navigating between modes watch face items © 2020 ......before getting started... this section...

Contents

Before Getting Started...Watch Face Items

Navigating Between Modes

Mode Overview

Using the Crown

Hand and Day Indicator Movement

Solar Charging

Useful Features

Time AdjustmentUsing Watch Operations to Adjust the Timeand Day Settings

Using Mobile Link with a MobilePhone

Getting Ready

Auto Time Adjustment

Viewing Stopwatch Data

Setting the Alarm

Configuring World Time Settings

Adjusting Hand and Day Indicator Alignment

Phone Finder

Configuring Watch Settings

Changing the Home City Summer Time Setting

Checking the Watch Charge Level

ConnectionConnecting with a PhoneCanceling a Connection with a PhoneUsing the Watch in a Medical Facility orAircraftUnpairingIf you purchase another phone

MA2007-EB © 2020 CASIO COMPUTER CO., LTD.

StopwatchMeasuring Elapsed Time

Flyback Timing (Lap Timing)

Example: Recording a Race Lap Time

Checking the Difference Between the Currentand Previous Lap Times

Other SettingsConfiguring Dual Time Settings

Configuring Alarm Settings

Turning Off the Alarm

Resetting Watch Settings

Adjusting Hand and Day IndicatorAlignment

Adjusting Hand and Day Indicator Alignment

Moving to Another Time Zone

Other InformationSummer Time Switching

Supported Phones

Specifications

Mobile Link Precautions

Copyrights and Registered Copyrights

Troubleshooting

Operation Guide 5639

1

Before GettingStarted...

This section provides an overview of the watchand introduces convenient ways it can beused.

Note

● The illustrations included in thisoperation guide have been created tofacilitate explanation. An illustrationmay differ somewhat from the item itrepresents.

Watch Face Items

⑥

⑤

② ③

④

⑦

①

A　Alarm on/off settingWhile you are configuring alarm settings,the second hand indicates whether thecurrent alarm is enabled or disabled.[ON]: Alarm enabled[OFF]: Alarm disabled

B　[R]When the watch is standing by forconnection with a phone, the second handpoints to [R].

C　eThe second hand points to this mark whilethere is a connection between the watchand a phone.

D　Day of weekIn the Calendar Mode, the function handpoints to the day of the week in the HomeCity.

E　Target time indicatorIn the Stopwatch Mode, the function handindicates the difference between thecurrent and previous lap times.

F　[DT]While Dual Time is in use, the functionhand points to [DT].

G　[ALM]While the alarm time setting is beingconfigured, the function hand points to[ALM].

Navigating Between ModesPressing (A) in the Calendar Mode enters theStopwatch Mode and starts an elapsed timemeasurement operation.Holding down (A) for at least two seconds inthe Stopwatch Mode enters the CalendarMode.

30

30

A

Calendar Mode

Stopwatch Mode

● Connecting with a PhoneHold down (B) for at least two seconds untilthe second hand points to [R] twice.● To disconnect, press any button.

B

30 30

Any button

After connectionBefore connection

Mode Overview● Calendar ModeThe main hour, minute, and second handsindicate the current time.The small hour and minute hands showanother time (Dual Time).

30

① ② ③

④ ⑤

A　Dual Time hour

B　Dual Time minute

C　Current location time (24-hour time)One revolution every 24 hours.

D　Dual Time hour (24-hour hand)The hand points to the A-side for a.m.times, and to the P-side for p.m. times.

E　Day of the week at current locationStarting a Stopwatch Elapsed TimeOperationPress (A).Connecting with a Paired Phone to Adjustthe Watch’s TimeHold down (B) for at least 0.5 seconds until thesecond hand points to [R].Searching for a Paired PhoneHold down (B) for at least four seconds.


2

● Stopwatch ModeThe second hand, and the small hour andminute hands indicate the elapsed stopwatchtime.● The main hour and minute hands indicate

the current time.

30

① ② ③

④ ⑤

Start/Stop

Reset/Flyback

A　Stopwatch hours

B　Stopwatch minutes

C　Stopwatch seconds

D　Stopwatch hours (24-hour time)The hand points to the A-side for hours 0through 11, and to the P-side for hours 12through 23.

E　Target time indicatorShows the difference between the currentand previous lap times.

● AlarmThe small hour and minute hands indicate thealarm time.The second hand indicates the alarm enabled/disabled setting.● The main hour and minute hands indicate

the current time.

30

Enabling/Disabling the Alarm

①②

④

③

A　Alarm enabled/disabled

B　Alarm minute

C　Alarm hour

D　Alarm hour (24-hour time)The hand points to the A-side for a.m.times, and to the P-side for p.m. times.

Using the Crown● Fast Forward/Fast Reverse

Second clickFirst click

Normal timekeeping

Crown

Important!

● To prevent loss of water resistanceand/or damage due to impact, be sureto push the crown in to its normalposition after you are finished using it.

● When pushing the crown back in, takecare not to apply too much force.

After pulling out the crown to the first or secondclick, rotating it quickly in succession in eitherdirection will start a fast forward or fast reverseoperation. While a fast forward operation is inprogress, quickly rotating the crown insuccession again will increase the speed evenfurther.● Stopping Fast Forward/Fast ReverseRotate the crown in the direction opposite thatof the ongoing operation or press any button.

