nederman catalog

2007 / 2008

Product Catalogue Produktkatalog

Каталог продукции компании Catalogue des produits

Termékkatalógus Catalog de produse

Katalog výrobků Catálogo de productos

Katalog produktów Catálogo de Produtos

Productcatalogus

www.nederman.com

Let Nederman improve your workplaceNederman, founded in 1944, is the leading supplier of products and systems for extracting dust, smoke and exhaust fumes. We cover the whole spectrum of vacuum technologies – from high, through mid to low vacuum. Together with our range of supply systems for water, air, oil and other consumables, we make workspaces all around the world clean, safe and efficient. Investing in Nederman products and systems provides extensive benefits.

Clean, safe and sound Workspaces kept free from dust, hazardous particles, fumes and exhaust gases mean better working conditions, fewer health problems, improved productivity and reduced safety risks. At the same time, harmful emissions to the outdoor environment can be minimized.

More efficient and rational production By keeping floors free from hoses and cables, the risk of trip-ping accidents can be eliminated. Our systems for supplying air, water, power, oil and other media provide practical and easily accessible solutions for any type of workshop.

Assured quality of finished products Dirt and dust can affect both manufacturing quality and your company reputation. A clean production site reduces the risk of damage to components and of malfunctioning equipment, and safeguards the quality of finished products.

Reduced wear on tools and equipment Wear on tools, motors, bearings and other vital parts may cause malfunctions and sudden stops. By capturing harmful particles at source, their potentially damaging effects can be eliminated and the risk of disturbances minimized.

Retractable Hose and Cable ReelsHose Reels ....................................................................4-13 Cable Reels ......................................................................14Accessories for Hose Reels ..............................................15Hose Specifications ..........................................................16Accessories for Cable Reels .............................................17Balancers ..........................................................................17

Extraction ArmsGuides ..............................................................................18Extraction Arms, non explosive environment ...............19-23Extension Arm/Rail ......................................................24-25Extraction Arms, vehicle ..............................................26-27Extraction Arms, explosive environment ......................28-30Accessories ......................................................................31

Filter and Filter SystemsFume eliminator ................................................................33Modular Filter Systems ................................................34-35Mobile Filter Systems ..................................................36-39Stationary Filter Systems ..................................................40Oil mist Filter systems ..................................................42-43

FansN-series Fans ...................................................................44Portable Fans ...................................................................45Control equipment .......................................................46-48Accessories ......................................................................49

Bench Top Extraction SystemsGuide to Bench Top Extraction Arms & Kits .................50-51Bench Top Extraction arms ..........................................52-53Bench Top Extraction kits ............................................54-55Bench Top Filter units ..................................................56-59Accessories .................................................................60-61

High VacuumNederman Norclean Line ..................................................62 Portable High Vacuum units.........................................63-66Suction Blaster..................................................................67Pre-separator ....................................................................67Stationary High Vacuum systems - L Pak .........................68Dust Extraction Kits...........................................................69Accessories etc ...........................................................70-74

Systems for Exhaust Extraction Exhaust System for stationary vehicles.............................75Singe/Twin Exhaust Extractor ...........................................76Exhaust Hose Reels ....................................................77-78Exhaust Rail System .........................................................79Balancer and Emission kits ...............................................80Trackarm ..........................................................................81Exhaust Nozzles and Hoses ........................................82-84Accessories .................................................................85-86

Workplace Screening ................................................87-88On our website you find information about products, installation instructions, maintenance manuals, FAQs and lots of tips and hints.

www.nederman.com

We reserve the right to introduce changes in performance, dimensions and material in the course of technical progress. The figures are shown without obligation.

Complete product/Kits overview ....................................3

2 www.nederman.com

Quality With more than 60 years of experience we are pioneers renowned for excellent quality, certified according to ISO 9001 and ISO 14001. Modern production facilities and high-ly efficient distribution centre mean that we can maintain an exceptionally high delivery capacity.

The unbroken chain At Nederman we control the complete product chain: We develop, design, manufacture and test our products and can also offer installation, emergency service/repair, scheduled maintenance and other services. This means that you are always ensured safe and reliable products and your feedback will help us to design even more effective solutions.

Leading design solutions Our extensive product range is based on intensive product development and state-of-the-art design solutions with focus on user-friendliness and durability. Our modular design con-cept enables us to offer flexible and cost-effective products.

We are wherever you areOur products are distributed through a worldwide network of subsidiaries and agents in more than 50 countries. This gives us insights into the numerous national and international regulations and directives governing work safety, health and environmental issues. For further information, do not hesitate to contact your local representative.

Support with hands-on adviceOur consultation and support services include full CAD facilities. With the help of NEDQuote, our powerful design program, we can create solutions to meet your specific require-ments, including set-up scenarios for the working environment and cost calculations.

Services for optimum performanceOur global network of skilled engineers provide local on-site support. Service programs, including preventative maintenan-ce, can be tailor-made to your specific set-up of Nederman equipment.

Ex approved products Nederman takes a holistic approach to explosion risk situa-tions and can offer advanced solutions based on extensive know-how and highly reliable products designed to comply with European ATEX directives*. Our expert sales personnel are well acquainted with national and international require-ments for extraction applications in explosive environments and can recommend suitable equipment for each application.

*) ATEX stands for ATmosphere EXplosive. Directive 94/9/EC, also known as ATEX 95 or the ATEX Equipment Directive covers machinery, components and controls that work in explosive atmospheres. The directive requires the employers to do all in their power to prevent explosions and provide protection.

Directive 99/92/EC, also known as ATEX 137 or the ATEX Workplace Directive states that the employer must determine how often, and where, a potentially explosive atmosphere will be present. These areas should be zoned according to the relevant specifications. The employer must ensure only equipment of the correct category is used in a certain zone type.

3 www.nederman.com

Product Page

45

51

56-58

62-66

67

67

68

76-79

Product Page

4-14

19-21

27

33

35

36-37

38

40

42

Complete Units/KitsThis is the convenient and cost effective way to make workplaces clean, safe and efficient in no time. The complete kits contain everything you need. Specifications and part numbers: see separate product pages.

Reels With hoses or cables

Extraction ArmsWith hood fan, wall bracket and fan starter

Portable Fans For service and repair work

FilterMax C25Stationary filter unit with fan and control panel

NOM Oil Mist FiltersFor capture of coolant and oil mist

FilterBoxCompact filter unit with fan and arm.Mobile, wall mounted or floor mounted

FilterCart Mobile and compact extraction units with integrated arm, filter and fan

MFS Modular Filter SystemWith particle filter, extraction arm, fan, starter

Fume eliminatorPortable extraction units

Extraction Arm For windscreen repair. With fan, wallbracket, starter and windscreen hood

Single Exhaust Extractor For all types of stationary vehicles. Complete with fan

L-PAK Stationary High Vacuum unitIncluding bends, pipe couplers, compres-sed air filter and junction box, etc.

Portable Pre-separatorSeparates abrasive or larger objects, water and cutting fluids

Suction BlasterFor removal of corrosion, old paint, etc. from all kinds of surfaces

Portable High Vacuum UnitsAirpowered and electric for industrial cleaning and transportation

Bench Top Extraction Kits For smaller workplaces

Filter and Fan units For Bench Top applications

Most products are available for instant delivery from the Nederman Distribution Centre. For delivery terms of customized and non-standard products, please contact us for specific information.

� www.nederman.com

Product availability may differ by country

Ideal for professional tradesmen, industrial applications and “do-it-yourself “ workshops. Equally suitable for pneumatic tools, staplers and blow guns. Weight incl. hose: 3.5 – 5.0 kg. Material recycling: 100 %

Nederman Hose Reel Series 882

Delivered complete with pivoting bracket.Long outlet slot provides an optimum pull-out angle for the hose.Recoil mechanism spring is housed in an easy-to-replace cas-sette.

••

•

A fully encased and robust, medium sized hose reel. Highly suitable for applications in vehicle repair and maintenance workshops. Weight incl. hose: 14 – 16 kg. Material recycling: 100 %

Nederman Hose Reel Series 883

Spring tension easily adjustable from the outside.Fast and easy to service.Simple hose replacement without dismantling the reel.

•••

N.B. This hose reel is supplied without an inlet connection hose. A 10 mm (3/8”) internal diameter hose should be used.

* Connection hose = 1 m long

Reel with hose

Reel without hose

Accessories: see end of chapter

Use for Max. working pressure, MPa (psi) Hose int. Ø, mm (in) Hose length, m Hose material Hose type (see end of chapter) Part no.

Air 1.0 (1�5) 6 (1/�) 12 PVC / PUR A 30806�82

Air 1.0 (1�5) 8 (5/16) 8 PVC / PUR A 30806682

Air 1.0 (1�5) 10 (3/8) 6 PVC / PUR A 30806882

Use for Max. working pressure, MPa (psi)

Distribution hose int. Ø, mm (in)

Distribution hose length, m

Connection hose* int. Ø, mm (in)

Hose material Hose type (see end of chapter)

Part no.

Air / Water 1.5 (220) 10 (3/8) 15 12.5 (1/2) Rubber B 30800883

Air / Water 1.5 (220) 12.5 (1/2) 10 12.5 (1/2) Rubber B 30801083

HP water 25 (3625) 10 (3/8) 13 10 (3/8) Rubber G 30802283

Oil 7.5 (1090) 12.5 (1/2) 10 12.5 (1/2) Rubber I 30801283

Grease 35 (5075) 6 (1/�) 15 6 (1/�) Rubber J 30801883


For distribution hose int. Ø, mm (in)

For distribution hose length, m

For connection hose int. Ø, mm (in)

Hose connections on reel (see end of chapter)

Part no.

Air / Water 1.5 (220) 10 (3/8) 15 12.5 (1/2) B 30800783

Air / Water 1.5 (220) 12.5 (1/2) 10 12.5 (1/2) B 30800983

HP water 25 (3625) 10 (3/8) 13 10 (3/8) G 30802183

Oil 7.5 (1090) 12.5 (1/2) 10 12.5 (1/2) I 30801183

Grease 35 (5075) 6 (1/�) 15 6 (1/�) J 30801383

5 www.nederman.com


Nederman Hose Reel Series 888/889A reliable, medium sized hose reel for safe and maintenancefree operation. Weight incl. hose: 11 – 16 kg. Material recycling: 100 %

Outlet slot position can be adjusted through 120° for optimal pull-out angle.Spring tension is easily adjusted.Latch function is easily disengaged.

•

••


Reel with hose

Reel without hose







Part no.





Water – food grade hose

1.5 (220) 12.5 (1/2) 10 12.5 (1/2) Rubber E 30801088


1.5 (220) 12.5 (1/2) 13+2 12.5 (1/2) Rubber E 30801089

HP water 25 (3625) 10 (3/8) 15 10 (3/8) Rubber G 30801888

HP water 25 (3625) 10 (3/8) 18 10 (3/8) Rubber G 30801889

Oil 7.5 (1090) 12.5 (1/2) 10 12.5 (1/2) Rubber I 30801688

Oil 7.5 (1090) 12.5 (1/2) 15 12.5 (1/2) Rubber I 30801689

Grease 35 (5075) 6 (1/�) 15 6 (1/�) Rubber J 30802688






Part no.

Air / Water 1.5 (220) 10 (3/8) 15 12.5 (1/2) B 30800388

Air / Water 1.5 (220) 10 (3/8) 20 12.5 (1/2) B 30800589

Air / Water 1.5 (220) 12.5 (1/2) 10 12.5 (1/2) B 30800788

Air / Water 1.5 (220) 12.5 (1/2) 15 12.5 (1/2) B 30800789

HP water 25 (3625) 10 (3/8) 15 10 (3/8) G 30801788

HP water 25 (3625) 10 (3/8) 18 10 (3/8) G 30801789

Oil 7.5 (1090) 12.5 (1/2) 10 12.5 (1/2) I 30801588

Oil 7.5 (1090) 12.5 (1/2) 15 12.5 (1/2) I 30801589

Grease 35 (5075) 6 (1/�) 15 6 (1/�) J 30802588

6 www.nederman.com


Nederman Hose Reel Series 893A medium sized hose reel with open design. Versatile and easy to mount in industrial and workshop environments. Weight incl. hose: 13 – 16 kg. Material recycling: 100 %.

Open design for easy cleaning and servicing.Unique stand design offers mounting flexibility.

••


Reel with hose

Reel without hose







Part no.




1.5 (220) 12.5 (1/2) 10 12.5 (1/2) Rubber E 30801093

HP water 25 (3625) 10 (3/8) 15 10 (3/8) Rubber G 30801893

Oil 7.5 (1090) 12.5 (1/2) 10 12.5 (1/2) Rubber I 30801693

Grease 35 (5075) 6 (1/�) 15 6 (1/�) Rubber J 30802693






Part no.

Air / Water 1.5 (220) 10 (3/8) 15 12.5 (1/2) B 30800393

Air / Water 1.5 (220) 12.5 (1/2) 10 12.5 (1/2) B 30800793

HP water 25 (3625) 10 (3/8) 15 10 (3/8) G 30801793

Oil 7.5 (1090) 12.5 (1/2) 10 12.5 (1/2) I 30801593

Grease 35 (5075) 6 (1/�) 15 6 (1/�) J 30802593

7 www.nederman.com


Nederman Hose Reel Series 884Heavy duty hose reel for long and heavy hoses. Made of epoxy coated die-cast aluminium. Ball bearings in drum and swivel. Fully protected inner mechanisms. Weight incl. hose: 28 – 35 kg. Material recycling: 100 %

Strong, durable and highly corrosion resistant.Smooth hose operation.Adjustable outlet arm minimizes friction.

•••


Reel with hose

Reel without hose







Part no.

Air / Water 1.5 (220) 12.5 (1/2) 20 12.5 (1/2) Rubber D 3081028�

Air / Water 1.5 (220) 12.5 (1/2) 30 12.5 (1/2) Rubber D 30817�8�

Air / Water 1.5 (220) 19 (3/�) 15 19 (3/�) Rubber D 30810�8�

Air / Water 1.5 (220) 25 (1) 10 25 (1) Rubber D 3081068�


1.5 (220) 12.5 (1/2) 20 12.5 (1/2) Rubber E 3081088�


1.5 (220) 19 (3/�) 15 19 (3/�) Rubber E 3081128�


1.5 (220) 25 (1) 10 25 (1) Rubber E 30811�8�

HP water 25 (3625) 10 (3/8) 25 10 (3/8) Rubber G 3081168�

Oil 7.5 (1090) 12.5 (1/2) 20 12.5 (1/2) Rubber I 3081188�

Oil 7.5 (1090) 12.5 (1/2) 30 12.5 (1/2) Rubber I 3081368�

Oil 5.0 (725) 19 (3/�) 15 19 (3/�) Rubber I 3081228�

Oil 5.0 (725) 25 (1) 10 25 (1) Rubber I 30813�8�

Grease 35 (5075) 6 (1/�) 25 6 (1/�) Rubber J 3081328�






Part no.

Air / Water 1.5 (220) 12.5 (1/2) 20 12.5 (1/2) D 3081018�

Air / Water 1.5 (220) 12.5 (1/2) 30 12.5 (1/2) D 3081738�

Air / Water 1.5 (220) 19 (3/�) 15 19 (3/�) D 3081038�

Air / Water 1.5 (220) 25 (1) 10 25 (1) D 3081058�


1.5 (220) 19 (3/�) 15 19 (3/�) E 3081218�


1.5 (220) 25 (1) 10 25 (1) E 3081338�

HP water 25 (3625) 10 (3/8) 25 10 (3/8) G 3081158�

Oil 7.5 (1090) 12.5 (1/2) 20 12.5 (1/2) I 3081178�

Oil 7.5 (1090) 12.5 (1/2) 30 12.5 (1/2) I 3081358�

Oil 5.0 (725) 19 (3/�) 15 19 (3/�) I 3081218�

Oil 5.0 (725) 25 (1) 10 25 (1) I 3081338�

Diesel 5.0 (725) 19 (3/�) 15 19 (3/�) I 3081�58�

8 www.nederman.com


Nederman Hose Reel Series 876The ultimate reel for twin hoses, designed to handle oxygen/ acetylene or oxygen/LPG supplies. This is an application where safety cannot be stressed enough. Weight incl. hose: 26 – 30 kg. Material recycling: 100 %

Single-layer hose feed and storage.Open design for safety and easy servicing.All-steel construction.

•••

* Connection hoses = 1 m long

Reel with hose

Reel without hose






Hose type (see end of chapter)

Part no.

Oxygen and Acetylene 2.0 (290) 2 x 6.3 (1/�) 20 2 x 6.3 (1/�) K 30828�76

Oxygen and Acetylene 2.0 (290) 1 x 6.3 (1/�) + 1 x 10 (3/8) 15 1 x 6.3 (1/�) + 1 x 10 (3/8) K 30827276

Oxygen and Acetylene 2.0 (290) 2 x 10 (3/8) 15 2 x 10 (3/8) K 30827�76

Oxygen and LPG 2.0 (290) 2 x 10 (3/8) 15 2 x 10 (3/8) K 30827676






Part no.

Oxygen and Acetylene 2.0 (290) 2 x 6.3 (1/�) 20 2 x 6.3 (1/�) K 30828376

Oxygen and Acetylene 2.0 (290) 1 x 6.3 (1/�) + 1 x 10 (3/8) 15 1 x 6.3 (1/�) + 1 x 10 (3/8)

K 30827176

Oxygen and Acetylene 2.0 (290) 2 x 10 (3/8) 15 2 x 10 (3/8) K 30827376

Oxygen and LPG 2.0 (290) 2 x 10 (3/8) 15 2 x 10 (3/8) K 30827576

9 www.nederman.com


Nederman Hose Reel Series 888/889 Anti-corrosionThe anti-corrosion hose reels have a stainless steel stand, brass hub and swivel, and drum of composite material. Weight incl. hose: 11 –16 kg. Material recycling: 100 %

Suitable for wash down applications indoors and outdoors.All components manufactured in highly corrosion resistant materials.Adjustable outlet minimizes friction.

••

•


Reel with hose

Reel without hose






Part no.

Water – food grade hose 1.5 (220) 12.5 (1/2) 10 12.5 (1/2) Rubber E 30803288

Water – food grade hose 1.5 (220) 12.5 (1/2) 13+2 12.5 (1/2) Rubber E 30802089

HP water 25 (3625) 10 (3/8) 15 10 (3/8) Rubber G 30803�88

HP water 25 (3625) 10 (3/8) 18 10 (3/8) Rubber G 30802289






Part no.

