEL device using new credential.

n Lastly, from NCM GUI, old credential should be selected using "save only" option in UpdateCredential.

n SNMP

SNMP v1/v2/v3 community string can be changed through configlet push and cannot be changedusing "Update Credential".

To change SNMP v2 community string:


VMware, Inc. 683

edit_snmp_user_save.sel

test

ro_comm_string=test

can_trap=True

can_read=True

config_type=2

http_param_end

Params Comment

edit_snmp_user_save.sel Http page

test Name of SNMP profile for which community string is to be changed.SNMP profile name is configured in SEL GUI.This should be givenimmediately after the http page.

ro_comm_string=test New community string

can_trap=True Trap enabled

can_read=True Read enabled

config_type=2 SNMP version 2

http_param_end NCM defined param to denote any of http parameters

Device monitoringn SNMP Based



Running Configuration Yes Yes N.A. ASCII HTTP



ARP Table No Yes


CAM Table No No


Identity No Yes


VMware, Inc. 684


Interfaces No Yes

Keys No No

Memory No Yes


OSPF Settings No No


Routes No No



VLANs No No

Known IssuesNote that, the SEL Driver supports config pull, configlet push & Credential management with NCM 9.5.0.2build only or above.


VMware, Inc. 685

Siemens Devices 81This chapter includes the following topics:

n Siemens Router

n Siemens hiX56xx DSLAM

Siemens RouterDevice Type Router

Specific Model(s) 5851, 5871, 5940









Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

VMware, Inc. 686


Syslog No

Rollback Yes

Quick Commands Yes




n SNMP

n sysDescr contains "Siemens" or "Efficient".


n Terminal

n The output of version command contains "^((Siemens|Efficient) ([0-9]+) .*)$".

n The output of sys name command contains "System name: <(.*)>".


Configuration capturen Terminal: (only for single config files)

n system configlist all

n Terminal/TFTP

n copy <filename> tftp@<serverIPAddress>:<localFilename>

Configuration deployn Terminal (only for single config file)



n Terminal/TFTP

n copy tftp@<serverIPAddress>:<localFilename> <filename>


VMware, Inc. 687


n user set password <username> <password>

n user delete user <username>

n user add user <username> <password> super enable

n system admin <username>

n save

n SNMP

n system community|writecommunity <newCommunity>

n save

Device monitoringn version

n sys name

n msfs

n sys name

n sys contact

n sys location

n ifs

n ipifs

n eth list

n exit

n boot

n ping

n dir

n system configlist all



VMware, Inc. 688


Config Yes Yes Save Config, Reboot ASCII SSH, Telnet,SSH/TFTP,Telnet/TFTP

Text Config Files Yes Yes Save Config, Reboot ASCII SSH, Telnet,SSH/TFTP,Telnet/TFTP

Binary Config Files Yes Yes Save Config, Reboot Binary SSH/TFTP,Telnet/TFTP



ARP Table No Yes


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory Yes No


OSPF Settings No No


Routes No Yes



VLANs No No

Siemens hiX56xx DSLAMDevice Type Switch


Operating System and Firmware Versions R1.5

Communication Protocols SSH, Telnet




VMware, Inc. 689


Credential Management Privilege, SNMP v1/v2


Quick Commands View Routes, View ARP, View Interfaces, Resync

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

Syslog No

Rollback No

Quick Commands Yes




n SNMP

n sysDescr contains "^hiX56[0-9][0-9]"


n Terminal

n Get the model number from the output of show system-version command by matching theregular expression "hiX([^/]+)/".

n Get the MAC Address from the output of show interface mgmt command by matching theregular expression "address is ([0-9a-f\\.]+)$".

n Get the Hostname from the output of show running-config hostname command by matchingthe regular expression "hostname +(.*)$".


VMware, Inc. 690








Credential managementn Privilege

n passwd enable <newPrivPass>

n SNMP

n snmp community ro|rw <newSnmpCommunity>

Device monitoringn terminal length …

n enable

n exit


n end


n reboot

n ping

n show ip route database

n show interface

n show arp

n show flash


VMware, Inc. 691

n show memory



Running-config Yes Yes Copy To Start ASCII SSH, Telnet

Startup-config No Yes NA ASCII SSH, Telnet



ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes No


OSPF Settings No No


Routes Yes Yes



VLANs No No


n As of system version R1.5, the configuration that is output from a show running-config or showstartup-config cannot be pushed back to the device without significant editing, due to the following:

n Commands that enter a subconfiguration editor, but do not exit from the subsection appropriately.