Note

● If you do not perform any operation forabout two minutes after pulling out thecrown, crown operations willautomatically become disabled. If thathappens, push the crown back in andthen pull it out again.

Hand and Day IndicatorMovement

30

Function hand

Day indicator

● Function Hand and Day IndicatorMovement

Changing the day setting of the watch will alsocause the function hand to move.

● Day● It can take anywhere from about 50 seconds

to about 3 minutes and 20 seconds for theday indicator to change after timekeepingreaches midnight. At this time, the functionhand moves as the day indicator changes.

● The day may not be indicated correctlywhile the watch’s crown is pulled out.


3

Solar ChargingThis watch runs on power supplied from arechargeable (secondary) battery that ischarged by a solar panel. The solar panel isintegrated into the face of the watch, andpower is generated whenever the face isexposed to light.

● Charging the WatchWhen you are not wearing the watch, put it ina location where it is exposed to bright light.

While you are wearing the watch, make surethat its face (solar panel) is not blocked fromlight by the sleeve of your clothing. Powergeneration efficiency is reduced even whenthe face of the watch is blocked only partially.

NOYES

Important!

● Depending on light intensity and localconditions, the watch may become hotto the touch when exposed to light forcharging. Take care to avoid burninjury after charging. Also, avoidcharging the watch under high-temperature conditions like the onesdescribed below.ー　On the dashboard of a vehicle

parked in the sunー　Near an incandescent light bulb or

other source of heatー　Under direct sunlight or in other hot

areas for long periods

● Remaining Charge and Dead BatteryYou can determine if the charge level is low bychecking the hand movement. Functionsbecome disabled as battery power goes low.

Important!

● Should the battery go low or go dead,expose the face (solar panel) to light assoon as possible.

Note

● Exposing the watch face to light afterthe battery goes dead will cause thesecond hand to revolvecounterclockwise until it stops atsecond 57. This indicates charginghas started.

Low Battery PowerThe second hand jumps at two-secondintervals.

30

Second hand

Dead BatteryAll hands and the day indicator are stopped.

1

● Charging Time GuidelinesThe table below shows guidelines forapproximate charging times.Charging Times Required for 1 Day ofOperationLight Intensity Approximate Charging Time

Highp

Low

A 8 minutesB 30 minutesC 48 minutesD 8 hours

Times Required to Achieve Next ChargeLevel

Light IntensityApproximate Charging TimeCharge Level

1Charge Level

2

Highp

Low

A 2 hours 22 hoursB 5 hours 81 hoursC 8 hours 131 hoursD 90 hours -

Charge Level 1 :Time from dead battery until watch operationstarts.Charge Level 2 :Time from watch operation start until a fullcharge.

Light Intensity

A　Sunny day, outdoors (50,000 lux)

B　Sunny day, near a window (10,000 lux)

C　Overcast day, near a window (5,000 lux)

D　Indoor fluorescent lighting (500 lux)

Note

● Actual charging time depends on thelocal charging environment.


4

● Power SavingLeaving the watch in a dark location for aboutone hour between the hours of 10 p.m. and5:50 a.m. will cause the second hand to stop,and the watch to enter Level 1 power saving.If the watch is left in this condition for six orseven days, all hands will stop and the watchwill enter Level 2 power saving.Level 1 :Basic timekeeping functions are operational.Level 2 :Only the day indicator is operational.

Note

● Note that the watch also may enter thepower saving state if its face is blockedfrom light by your sleeve while you arewearing it.

● The watch will enter power savingwhen it is in one of the modes below.ー　Calendar Modeー　Stopwatch Mode (reset to all zeros)

● Recovering from Power SavingOperation

Press any button, perform a crown operation,or place the watch in a well-lit area to recoverfrom power saving.

Useful FeaturesPairing the watch with your phone makes anumber of the watch’s features easier to use.Auto time adjustmentl Auto Time Adjustment

12:30

Selection of More Than 300 World Timecitiesl Configuring World Time Settings

In addition, a number of other watch settingscan be configured using your phone.

To transfer data to a watch and toconfigure settings, you first need to pairthe watch with your phone.l Getting Ready● Your phone needs to have the CASIO

“EDIFICE Connected” app installed to pairwith the watch.

Time AdjustmentYour watch can connect with a phone to obtaininformation that it uses to adjust its date andtime setting.

Important!

● Disable auto time adjustmentwhenever you are in a hospital, insidean aircraft, or in any other area whereuse of a phone is prohibited orrestricted.l Using the Watch in a Medical

Facility or Aircraft

Referring to the information below, configurethe time setting in accordance with the methodthat suits your own lifestyle.

Do you use a phone?Time adjustment by connecting with yourphone is recommended.l Auto Time Adjustment

12:30

Other than the above.You can adjust time settings byperforming operations on the watch.l Using Watch Operations to Adjust the

Time and Day Settings


5

Using Watch Operations toAdjust the Time and DaySettings

1. Pull out the crown to the second click.This causes the second hand to move to12 o’clock, and enables the hour andminute setting operation.

30Crown

Second hand

● Each press of (A) cycles throughavailable setting items in the sequenceshown below.

