neo expanse tiles · neo expanse 600x1200 mm follow us on: brilloca limited registered o ice: 2,...
TRANSCRIPT
NEO EXPANSE600X1200 MM
www.neomti les .com
Follow us on:
Brilloca LimitedRegistered O�ice: 2, Red Cross Place, Kolkata-700001, West Bengal, India. Tel. +91 33 22487407 / 5668Corporate O�ice: 301-302, 3rd Floor, Park Centra, Sector-30, NH-8, Gurugram - 122001, Haryana, India. Tel. +91 124 477 9200
Email: [email protected] Free: 1800 103 7577
Welcome to new beginnings. Your home is a vast canvas upon which you
can express your individuality. It is a celebration of your tastes and
experiences. It is also a reflection of your aspirations and achievements.
Your spaces mirror the stories you want to tell.
Explore our stunning range of Neo Expanse - Glazed Vitirified Tiles that
enhance your architecture with fewer design interruptions.
DELTA CANYON
SHELLONYX
NEOM is a neo-modern range of tiles that o�ers
inspiring new designs, finishes and innovations.
It brings you unique, trendsetting ideas inspired by the
amazing beauty that’s all around us. Experience the
beautiful world of NEOM come alive in these pages.
NEW BEGINNINGS.INSPIRED BY BEAUTIFUL THINGS.
GVT- 600 X 1200 mm
- Décor & Base Concepts- Dazzle
- High Gloss- Gloss- Matt
PRODUCTS
FINISHES
INDEX Décor & Base Concepts
Dazzle
High Gloss
Gloss
Matt
Technical- Specification and Packing details
08
32
40
44
56
66
600 X 1200 MM
DÉCOR & BASE Concepts
DÉCOR & BASE Concepts
JAZZY CRÈME
10 / 11
Faces - 2
Lust
er
Gra
nu
el
JAZZY CRÈME DÉCOR
WAVY WHITE Faces - 4 WAVY WHITE DÉCOR
Lust
er
Gra
nu
el
DÉCOR & BASE Concepts 12
0
60
9 mmSTAIRS & SMALL AREAS
BATHROOMINTERIOR VENTILATED FACADE
Neo Expanse- 600 X 1200 mm
SORRA Faces - 2 SORRA DÉCOR
SYMMETRY GREY Faces - 4 SYMMETRY GREY DÉCOR
Lust
er
Gra
nu
el
Lust
er
Gra
nu
el
12 / 13
120
60
9 mmSTAIRS & SMALL AREAS
BATHROOMINTERIOR VENTILATED FACADE
DÉCOR & BASE Concepts
Neo Expanse- 600 X 1200 mm
PORCELAIN WHITE Faces - 4 PORCELAIN WHITE DÉCOR
DESERT MIST Faces - 4 DESERT DÉCOR
Lust
er
Gra
nu
el
Lust
er
Gra
nu
el
14 / 15
120
60
9 mmSTAIRS & SMALL AREAS
BATHROOMINTERIOR VENTILATED FACADE
DÉCOR & BASE Concepts
Neo Expanse- 600 X 1200 mm
UNITONE BEIGE Faces - 4 UNITONE BEIGE DÉCOR
VANILLA BEIGE Faces - 4 VANILLA DÉCOR
Lust
er
Gra
nu
el
Lust
er
Gra
nu
el
16 / 17
120
60
9 mmSTAIRS & SMALL AREAS
BATHROOMINTERIOR VENTILATED FACADE
DÉCOR & BASE Concepts
Neo Expanse- 600 X 1200 mm
JAMAICA GREY Faces - 4 JAMAICA GREY DÉCOR
CARAMEL DÉCOR
Gra
nu
el
Lust
er
Gra
nu
el
18 / 19
120
60
9 mmSTAIRS & SMALL AREAS
BATHROOMINTERIOR VENTILATED FACADE
DÉCOR & BASE Concepts
Neo Expanse- 600 X 1200 mm
GLAZED VITRIFIED TILES
ETHINIC BROWN Faces - 4 ETHINIC DÉCOR
GEOMETRY ART GREY Faces - 4 GEOMETRY ART DÉCOR
