1

NDT Inspection Service Hitachi Power Systems Canada Ltd.

826 58th Street East Saskatoon, SK

S7K 5Z4 Main Desk: 306-242-9222

Inspection Scheduling: 306-222-4137

2

X-Ray Model: ERESCO 65 MF4

Specs: Range: 5 to 300kV Penetration: Up to 65mm Physical size: 290mm dia, 1020mm length Power Requirement: 110V, 20A Gamma Ray

Model 880 Delta Projector Source: IR-192 150Ci Max. Penetration: Up to 75mm Model 110 Sentry Source: Co-60, 110 Ci Max. Penetration: Up to 229mm

X-Ray Tube/Ir-192 and Co-60 Gamma RT

Model: GEIT CRxFlex, and CRx-25P (Portable) Phosphor Imaging Plate Scanners Specs: Capacity: Up to 14” x 17” phosphor plates Imaging: GE Rhythm Soft ware and high resolution viewer Laser Spot Size: 30µm Pixel Size: 50µm and 100µm Bit Depth: 16-bit Linear Conventional Film and Processing Up to 14”x17” Kodak film Fully equipped, mobile dark room.

Computed/Film Radiography

3

Model: Sonatest Veo Specs: 16:64 phased array Supports ASME Use of Ultrasonic Examination in Lieu of Radiography Model: Olympus Omniscan MX2 Specs: 32:128 phased array Supports ASME Use of Ultrasonic Examination in Lieu of Radiography HydroFORM pipe corrosion mapping and weld inspection (4” and larger diameter) Wheel encoder for ASME compliant semi-automated PAUT in lieu of RT Cobra scanner for pipe weld inspection from 0.84” to 4.5” outside diameter

Phased Array Ultrasonics

4

Model: Magnaflux M-500 Mobile Power Pack

Specs: with Demag— 4000Amps AC/HWDC

Model: XDR – 966 Slave Bench

Specs: 305mm(12”) Coil, 2438mm (96”) bed

Prods and coil wrap available

Magnetic Particle

Models: GEIT USN58L

KKB USN52L

Specs: Pulse Echo, dual, and through transmission

1mm to 12.2m range

Multiple curve DAC/TCG function

Conventional Ultrasonics

5

Model: Quantum Series Arm

Specs: Working Volume: 2438 mm (96”) (1219 mm (48”) radius)

Volumetric Accuracy: Up to 0.017 mm (0.0007”) over 2438 mm (96”)

Measuring Software: CAM2Q

Laser Line Probe Scanner attach-ment

Fully mobile

Faro-Arm

Model: FARO Ion Laser Tracker with interferometer

Specs: Ø110,000 mm (4330.7”) Range

0.05 mm (0.002”) volumetric accuracy at 10,000 mm (393.7”)

Fully mobile

Laser Tracker

6

Model: Fischer Feritscope MP30

Specs: Non-destructive measurement of the ferrite content in a range of 0.1 to 110 FN or 0.1 to 80% Fe in austenitic and duplex steel.

Ferrite Testing

Model: Niton XLp 818 XRF Analyser

Specs: Am-241 radioisotope Metal and Alloy analysis

PMI (Positive Material Identification)

7

Other NDT Capabilities

Ultrasonic Test Equipment -Convensional UT equipment (KKB USN 52/58L) -HARFANG X-32 Phased Array -Sonatest Veo Phased Array -Olympus Omniscan MX2 (With scanners, piping from 2” to unlimited) -StressTel T-Mike EZ Ultrasonic Thickness Gauge -ASME Code Demonstrated Procedures Magnetic Particle Testing Equipment -Magnaflux XB-2A Powder Blower -Magnaflux M-500 Mag Unit (coil wrap, 4000 amps) -AC/DC Yokes -Permanent Magnets -Wet Fluorescent, Wet Visible, Dry Visible Media -Ultraviolet lights -Calibrated UV and Visible Light Meter -ASME Code Demonstrated Procedures Liquid Dye Penetrant Testing -Fluorescent Solvent Removable, and Water Wash Technique -Visible Solvent Removable, and Water Wash Technique -ASME Code demonstrated Procedures -Ultraviolet lights -Calibrated UV and Visible Light Meter

Other -Test Systems International Crack Check CC-800B DT Machine -Fiber Optics Borescope – Everest VIT Videoprobe PXLA630A -Video Borescope – GE Inspection Technologies – XL VU Videoprobe -Coating Thickness Measurement -Portable Hardness Measurement -Adhesion Testing -Gloss Measurement -Ferrite Testing (Fischer Feritscope MP30) -Oven Thermocouple and Recording Device Calibration -Pressure Gauge Calibration Certifications -CGSB/SNT UT/RT/MT/PT Level 2 and 3 Certified Personnel -CWB W178.2 Level 1 & 2 Certified Visual Inspectors (CSA W47.1, W59, ASME VIII-1 & IX)