Day

Month

1 year

10 years

Hours, minutes

2. Rotate the crown to change the hour andminute settings.● While checking if the 24-hour hand is

indicating a.m. (right side) or p.m. (leftside), set the desired time.

3. Press (A).This enables the year ten’s digit settingoperation.

4. Rotate the crown to move the secondhand to the desired setting for the yearten’s digit.

80 40

90 30

20

5070

10

60

00Year (10’s digit)

5. Press (A).This enables the year one’s digit settingoperation.

6. Rotate the crown to move the secondhand to the desired setting for the yearone’s digit.

8 4

9 3

2

57

1

6

0Year (one’s digit)

7. Press (A).This enables the month setting operation.

8. Rotate the crown to change the month.

1011 12

8 4

9 3

2

57

1

6Month

9. Press (A).This causes the second hand to move to12 o’clock, and enables the day settingoperation. The function hand will moveslightly at this time.● The function hand will move repeatedly

while the day setting is being changed.l Hand and Day Indicator Movement

10. Rotate the crown to change the day.

30

Day

11. On a time signal at the top of a minute,push the crown back in.

Using Mobile Link witha Mobile Phone

While there is a Bluetooth connectionbetween the watch and phone, the watch timesetting is adjusted automatically. You can alsochange the watch’s other settings.

Note

● This function is available only whileEDIFICE Connected is running on thephone.

● This section describes watch andphone operations.X : Watch operationY : Phone operation

Getting ReadyTo use your watch in combination with aphone, you first need to pair them. Perform thesteps below to pair the watch with a phone.

●A Install the required app on yourphone.

In Google Play or the App Store, search for theCASIO “EDIFICE Connected” app and installit on your phone.

●B Configure Bluetooth settings.Enable the phone’s Bluetooth.

Note

● For details about setting procedures,see your phone documentation.


6

●C Pair the watch with a phone.Before you can use the watch in combinationwith a phone, you first need to pair them.

1. Move the phone to be paired with close to(within one meter of) the watch.

2. Y Tap the “EDIFICE Connected” icon.

3. Y Perform the operation shown on thescreen of the phone to be paired with.● If your phone is already paired with a

watch, tap , tap the item forconnecting with a new watch, and thentap this watch’s name.

● If a pairing prompt message appears,perform the operation shown on thephone screen.

● About two seconds after pairing starts,the second hand will point to [R]. Whenpairing is complete, the second handwill move to e.

Note

● The first time you start up EDIFICEConnected, a message will appear onyour phone asking if you want toenable location informationacquisition. Configure settings to allowbackground use of locationinformation.

Auto Time AdjustmentThe watch will connect with a phone at presettimes each day and adjust its time settings.● Using Auto AdjustYour watch adjusts its time setting four timesa day according to a preset schedule. If youleave the watch in the Calendar Mode, it willperform the adjustment operationautomatically as you go about your daily life,without any operation required by you.

12:30

Important!

● The watch may not be able to performauto time adjustment under theconditions described below.ー　While the watch is too far away from

its paired phoneー　While communication is not possible

due to radio interference, etc.ー　While the phone is updating its

systemー　While EDIFICE Connected is not

running on the phone

Note

● If the watch does not indicate thecorrect time even if it is able to connectwith a phone, adjust the hand and dayindicator positions.l Adjusting Hand and Day Indicator

Alignment● If there is a World Time City specified

with EDIFICE Connected, its time willalso be adjusted automatically.

● The watch will connect with the phoneand perform auto time adjustment ataround 12:30 a.m., 6:30 a.m., 12:30p.m. and 6:30 p.m. The connection isautomatically terminated after autotime adjustment is complete.

● Triggering Immediate Time AdjustmentThe watch’s time setting will be adjustedautomatically whenever you establish aconnection between the watch and a phone.Whenever you want to trigger immediate timeadjustment, perform the procedure below toconnect with a phone.

1. Move the phone close to (within one meterof) the watch.

2. X Enter the Calendar Mode.l Navigating Between Modes

3. X Hold down (B) for at least 0.5 secondsuntil the second hand points to [R].Release the button as soon as the secondhand points to [R].When the watch connects with a phone,the second hand will normally move to eand then the watch’s time setting will beadjusted.● The connection is terminated

automatically after time adjustment iscomplete.

3030

After time adjustmentConnected


7

Viewing Stopwatch DataThis section explains how to send lap times(up to 200 records) that are stored in watchmemory, as well as other data to your phonefor viewing with EDIFICE Connected.

● Sending Stopwatch Data to a PhoneUse the procedure below to send data fromthe watch to a phone.


2. X Hold down (B) for at least two secondsuntil the second hand points to [R] twice.This establishes a connection betweenthe watch and phone.

3. Y Perform the operation shown on thephone screen to transfer data measuredby the watch to the phone.After data transfer is complete, a list of themeasurement data will appear on thephone display.● Tapping a stopwatch data item displays

its details.

● Checking a Lap TimeUse EDIFICE Connected to check the datayou sent to the phone.


2. Y Perform the operation shown on thephone screen to view the measurementdata you want.

Note

● Tapping “Edit” displays a screen thatyou can use to change the data itemtitle and to delete lap time data.