VMware, Inc. 692

n Commands that exit too many times from a subsection, ending configuration mode entirely, andthereby causing subsequent commands to fail.

n Too many exit commands example:

ip dhcp option82 policy drop

!

!End of DHCP daemon's configuration

!

! --- eqm - BEGIN ------------------

configure terminal

rack alarm-severity-profile 1

...

card alarm-severity-profile 17 1

exit <<< Exit Config Mode

! --- eqm - END---------------------

!

no debug red-mgr

sw-keepalive

...

!

End <<< Exit Config Mode, too many times.

n Use of EXEC mode syntax in configuration mode commands. For example, our test deviceproduces the following (abridged) config:

¢ EXEC mode command example:

!configdb_version 1

hostname SG1-ARC146-VIL

terminal length 0 <<<This is an EXEC mode command.

login accounting-mode none

bridge

! start> --- tracelevel submodules swchd ---

debug switch vlan 3

n Startup configuration can be changed only by use of the Copy to Start functionality after pushing tothe running configuration.


VMware, Inc. 693

Solaris Devices 82This chapter contains the following topic:

n Solaris

SolarisDevice Type Solaris Server

Operating System and Firmware Versions Solaris - 10

Communication Protocols SSH, TELNET, TELNET/FTP, SSH/TFTP






Quick Commands Finger, ps, Ping, Traceroute, View Arp, View Interfaces, View Routes

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

Syslog No

Rollback No

VMware, Inc. 694


Quick Commands Yes




n SSH/TELNET

n Command "uname -a" to know its Linux server.

n Command "hostname" should provide hostname of the device

n Command "sneep" should provide serial number

n Command "uname -pi" should provide model


n ASCII config is pulled using SSH/SCP, TELNET/FTP, SSH/FTP, SSH/TFTP


n Text configuration data can be pushed using SSH/SCP, TELNET/FTP, SSH/FTP, SSH/TFTP




"passwd username"




VMware, Inc. 695


/etc/passwd Yes Yes NA ASCII SSH/SCP,TELNET/FTP,SSH/FTP,SSH/TFTP

/etc/group Yes Yes NA ASCII SSH/SCP,TELNET/FTP,SSH/FTP,SSH/TFTP

/etc/hosts Yes Yes NA ASCII SSH/SCP,TELNET/FTP,SSH/FTP,SSH/TFTP

/etc/release Yes Yes NA ASCII SSH/SCP,TELNET/FTP,SSH/FTP,SSH/TFTP




Identity Yes No

Interfaces Yes No

Memory Yes No




VMware, Inc. 696

SourceFire Devices 83This chapter contains the following topic:

n Sourcefire 3D Sensor

Sourcefire 3D SensorDevice Type Other

Specific Model(s) 3D Sensor 2100

Operating System and Firmware Versions 4.8.0 -12







Quick Commands

Ping, View Description, View Model, View OsVersion, ViewSerialNo, Up Time, View Interfaces, View Routes, View Arp, ViewMemory Information, View File System Information, View HardwareInventory

Features available


Auto-Discovery Yes



Configlets No





VMware, Inc. 697


SNMP Traps No

Syslog Yes

Rollback Yes

Quick Commands Yes




n Terminal

n /etc/sf/model.conf file must contain the model information as a string 3D Sensor 2100.

n Serial number must be available through hostid command.



