nba sar ce amal jothi clg
TRANSCRIPT
-
7/25/2019 NBA SAR CE Amal Jothi Clg
1/355
SELF ASSESSMENT REPORT (SAR)
FOR ACCREDITATION OF
UG ENGINEERING (Civil) PROGRAMME
(TIER-II)
Submitted to
NATIONAL BOARD OF ACCREDITATION
New Delhi
AMAL JYOTHI COLLEGE OF ENGINEERING
Koovappally P. O., Kanjirappally
Kottayam District., Kerala
September 2015
-
7/25/2019 NBA SAR CE Amal Jothi Clg
2/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 2
Contents
Title Page No.
PART- A
1. Institutional Information 3
2. Departmental Information 11
3. Programme Specific Information 15
PART- B
1. Vision, Mission and Programme Educational Objectives 17
2. Programme Outcomes 30
3. Programme Curriculum 96
4. Students Performance 108
5. Faculty Contributions 121
6. Facilities and Technical Support 139
7. Academic Support Units and Teaching-Learning Process 159
8. Governance, Institutional Support and Financial Resources 187
9. Continuous Improvement 203
Declaration 212
-
7/25/2019 NBA SAR CE Amal Jothi Clg
3/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 3
SelfAssessment Report (SAR)
Part A
I. Institutional Information
1.1. Name and address of the institution and affi li ating university:
(Instruction: The name, address of the institution, and the name of the university which
has given affiliation to this institution, are to be listed here.)
Amal Jyothi College of Engineering
Koovappally P.O., Kanjirappally,
Kottayam Dst, Kerala.
PIN 686518
Affiliating Universities: Mahatma Gandhi University, Kottayam 686
560/ Kerala Technological University, Trivandrum, Kerala.
Senior three batches are affiliated to Mahatma Gandhi University and the current first
year batch (2015-16) to Kerala Technological University.
I .2. Name, designati on, telephone number, and emai l address of the contact person
for the NBA:
(Instruction: The name of the contact person, with other details, has to be listed here.)
Rev. Fr. Dr. Jose Kannampuzha
Principal
Telephones: 04282-305503; R: 048282-51136; M: 09447870275
E-Mail:[email protected]
1.3. History of the institu tion(including the date of introduction and number of seats of
various programmes of study along with the NBA accreditation, if any) in tabular
form:
(Instruction: History of the institution and its chronological development
along with the records of past accreditation need to be listed here.
-
7/25/2019 NBA SAR CE Amal Jothi Clg
4/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 4
Year Description
2001
Institution established with the following programmes (intake)
B. Tech. Computer Science and Engineering (45)B. Tech. Electrical and Electronics Engineering (45)
B. Tech. Information Technology (45)
B. Tech. Electronics and Communication Engineering (45)
2002
Intake of B. Tech. CSE increased (60)
Intake of B. Tech. EEE increased (60)
Intake of B. Tech. IT increased (60)
Intake of B. Tech. ECE increased (60)
2004 Intake of B. Tech. ECE increased (90)
2005Started
B. Tech. in Mechanical Engineering (60)
2006
Started
B. Tech Civil Engineering (60)
Intake of B. Tech. ECE increased (120)
2008
NBA accreditation visits and accreditation for
B. Tech. Electronics and Communication Engineering, and
B. Tech. Electrical and Electronics Engineering
Started MCA Programme (60)
Started M. Tech. Communication Engg (18)
2009Intake of B. Tech. CSE increased (90)
Intake of B. Tech. ME increased (90)
-
7/25/2019 NBA SAR CE Amal Jothi Clg
5/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 5
2010
Started
B. Tech. Automobile Engineering (60)
M. Tech. Machine Design (18)
M. Tech. Communication Engineering (24)
M. Tech. in Power Electronics & Power systems (18)
MCA lateral entry (60)
Intake of B. Tech. Civil Engineering increased (90)
2011
Started
M. Tech. Computer Science (18)
Intake of B. Tech. Mechanical Engineeringincreased (120)
2012
Started
B. Tech. Metallurgy (60)
M. Tech. (Civil) Structural Engg. & Construction Management (24)
Intake of B. Tech. Civil Engineering increased (120)
2013
Started
B. Tech. Chemical Engineering (60)
M. Tech. Energy Systems (18)
Intake of B. Tech. CSE increased (120)
Intake of M. Tech. CSE increased (24)
2014
Started
MCA Dual Degree (60)
M. Tech. (Civil) Computer aided structural design (24)
2015 Started M. Tech. in Nanotechnology (24)
-
7/25/2019 NBA SAR CE Amal Jothi Clg
6/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 6
1.4. Ownershi p status: Govt. (central/state) / trust/ society (Govt./NGO/Private)/Private/
other:
(Instruction: Ownership status of the institute has to be listed here.)
Private
Managed by the Catholic Diocese of Kanjirappally, Kottayam, Kerala1.5. Mi ssion and Vision of the Instituti on:
(The institution needs to specify its Mission and Vision).
Vision
To be a center of excellence in technical higher education, research and support services,
capable of making significant contribution to individual and societal empowerment.
Mission
To create technically qualified world-class professionals with social commitment through
Career- oriented courses conducted by high profile faculties, complemented with globally
Interactive learning processes and leading edge technology.
1.6. Organizational Structure:
(Organizational chart showing the hierarchy of academia and administration to be included)
ORGANIZATION STRUCTURE OF AJCE
-
7/25/2019 NBA SAR CE Amal Jothi Clg
7/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 7
1.7. Financial status: Govt. (central/state)/grants-in-aid/not-for-profit / private
self-financing / other:
(Instruction: Financial status of the institute has to be mentioned here.)
Private self-financing
1.8. Natu re of the trust/society:
(Instruction: Way of functioning and activities of the trust/society have to be listed here.)
Diocesan Educational Trust, Kanjirapally having its office at Pastoral Centre,
Kanjirappally, Kanjirappally Panchayat, Ward IV, and Building No.533 is the promotingbody of the institution. The deed of the trust is made on 6th September, 2000 and
Professors Associate
Professors
Assistant
D E P A R T M E N T
Head of Department
Lab/Workshop
Superintendent
Lab/Workshopinstructors
Tradesmen
-
7/25/2019 NBA SAR CE Amal Jothi Clg
8/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 8
registered under # 254 /2000 /4. The trust is promoted by the catholic diocese of
Kanjirappally, a religious institution of the catholic denomination, which is a minority
community, engaged in charitable activities for the benefit of the public, irrespective of
caste, creed and community.
Also, list other institutions/colleges run by thet
rust/societyAmal Jyothi College of Engineering, Kanjirappally is the only institution under this
Trust.
I .9.External sour ces of funds:
(Instruction: The different sources of the external funds over the last three
financial years are to be listed here.)
(Amounts in Lakhs of Rs.)
Name of the
external source
CFY up to
31-12-2014
CFYm1
2013-14
CFYm2
2012-13
CFYm3
2011-12
Loan from Banks 3551 3235 2129 1399
I .10. I nternall y acquir ed funds:
(Instruction: The different sources of the internal funds over the last three financial
years are to be listed here.)
(Amounts in Lakhs of Rs.)
Name of the internal source CFY up to
31-12-2014
CFYm1
2013-14
CFYm2
2012-13
CFYm3
2011-12
Students fee 2387 2643 2260 1804
Refundable deposit 532 522 513 498
I .11 Were scholarships or any other f inancial assistance provided to students?
(Instruction: If any scholarship or financial assistance has been provided to
the students, then the detail of such assistance, over the last three financial
years, has to be listed here. Also, mention the basis for the award of such
scholarship).
Scholarships distributed to students are listed in the following Table
-
7/25/2019 NBA SAR CE Amal Jothi Clg
9/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 9
(All amounts in Lakhs of Rs.)