Setting the Alarm



3. Y Perform the operation shown on thephone screen to configure alarm timesettings.

Configuring World TimeSettings

Specifying a World Time City with EDIFICEConnected causes the watch’s World TimeCity to change accordingly. The standardtime/summer time setting of the World Timewill be adjusted automatically without anywatch operation required by you.

30

Note

● EDIFICE Connected World Time letsyou select from among approximately300 cities as the World Time City.

● Selecting a World Time City



3. Y Perform the operation shown on thephone screen. The World Time setting willbe reflected on the watch.● You can determine whether a World

Time is a.m. or p.m. by checking theposition of the small 24-hour hand.

30

World Time hour (24-hour)

World Time hour and minute


8

● Configuring the Summer Time Setting



3. Y Perform the operation shown on thephone screen to select a summer timesetting.● “Auto”

The watch switches between standardtime and summer time automatically.

● “OFF”The watch always indicates standardtime.

● “ON”The watch always indicates summertime.

Note

● While the summer time setting is“Auto”, the watch will switch betweenstandard time and summer timeautomatically. You do not need toswitch between standard time andsummer time manually. Even if you arein an area that does not observesummer time, you can leave thewatch’s summer time setting as “Auto”.

● Changing the time setting manuallywith a watch operation will cancel autostandard time/summer time switching.

● EDIFICE Connected screen showsinformation about summer timeperiods.

● Swapping Your World Time and HomeTime



3. Y Perform the operation shown on thephone screen to swap your Home Timewith your World Time.For example, if your Home City is Tokyoand the World Time City is New York, theywill be swapped as shown below.

30 30

Home City (New York)

After swapping

Home City (Tokyo)

Before swapping

World Time City (New York)

World Time City (Tokyo)

Note

● Auto time adjustment does not work for24 hours after swapping of the HomeTime and World Time.

Adjusting Hand and DayIndicator Alignment

If the hands and/or day indicator are out ofalignment even though auto time adjustmentis being performed, use EDIFICE Connectedto adjust them.



3. Y Perform the operation shown on thephone screen to correct hand and dayindicator alignment.

Phone FinderYou can use phone finder to trigger a tone onthe phone to make it easy to find. The tone isforced to sound even if the phone is in vibratemode.

Important!

● Do not use this function in areas wherephone call tones are restricted.

● The tone sounds at a high volume. Donot use this function when listening tophone output over earphones.

1. X If the watch is connected with a phone,press any button to terminate theconnection.This will cause the watch to enter theCalendar Mode.

3030

DisconnectedConnected

2. X Hold down (B) for at least four secondsuntil the second hand points to e.A connection will be established betweenthe watch and phone, and then thephone’s ringtone will sound.● It will take a few seconds before the

phone tone sounds.

3. X Press any button to stop the tone.● You can press any watch button to stop

the phone tone, but only during the first30 seconds after it starts to sound.


9

Configuring Watch SettingsYou can use EDIFICE Connected to specifythe amount of time until the Bluetoothconnection is automatically terminated, and toconfigure other settings.



3. Y Select the setting you want to changeand then perform the operation shown onthe phone screen.

Changing the Home CitySummer Time Setting



3. Y Perform the operation shown on thephone screen to change your Home Citysummer time setting.

Checking the Watch ChargeLevel

Use the procedure below to check the currentcharge level with EDIFICE Connected.



3. Y Use EDIFICE Connected to check thecharge level.

Connection

Connecting with a PhoneThis section explains how to establish aBluetooth connection with a phone that ispaired with the watch.● If the watch is not paired with the phone you

want to connect with, refer to the informationbelow and pair them.lC Pair the watch with a phone.

1. Move the phone close to (within one meterof) the watch.


Important!

● If you have problems establishing aconnection, it could mean thatEDIFICE Connected is not running onthe phone. On the phone’s HomeScreen, tap the “EDIFICE Connected”icon. After the app starts up, hold downthe watch’s (B) button for at least twoseconds.

Note

● The connection will be terminated ifyou do not perform any operation onthe watch or phone for a fixed amountof time.To specify the connection limit time,perform the following operation withEDIFICE Connected: “Watch settings”n “Connection time”. Next, select asetting of 3 minutes, 5 minutes, or 10minutes.

Canceling a Connection with aPhone

Pressing any button terminates the Bluetoothconnection and returns the second hand to itsnormal operation.

3030



10

Using the Watch in a Medical Facilityor Aircraft

You can use the procedure below to disableauto time adjustment when you are in ahospital, inside an aircraft, or in any other areawhere use of a phone is prohibited orrestricted. To re-enable auto time adjustment,perform the same operation again.



3. Y Perform the operation shown on thephone screen to enable or disable autotime adjustment.

UnpairingUse the procedure below to delete pairinginformation from EDIFICE Connected.

1. X If the watch is connected with a phone,press any button to terminate theconnection.

3030



3. Y Perform the operation shown on thephone screen to unpair.

If you want to disable connection between thewatch and a phone, perform the procedurebelow to delete pairing information from thewatch.

1. X Pull out the crown to the second click.This causes the second hand to move to12 o’clock.

30Crown

Second hand

2. X Hold down (A) for at least five seconds.When pairing information is deleted, thesecond hand will to move from e to 12o’clock.