Water – food grade hose 1.5 (220) 12.5 (1/2) 10 12.5 (1/2) E 30803188

Water – food grade hose 1.5 (220) 12.5 (1/2) 13+2 12.5 (1/2) E 30801989

HP water 25 (3625) 10 (3/8) 15 10 (3/8) G 30803388

HP water 25 (3625) 10 (3/8) 18 10 (3/8) G 30802189

Nederman Hose Reel Series 893 Anti-corrosionThe anti-corrosion hose reels have a stainless steel stand, brass hub and swivel, and drum of composite material. Weight incl. hose: 11 –16 kg. Material recycling: 100 %

Suitable for wash down applications indoors and outdoors.All components manufactured in highly corrosion resistant materials.Adjustable outlet minimizes friction.

••

•


Reel without hoseUse for Max. working

pressure, MPa (psi)For distribution hose

int. Ø, mm (in)For distribution hose length, m



Part no.

Water - food grade hose 1.5 (220) 12.5 (1/2) 10 12.5 (1/2) E 30803993

HP water 25 (3625) 10 (3/8) 15 10 (3/8) G 3080�193





Hose material


Part no.

Water - food grade hose 1.5 (220) 12.5 (1/2) 10 12.5 (1/2) Rubber E 3080�093

HP water 25 (3625) 10 (3/8) 15 10 (3/8) Rubber G 3080�293


Reel with hose

10 www.nederman.com


Nederman Hose Reel Series 888/889 Stainless SteelSuitable for tough indoor and outdoor environments. Their very high corrosion resistance means that they can withstand expo-sure to high air humidity and to chemicals. Weight incl. hose: 14 – 18 kg. Material recycling: 100 %

All components manufactured in stainless steel.Open design facilitates cleaning.Adjustable outlet arm minimizes friction.

•••


Reel with hose

Reel without hose






Hose material


Part no.



HP water 25 (3625) 10 (3/8) 15 10 (3/8) Rubber G 30803888

HP water 25 (3625) 10 (3/8) 20 10 (3/8) Rubber G 30803889

Use for Max. working pres-sure, MPa (psi)





Part no.



HP water 25 (3625) 10 (3/8) 15 10 (3/8) G 30803788

HP water 25 (3625) 10 (3/8) 20 10 (3/8) G 30803789

Nederman Hose Reel Series 893 Stainless SteelSuitable for tough indoor and outdoor environments. Their very high corrosion resistance means that they can withstand expo-sure to high air humidity and to chemicals. Weight incl. hose: 14 – 18 kg. Material recycling: 100 %

All components manufactured in stainless steel.Open design facilitates cleaning.Adjustable outlet arm minimizes friction.

•••


Reel with hose

Reel without hose





Hose material


Part no.


HP water 25 (3625) 10 (3/8) 15 10 (3/8) Rubber G 30803�93






Part no.


HP water 25 (3625) 10 (3/8) 15 10 (3/8) G 30803393

11 www.nederman.com


Nederman Hose Reel Series 886 Stainless SteelThis hose reel, made entirely of stainless steel, is designed spe-cifically for the food processing industry. It is very easy to clean thanks to rounded edges and features an easy to dismantle hose outlet, an externally mounted swivel, and a minimum number of material joints. Weight incl. hose: 28 – 34 kg. Material recycling: 100 %

Reel without hose

Distribution hose with galvanized fittings

Distribution hose with stainless steel fittings

Connection hose with galvanized fittings

Connection hose with stainless steel fittings


Use for Max. working pressure, MPa (psi) For hose int. Ø, mm (in) For hose length, m Part no.

Water 1.5 (220) 19 (3/�) 18 30800186

Water 1.5 (220) 25 (1) 10 30802186

Water 10 (1�50) 12.5 (1/2) 25 30800386

HP water 25 (3625) 10 (3/8) 25 30801386

Use for Max. working pressure, MPa (psi) Hose type (see end of chapter) Int. Ø, mm (in) Hose length, m Part no.

Water – food grade hose 1.5 (220) E 12.5 (1/2) 25 30371898

Water – food grade hose 1.5 (220) E 19 (3/�) 18 30371897

Water – food grade hose 1.5 (220) E 25 (1) 10 30373663

HP water 25 (3625) G 10 (3/8) 25 30371900


Water – food grade hose 1.5 (220) E 12.5 (1/2) 1 30373670

Water – food grade hose 1.5 (220) E 19 (3/�) 1 3037367�

Water – food grade hose 1.5 (220) E 25 (1) 1 3037366�

HP water 25 (3625) G 10 (3/8) 1 303��852


Water - food grade hose 1.5 (220) F 12.5 (1/2) 25 30371951

Water – food grade hose 1.5 (220) F 19 (3/�) 18 30371950

Water – food grade hose 1.5 (220) F 25 (1) 10 30373665

HP water 25 (3625) H 10 (3/8) 25 30371953


Water - food grade hose 1.5 (220) F 12.5 (1/2) 1 30373671

Water – food grade hose 1.5 (220) F 19 (3/�) 1 30373675

Water – food grade hose 1.5 (220) F 25 (1) 1 30373666

HP water 25 (3625) H 10 (3/8) 1 30373669

Unique design makes easy cleaning.Up to 25 m hose capacity.Meets international hygienic requirements.

•••

12 www.nederman.com


Series 889 Ex is a medium sized hose reel for industrial use. All main components are made of stainless steel and conductive composite material. Approved for use in Ex zones 1, 2, 21 and 22 in accordance with ATEX 94/9/EC, Equipment group II, Category 2G D. Weight incl. hose: 18 kg. Material recycling: 100 %

Nederman Hose Reel Series 889 Ex approved

Series 886 Ex is a hose reel with large hose capacity for heavy duty industrial use. It is constructed for environments where high hygiene and corrosion resistance is required. All com-ponents are made of stainless steel and conductive composite material. Approved for use in zones 1, 2, 21 and 22 in accord-ance with ATEX 94/9/EC, Equipment group II, Category 2G D. Weight incl. hose: 28 - 34 kg. Material recycling: 100 %

Nederman Hose Reel Series 886 Ex approved




Reel with hose

Reel without hose

Reel with hose

Reel without hose






Part no.

Air / Water 2.0 (295) 12.5 (1/2) 15 12.5 (1/2) Rubber M 3080�689






Part no.

Air / Water 2.0 (295) 12.5 (1/2) 15 12.5 (1/2) M 3080�789





Hose material Hose connections on reel (see end of chapter)

Part no.

Air / Water 2.0 (295) 12.5 (1/2) 25 12.5 (1/2) Rubber M 3080�686

Air / Water 2.0 (295) 19 (3/�) 15 19 (3/�) Rubber M 3080�886






Part no.

Air / Water 2.0 (295) 12.5 (1/2) 25 12.5 (1/2) M 3080�786

Air / Water 2.0 (295) 19 (3/�) 20 19 (3/�) M 3080�986

13 www.nederman.com


The vacuum hose reel facilitates the handling of long and heavy vacuum hoses, and provides tidy and safe storage when they are not in use. Keeps hoses out of the way of forklifts and mobile workshop equipment. Separate suspension brackets make mounting of the reel simple and safe. Weight incl. hose: 26 – 28 kg. Material recycling: 100 %

Nederman Vacuum Hose Reel Series 881

Antistatic reel and vacuum hose.Supplied with automatic damper.Integrated micro-switch.

•••


Reel with hose

Reel without hose


Max. suction, kPa (psi) Hose dimension int. Ø, mm (in) Hose dimension length, m Hose type (see end of chapter) Part no.

�5 (7) 38 (1 1/2) 10 L 30805081

�5 (7) 50 (2) 10 L 3080�881

Max. suction, kPa (psi) For hose dimension int. Ø, mm (in) For hose dimension length, m Hose connections on reel (see end of chapter)

Part no.

�5 (7) 38 (1 1/2) / 50 (2) 10 L 3080�981

1� www.nederman.com


A safe and functional 1-phase cable reel for low and extra low voltage power requirements. Supplied complete with pivot-ing bracket. Also available in static and signal cable versions. Weight incl. cable: 3.5 – 5.0 kg. Material recycling: 100 %

Nederman Cable Reel Series 782

Degree of protection code: IP 44Tested and approved according to IEC 61242.Cable easy replaceable.Rubber power cable.

••••

A heavy duty cable reel for use in industrial environments. Available in 1-phase and 3-phase versions and supplied with thermal overload protector. Accommodates power cable lengths up to 25 m. Components made of composite materials and galvanized steel. Weight incl. cable: 14 – 16 kg. Material recycling: 100 %

Nederman Cable Reel Series 793

* Connection Cable= 1 m long

Voltage, V Amperage, A Max. power, W Phase Conductors, No. x area, mm² Distribution cable length, m Distribution cable type Part no.

230 16 3800 1 3 x 2.5 18 H07RN-F 30700293

230 16 3800 1 3 x 2.5 25 H07RN-F 30700�93

�00 10 6900 3 5 x 2.5 15 H07RN-F 30701293

�00 10 6900 3 5 x 2.5 22 H07RN-F 30701�93


Voltage, V Ampeage, A

Max. power, W

Conductors, No. x area, mm²

Distribution cable length, m

Distribution cable type

Connection cable

Provided with Part no.

�8 6 – 2 x 1.0 12 H05RN-F – – 30701282

�8 6 – 3 x 1.5 12 H07RN-F – Earth wire 30701882

For static electricity 3 x 1.5 12 A05RN-F – Earth clip, connection cable

30701082

250 10 2500 3 x 1.5 12 H07RN-F – Thermal overload, protec-tor, earth conductor

30700�82

250 10 2500 3 x 1.5 12 H07RN-F, Euro socket

1 m, Euro plug Thermal overload, protec-tor, earth conductor

3070�082

Degree of protection code: IP 55Tested and approved according to IEC 61316Rubber power cable

•••

15 www.nederman.com


Accessories for hose reels

Swivelling low pressure couplings - 1.5 MPa (220 psi)

Description Part no.

1 Pivoting wall bracket for Series 876, 883, 888, 889 and 893. Hole spacing and dimensions for wall mounting are the same as on the reel foot plate.

1 Galvanized 30372�07

1 Stainless steel 30372�08

2 Pivoting wall bracket for Series 88� and 886.

2 Galvanized 30373667

2 Stainless steel 30373668

3 Stainless steel swivel for Series 88�, BSP thread.

3 For hose 1.5 MPa (220 psi), 19 mm (3/�”) 30371980

3 For hose 10 MPa (1�50 psi), 12.5 mm (1/2”) 30371979

3 For hose 25 MPa (3625 psi), 10 mm (3/8”) 30371978

� Water gun in chromium plated brass. Blue. Provided with safe hand grip and insulated trigger. Connection = 1/2” Female BSP 30�00110

5 Water gun in stainless steel, quality 316. White. Provided with safe hand grip and insulated trigger. Connection = 1/2” Female BSP 30�00210

6 Water gun for high temperature water. Stainless steel, quality 316. Red. Provided with safe and insulated hand grip and insulated trigger. Connection = 1/2” Female BSP

30�00310

7 Water gun, EX-approved by TÜV for use in Zone 1, 2 and 22. Stainless steel, quality 316. Black. Provided with safe and insulated hand grip and insulated trigger. Connection = 1/2” Female BSP

30�00211

8 Air gun with high blowing force and ergonomic design. Housing and trigger of POM / Acetal plastic. Airpipe in electro-plated steel. Connection = 1/�” Female BSP 30�10110

Description Type Part no

1 1/2” male BSP – 3/8” hose tail – Brass Adapter / Hose tail 30�30110

1 1/2” male BSP – 1/2” hose tail – Brass Adapter / Hose tail 30�30210

1 1/2” male BSP – 3/�” hose tail – Brass Adapter / Hose tail 30�30310

2 1/2” male BSP – 3/8” hose tail – Stainless steel Adapter / Hose tail 30�30�10

2 1/2” male BSP – 1/2” hose tail – Stainless steel Adapter / Hose tail 30�30510

2 1/2” male BSP – 3/�” hose tail – Stainless steel Adapter / Hose tail 30�30610

3 1/2” male BSP – 3/8” male BSP – Brass Adapter / Adapter 30�30710

3 1/2” male BSP – 1/2” male BSP – Brass Adapter / Adapter 30�30810

3 1/2” male BSP – 3/�” male BSP – Brass Adapter / Adapter 30�30910

� 1/2” male BSP – 3/8” male BSP – Stainless steel Adapter / Adapter 30�31010

� 1/2” male BSP – 1/2” male BSP – Stainless steel Adapter / Adapter 30�31110

� 1/2” male BSP – 3/�” male BSP – Stainless steel Adapter / Adapter 30�31210

5 1/2” male BSP – 3/8” female BSP – Brass Adapter / Adapter 30�31510

5 1/2” male BSP – 1/2” female BSP – Brass Adapter / Adapter 30�31610

5 1/2” male BSP – 3/�” female BSP – Brass Adapter / Adapter 30�31710

6 1/2” male BSP – 3/8” female BSP – Stainless steel Adapter / Adapter 30�31810

6 1/2” male BSP – 1/2” female BSP – Stainless steel Adapter / Adapter 30�31910

6 1/2” male BSP – 3/�” female BSP – Stainless steel Adapter / Adapter 30�32010

7 1/2” male BSP – 3/�” female BSP – Stainless steel – EX-approved Adapter / Adapter 30�32110

Swivelling high pressure couplings – 25 MPa (3625 psi)Description Type Part no

3/8” male BSP – 3/8” male BSP – Plated steel Adapter / Adapter 30�31310

3/8” male BSP – 3/8” male BSP – Stainless steel Adapter / Adapter 30�31�10

1 2 3 4 5 6 7 8

1 2 3 4 5 6 7

16 www.nederman.com


Hose Specification Temperature range, min.,

ºC

Temperature range, max., ºC

Hose fittings in free hose end, distribu-

tion hose

Hose fittings in free hose end,

inlet hose

Hose connection on reel, distribu-

tion hose

Hose connec-tion on reel, inlet hose

A Cover in PVC and inner tube in PUR. Syn-thetic textile braid.

–10 +60 Male 1/�” BSP, brass. With spiral hose

protector.

No inlet hose included.

– Hose tail 3/8” + clamp.

B Cover in NBR / PVC and inner tube in NBR. Synthetic textile braid.

–30 +100 Male BSP, chrome plated.

– Hose tail + clamp. Hose tail 1/2” + clamp.

D Cover in NBR / PVC and inner tube in NBR. Synthetic textile braid.

–30 +100 Male BSP, chrome plated.

– Hose tail + clamp. Hose tail + clamp.

E Cover in NBR / PVC and inner tube in food grade quality NBR. Synthetic textile braid.

–20 +100 Male BSP 60° cone, chrome plated.

Female BSP 60° cone, chrome

plated.

Male BSP 60° cone

Male BSP 60° cone

F Cover in NBR / PVC and inner tube in food grade quality NBR. Synthetic textile braid.

–20 +100 Male BSP 60° cone, stainless steel.

Female BSP 60° cone, stainless

steel.

Male BSP 60° cone.

Male BSP 60° cone.

G Cover and inner tube in synthetic rubber. Single steel braid.

–�0 +155 Female BSP 60° cone, chrome plated. With

rubber hose grip.


plated.

Male BSP 60° cone.

Male BSP 60° cone.

H Cover and inner tube in synthetic rubber. Single steel braid.

–�0 +155 Female BSP 60° cone, stainless steel. With

rubber hose grip.


steel.

Male BSP 60° cone.

Male BSP 60° cone.

I Cover and inner tube in SBR based rubber. Single steel braid.

–�0 +100 Female BSP 60° cone, chrome plated.


plated.

Male BSP 60° cone.

Male BSP 60° cone.

J Cover and inner tube in synthetic, oil resistant rubber. Double steel braid

–�0 +100 Female BSP 60° cone, chrome plated.


plated.

Male BSP 60° cone.

Male BSP 60° cone.

K Cover and inner tube in rubber, synthetic textile braid (acc. to EN-559).

–20 +80 – – Hose tail + clamp. Hose tail + clamp.

L Corrugated ethyl-vinyl-acetate (EVA). Electri-cally conductive.

–�0 +70 – No inlet hose included.

Included for Ø 38 mm and Ø 50 mm.

Ø 63 mm

M Cover in CR and inner tube in NBR. Synthetic textile braid. Electrically conductive.

–30 +80 Female BSP 60° cone, stainless steel.


steel.

Male BSP 60° cone.

Male BSP 60° cone.

Hose specifications

NB! Thread dimensions of hose fittings and dimensions of hose tails are always the same as the hose dimension, unless otherwise stated.

17 www.nederman.com

1 2


Accessories for cable reels


1 Pivoting wall bracket for Series 793. Hole spacing and dimensions for all mounting are the same as on the reel foot plate. 30372�07

2 Fluorescent hand lamp, 230 V AC, 50 Hz, 11 W. Delivered without power cable. 30�20110

2 Fluorescent hand lamp, 2� V AC, 50 Hz, 11 W. Delivered without power cable. 30�20210

Ser. 810 Balancer makes the tool weightless and minimises the strain on the operator. The balancer comes in three different models and in nine weight classes, with a span from 0.5 kg to 10.9 kg. Covering material: composite.

Nederman Balancers Series 810

Designed with safety-chain mounting point.Convenient snap-type tool clip.With clevis and pin shackle for quick and easy mounting.

•••

Type Lift power, kg Cord length, m Cord material Part no.

A 0.5 - 0.9 1.6 Nylon cord 30800110

A 0.9 -1.8 1.6 Nylon cord 30800210

B 1.8 - 2.7 2.0 Steel wire 30800310

B 2.7 - 3.6 2.0 Steel wire 30800�10

C 2.7 - �.0 2.0 Steel wire 30800510

C �.0 - 5.9 2.0 Steel wire 30800610

C 5.9 - 8.2 2.0 Steel wire 30800710

C 8.2 - 10.9 2.0 Steel wire 30800810

1 2

A B C

18 www.nederman.com


Guide to extraction arms in non-explosive environments

Standard Telescopic Original NEX MD NEX HD

Light applications. Extraction of fumes, vapours and dust. Schools, limited spaces, small booths.

X X X

Medium applications. Extraction of fumes, vapours and dust. Small workshops, metal fabrication shops.

X X X

Heavy applications. Extraction of heavy smoke, vapours and dust. Heavy engineering workshops, welding, laser cutting, grinding with spatter.

X X

Standard Telescopic Original NEX MD NEX HD

Recommended airflows, m³/h 600-900 600-1000 700-1000 900-1300 1000-1900

Maximum fume temperature, °C 70 70 70 70 120

Noise level at hood, dB(A) 67 70 63-75 69 63

Damper Optional Optional Standard Standard Standard

Hose material PVC covered aluminium foil

PVC covered polyester fabric



Glass fibre reinforced PVC, PVC covered polyester fabric

Connection Ø, mm 160 150/160 150/160 160 200

Note Built in wall bracket 360° swivel 360° swivel 360° swivel 360° swivel

Guide to Ex-approved extraction arms in explosive environments

The NEX range of extraction arms is specially designed for working environments with fumes, vapours or explosive dust and also where the hygienic demands are high and large airflows are required. Typical work-places can be found in industries such as: pharmaceutical, food process and technical chemical. All arms are ex-approved.

