nanoskin car care products 2011
DESCRIPTION
NANOSKIN Car Care Products 2011 Buffandshine UkraineTRANSCRIPT
Paint Protection
Glass Protection
Wheel Protection
Leather, Vinyl, Rubber, Tire & Plastic Protection
Fabric & Carpet Protection
Cleaners, Degreasers, Shampoo, Scents, Maintenance
Polishes
Solvents
GLASS MOLECULENano Protective Shield
• Hardens to form a protective shield
• Prolongs surface perfection
• Relentless water beading
• Unique UV absorber
• Silicone Free
• Easy on, easy off
• Single stage and clear coat safe
NANOSKIN GLASS MOLECULE is a chemical solution that uses sol-gel process
to form a colloid of solid particles under 100 nanometers in size, which hardens to
form a protective shield (glass-like film), prolonging surface perfection, NOT a wax
or Teflon. Durability is strong with a consistent 25~30 car washes.
Best results are achieved by applying with 0.8mm mini HVLP spray gun@20PSI in
very thin coats. GLASS MOLECULE has a 24-48 hour cure time which requires no
attention from the user. After the cure, GLASS MOLECULE will be glossier and
harder.
Directions:
1. Rinse car with water to remove dirt and grease, then dry.
2. Clay the surface to remove contamination.
3. Remove any oil & grease with IPA glass cleaner.
4. Point spray nozzle towards surface area and spray evenly.
(0.8mm HVLP mini spray gun)
5. 2 times application is needed.
6. Allow to haze for 30 minutes, then wipe off with clean dry microfiber towels.
13.5oz
Description:
• Uses sol-gel to synthesize gels with particle
size less than 100nm, as shown in Figure A &
Figure B.
• By combining with polymer materials or
petroleum solvent formulas, the mixture can be
directly coated on a material surface by
spraying, dipping or painting.
• A glass-like protective film is created.
• Imparts excellent protective characteristics to
most types of surfaced including clear coated,
painted, aluminum, polished and anodized.
• Film Hardness 3H-4H.
(Meets ASTM D3363 criteria.)
• GLASS MOLECULE offers excellent water
repellency on the treated surface. Contact
angle measurements of the blends and
composites were conducted in a FTA-100
series.
PerformanceWater Repellency
• Introduction
Once the protective shield was coated on the painted
sheet, the degree of the contact angle increment was
tested. The purpose of this test was to verify the water
repellency after the coating of the protective shield on the
experimental painted sheet.
• Preparations and treatment of samples
Sample 1: Untreated painted sheet (uncoated)
Sample 2: Painted sheet coated with the protective
sheet
• Analysis method
A contact angle meter (FTA-100) was used to measure the
contact angle of water droplets. A distilled water droplet
was dropped onto a sample, and the contact angle was
measured. The droplet amount was 2μL, and five contact
angles were measured respectively for each sample to find
the average value.
• Analysis Result
Contact angle of water droplet
Sample 1 - Untreated
painted sheet (uncoated)
82.4±2.3
Sample 2 - Painted sheet
coated with protective
shield
109.3±2.0
Hardness Test1. Pre-test preparations
Pencil hardness testing mechanism preparation
(1) Pencils of 17 levels of hardness are sharpened and
laid out as pictured. The range of hardness from soft
to hard are
6B 5B 4B 3B 2B B HB F H 2H 3H 4H 5H 6H 7H 8H 9H
(2) A pencil hardness measurer meeting the ASTM D 3363
criteria is setup.
2. Preparation and processing of sample slides:
(1) Painted steel plates are buffed and cleaned.
(2) The protective film is evenly sprayed onto the
cleansed surface of the steel plates.
(3) Once dry, the surface is waxed and polished.
•
3. Test operations:
(1) The hardness test is conducted from the softest to
hardest.
(2) The pencil is placed in the measured as pictured
(3) The measurer is pushed across the surface of the
painted metal sheet at a speed of 5-10cm per second.
If there is a mere pencil mark that can be erased, the
pencil is not hard enough to scratch the surface.
(4) As hardness increases, a thread of paint is scraped
off from the surface, as pictured.
4. Results: Threshold of 3H
High/Low Temperature Test1. Foreword:
Metal sheets coated with GLASS MOLECULE are placed
in high temperature (150℃) and low temperature (0℃)
environments to test contact angles as an experience to
see whether the product retains its water repellency under
extreme temperatures.
2. Processing and preparation of samples:
Sample1: Painted surface coated with GLASS MOLECULE
Sample2: Painted surface coated with GLASS MOLECULE
after being placed under high heat (150℃)
Sample3: Painted surface coated with GLASS MOLECULE
after being placed under cold temp (0℃)
3. Method of analysis:
2μL of water is dropped on each sample. The contact
angle at which the droplet touches the surface of the
sample is measured using the FTA-100. This procedure is
done at five different points on each sample and the
average is taken.
Salt Water Test
1. Foreword:
A painted surface coated with GLASS MOLECULE is
soaked in 0.1M salt water for 48 hours, after which the
contact angle is measured to see whether GLASS
MOLECULE retains its water repellency after going
through extreme environments.
2. Processing and preparation of samples:
Sample1: Painted surface coated with GLASS
MOLECULE
Sample2: Painted surface coated with GLASS
MOLECULE, soaked in 0.1M salt water for 48
hours.
3. Method of analysis:
2μL of water is dropped on each sample. The contact angle
at which the droplet touches the surface of the sample is
measured using the FTA-100. This procedure is done at
five different points on each sample and the average is
taken.
Contact Angle
Sample 1: Painted surface coated with GLASS
MOLECULE
109.4±2.3
Sample 2: Painted surface coated with GLASS
MOLECULE after being placed under high heat
(150℃)
108.1±0.7
Sample 3: Painted surface coated with GLASS
MOLECULE after being placed under cold temp (0℃)
107.2±0.8
Contact Angle
Sample 1: Painted surface coated with GLASS
MOLECULE
109.4±2.3
Sample 2: Painted surface coated with GLASS
MOLECULE, soaked in 0.1M salt water for 48
hours
105.9±0.6
Wash Durability Test1. Foreword:
The purpose of this report is to state the effects of washing
on a car body coated with GLASS MOLECULE; whether it
effects the water repellency. The test is done by washing
the same surface with soap water and sponge 1,000
times, then measuring the contact angle.
2. Processing and preparation of samples:
A metal sheet 5cm x 5cm in size is coated with GLASS
MOLECULE. After it air-dries, the pre-washed contact
angle is measured.
3. Method of analysis:
2μL of water is dropped on the sample. The contact angle
at which the droplet touches the surface of the sample is
measured using the FTA-100. This procedure is done at
five different points on each sample and the average is
taken.
4. The wash test is done according to the experiment setup
regulated by ASTM D2486. The sample secured on the
machine counter where the sponge, moistened with
neutral soap, conducts the washing process. Each wipe to
and forth counts as one time, and the surface is washed
1,000 times. Upon completion, the sample is removed
from the machine, rinsed with water, air-dried, and the
contact angle is measured again.
4. Results
Implication:
The outstanding water repellency quality of GLASS
MOLECULE remains even after as many as 1,000 washes.