Lust
er
Gra
nu
el
Lust
er
Gra
nu
el
20 / 21
120
60
9 mmSTAIRS & SMALL AREAS
BATHROOMINTERIOR VENTILATED FACADE
DÉCOR & BASE Concepts
Neo Expanse- 600 X 1200 mm
GLAZED VITRIFIED TILES
SATIN WHITE Faces - 4 SATIN WHITE DÉCOR
RUSTICO ART CREAMA Faces - 3 Faces - 3RUSTICO ART DÉCOR
BRONZE ART
Lust
er
Gra
nu
el
Lust
er
Gra
nu
elG
ran
uel
22 / 23
120
60
9 mmSTAIRS & SMALL AREAS
BATHROOMINTERIOR VENTILATED FACADE
DÉCOR & BASE Concepts
Neo Expanse- 600 X 1200 mm
AURORA BEIGE Faces - 4 AURORA DÉCOR
VICTORIAN BEIGE Faces - 4 VICTORIAN BEIGE DECOE
ILLUSION GREY Faces -4 ILLUSION GREY DÉCOR
120
60
9 mmSTAIRS & SMALL AREAS
BATHROOMINTERIOR VENTILATED FACADE
Lust
er
Gra
nu
el
Lust
er
Gra
nu
el
Lust
er
Gra
nu
el
DÉCOR & BASE Concepts
24 / 25
Neo Expanse- 600 X 1200 mm
RHYTHMIC GREY Faces - 4 RHYTHMIC GREY DÉCOR
SELVA Faces - 3 SELVA DÉCOR
BLOCK GREY Faces -4 BLOCK DÉCOR
Lust
er
Gra
nu
el
Lust
er
Gra
nu
el
Lust
er
Gra
nu
el
120
60
9 mmSTAIRS & SMALL AREAS
BATHROOMINTERIOR VENTILATED FACADE
DÉCOR & BASE Concepts
26 / 27
Neo Expanse- 600 X 1200 mm
SPIRAL ART GREY Faces - 4 SPIRAL ART DÉCOR
MAZE ART GREY Faces - 3 MAZE ART DÉCOR
AIRBRUSH CREMA Faces -4 AIRBRUSH DÉCOR
Lust
er
Gra
nu
el
Lust
er
Gra
nu
el
Mat
t
Gra
nu
el
120
60
9 mmSTAIRS & SMALL AREAS
BATHROOMINTERIOR VENTILATED FACADE
DÉCOR & BASE Concepts
28 / 29
Neo Expanse- 600 X 1200 mm
MANDALA ART DÉCORMANDALA ART BEIGE Faces -4
Lust
er
Gra
nu
elDESIRE GREY Faces - 3 Faces - 4DESIRE DÉCOR
DRMATIC BEIGE Faces -2 DRMATIC BEIGE DÉCOR LEAF ART
IMPRESSION ART DÉCORIMPRESSION ART GREY Faces - 2
AUTUMN CREMA Faces - 4 RANDOM ART
Mat
t
Gra
nu
el
Lust
er
Gra
nu
elG
ran
uel
Lust
er
Gra
nu
el
Lust
er
Gra
nu
el
120
60
9 mmSTAIRS & SMALL AREAS
BATHROOMINTERIOR VENTILATED FACADE
DÉCOR & BASE Concepts
30 / 31
Neo Expanse- 600 X 1200 mm
600 X 1200 MM
Dazzle
Dazzle
BOLD WHITE Faces - 2 Faces - 3CRACKED ICE
IZMIR OLIVE Faces - 5 Faces - 5CHARCOAL COFFEE
120
60
9 mmSTAIRS & SMALL AREAS
BATHROOMINTERIOR VENTILATED FACADE
Dazzle
34 / 35
Neo Expanse- 600 X 1200 mm
SPRAY GREY GLACIER WHITE
ECSTASY WHITE WINTER WIND
DAWN TAN Faces -3
Faces -3
Faces -3
Faces -6
Faces -3
Faces -4
SMOOTH GREY
120
60
9 mmSTAIRS & SMALL AREAS
BATHROOMINTERIOR VENTILATED FACADE
Dazzle
36 / 37
Neo Expanse- 600 X 1200 mm
Faces - 3
Faces - 3
Faces - 3
Faces - 3
RHYTHMIC OLIVE
ZED BLACK
HARDROCK BEIGE
CALM DESERT
JAVA BROWN Faces -3 Faces -3SILENT GREY
MAPLE WOOD Faces - 3 Faces - 3TULIP WOOD
TEAK WOOD Faces - 3
120
60
9 mmSTAIRS & SMALL AREAS
BATHROOMINTERIOR VENTILATED FACADE
Dazzle
38 / 39
Neo Expanse- 600 X 1200 mm
600 X 1200 MM
HighGloss
High Gloss
WINTER WHITE ARCTIC NIGHT
COCOA BROWN Faces - 3 Faces - 3
Faces - 3
Faces - 4
NOIR GREY
PANDA WHITE Faces - 4 SUPREME BROWN