Name /Nature of scholarship
CFYm3
2011-2012
CFYm2
2012-2013
CFYm1
2013-2014
CFY
2014-15
No:
Amt Nos Amt Nos Amt No.s AmtTFW GOVT. 81 54.51 98 67.26 113 84.75 123 92.25
TFW MGMT 2 0.75 4 2.00 7 4.625
AJECS AJECS 39 6.15 43 11.30 14 4.26 11 0.38
MOMA- MCM GOVT. 19 5.65 125 34.60 136 39.925
CSS GOVT. 8 2.90
PG-GATE GOVT.
AICTE11 10.56 30 28.8 45 43.2
FISHERMENSCHOLARSHIP
GOVT 1 1.16
AJCE MERIT MGMT 32 0.48 49 0.49 22 0.22 38 0.45
AJCE MERIT
CUM MEANSMGMT
CEE-LOW
INCOMEMGMT 43 7.97 57 7.56
VATTAKKUNN
ELEF 4 0.075 4 0.075 4 0.075 4 0.08
LINSA ANNIE EF 2 0.1 2 0.1 2 0.1 2 0.10LUKES JOY EF 2 0.1 2 0.1 2 0.1 2 0.10
BALU S PILLAI EF 1 0.05 1 0.05 1 0.05
LIZ SIMON EF
SILVER
ORDINATION
EF 1 0.04
SARAMMA IPE
MEMORIALEF
RODRIGUES
MEMORIALEF 1 0.01
VENGAL IPE
MEMORIALEF 1 0.02
PROF.
VIJAYANSEF 1 0.02
TFW: Tuition fee waiver; MOMA: Ministry of Minority Affairs; CSS: Central Sector
Scholarships; MGMT: Management; MCM: Merit cum Means; EF: Endowment Fund
Basis of award of all the above scholarships: Merit or Merit cum annual income of parents.
-
7/25/2019 NBA SAR CE Amal Jothi Clg
10/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 10
I .12 Basic cri teri on for admission to the instituti on:
(Instruction: The basis/criteria for student intake has to be listed here.)
All India entrance / state-level entrance / university entrance / 12th standard mark
sheet/others:
State-level entrance: 50% of the seats are filled from the rank list published by the
Commissioner of Entrance Examinations, Government of Kerala. The other 50 % under
management quota are filled from the rank list prepared by adding the marks scored by
candidates in plus two examination 9 mathematics + Physics + Chemistry) and the marks
scored by them in the Entrance Examination conducted by the Commissioner of Entrance
Examinations, Government of Kerala.
I .13 Total number of engineer ing students:UG (B. Tech.) and PG (M. Tech.)
(Instruction: Total number of engineering students, both boys and girls, has to be listed
here. The data may be categorized in tabular form undergraduate or postgraduate
engineering, or other programme, if applicable.)
CAY CAYm1 CAYm2 CAYm3
Total no. ofboys: 1612 1516 1350 1187
Total no. of girls: 1157 1160 1119 1040
Total no. of students: 2769 2676 2469 2227
Total number of other students, if any: MCA
MCA StudentsCAY
2014-15
CAYm1
2013-2014
CAYm2
2012-13
CAYm3
2011-12
Total no. ofboys: 86 59 61 51
Total no. of girls: 166 108 112 78
Total no. of students: 252* 167 173 129
*2014 -15 MCA includes MCA (Dual Degree), MCA (Lateral Entry) & MCA (Regular)
I .14 Total number of employees
(Instruction: Total number of employees, both men and women, has to be listed here. The
data may be categorized in tabular form as teaching and supporting staff.)
Minimum and maximum number of staff on roll in the engineering institution, during the
CAY and the previous CAYs (1st July to 30th June):
-
7/25/2019 NBA SAR CE Amal Jothi Clg
11/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 11
A.Regular Staff
(Instruction: Staff strength, both teaching and non-teaching, over the last three academic
years has to be listed here.)
ItemsCAY CAYm1 CAYm2 CAYm3
Min Max Min Max Min Max Min Max
Teaching staff inengineering
M 104 117 116 96 103 100 95 104
F 81 81 76 68 80 80 69 74
Teaching staff
in science &
humanities
M 15 14 10 12 13 10 11 13
F 19 14 17 15 15 14 11 12
Non-teaching
staff
M 78 83 81 72 78 73 63 67
F 18 24 21 18 21 22 23 18
B.Contractual Staff
ItemsCAY CAYm1 CAYm2 CAYm3
Min Max Min Max Min Max Min Max
Teaching staff inengineering
M
F
Teaching staff in
science
&humanities
M
F
Non-teaching
staff
M 4 4 2 4 2 2 2 2
F
-
7/25/2019 NBA SAR CE Amal Jothi Clg
12/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 12
II. DepartmentalInformation
II.1. Name and address of the department:
DEPARTMENT OF CIVIL ENGINEERINGAMAL JYOTHI COLLEGE OFENGINEERING,
KOOVAPPALLY P.O., KANJIRAPPALLY
KOTTAYAM,
KERALA.
PIN: 686518
I I .2. Name, designation , telephone number, and email address of the contact person f or
the NBA:
SR. CLARAMMA ROSARYPROFESSOR & HEAD OF THE DEPARTMENT
TELEPHONE NUMBER: 04828 305563, 251661, 305500/555
FAX NO: 04828 251136; E MAIL:
II.3.H istory of the department including date of i ntroduction and number of seats
of various programmes of study along wi th the NBA accreditation, i f any:
Vision of the Department
To be the premier provider of practice oriented engineering education in the world at both
undergraduate and graduate levels, in order to achieve a successful career in academic,
research or industrial fields, by providing them with requisite technical background therebyensuring individual and societal empowerment.
Program Description
UG in Civil Engineering
Started with 60 seats in 2006
Intake increased to 90 in 2010
Intake increased to 120 in 2012
PG in
1. Structural Engineering and
Construction management
Started with 24 seats in 2012
2. Computer Aided Structural
Engineering
Started with 24 seats in 2014
-
7/25/2019 NBA SAR CE Amal Jothi Clg
13/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 13
Mission of the Department
To empower students and faculty as value added engineers with broad and thorough
education in Civil Engineering , fundamentals and application, so that they are capable of
facing the technical and social challenges and providing human services which are
sustainable and ensures environmental health.
I I .5. List of the programmes/ departments which share human resour ces and/or the
facilitiesof this department/programme (in %):
Subjects taken for S1 S2(13 batches)Hours/
week
Credits
S1 S2 AUE
Automobile Engineering
EN010 106Basic Civil
Engineering.3 4
S1 S2 CH
Chemical Engineering
EN010 106Basic Civil
Engineering.3 4
S1 S2 CSE A
Computer Science &
Engineering
EN010 106Basic Civil
Engineering.3 4
S1 S2 CSE B
Computer Science &
Engineering
EN010 106Basic Civil
Engineering.3 4
S1 S2 ECE AElectronics & Communication
Engineering
EN010 106Basic Civil
Engineering.3 4
S1 S2 ECE B
Electronics & Communication
Engineering
EN010 106Basic Civil
Engineering.3 4
S1 S2 EEE
Electrical & Electronics
Engineering
EN010 106Basic Civil
Engineering.3 4
S1 S2 IT
Information Technology
EN010 106Basic Civil
Engineering. 3 4
S1 S2 ME A
Mechanical Engineering
EN010 106Basic Civil
Engineering.3 4
S1 S2 ME B
Mechanical Engineering
EN010 106Basic Civil
Engineering.3
4
S1 S2 MET
Metallurgy
EN010 106Basic Civil
Engineering.3 4
http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107 -
7/25/2019 NBA SAR CE Amal Jothi Clg
14/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 14
II.6. Total number of students: UG: 449
S1 S2 AUE
Automobile EngineeringEN010 104 Engineering
Mechanics
5
6
S1 S2 CH
Chemical Engineering
EN010 104 Engineering
Mechanics
5 6
S1 S2 CSE A
Computer Science &
Engineering
EN010 104 Engineering
Mechanics5 6
S1 S2 CSE B
Computer Science &
Engineering
EN010 104 Engineering
Mechanics5 6
S1 S2 ECE A
Electronics & Communication
Engineering
EN010 104 Engineering
Mechanics5 6
S1 S2 ECE BElectronics & Communication
Engineering
EN010 104 Engineering
Mechanics5 6
S1 S2 EEE
Electrical & Electronics
Engineering
EN010 104 Engineering
Mechanics5 6
S1 S2 IT
Information Technology
EN010 104 Engineering
Mechanics5
6
S1 S2 ME A
Mechanical Engineering
EN010 104 Engineering
Mechanics
5 6
S1 S2 ME B
Mechanical Engineering
EN010 104 Engineering
Mechanics5
6
S1 S2 MET
Metallurgy
EN010 104 Engineering
Mechanics5 6
Subjects taken for S3 MEHours/
weekCredit
S3 ME A 010 408(CE) Strength of Materials Lab 3 2
S3 ME B 010 408(CE) Strength of Materials Lab 3 2
Subjects taken for S3 AUE Hours/ Credit
AU 010 408(CE) Strength of Materials Lab 32
http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107http://d/Local%20Settings/Temp/Local%20Settings/Temp/ZGTemp/M%20G-S1S2-SCHEME.doc%23EN107%23EN107 -
7/25/2019 NBA SAR CE Amal Jothi Clg
15/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 15
II.7.Minimum and maximum number of staff on roll during the curr ent and three
previous academic years (1st July to 30th June) in the department.