3. X Push the crown back in.

If you purchase another phoneYou need to perform the pairing operationwhenever you want to establish a Bluetoothconnection with a phone for the first time.lC Pair the watch with a phone.

StopwatchPressing (A) in the Calendar Mode enters theStopwatch Mode and starts an elapsed timemeasurement operation (Direct Start).The stopwatch measures elapsed time in unitsof one second up to 23 hours, 59 minutes, 59seconds (24 hours).

30

Note

● Direct Start is disabled while there is aBluetooth connection between thewatch and another device.

Measuring Elapsed Time

1. In the Calendar Mode, press (A).l Navigating Between ModesThis enters the Stopwatch Mode andstarts an elapsed time measurementoperation.

30 30

SecondsHours, minutes

Stopwatch ModeCalendar Mode

Hours (24-hour time)

Stop

Resume

Stop

Start

2. Press (B) to reset the elapsed time to allzeros.● To return to the Calendar Mode, reset

the stopwatch to all zeros and thenpress (B).


11

Flyback Timing (Lap Timing)

30

SecondsHours, minutesHours (24-hour time)

1. In the Calendar Mode, press (A).l Navigating Between ModesThis enters the Stopwatch Mode andstarts an elapsed time measurementoperation.Each press of (B) causes the elapsed timeof the section (lap time) to be shown forabout 10 seconds.

A

B

B

A

Timing Start 3

Timing Start 2

Timing Start 1

Stop

● Elapsed time measurement for the nextlap continues internally during theapproximately 10 seconds that the laptime is shown.When the elapsed time exceeds 10seconds, the second hand will return toindicating of the current lap time.Pressing (B) when the next lap time is10 seconds or less will display that laptime.



● Lap TimesA lap time is the time elapsed during a specificlap or segment. Lap times are recordedinternally by the watch. The watch displays theelapsed time of the current lap.

A Start

B

Lap Time 1

B

A Goal

Lap Time 2

Lap Time 3

Note

● Lap times can be viewed with EDIFICEConnected after measurement iscomplete.l Viewing Stopwatch Data

Example: Recording a RaceLap Time

This section explains how to record lap timeswhile watching a race. It also shows how youcan view lap times with EDIFICE Connectedafter the race is over.l Lap Times

30

During a raceMeasure lap times.

1. In the Calendar Mode, press (A).l Navigating Between ModesThis enters the Stopwatch Mode andstarts an elapsed time measurementoperation.

30

2. Use the operations below to perform atimer operation.

A

B

B

A Stop

Timing Start 1

Timing Start 2

Timing Start 3

Pressing (B) at the end of each lap willrecord them in watch memory.● Lap times are recorded in 1/1000-

second units during the first hour of anelapsed time measurement operation.



After a raceAfter the race is finished, you can view themeasured lap times with EDIFICE Connected.l Sending Stopwatch Data to a Phonel Checking a Lap Time


12

Checking the DifferenceBetween the Current andPrevious Lap Times

You can check the difference between theprevious and current lap times while a lap timemeasurement operation is in progress.Using Auto AdjustPressing (B) displays the difference betweenthe current and previous lap times.

A

B

B

B

A

Timing Start 2

Timing Start 1

Stop

Timing Start 3

Timing Start 4

Lap Time 1

Lap Time 2

Lap Time 3

● When you measure a lap time, the functionhand indicates the difference between thecurrent and previous lap times.

● From measurement of the second lap time,you can check the difference between thecurrent and previous lap times.

To determine the difference between thecurrent and previous lap times

Same as previous lap time

1 second slow

2+ seconds slow

1 second fast

5 seconds fast

5+ seconds fast Target time indicator

Other SettingsThis section explains other watch settings youcan configure.

Configuring Dual TimeSettings

Dual Time lets you keep track of the currenttime in another time zone in addition yourcurrent location time.

1. Pull out the crown to the first click.This causes the second hand to move to12 o’clock, and the function hand to moveto [DT].

30

CrownFunction hand

2. Rotate the crown to change the Dual Timesetting.● You can set the Dual Time in 15-minute

increments.

30

＋

－

Dual Time 24-hour

Dual Time hour and minute

3. Push the crown back in.

Configuring Alarm SettingsThe watch will beep when the alarm time isreached.● The beeper is muted in the cases described

below.ー　When battery power is lowー　When watch is at Level 2 power savingl Power Saving


30

CrownFunction hand

2. Press (A).This causes the function hand to move to[ALM] and turns on the alarm.

3. Rotate the crown to change the alarm timesetting.● Check the 24-hour hand to see if it is

indicating a.m. or p.m. for the alarmtime.

30

＋

－

Alarm on

Minutes

Hours

Crown


● To stop the alarmTo stop the alarm after it starts to sound whenan alarm time is reached, press any button.

Note

● A beeper sounds for 10 seconds whenan alarm time is reached.

● You can also use EDIFICE Connectedto configure alarm time settings.


13

Turning Off the AlarmIf you leave the alarm turned on, it will soundevery day at the preset alarm time.To stop the alarm from sounding, perform thesteps below to turn it off.● To have the alarm sound again, turn it on.


30

CrownFunction hand

2. Press (A).This causes the function hand to move to[ALM] and turns on the alarm.

3. Press (B) to move the second hand to off.● Each press of (B) toggles between on

and off.