NEX D NEX DX NEX S

Marking: EX II 3 D Marking: EX II 2 D Marking: EX II 2 D/G

II – Group II above ground, not mining II – Group II above ground, not mining II – Group II above ground, not mining

3 – Equipment category 3 working in zone 22 3 – Equipment category 2 working in zone 21 3 – Equipment category 2 working in zone 1/21

D – To be used in environments with explosive dust D – To be used in environments with explosive dust D – To be used in environments with explosive dust

G – To be used in environments with explosive gas

NEX D NEX DX NEX S

Recommended airflows, m³/h 900-1700 900-1700 600-1100 (Ø 125 mm)

900-1700 (Ø 160 mm)

Maximum fume temperature, °C 70 70 70

Noise level at hood, dB(A) 55-80 55-80 65-70

Damper Optional Optional No

Hose material PVC Antistatic Polyurethane Antistatic Polyurethane

Connection Ø, mm 160 160 125 and 160

Note 360° swivel 360° swivel 180° swivel

19 www.nederman.com

1600230 900307

Ø160

Ø9 (x4)

198,

5

~230

0

(mm)


The Nederman Telescopic arm is specially designed for working envi-ronments with fumes, vapours or non explosive dust, where the space is limited. Typical workplaces can be welding schools or for production in small welding booths. The applications can be welding, grinding, or other industrial processes where a small, easily positioned arm is required. The reach of the arm is between 0.9 and 1.6m.

X: airflow m3/h Y: static pressure Pa

Pressure drop


The arm is flexible in all directions and simple to position and to extendThe arm has a balanced telescopic action by an adjustable balance blockThe assembly is suspended by a swivel, which allows it to rotate 360 degreesThe hood can be tilted in all directions

•••

•

Description Reach, m Airflow, m³/h

Connection Ø, mm

Max. fume tempera-ture, ºC

Noise level at hood, dB(A)

Weight, kg

Part no.

Telescopic arm with metal hood 0.9-1.6 600-1000 160 70 76 12 10502531

Telescopic arm with Original hood 0.9-1.6 600-1000 160 70 76 12 10502331

Kit consists of Part no.

Telescopic arm with Original hood + N16 3 phase 230/400V fan + Wall bracket + Fan Manual Starter 10230010

Telescopic arm with Original hood + N24 3 phase 230/400V fan + Wall bracket + Fan Manual Starter 10230020

Extraction Arm Telescopic

20 www.nederman.com

95Ø160

209

146

1600

- 23

00

Ø 12 (x4)


Extraction Arm StandardNederman Extraction Arm Standard is specially designed for working en-vironments with fumes, vapours or non explosive dust, where the demands for higher airflows and temperatures are moderate. Typical workplaces can be welding schools, different types of applications in light production. The applications can be welding, grinding, or other industrial processes where an easily positioned arm is required. The arm is available in two lengths, 2 and 3m and equipped with a high efficiency extraction hood.

The arm is flexible in all directions and simple to positionThe arm has a compact designDesigned for wall mounting and suspended by an integrated wall bracket/90 degree bendAllows rotation of 180 degreesCan be equipped with a damper placed in the bend as an accessoryThe hood can be tilted in all directions

•••

•••

Pressure drop


Description Reach, m Airflow, m³/h Connection Ø, mm Max. fume temperature, ºC Noise level at hood, dB(A) Weight, kg Part no.

Standard arm 2m 2 600-900 160 70 67 11 10500238

Standard arm 3m 3 600-900 160 70 67 13 10500338


Standard arm 2m + N16 3 phase 230/400V fan + Wall bracket + Fan Manual Starter 10530331

Standard arm 3m + N16 3 phase 230/400V fan + Wall bracket + Fan Manual Starter 10530431

X: airflow m3/h Y: static pressure Pa A: 3 m B: 2 m

21 www.nederman.com

Ø 9 (x4)

230

(mm)307

Ø 160

198,

5

~240

0


Extraction Arm OriginalIt is specially designed for working environments with fumes, vapours or non explosive dust. Typical workplaces are the metal fabrication industry or other type of industries where extraction is needed. The applications can be welding, grinding, or other industrial processes where an easily po-sitioned arm is required. The arm is available in four types: 2m, 3m, 4mH, horizontal (Long reach and fits under low ceilings), 4mV, vertical (Long reach for work when the need for extraction at both high and low levels).

Swivel allows the product to rotate 360 degreesThe arm is flexible in all directions and simple to positionThe product can be mounted in combination with different brackets, extension arms, on exhaust rails or on fixed or mobile filter equipment.The product is equipped with a damper in the hood as standardThe hood on all models can be tilted in all directions

•••

••

X: airflow m3/h Y: static pressure Pa A= 4 m horizontal, B= 4 m vertical, C= 3 m, D= 2 m



Original arm 2m + N16, 3 phase, 230/400V fan + Wall bracket + Fan Manual Starter 10230030

Original arm 3m + N24, 3 phase, 230/400V fan + Wall bracket + Fan Manual Starter 10230040

Original arm 4m vertical + N24, 3 phase, 230/400V fan + Wall bracket + Fan Manual Starter 10230050

Pressure drop


Original arm 2m 2 700-1000 150/160 70 63-75 11 10554235

Original arm 3m 3 700-1000 150/160 70 63-75 13 10554335

Original arm 4m vertical 4 700-1000 150/160 70 63-75 16 10554435

Original arm 4m horizontal

4 700-1000 150/160 70 63-75 16 10554535

22 www.nederman.com

225

~230

0

230

160

Ø 1

1 (x

4)

Ø 160

(mm)


Extraction Arm NEX MDNederman NEX MD is an extraction arm for medium to heavy duty ap-plications. The arm has a Ø160 mm hose, which together with the external arm system provides a high air flow and a low pressure drop.

Robust swivel - allows 360° rotationPerfectly balanced and simple to positionEncapsulated support mechanism protects the arm against dust and dirtCan be mounted on brackets, extension arms and exhaust railsThe design of the hood ensures very high capture capacity and low noise levelWith a damper in the hood - saves energy when not in operationThe hose is easy to remove for cleaningThe hood can be tilted in all directions

•••••

•••

700 900 1100 1200 1300



NEX MD 2m 2 900-1300 160 70 66 16 10561032

NEX MD 3m 3 900-1300 160 70 63 20 10561132

NEX MD 4m 4 900-1300 160 70 63 27 10561232

NEX MD 5m 5 900-1300 160 70 63 32 10561332

Pressure drop

X: airflow m3/h Y: static pressure Pa A: 5 m, B: 4 m, C: 2 m and 3 m

23 www.nederman.com


~230

016

022

5

Ø 1

1 (x

4)

Ø 200230

(mm)


Extraction Arm NEX HDThe Nederman NEX HD extraction arm is the top of the range arm when it comes to high airflows and extraction of media with higher temperatures than normal. The arm is specially designed for working environments with very heavy smoke, vapours or non explosive dust. The applications can be welding, laser or hand plasma cutting, metal spraying, grinding where lots of spatter is generated, or other industrial processes where a perfectly balanced and easily positioned arm is required.

Robust swivel, which allows the product to rotate 360 degreesFlexible in all directions, perfectly balanced and very simple to positionSupport mechanism of the arms are encapsulated which protects against dirtCan be mounted in combination with different brackets, extension arms or on exhaust railsEquipped with a damper in the hood as standardThe hose is mounted parallel to the support arm by straps, which makes the hose very easy to remove for cleaningMinimised pressure drop and a low noise level

•••

•

••

•

Pressure drop


NEX HD 2m 2 1000-1900 200 120 66 17 10560232

NEX HD 3m 3 1000-1900 200 120 63 21 10560332

NEX HD 4m 4 1000-1900 200 120 63 28 10560432

NEX HD 5m 5 1000-1900 200 120 63 33 10560532

X: airflow m3/h Y: static pressure Pa A: 5 m, B: 4 m, C: 3 m, D: 2 m

24 www.nederman.com

2700

-300

048

0

180

Ø14x4

Extension arm 4.2 m:

Extension arm 6.0 m:

4100

6050

90

2210

3100


The Nederman Extension Arm, 4.2 m or 6.0 m, is designed to be used when extra reach is needed. Combine it with fume or dust extraction arms, or exhaust extraction equipment for cars or trucks. Made of robust steel profiles. Suspended by a pivoting wall bracket and equipped with a joint in the middle, which makes it flexible in all directions. It is possible to add other equipment to the Extension Arm, such as welding machines, and hose and cable reels.

A universal bracket makes it possible to fit additional equipment directly on to the Extension ArmRecommended additional equipment: Extraction Arm Original, NEX MD or NEX HD (each max. 4 m), Single or Twin Exhaust Extractor or Exhaust Hose Reel - see pictures to the leftThe duct kit must be ordered separately

•

•

•

X: airflow m3/h Y: static pressure Pa A: Extension Arm bent 40 ° (to its limit). B: Extension Arm bent 90 °. C: Extension Arm is straight.

Pressure drop

Description Recovery rate by weight, % Weight, kg Part no

Extension Arm 4.2 m 100 73 10506635

Extension Arm 6.0 m 100 93 10507735

Duct kit consists of Max temp of extracted air, ºC Recovery rate by weight, % Weight, kg Materials Part no

Duct kit 4.2 m Fume 120 92 8 Galvanized steel duct, PVC coated glass fibre hose 10374376

Duct kit 4.2 m Exhaust 150 57 12 Galvanized steel duct, NR-B hose 10374375

Duct kit 6.0 m Fume 120 95 13 Galvanized steel duct, PVC coated glass fibre hose 10374360

Duct kit 6.0 m Exhaust 150 71 17 Galvanized steel duct, NR-B hose 10374374

Accessory Recovery rate by weight, % Weight, kg Materials Part no

Cable for light kit - - - 10345292

Suspension for Exhaust Hose Reel 100 2 Powder painted steel 20374358

Recommended airflows Max. 2000 m³/h

Recommended maximum negative pressure 3000 Pa

Connection diameter 200 mm

Maximum load on outer arm 4.2 m 100 kg

Maximum load on outer arm 6.0 m 60 kg

Recommended installation height from floor level 2.7-3.0 m

Extension Arm

25 www.nederman.com


Fume Extractor on RailThe Nederman Fume extractor trolley with extractor arm, is intended to be used in combination with the rail Nederman ALU 150 when extraction from long working areas is required.

One extraction arm can serve several work placesThe trolley is easily moved along the railSuitable when welding along long work piecesThe trolley fits all Nederman extraction arms

••••

Recommended extraction arms

Extraction Arm Original Maximum 4 m

Extraction Arm Telescopic All models

Extraction Arm NEX MD Maximum 4 m

Extraction Arm NEX HD Maximum 4 m

Accessory Part no.

Top outlet, Ø 200 mm 20940410

* Including rubber lips, joint connectors, suspension brackets, limit stops and end covers.

Description Length, m Part no.

Trolley 20940210

Rail stiffener, one pc per metre rail 20373942

Straight rail ALU 150* 2.5 20900510





















26 www.nederman.com


Extraction Arm BodyworkThe Nederman Bodywork extraction arm is based on the Original arm. It is specially designed for the extraction of fume, dust and vapours created during vehicle bodywork when welding, grinding or painting. The arm is available in a length of 5m. The product can be mounted in combination with different types of brackets.

A swivel allows the product to rotate 360 degreesThe arm is flexible in all directions and simple to positionThe product is equipped with a damper in the hood as standardTwo 4-way friction joints makes it easy to position above or below vehicle bodyThe 5m length gives easy access to all four corners of the vehicle

••••

•


Bodywork Arm 5m 5 700-1000 150/160 70 65-70 18 10554935

Mou

ntin

g hi

ght a

ppro

x. 4

m.


Pressure drop


27 www.nederman.com


Extraction Arm WindscreenThe Nederman Windscreen extraction arm is based on the Original arm and specially designed for extraction of adhesive vapours generated when working with windscreens, when removing, replacing or mounting. The arm is available in a length of 4m. Hood dimension: 1200 x 640 mm.

Suspended by a swivel, which allows the product to rotate 360 degreesFlexible in all directions and simple to positionCan be mounted in combination with different brackets, extension arms or on exhaust railsEquipped with a damper in the hood as standardRectangular extraction hood with an elongated opening along the edge, designed to take care of the vapours when working with windscreen glue

•••

••

Description Reach, m Airflow, m³/h Connection Ø, mm

Max. fume tempera-ture, ºC


Weight, kg

Part no.

Windscreen hood with damper on an Original 4m Horizontal arm

4 700-900 150/160 70 65-70 17 10553535

Windscreen hood with damper - 700-900 150/160 70 - 2 10372173


Original arm 4m Horizontal + N16 3 phase 230/400V fan + Wall bracket + Fan Manual Starter + Windscreen Hood 10230260

Original arm 4m Horizontal + N24 3 phase 230/400V fan + Wall bracket + Fan Manual Starter + Windscreen Hood 10230270

Hood dimension: 1200 x 640 mm.


28 www.nederman.com

2300

160

225

Ø 1

1 (x

4)

230Ø160

320

(mm)


Extraction Arm NEX DThe Nederman NEX D is equipped with an earthed ventilation hose made of FDA approved ingredients. The NEX D arm is suitable for indus-tries where hygiene is a top priority. NEX D has concealed joints and a separate easy to mount hose. Enclosed support arm, separate hose and a stainless steel hood means the NEX arm requires little maintenance and is easy to clean. The Nederman NEX D is approved for explosive environ-ments and marked as follows according to the ATEX-directive 94/9/EC: EX II 3 D II: Group II, for use above ground. (Not for mining) 3: Equip-ment category 3, working in zone 22 D: To be used in environments with explosive dust The arm is single earthed by the helix in the hose. The hose is made of PVC with FDA approved components.

Description Reach, m Airflow, m³/h Connection Ø, mm Max. fume temperature, ºC Noise level at hood, dB(A)

Weight, kg

Part no.

NEX D 2m 2 900-1700 160 70 56-81 17 10500232

NEX D 3m 3 900-1700 160 70 55-80 21 10500332

NEX D 4m 4 900-1700 160 70 54-77 28 10500432

NEX D 5m 5 900-1700 160 70 54-77 32 10500532

NEX D 2m, hood with damper 2 900-1700 160 70 56-81 17 10501232




Pressure drop



29 www.nederman.com

2300

160

225

Ø 1

1 (x

4)

230Ø160

320

(mm)


Extraction Arm NEX DXThe Nederman DX has a double earthed system, antistatic earthed ventila-tion hose that prevents static electricity and sparks. The arm is suitable for industries where hygiene is a top priority. NEX DX has concealed joints and a separate easy to mount hose. Enclosed support arm, separate hose and a stainless steel hood means the DX arms require little maintenance and is easy to clean.

The Nederman NEX DX is approved for explosive environments and marked as follows according to the ATEX-directive 94/9/EC: EX II 2 D II: Group II, for use above ground. (Not for mining) 2: Equipment category 2, working in zone 21 D: To be used in environments with explosive dust The arm is double earthed, by the helix in the hose and through the arm system. The hose is made of antistatic Polyurethane.


Description Reach, m Airflow, m³/h Connection Ø, mm

Max. fume temperature, ºC


Weight, kg

Part no.

NEX DX 2m 2 900-1700 160 70 56-81 17 10502232

NEX DX 3m 3 900-1700 160 70 55-80 21 10502332

NEX DX 4m 4 900-1700 160 70 54-77 28 10502432

NEX DX 5m 5 900-1700 160 70 54-77 32 10502532

NEX DX 2m, hood with damper 2 900-1700 160 70 56-81 17 10503232




Pressure drop


30 www.nederman.com

2100

165

151

(mm) Ø 125/ Ø 160

Ø 13

(x4)


Extraction Arm NEX SThe NEX S arm fulfills all requirements for use in environments contain-ing explosive dust and gas, and with extremely high hygienic demands. It has a double earthed system and antistatic earthed ventilation hose that prevents static electricity and sparks. Open support arm system and hood of acid proofed polished stainless steel requires little maintenance and makes it easy to clean.

NEX S is approved for explosive environments and marked as follows ac-cording to the ATEX-directive 94/9/EC: EX II 2 D/G II: Group II, for use above ground. (Not for mining) 2: Equipment category 2, working in zone 1/21 D: To be used in environments with explosive dust G: To be used in environments with explosive gas. The arm is double earthed, by the helix in the hose and through the arm system.

The arm is flexible in all directions and simple to positionCompletely closed profiles, for maximum protectionAll parts can be cleaned with liquids up to 80º C and with detergents with PH value up to 12The hose is mounted parallel to the support arm by straps, which makes the hose very easy to remove for cleaning

•••

•


NEX S 2m 2 550-1000 125 70 65 13 10520232

NEX S 3m 3 550-1000 125 70 65 14 10520332

NEX S 4m 4 550-1000 125 70 66 22 10520432

NEX S 2m 2 900-1700 160 70 71 20 10521232

NEX S 3m 3 900-1700 160 70 68 17 10521332

NEX S 4m 4 900-1700 160 70 70 24 10521432

Pressure drop

X: airflow m3/h Y: static pressure Pa A= 4 m Ø125 mm, B= 3 m Ø125 mm, C= 2 m Ø125 mm, D= 4 m Ø160 mm, E= 3 m Ø160 mm, F= 2 m Ø160 mm


31 www.nederman.com


Extraction Arm Accessories

Description NEX HD NEX MD NEX D NEX DX Original Telescopic Standard Arm

Part no.

1 Wall bracket for 2 m and 3 m arm X X X X 10372215

2 Wall bracket for 4 m and 5 m arm X X X X 10372722

3 1 m Extension wall bracket X X X X 10512732

4 2 m Extension wall bracket X X X X 10512832

5 Wall bracket X X 10550635

6 1 m Extension wall bracket X X 10550735

7 2 m Extension wall bracket X X 10550835

8 Spotlight/Fan Switch, 24V, 20W, Original hood * X X X 10551235

Relay for spotlight part no. 10551235 * X X X 14374307

8 Spotlight/Fan Switch, 24V, 20W, Metal hood X X 10507435

8 Spotlight/Fan Switch, 24V, 20W X 10512432

8 Spotlight/Fan Switch, 24V, 20W, MD hood X 10554635

9 Fan Switch X 10512532

9 Fan Switch, Metal hood X X 10371080

10 Spark protection, Original hood X X X 10551335

10 Spark protection, Metal hood X X 10373118

10 Spark protection NEX HD X 10512632

11 Metal hood with damper X X 10321542

12 Damper X 10500438

13 Silencer for fan X X 14502126

13 Silencer for fan X X 14502626

14 Wall bracket for silencer X X X X 14343089

When using external power 24 V and no Nederman Fan Starter, a relay (part no. 14374307) must be installed between the spotlight and the contactor.