.7.1. Summary of budget for the CFY and the actual expenditu re incurr ed in the
CFYm1, CFYm2 and CFYm3 (for the department):(All amount in lakhs of Rupees)
ItemsCAY (2014-
2015)
CAYm1 (2013-
2014)
CAYm2 (2012-
2013CAYm3 (2011-
2012)
Min. Max. Min. Max. Min. Max. Min. Max.
Teachingstaff inthe department
33 34 30 32 30 30 20 22
Non-teaching staff 99
8 10 10 10 9 9
Total 42 43 38 42 40 40 29 31
Items
BudgetedinCFY
(2014-2015)
Actuale
xpensesinCFY.
(till
Decemb
er2014-15)
BudgetedinCFYm1
2013-14)
ActualE
xpensesCFYm1
(2013-20
14)
Budgeted
inCFYm2
(12-13)
ActualE
xpensesin
CFYm
2
Budgetedin
CFYm
3
ActualE
xpenses
inCFYm3
Laboratory equipment 2.35 2.5 3.18 1.59 21.78 36.88 11.11 5.25
Software 2.00 7.00 1.00 NIL 1.0 NIL 4.00 3.32
Laboratory consumable 1.25 0.63 1.12 0.69 1.0 0.93 0.89 0.59
Maintenance and spares 0.25 0.01 0.25 0.09 0.5 0.19 0.30 0.22
Training and Travel0.15 0.05 0.15 0.08 0.05 0.1 0.07 0.05
Miscellaneous expenses
for academic activities1.5 0.95 1.5 1.35 1.25 1.1 0.12 0.06
Total 7.5 11.14 7.2 3.8 25.58 39.2 16.49 9.46
-
7/25/2019 NBA SAR CE Amal Jothi Clg
16/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 16
III. Programme Specific information
I I I .1. Name of the Programme
Bachelor of Technology (B. Tech)
(List name of the programme, as it appears on the graduates certificateand
transcript, and abbreviation used for the programme.)
I I I .2. Ti tle of the Degree
Bachelor of Technology in Civil Engineering (B. Tech CE)
(List name of the degree title, as it appears on the graduates certificate and
transcript, and abbreviation used for the degree.)
I I I .3. Name, designation, telephone number, and emai l address of the ProgrammeCoordinator for the NBA:
SR. CLARAMMA ROSAR Y
PROFESSOR & HEAD OF THEDEPARTMENT
TELEPHONE NUMBER: 04828 305563, 251661, 305500/555
FAX NO: 04828 251136
E MAIL: [email protected]
I I I .4. History of the programme along with the NBA accreditation, if any
I I I .5. Deficiencies, weaknesses/concerns f rom previous accreditations:N/A
I I I .6. Total number of students in the programme: 449
Programme Description
UG in Civil
Engineering
Started with 60 seats in2006
Intake increased to 90 in 2010
Intake increased to 120 in 2012
-
7/25/2019 NBA SAR CE Amal Jothi Clg
17/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 17
I I I .7.Min imum and maximum number of staff for the curr ent and the three previous
academic years (1st Ju ly to 30th June) in the programme:
I I I .8. Summary of budget for the CFY and the actual expenditu re incurr ed in
CFYm1, CFYm2 and CFYm3 (for this programme in the department exclusively):
(All amounts in Lakhs of Rupees)
Items CAY(2014-2015) CAYm1(2013-2014) CAYm2( 2012-2013 CAYm3
Min. Max. Min. Max. Min. Max. Min. Max.
Teachingstaffin thedepartment
3334 30
32 30 30 20 22
Non-
teaching staff 9 98 10 10 10 9 9
Total 42 43 38 42 40 40 29 31
Items
Budgetedi
n
CFY
Actual
expensesin
CFY(
till)
Budgetedin
CFYm1
Actual
Expensesin
CFYm1
Budgeted
inCFYm2
Actual
Expensesin
CFYm2
Budgetedin
CFYm3
Actual
Expensesin
CFYm3
Laboratoryequipment
2.35 2.5 3.18 1.59 21.78 36.88 11.11 5.25
Software 2.00 7.00 1.00 NIL 1.0 NIL 4.00 3.32
Laboratory
consumables1.25 0.63 1.12 0.69 1.0 0.93 0.89 0.59
Maintenance
and spares0.25 0.01 0.25 0.09 0.5 0.19 0.30 0.22
Travel 0.15 0.05 0.15 0.08 0.05 0.1 0.07 0.05
Miscellaneous
expenses for
academic activities
1.5 0.95 1.5 1.35 1.25 1.1 0.12 0.06
Total 7.5 11.14 7.2 3.8 25.58 39.2 16.49 9.46
-
7/25/2019 NBA SAR CE Amal Jothi Clg
18/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 18
PART B
1. Vision, Mission and Programme Educational Objectives (75)
(List and articulate the mission and vision statement of the institute and department)
1.1.Vision and Mission (5)
1.1.1.State the Mission and Vision of the insti tute and department (1)
Vision of the College
To be a centre of excellence in technical higher education, research and support services,
capable of making significant contribution to individual and societal empowerment.
Vision of the Department
To be the premier provider of practice oriented engineering education in the world at both
undergraduate and graduate levels, in order to achieve a successful career in academic,
research or industrial fields, by providing them with requisite technical background thereby
ensuring individual and societal empowerment
Mission of the College
To create technically qualified world-class professionals with social commitment through
career-oriented courses conducted by highprofile faculty, complemented with globally
interactive learning processes and cutting edge technology
Mission of the Department
To empower students and faculty as value added engineers with broad and thorough
education in Civil Engineering, fundamentals and application, so that they are capable of
facing the technical and social challenges and providing human services which are
sustainable and ensures environmental health.
1.1.2.I ndicate how and where the M ission and Vision are publi shed and
disseminated (2)
(Describe in which media, e.g. websites, curricula, books, etc. the mission and vision arepublished and how the same is disseminated among stakeholders)
The vision and mission are published in
College and department web pages
(http://www.ajce.in/amal-jyothi/courses/civil-engineering/ce-vision-mission/)
Academic Calendar
Display boards in the institution, Departments
Students Orientation Programmes
Department news letter
-
7/25/2019 NBA SAR CE Amal Jothi Clg
19/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 19
1.1.3.Mention the process for defin ing the Mission and Vision of the department (2)
(Articulate the process involved in defining the mission and vision of the department from the mission and
vision of the institute.)
The vision and mission statements were formulated at the department level meetings. Carewas taken to ensure that the vision and mission of the department was in sync with the
vision and mission of the institute.
The second stage of discussion was held at Academic Council of the institution and
positive suggestions were incorporated. The reformulated statements were checked and
approved by the advisory committee of the college.
