P/N -540-INST-FUL Rev 4AYRD1

Nest x Yale LockInstallation and Programming Guide

Before you begin

for step-by-step installation

instructions & to register

your product

DOWNLOAD

THE BILT APP

Keypad

Check(Set / Continue)

Settings

Speaker

Failsafe 9 voltBattery Connection(Use Alkaline battery)

Warning StatusIndicator

Back button

Low BatteryIndicator

FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN DAMAGE TO THE PRODUCT AND VOID THE FACTORY WARRANTY

Battery CoverKey

AA AlkalineBatteries

Deadbolt

Strike Plate

InsideMounting PlateInside Lock

Battery Cover

000XXXXXXX0000000

P/N -540-INST-FUL Rev 4AYRD2

1"[25mm]

Dia.

CL FO

LD

OV

ER

DO

OR

ED

GE

CL

CL

CL

CL1"[25mm]

Dia.

2-1/8"[54mm]

Thru HoleDia

2-1/8"[54mm]

Thru HoleDia

CAUTION:If printed from electronic

Measure ruler to check scalefile set print s 1:1cale to

2" 1" 0"

50mm 25mm

0"

25m

m50

mm

75m

m

2"3"

1"

CU

T L

INE

For 1-3/8"[35mm]

Thick Door 2-3/8" [60mm] Backset

2-3/4" [70mm] BacksetFor 1-3/4"[44.5mm]

Thick Door

Template

Tools Needed

Utility Knife

Drill Wood MortiseChisel

PencilTape

Measure

Level

Provided Fasteners

StandardPhillips HeadScrewdriver

OR ORSilver

for2 to 2-1/4"

Door Thickness

BlackforStandard

1-3/4"Door Thickness

Greenfor

1-3/8"Door Thickness

Strike Plateand

Latch Screws

Inside LockScrewsTools necessary only for new doors

or adjusting existing prep.

OptionalSecurity

Strike PlateScrews

Before you begin, open door and remove your existing deadbolt.

Before you begin, double check your door prep measurements.

EXISTING

2-3/8" or 2-3/4"(60mm or 70mm)

Backset

2-1/8" (54mm)Diameter

EXISTING

SeeDoor PrepTemplate

5-1/2" (140mm) StandardCheck clearance withlower hardware if thisdimension is less than

5-1/2" (140mm).

1" (25mm)Deep

!

Drill holes 1/2 waythrough door then

complete from other sideto prevent splitting.

2-1/8"(54mm)

Dia.

2-3/8" (60mm)or

2-3/4" (70mm)Backset

1"(25mm)

Dia.

FrameSee

Door PrepTemplate

Insideof Door

Frame

Necessary only for new doors or adjusting existing prep.Before you begin, prepare door & frame.

P/N -540-INST-FUL Rev 4AYRD3

P/N -540-INST-FUL Rev 4AYRD4

2-3/8" (60mm) Position

UP

2-3/4" (70mm)Position

x2

Installing Deadbolt1

OR

Press

Pull

UP

Bolt must be in retracted(unlocked) position.

Mechanism will be horizontal.Note UP arrow on deadbolt.

!

Mechanism(Horizontal Orientation)

*Backset

2-3/8" (60mm)Backset

2-3/4" (70mm)Backset

*2-3/8" (60mm) or 2-3/4" (70mm)

Installing Strike Plate2Frame

x2

x2

Choosestandard

strike platescrews orsecurityscrews.

!

P/N -540-INST-FUL Rev 4AYRD5

Installing Keypad

Outside of DoorInside of Door

3

Bolt must be in retracted(unlocked) position. Notehorizontal orientation of

mechanism.

!

Installing Interior Mounting Plate

Choosethrough boltappropriate

for your doorthickness.

See Page 3.

x2

!

4

Inside of Door

Make sureplate and

keypad arelevel beforetighteningthroughbolts.

!

P/N -540-INST-FUL Rev 4AYRD6

Removing Battery Cover5

000XXXXXXX0000000

Attaching the Cable6Make sure toconnect cable

with black markside up.

!

Secure cablein hooks.

!

P/N -540-INST-FUL Rev 4AYRD7

Installing Inside Lock7

x2Make sure

bolt isretracted.

!000XXXXXXX0000000

Make sure inside lock is properly seatedonto bottom of mounting plate and

excess cable is tucked into lock cavity.!

Testing Operation8

Close door andcheck boltoperation.

Bolt should rotate freely and easily.Go back to step 3 to recheck

installation if there is resistance.

000XXXXXXX0000000

P/N -540-INST-FUL Rev 4AYRD8

Installing Cover10

Congratulations, you've installed the Nest x Yale Lock!

000XXXXXXX0000000

Programming Instructions

Touch Yale logo to wake lock.You will be guided to set up the Master Passcode by following the audioinstructions on the lock. Once installation is complete, download the Nest App toadd the lock to your Nest account.

Additional passcodes and further programming can be done in the Nest app. Notethat the Master Passcode may also need to be set within the app. Once the Nest xYale Lock is paired with the Nest app, 20 passcodes will be available for use.

For written programming/troubleshooting instructions and instructions in otherlanguages, visit www.ShopYaleHome.com/NestYaleLock/Info

Failsafe 9 voltBattery Connection(Use Alkaline battery)

Product Support Tel: 1-855-213-5841 • www.yalehome.comYale Locks & Hardware is a division of Yale Security Inc., an ASSA ABLOY Group company.

ASSA ABLOY is the global leader in door opening solutions,dedicated to satisfying end-user needs for security, safety and convenience.

Yale® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group Company. Nest is a trademark of Nest Labs, Inc.© Copyright 2018, Yale Security Inc., an ASSA ABLOY Group Company. All rights reserved.

Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.Certified ANSI/BHMA A156.36 Grade 2 | Nest Labs Designed in the US nest.com Built in China | Patent & TM: nest.com/legal/ip-and-other-notices | Open source: nest.com/legal/compliance

Installing Batteries/Handing the Lock9“Hi from

Yale and Nest.”

Door must be closedprior to inserting

batteries.

Lock automaticallycalibrates itself foruse after battery

installation.

000XXXXXXX0000000