1 2 3 4 5 6 7

8 9 10 11 12 13 14

32 www.nederman.com


33 www.nederman.com


Portable, easy to carryLow service costs

••

Connected to a welding torch or to an extraction nozzle, the FE 840/841 unit extracts the fume directly at source. The automatic version has an in-dicator which indicates when the filter is full. Small, lightweight, portable extraction units designed to be carried to the working area

FE840 has a manual start/stop function.

Fume Eliminator 840/841

FE 840

FE841 has an automatic start/stop function which starts the unit as soon as the welding begins.

FE 841

Voltage, V Part no.

230 - EUR 70840000

120 - UK 70840100

240 - UK 70840442

Voltage, V Part no.

230 - EUR 70841000

120 - UK 70841100

240 - UK 70841010

Accessories for FE 840 and FE 841 Part no.

Nozzle TM 80, length 500 mm, Ø80 mm 70851000

Nozzle TM 200, length 570 mm, slot width 200 mm, slot height 30 mm 70854000

Nozzle TM 300, slot width 300 mm, slot height 5 mm 70853000

Hose, Ø45 mm, 5 metres 70400026

Hose, Ø45 mm, 15 metres 70400028

Airflow with 2.5 m hose, m³/h 150

Filtration efficiency, % 99.7

Max. vacuum, kPa 22

Power, W 1000

Noise level, dB(A) 73

Length, mm 830

Width, mm 230

Height, mm 410

Weight, kg 16

34 www.nederman.com

485

Ø 400

767

160 Ø

Ø 11

31039

5

(mm)


MFS offers maximum flexibility through its unique modular concept of standard mounting and filter elements. Virtually any combination can be achieved, from a single filter assembly, to larger multi-stage filter systems combining particle, HEPA and Gas. For filtration of both particles and gases, place the particle filter before the gas filter. To increase the total airflow capacity place further filter assemblies in parallel. Applications: TIG and spot welding, laboratory extraction, food ingredients and odours, chemical handling etc.

MFS – Modular Filter System

Few parts - easy installationModular design - easy to expand the filter capacityParticle, HEPA and gas filters can be combined

•••

Partical filter

Carbon filter

Installation Example

35 www.nederman.com


Replacement filter Part no

Particle filter without console 12600711

Micro / HEPA filter without console 12603361

Gas filter without console 12603461

Accessory Part no.

Console for MFS 12600644

Pressure Drop

MFS with Particle filter

Part no. 12600144

Filter surface 18 m2

Filtration degree 99 %*

Weight 8.8 kg

Material cylinder Cellulose paper

Material filter media Cellulose paper, BIA Category M

For ultra fine and contaminating parti-cles. A complete filter unit includes filter cartridge, console and two connections.

MFS with Micro filter & HEPA

*) acc. to EN 1822, H 13

Part no. 12600444

Filter surface 14 m2

Filtration efficiency 99,95% *

Weight 6.4 kg

Material Cylinder Cellulose paper

Material Filter media Micro fibreglass

Absorbs smells, gases, smoke and organic solvents (toluene and meth-ylethylketone). A complete filter unit includes filter cartridge, console and two connections.

Pressure Drop

MFS with Gas filter & Carbon

The flow of air should not exceed 500 m3/h per filter unit. The lower the flow of air, the better the filtration ability/absorption.

Part no. 12600544

Weight total 21 kg

Weight filtration media 15 kg

Material Cylinder Cellulose paper

Material Filter media Activated carbon

For welding smoke, dust and large parti-cles. A complete filter unit includes filter cartridge, console and two connections.

Pressure Drop


Original arm 2 m + MFS filter unit with Particle filter (incl bracket) + fan N24, 3 phase, 230/400V, 50 Hz, 0.5 kW + Fan Manual Starter

12610544

Original arm 4 m horizontal + MFS filter unit with Particle filter (incl bracket) + fan N24, 3 phase, 230/400V, 50 Hz, 0.5 kW + Fan Manual Starter

12610644

36 www.nederman.com

1145

240

min. 680

max. 2000

1270

2m a

rm: m

ax 1

650

770

Ø 340

240

1145

min. 730

max. 2000/3000

Ø 160

770

1410

2 m

arm

: max

165

03

m a

rm: m

ax 2

050


FilterCart

(mm) Horizontally swivelling arm

Voltage, V Power, kW Arm length, m Part no.

230 - EUR 0.75 2 12611245

240 - UK 0.75 2 12613245

110 - UK 0.75 2 12612245

FilterCart Original

FilterCart Original has the best performance when it comes to welding ap-plications. The integrated spotlight optimizes the user-friendly design. If a larger working range is needed, 3m long arm is recommended.



230 - EUR 0.75 2 12621245

240 - UK 0.75 2 12623245

110 - UK 0.75 2 12622245

230 - EUR 0.75 3 12621345

240 - UK 0.75 3 12623345

110 - UK 0.75 3 12622345

Replacement filter Part no.

28m² flame retardant pleated cellulose material. = 97% efficiency for welding fume. Measured according to the test procedures in EN 15012-1.

12374024



12374023

Accessory Part no.

HEPA filter H13, 7.5m² high efficiency final filter, class H13. 12374016

Spark protection, for mounting in the hood. To reduce risk of fire. 10551335

Arm length, m 2

Max airflow, m³/h 1050

Weight, kg 71-73

Arm Ø, mm 160


Filter efficiency, % 99

Filter area, m2 35

Frequency, Hz 50

Phase 1

Power, kW 0.75

Arm length, m 2


Weight, kg 60

Arm Ø, mm 160



Filter area, m2 28

Frequency, Hz 50

Phase 1

Power, kW 0.75

FilterCart Standard A mobile, easy to manoeuvre filter unit for use in e.g. welding fabrication and repair workshops. Available in four models - Standard, Original, W3 and Carbon for extraction of fumes and dust in various types of applica-tions. FilterCart Standard includes all basic features, such as a high filtra-tion grade and high capturing efficiency.

37 www.nederman.com

240

Ø 350

1145 770

min. 685

max. 2000/3000

1410

2 m

arm

: max

165

03

m a

rm: m

ax 2

050

3 m

arm

: max

165

0

1410

max. 2000

min. 680

7701145

240

Ø 340


FilterCart W3


FilterCart W3 is “state of the art” with all possible features. The W3 model fullfills the legislations W3 from BIA. The specially designed hood with integrated spotlight creates maximum air velocity at the welding spot.

FilterCart Carbon

FilterCart™ Carbon is a specially designed mobile filter for odours. The FilterCart can be equipped with HEPA filter for maximum efficiency. Ap-plications: Solvents, fumes and other gas contaminants.



230 - EUR 0.55 2 12641245

240 - UK 0.55 2 12643245

110 - UK 0.55 2 12642245



12374023

Accessory Part no.


Spark protection, for mounting in the hood. To reduce risk of fire. 10551335

Accessory Part no.


Replacement carbon Part no.

20kg activated antracite carbon for general use. 12374025

Arm length, m 2

Airflow, m³/h 600-1050

Weight, kg 71-73

Arm Ø, mm 160



Filter area, m2 35

Frequency, Hz 50

Phase 1

Power, kW 0.75


230 - EUR 0.75 2 12631245

240 - UK 0.75 2 12633245

110 - UK 0.75 2 12632245

230 - EUR 0.75 3 12631345

240 - UK 0.75 3 12633345

110 - UK 0.75 3 12632345

Arm length, m 2


Weight, kg 82

Arm Ø, mm 160



Filter 20 kg activated carbon

Frequency, Hz 50

Phase 1

Power, kW 0.55

38 www.nederman.com

product highres


Simple installationModular system to meet individual requirementsWell proven technique

•••

Flexible and modular system that solves most common demands regard-ing welding fumes and dust. Accessories can be attached to improve individual applications. Can be combined to work as a mobile unit or as a fixed mounted unit. For extra efficient filter cleaning the FilterBox can be equipped with compressed air cleaning. FilterBox in Spaceblue is de-signed especially for food, medical or chemical industry. All features ap-ply to the standard model. Picture shows complete mobile FilterBox unit.

FilterBox

Pressure Drop

The pressure drop across the FilterBox varies with air flow and dust load. Maintaining a certain average airflow with increasing dust load requires a shorter interval between cleaning. 1) heavy load 2) light load, welding 3) light load, dust 4) clean filter cartridge Grey areas describe average operating range

(mm) *)Recommended mounting height from floor. **) Minimum distance from wall to achieve filter car-tridge change. Manual filter cleaning.

Description Noise level, dB(A) Weight, kg

FilterBox with silencer, 3 m arm, fan N24 61

FilterBox with silencer, 3 m arm, fan N29 68

FilterBox without silencer, 3 m arm, fan N24 72

FilterBox without silencer, 3 m arm, fan N24 75

FilterBox excl. extractor arm, fan, silencer 65

Type of kit Kit consists of Part no.

Wall mounted Basic Filter Standard PW13 + Original arm 3 m + Fan N24, 3 phase, 230/400V, 50 Hz, 0.9 kW. Note! Silencer not included! 12640663

Wall mounted Standard Filter Standard PW13, 3-phase, 400 V + Original arm 3 m + Fan N29, 3-phase, 230/400 V, 50 Hz, 2.2 kW + Silencer 12640963

Wall mounted Monitor Filter Standard PW13, 3-phase, 400 V + Original arm 3 m (incl light) + Fan N29, 3-phase, 230/400 V, 50 Hz, 2.2 kW + Silencer 12641263

Floor mounted Basic Filter Standard PW13 + Original arm 3 m + Fan N24, 3 phase, 230/400V, 50 Hz, 0.9 kW. Note! Silencer not included! 12640563

Floor mounted Standard Filter Standard PW13, 3-phase, 400 V + Original arm 3 m + Fan N29, 3-phase, 230/400 V, 50 Hz, 2.2 kW + Silencer 12640863

Floor mounted Monitor Filter Standard PW13, 3-phase, 400 V + Original arm 3 m + Fan N29, 3-phase, 230/400 V, 50 Hz, 2.2 kW + Silencer 12641163

Mobile unit Basic Filter Standard PW13 + Original arm 3 m + Fan N24, 3 phase, 230/400V, 50 Hz, 0.9 kW. Note! Silencer not included! 12640763

Mobile unit Standard Filter Standard PW13, 3-phase, 400 V + Original arm 3 m (incl light) + Fan N29, 3-phase, 230/400 V, 50 Hz, 2.2 kW + Silencer 12641063

Mobile unit Monitor Filter Standard PW13, 3-phase, 400 V + Original arm 3 m (incl light) + Fan N29, 3-phase, 230/400 V, 50 Hz, 2.2 kW + Silencer 12641363

39 www.nederman.com


Filter cartridge Filter cleaning Voltage, V Phase* Part no.

No filter Motor + Compr. air 400 3 12640463

PW13 Motor + Compr. air 400 3 12642463

Filter cartridge Filter cleaning Voltage, V Phase* Part no.

No filter Motor 400 3 12630463

PW13 Motor 110 1 12631063

PW13 Motor 230 1 12631163

PW13 Motor 230 3 12631363

PW13 Motor 400 3 12631463



PWHE15 Motor + Compr. air 400 3 12635463

Filter cartridge Part no.

PW13 12600163

PW13 (space blue) 12606263

Semi-automatic filter cleaning manually initi-ated. Can be combined with compressed air cleaning. For welding and dust applications.

FilterBox Monitor

The FilterBox unit is also available in space blue for food and chemical applications.

Manually filter cleaning by a hand crank. For simple welding and dust applications with no need for automatics.

FilterBox Basic


1 Fan N29 for heavy duty and long duct systems, 1000-1200 m3/h, 2.2 kW, 220 - 240 / 380 - 420V, 3-phase, 50Hz

14510829

2 Fan N24 for light dust , 800-1000 m3/h, 0.75 kW, 110 - 120 / 220 - 240V, 1-phase, 50Hz

14510122

2 Fan N24 for light dust , 800-1000 m3/h, 0.9 kW, 200 - 240 / 280 - 420V, 3-phase, 50Hz

14510422

3 Extractor arm, max length for arm on mobile unit: 3 m. (See separate brochures for Original Arm, NEX MD, and NEX HD)

4 Silencer, blue 12371420

4 Silencer, space blue 12371569

5 Floor stand for FilterBox with fan 12371422

6 Floor stand for FilterBox connected to central fan 12371423

7 Trolley 12371421

8 Bracket for wall mounting box with fan 12371424

9 Additional bracket for mounting fan N24 on the FilterBox 12371018

Cable set, 220/240V, 1 phase 12363606

Cable set, 110V, 1 phase 12363608

Cable set, 3 phase 12363609

Compressed air cleaning, 4-6 bar 12333354

FilterBox Monitor

FilterBox Basic

FilterBox Standard

Combination Possibilities

Replacement filter

Use for Efficiency, %

Area, m2

Part no

PW13 Welding 99 13 12332672

PW HE15 Dust, stainless steel welding

99.90 15 12371106

PWA HE15 Dust (antistatic) 99.90 15 12371412

*) Motor protector included.

SpaceblueFilter cartridge Filter cleaning Voltage, V Phase* Part no.

PW13 Motor 230 1 12633163

PW13 Motor 230 3 12633363

PW13 Motor 400 3 12633463

PWHE15 (antistatic) Motor + Compr. air 400 3 12637463

FilterBox Standard Spaceblue

Fully automatic mechanical filter cleaning, normally combined with compressed air cleaning. For heavy welding applications.

40 www.nederman.com

1527592

203Ø315

Ø31

5

Ø31

5

2163

1887

1342 362

912803

398

816

50

1181

Ø20

735

601


FilterMax C25 with fan, filters and control panel is a compact stand alone unit for low volume applications where space is limited. The filtration properties of the unit are excellent with low operating pressure and high filtration efficiency for welding and cutting fumes. Fully automatic cleaning. For indoor installation only.

Voltage, V Phase Part no.

400 3 12630167

230 3 12630267

Air capacity, m³/h 1500-2750

Max. operating temp., ºC 50

Min. operating temp., ºC -10

Compressed air, minimum, bar 4

Compressed air, maximum, bar 5

Volume air/cleaning pulse, liters 32

Fan, integrated, kW 3

Filter cartridge 4 x FilterMax Basic PW

Total filter area, m2 48

Efficiency at 0.5 um, % 99

Weight, kg 500

Accessory Part no.

Filter regulator. Is used for setting the correct air pressure. 12372064

Pressure gauge kit. Measures the pressure drop over the filter cartridges. 12372063

dP Control kit. Pressure drop controlled cleaning for more efficient operation. 12373321

A number of different types of filter cartridges are available, for details please contact your nearest Nederman dealer.

FilterMax C25

41 www.nederman.com


42 www.nederman.com


NOM 4 is designed for single CNC machines with limited oilmist and enclosed cabinet. The NOM 11, NOM 18, NOM 28 and NOM 112 filters are designed for applications with need for larger airflow capacities, e.g. in bakeries, for machines stamp-ing and pressing steel plates, industrial washing machines, abrasive water jets, etc.. In all metal fabrication with oil mist troubles, these filters will fit into a central ducting system, con-nected to each machine. All units are equipped with pressure gauge for control of filters as well as a indication for need of cleaning (self draining). For more information, please visit www.nederman.com or contact your nearest Nederman dealer.

Low maintenance costDesigned to fit into limited workspaceSelf cleaning filterSimple installation

••••

NOM Oil Mist Filter

Model Max airflow, m³/h Main filter area, m² HEPA filter area, m² Fan Voltage, V Phase Power, kW Rated current, A Part no.

NOM 4 400 3 no yes 230 1 0.37 3.15 12610368

NOM 4 400 3 5.5 yes 230 1 0.37 3.15 12610468

NOM 4 400 3 no yes 400/230 3 0.37 1.0/1.75 12610568

NOM 4 400 3 5.5 yes 400/230 3 0.37 1.0/1.75 12610668

NOM 4 400 3 no no 12611168

NOM 4 400 3 5.5 no 12611268

NOM 11 1100 8.5 no yes 230 1 0.75 5 12620168

NOM 11 1100 8.5 16 yes 230 1 0.75 5 12620268

NOM 11 1100 8.5 no yes 400/230 3 0.75 1.73/3.0 12620568

NOM 11 1100 8.5 16 yes 400/230 3 0.75 1.73/3.0 12620668

NOM 11 1100 8.5 no no 12621168

NOM 11 1100 8.5 16 no 12621268

NOM 18 1800 14 no yes 230 1 1.1 6.7 12630168

NOM 18 1800 14 24 yes 230 1 1.1 6.7 12630268

NOM 18 1800 14 no yes 400/230 3 1.1 2.5/4.3 12630568

NOM 18 1800 14 24 yes 400/230 3 1.1 2.5/4.3 12630668

NOM 18 1800 14 no no 12631168

NOM 18 1800 14 24 no 12631268

NOM 28 2800 21 no yes 400/230 3 2.2 4.56/7.9 12640568

NOM 28 2800 21 40 yes 400/230 3 2.2 4.56/7.9 12640668

NOM 28 2800 21 no no 12641168

NOM 28 2800 21 40 no 12641268

NOM 112 10000 84 no no 12670168

NOM 112 10000 84 160 no 12670268

Motor Damper and Fan Starters - see separate sections.

43 www.nederman.com


Replacement filter For NOM 4 For NOM 11 For NOM 18 For NOM 28 For NOM 112 Part no.

Main filter, 3m² x 1 12373653

HEPA-filter, 5.5m² x 1 12373645

Main filter, 8.5m² x 1 12373654

HEPA-filter, 16m² x 1 12373646

Main filter, 14m² x 1 12373655

HEPA-filter, 24m² x 1 12373647

Main filter, 21m² x 1 x 4 12373680

HEPA-filter, 40m² x 1 x 4 12373648

Accessory For NOM 4 For NOM 11 For NOM 18 For NOM 28 For NOM 112 Part no.

Drip collector X 12373657

Machinery stand, including damper X 12373705

Wall bracket X 10504035

Pressure gauge kit, measures the pressure drop over the filter cartridges X 12373656

Silencer X 12373649

Silencer X 12373650

Container with water and oil trap, available in different designs X X X X 12373651

Hose with oil trap X X X X 12373652

Motor Damper and Fan Starters - see separate sections.