30

Alarm on

Second handAlarm off


Resetting Watch SettingsThis section explains how to return the watchsettings below to their initial factory defaults.● Watch Settings● Stopwatch● Alarm

1. Enter the Calendar Mode.l Navigating Between Modes

2. Pull out the crown to the second click.This causes the second hand to move to12 o’clock.

3. Hold down (A) for at least 10 seconds untilthe second hand performs one fullrotation.

30

Crown

Second hand


Note

● Resetting the watch will also deleteinformation for pairing the watch with aphone, and unpair them.

Adjusting Hand andDay Indicator

AlignmentStrong magnetism or impact can cause thehands and/or the day indicator to go out ofalignment. If this happens, adjust hand andday indicator alignment.

Adjusting Hand and DayIndicator Alignment

1. Pull out the crown to the second click.This causes the second hand to move to12 o’clock.

2. Hold down (B) for at least five secondsuntil the watch beeps. Release the buttonwhen you hear the beep.This causes the second hand to performone full revolution and enablesadjustment of second hand alignment.

30

Crown

Second hand

3. Rotate the crown to align the second handwith 12 o’clock.

4. Press (B).This enables adjustment of hour hand,minute hand, and 24-hour handalignment.

30

Hour handMinute hand

24-hour hand


14

5. Rotate the crown to align the hour hand,minute hand, and 24-hour hand with 12o’clock.

6. Press (B).This enables adjustment of small hourhand, small minute hand, and small 24-hour hand alignment.

30

Small hour handSmall minute hand

Small 24-hour hand

7. Rotate the crown to align the small hourhand, small minute hand, and small 24-hour hand with 12 o’clock.

8. Press (B).This enables function hand and dayindicator alignment.

30

Function hand

9. If the function hand and/or the dayindicator is out of alignment, rotate thecrown to adjust them. Move the functionhand to 12 o’clock and/or the day to thecenter of the indicator window.● The movement ranges of the function

hand and day indicator are limited whenyou rotate the crown. The maximumleft-right movement of the function handis 180 degrees in either direction. Theday indicator moves only slightly.

● After the function hand and dayindicator are in the positions you want,advance to step 12 of this procedure. Ifyou are unable to make the adjustmentsyou want, go to step 10.

10. Press (B).Confirm that the day indicator shows 1.

11

Day indicator

● The function hand will move repeatedlywhile the day setting is being changed.The function hand may continue tomove for about 20 minutes.l Hand and Day Indicator Movement

11. If 1 is not shown for the day, rotate thecrown until 1 is shown for the day.● Rotating the crown also causes the

function hand to move. Move thefunction hand to 12 o’clock.


Note

● Leaving the crown pulled out for morethan approximately 30 minutes withoutperforming any operation willautomatically cause the adjustmentoperation to become disabled. If thishappens, push the crown back in to itsnormal position and then pull it outagain to restart the procedure from thebeginning. Pushing the crown in to itsnormal position part way through thealignment procedure will cause thehands to return to their normal position.Any alignment you performed up tothat point will be applied.

Moving to Another TimeZone

Use the procedure below to easily change dayand time settings of the watch to a destinationlocation.● Before Boarding

1. Configure the World Time (Dual Time)setting to the current time at yourdestination.

30

Destination time

Current time

l Selecting a World Time City2. Disable auto time adjustment.

30

l Using the Watch in a Medical Facility orAircraft

● After Arriving

1. Swap the origin time zone time with thedestination time zone time.

30 30

After swappingBefore swappingDestination time

Destination time

l Swapping Your World Time and HomeTime

2. Enable auto time adjustment.l Using the Watch in a Medical Facility or

Aircraft3. Adjust the time setting.

l Triggering Immediate Time Adjustment


15

Other InformationThis section provides non-operationalinformation you also need to know. Refer tothis information as required.

Summer Time Switching● Connecting with a Phone to SwitchAfter the watch is connected with a phone,summer time switching of Home City time andWorld Time is performed in accordance withthe EDIFICE Connected setting (Auto/ON/OFF) as described below.Auto :After the watch is connected with a phone,summer time is displayed for the currentlocation time or World Time when it is withinthe summer time period. Otherwise standardtime is displayed.ON :The watch always displays summer time.OFF :The watch always displays standard time.

● Auto Summer Time SwitchingWhen the watch is connected to a phone, it issent summer time period information for yourHome City. If there is a World Time Cityspecified with EDIFICE Connected,information for that city will also be sent. If theEDIFICE Connected summer time setting is“Auto”, the watch will keep track of the summertime period and perform summer timeswitching automatically, even if it is notconnected with the phone.

Supported PhonesFor information about phones that canconnect with the watch, visit the CASIOwebsite.https://world.casio.com/os_mobile/wat/

SpecificationsAccuracy at normal temperature :±15 seconds per month average when timeadjustment by communication with a phone isnot possible.Timekeeping :

Hour, minute (10-second hand movement),second, day, day of the week, Full AutoCalendar (2000 to 2099)

Dual Time :Hour, minute, 24-hour

Stopwatch :Measuring unit: 1 secondMeasuring capacity: 23:59’59” (24 hours)Measurement Functions:

Normal elapsed time measurement,flyback timingDirect Start

Starts stopwatch elapsed timemeasurement from the CalendarMode.