Test against Acidity/Alkalinity1. Foreword:
The purpose of this report is to test and state the effects of
acid or alkaline on GLASS MOLECULE. Samples are
soaked for one day in strong acid, weak acid, strong
alkaline, weak alkaline, or tap water for one full day. The
contact angle of each is measured to examine water
repellency.
2. Processing and preparation of samples
Metal sheets 5cm x 5cm in size are coated with GLASS
MOLECULE. After they air-dry, the pre-soak contact angle
is measured.
Contact Angle
Painted surface coated with GLASS
MOLECULE – Pre-wash
107.4±0.5
Painted surface coated with GLASS
MOLECULE – After 1,000 washes
105.3±0.5
3. Method of analysis:
2μL of water is dropped on each sample. The contact angle
at which the droplet touches the surface of the sample is
measured using the FTA-100. This procedure is done at
five different points on each sample and the average is
taken.
The following five solutions are prepared:
A. Strong acid solution – 1N concentrated
hydrochloric acid (pH<1)
B. Weak acid solution – 0.1N acetic acid (pH = 4.0)
C. Weak alkaline solution – 0.1N bicarbonate (pH = 9.0)
D. Strong alkaline solution – 1N sodium hydroxide (pH>13)
E. Neutral solution – tap water
A metal sheet coated with GLASS MOLECULE is soaked
in each of the solutions for 24 hours, removed, rinsed, and
air-dried. The contact angle of each is then measured.
4. Test Results
Solution Pre-soak Contact
Angle
Post-soak Contact
Angle
Neutral solution
110.0±0.5
110.5±0.9
Strong acid solution Paint peeled off
Weak acid solution 110.1±0.8
Weak alkaline solution 107.8±1.3
HYDRO EXPRESSHydrophobic Spray Polymer
• The most advanced spray polymer
• The missing link between washing and waxing
• A spray polymer that actually repels water
• Contains durable anti-static polymer
• Lasts up to 2 months
• Restores perfect finish
• Enhances reflections on shiny materials
• May also be used on glass, chrome and plastic
If you’re looking for a perfect finish to your detail, spray on NANOSKIN HYDRO
EXPRESS. It will not disappoint! Through the use of new nanotechnology formula,
NANOSKIN has created a spray polymer that actually repels water, dissipates
static, lasts up to 2 months, and adds additional protection to your finish.
NANOSKIN HYDRO EXPRESS can also be used on glass, chrome, and plastic.
The spray dries crystal clear on any surface and enhances reflections on shiny
materials, like chrome wheels and trim. It’s so easy, you can detail a full size car in
less than 10 minutes.
Directions:
1. Shake well. Use only on clean, cool paint and out of direct sunlight.
2. Mist HYDRO EXPRESS onto one section at a time.
3. Quickly spread product with clean dry microfiber towel.
4. Turn to a dry portion of the towel, then wipe dry.
16oz
VITALITYNano Spray Wax
• Water-based & silicone free formula
• Relentless water beading
• 2~3 months durability
• Adds anti-static polymer
• Conceals minor scratches and swirl marks
• Protects from harmful UV rays
• Wheel conditioner
NANOSKIN VITALITY is a water-based & silicone free spray wax. The combination
of advanced polymer and nano wax creates a long-lasting brilliant wet-look shine
with outstanding water repellency. Added anti-static polymer will help dust from
settling on the surface. Applying your wheels with VITALITY would also be a great
idea. VITALITY changes the surface polarity of your wheels to repel brake dust
particles.
Directions:
1. Shake well. Use only on clean, cool paint and out of direct sunlight.
2. Mist VITALITY onto one section at a time.
3. Spread product with clean dry microfiber towel.
4. Turn to a dry portion of the towel, then wipe dry.
16oz
MAJESTICHydrophobic Crème Wax
• Self-cleaning premium wax
• Relentless water beading
• Produces unbelievably deep, vibrant color and a dramatically
clear wet-look
• Protects against oxidation, corrosion, UV rays and
• surface degradation
• Fills and seals fine scratches
• High durability formulation
• Single stage and clear coat safe
MAJESTIC is a cream wax designed to add a high gloss and rich luster to new or
used vehicles. MAJESTIC contains nano-sized white carnauba which repels water
excellently and is much more efficient at filling and sealing fine scratches. This
premium wax is a self-cleaning, high durability formulation that is easy to use and
lasts consistent 3-4 months. Hand or machine application work equally well.
Shake well before using.
Directions:
1. Shake well. Use only on clean, cool paint and out of direct sunlight.
2. For hand application, use a wax applicator in overlapping, circular motion. Allow
to haze, then remove with a clean microfiber towel. Fold in quarters and rotate
often to maximize wax removal efficiency and help prevent scratches.
3. For orbital machine application, wax with slow speed (1200 rpm) and a clean
finishing foam pad.
16oz
HYDROPHOBICNano Paste Wax
• Advanced polymer based nano wax
• Deep gloss & Wet-look
• Water repellent
• Light cleaning properties
• Dries instantly
• Won’t stain trim
• Easy to apply and remove
NANOSKIN HYDROPHOBIC provides relentless water beading, and its nano-sized
polymer with light cleaning properties fills the pores of the paint. With unique nano
tech and formulated white carnauba, HYDROPHOBIC provides warm, wet shine
and deep gloss. Long-lasting hydrophobic effect keeps your ride clean and dust-
free as long as rain drops take dirt away. Apply in any direction you choose. Best
results are simply achieved by applying in very thin coats. As you may notice it
dries instantly. You can remove it immediately, or finish applying it to the rest of
your car.
Directions:
1. Rinse car with water to remove dirt and grease, then dry.
2. Using a clean applicator or soft pad, apply evenly to a section at a time using
overlapping, circular motions.
3. Allow to dry to a haze and wipe off with a clean dry cloth.
4. Buff lightly for a deep gloss shine.
250g
HYDROPHOBIC+Premium Nano Paste Wax
• New hydrophobic polymer formula
• Introduce a new dimension of gloss
• Provides relentless water beading
• Delivers unparalleled shine and protection
• Protects against UV rays and surface degradation
• Easy to apply and remove
NANOSKIN HYDROPHOBIC+ introduces a new dimension of gloss and protection.
It dramatically darkens color, brings out the full richness of the paint, and creates
clear, sharp reflections for the ultimate show car shine. New hydrophobic polymer
formula provides relentless water beading and protection against oxidation,
corrosion, UV rays and surface degradation. This new breakthrough technology
builds such incredible protection and surface tension that water beads up and just
glides off your paint finish, wash after wash!
Directions:
1. Rinse car with water to remove dirt and grease, then dry.
2. Using a clean applicator or soft pad, apply evenly to a section at a time using
overlapping, circular motions.
3. Allow to dry to a haze and wipe off with a clean dry cloth.
4. Buff lightly for a deep gloss shine.
150g
Description:
Nano vehicle wax means the wax which, if applied onto the paint surface or the
metallic stoving varnish on the body, will make it capable of nano characteristics.
Self-cleaning function means that after the nano vehicle wax is applied on the
surface, the water drop contact angle is over 100 degrees, and the body can be
easily cleaned by sponge and clean water.