CHOCOLATE BROWN Faces -3 SPACE BLACK
High Gloss
42 / 43
Neo Expanse- 600 X 1200 mm 12
0
60
9 mmSTAIRS & SMALL AREAS
SELVES & NICHEBATHROOMINTERIOR
600 X 1200 MM
Gloss
Gloss
TRENDY WHITE DÉCOR Faces - 4 TRENDY WHITE
KARPIT CREAM DÉCOR Faces - 2 KARPIT CREAM
FORMIDABLE GREY Faces -4 MOUNTAIN GREY
120
60
9 mmSTAIRS & SMALL AREAS
SELVES & NICHEBATHROOMINTERIOR
Gloss
46 / 47
Neo Expanse- 600 X 1200 mm
MARINE BLUE Faces - 2 SPIRITUAL BEIGE
ASTERIO BLUE Faces - 4 ASTERIO BROWN
120
60
9 mmSTAIRS & SMALL AREAS
SELVES & NICHEBATHROOMINTERIOR
Gloss
48 / 49
Neo Expanse- 600 X 1200 mm
ICY BROWN Faces - 4
LUCID GREY
FAIRYTALE WHITE Faces - 4 Faces - 6SNOW WHITE
STATUARIO CLASSICO Faces - 4STROKES CRÈME
WINTER GREY Faces -8 Faces -8MONSOON GREY
EARTHY BROWN Faces - 2 Faces - 2SHY BEIGE
LUCID DARK GREY
ICY GREY Faces -3
120
60
9 mmSTAIRS & SMALL AREAS
SELVES & NICHEBATHROOMINTERIOR
Gloss
50 / 51
Neo Expanse- 600 X 1200 mm
Faces - 4PEARL GREY
SWEDISH CRÈME Faces - 3 Faces - 3BRAZILIAN TAN
Faces - 3SUNDERBAN BEIGE
MEDITATIVE CRÈME Faces -2 Faces -4ROMANTIC BEIGE
BOT TOCHINO CREME BRESCIA NATURAL
TESSERA GREY CANUS GREY
ARMANO GOLD MARCELLUS BEIGE
120
60
9 mmSTAIRS & SMALL AREAS
SELVES & NICHEBATHROOMINTERIOR
Gloss
52 / 53
Neo Expanse- 600 X 1200 mm
POLARO CRÈME
MOONDUST CREME BRESCIA BEIGE
ARMANO BEIGE ARMANO BROWN
ARMANO GREY TRAVERTINO BEIGE
BRESCIA ROYALERIO GOLD
120
60
9 mmSTAIRS & SMALL AREAS
SELVES & NICHEBATHROOMINTERIOR
Gloss
54 / 55
Neo Expanse- 600 X 1200 mm
600 X 1200 MM
Matt
Matt
MISTY WHITE MISTY BLUE
DEEP BLACK SAHARA DAWN
COCONUT BROWN Faces -3MEXICAN LANDSCAPE
120
60
9 mmSTAIRS & SMALL AREAS
BATHROOMINTERIOR VENTILATED FACADE
Matt
58 / 59
Neo Expanse- 600 X 1200 mm
NIGHTSKY BLUE CLOUD GREY
MERCURY GREY SAND BROWN
HEALING CRÈME Faces -2
Faces -2
Faces -4
Faces -4
Faces -4
Faces -4
ROCK BROWN
60 / 61
120
60
9 mmSTAIRS & SMALL AREAS
BATHROOMINTERIOR VENTILATED FACADE
Matt Neo Expanse- 600 X 1200 mm
Faces - 6ASHSTONE LIGHT
LOCORUST BROWN
ASHSTONE DARK
Faces - 4LOCORUST BEIGE
LOCORUST WHITE Faces -8 Faces -8LOCORUST GREY SALTY CRÈME Faces - 2
SANDSTONE CREAM Faces - 2 Faces - 2SANDSTONE GREY
OYESTER BEIGE Faces - 2 OYESTER BROWN
CARAVAN GOLD Faces -3
62 / 63
120
60
9 mmSTAIRS & SMALL AREAS
BATHROOMINTERIOR VENTILATED FACADE
Matt Neo Expanse- 600 X 1200 mm
OAKWOOD
PICASSO DÉCOR
MONDRIAN DÉCOR
Faces -2
Faces -4
Faces -4
64 / 65
120
60
9 mmSTAIRS & SMALL AREAS
BATHROOMINTERIOR VENTILATED FACADE
Matt Neo Expanse- 600 X 1200 mm
Tile is extremely heavy and may have sharp edges. It is, therefore, necessary to wear protective gloves at times when dealing with it. We recommend the use of single or double suction cups which will help in ensuring that the operator's safety is not compromised.
