ncode premium materials database v5
TRANSCRIPT
nCode Premium Materials DatabaseNC-PR-DB 13.10.001
Premium Materials Database
Version 13.1
About this Document
Copyright NoticeAll of this documentation, and the software it describes, are copyrighted with all rights reserved. Under copyright laws, neither the documentation or the software may be copied, photocopied, reproduced in any way, translated, or converted into any machine-readable form or any electronic medium, in whole or in part, without express written permission from HBM United Kingdom Limited (HBM). Failure to obtain such permission may result in prosecution. The software suite that comprises nCode 13.1 (including GlyphWorks®, Automation®, VibeSys®, and DesignLife) and their component programs and files are the property of HBM. Please refer to the About screen in the software and the About folder in the nCode 13.1 installation and in the About folder in the nCode Automation installation for details on third party software used and respective licenses and/or copyright notices.
nCode 13.1 is protected under copyright law and is licensed for use only by a user who has obtained the necessary license, or in the case of a multi-user license may only be used by up to the maximum number of users specified in the license agreement. The sale, lease, hire rental, or any other reassign-ment of the product to, or by, a third party without the prior written consent of HBM is expressly forbid-den.
© 2017 HBM United Kingdom Limited. All worldwide rights reserved.
GlyphWorks® is a registered trademark of HBM.
All other trademarks are the property of their respective owners.
Warranty NoticeWhile HBM makes the product as reliable as is reasonably possible, HBM does not warrant that the product will function properly under all hardware platforms or software environments. Certain combi-nations of third party software and/or manufacturers modifications to hardware and software may impact upon the operation of HBM software.
HBM has tested the software and reviewed the documentation but HBM makes no warranty, implicit or explicit, with respect to the product, its quality, performance, merchantability, or fitness for a specific usage. This software and documentation are licensed “as is” and you—the licensee—assume the entire risk as to their quality and performance when you use the product.
Liability NoticeHBM will not be liable for damages arising from the results, direct or indirect, special, incidental, or con-sequential, of the licensee's usage or misusage of the product, even if advised of the possibility of such damages. In particular, and without prejudice to the foregoing, HBM has no liability for any programs or data stored or used with HBM software, including the costs of recovering such programs or data.
FeedbackWe value your feedback. If you have any documentation questions, comments, or concerns, please e-mail us at: [email protected]
Customer SupportFor issues involving the installation or use of your software, please e-mail us at: [email protected]
or use the nCode website, www.ncode.com, to find support information for your country.
3 nCode Premium Materials Database NC-PR-DB 13.10.001
Table of contents
Overview .................................................................................................................................................................. 5Availability of Premium Database ................................................................................................................ 5Materials in nCode_Premium - Steel and Cast Iron ......................................... ...................6Materials in nCode_Premium - Aluminium/Titanium/Magnesium
/Bronze/Copper/Nickel ................................. ...................7Material Names and Corresponding Specifications ........................................ ...................8
DesignLife User Guide 4 NC-DL 13.10.001
List of Tables
Table 1 Materials in nCode_Premium - Steel and Cast Iron.............................................................. 6Table 2 Materials in nCode_Premium - Aluminium/Titanium/Magnesium
/Bronze/Copper/Nickel..................................................................................................................... 7Table 3 Material Names and Corresponding Specifications ............................................................. 8
5 nCode Premium Materials Database NC-PR-DB 13.10.001
nCode Premium Materials Database
Overview
The Premium Materials Database contains fatigue properties measured on materials tested at the ISO-9001 certified Advanced Materials Characterisation and Test Facility owned and oper-ated by HBM nCode. This unprecedented collection of fatigue properties contains 126 materi-als, mostly commonly used types of steel and aluminium, plus some other non-ferrous materials. The high quality fatigue parameters include statistical estimates of scatter to enable reliability and certainty of survival to be assessed.