• Nano vehicle wax shall meet the following requirements:
• Reference Information:
1. ISO 16700:2004(E):Microbeam Analysis -- Scanning Electron Microscopy --
Guidelines for Calibrating Image Magnification
2. CNS 6928 Method for testing the washability of the latex paint for indoor use
3. ASTM D3836-94(1999):Standard Practice for Evaluation of Automotive Polish
Performance Standard
Testing Method– See appendix 1 –
• Method for testing nano vehicle wax characteristics for details on testing nano
characteristics.
– See appendix 2 –
• Method for measuring contact angle of water drop for details.
– See appendix 3 –
• Method for testing sliding angle of water drops for details.
– See appendix 4 –
• Method for testing remaining water drops for details.
– See appendix 5 –
• Method for washing test for details on wash durability test.
Appendix 1
Method for testing the nano characteristics of nano vehicle wax
The nano structure formed by applying the wax onto
the vehicle paint surface shall be analyzed by scanning
electron microscopy.
1. Equipment
See ISO 16700:2004 (E): Microbeam Analysis -
Scanning Electron Microscopy - Guidelines for
Calibrating Image Magnification for the
requirements on the microscopy.
2. Preparing the testing piece
The test piece is a piece of painted sheet in the size
of 1cm x 1cm and treated by base, color and
surface coating (clear coat).
Directly apply the vehicle wash wax onto the test
piece for testing; attach the test piece flatly on the
fixer of the scanning electron microscopy; see ISO
16700:2004 (E) for details on preparing the test
piece.
Adjust the magnification rate appropriately to
observe the dimensions of the nano structures
formed on the surface of waxed test piece. (In the
case below, the magnification rate is 50,000X).
3. The principles behind the test
The electron microscopy provides the characteristics
of the nano materials such as the dimensions,
distribution and shape on the basis of the signals
produced by the effect between the electron and
substance. Compared with other methods, in
addition to the direct measurement of the
dimensions, the biggest advantage of microscopy
lies in that the captured images can be used to tell
the in what shape the powder is and it can also be
used on materials with dimensions ranging from
nanometers to microns.
4. Precautions during the test
4.1 The test is a dry test, and do not dip the test
piece into solutons.
4.2 The system must be extracted to vacuum
pressure and anything that can easily
contaminate the vacuum chamber must be
dealt with.
4.3 The testing equipment must be first validated
with traceable standard test piece to ensure its
accuracy.
4.4 The test piece may be gold plated if necessary
to improve its readability in the system.
5. How to present the test results
The test report shall comprise the following:
5.1 Test date/place/instrument model number
5.2 Source of the test piece or the manufacturer
5.3 Treatment conditions before waxing the test
piece
5.4 The hydrophobic structures in the product
specifications must appear and at least one
dimension must be below 100 nm on average,
as shown in Figure A.
Figure A. Analyzing the surface structure on the paint
surface after the nano vehicle wax sold in the market is
applied by electron microscope.
Figure B. Analyzing the surface structure on the
paint surface after the non-nano vehicle wax sold
in the market is applied by electron microscope.
Appendix 3
Method for testing water drop sliding angle
1. Device and equipment
Device for testing water drop sliding: a platform, the
sloping angle of which can be adjusted and thus the
water drop sliding angle can be measured.
The following picture may serve as a reference for
such a platform:
2. Preparing the test piece
The test piece is a white painted plate in the size of
25cm x 50cm and treated with base, color and
surface coating (clear coat).
3. Treating the test piece
Directly apply the nano vehicle wax on the test piece
and polish it evenly as waxing a vehicle.
4. Test method
Apply a drop of 50 uL volume by a syringe onto the
test plate, adjust the angle for zero degree and
record the angle when the drop begins to slide. The
water sliding degree may be read as precisely as 1
degree.
5. How to present the test results:
The test report should comprise:
5.1 Test date/place
5.2 Source and manufacturer of the painted test
piece.
5.3 Treatment conditions before waxing the test
piece
5.4 Average sliding angle value after the surface is
waxed.
Appendix 4
Method for testing remaining water drops
1. Device and equipment
Use the device for testing sliding water drops shown
in appendix 3 as the reference; however, above the
platform there must be a water storage cup, from
which water can drop.
2. Preparing the test piece
The test piece is a white painted plate in the size of
25cm x 50cm and treated with base, color and
surface coating (clear coat). The test piece can form
a sliding pathway because one side of the test piece
is about 80 cm longer than the other side.
3. Treating the test piece
Directly apply the nano vehicle wax on the test piece
and polish it evenly as waxing a vehicle.
4. Test method
The sloping angle of the testing plate is fixed at 30
degrees. Add 1 ml ink into 1 L water. Adjust the flow
adjustment valve on the cup so that the water can
drop onto the plate at the flow rate of 50 mL/min;
after about half an hour, calculate the percentage of
lattices with remaining water drops in transparent
acrylic plate with one thousand lattices, as shown in
the picture below . Obtain the mean by repeating
the test for three times.
5. How to present the test results:
The test report should comprise:
5.1 Test date
5.2 Source and manufacturer of the painted test
piece.
5.3 Treatment conditions before waxing the test
piece
5.4 The average percentage of repetitions of tests
and the lattices where water drops remain.
Appendix 5
Method for washing test for details on wash durability test.
1. Device and equipment
Device for wash durability test: using a device which
meets the provisions in CNS 6928:1981 “Method for
testing wash durability of latex paint for indoor use”.
2. Preparing the test piece
The painted test piece is a white painted plate in the
size of 5cm x 5cm and treated with base, color and
surface coating (clear coat).
3. Treating the test piece
Directly apply the nano vehicle wax on the test
piece and polish it evenly as waxing a vehicle.
4. Test method
4.1 Fix the test piece onto the platform for wash
durability test.
4.2 Fix a sponge or brush and the friction surface is
kept wet by neutral soap water and frictions the
test piece surface.
4.3 Washing back and forth is counted as one time
the friction times are set at 1000.
4.4 Remove the test piece when the test is
completed, clean it with water, dry it in wind and
measure the contact angle.
5. How to present the test results:
The test report should comprise:
5.1 Test date
5.2 Source and manufacturer of the painted test
piece
5.3 Treatment conditions before waxing the test
piece
5.4 The manufacturer and model of the device for
wash durability tests.
5.5 How many times the test piece is washed and
the washing conditions.
Paint Protection
Glass Protection
Wheel Protection
Leather, Vinyl, Rubber, Tire & Plastic Protection
Fabric & Carpet Protection
Cleaners, Degreasers, Shampoo, Scents, Maintenance
Polishes
Solvents
RAINGlass Sealant
• Water-based formula
• Seals the microscopic pores of glass
• Contains durable anti-static polymer
• Repels rain, sleet, and snow
• Maintain a high level of visibility
• Significantly improves scratch resistance
• Lasts months, not weeks
RAIN provides a durable, invisible coating to your windshield giving it rain
repellency. The invisible coating repels rain, sleet, and snow to maintain a high
level of visibility, dramatically improving weather driving visibility. The treatment
also makes for easy removal of ice, frost, salt, mud and bugs. RAIN contains
durable anti-static polymer which will help dust from settling on your glass. RAIN
also significantly improves scratch resistance.