Carefully wipe the surface of the tile to remove any dust or moisture, position the suction cups on the face of the tile and make sure that they adhere to the surface properly.
SAFE HANDLING:
For safe handling of Tiles on-site we highly recommend the use of a specialist tile handling frame for larger formats, the full-frame with four suction cups is suitable, with smaller formats two double suction cups are su�icient.
CUTTING:
Tile requires high-quality diamond blades for cutting; (if hiring cutting equipment, please ensure this is provided with the wet diamond tools and take appropriate measures to provide e�icient ventilation in the work area. Always wear approved eye, boot & hand protection when fabricating porcelain.
LINEAR CUTS:
For most cuts, we recommend the use of a wet saw machine. These are available for cutting lengths of 100 mm to 2200 mm. The Raimondi Bolt range of bridge wet saw machines are available in various lengths. For linear cuts of 1500-3000 mm, we recommend the use of a cutting guide with cutting carriage. Always use a handling frame with suction cups where necessary. The Raimondi FREE-CUT Cutting System is available for lengths up to 4000 mm.
TRANSPORTATION INSTRUCTIONS
HAND CUTTING SYSTEM
Mark the portion to be removed at the ends of the tile with a pencil. Position the cutting guide with cutting carriage so that the references on the guide coincide with the lines marked on the panel.
Lock the cutting guide with the cutting carriage in place using the suction cups. To guaranty correct scoring, the pressure and movement of the cutting carriage must be constant along the whole length of the cut. Score one end of the panel by 15cm pushing the cutting carriage towards the edge of the panel. Complete the scoring up to the opposite end of the panel.
Using the cutting guide, move the panel until scoring line protrudes 5-10cm from work surface. Release the cutting guide from suction cups and move towards the middle of the panel. Start the cutting-o� process by positioning cutting-o� pliers in line with the line scored on the panel. Exert progressive pressure until you notice that cutting-o� process has begun. Go to the opposite end and position cutting-o� pliers in line with a line scored on the panel. Exert progressive pressure until you notice the cutting-o� process has begun. To complete the cutting-o� process, one or more operators must grip the portion to be removed and exert progressive pressure. Sharp and rough edges should be smoothed and finished with a diamond bu�er or sanding pad.
Use a bridge saw running to cut from one hole to the next. Ensure the bridge saw is running at minimum speed to decrease the stress on the slab.