Because HBM nCode recognise the difficulty of producing universally understood names, the database also includes a list of searchable equivalents.
The comparison of standards from different international organisations is complex. There are names shared by several standards bodies and in this case it is possible to provide exact mate-rial equivalents. For others the material may share the same alloy family basis, but with detail compositional or microstructural differences, and with static properties which overlap those of the material as measured. Such materials could be considered comparable but not equivalent. The detail of the procedure and sources employed is provided in the manual accompanying the database.
It is the recommendation of HBM nCode that if the closest fatigue estimation is required for design, then the material parameters which should be used are those from material tested in the exact condition: This means composition, manufacturing route, and heat treatment condi-tion (including strength) as used. This should ideally come from test coupons machined from an actual component.
Availability of Premium Database
The new Premium Materials Database for fatigue properties is available exclusively to nCode CDS™ users in nCode 13.1. Each analysis job referencing the database will draw an additional 150 CDS units.
The database is distributed with the standard nCode software as nCode_Premium.mxd in the mats folder.
nCode Premium Materials Database 6 NC-PR-DB 13.10.001
These steel, cast iron, aluminium, titanium and magnesium specifications are available:
Table 1 Materials in nCode_Premium - Steel and Cast Iron
Materials in nCode_Premium - Steel and Cast Iron
100Cr6 Steel BS970 080M40 Steel EN10204 3.2 EH36 Steel
13-8 PH Stainless Steel BS970 212A42 Steel Hardox 400
21CrMoV5-7 Steel BS970 605M36 Steel HR1 Steel
2205 Duplex Stainless Steel BS970 655M13 Steel As-received HR340 Steel (1.6mm)
40CrNiMo Steel BS970 709M40 Steel T Condition HR340 Steel (2.0 mm)
409 Stainless Steel Sheet; Longl BS970 817M40 Steel Normalised Nitronic 60 Stainless Steel
409 Stainless Steel Sheet; Trans BS970 817M40 Steel T Condition Ovako 225A Steel
AISI 4140 Steel; Modified BS970 835M30 Steel Ovako 277Q Steel
AISI 4140 Steel BS970 En19 Steel T Condition Ovako 677 Steel
AISI 4145H Mod Steel BS970 En25 Steel SAE 8620H - As-rolled
AISI 4330V Steel BS970 En45 Steel SAE J2340 700R Steel
AISI 4330v Steel (New) C55 Steel SPHN440R - DS Steel
ASTM B166 Inconel 600 C70 Steel SPHN540R - DS Steel
Boehler VMR W403 Steel Corten B Steel Longl USI RW450 Steel
Boehler W302 Isobloc Steel Corten B Steel Trans USI RW500 Steel
Boehler W302 Isodisc Steel CR180P Steel X3CrNiMo 13-4 Stainless
BS Aerospace 5 S99 Steel CR210P Steel