n configuration files are pulled using standard unix commands


n configuration files are pushed using standard unix commands


n passwd

n <password>

n <password>

Device monitoringn df -akT

n cat /proc/meminfo

n hostname


VMware, Inc. 698

n grep …

n uname -a

n cat …

n hostid

n lspci

n ifconfig -a

n uptime

n reboot



/etc/ldap.conf Yes Yes NA ASCII SSH/SCP

/etc/modules.conf Yes Yes NA ASCII SSH/SCP

/etc/my.cnf Yes Yes NA ASCII SSH/SCP





/etc/syslog.conf Yes Yes NA ASCII SSH/SCP

/etc/cron.d/sfcrontab Yes Yes NA ASCII SSH/SCP

/etc/openldap/ldap.conf Yes Yes NA ASCII SSH/SCP

/etc/pam.d/system-auth Yes Yes NA ASCII SSH/SCP

/etc/ssh/sshd_config Yes Yes NA ASCII SSH/SCP

/etc/sysconfig/* Yes Yes NA ASCII SSH/SCP

/etc/sysconfig/network-devices/*


/etc/sf/* Yes Yes NA ASCII SSH/SCP

/etc/sf/de_init Yes Yes NA Binary SSH/SCP

/etc/sf/eula.agree Yes Yes NA Binary SSH/SCP

/etc/sf/initial_install.dat Yes Yes NA Binary SSH/SCP

/etc/sf/feature/* Yes Yes NA Binary SSH/SCP

/etc/sf/keys/*.pkcs12* Yes Yes NA Binary SSH/SCP

/etc/sf/keys/*.pkcs12* Yes Yes NA ASCII SSH/SCP


VMware, Inc. 699


/var/sfcron.d/* Yes Yes NA ASCII SSH/SCP

/var/sf/managed/* Yes Yes NA ASCII SSH/SCP

/var/sf/peers/sftunnel-status Yes Yes NA ASCII SSH/SCP

/var/sf/peers/managed Yes Yes NA ASCII SSH/SCP

/var/sf/remediations/* Yes Yes NA ASCII SSH/SCP

/var/sf/rules/* Yes Yes NA ASCII SSH/SCP

/var/sf/time_series/* Yes Yes NA ASCII SSH/SCP

/var/sf/snorty/* Yes Yes NA ASCII SSH/SCP



ARP Table Yes No


CAM Table No No


Identity Yes No

Interfaces Yes No

Keys No No

Memory Yes No


OSPF Settings No No


Routes Yes No

System Properties (Serial Number, OS Version, etc) No No


VLANs No No


n SNMP is not supported.


VMware, Inc. 700

Starent Devices 84This chapter contains the following topic:

n Starent PDSN

Starent PDSNDevice Type Router

Specific Model(s) ST16, ST20, ST40, ASR5000








Quick CommandsPing, Traceroute, View Interfaces, View Routes, View Arp, Set NumBackups Kept

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

VMware, Inc. 701


Syslog Yes

Rollback Yes

Quick Commands Yes




n SNMP

n Get the Chassis Type from ".1.3.6.1.4.1.8164.1.1.10.0" OID and determine the model on thebasis of that.



n save configuration /flash/<filename> -noconfirm verbose

n show file url /flash/<filename>

n Terminal/TFTP

n save configuration tftp://<serverIPAddress>/<filename> -noconfirm verbose





n config

n context local

n administrator <userName> password <password>



VMware, Inc. 702

n SNMP

n config

n snmp community <newSnmpCommunity> read-only|read-write

n no snmp community <oldSnmpCommunity>

Device monitoringn config

n reload -noconfirm

n directory …

n show resources cpu

n context local

n end

n term length 0

n show boot initial-config

n ping

n traceroute

n show ip interface



Running Yes Yes NA ASCII SSH, Telnet,SSH/TFTP,Telnet/TFTP



ARP Table No Yes


CAM Table No No


Identity No Yes


VMware, Inc. 703


Interfaces No Yes

Keys No No

Memory Yes No


OSPF Settings No No


Routes No Yes



VLANs No No

Known issuesThe following existing device issues have been discovered within other releases. A resolution is includedto address the issue, if available.

n When running config is pushed it is automatically copied to startup config.


VMware, Inc. 704

Symbol Devices 85This chapter includes the following topics:

n Symbol WS-2000

n Symbol RFS

Symbol WS-2000Device Type Switch

Specific Model(s) Symbol WS-2000

Operating System and Firmware Versions 1.5.0, 1.5.1, 2.0.0, 2.0.1, 2.0.2

Communication Protocols SNMP/TFTP, SSH, Telnet, SSH/TFTP, Telnet/TFTP






Quick Commands Device Uptime, Interface Summary

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

VMware, Inc. 705


Syslog No

Rollback Yes

Quick Commands Yes




n SNMP

n sysDescr contains "Symbol WS"


n sysServices is 0x2

n Terminal

n Get model from the output of summary command by matching the regular expression"([[:alnum:]]+) firmware version "

n Get the Serial number from the output of show wan command by matching the regularexpression "ethernet address.*:.*([0-9A-Fa-f]{12})"

n Get the system name from the output of the show all command by matching the regularexpression "system name *: *(.+)$"



n Server IP Host (a.b.c.d)

n 1.3.6.1.4.1.388.11.2.2.6.1.0

n TFTP Operation

n 1.3.6.1.4.1.388.11.2.2.4.1.0

unspecified;

ftpSrvToSwitch;

ftpSwitchToSrv;