-
7/25/2019 NBA SAR CE Amal Jothi Clg
20/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 20
1.2. Programme Educational Objectives (15)
1.2.1. Descri bethe Programme Educational Objectives (PEOs) (2)
(List and articulate the programme educational objectives of the programme under accreditation)
Program Educational Objectives (PEO)
The graduates will be geared up
1. To solve civil engineering problems in different scenarios there by making them
successful in engineering practice and/or research or in other fields they choose to
pursue.
2. To achieve expertise in design and analysis of various civil engineering structures.
3. To generate engineering designs that are based on sound principles which considers
functionality, aesthetics, safety, cost effectiveness and sustainability.
4. To function ethically in professional civil engineering roles and exhibit good
competency in their work culture.5. To enhance lifelong learning by being active members of professional bodies like
ICI, ISCE, ASCE etc. and obtain professional licensure.
1.2.2. State how and where the PEOs are publ ished and disseminated(2)
(Describe in which media, e.g. websites, curricula, books, etc., the PEOs are published and how
the same is disseminated amongstakeholders)
1.
They are published and disseminated by uploading the same in the Civil
Engineering Department web page of AJCE website,
2.
By circulating the same to students, public and stake holders
through department newsletters, brochures etc
3. Electronic media and social media are aggressively used to reach
out
to a wider audience
1.2.3. L ist the stakeholders of the programme (1)
(List the stakeholders of the programme under consideration for accreditation and articulate their
relevance)
Students
Faculty
Industry
Research Organizations
Staff Members
Parents
Alumni
Foundation Members
Advisory Committee
Community
-
7/25/2019 NBA SAR CE Amal Jothi Clg
21/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 21
1.2.4. State the process for establi shi ng the PEOs (5)
(Describe theprocess thatperiodically documents and demonstrates that the PEOs are
based on the needs of the various stakeholders of the programme.)
PEOs describe the broad objectives of the programme being offered. The mission
of the department has to be accomplished by the attainment of these objectives
PEOs have been established keeping in mind the changes occurring globally in the
field of science, engineering and technology
The objectives have to be in consonance with the current research scenario as well
as the needs of the industry
Brainstorming among faculty members and student members are held to establish
the PEOs
Opinions of various stakeholders & alumni are also elicited and their
recommendations are incorporated
-
7/25/2019 NBA SAR CE Amal Jothi Clg
22/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 22
1.2.5. Establi sh consistency of PEOs with M ission of the insti tute (5)
(Describe how the Programme Educational Objectives are consistent with the Mission ofthe department.)
The PEOs and the mission go hand in hand as it is well evident that the objectives finally
aim at the formation of world class engineers with unbeatable technical skills andscientific knowledge firmly based on applications of basic sciences. The PEOs ensure
the accomplishments of the mission of the Department with special emphasis on value
addition and technical competence of engineers, and sustainable solutions to engineering
problems.
1.3. Achi evement of Programme Educational Objectives (20)
1.3.1. Justif y the academic factors involved in achievement of the PEOs (5)
(Describe the broad curricular components tha tcontribute towardsthe attainment of theProgramme Educational Objectives.)
The PEOs were formulated keeping in mind the syllabus prescribed by MG University for
Civil Engineering. All the courses offered including the elective and multi disciplinary
courses ensure the attainment of PEOs to the satisfaction of various stake holders.
Emphasis is given for choosing interdisciplinary subjects as well as subjects from
humanities stream to make students face various challenges in this era of inter-
disciplinarity and innovation.
The achievement of PEOs through curriculum can be identified from the matrix below
Mission Component PEO1 PEO2 PEO3 PEO4 PEO5
Technical Qualification x x x
Social Commitment x x
Application of Basic Sciences x x x x
Interactive learning and
Application of Technologyx x x x x
PEO1 PEO2 PEO3 PEO4 PEO5
Core Subjects x x x x x
Elective Subjects x x x x x
Interdisciplinary Subjects x x x x x
Science Subjects x x
Humanities and Social Sciences x x
-
7/25/2019 NBA SAR CE Amal Jothi Clg
23/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 23
1.3.2. Explain how the admin istrati ve system helps in ensur ing the achievement of the
PEOs (5)
(Describe the committees and their functions, working processes and related regulations.)
Regular departmental meetings are held which is presided over by HOD and allmatters pertaining to improvement of academics as well as holistic improvement of
students are discussed to achieve the PEOs.
The Project evaluation committees are formed at the department level which
monitor the projects done by students and give constructive feedbacks and ensure
that
innovative components are incorporated
Student bodies are formed to co-ordinate the curricular and co curricular activities
of students
Faculty are entrusted with mentorship of group of students to aid their overall
development, both curricular and extra curricular
Committees at institute level to ensure proper functioning of the institute
Course structure is revamped periodically at university level in consultation with
various institutions
1.3.3 I ndicate the additi onal co-cur ri cular activities undertaken towards the
attainment of the PEOs (10)
I ndustri al visits
Industrial visits give the students a first-hand understanding of how big industries
work. Industrial visit is mandatory for all students of the department at least once in
a year.
I ndustrial training
Students are encouraged to undergo industrial training during their semester breaks
at industry of their choice. Also a report has to be submitted at the end of industrial
training. Industrial training provides an insight to students about what is happening
in the real world and also supplements their class room knowledge.
Soft ware training programmes
The advent of various softwares has made life of an engineer easy. So it is essential
that students are taught the nuances of various softwares which would help them in
giving better shape to their ideas as also give them an added advantage in their
career prospects. With this in mind the department has taken a lead in teaching
students softwares like C, AUTO CAD, STAAD, PRIMAVERA, REVIT etc. In
addition to that training on computerized survey using TOTAL STATION is also
given which will help them to be competitive in construction industry.
-
7/25/2019 NBA SAR CE Amal Jothi Clg
24/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 24
Workshops
Different workshops related with curriculum are arranged during academic year to
enhance their knowledge in engineering subjects and also students are encouraged
to participate in workshops conducted by other colleges
Parti cipation in paper presentati ons and technical competi tions at the national
and in ternational level
Students are encouraged to participate in paper presentations and technical
competitions at national and international levels.
Projects ( i n thr ee levels):
Students have to carry out a project at micro level (second year) where they choose
their area of interest. Micro project mainly aims at familiarizing students with
literature review and introduction to apply their class room knowledge to research.
Mini level projects (third year project) aims at exposing students to real world
scenarios of the theory they have studied in class in their area of interest. Main
level (final year) project aims at training them to find solutions to real world
problems with their technical knowledge. The development of students from
micro to mini to main project has been found to be very effective in their growth
as engineers.
e Learn ing: onl ine Courses
Students are encouraged to use online materials for their courses and also to attend
additional online courses to gain knowledge and experience beyond their curriculum
Aptitude training
Graduate Aptitude Training is given to students during their 3rdand 4thyears in order
to make them capable of attending all competitive exams, interviews etc. conducted
by industries and other employers.
1.4 Assessment of achievement of ProgrammeEducational Objectives (25)
1.4.1. Indicate the tools and processes used in assessment of the achievement of the PEOs (15)
Describe the assessment process thatperiodically documents and demonstrates the degree to
which the Programme Educational Objectives have been attained. Also include information on:
a).Listing and description of the assessment processes used to gather data upon which the
evaluation of each Programme Educational Objective is based. Examples of data collection
processes may include, but are not limited to, employer surveys, graduate surveys, focus
groups, industrial advisory committee meetings, or other processes that are relevant and
appropriate to the programme; b) The frequency with which these assessment processes are
carried out.