BS EN10025 Grade S275JR Steel Longl CR3 Steel
BS EN10025 Grade S275JR Steel Trans CR340 Steel
BS EN10025 Grade S355J2 Steel Longl CR4 Steel
BS EN10025 Grade S355J2 Steel Trans DC01 Steel Cast Iron
BS EN10025 Grade S355J2_12mm Steel Longl DC05 Steel (1mm) FCD450-10 Cast Iron
BS EN10025 Grade S355J2_12mm Steel Trans DC05 Steel (2mm) GJS400-18 Cast Iron
BS EN10025 Grade S355JR Steel Longl DC05 Steel (3mm) GJS500 Cast Iron
BS EN10025 Grade S355JR Steel Trans Docol 900M Steel - Longl GJS600 Cast Iron
BS EN10088-3 X2CrNiMo17-12-2 Stainless Steel Docol 900M Steel - Trans
BS EN10088-3 X5CrNi18-9 Stainless Steel Docol 1000DP Steel; Longl
BS EN10088-3 X6CrNiTi18-10 Stainless Steel Docol 1000DP Steel; Trans
BS EN10088-3 X8CrNiS18-9 Stainless Steel Domex 700MC Steel; Longl
BS3100 Grade A4 Cast Steel Domex 700MC Steel; Trans
BS4360 Grade 40A Steel Domex 960 Steel Longl
BS4360 Grade 50A Steel Domex 960 Steel Trans
7 nCode Premium Materials Database NC-PR-DB 13.10.001
Table 2 Materials in nCode_Premium - Aluminium/Titanium/Magnesium/Bronze/Copper/Nickel
Materials in nCode_Premium - Aluminium/Titanium/Magnesium/Bronze/Copper/Nickel
2024 - T851 Aluminium Alloy - Longl Titanium
2024 - T851 Aluminium Alloy – Trans Ti6Al4V - bar
AA 1050-H14 Aluminium Alloy Longl Ti6Al4V - Sheet
AA 1050-H14 Aluminium Alloy Trans
AA 2014-T651 Aluminium Alloy Magnesium
AA 2014A - T 6511 Aluminium Alloy AZ61AF Magnesium Alloy
AA 2024 Aluminium Alloy AZ91D Magnesium Alloy
AA 2124-T851 Aluminium Alloy MgAl2Mn Magnesium Alloy
AA 5083 Aluminium Alloy MgAl4Mn Magnesium Alloy
AA 5251-H22 Aluminium Alloy MgAl5Mn Magnesium Alloy
AA 5251-H22 Aluminium Alloy Longl MgAl6Mn Magnesium Alloy
AA 5251-H22 Aluminium Alloy Trans
AA 6061-T6511 Aluminium Alloy Bronze
AA 6063-T6 Aluminium Alloy Aluminium Bronze Def Std D833
AA 6082-T6 Aluminium Alloy CW451K Phosphor Bronze
AA 7049-T73 Aluminium Alloy AMS4625G Phosphor Bronze
AA 7050-T74 Aluminium Alloy
AA 7050-T7451 Aluminium Alloy Copper
AA 7050-T7651 Aluminium Alloy C106 OFHC Copper
AA 7075 - T7351 Aluminium Alloy
AA 7075-T73 Aluminium Alloy Nickel
AA 7175-T74 Aluminium Alloy Monel 400 20pcld
AlMg5Si2Mn Cast Aluminium Alloy
AlSi9Cu3 Cast Aluminium Alloy
AlSi9Cu3Fe Cast Aluminium Alloy
C355 Cast Aluminium Alloy
LM27 As Cast Aluminium Alloy
LM27M Cast Aluminium Alloy
LM27TF Cast Aluminium Alloy
8 nCode Premium Materials Database NC-PR-DB Version 5
Material Names and Corresponding Specifications
Table 3 Material Names and Corresponding Specifications
Note Fatigue properties may not be identical between the equivalent specifications.
If a specification is marked by an asterisk, then it is not an exact equivalent. For example 40CrNiMo Steel > WNR Specification = 1.6562*.