VMware, Inc. 706

tftpSrvToSwitch;

tftpSwitchToSrv;

n Filename

n 1.3.6.1.4.1.388.11.2.2.4.3.0

n Start the transfer

n 1.3.6.1.4.1.388.11.2.2.4.4.0

n Operation count

n 1.3.6.1.4.1.388.11.2.2.4.5.0

n Operation result string

n 1.3.6.1.4.1.388.11.2.2.4.6.0

n Operation success string

n 1.3.6.1.4.1.388.11.2.2.4.7.0

n Terminal

n system

n config

n export terminal

n Terminal/TFTP

n system

n config

n set server <serverIPAddress>

n set file <filename>

n export tftp


n Same as mentioned in case of 'Configuration Capture' section

n Terminal



n Terminal/TFTP

n system


VMware, Inc. 707

n config

n set server <serverIPAddress>

n set file <filename>

n import tftp


n passwd admin

n <oldPassword>

n <newPassword>

n <newPassword>

n SNMP

n system

n snmp

n access

n delete v1v2c <communityIndex>

n add v1v2c <newSnmpCommunity> ro|rw <communityOID>

n save

Operating System managementThe Symbol Device Driver supports OS upgrade and downgrade using telnet and SSH login protocolsand FTP/TFTP file transfer mechanisms.

The Symbol firmware releases 1.5.0, 1.5.1, 2.0.0, and 2.1.0 have all been qualified and tested with theupgrade/downgrade process. One issue was found when completing an upgrade or downgrade betweenthe 2.0.0 and 2.1.0 releases using the SSH protocol.

The Symbol device 2.0.0 and 2.1.0 firmware returns different fingerprints for the RSA key. Therefore, afterthe upgrade/downgrade, attempts to login using SSH will fail, due to the key exchange.

From the application, the per/downgrade will show Failed, based on failure to login following the devicereboot, due to SSH host key verification. Suggestions for managing this issue are as follows.

n If possible at your site, using telnet for the OS upgrade/downgrade between 2.0.0 and 2.1.0 allowsthe process to proceed normally and return status of the state of the device.

n If using SSH for OS upgrade, check the error status looking for a successful upload, followed by anSSH failure to connect. This is the failure signature indicating the RSA key mismatch betweenfirmware releases.


VMware, Inc. 708

n In either case, you need to update the SSH host key database on the HP device server to regainaccess to the device.

n For Linux and Solaris Servers: The SSH key database is located in the ~root/.ssh/sshhostkeysfile. Edit the sshhostkeys file, and remove the entry associated with the Symbol device based onIP address.

n For Windows Servers: The host key database is maintained in the Registry, in theHKEY_LOCAL_MACHINE\SOFTWARE\Voyence\Control\SshHostKeys folder. Using the regeditutility, remove the entry associated with the Symbol device based on IP address.

Device monitoringn system

n exec df -T

n summary

n stats

n show wan

n system

n show all

n restart

n config

n list v1v2c

n save



running Yes Yes Copy to Start ASCII SNMP/TFTP, SSH,Telnet, SSH/TFTP,Telnet/TFTP



ARP Table No Yes



VMware, Inc. 709


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes No


OSPF Settings No No


Routes No Yes



VLANs No No

Symbol RFSDevice Type Wireless Switch

Specific Model(s) RFS-6000, RFS-7000

Operating System and Firmware Versions 5.8.5.0-016R and 4.3.3.0-004R

Communication Protocols

Telnet, SSH, Telnet/FTP, SSH/FTP, SSH/SCP,

Telnet/TFTP, SSH/TFTP






Quick Commands traceroute, routes, arp, interface

Features available


Auto-Discovery Yes



Configlets No



VMware, Inc. 710





SNMP Traps Yes

Syslog No

Rollback Yes

Quick Commands Yes




n SNMP


n Terminal


n Model must map to sysObjectID in SymbolRFSModels.xml .


Configuration capturen SNMP : Not Available

n For Telnet and SSH

n running: show run (show config if show run fails)

n startup: show config (show start if show config fails)

n For Telnet/TFTP and SSH/TFTP

n running: write net ipAddress filename

n startup: same approach as startup for Telnet and SSH above

Configuration deployNA


VMware, Inc. 711

Credential managementNA

Device monitoringn show ip interface

n show ip route

n show ip access-list

n show mac address table

n show interface



running No Yes NA ASCII Telnet/TFTP,

SSH/TFTP

startup No Yes NA ASCII Telnet/TFTP,

SSH/TFTP



ARP Table Yes Yes


CAM Table Yes Yes


Identity Yes Yes

Interfaces No Yes

Keys No No

Memory No No

OSPF Settings No No


Routes Yes No



VMware, Inc. 712



VLANs No No


VMware, Inc. 713

Tasman Devices 86This chapter contains the following topic:

n Tasman Router

Tasman RouterDevice Type Router

Specific Model(s)1004E, 1001, 1002, 1002E, 1200, 1200C, 1200E, 1200EC, 1250, 1400,1400E, 1450, 4100, 4102, 6300