Alarm :Setting units: Hours, minutesBeeper: 10 seconds

Mobile Link :Auto Time Correction

Time setting adjusted automatically atpreset time.

One-touch Time CorrectionManual connection and time adjustment

Phone finderWatch operation sounds the alert soundof the phone.

Stopwatch data transfer200 measured data records(measurement time, lap time)

World TimeCurrent time for a selection ofapproximately 300 citiesHome Time/World Time swapping

Auto summer time settingAutomatic switching between standardtime and summer time.

Alarm SettingsHand alignment correctionData Communication Specifications

Bluetooth®

Frequency Band: 2400MHz to 2480MHzMaximum Transmission: 0 dBm (1 mW)Communication range: Up to 2 meters(depends on environment)

Other :Power Saving, Low Battery Alert

Power Supply :Solar panel and one rechargeable battery

Approximate Battery Life :Approximately 5 monthsConditions

Not exposed to light under the conditionsbelow.Auto Time Adjustment: 4 times/dayAlarm: Once (10 seconds)/dayPower Saving: 6 hours/day

Specifications are subject to change withoutnotice.

Mobile Link Precautions● Legal Precautions● This watch complies with or has received

approval under the radio laws of variouscountries and geographical areas. Usingthis watch in an area where it does notcomply with or has not received approvalunder applicable radio laws may be acriminal offense. For details, visit the CASIOWebsite.https://world.casio.com/ce/BLE/

● Use of this watch inside of aircraft isrestricted under the aviation laws of eachcountry. Be sure to follow the instructions ofairline personnel.


16

https://world.casio.com/os_mobile/wat/

https://world.casio.com/ce/BLE/

● Precautions when using Mobile Link● When using this watch in combination with

a phone, keep the watch and phone closeto each other. A range of two meters isrecommended as a guideline, but the localenvironment (walls, furniture, etc.), thestructure of a building, and other factorsmay require a much closer range.

● This watch can be affected by other devices(electrical devices, audio-visual equipment,office equipment, etc.) In particular, it canbe affected by operation of a microwaveoven. The watch may not be able tocommunicate normally with a phone if amicrowave oven is operating nearby.Conversely, this watch may cause noise inradio reception and the video image of a TV.

● Bluetooth of this watch uses the samefrequency band (2.4 GHz) as wireless LANdevices, and use of such devices in closeproximity of this watch may result in radiointerference, slower communicationspeeds and noise for the watch and thewireless LAN device, or evencommunication failure.

● Stopping Radio Wave Emission by ThisWatch

The watch is emitting radio waves wheneverthe second hand is pointing to [R] or e.In addition, the watch also connects phoneautomatically four times a day to adjust its timesetting.When in a hospital, on an aircraft, or in anyother area where the use of radio waves is notallowed, use the operation below to stop radiowave generation.● Stopping Radio Wave Generation

Press any button to terminate the Bluetoothconnection.

3030


● Disabling Auto Time AdjustmentConfigure EDIFICE Connected settings todisable time adjustment between the watchand phone.l Using the Watch in a Medical Facility or

Aircraft

Copyrights and RegisteredCopyrights

● The Bluetooth® word mark and logos areregistered trademarks owned by theBluetooth SIG, Inc. and any use of suchmarks by CASIO Computer Co., Ltd. isunder license.

● iPhone and App Store are trademarks ofApple Inc. in the United States and othercountries.

● iOS is a trademark or registered trademarkof Cisco Systems, Inc.

● GALAXY is a registered trademark ofSamsung Electronics Co., Ltd.

● Android and Google PlayTM are trademarksor registered trademarks of Google LLC.

● Other company names and product namesused herein are trademarks or registeredtrademarks of their respective companies.

Troubleshooting

I can’t pair the watch with aphone.

Q1 I’ve never been able to establish a(pairing) connection between thewatch and phone.

Are you using a supported phone model?Check if the phone model and itsoperating system are supported by thewatch.For information about supported phonemodels, visit the CASIO Website.https://world.casio.com/os_mobile/wat/

Did you install EDIFICE Connected onyour phone?

EDIFICE Connected needs to be installedon your phone in order to connect with thewatch.lA Install the required app on your

phone.

Are your phone’s Bluetooth settingsconfigured correctly?

Configure the phone’s Bluetooth settings.For details about setting procedures, seeyour phone documentation.iPhone Users● “Settings” n “Bluetooth” n On● “Settings”n“Privacy”n“Bluetooth

Sharing”n“EDIFICE Connected”n OnAndroid Users● Enable Bluetooth.

Other than the above.Some phones need to have BT Smartdisabled to use EDIFICE Connected. Fordetails about setting procedures, see yourphone documentation.On the Home Screen, tap: “Menu” n“Settings” n “Bluetooth” n “Menu” n“BT Smart settings” n “Disable”.


17

https://world.casio.com/os_mobile/wat/

I can’t reconnect the watchand phone.

Q1 The watch will not re-connect with thephone after they are disconnected.

Is EDIFICE Connected running?The watch cannot re-connect with thephone unless EDIFICE Connected isrunning on the phone. On the phone’sHome Screen, tap the “EDIFICEConnected” icon. Then on the watch, holddown (B) for at least two seconds until thesecond hand points to [R] twice.