ALWAYS USE YOUR WINDSHIELD WIPERS AS NECESSARY.
Directions:
1. Clean with glass cleaner and thoroughly dry surfaces before treating.
2. Mist RAIN onto the surface evenly.
3. Spread product with clean dry lint-free microfiber towel.
4. Turn to a dry portion of the towel, then wipe dry.
5. Reapply RAIN to ensure complete and uniform coverage, then wipe dry.
6. Wait 10~15 minutes, then sprinkle with water or glass cleaner and wipe with a
dry lint-free towel until crystal clear.
16oz, 1Gal
RAIN PLUSHydrophobic Glass Treatment
• Advanced fluorosilane polymer technology
• Exceptional oil & water repellent
• Repels rain, sleet, and snow
• UV resistant
• 12~18 month durability
• Applies to exterior glass
RAIN PLUS is a solvent-based glass treatment by using advanced fluorosilane
polymer technology. The invisible coating provides exceptional oil & water
repellency while maintaining a high level of visibility, dramatically improving
weather driving visibility. With strong UV resistance, the coating has average
12~18 month durability. RAIN PLUS also makes for easy removal of ice, frost,
salt, mud and bugs.
ALWAYS USE YOUR WINDSHIELD WIPERS AS NECESSARY.
Directions:
1. Clean with ammonia glass cleaner and let it sit on the surface for 3~5 minutes
then wipe off with lint-free glass towel.
2. Mix part A & part B and shake for 90 seconds.
3. Apply mixed product onto the surface , and spread product with non-woven
towel.
4. Allow to haze.
5. Wipe off the haze with lint-free glass towel.
16oz
ANTI-FOGInterior Glass Anti-Fog Treatment
• Eliminates and prevents interior fogging and steaming instantly!
• Contains durable anti-static polymer
• Windshields, side and rear windows
• Safe for painted surfaces
ANTI-FOG provides a durable, invisible coating to your interior glass preventing it
from fogging and steaming. The invisible coating maintains a high level of visibility,
dramatically improving weather driving visibility. ANTI-FOG contains durable anti-
static polymer which will help dust from settling on your interior glass.
Directions:
1. Clean with glass cleaner and thoroughly dry surfaces before treating.
2. Mist ANTI-FOG onto the surface evenly.
3. Quickly spread product with clean dry lint-free microfiber towel.
4. Turn to a dry portion of the towel, then wipe dry.
5. Reapply ANTI-FOG to ensure complete and uniform coverage, then wipe dry.
6. Wait 10~15 minutes, then sprinkle with clear water and wipe with a dry lint-free
towel until crystal clear.
16oz
ADDITIVEWindshield Washer Fluid/Glass
Cleaner Additive
• Provides residual water beading after use
• Helps revitalize glass sealant
• Improves ordinary washer fluid/glass cleaner performance
ADDITIVE is specially formulated to add to your windshield washer fluid/glass
cleaner. ADDITIVE provides residual water beading after use and helps revitalize
glass sealant. This powerful formula will also help improve ordinary washer fluid
performance to remove stubborn residue, road grime, bird droppings, and tree sap.
General dilution is 1-2 ounces per gallon of washer fluid/glass cleaner.
This bottle shall contain enough additive to treat 12 gallons of washer fluid/glass
cleaner.
ALWAYS USE YOUR WINDSHIELD WIPERS AS NECESSARY.
Dilution:
4 caps of ADDITIVE to 1 gallon of washer fluid/glass cleaner
Directions:
For Windshield Washer Fluid-
Add 4 caps of ADDITIVE to 1 gallon of “off the shelf” windshield washer fluid.
For Glass Cleaner-
Add 4 caps of ADDITIVE to 1 gallon of “ready to use” glass cleaner.
16oz
Paint Protection
Glass Protection
Wheel Protection
Leather, Vinyl, Rubber, Tire & Plastic Protection
Fabric & Carpet Protection
Cleaners, Degreasers, Shampoo, Scents, Maintenance
Polish
BRAKE DUSTWheel Protective Shield
• Creates a firm barrier
• Hardens to form a protective shield
• Repels brake dust and road grimes
• Amazing heat resistance
• Relentless water beading
• Spray-on, leave-off
• Single stage and clear coat safe
NANOSKIN BRAKE DUST is a scientific breakthrough that introduces a new
dimension of wheel protection. This formula forms an amazing heat resistant
barrier that repels brake dust and road grime. New hydrophobic polymer provides
relentless water beading and protection against conventional acidic wheel
cleaners. This breakthrough technology builds such incredible protection that
wheels stay cleaner longer and clean up easier. A harsh wheel cleaner will no
longer be necessary.
Directions:
1. Clean and thoroughly dry surfaces before treating.
2. Mist BRAKE DUST onto the surface until the surface is fully covered.
3. Allow to dry.
16oz, 1Gal
Paint Protection
Glass Protection
Wheel Protection
Leather, Vinyl, Rubber, Tire & Plastic Protection
Fabric & Carpet Protection
Cleaners, Degreasers, Shampoo, Scents, Maintenance
Polishes
Solvents
LV RINSELeather & Vinyl Cleaner
• Non-alkaline cleaning agents
• Contains no waxes, oils or additives
• Loosens and suspends the dirt without leaving any deposits or
impediments
• Falls within the Ph range of leather itself.
• Safer for leather
LV RINSE Leather & Vinyl Cleaner is a blend of selected, non-alkaline cleaning
agents designed to clean leather safely and thoroughly without the harshness or
potentially damaging effects of saddle soaps, which are alkaline. The foaming
action loosens and suspends the dirt so that it can be easily rinsed away without
leaving any deposits or impediments. Its balanced formula falls within the pH range
of leather itself, and therefore, is safer for leather. Since it is alkaline-free it
contributes to the prolongation of fiber life.
NOTE: This product is not recommended for napped suede or glove soft leather.
Leather that has cracked from age or neglect cannot be restored by this or any
other known product.
Directions:
1. Remove all loose dirt by vacuuming.
2. Mist a damp towel with LV RINSE and massage into the upholstery. Particularly
soiled areas may require agitation with a white tampico brush or horsehair
brush.
3. Use the cleaner sparingly and do not allow it to dry on the upholstery.
4. Wipe away excess cleaner with a clean, dry microfiber towel.
16oz, 1Gal
NOURISHLeather & Vinyl Cleaner/Conditioner
• One step leather cleaner and conditioner with UV absorber
• Contains the finest natural oils for leather
• Leaves leather soft and supple
• Restores new appearance and natural feel to leather
• Makes scratches and abrasions less visible
• Help penetrates, softens and lubricates leather
• Easy to use: Spray on and wipe off
NOURISH is a one step leather & vinyl cleaner and conditioner. Its unique UV
absorber help protect against premature aging and damage from harmful UV rays.
NOURISH contains the finest natural oils for all type of leather, and it restores new
appearance and natural feel while leaving leather soft and supple. Its liquid
formula conditions and makes scratches & abrasions less visible. NOURISH may
be used on all interior leather, vinyl and plastic.
NOT FOR USE ON NUBUCK OR SUEDE.
Directions:
Use on any color.
1. Always test the product in an inconspicuous area to make sure treated surface
is acceptable.