Quick Commands Resync, Ping, Traceroute, View Routes, View Arp, View Interfaces

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps Yes

VMware, Inc. 714


Syslog Yes

Rollback Yes

Quick Commands Yes




n SNMP

n sysDescr contains "Tasman" or sysObjectID contains ".3174.1." or ".562.73."

n Terminal

n Get the Hostname from the output of show hostname command by matching the regularexpression "[Hh]ost[Nn]ame: (.*)".

n Get the Model from the output of show system configuration command by matching the regularexpression "Model Number: *(.*)".

n Get the sysObjectID from models file





n show configuration running

n show configuration stored

n Terminal/TFTP

n save network <serverIPAddress> <filename>

n file upload flash_file <serverIPAddress> system.cfg <filename>




VMware, Inc. 715


n Terminal/TFTP

n file download <serverIPAddress> <filename> system.cfg

n configure network

n <serverIPaddress>

n <filename>


n admin_name <userName>

n password

n <userName>

n <oldPassword>

n <newPassword>

n <newPassword>

n SNMP

n no community <oldSnmpCommunity> ro | rw

n community <newSnmpCommunity> ro | rw

Operating System managementn file download <serverIPAddress> <srcFilename> <destFilename>


n show system configuration

n dir

n configure term

n exit

n show hostname

n show version

n show system memory

n show system flash

n show interface …


VMware, Inc. 716

n ping

n race

n show ip routes

n show arp

n show system diagnostics




Startup Yes Yes Reboot ASCII SSH, Telnet,SSH/TFTP,Telnet/TFTP



ARP Table No No


CAM Table No No


Identity Yes Yes

Interfaces No Yes

Keys No No

Memory Yes No


OSPF Settings No No


Routes No Yes



VLANs No No


VMware, Inc. 717


Tasman Family of Devices

n Tasman uses the concept of account levels. Currently, devices get Auto Discovered with low levelaccounts, but can not successfully complete a Pull. To Pull devices, you must ensure the devices aresetup with Level 1 accounts.

Tasman TIOS

n Tasman TIOS does not allow changing the Admin Name using SSH. You must use TELNET.


VMware, Inc. 718

Telco Devices 87This chapter includes the following topics:

n Telco Switch

n Telco T-Metro

Telco SwitchDevice Type Switch

Specific Model(s) T5CL3-24G 256M, T-Marc-250, T-Marc-254


T5CL3-24G 256M: BinOS 6.5.5

T-Marc-250: BinOS 6.6.3.4

T-Marc-254: BinOS 6.6.3.4







Quick Commands Ping, Traceroute, View Routes, View Interfaces

Features available


Auto-Discovery Yes



Configlets Yes




VMware, Inc. 719



SNMP Traps No

Syslog No

Rollback Yes

Quick Commands Yes




n SNMP

n sysObjectID contains either 1.3.6.1.4.1.738.1.5.100.1.1.10 or 1.3.6.1.4.1.738.1.5.100.1.1.17

n Serial Number is retrieved from OID .1.3.6.1.4.1.738.1.5.100.1.3.1.0





n Terminal/TFTP

n copy running-config upload-to <serverIPAddress> <filename>

n copy startup-config upload-to <serverIPAddress> <filename>




n Terminal/TFTP

n copy running-config download-from <serverIPAddress> <filename>

n copy startup-config download-from <serverIPAddress> <filename>


VMware, Inc. 720


n username <userName> password <password> <password> group administrators


n Privilege

n enable password <newPrivPassword> <newPrivPassword>

n SNMP

n Get the commands from "running-config" for adding Snmp Community string and send those.

n no snmp-server user <oldString>

n no snmp-server access-list <oldString>

Device monitoringn no terminal length

n terminal length 0

n enable

n disable

n exit



n ping

n traceroute

n show ip route

n show ip interface




Startup Yes Yes NA ASCII SSH, Telnet,SSH/TFTP,Telnet/TFTP


VMware, Inc. 721



ARP Table No No


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No No



VLANs No No


n Either Telnet/TFTP or SSH/TFTP must be enabled to push configurations. Commands issued to theCLI do not merge with the running configuration.

n The Configuration Editor does not analyze the content for the type of line termination. To insert blanklines in banner pages, at least one space-character must be present.

n Account and privilege password management is present but unverified.

n SNMP credential rolls require non-blank credentials.