-
7/25/2019 NBA SAR CE Amal Jothi Clg
25/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 25
Surveys among faculty, students and alumni
Frequent survey is conducted among staff, students and alumni of the department
to assess the efficiency in the attainment of the PEOs
Analysis of results in each semester
Subject wise and batch wise result analysis is conducted every semester
Placement of students
Placement of students are encouraged by imparting regular placement trainings
Type of
Assessment
Tool
Assessment
ToolAssessment Criteria
Data
Collection
Frequency
Responsible
Entity
Mapped
PEO
DirectCourse
Performance
Number of students
passed
Once every
semester Department
PEO-1,
PEO-2,PEO-3
Indirect
Higher
Studies
Record
Number of students
who opted for higher
studies
Once every
yearDepartment
PEO 1,
PE0-2,
PE0-3
Indirect GATE Score
Number of students
with valid GATE
score
Once every
yearDepartment
PEO-1,
PE0-2
IndirectPlacement
Record
Number of students
placed
Once every
yearDepartment
PEO-1,
PE0-2,
PE0-3,
PEO-4,
PEO-5
IndirectAlumni
SurveyLevel of achievement
Once every
yearDepartment
PEO-1,
PE0-2,
PEO-3,
PE0-4,PEO-5
-
7/25/2019 NBA SAR CE Amal Jothi Clg
26/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 26
-
7/25/2019 NBA SAR CE Amal Jothi Clg
27/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 27
Placement and H igher Studies
Percentage of students going for PG programmes
Students are encouraged for higher studies. Training for various competitive exams like
Graduate Aptitude Test (GATE), Civil Service Coaching etc are provided which helpstudents secure admissions for higher studies with stipend. Every year 30% to 45 %
students opt for higher studies
1.4.2. Provide the evidence of the achievement of the PEOs (10)
a) The expected level of attainment for each of the programme educational objectives;b)
Summaries of the results of the evaluation processes and an analysis illustrating the extent
to which each of the Programme Educational Objectives isbeing attained; and c) How
the results are documented and maintained
1. Increase in the percentage of students enrolled:
Name of theCourse/programme (referquestion no. 4)
Applications
received
Selected
Civil Engg.
Enrolled Pass Percentage
*M *F
2008-2009 3235 62 21 41 75.8
2009-2010 2586 64 27 37 82.5
2010-2011 2533 94 35 59 82.23
2011-2012 2274 90 39 52 NA
2012-2013 (50%Management
quota only)1713 125 53 72 NA
ITEMLYG
(2010- 2014)
LYGm1
(2009-2013)
LYGm2
(2008-2012)
Number of students admitted corresponding toLYG including lateral entry
94 6462
Number of students who obtained jobs as perthe record of placement office
0 3 0
Number of students who found employmentotherwise at the end of the final year
26 16 26
Number of students who opted for higherstudies with valid qualifying scores/ranks
31 24 30
-
7/25/2019 NBA SAR CE Amal Jothi Clg
28/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 28
2013-
2014(50%Management1705 124 50 74 NA
M Tech 2012-2013
( SECM)50 24 5 18 NA
M. Tech 2013-2014( SECM) 75 24 9 15 NA
M. Tech 2014-2015
( SECM)45 20 7 13 NA
M. Tech 2014-2015
( CASE)25 9 1 8 NA
2. Increase in the pass percentage of students
The overall pass percentage have increased steadily form 50 percentage in 2010 to
82.23 percentage in 2014
3. Increase in number of students qualifying competitive exams
Batch GATE TANSET
2006-2010 1
2007-2011 5 4
2008-2012 7 5
2009-2013 15 6
2010-2014 13 3
Batch Overall pass percentage University position
2006-2010 50.00% 3rd in the University
2007-2011 74.60% 2nd in the University
2008-2012 75.80% 1stin the University
2009-2013 82.50% 1stin the University
2010-2014 82.22% 1stin the University
-
7/25/2019 NBA SAR CE Amal Jothi Clg
29/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 29
4. Increase in percentage of students who had opted for higher studies
%Against enrolled
UG to PG (2006-2010) 3.5
UG to PG (2007-2011) 56
UG to PG (2008-2012) 45.16
UG to PG (20092013) 37.5
UG to PG (20102014) 30.85
PG to Ph.D. 3
5.
Percentage of failures have reduced throughout the years
6.
Placements have increased considerably due to the initiation of the department
-
7/25/2019 NBA SAR CE Amal Jothi Clg
30/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 30
I ndicate how the PEOs have been redef in ing in the past (10 )
(Articulate, with rationale, how the results of the evaluation of the PEOs have been used to
review/redefine the PEOs)
The Programme Educational Objectives of the Civil Engineering Department were
redefined in the past by collecting feed backs from stake holders like students, alumni,
employers, parents and points come out of class committee meetings, PTA meetings and
Department quality cell meetings. It will be discussed in Department Assessment
Committee meeting. Assessment committee will find out the attainment level and gaps in
the attainment. Department advisory body will suggest the methods by which gaps can be
overcome and the same will be implemented in the next coming batch. Modifications
starting from course delivery to PO attainment are done to achieve the attainment
depending upon the suggestions from the advisory board.
-
7/25/2019 NBA SAR CE Amal Jothi Clg
31/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 31
2. Programme Outcomes (150)
2.1. Defi ni tion and Vali dation of Course Outcomes and Programme Outcomes (25)
2.1.1. L i stthe Course Outcomes (COs) and Programme Outcomes (POs) (2)
(List the course outcomes of the courses inprogramme curriculum and programme outcomes of theprogramme under accreditation)
Programme outcomes
By the culmination of this programme, the graduate acquires the ability
1.
To analyze, identify and solve engineering problems through application of
knowledge in mathematics, science and engineering.
2.
To embark on a career as an entrepreneur as civil engineering project manager/consultants thereby playing a very important role in society.
3. To analyze, evaluate and design building and bridge structures, its components,
water
supply and water pollution control systems.
4. To analyze, evaluate and design transportation system and their components.
5.
To analyze soil properties and to design foundation systems
6. To analyze, evaluate and utilize system components for utilization and
conservation of water resources.
7.
To understand the principles of surveying, astronomy and photogrammetry.
8. To efficiently plan estimate and execute civil engineering projects
9. To understand the ethical requirements of the profession, the need for lifelong
learning and the impacts of civil engineering activities on society.
The curriculum for Civil Engineering is set by M. G. University Board of Studies. The
courses in the curriculum are such that they satisfy all the objectives and outcomes
defined for the programme.
-
7/25/2019 NBA SAR CE Amal Jothi Clg
32/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 32
Cour se outcomes
EN010 101: Engineer ing Mathematics I
On completion of this course a successful candidate will be able to
1.
Develop a fundamental understanding of Matrix, Eigen values, Eigen vectors,diagonalized form of a given matrix and also reduce the quadratic form of a matrix
to its canonical form.
2. Understand the application of derivatives in more than one variable and also find
the
derivatives of higher orders.
3. Have a fundamental understanding of double integration, triple integration and
visualize the concept of volume in 3-dimensional space.
4. Understand the concept of linear differential equation of the second order and
modeling a differential equation from their applications.5. Find the Laplace transform and its inverse Laplace transform of a function and to
solve a differential equation using Laplace transform
EN010 102: Engineeri ng Physics
On completion of this course a successful candidate will be able to:
1.
Find innovative solutions to real world issues in Physics and Nanomaterials
2.
Develop a fundamental understanding of lasers and holography
3.
Compare and contrast the properties of superconductors, particularly their response
to magnetic fields
4.
Develop the ability to describe crystal structures and their symmetries and identify
the different types of defects that are found in real crystal structures
5.
Understand, compute and simulate the modes in step index fiber and graded index
fiber and applications of optical fibers in communication systems
EN010 103: Engineeri ng Chemistry and Envir onmental Studies
On completion of this course a successful candidate will be able to:
1. Understand the basics of chemical engineering and its relation to other disciplines
2. Understand electrochemical fundamentals, corrosion preventing methods and
environmental induced corrosion3. Understand the mechanism, properties and application of industrially important
polymeric resin
4. Understand the fundamentals of environmental pollution
5. Demonstrate knowledge of contemporary environmental issues.
-
7/25/2019 NBA SAR CE Amal Jothi Clg
33/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 33
EN010 104: Engineeri ng Mechanics
On completion of this course a successful candidate will be able to
2. Develop the ability to work comfortably with basic engineering mechanics concepts
required for analyzing static structures
3.