Ensure that at least 5 mm space is left between the edge of the slab and the point where the hole has to be made. The radius of the corners must be a minimum of 3 mm.
Angles cut without necessary radius length create a stresspoint, whereas the large radius maintains the structural resistance. Make sure to never leave the corners with 90˚ angle cuts.
Use a drill bit smaller than 3 mm to drill corners of the cut-out.
CUTTING GUIDE WITH CUTTING CARRIAGE
CUTTING GUIDE WITH CUTTING CARRIAGE
1. Plaster the surface of the floor to be tiled smooth. Complete the plastering and curing at least two weeks prior to the tiling.
2. Before fixing NEOM tiles, lay them out in the desired pattern and make sure that they give an acceptable blend of colour. Please note that certain amount of shade variation is inherent in the manufacturing of a fully vitrified ceramic tile. The company will bear no liability after the tiles are fixed.
3. For best results while fixing NEOM tiles, we recommend the use of a tile fixing adhesive. Please follow the tile fixing instructions provided along with the adhesive.
4. Follow these instruction for fixing NEOM tiles using sand and cement: → Use cement and sand mortar in 1:4 ratio. Add water to create a consistent paste. → Do not further add any further water and apply the mixture within an hour after the mixing is complete. → Apply a 20-30 mm layer of bedding material over an area of 1 square meter at a time, on the surface of the area.
Apply a fine slurry to the back of the tile to ensure proper and full bedding. Press gently for even adherence at the back of the tile. Do not use iron hammer or some heavy material to press the tile.
5. For fixing NEOM tiles on Dado (Wall), we recommend the use of adhesive. Please follow the manufacturer’s instructions for the same. We do not recommend the use of sand and cement for fixing on Dado (Wall).
6. Mark and layout the tiles from the center of the area to be tiled so that cut tiles, if any, will be on the outer edges towards the walls.
7. Complete the tile laying process by pressing the center of the NEOM tiles. This ensures the tiles firmly fit into place, along the walls/floors.
8. We advise you to maintain a mininum grouting space of 3 mm between the tiles along the expansion joints.9. Allow 3-4 days for bed curing. After this period fill the joints with grouts.10. Fifteen minutes after finishing the grouting process, wipe o� the excess grout with a damp sponge and polish the
tiles with a soft and dry cloth for a clean surface. The tiles can also be cleaned by mild acid (however, Hydrofluoric Acid and its derivatives should not be used).
11. The company does not accept any liability in case of problems arising out of non-adherence of these fixing instructions.
12. We advise you to please check the codes of design, shades and grade of tiles prior to installation as the company shall not be responsible once the tiles have been laid.
Nothing in these instructions is a substitute for good workmanship & supervision.
*Images of tiles showcased may vary in colour and texture from the actual product.
TILES LAYING INSTRUCTIONS:
66 / 67
CLEANING AND MAINTENANCE
INTRODUCTION:
Neom tiles are easy to clean and maintain. Regular cleaning andmaintenance of the tile accentuates the aesthetics and gives the surface an appealing shine.
INITIAL CLEANING:
It is to be noted that the initial cleaning done after laying the floor is extremely important. The initial cleaning helps in removing any residue of mortar, adhesives and epoxy that may be left in the joints. We recommend using an acid-based detergent in 1:5 ratio with water. Rub this solution on the surface energetically to clean the surface properly. Next, it is equally important to rinse the surface thoroughly with water to remove traces of the detergent used.
MAINTENANCE AND CARE:
NEOM tiles are manufactured under high firing temperature and the use of high-quality raw materials makes it waterproof. Minimum absorption rate doesn’t allow dirt to penetrate the surface, but it is necessary to clean it from the surface. We do not recommend using detergentscontaining waxes for cleaning the surface, as it may form an unwanted greasy layer on the surface. The appropriate choice of detergent has been mentioned in the following points. Especially after theinstallation of polished surfaces, we recommend covering the surface with particle board or any other suitable material to protect it from dirt and on-site processing.