Telco T-MetroDevice Type Switch

Specific Model(s) T-Metro 256M

Operating System and Firmware Versions 7.0.R2



VMware, Inc. 722






Quick Commands Ping, Traceroute, View Routes, View Interfaces

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

Syslog No

Rollback Yes

Quick Commands Yes




n SNMP

n sysObjectID contains 1.3.6.1.4.1.738.1.5.100.1.1.16




VMware, Inc. 723




n Terminal/TFTP






n Terminal/TFTP

n copy tftp://<serverIPAddress>/<filename> running-config

n copy tftp://<serverIPAddress>/<filename> startup-config


n username <userName> password <password> <password> group administrators


n Privilege

n enable password <newPrivPassword> <newPrivPassword>

n SNMP

n Get the commands from "running-config" for adding Snmp Community string and send those.

n no snmp-server user <oldString>

n no snmp-server access-list <oldString>

Device monitoringn no terminal length

n terminal length 0

n enable

n disable


VMware, Inc. 724

n exit



n ping

n traceroute

n show ip route

n show ip interface

Multi-config filesFollowing are the files used when storing and revisioning multiple configuration files for multi-configsupport. .



Startup Yes Yes NA ASCII SSH, Telnet,SSH/TFTP,Telnet/TFTP



ARP Table No No


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No No



VMware, Inc. 725



VLANs No No


n Either Telnet/TFTP or SSH/TFTP must be enabled to push configurations. Commands issued to theCLI do not merge with the running configuration.

n The Configuration Editor does not analyze the content for the type of line termination. To insert blanklines in banner pages, at least one space-character must be present.

n Account and privilege password management is present but unverified.

n SNMP credential rolls require non-blank credentials.


VMware, Inc. 726

Vanguard Devices 88This chapter contains the following topic:

n Vanguard Router

Vanguard RouterDevice Type Router


Operating System and Firmware Versions V7.1.R00A_@Seven_3400








Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

Syslog No

VMware, Inc. 727


Rollback Yes

Quick Commands Yes




n SNMP




Configuration capturen Terminal/TFTP:

n tftp getscript <filename> <serverIPAddress>




n Terminal/TFTP:

n tftp setscript <filename> <serverIPAddress>


n Go to Main Menu and select the option "Update system parameters" to change the password.

n SNMP

n Go to Main Menu and select the option "Configure" to change the snmp community



VMware, Inc. 728

n traceroute

n show ip route

n show ip interface

n show arp



Running Yes Yes NA ASCII TELNET, SSH,TELNET/TFTP,SSH/TFTP



ARP Table No Yes


CAM Table No No


Identity No Yes

Interfaces No Yes

Keys No No

Memory No No


OSPF Settings No No


Routes No Yes



VLANs No No


VMware, Inc. 729


n Only one session can be logged into the device at a time.

n SNMP community string changes require a reboot per credential to take effect.


VMware, Inc. 730

VegaStream Devices 89This chapter contains the following topics:

n VegaStream Vega400

VegaStream Vega400Device Type Voip Device

Specific Model(s) Vega400


Communication Protocols SSH/Telnet and SNMP



Discovery/Identify Methods SSH/Telnet, SNMP



Quick Commands

View Interfaces,

Ping,

Traceroute

Features available


Auto-Discovery Yes



Configlets Yes





VMware, Inc. 731


SNMP Traps No

Syslog No

Rollback No

Quick Commands Yes




n SSH/TELNET

n Command “show version” should provide serial number.

n Command “show banner” should provide hostname of the device



n sput

n Terminal/FTP

n put ftp:<LOCALFILE>


n TPush by sending each line through the command-line interface.


n Terminal/FTP

n get ftp:<REMOTEFILE>




VMware, Inc. 732

Device monitoringn show banner

n show version

n show ports

n show lan route

n show arp

n show stats

n save



running Yes Yes copyToStart ASCII SSH, Telnet FTP



ARP Table Yes Yes


Identity Yes Yes

Interfaces Yes Yes

Memory Yes No


Routes Yes Yes



n Device behaves inconsistently while pushing config using ftp.

n Device icon will not be displayed for this device.