Replacement filters and Accessories NOM

44 www.nederman.com

product highres

A

B C

ØD

(mm)


The N series fan is an important component in Nederman’s wide range of quality products for fume extraction and filtering, as well as for vehicle exhaust extraction. A range of fans are available from 0.55kW to 2.2kW, both single and three phase.

Simple and powerfulAvailable with sound absorbing enclosure

••

Nederman N series Fans

Pressure drop

*) Excluding fan bracket **) Including fan bracket ***) Excluding fan bracket, can not be used without connections, max. airflow is 2500 m³/h

Fan A B C D

N10/N16 478 457 321 160

N24 478 457 341 160

N40 493 582 482 250

N29 635 643 475 160


Model Airflow, m³/h Voltage, V Frequency, Hz Phase Rated current, A Power, kW Connection Ø in / out, mm Weight, kg Part no.

N10* 400-1200 115/230 50 1 8.7/4.4 0.55 160/160 15 14521321

N10* 400-1250 230/400 50 3 2.4/1.4 0.55 160/160 13 14521621

N16* 400-1200 115/230 50 1 8.7/4.4 0.55 160/160 15 14510121

N16* 500-1250 230/400 50 3 2.4/1.4 0.55 160/160 13 14510521

N24* 400-1500 115/230 50 1 13.6/6.5 0.75 160/160 17 14510122

N24* 400-1750 230/400 50 3 3.7/2.2 0.9 160/160 17 14510422

N40* 500-4000 230/400 50 3 7.9/4.6 2.2 200/250 29 14510123

N40*** 500-2500 230/400 50 3 5.7/3.3 1.5 200/250 25 14510623

N29** 500-3000 230/400 50 3 7.9/4.6 2.2 160/160 32 14510129

N29* 500-3000 230/400 50 3 7.9/4.6 2.2 160/160 32 14510829

N29** 500-1500 230/400 50 3 5.7/3.3 1.5 160/160 28 14520129

45 www.nederman.com

product highres

A

D

B

D

H

(mm)


Nederman portable fan is a simple and powerful ventilation unit for service, repair and other temporary work. Ideal as an extractor for welding fumes, steam, dust or for providing fresh air during work in confined and enclosed spaces. A compact and easy to use fan which, in combination with inlet and outlet hoses, makes a flexible and versatile unit with a wide range of applications.

Compact and easy to useStand included, castor wheels as accessoryOn/off switch and motor protector includedSimple and powerful

••••

Portable Fans

Portable Fans

Portable Fan Kit (including fan, hoses, and nozzle)

Fan A B D H

N16 430 484 Ø160 550

N24 430 484 Ø160 550

Model * Electric connection Airflow, m³/h

Voltage, V Frequen-cy, Hz

Phase Rated current, A

Power, kW

Connection Ø in/out, mm

Weight, kg

Part no.

N16 1 CEE 7/2 P+E 230 V 500-1200 220/240 50 1 8.7/4.35 0.55 160/160 15 14511321

N16 2 CEE 17/2 P+E 100 V 500-1200 110/120 50 1 8.7/4.35 0.55 160/160 15 14511921

N16 3 CEE 17/2 P+E 230 V 500-1200 220/240 50 1 8.7/4.35 0.55 160/160 15 14512221

N24 1 CEE 7/2 P+E 230V 500-1500 220/240 50 1 11/5.5 0.75 160/160 17 14511322

N24 2 CEE 17/2 P+E 100 V 500-1500 110/120 50 1 11/5.5 0.75 160/160 17 14511922

N24 3 CEE 17/2 P+E 230 V 500-1500 220/240 50 1 11/5.5 0.75 160/160 17 14512222

Model * Electric con-nection

Voltage, V Frequency, Hz

Phase Rated current,

A

Power, kW

Airflow, m³/h

Connection Ø in/out,

mm

Weight, kg

Suction hose, m x

mm

Exhaust hose, m x

mm

Part no.

N16 System

1 CEE 7/2 P+E 230 V

220/240 50 1 8.7/4.35 0.55 500-1200

160/160 15 5 x 100 5 x 160 14230090

N16 System

3 CEE 17/2 P+E 230 V

220/240 50 1 8.7/4.35 0.55 500-1200

160/160 15 5 x 100 5 x 160 14230590

N16 System

1 CEE 7/2 P+E 230 V

220/240 50 1 11/5.5 0.75 500-1500

160/160 17 5 x 100 5 x 160 14230100

N24 System

3 CEE 17/2 P+E 230 V

220/240 50 1 11/5.5 0.75 500-1500

160/160 17 5 x 100 5 x 160 14230600

1 2 3 * Electric connection

46 www.nederman.com


Fan Manual StarterA series of Fan Starters suitable for N-Series, smaller NCF-Series Fans and NOM Filters.

Model Rated current, A 1 phase 1 phase 3 phase 3 phase Part no.

110V 230V 230V 400V

FMS 1-1.6 1-1.6 N10, N16, NOM4 14502137

FMS 1.6 - 2.5 1.6 - 2.5 N10, N16, NOM4 N24, NOM11, NOM18 14502237

FMS 2.5 - 4 2.5 - 4 NOM4 N24, NOM11 N29/N40 - 1.5kW 14502337

FMS 4 - 6.3 4 - 6.3 NOM4 N10, N16, NOM11 N29/N40 - 1.5kW, NOM18 N29/N40 - 2.2kW, NCF30/15, NOM 28 14502437

FMS 6.3 - 10 6.3 - 10 N10, N16, NOM11 N24, NOM18 N29/N40 - 2.2kW, NCF30/15, NOM28

NCF30/25 14502537

FMS 10 - 16 10 - 16 N24, NOM18 NCF30/25 (NCF40/25) 14502637

FMS 14.5 - 19 14.5 - 19 14503037

FMS 18 - 25 18 - 25 14503137

Accessory Voltage, V Frequency, Hz Part no.

Undervoltage trip 220 / 230 50 14373715

Undervoltage trip 380 / 400 50 14373717

Fan ContactorTo start/stop a central fan in combination with a number of Mo-tor Dampers. (Larger capacity fans may be remote controlled via a Nederman Fan Starter or Fan Inverter.) The Fan Contactor has a fan motor protection included. Protection class IP66. Coil 24V AC, from Operation Box or transformer.

Model Rated current, A Phase 110V 230V 400V Part no.

FC 3/1 - 2.9 1 - 2.9 3 N10, N16 N10, N16, N24 14514037

FC 3/1.6 - 5 1.6 - 5 3 N24 N24 14512937

FCA 3/3.7 - 9 3.7 - 9 3 N40 N29 2.2 kW, N40 2.2 kW, NCF30/15, NCF30/25 14513337

FCA 1/2 - 7 2 - 7 1 N10, N16, N24 14513837

FCA 1/5 - 12 5 - 12 1 N10, N16 14513937

Lockable on/off switchMotor overload protector includedBoth for single and three phase fansUnder voltage release available

••••

47 www.nederman.com

product highres


Transformers

Description Input voltage, V Input frequency, Hz Input phase Output No. of light kits Part no

1 Power supply to spotlight kits 24V 230/250 50/60 1 24V 35VA 1x20W 10363189

2 Power supply to spotlight kits 24V 230/250 50/60 1 24V 75VA 3x20W 10361560

Fan Controls

Manual

Automatic

Less heated air is extracted to outside, and less electricity consumed if the fan operates only while the work is in progress. Switch on/off the fan manually at the hood, or automatically with a sensor clamp. Single phase power supply of the Operation Box. The automatic Fan Control has a sensor clamp to be attached on the ground cable of the welding set for automatic start of the fan. It is able to detect currents from 8A. The Opera-tion Box consists of a transformer 30VA for the light kit in the extraction arm, a timer for delay of fan stop variable 0-5 minutes, and two separate connections for sensor clamps.

Accessory Part no.

Sensor clamp. One additional sensor clamp can be connected to the operation box. Used when using two different welding machines in the same area. 14372199


FCM 3/1 - 2.9 1 - 2.9 3 N10, N16 N10, N16, N24 14514337

FCM 3/1.6 - 5 1.6 - 5 3 N24 N24, N29, N40, NCF 30/15 14512837

FCM 3/3.7 - 9 3.7 - 9 3 N40 N29 2.2 kW, N40 2.2 kW, NCF 30/15, NCF 30/25 14513237

FCM 1/2 - 7 2 - 7 1 N10, N16, N24 14514437

FCM 1/5 - 12 5 - 12 1 N10, N16, N24 14513637


FCM 3/1 - 2.9 1 - 2.9 3 N10, N16 N10, N16, N24 14514137

FCM 3/1.6 - 5 1.6 - 5 3 N24 N24, N29, N40, NCF 30/15 14512737

FCM 3/3.7 - 9 3.7 - 9 3 N40 N29 2.2 kW, N40 2.2 kW, NCF30/15, NCF30/25 14513137

FCM 1/2 - 7 2 - 7 1 N10, N16, N24 14514237

FCM 1/5 - 12 5 - 12 1 N10, N16, N24 14513537

1 2

48 www.nederman.com


Motor DamperReduces energy costs and increases efficiency. Provides optimum airflow within a multi-arm system, with the possibility of using a smaller fan and automatic start/stop. The motorised damper is available in two models. Manual, using a hood mounted switch set, or automatic, using a sen-sor clamp for welding. The closing can be delayed. Single phase power supply of the Operation Box, 110/120-220/240V, 50/60Hz. Full technical details available upon request. The Motor Damper Automatic has a sensor clamp to be attached on the ground cable of the welding set for automatic start of the fan and automatic control of the damper. The Operation Box consists of a transformer 30VA for the light kit in the extraction arm, a timer for delay of fan stop variable 0-5 minutes, two separate connections for sensor clamps.

Consists of a fan contactor and an Operation BoxThe Operation Box can be controlled by any closing contact from other processesConnect the Motor Damper to a Fan Control to start the fan

••

•

Automatic

ManualModel Ø, mm Part no.

MDM 125 125 14500191

MDM 160 160 14500291

MDM 200 200 14500391

Model Ø, mm Part no.

MDA 125 125 14500491

MDA 160 160 14500591

MDA 200 200 14500691

Accessory Part no.

Sensor clamp. One additional sensor clamp can be connected to the operation box. Used when using two different welding machines in the same area.

14372199

49 www.nederman.com


Accessories for Fans


1 Adaptor Ø125/Ø100 mm 14341077

1 Adaptor Ø125/Ø75 mm 14341080

1 Adaptor int. Ø160/ext. Ø75 mm 14510426



1 Adaptor Ø150/Ø125 mm 14511126

1 Adaptor Ø160/Ø150 mm 14511226

2 Inlet adaptor for hose Ø160 mm for fan N10/N16/N24 14510326

3 Inlet adaptor for hose Ø160 mm and two guard nets for fan N10/N16/N24 14322166

4 Guard net, 1 pc, for fan N10/N16/N24 14333181

5 Hose. L = 5 m. Ø100 mm. PVC. Black. 10500427




6 Jointing tube 3”-3” (75 mm) 14503626

6 Jointing tube 4”-4” (100 mm) 14504626

6 Jointing tube 5”-5” (125 mm) 14505626

6 Jointing tube 6”-6” (150 mm) 14506626

6 Jointing tube Ø160-Ø160 mm 14511326

7 Nozzle with magnet. 250 x 30 mm. Aluminium. Ø100 mm. 14500226

8 Nozzle with magnet. 260 x 100 mm. Polycarbonate. Ø100 mm. 14501226

9 Silencer for fan when mounting on Original/Telescopic 14502126

9 Silencer including quick release (for fan mounting on Filterbox) 14502226

10 Wallbracket for silencer 14343089

11 Split intake Ø125 int./2 x Ø100 mm ext. 14500526





11 Split intake Ø160 int./2 x Ø75mm ext. 14510926

12 Support bracket for N10/N16/N24 for fixed mounting 14510126

12 Support bracket for N40 for fixed mounting 14510226

12 Support bracket for portable N16/N24 fan 14511426

12 Support bracket for fan N29 14321745

13 Wheel set for portable N16 or N24 fan 14371707

1 2 3 4 5 6 7

8 9 10 11 12 13

50 www.nederman.com


Bench Top Extraction ArmsThe Nederman BenchTop arms can be used in every type of environment, ranging from assembly stations, where solder fumes are extracted, to laboratories, where protection against highly corrosive or noxious gases is vital. For more informa-tion on each product: see following pages.

Connection direction*

Arm Ø, mm Length, mm Part no.

Down 32 850 70502834

Up/down 50 700 70510144

Down 50 1100 70510244

Down 50 1500 70510444

Up 50 1100 70510344

Up 50 1500 70510544

Down 75 1100 70540144

Down 75 1500 70540344

Up 75 1100 70540244

Up 75 1500 70540444

Up/down 100 1200 70570144

Down 100 1800 70570244

Up 100 1800 70570344

Up 100 2400 70570544



Down 32 850 70502934

Up/down 50 700 70530144

Down 50 1100 70530244

Down 50 1500 70530444

Up 50 1100 70530344

Up 50 1500 70530544

Down 75 1100 70560144

Down 75 1500 70560344

Up 75 1100 70560244

Up 75 1500 70560444

Up/down 100 1200 70590144

Down 100 1800 70590244

Up 100 1800 70590344

Up 100 2400 70590544



Down 75 1100 70550144

Down 75 1500 70550344

Up 75 1100 70550244

Up 75 1500 70550444

Up/down 100 1200 70580144

Down 100 1800 70580244

Up 100 1800 70580344

Up 100 2400 70580544

* Note: Different spring mechanisms are fitted depending on connection direction

* Note: Different spring mechanisms are fitted depending on connection direction

* Note: Different spring mechanisms are fitted depending on connection directionConnection up

Connection down

ORIGINAL CHEM

Original

ESD

CHEM

ESD

FX50 FX75 FX100FX32

51 www.nederman.com


Guide to Bench Top Extraction Kits

Extractor kit Voltage, V / Electrical plug ORIGINAL Part no.

500 220-240 / EUR 70510634

500 220-240 / UK 70510734

1000 220-240 / EUR 70511134

1000 220-240 / UK 70511234

1500 220-240 / EUR 70511634

1500 220-240 / UK 70511734

2000 240 / EUR 70505044

2000 240 / UK 70505144

2500 240 / EUR 70505644

2500 240 / UK 70505744

3000 240 / EUR 70506244

3000 240 / UK 70506344

Extractor kit Voltage, V / Electrical plug ESD Part no.

500 220-240 / EUR 70510639

500 220-240 / UK 70510739

1000 220-240 / EUR 70511139

1000 220-240 / UK 70511239

1500 220-240 / EUR 70511639

1500 220-240 / UK 70511739

2000 240 / EUR 70505344

2000 240 / UK 70505444

2500 240 / EUR 70505944

2500 240 / UK 70506044

3000 240 / EUR 70506544

3000 240 / UK 70506644

Extraction Kit Original 500 Extraction Kit Original 1000 Extraction Kit Original 1500

Extraction Kit Original 2000 Extraction Kit Original 2500 Extraction Kit Original 3000

Original

ESD

52 www.nederman.com


Equipped with a damper close to the extraction openingModel for bench mounting (connection down) or wall/ceiling mounting (connection up) available.Also available in an ESD version, electrically conductive, for electronic applications

••

•

A unique flexible plastic hose, self-supporting without joints, for work-places with limited space. For extraction of fumes, etc. when soldering, gluing, or working with solvents. Can be connected in single applications, in systems, and with or without filter. Easily mounted to a workbench or similar. Can be mounted standing, hanging or attached to the wall. Flex-ible in all directions and simple to position. Easy to dismantle for easy cleaning.

Made of light-weight anodized aluminium sections, with two or three adjustable, plastic friction joints. For extraction of fumes, etc. when soldering, gluing, or working with solvents. Can be connected in single applications, in systems, and with or without filter. Easily mounted to a workbench or similar. Can be mounted standing, hanging or attached to the wall. Flexible in all directions and simple to position. Easy to disman-tle for easy cleaning.

The arm is equipped with a damper close to the swivelAlso available in an ESD version, electrically conductive, for electronic applications

••

Capacity, m³/h 20-60

Arm Ø, mm 32

Arm length, mm 1000


Arm Ø, mm 50

Arm length two joints, mm 700

Arm length three joints, mm 1100 and1500

Temperature extracted air, °C -10 to +70

FX Extraction Arm 32



53 www.nederman.com



Equipped with a damper close to the extraction openingModel for bench mounting (connection down) or wall/ceiling mounting (connection up) availableAlso available in an ESD version, electrically conductive, for electronic applicationsAlso available in a CHEM version, for chemical applications

••

•

•

FX Extraction Arm 100Made of light-weight anodized aluminium sections with two or three adjustable plastic friction joints. For extraction of fumes, etc. when soldering, gluing, or working with solvents. Can be connected in single applications, in systems, and with or without filter. Easily mounted to a workbench or similar. Can be mounted standing, hanging or attached to the wall. Flexible in all directions and simple to position. Easy to disman-tle for easy cleaning.

Equipped with a damper close to the extraction openingModel for bench mounting (conn. down) or wall/ceiling mounting (conn. up) available.Also available in an ESD version, electrically conductive, for electronic applicationsAvailable in a CHEM version, for chemical applications

••

•

•

Made of light-weight anodized aluminium sections, with two or three adjustable plastic friction joints. For extraction of fumes, etc. when soldering, gluing, or working with solvents. Can be connected in single applications, in systems, and with or without filter. Easily mounted to a workbench or similar. Can be mounted standing, hanging or attached to the wall. Flexible in all directions and simple to position. Easy to disman-tle for easy cleaning.


Arm Ø, mm 75

Arm length three joints, mm 1100 and1500



Arm Ø, mm 100

Arm length three joints, mm 1200, 1800 and 2400



54 www.nederman.com


Extraction Kit Original 500Designed for one smaller workplace, where the demand for airflow is up to 30m³/h per arm. The kit consists of an extraction arm FX 32 with table bracket and a CX 5500 filter and fan unit. (For more information see separate product section.) One speed on/off. Complete with hose and extraction hood. The hood is made of clear plastic, which increases the visibility (not the ESD hood). Also available in an ESD version for the electronics industry.

Extraction Kit Original 1000Designed for two smaller workplaces for simultaneous use, where the demand for airflow is up to 42m³/h per arm. The kit consists of two extraction arms FX 32 with table brackets, filter unit and fan N3. (For more informa-tion see separate product section.) The speed of the fan is variably control-led by a speed controller. Complete with hoses and extraction hoods. The hood is made of clear plastic, which increases the visibility (not the ESD hood). Also available in an ESD ver-sion for the electronics industry.