Material ISO WNR EN UNS BS US DIN NF JIS Trade Name
100Cr6 Steel ISO 4957 (12/1999) 102Cr8
1.2067 EN 10132-4 (02/2000 + AC 12/2002)
T61203 BS EN 10132-4 (02/2000 + AC 12/2002) 102Cr6
102Cr6 and 100Cr6
AFNOR NF EN 10132-4 (02/2000 + AC 12/2002) 102Cr6 and AFNOR NF A 35-590 (1992) 100Cr6
JIS G 4805 (2008) SUJ 2
13-8 PH Stain-less Steel
S13800 AMS 5629 & ASTM A564
21CrMoV5-7 Steel
1.7709 EN 10269 (04/2006) 21CrMoV5-7
21CrMoV5-7
BS EN 10269 (04/2006) 21CrMoV5-7
DIN EN 10269 (04/2006) 21CrMoV5-7
AFNOR NF EN 10269 (04/2006) 21CrMoV5-7
56 TG, BGH 7709, DE 7709, Remy 1.7709
2205 Duplex Stainless Steel
1.4462 EN 10083:part3:2005 1.4462
S32205 BS 970 318S13
ASTM S31803 or S32205
X2CrNiMoN 22 5 3
Z3 CND 22-05 Az
40CrNiMo Steel
ISO 14737 (2003) G35CrNiMo6-6
1.6562* G43370 BS970 817M40
ASTM E 4340
G4053:2003 Grade SNCM 439
AA 1050-H14 Aluminium Alloy Longl
3.0255 EN 485-1 A91050 1050A to BS1474
AA 1050-H14
Al99.5 to DIN 1725-1
A5 A1050
AA 1050-H14 Aluminium Alloy Trans
3.0255 EN 485-1 A91050 1050A to BS1474
AA 1050-H14
Al99.5 to DIN 1725-1
A5
AA 2014-T651 Aluminium Alloy
AlCu4SiMg 3.1255 EN AW-2014
A92014 BS 2L93 2014-T651 AlCuSiMn A 2014 BE
AA 2014A - T 6511 Alumin-ium Alloy
AlCu4SiMg 3.1255 EN AW-2014
A92014 BS 2L93 2014-T6511 AlCuSiMn A 2014 BE
AA 2024 Alu-minium Alloy
AlCu4Mg1 3.1355 EN AW-2024
A92024 BS 2L97 2024 AlCuMg2 A-U4G1 A 2024 BE
AA 2124-T851 Aluminium Alloy
AlCu4Mg1 3.1354 EN2422 A92124 AA2124-T851 AMS 4101, AMS QQ-A-250/29, ASTM B209
AA 5083 Alu-minium Alloy
AlMg4.5Mn0.7 3.3547 EN AW-5083
A95083 NE8 5083 5083 A 5083 BE
nCode Premium Materials Database 9 NC-PR-DB Version 5
AA 5251-H22 Aluminium Alloy
ISO 6361-2 5251
3.3525 EN AW-5251
A95251 BS EN AW-5251
5251-H22 AlMg2Mn0.3
A-G2M A 5251T
AA 5251-H22 Aluminium Alloy Longl
ISO 6361-2 5251
3.3525 EN AW-5251
A95251 BS EN AW-5251
5251-H22 AlMg2Mn0,3
A-G2M A 5251T
AA 5251-H22 Aluminium Alloy Trans
ISO 6361-2 5251
3.3525 EN AW-5251
A95251 BS EN AW-5251
5251-H22 AlMg2Mn0,3
A-G2M A 5251T
AA 6061-T6511 Alumin-ium Alloy
AlMg1SiCu 3.3211 A96061 6061 AA 6061-T6511
AlMg1SiCu 6061 A6061
AA 6063-T6 Aluminium Alloy
AlMg0.7Si EN AW-6063
A96063 HE9 6063 A 6063 BE
AA 6082-T6 Aluminium Alloy
AlSi1MgMn 3.2315 AA-6082 A96082 6082 AA 6082-T6 AlMgSi
AA 7049-T73 Aluminium Alloy
AlZn8MgCu A97049 AA 7049-T73 AA 7049-T73, AMS 4111
AA 7050-T74 Aluminium Alloy
AlZn6CuMgZr 3.4144 A97050 AA 7050-T74 AA 7050-T74
