Netview Without RP1 Manual This manual is aimed for using netview function without rp1. The operator should make the setting both on the bf1 machine and on the bfeditor machine. This manual explains the procedure of setting netview. 1. The setting on the bf1 machine The procedure of setting netview on bf1 machine is shown in the steps below. Step 1: After starting up the system, the bfeditor computer should be mapped as one drive in the bf1 machine. Firstly, click the right button of mouse on the icon of my computer. Then click the Map Network Drive… in the menu.

Step 2: The Map Network Drive dialog box appears. Click the bfeditor computer name you want to map.

Step 3: Choose the path in the bfeditor computer you want to save data to. Then the path will show in the combo box. Choose the drive name. DEVELOP is the name of bfeditor computer. So DEVELOP¥SPC is mapped to G: drive in the bf1 computer. Attention: SPC file folder in the bfeditor computer should be set as share before mapping.

Step 4: In my computer in the bf1 computer, the mapped drive will appear.

Step 5: Then boot the application software, BF1.exe. After starting up the application software, click Edit on the menu bar, and then click System setup.

Step 6: The Select System Setup dialog box appears. Click System button.

Step 7: The System Setup dialog box appears. Enter the line number in the edit box. For example, enter Line 5. Then click OK. Attention: In the Line Number edit box, “ : , ; , ¥ ” shouldn’t be involved.

Step 8: Then it will return to the Select System Setup dialog box, select Output Files.

Step 9: The Output File dialog box appears. Select the check box Output log file for Netview. Enter the mapped drive name (G:) to the edit box. Enter the image number that you want to save in the bfeditor machine, (for example 40 as the following window). This number is the maximum number of the images in one board that are saved in the bfeditor machine. If the Not output False Call Images check box is checked, the False Call images will not appear, only the NG images appear. Then click OK.

Step 10: After making the setting on the bfeditor machine, operate the AOI machine in the Auto mode.

2. The setting on the bfeditor machine The procedure of setting netview on bf1 machine is shown in the steps below. Step 1: Start up the system, and boots the application software, BFeditor.exe. Step 2: After starting up the application software, click Net view on the menu bar, and then click RP1-monitor.

Step 3: The RP1-Monitor window appears. Select File on the menu bar, and then click setting.

Step 4: The Line Setting dialog box appears. Click Without Bfrp1 checkbox. In the File path, please enter the saving path, and then click OK. This saving path is the path in the bfeditor computer you want to save the data to. C:¥ SPC is the path that has been mapped in the bf1 computer, Line 5 is the line number that has been set in the bf1 computer. Attention: SPC file folder should be set as share.

Step 5: Then some colored bars will appear in the RP1-Monitor window. Click the right button of the mouse in the area of one bar.

Step 6: The E:¥Line 5 dialog box appears. Select one log file you want to see. Click OK.

Step 7: Some pie and bar pictures and some curves will appear in the RP1-Monitor window. If you double click the window area, the window will switch to previous window.

Step 8: If you click the right button of the mouse in the area of one colored bar, some images will appear in the RP1-Monitor window. If you double click the window area, it will switch to the previous window.

Step 9: If you click the right button of the mouse on one image, this image will be enlarged separately in the RP1-Monitor window. If you double click the window area, it will switch to the previous window.

Step 10: In the step 6, if you click Day Filters or Hour Filters checkbox, please enter the time you want to see in the report. Then click the button Make Report.

Step 11: The aoi_history file will appear in the web way.