Airflow, m³/h 30

Frequency, Hz 50/60

Power, W 80

Arm Ø, mm 32

Arm length, mm 850

Hose Ø, mm 32

Hose length, m 1.5

Weight filter and fan, kg 8.6

Airflow, m³/h 42

Frequency, Hz 50/60

Power, W 170

Arm Ø, mm 32

Arm length, mm 850

Hose Ø, mm 45

Hose length, m 3.0


Extraction Kit Original 1500Designed for three smaller work-places for simultaneous use, where the demand for airflow is up to 38m³/h per arm. The kit consists of three extrac-tion arms FX 32 with table brackets, filter unit and fan N3 (for more infor-mation see separate product sections). The speed of the fan is variably controlled by a speed controller. Com-plete with hoses and extraction hoods. The hood is made of clear plastic, which increases the visibility (not the ESD hood). Also available in an ESD version for the electronics industry.

Airflow, m³/h 38

Frequency, Hz 50/60

Power, W 170

Arm Ø, mm 32

Arm length, mm 850

Hose Ø, mm 45

Hose length, m 3.0


55 www.nederman.com


Extraction Kit Original 2000Designed for one workplace, where the demand for airflow is up to 100m³/h. The kit consists of a FX 50 with swivel, table bracket, filter unit and fan N3 (for more information see separate product sections). The speed of the fan is variably controlled by a speed controller. Complete with hose and combination hood. The hood is made of clear plastic, which increases the visibility (not the ESD hood). Also available in an ESD version for the electronics industry.

Airflow, m³/h 100

Frequency, Hz 50/60

Power, W 170

Arm Ø, mm 50

Arm length, mm 1100

Hose Ø, mm 75

Hose length, m 3.0


Extraction Kit Original 2500Designed for two workplaces, where the demand for airflow is up to 75m³/ h per arm. The kit consists of two ex-traction arms FX 50 with swivel, table brackets, filter unit and fan N3 (for more information see separate product sections). The speed of the fan is vari-ably controlled by a speed controller. Complete with hoses and extraction nozzles. Also available in an ESD ver-sion for the electronics industry.

Airflow, m³/h 75

Frequency, Hz 50/60

Power, W 170

Arm Ø, mm 50

Arm length, mm 1100

Hose Ø, mm 75

Hose length, m 3.0


Extraction Kit Original 3000Designed for one workplace, where the demand for airflow is up to 150m³/h. The kit consists of an extraction arm FX 75 with swivel, table bracket, filter unit and fan N3 (for more information see separate product sections). The speed of the fan is variably control-led by a speed controller. Complete with hose and extraction nozzle. Also available in an ESD version for the electronics industry.

Airflow, m³/h 150

Frequency, Hz 50/60

Power, W 170

Arm Ø, mm 75

Arm length, mm 1100

Hose Ø, mm 100

Hose length, m 3.0


56 www.nederman.com


The product consists of a filter with an integrated fan delivered with a connection hose. It is designed for extraction and filtration of noxious fumes and vapours from a single work place. For instance when soldering, gluing or working with solvents. It is intended to be used in combination with one FX Extraction Arm 32 or the Down Flow Grille FD 23. The unit is ESD certified as standard. This means that it is electrically conductive for electronic applications.

Easy to installThe unit is compact and virtually silentThe filter consists of particle, HEPA and gas filterThe filter cartridges are disposable and easy to change

••••


Filter unit CX 5500, 220-240V, ESD, EUR-plug 70503149

Filter unit CX 5500, 220-240V, ESD, UK-plug 70503249

Airflow, m³/h 30

Filtration degree at 0.3 um DOP, % 99.97

Gas adsorption media, kg 1.35

Voltage, V 220-240

Frequency, Hz 50/60

Power, W 85

Connection Ø, mm 32

Connection hose length, m 1.5


Filter Ø, mm 255

Filter height, mm 400

Weight, kg 8.6


Filter, particle / gas 70371596

Filter, micro 70371503

CX 5500 Filter and Fan Unit

57 www.nederman.com


N3 Fan and Filter CartridgeThe product consists of a separate filter cartridge and a N3 fan connected together. It is designed for extraction and filtration of noxious fumes and vapours for the smaller workplace, for instance when soldering, gluing or working with solvents. It is intended to be used in different combinations with the FX arms or the Down Flow Grille FD 23.

Easy to installThe filter cartridge consists of particle, HEPA and gas filterThe filter cartridge is disposable and easy to changeGas only filter available with larger amount of adsorption media, than the standard cartridgeIt is possible to combine two filters on top of each other with an adapterThe speed of the fan is variably controlled by a speed controller, thyris-torTogether with a ESD silencer box, the unit is ESD certified, which makes it electrically conductive for electronic applications.

••••

••

•

Filter Fan Assembled unit

Airflow, m³/h 300


Particle filter area, m2 2.5


Voltage, V 220-240

Frequency, Hz 50/60

Phase 1

Power, W 170

Connection Ø, mm 125


Length, mm 388 320

Width, mm 288 140

Height, mm 285 270 555

Weight, kg 3.8 4.6 8.4

Accessory Part no.

Silencer/ESD Box for EK’s 1000-3000 70311429

Adapter for connecting two EK filter cartridges 1000-3000 70332904


Fan 0.17KW, with speed control, EUR-plug 70800134

Fan 0.17KW, with speed control, UK-plug 70800234

Filter - standard for EK 1000-3000 70311427

Filter - gas for EK 1000-3000 70312427

58 www.nederman.com


TX 2000 ESD Soldering FilterCompressed air driven filter unit for extraction of soldering fumes. De-signed for one or two soldering irons equipped with integrated tip extrac-tion. The unit consists of a filter and a venturi device regulated by a valve.

Easy to installThe unit is compact and virtually silentThe filter consists of particle and gas filterThe filter cartridge is disposable and easy to changeThe unit requires a compressed air supplyThe airflow is easily set by the reducing valveThe unit is ESD certified as standard. This means that it is electrically conductive for electronic applications

•••••••


Filter unit TX 2000 ESD 70500449

Airflow, m³/h 30


Particle filter area, m2 0.9


Compressed air consumtion approx., l/min 40-60

Working pressure, bar 3-8

Connection Ø, mm 4-6


Filter Ø, mm 210

Filter height, mm 280

Weight, kg 1.8


Clip-on kit micro, ESD 70371501

Clip-on kit universal, ESD 70371502

Kit for connecting two soldering irons 70371516

Filter cartridge for TX 2000, ESD 70371529

59 www.nederman.com


Down Flow Grille FD 23An extraction device designed to be integrated directly in the bench top surface. It is highly effective in capturing the heavy fumes from gluing, solvents and similar. Typical workplaces are schools, laboratories, elec-tronic and medical industries. Recommended to use together with fan/fil-ter CX 5500, or fan N3 with filter. Made of stainless steel which resists many common chemical substances. Can easily be used in combination with an extraction hood for increased extraction capacity. Grille Ø 260 mm. Connection Ø 45 mm.

Does not interfere with other equipment in your workplaceEasy to dismantle for internal cleaningPerforated suction area with pre filterVirtually silent when connected to a CX 5500

••••


Down Flow Grille FD 23 70373527

Accessory Part no.

Reduction 45/32 mm 70373605

60 www.nederman.com

x 2


Accessories for Bench Top Extraction

ESD

Original

CHEM

Description Fits FX Arm Size, mm Part no.

1 Table bracket 32 70371761

2 Wall bracket 32 70371760

3 Bracket complete 50 / 75 / 100 L=250 70501144

4 Bracket 50 / 75 / 100 70501244

5 Extension profile 50 / 75 / 100 L=1100 70501344

6 Table bracket 50 / 75 / 100 70501444

Cover ring, ceiling 50 / 75 Ø 130, T=3 70502644


1 Table bracket 32 70371761

2 Wall bracket 32 70371760


4 Bracket 50 / 75 / 100 70501244


6 Table bracket 50 / 75 / 100 70501444




4 Bracket 50 / 75 / 100 70501244


6 Table bracket 50 / 75 / 100 70501444


Extraction Arms

1 2 3 4 5 6

3 4 5

6

61 www.nederman.com


ReducersHoods

ESD

Original

CHEM

ESD

Original

CHEM

Fits FX Arm Size, mm Part no.

1 Flange hood 32 150x160 70371525

2 Dome hood 1/2 32 260x120 70371756

3 Dome hood 1/1 32 Ø 260 70371757

4 Metal hood 50 / 75 / 100 Ø 280 70500444

5 Combination hood 50 / 75 / 100 380x460 70500144


2 Dome hood 1/2 32 260x120 70371807

3 Dome hood 1/1 32 Ø 260 70371808

4 Metal hood 50 / 75 / 100 Ø 280 70500544



4 Metal hood 50 / 75 / 100 Ø 280 70500444


Fits FX Arm Ø, mm Part no.

1 50 / 75 / 100 63 70500644

2 50 / 75 / 100 75-80 70500744

3 50 / 75 / 100 100 70500844

4 50 / 75 / 100 125 70500944

Fits FX Arm Ø, mm Part No.

1 50 / 75 / 100 63 70500644

2 50 / 75 / 100 75-80 70500744

3 50 / 75 / 100 100 70500844

4 50 / 75 / 100 125 70500944

Fits FX Arm Ø, mm Part no.

1 50 / 75 / 100 63 70500644

2 50 / 75 / 100 75-80 70500744

3 50 / 75 / 100 100 70500844

4 50 / 75 / 100 125 70500944

Hoses

OriginalDescription Ø, mm Length, mm Part no.

Hose (black) 32 1500 70400052

Hose (white) 45 3000 70501644

Hose (grey) 75 3000 70501544

Hose (grey) 100 3000 70501744

Hose (grey) 125 5000 70501844

Description Ø, mm Length, mm Part no.

Hose ESD (black) 45 3000 70502044

Hose ESD (black) 75 3000 70501944

Hose ESD (black) 100 3000 70502144

Hose ESD (black) 125 3000 70502244

ESD

1 2 3 4 5 1 2 3 4

62 www.nederman.com

Nederman Norclean Line Product Catalogue

V a c u u m c l e a n i n g s y s t e m s

V a c u u m t r a n s p o r t a t i o n s y s t e m s

V a c u u m S o l u t i o n s

Nederman Norclean LineVacuum systems for tough applications

Air powered vacuum systems

Electric vacuum systems

Powder Dust Grit Granulate Chips Liquids Misc

Ab105 x x x

Ab216 x x x x x x

Ab426 x x x x x x

Ab500 x x x x x

Ab722 x x

Ab105 Ex x x x x

Ab216 Ex x x x x x x

Ab500Ex x x x x x

Bb114 x x x x

Bb181 x

Bb216 x x x x x x

Bb306 x x x x

Bb680 x x x x x x

Nederman Norclean Line is our special product range for collecting and transporting dry or wet materials, slurries and liquids. The systems are available with pneumatic ejectors or electric power heads.

The ATEX approved Norclean Line range are all made of conductive and antistatic material, to comply with the ATEX directive 94/9/EC for equipment category 2 and 3. The ATEX range can be used in explosion hazardous gas zone 1 and 2, and in dust zone 21 and 22.

The Nederman Norclean Line is presented in a separate catalogue. Also see www.nederman.com

Ab105 / Ab105Ex Ab216 / Ab216Ex Ab500 / Ab500Ex Ab722

Bb114 Bb181 Bb216 Bb306 Bb680

Ab426

63 www.nederman.com


Nederman P160 are light weight vacuum units ideal for indus-trial floor cleaning and on-tool extraction for small grinders and sanders.

Portable High Vacuum Unit P160Easy to handlePowerful single phase motorHigh filtration efficiencyLong filter lifetime (4-6000 hours) with bag filtersLight weightLow operating and maintenance costsMicro filter as option

•••••••

P160 B P160 I

The fine filter cartridge will take care of fine dust from cleaning and on-tool ap-plications.

The textile bag filters are easy to clean. Add a microfilter (optional) for the finest particles.

Voltage, V Part no.

230 - EUR 40054700

230 - DK 40054710

230 - UK 40054720

110 - UK 40054730

Voltage, V Part no.

230 - EUR 40055000

230 - DK 40055010

230 - UK 40055020

110 - UK 40055030


P160 B P160 I

Voltage, V 110/230 (single phase) 110/230 (single phase)

Motor power. max., W 1200 1200

Maximum flow, m³/h 160 160

Max vacuum, kPa 22 22

Noise level (ISO 11201), dB(A) 75 75

Built-in float No No

Wheel type Rubber and castor wheels Plastic and castor wheels

Cleaning equipment CE370 CE370 P

Auto start/stop For electrical tools For electrical tools

Compressed air connection No No

Dust bin volume, l 21/14 21/14

Weight, kg 19.5 19.5

Height/Width/Depth, mm 1160/430/480 1160/430/480

Filter indicator Yes No

Casing Steel Steel

IP class 24 24

Filter Fine filter cartridge Textile bag filters

Bag solution Plastic Plastic

64 www.nederman.com


Portable High Vacuum Unit P300Convenient accessory box for brushes, nozzles etc, on the rear of the unitMicro filter as optionAdjustable handle

•

••

P300 B P300 I

A powerful unit that is easy to transport and has a filter sensor indicating the need for cleaning of the filters.

For industrial use. The textile filters are easy to clean and have a long life-time (4-6000 hours).

Voltage, V Part no.

230 - EUR 40055100

230 - DK 40055110

230 - UK 40055120

110 - UK 40055130

Voltage, V Part no.

230 - EUR 40055400

230 - DK 40055410

230 - UK 40055420

110 - UK 40055430


Optimal suction power – twin single phase motorsRobust but easy to transportHigh filtration efficiencyLong filter lifetime (4-6000 hours) with bag filtersErgonomic trolley with adjustable handle

•••••

P300 B P300 I

Voltage, V 110/230 (single phase) 110/230 (single phase)

Motor power. max., W 2 x 1200 2 x 1200






Cleaning equipment CE500 CE370P

Auto start/stop For electrical tools For electrical/pneumatic tools

Compressed air connection No Yes


Weight, kg 36 36



Casing Steel Steel

IP class 24 24



65 www.nederman.com


These three phase units are efficient, economical and easy to handle. They are very easy to dismantle and clean. The loca-tion of the (optional) micro filter prevents contamination of the pump. The forward/reverse switch saves time when moving between work sites with different phase sequence.

Portable High Vacuum Unit P30Easy to handleHigh filtration efficiencyLong filter lifetime (4-6000 hours) with bag filtersLow noise levelLong motor lifetimeMicro filter as option

••••••

P30 B P30 I P30 IXL

Designed for professional handling of hazardous dust. A powerful side chan-nel fan gives an outstanding extraction capacity.

The textile filtes are easy to clean and have a life-time of 6-8000 hours. With a microfilter (optional) the unit will filtrate very fine particles.

Extra large dustbin with handle and wheels. The dustbin is equipped with a drain outlet for easy emptying of fluids.

Voltage, V Part no.

400 40055500

230 40055510

Voltage, V Part no.

400 40055800

230 40055810

Voltage, V Part no.

400 40055700

230 40055710


P30 B P30 I P30 IXL

Voltage, V 230/400 ( 3-phase) 230/400 ( 3-phase) 230/400 ( 3-phase)

Motor power. max., W 3000 3000 3000

Maximum flow, m³/h 240 240 240

Max vacuum, kPa 30 30 30

Noise level (ISO 11201), dB(A) 71 71 71

Built-in float No No No

Wheel type Rubber and castor wheels Plastic and castor wheels Plastic and castor wheels

Cleaning equipment CE500 CE450 CE50 SN

Auto start/stop Optional (PAS30) Optional (PAS30) Optional (PAS30)

Compressed air connection No No No

Dust bin volume, l 35/25 35/25 50/42

Weight, kg 74 74 76

Height/Width/Depth, mm 1230/700/880 1130/650/980 1130/650/980

Filter indicator Yes No No

Casing Steel Steel Steel

IP class 55 55 55

Filter Fine filter cartridge Textile bag filters Coarse filter

Bag solution Plastic Plastic Plastic

66 www.nederman.com


These three phase units are efficient, economical and easy to handle. They are very easy to dismantle and clean. The loca-tion of the (optional) micro filter prevents contamination of the pump. The forward/reverse switch saves time when moving between work sites with different phase sequence.

Portable High Vacuum Unit P55Easy to handleHigh filtration efficiencyLong filter lifetime (4-6000 hours) with bag filtersLow noise levelLong motor lifetimeMicro filter as option

••••••

P55 B P55 I

The most powerful unit in our range. Equipped with a 5.5 kW side channel fan.

Dust extraction by three stage separation cyclone, bag type fine filters and micro filter (optional).

Voltage, V Part no.

400 40055900

230 40055910

Voltage, V Part no.

400 40056000

230 40056010


P55 B P55 I

Voltage, V 230/400 ( 3-phase) 230/400 ( 3-phase)

Motor power. max., W 5500 5500






Cleaning equipment CE500 CE500

Auto start/stop No No

Compressed air connection No No


Weight, kg 101 101



Casing Steel Steel

IP class 55 55



67 www.nederman.com


Blasting is an effective way to remove corrosion, old paint, etc. from all kinds of surfaces. With the Nederman Suction Blaster the surface will be clean and perfect for painting etc. The different ac-cessories/nozzles (see end of chapter) make the process closed and dust free.

Suction Blaster 750

Lower costs for blasting material when it is recycledBuilt in filter for less airborne dustThe closed blasting process does not interfere with other activi-ties in your workshopDust-free blasting means lower costs for workshop cleaning

•••

•

Voltage, V Part no.

230 - EUR 70750070

230 - UK 70750073

Portable Pre-separator FA7

Portable pre-separator, used to separate abrasive or larger objects and also water and cutting fluids. Pre-separator with cyclone inlet and large rubber wheels. Available with 70 or 30 litre bin.

Dustbin volume, l Capacity, m³/h Part no.

30 400 40110100

70 400 40110140


68 www.nederman.com


Compact design – easy to installLow installation costsLow running and maintenance costsWide range of applicationsLow noise levelIntegrated PLC

••••••

The Nederman L-PAK kit offers a very flexible solution for removing dust and fumes in all types of industries. Due to its smart and compact design this stationary high vacuum unit can easily be installed even in a small workshop. Two stage separation filter. Automatic filter cleaning by reversed air pulse.

L-PAK unit including bends, pipe couplers, compressed air filter and junc-tion box, etc.

Stationary High Vacuum Unit L-PAK

L-PAK kits

Installation kits

L-PAK unit Connection Ø, mm Voltage, V Part no.

L-PAK 150 63 400 40056360

L-PAK 150 63 230 40056370

L-PAK 250 100 400 40056310

L-PAK 250 100 230 40056320

Installation Kit Connection Ø, mm Part no.