GENERAL RECOMMENDATIONS:
For the Tiles laid in heavy footfall areas like airports, shopping malls and public spaces, we recommend using automatic cleaning machines with suction. These machines ensure deep cleaning of the surface while removing liquids that may cause soiling and subsequently prevents the formation of any unwanted layers on the surface. Any readily available detergent can be used to clean the tiles, except Hydrofluoric acid or its compounds. Always keep the concentration of thedetergent as low as possible to speed up the maintenance process and keep the costs in check.We recommend using large-sized, bright or polished surfaces for raised floors. These surfaces can be easily dry cleaned or it requires fewer amounts of liquids. Once, the floor has been laid, it is essential to clean it properly with the necessary products.
TECHNICAL SPECIFICATIONS
PROPERTIES NEOM VALUETEST METHOD
DIMENSION & SURFACE QUALITY
IS 13630 Part-1
IS 13630 Part-1
IS 13630 Part-1
IS 13630 Part-1
IS 13630 Part-1
IS 13630 Part-1
IS 13630 Part-2
IS 13630 Part-6
IS 13630 Part-6
IS 13630 Part-11
IS 13630 Part-13
IS 13630 Part-2
IS 13630 Part-3
IS 13630 Part-14
IS 13630 Part-9
IS 13630 Part-5
IS 13630 Part-10
IS 13630 Part-4
IS 13630 Part-8
IS 13630 Part-8
± 0.10%
± 4.0%
± 0.10%
± 0.10%
± 0.15%
Avg.≤ 0.06 %
Avg. 38 N/mm2
Thickness< 7.5mm-700 N Thickness 7.5mm-1500N
Min. Class II
Resistance
Min. 2.2
0.02 mm/m
0.55 Min
4 [email protected] Bar Min.
10 Cycle Min.
No damage
6X10¯6 K ¯1 Max.
Min. AA
Resistance
IS 15622:2017GROUP - B I A
± 0.10%
± 5.0%
± 0.10%
± 0.10%
± 0.50%
Avg.≤ 0.08 %, Ind-0.1 %
Avg. 35 N/mm2, Ind.-32 N/mm2
Thickness< 7.5mm-700N Thickness≥ 7.5mm-1300N
Min. Class II
Min. 5
Min. 2.2
0.02mm/m
0.55 Min.
4 [email protected] Bar Min.
10 Cycle Min.
Resistant
6X10¯6 K ¯1 Max.
Min. AA
Min. Class 1
Min. of 95 % of tiles shall be freefrom visible surface defects
Min. of 95 % of tiles shall befree from visible surface defects
Deviation in Length and Width (%)
Deviation in Thickness (%)
Straightness of Sides (%)
Diagonal Variation or Rectangularity (%)
Surface Flatness (%)
Surface Quality (%)
Water Absorption
MOR-Modulus of Rupture
Breaking strength
Abrasion Resistance (PEI groups II III IV V )
MOH's Scratch Hardness
Bulk Density
Moisture Expansion
Impact Resistance (COR)
Crazing Resistance
Thermal Shock Resistance
Frost Resistance
Linear Thermal Expansion
Resistance to Household Chemical
Resistance to Stain
CHEMICAL PROPERTIES
PHYSICAL PROPERTIES
We recommend the use of a mask while cutting tiles We recommend the use of gloves while laying tiles
600x1200
PACKING DETAILS
BOX
Tiles/Box Coverage/Box(Sq.-Ft.) Coverage/Box(Sq-Mtrs.) Approx Box Weight In Kg.DIMENSION (MM)
2 15.50 1.44 30
68 / 69
NEO EXPANSE600X1200 MM
www.neomti les .com
Follow us on:
Brilloca LimitedRegistered O�ice: 2, Red Cross Place, Kolkata-700001, West Bengal, India. Tel. +91 33 22487407 / 5668Corporate O�ice: 301-302, 3rd Floor, Park Centra, Sector-30, NH-8, Gurugram - 122001, Haryana, India. Tel. +91 124 477 9200
Email: [email protected] Free: 1800 103 7577