2. Directly spray onto the leather or apply with clean soft cloth.
3. Brush into leather.
4. Buff gently with soft cloth.
16oz, 1Gal
FEEDLeather & Vinyl Protectant
• Water, oil and stain repellent for finished leathers
• Partially fluorinated polymer
• Exceptional oil, water and alcohol repellency
• Meets all VOC regulations
• Ambient cure
• Little or no effect on appearance of finished leather
• Easy to apply – Gently rub Into leather, wipe off excess
NANOSKIN FEED is a ready‐to‐use cream that protects finished leathers without
altering the feel or appearance of the leather. Unlike many protectors, it does not
leave the leather with an artificial sheen. Its fluorinated polymer provides
exceptional oil, water and alcohol repellency while meeting all VOC regulations.
Apply in a circular motion using a lint free cloth, wiping off any excess after
working it into the leather. FEED may be used on auto interior leather & vinyl,
leather upholstery, leather apparel: shoes, pants, jackets, skirts, luggage,
briefcases and handbags.
NOT FOR USE ON NUBUCK OR SUEDE.
Directions:
1. Working on a clean, dry surface yields the best result.
2. Wipe onto the leather with a soft dry lint-free cloth.
3. Let the product set on leather for approximately 5 minutes.
4. Wipe off excess with soft dry lint-free cloth.
16oz, 1Gal
Before
Left: water drop
Right: cook oil drop
After
Left: water drop
Right: cook oil drop
Performace
Water/Alcohol Repellency Drop Test
(Dupont Test Method)
• Introduction
Repellency was measured by applying 3 drops of
test liquid and observing wetting of the surfaces. If
the drops were repelled for longer than 10 second
the surface was judged to be repellent to that test
liquid.
• Preparations and Treatment of Samples
Test liquids ranged from 2% Isopropyl Alcohol (1
rating) to 50% Isopropyl Alcohol (6 rating)
• Test Method
The higher the concentration of Isopropyl Alcohol
(higher number rating), the more repellent the
surface.
• Analysis Result
All leathers repelled 50% Isopropyl Alcohol and
were rated a 6 in water repellency.
Oil Repellency Drop Test
(AATCC Test Method 118-1989)
• Introduction
Repellency was measured by applying 3 drops of
test liquid and observing wetting of the surfaces. If
the drops were repelled for longer than 30 seconds
the surface was judged to be repellent to that test
liquid.
• Preparations and Treatment of Samples
Test liquids ranged from mineral oil (1 rating) to
Decane (6 rating).
• Test Method
The higher the number test liquid, the more
repellent the surface. Decane (6 rating) is more
difficult to repel than Dodecane (5 rating), which is
more difficult than Tetradecane (4 rating) and so
forth.
• Analysis Result
All leathers repelled at least a 4 oil and most
repelled a 5 or a 6 oil with the average of all
surfaces tested equal to 5.3 out of 6.
BLACK AWESOMEVRT Dressing & Protectant
• Silicone-free, water-based formula
• produces an incredibly deep, rich high gloss shin
• provides long-lasting UV absorber and water proof
• Imparts high gloss to vinyl, rubber, tire, plastic, leather, wood
and stone
• Dilutes up to four to one, varying the gloss from high to satin
• Vinyl, rubber, tire, plastic, leather, wood and stone.
• Clear coat safe
BLACK AWESOME is the choice for professionals or end-users looking for a high
performance dressing which can be used in any silicone sensitive environment. Its
VOC compliant water based formula produces an incredibly deep, rich high gloss
shine. By using advanced polymer, it provides long-lasting UV absorber and
actually repels water each time you clean your car. Dilute up to four to one, varying
the gloss from high to satin. One product, multiple uses...vinyl, rubber, tire, plastic,
leather, wood and stone.
Dilutions:
Tire (High gloss) RTU ~ 1 : 1
Tire (Satin gloss) 1 : 1 ~ 2 : 1
Leather, Vinyl, Rubber & Plastic 2 : 1 ~ 3 : 1
Wood & Stone 3 : 1 ~ 4 : 1
Directions:
1. Dilute one part of product up to four parts of water.
2. Spray directly on the surface or toweling and apply evenly to avoid streaking.
3. Wipe off excess.
16oz, 1Gal
WET LOOKTire Dressing
• Silicone based dressing
• Super high shine
• Tire, rubber moldings & bumpers
• Quick dry, low sling-off formula
• Highlights your great looking investment
• Works great on wet tires
You have waxed and polished your vehicle, removed stains and odors and looked
after the upholstery and leather. Now it's time to tackle the shine of your tires.
Nothing gets noticed more quickly after waxing than your glossy tires. NANOSKIN
WET LOOK Tire dressing is a super high shine, silicone based, dressing for
exterior surfaces. Brush or sponge application is recommended. Quick dry, low
sling-off formula works great on wet tires. WET LOOK really completes "the look“
that auto detailers want.
Directions:
1. For best results, apply to a clean, dry surface.
2. Spray or wipe on surface and let dry to a beautiful shine.
16oz, 1Gal
Paint Protection
Glass Protection
Wheel Protection
Leather, Vinyl, Rubber, Tire & Plastic Protection
Fabric & Carpet Protection
Cleaners, Degreasers, Shampoo, Scents, Maintenance
Polishes
Solvents
FABRICFabric & Carpet Protector
• Creates a protective finish
• Effectively resists soils and stains
• Safe for all types of fabrics and fibers
• Water & oil repellent
• Dries quickly
• Spray-on, leave-off
• Home, office, boat, auto, and many other applications
NANOSKIN FABRIC is a professional strength treatment that creates a protective
finish that effectively resists soils and stains. It is safe for all types of fabrics and
fibers including silk and sisal. Soils and spills simply blot from the surface. FABRIC
is easy to use, and the solvent formulation dries quickly. Perfect for use wherever
your valuable investments need to be protected from stains and spills: in the
home, office, boat, auto, and many other applications.
Directions:
1. Apply to any new or cleaned fabric.
2. Test fabric for color stability before use.
3. Hold applicator 8 to 10 inches away and spray in a sweeping motion.
4. Do not saturate. A light coating is all that is needed.
5. Allow 1 hour drying time before using treated fabric.
NOTE: FABRIC will migrate (spread) and penetrate fabric extremely well. Over
saturation will result in prolonged drying time.
16oz, 1Gal
Prepare a chamois
Center treated with FABRIC
After cured, put into a tray with water
Apply several water drops & oil drops
onto the treated center area
Left 4 drops: water drop
Right 7 drops: oil drop
Applications
• Test fabric for color stability before use.
• Spray evenly until fabric is slightly damp to the
touch.
• May be applied after immediately after wet or dry
cleaning.
• After application, allow fabric to dry before use.
• Product will cure in 2 stages.
– Stage one at 24 hours.
– Stage two at 72 hours.
• After curing, protector will last 30-40 dry cleanings.
Coverage per gallon
Performance
Carpet Drapery
Low Pile 1200-2400
sq. feet
Light
Weight
1500-3000
sq. feet
Medium Pile 1000-2000
sq. feet
Medium
Weight
1150-2300
sq. feet
High Pile 800-1600
sq. feet
Heavy
Weight
800-1600
sq. feet
Upholstery-
One pint (16oz) covers an average 6 foot sofa
Why is oil repellency important?