Identify an appropriate structural system to studying a given problem and isolate itfrom its environment, model the problem using good free-body diagrams and accurate
equilibrium equations
4. Identify and model various types of loading and support conditions that act on
structural systems
5. Understand the meaning of centers of gravity (mass)/centroid and moments of
inertia
6. Apply equations for straight line motion to solve problems with variable acceleration
7. Analyze dynamic problems using work energy and impulse momentum techniques
EN010 105: Engineeri ng Graphics
On completion of this course a successful candidate will be able to
1. Prepare and understand drawings.
2. Get an idea about various curves used in Engineering and their applications
3. Understand and use the principles of orthographic projections. Visualize three
dimensional objects and to design new products by studying about projections of
solids,
4. Study about the sections of solids, and thus to describe the internal details of objects,
machine parts etc.
5.
Develop surfaces which enables to design and fabricate surfaces of different shapes.6. Have a good knowledge in isometric and perspective projections which will be
helpful in representing the objects in three dimensional appearances.
EN010 106: Basic Civil Engineeri ng
On completion of this course a successful candidate will
1. Get a general idea on the varieties and cost of construction materials available in the
market, their manufacture processes and types
2. Understand on the different parts of buildings and its construction practices
makinghim eligible to analyze a construction work
3.
Get the idea about different foundations practically used and about the structural
significance of the same
4.
Get the concepts on surveying and surveying results like maps, remote sensing, GPS,
GIS etc.
5.
Understand the basics of transportation engineering, sanitary engineering, building
regulations and modern concepts of building construction
-
7/25/2019 NBA SAR CE Amal Jothi Clg
34/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 34
EN010 107: Basic Mechanical Engineeri ng
On completion of this course a successful candidate will
1. Familiarize with the basic machine elements
2.
Familiarize with the Sources of Energy and Power Generation
3.
Familiarize with the various manufacturing processes4.
Understand the theories behind turbine working and different types of turbine.
5.
Understand the working of pumps using in day to day life.
EN010 108: Basic Electrical Engineeri ng
On completion of this course a successful candidate will
1. Acknowledge students about charge, current, basic electric laws.
2. Analyze practical sources & ideal sources, measuring devices
3.
Acquaint himself about dc circuit analysis method
4. Know about different energy storage elements, transient behaviors.
5.
Acknowledge about three phase ac power, ac circuit analysis, power generation&distribution
6.
Understand the relevance of energy management and Green energy
EN010 109: Basic Electronics Engineer ing and In formation Technology
On completion of this course a successful candidate will
1.
Understand the concepts and components of basic electronics
2.
Understand the consumer applications of communication
3.
Clarify and decide on the type of different transistor configurations
4.
Understand the basic concepts of wireless communication
5.
Identify different modulation techniques
6.
Understand the basic principles of instrumentation
7. Identify the main components of a computer
8. Differentiate the function of system software and application software
EN010 110: M echanical Workshop
On completion of this course a successful candidate will
1.
Have complete awareness on the functioning of basic mechanical instruments and
activities
2.
Understand applications of hand tools and power tools
3.
Understand marking and measurement in Carpentry, Fitting, Smithy, and foundry
4.
Understand arc and gas welding techniques
EN010 111: El ectrical and Civil Workshop
On completion of this course a successful candidate will
1.
Enable the student to have the practical skills for Electrical wiring and basic
awareness of safety measures
2.
Impart fundamental knowledge in the use of electronic components to set up
circuits by soldering and testing them
3. Enable the students to have practical skills in civil instruments
4.
Impart fundamental knowledge in latest building materials, masonry, plumbing andsurveying
-
7/25/2019 NBA SAR CE Amal Jothi Clg
35/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 35
EN010 301: Engineeri ng M athematics I I
On completion of this course a successful candidate will
1. Be able to understand standard methods and basic numerical techniques for solving
problems
2.
Be able to compute interpolating polynomials, derivatives, integrals for a givenfunction from a given data
3.
Be able to evaluate line integrals and surface integrals, understand and use the
major theorems in vector calculus (the Fundamental Theorem of Line Integral,
Greens Theorem, Stokes Theorem, and the Divergence theorem)
4. Be able to demonstrate knowledge and understanding of basic calculus and
ordinary differential equations
5. Be able to apply Z- transforms techniques to solve difference equations
EN010 302: Economics and Commun ication Skil ls
On completion of this course a successful candidate will
1. Understand the structure and functioning of the major financial institutions
2. Understand the fundamentals of National Income Analysis
3. Analyse the problems of inflation and BOP and suggest measures to control them.
4. Have an understanding of the major issues in International Economics
5. Be able to express themselves fluently and appropriately in social and professional
contexts
6. Be equipped with the components of different forms of writing
CE010 303: F lu id MechanicsOn completion of this course a successful candidate will
1. Be able to convert units of any parameter between three systems of units,
understand the physical properties and characteristic behavior of fluids, and the
basic principles of fluid mechanics.
2. Be able to describe and interpret the behavior and performance of fluid at rest.
3. Be able to describe and interpret the behavior and performance of fluid in motion.
4. Be able to describe the behavior and performance of fluid when the fluid is flowing
through the pipe.
5.
Be familiar with dimensional analysis of fluid problems.
6.
Be able to apply similitude and modelling principles and techniques to solve
problems in hydraulics
-
7/25/2019 NBA SAR CE Amal Jothi Clg
36/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 36
CE010 304: Mechanics of Solids I
On completion of this course a student can
1. Sketch the shear force and bending moment diagrams for beams with different
support conditions and different load conditions.
2.
Determine the stresses and strains in the bars with varying sections, taperingsections, composite members etc.
3.
Determine the stresses on oblique sections when the direct stresses and shear
stresses are given.
4. Analyze both symmetrical and unsymmetrical sections subjected to bending stress.
5. Understand the shear stress distribution for beam sections of different cross-
sections.
6. Analyze both solid and hollow shafts subjected to torsion.
7. Solve problems of columns and struts using different methods such as Rankines
formula, Eulers theory.
CE010 305: Sur veying I
On completion of this course students
1. Develop knowledge of the basic and conventional surveying instruments, principle
behind them and working of the instruments
2. Develop knowledge regarding plotting of the area from the field measurements and
determination of the area
3. Become familiar with the theory behind curves
4. Understand the range of calculations that can be made with surveying data and
understand the linkages between surveying data and engineering design
CE010 306: Engineeri ng Geology
On completion of this course a student attains
1. Knowledge regarding the branches and scope of geology and geomorphic
processes
2. Idea regarding the internal constitution of the earth and major discontinuities
3. Knowledge of earthquake causes, impacts and resistance methods
4. Knowledge of basic mineralogy and petrology
5.
Ability to identify geologic structures and predict their impact on engineering
works
6.
Knowledge of the cause and effects of mass movements
7.
Idea of the occurrence and economic extraction of groundwater resources
CE010 307: M ater ial s Testing Lab I
On completion of this course a students can
1.
Learn about properties of engineering materials
2.
Impart knowledge about various aspects related to materials and its applications
3.
Gain the knowledge of mechanical behavior of materials
4.
Develop skills of effective identification of structure and property relationships
-
7/25/2019 NBA SAR CE Amal Jothi Clg
37/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 37
CE010 308: Sur veying Practical I
On completion of this course students should
1. Develop knowledge of the basic and conventional surveying instruments, principle
behind them and working of the instruments
2.
Become familiar with linear and angular measurements3.
Gain the ability to use survey equipment to measure heights and distances
4.
Gain basic knowledge about minor instruments of surveying
EN010 401: Engineeri ng Mathematics I I I
On completion of this course, the student will be able to
1. Have a fundamental understanding of Fourier series and their properties and be able
to give Fourier expansions
2. Understand Fourier Transform, the convergence issues, relation to Fourier Series and
properties of Fourier Transform
3.
Solve first and higher order differential equations selecting from a variety of
techniques
4. Understand basic principles of probability, and random variables
5. Know when to use a single or two tailed test and evaluate a null hypothesis using the
appropriate model
CE010 402: Construction Engineer ing and Management
On completion of this course, the student will gain knowledge in
1. Network scheduling techniques
2. Details of execution of works
3.