TAV 50 FV 100 40060640

TAV 50 FV 63 40060710

TAV 50 MA 100 40060680

TAV 50 MA 63 40060720

KV 50 CL 100 40060630

KV 50 CL 63 40060750

Piping accessories 100 40060660

Piping accessories 63 40060730

Pipe 6 m 100 40130390

Pipe 6 m 63 40130430


69 www.nederman.com


Dust Extraction KitsA range of dust extraction kits are available to fit more than six hundred tools, and the system is suited to most sanding, grinding and cutting jobs. The kits can be attached to both electric and pneumatic tools. Below you can see some examples. For more details regarding tools or applications, please visit www.nederman.com!

Dust Extraction Kits for sandersThe fixed aluminium manifold is available in many models to fit differ-ent tools. A durable polyurethane hood snaps into the fixed manifold. The hood is available with or without brush for Ø 125, 150 and 180 mm. (5” - 6” - 7”).

The kit consists of three main parts, an aluminium manifold, a wheel guard and a snap-in plastic hood. There are a large number of manifolds machined to fit different tool makes and models. The wheel guard and the snap-in hood are available for Ø125 mm (5”) and Ø180 mm (7”) grinding wheels.

Dust Extraction Kits for grinders

1) Snap in hood without brush, 125 mm disc. 2) Snap in hood with brush, 125 mm disc. 3) Snap in hood with brush, 150 mm disc. 4) Snap in hood without brush, 180 mm disc. 5) Snap in hood with brush, 180 mm disc.

1) Polyurethane snap-in hood. 2) Dust flow. 3) Rotating disc. 4) Fixed aluminium manifold.

70 www.nederman.com


Filters for Portable High Vacuum Units

Nozzle type Description Part no

1 Nozzle for spot areas. 70579960

2 Nozzle for edges. 70579963

3 Brush nozzle (included in Suction Blaster 750) 70101402

4 Nozzle for interior corners. 70579961

5 Nozzle for exterior corners. 70579962

Filters P160 P300 P30 P55 Part no.

Bag filter pack polypropylene X 40114250

Cartridge filter X 40114130

Micro filter cartridge X 40114100







Cartridge filter X X X 40114140

Textile filter bag X X X 40119990

Plastic bin liner X 40110870

Plastic bin liner X X X 40115011

Accessories for High Vacuum Extraction

Nozzles for suction blaster

1 2 3 4 5

1 2 3 4 5

71 www.nederman.com


Welding Nozzle CWN-S with silencer

Welding Nozzle FWN-S, fish tail

Welding Nozzle SWN, slotted

Circular welding nozzle in coated aluminium with integrated silencer. Noise reduction compared to standard nozzles 9 dB (A). Suitable for mounting to balance arms, magnet or suction base.

General purpose nozzle suitable for mounting to balance arms, magnet or suction base. Must be combined with nozzle extension when used with balance arm.

General purpose nozzle suitable for mounting to magnet or suction base. Must be combined with nozzle extension when used with balance arm.

Welding Nozzle Accessories

Model Nozzle width, mm Connection Ø, mm Part no.

FWN 200/50 200 50 40290110

FWN 400/50 400 50 40290120

Model Nozzle width, mm Connection Ø, mm Part no.

SWN 300/50 300 50 40290130

SWN 500/50 500 50 40290140

Model Nozzle diameter Ø, mm Connection Ø, mm Part no.

1 CWN-S 105/40 105 40 40290330

1 CWN-S 105/50 105 50 40290230

1 CWN-S 105/63 105 63 40290240

2 CWN-S 105/50L, with flexible steel tube extension. 105 50 40290270


1 Magnetic base suitable for all nozzles. Diameter 100 mm 40290170

2 Nozzle extension. Used to extend the nozzle upwards. Fits all welding nozzles. NB! Must be used on FWN and SWN nozzles if fitted to balance arms. Height: 100 mm

40290200

3 Suction base suitable for all nozzles when working with non-magnetic materials. Diameter 115 mm 40290180

4 Handle CWN-S. To be fitted between extraction nozzle and balance arm. 40070420

21

1 2 3 4

72 www.nederman.com


Floor cleaning sets

Complete set for floor cleaning equipment including heavy duty wheel suspended floor nozzle made from aluminium and chrome steel pipe. The nozzle is delivered with replaceable rubber rims and can also be equipped with bristles. Hose couplers are included.

Model Description Part no.

CE50 SN For metal chips extraction 40196390

CE370 Cleaning equipment, 370 mm, Ø 40 mm 40191130



CE370 P Cleaning equipment, 370 mm, Ø 40 mm, plastic floor nozzle 40191230


1 Pipe brush for ø 200 mm pipes, 40 mm male coupler section. 40195920

2 Pipe brush for ø 100 mm pipes, 40 mm male coupler section. 40195930

3 Plastic crevice nozzle with notches, 40 mm male coupler section. 135 x 40 mm. 40193660

4 Plastic crevice nozzle, 40 mm male coupler section. 100 x 15 mm. 40193600

5 Circular crevice nozzle in plastic. Inlet can be cut to ø 20 - 35 mm, 40 mm male coupler section. 40193570

6 Elongated brush, 40 mm male coupler section. 169 x 54 mm. 40190020

7 Round rubber brush with swivel top, 40 mm male coupler section. 40193080

Bristles for 40193080 standard. 40195250

Bristles for 40193080 blue, food industry. 40195251

8 Plastic crevice nozzle, 40 mm male coupler section. Length: 360 m. Width: 45 x 10 mm. 40193090

9 Steel crevice nozzle, 40 mm male coupler section. Length: 310 mm. Width: 55 x 15 mm. 40193620

10 Tapered plastic nozzle for tight spaces, 40 mm male coupler section. Length: 230 mm. Width: Ø 32-38 mm. 40193130

11 Tapered rubber nozzle for tight spaces, 40 mm male coupler section. Length: 230 mm. Width: Ø 25-32 mm. 40193110

12 Crevice nozzle with notches in conductive plastic, 50 mm male coupler section. 130x40mm. 40196610

13 Tapered nozzle in conductive plastic, Ø 25 mm. 50 mm male coupler section. 40196620

14 Round hand tool with soft brush in conductive plastic, Ø 85 mm. 50 mm male coupler section. 40196600

15 Round hand tool with hard brush in conductive plastic, Ø 85 mm. 50 mm male coupler section. 40196590

16 Steel swarf nozzle, Ø 50 mm. Silenced inlet. 40150030

16 Steel swarf nozzle, Ø 63 mm. Silenced inlet. 40193610

17 Hose shelf, 10 m, Ø 50 mm. 40195452

18 Shelf for approx. 10 m, Ø 38 mm hose. Pocket for accessories. Suspending fork for floor cleaning equipment. 40196370

Cleaning equipment accessories

1 2 3 4 5 6 7 8 9

10 11 12 13 14 15 16 17 18

73 www.nederman.com


C-hose for High Vacuum Extraction

Flexible and durable electrically conductive plastic hose. Mainly used for floor cleaning when exceptionally good con-ductivity of static electricity is required. Temperature: -40 - + 60° C

MH-hose for High Vacuum Extraction

Heavy duty rubber hose. Used for metal chip extraction or heavy cleaning. Larger diametres are used for connection of pre-separators. Temperature: -25 - + 60° C

H-hose for High Vacuum Extraction

Flexible and durable hose. Mainly used for floor cleaning equipment and as extension hose for on-tool extraction. Tem-perature: -40 - + 60° C

FS-hose for High Vacuum Extraction

Flexible plastic hose with a steel spiral insert for conduction of static electricity. Mainly used for on-tool extraction and extrac-tion on balance arms. Temperature: 0 - + 80° C

Ø, mm Delivery length, m Part no.

25 15 40160305

32 15 40160315

38 15 40160323

51 15 40160333


38 20 40160735

45 20 40160753

51 20 40160745


51 5 40161191

51 10 40161192

51 40 40161193

63 5 40161201

63 10 40161202

63 40 40161203

76 5 40161211

76 20 40161212

76 40 40161213

102 5 40161221

102 10 40161222

102 40 40161223

152 5 40165151

152 10 40165152

152 20 40165153


25 15 40160102

32 15 40160152

38 15 40160202

44 15 40160223

51 15 40160252

63 15 40160263

76 15 40165183

74 www.nederman.com


Hose Couplers

Hose Couplers Ø 40 mm

The hose coupler system is available in a wide range to suit most hose diameters commonly used. The couplers are made from electrically con-ductive plastic material, and are available in two diameters of the tapered coupler section 40 and 50 mm. The male 50 series fits directly to the KV flap valve and the automatic TAV valve. To connect the 40 series to either the 50 series or to the above mentioned valves an adapter is used. Using the couplers makes it very easy to connect / disconnect the vacuum hose simply by turning pushing or turning pulling.

Hose Couplers Ø 50 mmModel Type Hose Ø, mm Part no.

M40-25P Male 25 40151070

M40-32P Male 32 40151060

M40-38P Male 38 40151050

F40-32P Female 32 40151040

F40-38P Female 38 40151010

F40-50P Female 50 40151020

M40-44A Male (alu.) 32 40150200

Model Type Hose Ø, mm Part no.

M50-38P Male 38 40151110

M50-44P Male 44 40151120

M50-50P Male 50 40151100

F50-50P Female 50 40151030

FM40-50P Male/Female 40151300

F50-63S Male (steel) 63 40151130

F50-44S Male (steel) 44 40151140

75 www.nederman.com


Exhaust systems for stationary vehiclesThe systems presented in this section are used for extracting exhaust from parked vehicles. All solutions offer simple installation and optimal extrac-tion efficiency. Nederman also has systems for vehicles in motion. For more information please visit: www.nederman.com

Vehicle category Extraction rate, m³/h Hose Ø, mm

Passenger car 400 - 600 75/100

Light commercial vehicles (LCVs) 800 - 1000 125/150

Heavy commercial vehicles (HCVs) 1000 - 1200 150/200

Exhaust System Guide Single bay Multiple bay Cars Heavy vehicles

Single/Twin Exhaust Extractor X X (twin bay) X X

Exhaust Hose Reel X X X X

Exhaust Rail System 920 X X X

Trackarm X X (twin bay) X

76 www.nederman.com


Single/Twin Exhaust ExtractorSingle Exhaust Extractor is a reliable and functional solution for all types of stationary vehicles. Available with balancer or a cord for manual hose suspension. The balancer automatically raises the hose and nozzle after disconnection, and keeps them lifted at all times. Models for high tem-perature application are available. Very easy to install, using the included bracket. Prepared for fan mounting on bracket. Twin Exhaust Extrac-tor removes exhaust fumes from two vehicles at the same time, or from vehicles with twin exhaust pipes. Very easy to install, using the included bracket. Prepared for fan mounting on bracket.

Easy handling of exhaust hoseTakes up very little spaceLow cost solutionEasy to install

••••

Single Exhaust Extractor

Twin Exhaust Extractor

Hose Ø, mm Hose type* Hose length, m Balancer Cord suspension Automatic disconnection Exhaust nozzle Part no.

75 NR-B 5.0 X 20813063

100 NR-B 5.0 X 20813163

100 NR-CP 7.5 X 20813263

100 NR-CP 6.0 X X Part no. 20322139 included 20813663

150 NR-CP 7.5 X 20813363

150 NR-CP 6.0 X X Part no. 20322140 included 20813763

150 NFC-3 6.0 X 20813463

200 NFC-3 6.0 X Part no. 20807061 included 20813563

Hose Ø, mm Hose type* Hose length, m Cord suspension Fan included Exhaust nozzle Part no.

75 NR-B 5.0 X N16 20813963

100 NR-B 7.5 X N16 20814063

150 NR-B 5.0 X N24 Part no 20866661 included 20814163

* Hose type - see separate section

Hose Ø, mm Hose type* Hose length, m Cord suspension Part no.

100 NR-B 5.0 X 20813863

Single Exhaust Extractor Kit

77 www.nederman.com


Exhaust Hose Reel 865

For all types of vehicle workshops, etc. where the hose can hang at a reachable height. Separate mounting brackets enable a simple and safe installation. The patented spring drive makes the reel very easy to handle. For best economy, an automatic fan on/off switch is available. Optional retraction control is available for increased safety and efficiency. Mount-ing of fan on reel is possible. The spring recoiled hose reel can be up-graded to motor drive. Maximum lifting capacity: 27 kg. Two types of reels are available: - With hose NR-B (see “Exhaust Hoses”) - With hose NR-CP (see “Exhaust Hoses”), and patented, integrated auto-matic damper, which saves energy and reduces the noise level.

Spring recoiled

* Hose type - see separate section ** with reinforced spring

Hose Ø, mm Hose type* Hose length, m Type of body Automatic damper Reinforced spring Part no.

75 NR-B 5.0 short 20800865

75 NR-CP 5.0 short X 20801465

100 NR-B 5.0 short 20800665

100 NR-B 7.5 short 20801565

100 NR-B 7.5 short X 20805265**

100 NR-B 10.0 wide 20801865

100 NR-CP 5.0 short X 20801365

100 NR-CP 7.5 short X 20801265

100 NR-CP 7.5 short X X 20805365**

100 NR-CP 10.0 wide X 20801965

125 NR-B 5.0 short 20800465

125 NR-B 7.5 wide 20801765

125 NR-B 10.0 wide 20801665

125 NR-CP 5.0 short X 20801165

125 NR-CP 7.5 wide X 20802065

125 NR-CP 10.0 wide X 20802165

150 NR-B 5.0 short 20800265

150 NR-B 7.5 wide X 20802565**

150 NR-B 10.0 wide X 20802465**

150 NR-CP 5.0 short X 20801065

150 NR-CP 7.5 wide X X 20802265**

150 NR-CP 10.0 wide X X 20802365**

Reel with hose

Reel without hoseFor hose Ø, mm Type of body Automatic damper Reinforced spring Part no.

75 short X 20800965

100 short 20804365

100 wide 20804665

100 short X 20800765

100 wide X 20800365

125 short 20804465

125 wide 20804765

125 short X 20800565

125 wide X 20800165

150 short 20804565

150 wide X 20804865**

150 short X 20804165

150 wide X X 20804265**

78 www.nederman.com


Electric motor driven

The best solution in workshops with a high ceiling, where overhead cranes etc. have to be considered, or where high vehicles must pass. Operated via a hand unit either an IR control or pendant control. A receiving eye on the reel shows the status of operation. Electronic limit switches reduce the risk of malfunction and unnecessary wearing of the hose. Fan start/stop is automatically controlled. Mounting of fan on reel is possible.

Convenient and safe operationAutomatic fan operationSettings for limit switches made from floor levelCompact, modern designQuick & easy installation reduces costSimple electrical installation

••••••

Power supply, V 100-240

Phase 1

Frequency, Hz 50/60

Max lifting capacity, kg 30

Hose Ø, mm Hose type* Hose length, m Type of body For hand control Limit switches Part no.

100 NR-CP 7.5 wide IR or pendant X 20802965

100 NR-CP 7.5 short IR or pendant X 20804965


100 NFC-3 7.5 wide IR or pendant X 20803065

100 NFC-3 7.5 short IR or pendant X 20805065










Exhaust Hose Reel 865

Reel with hose

Reel without hoseFor hose Ø, mm Type of body For hand control Limit switches Part no.

100 wide IR or pendant X 20802665

100 wide pendant 20805565






79 www.nederman.com


Exhaust Rail System 920Easy to handle systems for all types of workshops. Unique design of rail and trolley gives very high extraction efficiency. Extraction units are available with balancer for keeping the hose raised, and damper for auto-matic airflow control. Using click on brackets for rail means easy instal-lation. Extraction units are easy to move, thanks to lightweight material and ball bearing wheels. One extraction unit can serve several workbays. Two 400 units serve cars with twin exhaust pipes. Manual disconnection of exhaust nozzles.

Compact, modern designEasy to positionAutomatic damper for airflow controlQuick and simple installation reduces cost

••••


Rail kit 920** Extraction unitsLength, m Part no.

2.5 20916020

5 20916120

7.5 20916220

10 20916320

12.5 20916420

15 20916520

17.5 20916620

20 20916720

22.5 20916820

25 20916920

27.5 20917020

30 20917120

35 20917220

40 20917320

45 20917420

50 20917520

60 20917620

70 20917720

80 20917820

90 20917920

100 20918020

Trolley Hose Ø, mm Hose type* Hose length, m

Nozzle storage

Balancer Damper Hose suspension

Part no.

400 100 NR-B 5.0 X 20915420

400 100 NR-CP 5.0 X 20915320

400 100 NR-B 5.0 X X 20915720

400 100 NR-CP 5.0 X X 20915220

400 100 NR-B 7.5 X 20915120

400 100 NR-B 5.0 X X 20915620

400 100 NR-CP 5.0 X X 20915520

400 100 NR-B 7.5 X X 20915020

1500 150 NR-CP 5.0 X X X 20914020

1500 150 NR-B 5.0 X X X 20914120

1500 150 NR-B 5.0 X X 20914220

1500 150 NR-CP 5.0 X X 20914320

1500 150 NR-B 5.0 X X 20914420

1500 150 NR-CP 5.0 X 20914520

1500 150 NR-B 5.0 X 20914620

1500 150 NR-CP 5.0 X X 20914720

Accessory Rail kit For 400-trolley For 1500- trolley Part no.

Top connection. Outlet: Ø 200 mm X 20374246

Damper, Ø100 mm X 20373752

Damper, Ø160 mm X 20373796

Balancer kit X 20373759

Safety coupling, Ø100 mm X 20373797

Safety coupling, Ø150 mm X 20373798

** Complete with suspension parts, joint connectors, rubber seals, end covers and end stops.

80 www.nederman.com


Description Capacity, kg Part no.

Balancer, incl latch 5–11 20800431

Balancer, incl latch 7–15 20800631

BalancerThe balancer supports the exhaust hose and keeps the hose and nozzle lifted at all times. The reversed spring power makes handling the hose very easy and safe, offering an even pulling force and lifting power. An in-tegrated centrifugal brake prevents the hose from being lifted too quickly, which minimises the risk of personal injury and damage to vehicles. Hoist length: 8m. Maximum lifting power: 15kg

Makes the hose easier to handleReduces wearing of hose and nozzleSafe balancer operationExceptional hoist length

••••

Accessory Part no.

Pivoting bracket 20331947

On/off switch 20374015

Emission test kitThis kit is a well proven solution for emission tests on both cars and trucks. Based on Single Exhaust Extractor, the emission test kit has a ca-pacity to handle large volumes of high temperature exhaust. The specially designed funnel can be angled vertically, and is adjustable in height as well. The funnel is slotted for exhaust gas analysis device.

Funnel fully adjustableSystem handles large volumes of hot exhaustSuitable fan is included

•••

Hose Ø, mm Hose type* Hose length, m Fan Exhaust nozzle Part no.