At one time or another our carpet or fabrics come in
direct contact with oils, whether it’s oil from our shoes,
cooking oil from our stoves, or body oil from our skin.
NANOSKIN FABRIC is formulated to repel oil helping to
keep the fabric cleaner for a longer period of time. We
believe, as some industry and university studies
indicate that silicone treatments can cause the fabric or
carpet to re-soil at a much faster rate.
Why is UV absorber important?
As you can see when the wave lengths reach the point
that they become visible light (around 380). The
absorbers do not modify (absorb) them or it would
cause the light to be a different color. It is very
important not to block the light or the colors of the
carpet / fabric or it would appear different then its
intended color. For example, instead of a sofa looking
green it may in fact look light blue.
UV Scan
• Harmful UV rays are in the 250 - 350nm range.
• As you can see from the graph, we're showing
absorption from the 190 to 370nm range as noted
by the red line.
• This test was run with a 1% solution of FABRIC with
UV absorber.
• The reason we could not run it with 100% product
is because it absorbed so much that it would be off
the top of the chart and you wouldn't be able to see
anything but a flat line across the top of the chart.
LIQUID IRONWrinkle Release
• Relaxes fibers
• Allows for wrinkle to be easily smoothed away
• Ideal for heat-sensitive fabrics where cool ironing is
recommended
• Anti-static spray & fabric softener
LIQUID IRON Wrinkle Release is a water-based fabric treatment that is effective in
reducing wrinkles in most fabrics. This pH neutral, color safe treatment can be
sprayed on casual clothes for hang drying to reduce wrinkles, or can be applied
during ironing to give clothing a pressed appearance without being stiffened by
starch.
Directions:
Use before or after drying.
Water sensitive fabrics (such as silk or rayon) should be tested first in an
inconspicuous area.
To effect less wrinkling on fabrics in the drying cycle, spray fabrics as they are
transferred from the washer.
In Hang Drying Application-
Simply hold the fabric no more than 1 foot from the spray applicator, and apply
lightly with a sweeping motion to the wrinkled area.
Use more spray for heavy fabrics or severe wrinkling.
For Severe Wrinkling-
Some smoothing of the fabric by hand or with a cold iron will remove wrinkles
faster and more effectively. Fabrics which have been dried and show wrinkling can
be treated and dried at low heat to remove wrinkles quickly and completely.
16oz
Paint Protection
Glass Protection
Wheel Protection
Leather, Vinyl, Rubber, Tire & Plastic Protection
Fabric & Carpet Protection
Cleaners, Degreasers, Shampoo, Scents, Maintenance
Polishes
Solvents
BUBBLE BATHHydrophobic Shampoo
• Super-concentrated
• Dilution 127 : 1
• Added hydrophobic polymer protection
• Relentless water beading
• Extremely slick
• Nice glossy finish
• Will not strip wax
NANOSKIN BUBBLE BATH is a super concentrated wash solution for all type of
paint finishes. Its hydrophobic polymer formula lubricates the surface, deepens
gloss and leaves a highly water repellent surface. BUBBLE BATH will not remove
wax, yet easily washes away all traces of grease, dirt and grit that have
accumulated since your last wax. BUBBLE BATH works extremely well at cutting
through road salt and winter grime. General dilution is 1 ounce per gallon of water.
Directions:
1. Mix 1 oz per gallon of water.
2. Rinse surface with water to flush away loose dirt.
3. Wash and rinse in sections.
4. Begin with the roof, and work the suds down to the hood, trunk and sides.
5. Rinse with clean water.
6. Dry with clean and soft towels.
For Automatic Car Wash Systems-
1. Dilute 1 gallon of BB to 10 gallons of water.
2. Adjust metering system for maximum foam and cleaning performance.
16oz, 1Gal
GREASE FREEGlass Sealant
• Water-based formula
• Cleans engines, trunks, door jams, wheels, tire
and rims
• Safe for most under-the-hood rubber and plastic parts
GREASE FREE is a concentrated water base power cleaner and degreaser. It
dilutes with water and cleans a variety of surfaces. For engines and greasy door
jams, dilute one part of GF with three parts of water. For medium duty degreasing,
dilute one part of GF with nine parts of water. For general cleaning, dewaxing or
other light duty work, dilute one part of GF with nineteen parts of water. Safe for
most under-the-hood rubber and plastic parts. Great for stubborn spots and stains.
Dilutions:
Heavy Duty Degreasing 3 : 1
Medium Duty Degreasing 9 : 1
General Cleaning, Dewaxing 19 : 1
Directions:
1. Dilute with water to designed strength.
2. Spray or wipe on surface.
3. Brush or wipe as needed.
4. Rinse surface with water.
16oz, 1Gal
BRIGHTWheel, Tire & Metal Cleaner
• Removes grease, road grime, light oxidation and brake dust
• Safe on all types of tires and wheels
• Non-corrosive to skin and metal
• Removes water spots, safe for glass & paint
• No guess work anymore
BRIGHT is a low Ph organic salt that performs like an acid. It is non-corrosive to
skin and metal per DOT/TDG test protocol, non-fuming and is DOT “Non-
Regulated”. BRIGHT safely removes grease, road grime, light oxidation, and brake
dust from metal, paint and other hard surfaces. Safe on all types of wheels
including clear coated, painted, aluminum, polished and anodized. Great for
removing water spots. New technology chemically embraces and lifts mineral
deposits and protect surface from future water spots.
NOTE: BRIGHT can be used to replace HCL acid in many applications and offers
significant performance advantages vs. acids such as phosphoric, citric,
hydroxyacetic, sulfamic, oxalic, etc. with regards to removal of calcium, lime and
rust.
Dilutions:
Wheels & Rims 9 : 1
Water Spot Remover 9 : 1
Diamond Plate 9 : 1
Car & Truck Washing 250 : 1
Directions:
1. Eye protection is recommended. 2. Test an inconspicuous spot for surface
compatibility. 3. Spray even on cool, dry surface. 4. Allow to soak for 1 to 4
minutes. 5. For extremely dirty wheels and tires, agitate with a soft brush or
sponge. 6. Stand away from surface and hose off thoroughly with strongly
water spray. 7. Dry surface immediately with a clean, soft towel to prevent
water spots.
16oz, 1Gal
CRYSTAL-CLEARVOC Free Glass Cleaner
• VOC Free
• Contains no harmful or harsh chemicals, including
ammonia or alcohol
• Uses an ultra-fine polishing agent
• No streaks, no smears
• Safe for glass, ceramics, stainless steel, acrylics, paint surfaces,
polystyrene, ABS and polycarbonate
CRYSTAL-CLEAR highly concentrated VOC Free Glass Cleaner contains no
harmful or harsh chemicals, including ammonia or alcohol that damages your car
or the environment. By using an ultra-fine polishing agent, it gently removes dirt
and grime from glass and clear plastic by polishing it away. The final result is a
polished finish without streaks or smears. Safe for use on glass, ceramics,
stainless steel, acrylics, paint surfaces, polystyrene, ABS and polycarbonate.