AA 7050-T7451 Alumin-ium Alloy
AlZn6CuMgZr 3.4144 A97050 AA7050-T7451
AA7050-T7451, AMS 4050H
AA 7050-T7651 Alumin-ium Alloy
AlZn6CuMgZr 3.4144 A97050 AA7050-T7651
AA7050-T7651, AMS4201F-2014
AA 7075 - T 7351 Alumin-ium Alloy
Zn6MgCu 3.4365 EN AW-7075
A97075 AA 7075 - T 7351
AA 7075 - T 7351
AlZnMg-Cu1,5
AA 7075-T73 Aluminium Alloy
Zn6MgCu 3.4365 EN AW-7075
A97075 AA 7075-T73 AA 7075-T73
AlZnMg-Cu1,5
AA 7175-T74 Aluminium Alloy
AlZn5.5MgCu 3.4334 A97175 AA 7175-T74 AA 7175-T74, AMS4149
AISI 4140 Steel ISO 683-18 (1996) Grade 42CrMo4
1.7225 EN 10083-3 (08/2006) Grade 42CrMo4
G41400 BS EN 10083-3 (08/2006) Grade 42CrMo4
SAE 4140 (AISI 4140)
DIN EN 10083-3 (01/2007) Grade 42CrMo4
NF EN 10083-3 (08/2006) Grade 42CrMo4
JIS G 4052 (2008) Grade SCM 440H
AISI 4145H Mod Steel
ISO 683-18 42CrMo4
1.7225 EN 10083-1 42CrMo4
H41450 BS 970 En19, En 19A, 709M40
AISI 4145H 42CrMo4 42 CD 4* JIS G 4053 SCM 440
AISI 4330V Steel
K23080 SAE 4330 mod
4330+V VAC-ARC
AISI 4330V Steel (New)
K23080 SAE 4330 mod
4330+V VAC-ARC
Material ISO WNR EN UNS BS US DIN NF JIS Trade Name (Continued)
10 nCode Premium Materials Database NC-PR-DB Version 5
AlMg5Si2Mn Cast Alumin-ium Alloy
AlMg5Si2Mn EN AB-51500
Magsimal 59
AlSi9Cu3 Cast Aluminium Alloy
AlSi8Cu3 3.2163.01 EN AB-46200
G-AlSi9Cu3 AC4B
AlSi9Cu3Fe Cast Alumin-ium Alloy
AlSi9Cu3(Fe) EN AB-46000
G-AlSi9-Cu3(Fe)
Al-Bronze Def Std D833
*CuAl10Fe5Ni5-GC to ISO 1338:1977
2.0966 *CW304G C63000 *CA105 to BS 2875
C63000 2.0966 NFL 14705 / NF A 51-115
*C6301 to JIS H 3100
AZ61AF Mag-nesium AlloyAZ91D Mag-nesium Alloy
EN 1753 MC21120
M11916 ASTM B94 AZ91D
H2222 and H5303 MD11D
AZ91D
Boehler VMR W403 Steel
Boehler VMR W403
Boehler W302 Isobloc Steel
Boehler W302 Isob-loc
Boehler W302 Isodisc Steel
Boehler W302 Iso-disc
BS Aerospace 5 S99 Steel
1.6944* G43370 BS Aerospace 5 S 99
AISI 4337 SAE 4335 (mod)
40Ni-MoCr10-5 (W.Nr. 1.6745)
30 NCD 16 (W. Nr. 1.6604*)
BS EN10025 Grade S275JR Steel Longl
1.0044 EN 10025:part2:2004 Grade S275JR
BS EN 10025:part2:2004 Grade S275JR
St44-2
BS EN10025 Grade S275JR Steel Trans
1.0044 EN 10025:part2:2004 Grade S275JR
BS EN 10025:part2:2004 Grade S275JR
St44-2
BS EN10025 Grade S355J2 Steel Longl
1.057 EN 10025:part2:2004 Grade S355J2
BS EN 10025:part2:2004 Grade S355J2
Fe 510 D1 FF (St 52-3)
E 36-4 SM 520B
BS EN10025 Grade S355J2 Steel Trans
1.057 EN 10025:part2:2004 Grade S355J2
