ncr m4 one shot tech specs
DESCRIPTION
Specs on the new NCR M4TRANSCRIPT
TECH SPEC
www.ncrfactory.com
PRICE
WEIGHT
MOTOR
POWER
FRAME
SUBFRAME
FUEL TANK
FRONT BRAKE
$ 69,900 US (for the US market)
126 Kg (278 LBS)
NCR 1200cc motor with NCR F1 type stroker billet crankshaft, titanium connecting rods machined from forged billet, high compression forged 102mm pistons , custom NCR cylinders, NCR CORSE cams, ported heads, NCR-EVR dry-type slipper clutch, NCR oil cooler, all engine fasteners in titanium
132 Hp at 8,700 RPM - Torque 14,3 Kgm (105 ft-lbs) at 7,000 RPM
NCR titanium frame weight 4.8 Kg (10.6 lbs)
NCR titanium subframe with Schedoni leather seat on a carbon fiber base
NCR carbon fiber tank. Capacity: 13 Lt - 3.45 Gallons
300 mm WAVE Braking-NCR, radial Brembo Racing 4 piston (108mm version)
REAR BRAKE 200 mm WAVE Braking-NCR, Brembo Racing 2 piston
FRONT SUSPENSIONOhlins 43 mm upside-down fork with TiN surface treatment, adjustable off-set, radial calipers with NCR CORSE billet aluminum fork bottoms, tuned by NCR CORSE. Triple clamps made from billet AL 7075 with an adjustable offset of 24 to 32 mm in 2 mm increments
STEERING DAMPER Ohlins
REAR SUSPENSION Fully adjustable Ohlins monoshock with eccentric adjustor. Tuned by NCR CORSE
OTHER CARBON FIBER PARTS Airbox, front and rear fenders, oil cooler housing, oil cooler support, counter sprocket cover, chain guard, mirror and headlight housing
EXHAUST SYSTEM NCR full stainless steel system with catalytic converter and exhaust valve 5.1 kg (11.2 lbs)
WHEELS BST-NCR Carbon fiber wheels
ELECTRONICSNew Magneti Marelli high speed cpu with traction control and NCR designed military wiring and connectors. Quick disconnect interfaces. Lightweight lithium battery. AIM MXL Display (Strada) with laptop interface. Laptop software and direct plug battery charger
COLORS Clear coat. Custom paint available on request
FASTENERS Completely using Poggipolini Titanium fasteners
SPECIAL PARTSAdjustable rear sets in AL 7075 and titanium, gas cap assembly in aluminum from billet, clip-ons in AL 7075 with titanium tubes, triple clamps from AL 7075 with adjustable offset from 28 to 36 mm, steering damper with billet mount in titanium, billet oil fill cover, front fairing stay in aluminum, NCR larger slave master machined from billet, titanium oil reservoirs
All parts are designed, developed and produced by NCR.All specifications subject to change without prior notice.