Dilution:
40 : 1
Directions:
1. Dilute with water to designed strength.
2. Spray or wipe on surface.
3. Wipe with a clean dry towel or glass towel for a sparkling clean surface.
TIPS: All glass cleaners are sensitive to dirty towels. So, if you use a towel that's
previously been used for polishing or waxing, remaining product residue is bound
to leach out and smear your glass. Dedicated glass towels are your best bet.
16oz, 1Gal
UPHOLSTERYInterior Cleaner & Shampoo
• Superior anti-stain, anti-resoiling properties
• Helps to keep the surfaces cleaner and stain free longer
• Removes oil, grease, dirt, blood, wine, coffee and most
substances
• Cleans soil and spots without removing the natural sheen of any
fine finish
• May also be used on automotive trunk or home carpet
• Environmental friendly
• Biodegradable
UPHOLSTERY Interior Cleaner and Shampoo cleans all interior surfaces without
harmful effects. Specially designed for today’s surfaces, UPHOLSTERY offers
superior anti-stain, anti-resoiling properties helping to keep the surfaces cleaner
and stain free longer. It removes oil, grease, dirt and most substances that stain all
automotive interior surfaces, trunk or home carpet. Using unique cleaning
technology, the best part is that the carpet or fabric will not be altered after
cleaning.
Dilutions:
Pre-Spray 15 : 1 (8oz per gallon)
Extraction Cleaner 63 : 1 (2oz per gallon)
Spot Remover 7 : 1 (16oz per gallon)
Hard Surface Cleaner 127 : 1 (1oz per gallon)
Directions:
Dilute with water to designed strength. 1. Remove all loose dirt by vacuuming.
2. Apply UPHOLSTERY and agitate. 3. Use a carpet cleaning brush for stubborn
spots. 3. Wipe with clean dry towels or vacuum with a WET/DRY vacuum.
4.Allow to air dry.
16oz, 1Gal
When you see the DfE label on a product,
what does it mean?
• EPA allows safer products to carry the Design for the Environment (DfE) label. This
mark allows consumers to quickly identify and choose products that can help
protect the environment and are safer for families.
• When you see the DfE logo on a product it means that the DfE scientific review
team has screened each ingredient for potential human health and environmental
effects and that-based on currently available information, EPA predictive models,
and expert judgment-the product contains only those ingredients that pose the least
concern among chemicals in their class.
• Product manufacturers who become DfE partners, and earn the right to display the
DfE logo on recognized products, have invested heavily in research, development
and reformulation, to ensure that their ingredients and finished product line up on
the green end of the health and environmental spectrum, while maintaining or
improving product performance.
• EPA's Design for the Environment Program (DfE) has allowed use of their logo on
over 2000 products. These products are formulated from the safest possible
ingredients and have reduced the use of "chemicals of concern" by hundreds of
millions of pounds.
How do I know products bearing the DfE label
are really safer?
• Looking carefully at product ingredients
DfE starts with information that scientists already know about each ingredient such
as how it works in a detergent, and how it affects living things. Where that
information doesn't tell the full story, EPA looks at an ingredient's chemical structure
- its components and shape - to understand how it could impact the environment
and people. A chemical's structure can tell a lot about how the chemical will behave
and what types of effects it may have when it comes in contact with people or the
environment. DfE uses the special skills of the scientists at EPA who have studied
chemicals for 30 years or even longer.
• Allowing logo for best in class products only
DfE compares an ingredient's characteristics to other chemicals in the same class.
That is, solvents are compared to other solvents, and wetting agents (surfactants)
are compared with other surfactants. Before DfE allows the logo on a product, DfE
makes sure that only the safest ingredients from each class are used.
• Protecting your family and the environment
When you use a cleaning product, it is released into the environment-inside your
home and down the drain to the outdoors. Adults come in contact with cleaning
products on a regular basis, as do children who are often the most exposed when
they crawl on the floor. Some consumers may prefer cleaning products that, for
example, are inherently safer or do not irritate sensitive skin. Others may prefer
products that break down quickly and do not harm fish or are safer for use around
family pets. The DfE logo is an easy way to know you are choosing a product that is
as safe as possible for people and the environment.
• Expect the safest possible ingredients
When the DfE logo appears on a product, it means that the DfE review team has
screened each ingredient in the product for potential human health and
environmental effects and that--based on hazard and risk information, the latest
models and predictive tools, and expert scientific judgment--the product contains
only those ingredients that pose the least concern among chemicals in their class.
For example, if a DfE-recognized product contains a surfactant, then that surfactant
will not be toxic to human health and it will biodegrade readily to non-polluting
degradation products; many surfactants in conventional products biodegrade slowly
or biodegrade to more toxic and persistent chemicals, which threaten aquatic life.
• DfE formulator review is especially discriminating and protective
The DfE Program is unique because of two defining characteristics: its assessment
methodology and its technical review team. The DfE technical review team has
many years of experience and is highly skilled at assessing chemical hazards,
applying predictive tools, and identifying safer substitutes for chemicals of concern.
The review team applies the DfE assessment methodology by carefully reviewing
every product ingredient (The review includes all chemicals, including those in
proprietary raw material blends, which manufacturers share with DfE in
confidentiality).
SMOOTHInstant Detail Spray
• Missing link between washing and waxing
• Restores the brilliance of a showroom finish
• A clay lubricant
• Can be used on glass, chrome, and plastic
• Enhance reflections on shiny materials
• Home, office, boat, auto, and many other applications
If you’re looking for a missing link between washing and waxing, spray on
NANOSKIN SMOOTH. It removes minor contaminants, dust, fingerprints, bugs,
and more, restoring the brilliance of a showroom finish. As a good friend of clay
bar, SMOOTH lubricates the paint so well while rubbing the clay back and forth. It
can also be used on glass, chrome, and plastic. The spray dries crystal clear on
any surface and enhances reflections on shiny materials, like chrome wheels and
trim. It’s so easy and you can detail a full size car in less than 10 minutes.
Directions:
1. Shake well. Use only on clean, cool paint and out of direct sunlight.
2. Mist SMOOTH onto one section at a time.
3. Quickly spread product with clean dry microfiber towel.
4. Turn to a dry portion of the towel, then wipe dry.
16oz
WATERLESSWaterless Wash
• Spray, wipe, shine, protect
• Water-based & enviro-friendly
• Removes bugs, dirt, road grime & contaminants
• Designed for paint, glass, chrome & plastic
• Works well at cutting through road salt and winter grime
• Home, office, boat, auto, and many other applications
WATERLESS is a water-based, enviro-friendly blend of wetting agents, emulsifiers
and protectants. It emulsifiers, lifts and remove bugs, dirt and light to medium
surface contaminants. Not for excessively soiled, muddy or caked on dirt.
Designed for all exterior surfaces. Works on all paint, metal, plastic, chrome and
glass. Does not smear or streak. Perfect shine in seconds.
Directions:
1. Spray on surface and let set for 10 seconds.
2. Wipe off with a clean, dry terry cloth or microfiber.
3. For difficult spots, repeat and let soak on surface longer to work, then wipe off.
4. When towels are soiled, use a clean towel.
16oz
SILVER BULLETAll Metal Cleaner & Polish
• Restores mirror bright shine of all types of metals in seconds
• Wheels - Rims – Chrome – Diamond Plate
• Cleans plastic headlights
• Safe for painted surfaces.