30

Have you tried turning your phone off andthen back on again?

Turn the phone off and then back on, andthen tap the “EDIFICE Connected” icon.Then on the watch, hold down (B) for atleast two seconds until the second handpoints to [R] twice.

30

Q2 I can’t connect while my phone is inthe Airplane Mode.

Connection with the watch is not possiblewhile the phone is in the Airplane Mode. Afterexiting the phone’s Airplane Mode, go to theHome Screen and tap the “EDIFICEConnected” icon. Then on the watch, holddown (B) for at least two seconds until thesecond hand points to [R] twice.

30

Q3 I changed the phone’s Bluetoothfrom enabled to disabled, and now Ican’t connect anymore.

On the phone, turn Bluetooth off and then backon, and then tap the “EDIFICE Connected”icon on the Home Screen. Then on the watch,hold down (B) for at least two seconds until thesecond hand points to [R] twice.

30

Q4 I can’t connect after turning off thephone.

Turn on the phone and then tap the “EDIFICEConnected” icon. Then on the watch, holddown (B) for at least two seconds until thesecond hand points to [R] twice.

30

Phone-Watch Connection

Q1 I can’t establish a connectionbetween the phone and watch.

Have you tried turning your phone off andthen back on again?

Turn the phone off and then back on, andthen tap the “EDIFICE Connected” icon.Then on the watch, hold down (B) for atleast two seconds until the second handpoints to [R] twice.

30

Has the watch been re-paired with thephone?

After deleting pairing information fromEDIFICE Connected, re-pair them.l Unpairing

If you are unable to establish aconnection...

Use the procedure below to delete thepairing information from the watch, andthen re-pair the watch and phone.

A　Pull out the crown to the second click.

B　Hold down (A) for at least fiveseconds until the second hand pointsto e.This deletes the pairing information.

C　Push the crown back in.

Changing to a DifferentPhone Model

Q1 Connecting the current watch toanother phone.

Pair the watch with the phone.l If you purchase another phone


18

Auto Time Adjustment byBluetooth Connection (TimeAdjustment)

Q1 When does the watch adjust its time?The watch will connect with the phone andperform auto time adjustment at around 12:30a.m., 6:30 a.m., 12:30 p.m. and 6:30 p.m. Theconnection is automatically terminated afterauto time adjustment is complete.

Q2 Auto time adjustment is performed,but the time setting is not correct.

Is auto time adjustment not beingperformed according to its normalschedule?

Note that auto time adjustment is notperformed for 24 hours after swapping ofthe Home Time and World Time, or afterthe time setting is adjusted manually onthe watch. Auto time adjustment willresume 24 hours after either of the aboveoperations is performed.

Is the watch in the Stopwatch Mode?Time adjustment will not start if the watchis in the Stopwatch Mode when ascheduled adjustment time is reached.Exit the Stopwatch Mode.l Navigating Between Modes

Is auto time adjustment enabled?Auto time adjustment will not beperformed at the scheduled times unlessit is enabled. Enable auto timeadjustment.l Using the Watch in a Medical Facility or

Aircraft

Q3 Time is not displayed correctly.If your phone is unable to receive a signalbecause you are outside its service range orfor some other reason, the watch may not beable to display the correct time. If thishappens, connect the phone to its networkand then adjust the time setting.

Alarm

Q1 The alarm does not sound.

Is the watch’s battery charged?Keep the watch exposed to light until itrecharges sufficiently.l Solar Charging

The crown is pulled out.The alarm will not sound while the crownis pulled out to the second click. Push thecrown back in to its normal position.

Is the alarm enabled?Enable the alarm.l Configuring Alarm Settings

Hand Movement andIndications

Q1 The second hand is jumping at two-second intervals.

Battery power is low. Keep the watch exposedto light until it recharges sufficiently.l Solar Charging

Q2 All hands are stopped and buttons donot work.

The battery is dead. Keep the watch exposedto light until it recharges sufficiently.l Solar Charging

Q3 The hands suddenly start moving athigh speed.

This is due to one of the reasons below, anddoes not indicate malfunction. Simply waituntil normal hand movement resumes.● The watch is recovering from a power

saving state.l Power Saving

● Watch is connected with a phone to adjustits time setting.l Auto Time Adjustment

Q4 Hands are stopped and buttons donot work.

The watch is in the charge recovery mode.Wait until the recovery process is complete(for about 15 minutes). The watch will recovermore quickly if you place it in a brightly litlocation.

Q5 The hand and/or day indicator are notaligned correctly.

Strong magnetism or impact can cause thehands and/or the indicator to go out ofalignment. Adjust hand and/or day indicatoralignment.l Adjusting Hand and Day Indicator

Alignment● Check the information below to find out how

to align the hands and/or day indicatormanually.l Adjusting Hand and Day Indicator

Alignment

Crown Operations

Q1 Nothing happens when I rotate thecrown.

If you do not perform any operation for abouttwo minutes after pulling out the crown(approximately 30 minutes in the case of handand day indicator alignment), crownoperations will automatically becomedisabled. Push the crown back in to its normalposition and then pull it out again to re-enablecrown operations.l Using the Crown


19

navigating between modes watch face items © 2020 ......before getting started... this section...

Documents