BS EN 10025:part2:2004 Grade S355J2
Fe 510 D1 FF (St 52-3)
E 36-4 SM 520B
BS EN10025 Grade S355J2_12mm Steel Longl
1.057 EN 10025_part2:2004 Grade S355J2
BS EN 10025_part2:2004 Grade S355J2
Fe 510 D1 FF (St 52-3)
E 36-4 SM 520B
BS EN10025 Grade S355J2_12mm Steel Trans
1.057 EN 10025:part2:2004 Grade S355J2
BS EN 10025_part2:2004 Grade S355J2
Fe 510 D1 FF (St 52-3)
E 36-4 SM 520B
Material ISO WNR EN UNS BS US DIN NF JIS Trade Name (Continued)
nCode Premium Materials Database 11 NC-PR-DB Version 5
BS EN10025 Grade S355JR Steel Longl
1.0045 EN 10025:part2:2004 Grade S355JR
BS EN 10025:part2:2004 Grade S355JR
BS EN10025 Grade S355JR Steel Trans
1.0045 EN 10025:part2:2004 Grade S355JR
BS EN 10025:part2:2004 Grade S355JR
BS EN10088-3 X2CrNiMo17-12-2 Stainless Steel
ISO 16143-2 (2004) X2CrNi-Mo17-12-2*
1.4404 EN 10088-3 (6/2005) X2CrNi-Mo17-12-2
S31603* BS EN 10088-3 (6/2005) X2CrNiMo17-12-2
AISI/SAE 316L
DIN EN 10088-3 (6/2005) X2CrNi-Mo17-12-2
NF EN 10088-3 (6/2005) X2CrNi-Mo17-12-2
JIS G 4303 (2005) SUS 316L*
IMCO316L
BS EN10088-3 X5CrNi18-9 Stainless Steel
ISO 16143-2 (2004) X5CrNi18-9*
1.4307 (also meets 1.4301)
EN 10083-3 (6/2005) X5CrNi18-9
S30403* BS EN 10083-3 (6/2005) X5CrNi18-9
AISI/SAE 304L
DIN EN 10083-3 (6/2005) X5CrNi18-9
NF EN 10083-3 (6/2005) X5CrNi18-9
JIS G 4303 (2005) SUS304L*
Roldamax - 229
BS EN10088-3 X6CrNiTi18-10 Stainless Steel
ISO 16143-2 (2004) X6CrNi-Ti18-10 *
1.4541 EN 10088-3: 2005 X6CrNi-Ti18-10
S32100 * BS EN 10088-3 (6/2005) X6CrNiTi18-10
AISI/SAE 321
DIN EN 10088-3 (6/2005) X6CrNiTi18-10
AFNOR NF EN 10088-3 (6/2005) X6CrNiTi18-10
JIS G 4303 (2005) SUS321 *
Valbruna VALSTOCK 2010 1.451/321 A
BS EN10088-3 X8CrNiS18-9 Stainless Steel
ISO 16143-2 (2004) X10CrNiS18-9 *
1.4305 EN 10088-3 (6/2005) X8CrNiS18-9
S30300 BS EN 10088-3 (6/2005) X8CrNiS18-9
AISI/SAE 303/303L
DIN EN 10088-3 (6/2005) X8CrNiS18-9
AFNOR NF EN 10088-3 (6/2005) X8CrNiS18-9
JIS G 4303 (2005) SUS 303
BS3100 Grade A4 Cast Steel
AISI C1027
BS4360 Grade 40A Steel
EN 10025:1993 Grade S235
BS EN 10025:1993 Grade S235
BS4360 Grade 50A Steel
EN 10025:1993 Grade S355
BS EN 10025:1993 Grade S355
BS970 080M40 Steel
1.1186 BS 970 080M40
AISI/SAE1040
C40E
BS970 212A42 Steel
1.0727 En 10277:part3:
BS970 212A42
SAE1141 46S20 45MF4 BGOH727
BS970 605M36 Steel
BS970 En16 Normalised
BS970 655M13 Steel As-received
ISO 683-11 (1987) 15NiCr13