SILVER BULLET is the perfect all metal cleaner & polish. It removes minor
scratches and dullness. It restores the sparkle and shine to Aluminum, Brass,
Chrome, Copper, Gold, Magnesium, Pewter, Silver, and Stainless Steel. SILVER
BULLET cleans plastic headlights and restores the clear, bright appearance. Safe
for painted surfaces.
Directions:
1. Shake well before using.
2. Apply a small amount on a soft cloth and rub on surface until it becomes black.
3. Buff of polish residue to an amazing Silver Bullet shine.
4. Repeat if necessary on badly tarnished or oxidized surfaces.
16oz
ESSENCEOdor & Stain Eliminator
• Deodorizes bad odors, not an odor mask
• Removes stains caused by pet urines, wine and some yellow
stains
• Provides anti-resoiling protection
• Safe on wool
• Wide variety of applications
• Home, office, boat, auto, and many other applications
ESSENCE is not only an odor eliminator but also a stain remover. It deodorizes
bad odors caused by spilled milk souring, smoke lingering, or pet odors, not an
odor mask or cover, and it’s Safe on Wool. ESSENCE also removes stains caused
by pet urine, perfume, wine and some yellow stains. Apply directly to stains as
soon as possible to help prevent permanent damage to carpet or fabric dyes.
Directions:
Odors are primarily trapped in fibers, so apply to carpets, upholstery and other
fabric surfaces.
For Odor-
1. Spray light coat evenly over affected areas until surface is damp. Do not
saturate.
2. Allow product to penetrate and self-dry, no rubbing required.
For Stain-
1. Mist Essence onto the surface.
2. Blot with absorbent toweling.
3. Flush with water if necessary.
16oz
Paint Protection
Glass Protection
Wheel Protection
Leather, Vinyl, Rubber, Tire & Plastic Protection
Fabric & Carpet Protection
Cleaners, Degreasers, Shampoo, Scents, Maintenance
Polishes
Solvents
HD CUTHD Rubbing Compound
• Removes 1000 to 1500 sanding marks
• Prepares surfaces for wax or glaze
• Contains no wax or silicone
NANOSKIN HD CUT is a super fast acting compound that removes 1000 to 1500
grit sanding marks, heavy oxidation, and other serious paint imperfections and
defects from all types automotive paint surfaces. It contains no silicone, no wax,
and no fillers.
Directions:
Shake well. Apply to a cool surface.
Hand-
1. Apply a small amount on a clean, soft cloth.
2. Rub on surface using light pressure to desired finish.
3. Wipe off excess with a clean, soft cloth or micro fiber towel.
Machine-
1. Apply to buffing pad and biff with light to medium pressure to desired finish.
2. Wipe off excess with a clean, soft cloth or microfiber towel.
16oz, 1Gal
FIRST CUTPolishing Compound
• Removes sanding marks and paint defects
• Contains no silicone, wax, or fillers
• Safe for all paints
NANOSKIN FIRST CUT is the first step compound to remove sanding marks,
oxidation, and paint defects from all automotive paints. It's unique combination of
diminishing gentle abrasives, fine polishing powders, and chemical cleaning
agents, deliver a low dust application. The perfect first step set up for
NANOSKIN COMPOLISH Ultra Fine Polishing compound. It contains no silicone,
no wax, and no fillers.
Directions:
Shake well. Use only on clean, cool paint and out of direct sunlight.
Hand-
1. Apply a small amount to a soft cloth and rub on the surface until the scratches
are removed.
2. Wipe off residue and apply wax or glaze.
Rotary Polisher-
1. Apply a small amount to the surface.
2. Buff with a wool or foam pad at low rpm.
3. Slightly tilt up the pad and buff from side to side to remove scratches.
4. Wipe off residue and apply wax or glaze.
DA or Orbital Polisher-
1. Apply a small amount to the surface and polish until swirls are removed.
2. Wipe off residue and apply wax or glaze.
16oz, 1Gal
COMPOLISHUltra Fine Polishing Compound
• The enemy of swirls
• Safe for all paints
• Prepares surface for waxing or glazing
NANOSKIN COMPOLISH is an ultra fine polishing compound designed to remove
minor scratches, swirls, spider webs and light oxidation. By simply using
COMPOLISH with 2 pads – Wool polishing pad & Euro foam cutting pad, the paint
will be completely swirl and hologram free. It leaves low dust and produces a
brilliant high gloss finish. A perfect follow up to NANOSKIN FIRST CUT. The
combination of FIRST CUT and COMPOLISH should be all you need for most
paint corrections. It contains no silicone, no wax, and no fillers.
Directions:
Shake well. Use only on clean, cool paint and out of direct sunlight.
Hand-
1. Apply a small amount to a soft cloth and rub on the surface until the scratches
are removed.
2. Wipe off residue and apply wax or glaze.
Rotary Polisher-
1. Apply a small amount to the surface.
2. Buff with a wool or foam pad at low rpm.
3. Slightly tilt up the pad and buff from side to side to remove scratches.
4. Wipe off residue and apply wax or glaze.
DA or Orbital Polisher-
1. Apply a small amount to the surface and polish until swirls are removed.
2. Wipe off residue and apply wax or glaze.
16oz, 1Gal
HI GLAZEHigh-Endurance Glaze
• See the difference
• Feel the shine
• Perfect for all colors and all paints
NANOSKIN HI GLAZE is our top of the line high gloss paint glaze. It is a long
lasting and detergent resistant protectant. It's perfect for all colors and all paints.
On dark colors, the depth of the shine and wet gloss reflections will amaze you.
It's easy application and low dust removal make it a number one choice for
professional detailers. Works in the sun.
Directions:
Shake well before using.
Hand-
1. Apply a small amount to a dry wax applicator sponge.
2. Wipe on surface and let dry to a light haze.
Wipe off residue with a clean dry towel or clean dry micro fiber.
Machine-
1. Apply a small amount product to surface and buff with a foam polishing pad to
a brilliant shine.
2. Wipe off residue with a clean dry soft towel or clean dry micro fiber.
16oz, 1Gal
Paint Protection
Glass Protection
Wheel Protection
Leather, Vinyl, Rubber, Tire & Plastic Protection
Fabric & Carpet Protection
Cleaners, Degreasers, Shampoo, Scents, Maintenance
Polishes
Solvents
TAR SOLVENTTar & Grease Remover
• Removes tar and adhesive trim marks
• Safe to use on all paints and trim
• Small amount required to remove spots
When oil based, greasy, sticky stains happen, NANOSKIN TGR Tar and Grease
Remover is the answer. This special blend of solvents will remove most oily stains
with ease. In addition to gum, tar, and grease, this stain remover is excellent on
crayon, lipstick, shoe polish, wax, inks, adhesives, glues and many other oil based
stains.
Directions:
Test surface compatibility on an inconspicuous area before using.
1. Lightly moisten a clean cloth.
2. Lightly rub surface to remove undesirable coating.
3. Not recommended for freshly painted surfaces.
4. Do not use on plastic.
16oz, 1Gal