Principles of functional planning of buildings4. Mechanization in construction
5. Project cost analysis and industrial relation
CE010 403: M echanics of Soli ds I I
On completion of this course, the student will be able to
1. Understand the basic strength and energy theorems of structural mechanics and its
applications
2. Study deformations of bodies caused by externally applied forces
3. Study the internal effects produced due to moving loads
4.
Analyze arches, cables and suspension bridges
5.
Calculate the stresses and strains in different materials using the theories of elastic
failure
CE010 404: Open Channel Fl ow and Hydrau li c Machines
On completion of this course a student will gain knowledge in
1.
The basic theories of open channel flow
2.
Uniform flow and its application to design of efficient channel sections of various
shapes
3.
Gradually varied flow and its application in computation of typical water surface
profiles
4.
Hydraulic jump and its application to the energy dissipation devices5. Basics of the hydro-machinery and the components
-
7/25/2019 NBA SAR CE Amal Jothi Clg
38/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 38
CE010 405: Surveying I I
On completion of this course the student will gain knowledge in
1. Triangulation and theory of errors
2.
Hydrographic surveying and electromagnetic distance measurement
3.
Terrestrial photogrammetry4.
Geodesy and field astronomy
CE010 406: Civil Engineeri ng Dr awing
On completion of this course the students will
1. Gain knowledge regarding the principles of building drawing
2. Gain graphical knowledge about the basic building components
3. Prepare plan, section and elevation of buildings
4. Prepare site plan and service plan of buildings as per Kerala building rules
CE010 407: Survey Practical I I
On completion of this course students gain a practical knowledge in
1. Different aspects of Theodolite Surveying
2. Different aspects of Tachometry
3. Setting out of curves and setting out of building plans
4. Total station
CE010 408: H ydraul ics Lab
On completion of this course students will
1.
Explore the fundamental principles of fluid mechanics through experimentation2. Investigate engineering design principles for pipe networks and open channel
systems
3. Get practical knowledge in calibration of Venturimeter, Orifice meter, water meter
and notches
4. Be capable of determining performance characteristics of turbines and pumps
EN010 501A: Engineer ing Mathematics I V
On completion of this course students will
1.
Be able to know the conditions for a complex variable function to be analytic and
harmonic
2.
Be able to recognize and apply the Cauchys integral formula
3.
Be able to use basic numerical techniques to solve problems
4.
Provide scientific techniques to decision making problems
5.
Be able to evaluate real integrals using contour integration
-
7/25/2019 NBA SAR CE Amal Jothi Clg
39/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 39
CE010 502: Computer Programming
On completion of this course a student will be able to
1. Get a strong foundation in the basics of C-Programming so that they can develop
ability to design soft wares
2.
Study, analyze and understand logical structure of a computer program, and differentconstruct to develop a program in C language
3.
Write small programs related to mathematical, and logical problems in C
4. Understand and apply the pointers, memory allocation techniques and use of files for
dealing with variety of problems
5. Understand and apply the in-built functions and customized functions for solving the
problems
CE010 503: Design of Concrete Structures I
On completion of this course a student will
1.
Understand the general mechanical behavior of reinforced concrete
2.
Be able to identify and apply the applicable industry design codes and methods
relevant to the design of reinforced concrete members
3.
Be able to analyze and design reinforced concrete members in flexure, shear and
compression
4. Be able to perform design of footings and stair cases
5. Be able to Sketch the reinforcement arrangement of the structural element and
understand any structural drawing
CE010 504: Geo-technical Engineeri ng I
On completion of this course a student will
1. Learn the common terminology used in the field of Geotechnical Engineering
2. Understand the behavior and properties of different types of soil and familiarize
laboratory tests used for them
3. Understand the interaction between water and soil
4. Understand the behavior of stresses and stress conditions in soils
5. Become familiar with deformation and settlement characteristics of soils, slope
stability concepts, compressibility and consolidation of soils
CE010 505: Quantity Sur veying and Valuation
On completion of this course a student will
1. Analyze the rates for different items of works and construction materials
2. Prepare detailed estimates and abstracts for entire construction projects
3. Prepare specification for common materials of construction and its items of works
4. Understand of the fundamental concepts of valuation of land and buildings
5. Be able to acknowledge and aware of the legal environment affecting property
valuation and ability to solve problems in the same realm
-
7/25/2019 NBA SAR CE Amal Jothi Clg
40/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 40
CE010 506: Structur al Analysis I
On completion of this course a student will
1. Study the force and displacement methods of structural analysis of indeterminate
structures
2.
Be able to solve statically indeterminate structures using classical methods3.
Be able to solve statically indeterminate structures using matrix (stiffness) method
4.
Be able to solve statically indeterminate structures using flexibility method
5. Get an idea about the finite element analysis concept
CE010 507: Computing Techniques Lab
On completion of this course a student will
1. Familiarized with computer hard ware, peripherals and network components
2. Be aware of recent application of soft wares
3.
Develop programming skills in C language4. Be able to handle input and output files
CE010 508: Geo-technical Engineeri ng L ab
On completion of this course a student will have
1. Ability to determine the index properties
2. Ability to determine the field density and permeability of soil
3. Ability to determine the shear strength of soil
4. Ability to determine the consolidation of soils
5.
An idea about sampling techniquesCE010 601: Design of Steel Structures
On completion of this course a student will
1. Be familiarized with the fundamental aspects of structural behavior of steel
structures
2. Be able to design steel structures satisfying the requirements of safety, feasibility and
economy
3. Be able to select the most suitable section for tension and compression members and
beams according to specific design criteria
4. Be able to Analyze and design the light gauge steel structures
5. Have an understanding of the design concept of steel chimney and water tank
CE010 602: Geo-technical Engineeri ng I I
On completion of this course a student will have the
1. Knowledge on the various steps and methods involved in site investigation and soil
exploration
2. Ability to Analyze of stress distribution for a given loading
3. Ability to Analyze and calculate earth pressure, bearing capacity and settlement for
different types of soil under different loading conditions
4.
Knowledge on different types of foundation
5.
Ability to design foundations under different loading conditions
-
7/25/2019 NBA SAR CE Amal Jothi Clg
41/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 41
CE010 603: Structural Analysis I I
On completion of this course students will be able to
1. Analyze beams and portal frames using plastic theory
2.
Solve framed structures using approximate analysis methods
3.
Analyze continuous beams and frames using Kani's method4.
Obtain the influence lines for statically indeterminate structures
5.
Know elementary theory of elasticity and structural dynamics
CE010 604: Transportation Engineeri ng I
On completion of this course students will gain an in depth knowledge on
1. Railway track and geometric design
2. Railway operation and control
3. Tunnel system
4. Harbors
5.
Docks
CE010 605: Water Resour ces Engineer ing
On completion of this course students will gain an in depth knowledge on
1. Irrigation systems
2. Hydrology
3. Ground water hydraulics
4. Flow irrigation system
5. Reservoir planning
CE010 606L01: Advanced Sur veying
On completion of this course students will be able to
1. Become familiar with advanced methods of surveying
2. Develop a foundation for understanding the physical principles of remote sensing
3. Generate, integrate, Analyze and visualize spatial data
4. Apply knowledge in water resources management
CE010 606L02: Open Channel and Coastal H ydrauli cs
On completion of this course students will be able to
1.
Develop theoretical and practical knowledge on open channel flow
2.
Gain an in depth knowledge on Non uniform flow and hydraulic jump
3.
Acquire basic knowledge on Ocean Engineering
4.
Apply coastal hydraulics knowledge in Civil Engineering for the design of coastal
structures
-
7/25/2019 NBA SAR CE Amal Jothi Clg
42/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 42
CE010 606L03: A ir port Engineeri ng
On completion of this course students will gain an in depth knowledge on
1. Aircraft characteristics and environmental considerations
2.
Runway design
3.
Air traffic control network4.
Airport pavement
5.