VMware, Inc. 733

Vyatta Devices 90This chapter contains the following topic:

n Vyatta Router

Vyatta RouterDevice Type Router

Specific Model(s) ROUTER

Operating System and Firmware Versions VC5.0.2







Quick Commands Ping, Traceroute, View Interfaces, View Routes, View Arp

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

Syslog No

VMware, Inc. 734


Rollback Yes

Quick Commands Yes




n SNMP

n Get the Model based on sysObjectID from the models file


n sysDescr contains "[Vv]yatta"

n Get the Hostname

n Terminal

n The output of show version command matches to "(?i)^Copyright:\\s+.*Vyatta" regularexpression

n Get model from the output of #VyattaRouter# command by matching the regular expression"#(VyattaRouter)#"

n Get the sysObjectID based on Model from models file

n Get the Serial number from the output of show interfaces ethernet eth0 | match ethercommand by matching the regular expression "/ether +([a-fA-F0-9:]{17})"

n Get the Hostname from the output of the show configuration |match host-name command bymatching the regular expression "host-name +(.+)$"



n show configuration all

n cat /opt/vyatta/etc/config/config.boot

n Terminal/TFTP

n save tftp://<serverIPAddress>/<filename>

n tftp -p -l /opt/vyatta/etc/config/config.boot -r /<filename> <serverIPAddress>


VMware, Inc. 735




n Terminal/TFTP

n load tftp://<serverIPAddress>/<filename>

n tftp -g -l /opt/vyatta/etc/config/config.boot -r <filename> <serverIPAddress>


n set system login user <userName>

n set system login user <username> full-name "<userName> -IonixNCM-"

n set system login user <username> authentication plaintext-password <password>

n set system login user <username> level admin

n SNMP

n set protocols snmp community <newSnmpCommunity>

n edit protocols snmp community <newSnmpCommunity>

n set authorization ro | rw

n top

n delete protocols snmp community <oldSnmpCommunity>

Device monitoringn show system memory

n df -k

n save

n reboot

n show interfaces detail

n show version

n show arp

n show ip route

n ping

n traceroute


VMware, Inc. 736

n terminal length …



running Yes Yes Copy to Start ASCII SSH, Telnet,SSH/TFTP,Telnet/TFTP

startup Yes Yes Reboot ASCII SSH, Telnet,SSH/TFTP,Telnet/TFTP



ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes No


OSPF Settings No No


Routes Yes Yes



VLANs No No


VMware, Inc. 737

Wilibox Devices 91This chapter contains the following topic:

n Wilibox WILI-S

Wilibox WILI-SDevice Type Wireless Access Point

Specific Model(s) RDAT-81

Operating System and Firmware Versions WILI-S 5.24, WILI-S 5.26

Communication Protocols SSH






Quick Commands View Status, View Interfaces

Features available


Auto-Discovery Yes



Configlets No





SNMP Traps No

Syslog No

VMware, Inc. 738


Rollback Yes

Quick Commands Yes




n SNMP

n sysDescr contains "WILIBOX"


n Terminal

n Get model from the output of status command by matching the regular expression "Hardwarerevision: +(\\S+)"

n Get the MAC Address from the output of status command by matching the regular expression"([0-9a-fA-F\:]{17})"



n show


n Send individual lines of configuration to a temporary file.

n After an entire configuration file is sent, the temporary file is verified to exist and have a non-zerosize.

n The temporary file is copied to the system configuration file, /tmp/system.cfg.

n The configuration is written to flash using the sysconf -w command.


n passwd


VMware, Inc. 739

n <oldPassword>

n <newPassword>

n <newPassword>

Device monitoringn ifconfig -a

n show

n exit

n status



Running Yes Yes Reboot ASCII SSH



ARP Table No Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes Yes


OSPF Settings No No


Routes No Yes



VLANs No No


VMware, Inc. 740


n A configuration capture shows what is in flash on the device. This device requires a reboot forconfiguration changes to take effect, therefore the flash may not always reflect what is currentlyrunning.

n Issue: SNMP credential changes are not supported, due to lack of command line support in thedevice.

Resolution: Change the SNMP credentials within the configuration file.

n Issue: Account changes are limited to the password changes of existing accounts. New accountcreation is not supported, due to the lack of command line support in the device.

Resolution: Edit the configuration file with the appropriate lines to create new users.


VMware, Inc. 741

Zeus Devices 92This chapter contains the following topic:

n Zeus Load Balancer

Zeus Load BalancerDevice Type Load Balancer

Specific Model(s) Zeus Traffic Manager









Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

Syslog No

VMware, Inc. 742


Rollback No

Quick Commands Yes




n Terminal

n Get model, OS Version and Serial Number from the output of show Info and show LicenseKey



n show *




Device monitoringn System.MachineInfo.getIPAddresses

n System.MachineInfo.getMACAddresses

n show *

n show Info

n show LicenseKey



VMware, Inc. 743


readonly Yes Yes NA ASCII SSH, Telnet



ARP Table No No


CAM Table No No


Identity No Yes

Interfaces Yes No

Keys No No

Memory No No


OSPF Settings No No


Routes No No



VLANs No No


n SNMP discovery is not supported on this device because the SNMPv1 agent appears to respond withonly the system name,.