1.5752 EN 10084 (6/2008) 15NiCr13
UNS G33106 *
BS EN 10084 (6/2008) 15NiCr13
DIN EN 10084 (6/2008) 15NiCr13
AFNOR NF EN 10084 (6/2008) 15NiCr13
JIS G4053 (2008) SNC815 *
BS 970 Part1 (1996) 655M13, EN36A
BS970 709M40 Steel T Condi-tion
1.7225 EN 10083:part 3
BS 970 709M40
42CrMo4 42 CD 4*
BS970 817M40 Steel Nor-malised
1.6562* EN 10083:part1:1991 Grade 817M40
BS EN 10083:part1:1991 Grade 817M40 "N" Condition
SAE 4337 (SAE4340*)
34CrNiMo6 34CrNiMo8 (35NCD6*)
Monix 15
Material ISO WNR EN UNS BS US DIN NF JIS Trade Name (Continued)
12 nCode Premium Materials Database NC-PR-DB Version 5
BS970 817M40 Steel T Condi-tion
1.6562* EN 10083:part1:1991 Grade 817M40
BS EN 10083:part1:1991 Grade 817M40 "T" Condition
SAE 4337 (SAE4340*)
34CrNiMo6 34CrNiMo8 (35NCD6*)
Monix 15
BS970 835M30 Steel
1.6773 BS 970 835M30
36NiCrMo16
BS970 En19 Steel T Condi-tion
1.7225 EN 10083:part 3
BS 970 709M40
42CrMo4 42 CD 4*
BS970 En25 Steel
1.6743 32NiCrMo10-4
BGH 6743 BS 970-3: 1991 826M31, BS Aerospace S153*, S154
32NiCrMo10-4
BGH 6743
BS970 En45 Steel
1.5026 EN 10089 (12/2002) 56Si7
G92550 BS 970 251A58
SAE J 1249 (2008) 9255
AFNOR NF A35-571 (1996) 56 SC 7
C355 Cast Alu-minium Alloy
AlSi5Cu1Mg EN AC-45300
A03550 LM16 C355.0 AC4D.1
C55 Steel ISO 683-18 (1996) C55*
1.0535 EN 10083-2 (08/2006) C55
BS970 Pt3 (1991) 080M50 or En43A
DIN EN 10083-2 (10/2006) C55
AFNOR NF EN 10083-2 (08/2006) C55 or AFNOR NF A 35-552-2
S 55 C-CSP
C70 Steel 1.1249 C70G C70Corten B Steel LonglCorten B Steel TransCR180P Steel GWM3032
M-ST-S CR180P
CR210P Steel GWM3032M-ST-S CR210P
CR3 Steel ISO 3574 (2012) Grade CR3*
GWM2M-ST-S CR3
CR340 Steel ISO 13887 (2011) 340Y*
1.0548 EN 10268 (10/2006) HC340LA
BS EN 10268 (7/2006) HC340LA
ASTM A 1008-11 (HSLAS Grade 50 (340) Class 1)
DIN EN 10268 (10/2006) HC340LA
AFNOR NF EN 10268 (7/2006) HC340LA
SPFC490* GWM3032M-ST-S CR340
CR4 Steel ISO 3574 (2012) Grade CR4*
GWM2M-ST-S CR4
CW451K Phos-phor Bronze
Material ISO WNR EN UNS BS US DIN NF JIS Trade Name (Continued)
nCode Premium Materials Database 13 NC-PR-DB Version 5
DC01 Steel ISO 3574 (2012) Grade CR1
1.033 EN 10130 (02/2007)
G10080 BS EN 10130 (12/2006)
AISI 1008 DIN EN 10130 (02/2007)
Afnor NF EN 10130 (12/2006)
JIS G 3141 (2011) Grade SPCC
DC05 Steel (1mm)
1.0312 EN 10130 Grade DC05
BS EN 10130 Grade DC05
FeP05 (DIN 1623 Part 1 St 15)
DC05 Steel (2mm)