Taxiway design and airport lightening
CE010 606L04: Advanced Mechanics of Materi als
On completion of this course students will be able to
1. Understand the fundamental concepts of mechanics of materials
2. Understand the stresses and strains of two dimensional and three dimensional
problems
3. Acquire knowledge on torsion of prismatic bars
4.
Get knowledge on curved flexural members
5. Become familiar with beam on elastic foundation
CE010 606L05: Concrete Technology
On completion of this course students will gain an in depth knowledge on
1. Concrete materials
2. Fresh concrete
3. Elastic properties of concrete
4. Durability of concrete
5.
Special aggregate
CE010 606L06: Soil Stabili ty Analysis
On completion of this course students will gain an in depth knowledge on
1. Ground water seepage
2. Stability analysis of earth slopes
3. Methods to reduce land slides
4. Earthquake effects on soil foundation systems
5. Underpinning
CE010 607: Computer aided Design and Drafting L ab
On completion of this course students will be able to
1.
Familiarize with functional requirements and regulations related to buildings
2.
Become an expert user of an advanced CAD system
3.
Able to manage, design and implement civil engineering projects
CE010 608: Mater ial Testing L ab II
On completion of this course students will be able aware of testing of
1.
Constituent materials of Concrete
2.
Fresh concrete3. Hardened concrete 4. Tiles and bricks
-
7/25/2019 NBA SAR CE Amal Jothi Clg
43/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 43
CE010 706L05: Theory of Plates and Shells
On completion of this course students will gain knowledge on
1. Classical theories of plates
2. Laterally loaded rectangular plates
3.
Structural behavior of shells4. Classical theories of shells
5. Circular cylindrical shells
CE010 701: Design of H ydrauli c Stru ctures
On completion of this course students will gain knowledge on
1.
Functional requirements and design of different types of dams
2. Diversion head works
3. Canal regulation works
4. Water power Engineering
CE010 702: Environmental Engineering I
On completion of this course students will gain knowledge on
1. Basic principles of water supply Engineering
2. Collection, distribution and storage of water
3. Various unit operations and design of water treatment systems
4. Methods of analysis of water distribution network
CE010 703: Design of Concrete Stru ctures I I
On completion of this course students will gain knowledge on design of selected structures of
1.
Pre-stressed concrete2. Retaining wall
3. Continuous and circular beams
4. Domes
5. Water tanks
CE010 704: Architecture and Town Planning
On completion of this course students will gain knowledge on
1. Basic principles of architectural design
2.
Functional planning of buildings3. Building services
4. Town planning concepts
5. Planning process
CE010 705: Tr ansportation Engineering I I
On completion of this course students will gain knowledge on
1. Principles and design of highway
2. Traffic Engineering
3. Highway materials
4.
Pavement design 5.Airport Engineering
-
7/25/2019 NBA SAR CE Amal Jothi Clg
44/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 44
CE010 706L01: Bui lding Automation and Smart Structures
On completion of this course students will gain an insight in to
1. Building automation
2. Building service control system
3.
Eco friendly buildings4. Smart materials
5. Control of structures
CE010 706L02: Ground I mprovement Techn iques
On completion of this course students will gain knowledge on
1. Selection of soil improvement method
2. Chemical stabilization
3. Grouts and grouting
4. Earth reinforcement
5.
Geotextiles
CE010 706L03: Pre-stressed Concrete
On completion of this course students will gain knowledge on
1. Basic concept of pre-stressing
2. Analysis of pre-stress
3. Losses of pre-stress
4. Elastic design of sections for flexure
5. Anchorage zone
CE010 706L04: Envir onmental Impact Assessment
On completion of this course students will gain knowledge on
1. Concepts of environmental impact analysis
2. Prediction and assessment of impact on air and water environment
3. Prediction and assessment of impact on noise and social environment
4. Environmental decision making
5. Environmental management systems
CE010 706L06: Traf fi c Engineer ing and Management
On completion of this course students will gain knowledge on
1. Traffic management
2. Capacity studies
3. Design of intersections
4. Traffic safety studies
5. Theories of traffic flow
-
7/25/2019 NBA SAR CE Amal Jothi Clg
45/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 45
CE010 707: Computer Appli cation L ab
On completion of this course students will be
1. Familiarize with software packages for analysis, design and project management
2. Able to Analyze and design structural components using STAAD Pro.
3.
Able to Analyze and design multistoried framed structures using STAAD Pro.4. Able to manage project using Primavera/MS project
CE010 708: Tr ansportation Engineeri ng Lab
On completion of this course students will be aware of testing of
1. Soil
2. Mixes
3. Bitumen
4. Road aggregates
CE010 801: Advanced Structural Design
On completion of this course students will be familiarize with behavior and design
procedure of some of the special structural elements such as
1. Road bridges
2. Shell structures
3. Industrial buildings
4. Plate and gantry girders
5. Steel bridges
CE010 802: Bui lding Technology and Management
On completion of this course students will have theoretical knowledge on
1. Concrete mix design
2. Prefabricated construction
3. Construction company and site organization
4. Material management and construction contracts
5. Claims manual for a construction organization
CE010 803: Environmental Engineering I I
On completion of this course students will be able to understand1. Basic principles of waste water engineering
2. Design and construction of sewers
3. Methods of waste water disposal
4. Unit operations of waste water treatment system
5. Layout and design of waste water treatment system
-
7/25/2019 NBA SAR CE Amal Jothi Clg
46/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 46
CE010 804 L01: Advanced Foundation Design
On completion of this course students will get an in depth knowledge in
1. Well foundations
2. Soil dynamics and machine foundations
3.
Sheet pile walls and cofferdams4. Foundation for special structures
5. Foundations in special soils
CE010 804 L02: Envir onmental geo-techniques
On completion of this course students will be familiar with
1. Clay mineralogy and soil structure
2. Effect of environment on Geotechnical properties of soils
3. Wastes and contaminants
4. Waste disposal and containment techniques
5.
Containment control systems
CE010 804 L03: Earthquake Engineeri ng and Design
On completion of this course students will be aware of
1. Causes of earthquakes
2. Effects of earthquakes
3. Capacity design concept
4. Seismic design of structures
5. Behavior of brick masonry walls
CE010 804 L04: Advanced Hydrology and System Analysis
On completion of this course students will be able to gain in depth knowledge in
1. Hydrologic cycle
2. Precipitation
3. Runoff estimation
4. Floods
5. System analysis concepts
CE010 804 L05: H ighway and Ai rf ield PavementsOn completion of this course students will be able to understand
1. Pavement types
2. Design of flexible pavements
3. Design of rigid pavements
4. Temperature stresses in concrete pavements
5. Evaluation of pavement condition
-
7/25/2019 NBA SAR CE Amal Jothi Clg
47/355
NBA- SAR Department of Civil Engineering
Amal Jyothi College of Engineering 47
CE010 804 L06: Structural Dynamics and Stabili ty Analysis
On completion of this course students will be able to study
1. Basic concepts of stability
2. Single degree of freedom system
3.
Comprehensive methods of dynamic analysis4. Beam column concept
5. Finite element application to dynamics
CE010 805G01: F in ite Element Analysis
On completion of this course students will be able to
1. Understand general procedure of finite element method
2. Formulate Finite element equations
3. Derive Shape functions of different elements
4. Derive Stiffness matrix of different elements
5.
Understand general plate bending elements
CE010 805G02: Envir onmental Poll uti on Control Techn iques
On completion of this course students will be able to
1. Understand the various forms of air pollution and control techniques
2. Understand the various forms of water pollution and control techniques
3. Understand the various forms of industrial pollution and control techniques
4. Develop knowledge in solid waste management
5. Study in detail about noise pollution and control measures
CE010 805G03: Optimi zation Techniques
On completion of this course students will be aware of
1. Classical optimization techniques
2. One dimensional unconstrained minimization
3. Unconstrained minimization
4. Integer linear programming techniques
5. Network techniques
CE010 805G04: L and Use Planni ng
On completion of this course students will acquire theoretical knowledge on
1. Various theories of planning and city desi