150 NR-B 5.0 Part no. 14510422 (N24, 50 Hz) included Part no. 20815961 included 20812463



Emission test funnels

Description Connection to hose Ø, mm Part no

1 For cars. Suitable also for downward facing or hidden exhaust pipes. Funnel rotatable 360°, vertically adjustable 0-600 mm. Complete with stand, which includes four wheels, two with brake.

150 20815961

2 For heavy vehicles. Complete with stand. Vertically adjustable 130-140 mm.

200 20807261

1 2

81 www.nederman.com


TrackarmWall mounted Trackarm is designed for heavy stationary vehicles and equipment. It is a solution for premises where crane bridges, height of ceiling, etc. make ceiling mounting of other systems difficult. The horizontal hose is compressible, and fixed to a 180° pivoting arm. The bal-ancer keeps the hose lifted and stretched at all times. This makes Trackarm very flexible to use and easy to operate.

Simplifies handling of large and heavy hosesReaches exhaust pipes anywhere within an area of 76 m²Hose is out of the way at all timesSafe operation with safety couplingFor large airflow requirementsExtraction arm is out of the way when need for free passage

••••••

Hose Ø, mm Hose type* Working range, m Exhaust nozzle Part no.

150 NFC-3 7.0 Part no. 20806961 included 20808663

200 NFC-3 7.0 Part no. 20807061 included 20804064


82 www.nederman.com


Exhaust NozzlesRubber nozzles quick and easy to connect and disconnect.Metal nozzles simple and robust, resistant to very high temperature exhaust.Emission test funnels and special design for handling large volumes of hot exhaust and for various types of exhaust pipes e.g. at inspection centers.

For information about other Nederman exhaust nozzles, e.g. pneumatic nozzles and nozzles for automatic disconnection, please contact your near-est Nederman dealer.

••

•

Rubber nozzles with manual disconnection

Description Max. exhaust pipe Ø, single, mm

Max. exhaust pipe Ø, twin, mm

Connection to hose Ø, mm

Part no.

1 For cars. Beak nozzle. 75 75 20866561

1 For cars. Beak nozzle. 75 100 20866461

2 For cars. Beak nozzle. 125 150x80 75 20866961

2 For cars. Beak nozzle. 125 150x80 100 20866861

2 For cars and heavy vehicles. Beak nozzle. 125 150x80 125 20866761

2 For cars and heavy vehicles. Beak nozzle. 125 150x80 150 20866661

3 For cars. Slips on to the exhaust pipe. Without locking device. 100 75 & 100 20815261

4 For cars. Spring-loaded lid, wire guard and opening for CO-probe. Without locking clamp. 110 150x110 100 20802561

5 For cars. Spring-loaded lid, wire guard, metal hose and opening for CO-probe. 75 100x75 75 20803461



6 For cars. Wire guard and opening for CO-probe. Without lid. 75 100x75 75 20804061



7 For cars. Wire guard and opening for CO-probe. Hose connection angled 60°. 75 150x75 75 20805461

7 For cars. Wire guard and opening for CO-probe. Hose connection angled 60°. 75 150x75 100 20805561

7 For cars. Wire guard and opening for CO-probe. Hose conn. angled 60°. For trim exhaust pipes

75 150x75 100 20808361

8 For heavy vehicles. Lid, wire guard and metal hose. 150 100 20803161



9 For heavy vehicles. Wire guard and opening for CO-probe. Hose connection angled 60°. 100 200x100 125 20805661

9 For heavy vehicles. Wire guard and opening for CO-probe. Hose connection angled 60°. 100 200x100 150 20805761

10 For heavy vehicles. Wire guard. 150 125 20805861

10 For heavy vehicles. Wire guard. 150 150 20805961

11 For heavy vehicles. Swivel and lengthwise compressible hood. 180 240x230 150 20806961

11 For heavy vehicles. Swivel and lengthwise compressible hood. 230 240x230 200 20807061

All rubber nozzles are resistant to temperatures up to 150 °C

1 2 3 4 5 6 7 8 9 10 11

83 www.nederman.com



1 Adapter for Ø75 mm hose, for nozzle no. 20802561 20373128

2 Adapter for double exhaust pipes, with two hoses, each Ø100 mm, length 1.25 m 20815061

Metal hose for nozzle no. 20805961 20372784

Description Max. exhaust pipe Ø, single, mm

Connection to hose Ø, mm

Part no.

For heavy vehicles. Made of aluminium. With wire guard. 125 150 20804761

For heavy vehicles. Made of aluminium. With wire guard. 170 200 20804961

Description Max. exhaust pipe Ø, mm Connection Ø, mm Part no.

1 For vertical exhaust stack pipes. Length: 2600 mm 250 140 20801961

2 Rubber cone nozzle for vertical stack pipes 150 150 20808461

2 Rubber cone nozzle for vertical stack pipes 250 125/150/200 20808861

3 Galvanized steel cone nozzle for vertical stack pipes 150 150 20816461




4 Telescopic lifting pole for rubber cone nozzle (20808461, 20808861) 20374287

5 With floor stand. Vertically adjustable. Suitable when a locking clamp cannot be used. 160 100 20802061

Metal nozzles with manual disconnection

Nozzles with special design

Accessories for exhaust nozzles

1 2

1 2 3 4 5

84 www.nederman.com


Exhaust Hoses

1. Rubber hose NR-BFor light dutyTemp. resistance: Continuous use: up to +150°CLight weight and abrasion resistant

•••

2. High temperature hose NFC-3Temp: Continuous use: +300°C Intermittent use: +350°CLight weight and highly resistant to diesel particles

••

1. Rubber hose NR-CPHeavy duty hoseCrush-proof and abrasion resistantTemp. resistance: Continuous use: +150°C Intermittent use: +170°C

•••

3. Extremely high temperature hose NFC-6.5

Temp. resistance: Contin. use: +650°C Intermittent use: +750°CAsbestos free, high temperature fabric and silicone free

•

•

Hose Ø, mm Hose length, m Part no.

75 2.5 20824062

75 5.0 20821562

100 2.5 20824162

100 5.0 20821662

100 7.5 20821762

100 10.0 20821862

125 2.5 20824262

125 5.0 20821962

125 7.5 20822062

125 10.0 20822162

150 2.5 20824362

150 5.0 20822262

150 7.5 20822362

150 10.0 20822462

200 5.0 20810562

200 10.0 20810662


75 2.5 20820162

75 5.0 20820262

100 2.5 20820362

100 5.0 20820462

100 7.5 20820562

100 10.0 20820662

125 2.5 20820762

125 5.0 20820862

125 7.5 20820962

125 10.0 20821062

150 2.5 20821162

150 5.0 20821262

150 7.5 20821362

150 10.0 20821462

200 5.0 20810762

200 10.0 20823962


100 2.5 20822562

100 5.0 20822662

100 7.5 20822762

100 10.0 20822862

125 2.5 20822962

125 5.0 20823062

125 7.5 20823162

125 10.0 20823262

150 2.5 20823362

150 5.0 20823462

150 7.5 20823562

150 10.0 20823662

200 5.0 20823762

200 10.0 20823862


150 2.5 20824462

150 5.0 20824562

200 2.5 20824762

200 5.0 20824662

The Nederman exhaust hoses are specifically designed to be ductile and to have a very low pressure drop. They are resistant to all chemicals in diesel and petrol exhaust fumes, and show high resistance to mechanical stress.1 2 3

85 www.nederman.com


Exhaust Hose Reel Accessories

Description For spring recoiled reel For motor diven reel Part no.

1 Retraction control kit X 20373880

2 On/off switch X 20373557

3 Pendant control excl. cable X 20373521

3 Pendant control, incl. 5 m cable. X 20373712

4 IR-transmitter. X 20373522

5 Fan bracket X X 20373556

6 Hose adapter Ø75 mm X 20373586

6 Hose adapter Ø100 mm X X 20373587



7 Hose stop Ø75 mm X 20344475




Transformer for fan controls 230/24V, 75VA, 50 Hz X X 10361560

Transformer for fan controls 230/24V, 25VA, 50 Hz X X 10363189

Spring 25 x 1.0 x 10000 mm X 20373592

Spring 25 x 1.1 x 15000 mm X 20373593

Spring 40 x 1.0 x 18000 mm X 20373594

8 Upgrade-kit for double springs (excluding springs). X 20374111

9 Extraction trolley Reel on Rail, for spring recoiled reel used in combination with rail ALU 150. For further information, please contact your nearest Nederman dealer.

X 20948610

1 2 3 4 5 6 7 8 9

86 www.nederman.com


Exhaust Hoses Accessories

Description Ø, mm Part no.

1 Connector, galvanized steel 150-125 20344353



2 Bend 90°, galvanized steel 75 20344590




3 Rubber cover with hose clip, pair 75 20342489





4 Joint piece, galvanized steel, with hose clamp & rubber cover 75 20373286





5 Quick coupling, galvanized steel, male 100 20947710




6 Quick coupling, galvanized steel, female 100 20948110




7 Hose suspension 75 20373615




8 Hose coupling, incl two sleeves and removable strap 100 20947410




1 2 3 4 5 6 7 8

87 www.nederman.com


Standard sized curtains (see below) provided with 50 mm welded seam all around and with snap-fasteners on both sides for joining to obtain total desired width. Supplied with reinforced holes in the upper edge and steel suspension rings. All standard curtains are made of pliable self extinguish-ing PVC-material with flash point 320-390ºC. Width: 1400 mm, Thick-ness: 0.40-0.50 mm. The Nederman yellow and clear transparent curtains are used for glare, splatter, grinding, dust etc. but are not aimed for weld-ing. Otherwise same features as the above standard curtains.

Curtains

Steel suspension rings included. PVC-rings available as accessories. Total width of curtains shall be 10% longer than total required screening length to compensate for folding. Can be supplied in other heights on demand.

Replacement parts

The protection curtain screens are easily removable for welding, grind-ing, turning, milling etc, and are ideal for the screening of temporary or permanent work places. The frame is manufactured from galvanised tube and the curtain of self-extinguishing PVC material in same colours as the standard curtains above (whereof four are complying to EN1598 for welding). Delivered complete with frame and curtain with total dimension WxH=1700x2000mm (just curtain H=1700 mm). Weight 7.5kg.

Curtain Screen

Colour Height, mm Approvals Part no.

Dark green (black), Opaque 1800 EN 1598 60313124



Dark green, Transparent 1800 EN 1598 60313424



Red / orange, Transparent 1800 EN 1598 60313324



Bronze, Transparent 1800 EN 1598 60313224



Yellow, Transparent 1800 - 60313524



Clear, Transparent 1800 - 60313624




PVC rings, 7-pack 60344976

Steel rings, 7-pack 60064850

Colour Approvals Part no.

Dark green (black)Opaque EN 1598 60931052

Dark green Transparent EN 1598 60931050

Red / orange Transparent EN 1598 60931056

Bronze Transparent EN 1598 60931057

Yellow Transparent - 60931055

Clear Transparent - 60931054

88 www.nederman.com


The Nederman curtain strips are used instead of full curtains when the mechanical load from passing through is heavy and regular and also when protection is required because of draught, moisture, oilmist, cold etc. The strips are made of PVC material, 2 or 3mm thick and 300mm wide, which can be mounted with 50 or 100 mm (33% or 66%) overlap. When request-ed height is above 2.8m the 3mm thick strips are recommended as well as 100 mm (66%) overlap. Also when the passage is used by fork lift trucks the 3mm strips are recommended. The strips are as standard delivered in 5 pack of 1.8m cut length or as 50m roll, to be cut on site.

Curtain Strips

Complete suspension kit – includes suspension clips, filling pieces, wall/ceiling bracket and suspension tube.

* Corresponds to multiples of 5 pack of curtain strips.

* When cut height is above 2.8 m, 3 mm thickness is recommended

Mechanical load Height, m Thickness, mm Colour Approvals Part no.

low-med 1.8 (5-pack) 2 Dark green/black opaque EN 1598 60662902

low-med 1.8 (5-pack) 2 Dark green transparent EN 1598 60662602

low-med 1.8 (5-pack) 2 Bronze transparent EN 1598 60662702

low-med 1.8 (5-pack) 2 Red/orange transparent EN 1598 60662502

low-med 50 (full roll) 2* Dark green opaque EN 1598 60962902

low-med 50 (full roll) 2* Dark green transparent EN 1598 60962602

low-med 50 (full roll) 2* Bronze transparent EN 1598 60962702

low-med 50 (full roll) 2* Red/orange transparent EN 1598 60962502

low-med 1.8 (5-pack) 2 Clear transparent - 60662002

low-med 50 (full roll) 2* Clear transparent - 60962002

heavy 1.8 (5-pack) 3 Dark green/black opaque EN 1598 60662903

heavy 1.8 (5-pack) 3 Red/orange transparent EN 1598 60662503

heavy 50 (full roll) 3 Dark green/black opaque EN 1598 60962903

heavy 50 (full roll) 3 Red/orange transparent EN 1598 60962503

heavy 1.8 (5-pack) 3 Clear transparent - 60662003

heavy 50 (full roll) 3 Clear transparent - 60962003

Height, m Overlap, mm Total width*, m Part no.

= 2.8 50 (33 %) 1.30 (= 5 strips) 60911305

= 2.8 50 (33 %) 2.55 (= 10 strips) 60912305

= 2.8 50 (33 %) 3.80 (= 15 strips) 60913305

= 2.8 50 (33 %) 5.05 (= 20 strips) 60914305

> 2.8 100 (66 %) 1.1 (= 5 strips) 60911105

> 2.8 100 (66 %) 2.1 (= 10 strips) 60912105

> 2.8 100 (66 %) 3.1 (= 15 strips) 60913105

> 2.8 100 (66 %) 4.1 (= 20 strips) 60914105

> 2.8 100 (66 %) 5.1 (= 25 strips) 60915105

No.

989

1079

90

AB Ph. Nederman & Co Sydhamnsgatan 2

SE-252 28, Helsingborg, Sweden Tel: +46 42 18 87 00, Fax: +46 42 14 79 71

E-mail: [email protected]

AustraliaNederman Pty. Ltd.13, 17-23 Keppel DriveHallam, Victoria 3803Tel: +61 3 97023233Fax: +61 3 97023655Email: [email protected]

AustriaNederman Austria GmbHOtto-Probst-Strasse 36/I/1.OG1100 WienTel: +43 1 889 67 34Fax: +43 1 889 6734 92Email: [email protected]

BelgiumNederman n.v./s.a.Bergensesteenweg 181 Chaussée de MonsSint-Pieters-Leeuw 1600 Leeuw-Saint-PierreTel: +32 2 334 2250Fax: +32-2 334 2251Email: [email protected]

CanadaNederman Canada Ltd6675 Millcreek DriveMississaugaOntario L5N 5M4Tel: +1 905 542 9296Toll Free:1 866 332 2611Fax: +1 905 542 2206Email: [email protected]

ChinaAB Ph. Nederman & Co Shanghai OfficeRm 2301, No. 1 Bldg, Hengyuan Lane 201Zhaojiabang Rd.Shanghai 200020Tel: +86 138 1669 4143Email: [email protected]

Czech RepublicNederman CR, s.r.o.Ve Žlíbku 1800193 00 Praha 9 - Horní PočerniceTel: +420 281 012 331-7Fax: +420 281 012 330Email: [email protected]

DenmarkNederman Danmark ApsHolmensvej 24 A3600 FrederikssundTel: +45 70 200 302Fax: +45 47 311 630Email: [email protected]

FranceNederman SASZAC de la Barogne7, rue des Longues Raies77230 Moussy le NeufTel: +33 1 60 03 82 82Fax: +33 1 60 03 82 83Email: [email protected]

GermanyNederman GmbHKelterstrasse 6572669 UnterensingenTel: +49 7022 9600-0Fax: +49 7022 9600-29Email: [email protected]

HungaryNederman Magyarország Kft.Csányi László u. 341043 BudapestTel: +36 1 272 0277Fax: +36 1 272 0278 Email: [email protected]

IndiaAB Ph. Nederman & Co002, Scion Park View Apartments1st Cross, Doctor’s LayoutKasturinagar, Bangalore – 560 043KarnatakaTel: +91 80 41612181Fax: +91 80 41612181Email: [email protected]

AB Ph. Nederman & CoD-6 A, Moti NagarNew Delhi 110 015Tel: +91 11 25112177Fax: +91 11 25112177Email: [email protected]

IrelandNederman LtdCo WicklowTel: +353 01 287 6073Fax: +353 01 287 6819Email: [email protected]

Northern IrelandNederman LtdCo ArmaghTel: +44 (0) 2837 551529Fax: +44 (0) 2837 551608Email: [email protected]

NorwayNederman A/SPostboks 26, HaugenstuaHaavard Martinsens vei 190915 Oslo 9Tel: +47 22 790 210Fax: +47 22 790 215Email: [email protected]

PolandNederman Polska Sp. z o.o.ul. Ks. Bpa Bednorza 2a-640-384 KatowiceTel: +48 32 201 97 92Fax: +48 32 201 83 24Email: [email protected]

PortugalNederman Ibérica SA – PortugalAlameda dos Oceanos Lt 3.15.02 Loja A1990-197 LosboaTel: +351 21 892 34 40Fax: +351 21 892 34 [email protected]

RomaniaNederman & Co SRL31-33 Constantin Sandu Aldea St., Ap 2Bucharest 1Tel: +40 724 127 345Fax: +40 722 181 450Email: [email protected] Russia/РоссияДенисовский переулок, 26105005 МоскваEmail: [email protected]

Slovak Republicc/o Nederman CR, s.r.o.Ve Žlíbku 1800193 00 Praha 9 - Horní PočerniceTel: +420 281 012 331-7Fax: +420 281 012 330Email: [email protected]

SpainNederman Ibérica S.A.Avada. Camino de lo Cortao, 34 Nave 528709 San Sebastian de los Reyes (Madrid)Tel: +34 91 659 24 30Fax: +34 91 651 33 94Email: [email protected]

SwedenAB Ph. Nederman & CoSydhamnsgatan 2252 28 HelsingborgTel: +46 42 18 87 00Fax +46 42 20 89 53Email: [email protected]

UKNederman Ltd 91 Walton Summit Industrial Estate Bamber Bridge Preston Lancashire PR5 8AF Tel: +44 (0) 1772 334721 Fax: +44 (0) 1772 315273 Email: [email protected]

USANederman, Inc.39115 Warren RoadWestland, MI 48185Tel: +1 734 729 3344Fax: +1 734 729 3358Toll Free: (800) 575-0609Email: [email protected]

Other countriesAB Ph. Nederman & CoNederman InternationalSydhamnsgatan 2SE-252 28 Helsingborg, SwedenTel: +46 42 18 87 00Fax +46 42 20 89 53Email: [email protected]

nederman catalog

Documents