1.0312 EN 10130 Grade DC05
BS EN 10130 Grade DC05
FeP05 (DIN 1623 Part 1 St 15)
DC05 Steel (3mm)
1.0312 EN 10130 Grade DC05
BS EN 10130 Grade DC05
FeP05 (DIN 1623 Part 1 St 15)
Domex 960 Steel LonglDomex 960 Steel TransDocol 900M Steel - Longl
Docol 900M
Docol 900M Steel - Trans
Docol 900M
FCD450-10 Cast Iron
JS 450-10/S 5.3107 EN GJS-450-10
F33100 ASTM A536 65-45-12
Old NF A 32-201 Grade FGS350-22
FCD450-10
GJS400-18 Cast Iron
EN GJS-400-18
FCD 400-18
GJS500 Cast Iron
EN-GJS-500-7
EN-GJS-500-7 EN-GJS-500-7
ENGJS-500-7
GJS600 Cast Iron
JS600-3/S EN-GJS-600-3
EN-GJS-600-3 EN-GJS-600-3
EN-GJS-600-3
FCD 600-3
Hardox 400 Hardox400HR1 Steel GWM2M-
ST-S HR1HR340 Steel (1.6mm)
GWM3032M-ST-S HR340
HR340 Steel (2.0 mm)
GWM3032M-ST-S HR340
LM27 As Cast Aluminium Alloy
EN AB-46400
A03280 LM27 328
LM27M Cast Aluminium Alloy
EN AB-46400
A03280 LM27 328
LM27TF Cast Aluminium Alloy
EN AB-46400
A03280 LM27 328
MgAl2Mn Magnesium Alloy
ISO 16220:2005 MgAl2Mn
EN 1753 AM20
AM20
Material ISO WNR EN UNS BS US DIN NF JIS Trade Name (Continued)
14 nCode Premium Materials Database NC-PR-DB Version 5
MgAl4Mn Magnesium Alloy
AM40
MgAl5Mn Magnesium Alloy
ISO 16220:2005 MgAl5Mn
EN 1753 MC21220
AM50
MgAl6Mn Magnesium Alloy
3.5662 EN 1753 MC21230
M10602 AM60B
Nitronic 60 Stainless Steel
S21800 AMS 5848D Nitronic 60, Gall-Tough Plus
Ovako 225A Steel
Ovako 225A
Ovako 277Q Steel
Ovako 277Q
Ovako 677 Steel
Ovako 677
SAE 8620H - As-rolled
ISO 683-18 20NiCrMoS2
1.6526 EN 10277-4 20NiCrMoS2-2
H86200 BS EN 10277-4 20NiCrMoS2-2
ASTM A 304-11 8620H
DIN EN 10277-4 20NiCrMoS2-2
NF EN 10277-4 20NiCrMoS2-2
JIS G 4052 SNCM 220H
SAE J2340 700R SteelSPHN440R - DS SteelSPHN540R - DS SteelTi6Al4V - bar 3.7164 R56400 BS 3TA
11:2009AMS 4928 T-A6V IMI 318
Ti6Al4V - Sheet
3.7164 EN 10204-3.1
R56400 AMS 4911 IMI 318
USI RW450 SteelUSI RW500 SteelX3CrNiMo 13-4 Stainless Steel
Material ISO WNR EN UNS BS US DIN NF JIS Trade Name (Continued)
nCode Premium Materials Database 15 NC-PR-DB Version 5
© HBM United Kingdom Limited. All rights reserved. All details describe our products in general form only. They are not to be understood as express war-ranty and do not constitute any liability whatsoever.
HBM - nCode
26555 Evergreen Road - Suite 700 -Southfield, MI 48076 - USATel. +1 248 350 8300 - Fax: +1 248 350 1678Email: [email protected] - www.ncode.com
measure and predict with confidence