ncbeldatasheet5
TRANSCRIPT
-
7/31/2019 NCBELDatasheet5
1/2
Network Combiner NCB/ELConnectivity for Ethernet LANs & WANs
Usage
The NCB-EL Network Combiner is amember of CTI Product's growing family of WON Wide Operating Network devicesthat, when used in conjunction with an
Ethernet LAN & WAN, allows multipleLONW ORKS networks to be connected inreal time, using the Ethernet TCP/IPnetwork to extend the networks.
Features
LonWorks Router for Ethernet - TCP/IP
Connect multiple LonWorks networks
into a unified network using EthernetTCP/IP LAN/WAN Backbone
Supports Unicast and Multicast IPAddressing modes as well as Unicast-Replicated,
LONWORKS Router technology Full L ONW ORKS system
interoperability is maintained. Supports all L ONT ALK protocol
message services. Configured with standard L ONW ORKS
network management tools. Subnet and group segmentation can
be used to maximize networkperformance.
Fully Interoperable Peer-to-Peer Communication Via EthernetBackbone
Any node can communicate with anyother node, regardless of the locationof each.
No complex custom software towrite, debug, or maintain.
No system node application codechanges needed.
Perform Remote System DiagnosticsVia Ethernet Backbone
Remote Protocol Analysis Remote Network Installation
Updates (Bindings, etc.) Remote Code Download
Built-in Ethernet Media Support: 10BaseT AUI
Supports standard L ON WORKStransceivers:
FTT10A, TP/XF78 & 1250, LPT-10 SMX transceivers including power
line and RS485.
Typical Applications: Building Automation HVAC Utilities Security & Access Control
Industrial Automation Remote Monitoring/Control Remote Diagnostics
TI Products, Inc.11 West Sharon Roadncinnati, Ohio 45240SA
one
.513.595.5900
x
.513.595.5983
mail
ww.ctiproducts.com
NCB-EtherlonNetwork
Combiner
-
7/31/2019 NCBELDatasheet5
2/2
NCB-Etherlon Network Combiner NCB/EL
Specifications subject to change without notice.
NCB, NCB-EL, NCB-Etherlon and WON are trademarks of CTI Products, Inc.
Echelon, LON, LNS, L ONBUILDER , LONT ALK, LONWORKS , LonMark,
and Neuron are U.S. Registered trademarks of Echelon Corporation NCB-EL5
NCB /EL !!! ! Specifications: EtherlonPower: 10 to 30 VDC (10Base-T only)
15 to 30 VDC (AUI)Negative Ground, Externally Current Limited6 watts max. without SMX transceiver 11 watts max. with SMX PowerLine transceiver North American and International Power Supplies available.
Size: 7.5" D x 5.6" W x 1.6" HMounting: Desktop with integral non-slip feet
Wall mount or 19" rack mount with optional adapters
Temperature: 0-60
C
Humidity: 10-95% non-condensing
Listings: UL1459, CSA C22.2, EC EN60950
EMI: Complies with:FCC part 15 Class B,Industry Canada (IC) Class BEN55022 ,Class B (European Union)
EMC: Complies with EN50082-1 (European Union)
European: Carries the CE Mark
Transceivers Supported: FTT-10A, TPT/XF-78, TPT/XF-1250, SMX, RS485, PLT22Ethernet Media & 10Base-T (twisted pair)RJ 45
Connections Supported: AUI 15-pin D-sub female (10Base5)
Network Transport: UDP/IP over 10 Mbps Ethernet
IP Addressing Modes: Unicast, Multicast and Unicast-Replicated,
Configuration: LonTalk Router set as a repeater by factory default. Bridge,Configured, or Learning type set using standard L ONW ORKS networkmanagement tools capable of configuring routers. LNS plug-in providedfor configuration of IP parameters.
CTI Products, Inc.1211 W. Sharon Road, Cincinnati, OH 45240 USAPhone: +1 513-595-5900 Fax: +1 513-595-5983Email: [email protected]: www.ctiproducts.com