n An account must be created on the host operating system with the same password as that used forthe Zeus command line interpreter (zcli). This executable must be set as the shell for the accountlogin. Implementation details are not contained in this document

n Since the device runs as a service on a Linux, Solaris, or VMware-based operating system, accountcredentials cannot be managed. Support for the following commands was not available when thedriver was developed:

n Users.addUser

n Users.changePassword


VMware, Inc. 744

n Users.deleteUser

n Users.listUsers

n Device file management, backup, and restore operations are not supported, due to the lack ofsufficient support for HTTP POST operations in the current version of the product.

n A device with an expired license key will fail discovery. This is due to the driver using show license todetermine the license key in place of the normally blank hardware serial number.


VMware, Inc. 745

Zyxel Devices 93This chapter contains the following topic:

n Zyxel Prestige

Zyxel PrestigeDevice Type Router

Specific Model(s) p660r-61

Operating System and Firmware Versions V3.40(QG1)_20040824

Communication Protocols Telnet, Telnet/FTP

Configuration Files Content Binary





Quick Commands Ping

Features available


Auto-Discovery Yes



Configlets No





SNMP Traps Yes

Syslog Yes

VMware, Inc. 746


Rollback Yes

Quick Commands Yes




n SNMP

n sysObjectID value contains "1.3.6.1.4.1.890"

n sysDescr value contains "Prestige"



n FTP the configuration file rom-0 to NCM




n sys password <password>

n SNMP

n Select the correct option from Menu and change the community

Device Monitoringn sys atsh

n sys display

n ip ping

n ip arp status

n ip ifconfig


VMware, Inc. 747

n exit



Configuration Yes Yes NA Binary Telnet/FTP



ARP Table Yes Yes


CAM Table No No


Identity Yes Yes

Interfaces Yes Yes

Keys No No

Memory Yes No


OSPF Settings No No


Routes Yes Yes



VLANs No No


n Only Total Memory is available.

n The user must ensure the the push process is not interrupted as the device can be permanentlydamaged.


VMware, Inc. 748

n Using SNMP, the RO/RW credential validation done can fail due to a known timing issue. This cannotbe addressed using device driver technology.

n Push of configuration file reboots the device automatically.

n The following interface states (getInterfaces.dlg) cannot be determined from the command-lineinterface output. The default value is set to UP.

n adminState

n operationalState

n addrtype [for IpAddressAndMask field]


VMware, Inc. 749

ZTE Devices 94This chapter contains the following topic.

n ZTE

ZTEDevice Type Other

Specific Model(s) ZXA10 C300

Operating System and Firmware Versions V2.6.02A.21







Quick Commands Ping, Traceroute, Reboot

Features available


Auto-Discovery Yes



Configlets Yes





SNMP Traps No

Syslog No

VMware, Inc. 750


Rollback No

Quick Commands Yes




n SNMP

n sysObjectID value contains "1.3.6.1.4.1.3902"

n sysDescr value contains "ROS" or "ZTE".

n Terminal

n The output of show system-group command contains "ROS" or "ZTE" string

n Get the System ObjectId from the output of show system-group command and corresponding tothat System ObjectId, find model from the modelsXML file.






n username <username> password <password> privilege 15


n SNMP

n snmp-server community <newSnmpCommunity> ro | rw


Device monitoringn configure terminal

n ping


VMware, Inc. 751

n trace

n terminal length …

n dir

n show system-group


n show ip route

n show rack

n show shelf

n show card

n show arp

n exit

n reboot



running No Yes NA ASCII SSH, Telnet

startup No Yes NA ASCII SSH, Telnet



ARP Table Yes No


CAM Table No No


Identity Yes Yes

Interfaces Yes No

Keys No No

Memory Yes No


OSPF Settings No No



VMware, Inc. 752


Routes Yes No



VLANs No No

Known IssuesThe following existing device issues have been discovered with other releases. A resolution is included toaddress the issue, if available.

n Serial Number is not available

n For the interfaces got via "show running-config" command, adminStatus and operationalStatus arenot available via terminal, thus putting the default values as 'UP' and "Down" respectively.

n If any config line in the pulled configuration files is more than 80 characters long, it gets split into twolines. As a result, the push of the configuration files results in an error with the message "InvalidInput". Therefore, the push action is not supported.


VMware, Inc. 753

network configuration support (dsr) support matrix version … · 2019-05-08 · nortel passport...

Documents