nano technology in mechanical engineering g.akhil
TRANSCRIPT
NANO TECHNOLOGY IN MECHANICAL ENGINEERING
BYG.AKHIL (13751A0321)
DEPARTMENT OF MECHANICAL ENGINEERINGSITAMS
INTODUCTION• 1.1 GREEN ENGINEERING:• Green Engineering is the design, commercialization and
use of processes and products that are feasible and economical while:
• Reducing the generation of pollution at the source. • Minimizing the risk to human health and the environment. • Green engineering embraces the concept that decisions to
protect human health and the environment can have the greatest impact and cost effectiveness when applied early to the design and development phase of a process or product.
PRINCIPLES • The principles of green engineering are as follows:• Engineer processes and products holistically, use system analysis and integrate
environmental impact assessment tools.• Conserve and improve natural ecosystems while protecting human health and
well being.• Use life cycle thinking in all engineering activities.• Ensure that all material and energy inputs and outputs areas inherently safe
and benign as possible.• Minimize depletion of natural resources.• Strive to prevent waste.• Develop and apply engineering solutions, while being cognizant of local
geography aspirations and cultures.• Create engineering solutions beyond current and dominant technologies;
improve, innovate and invent (technologies) to achieve sustainability.
NANO TECHNOLOGY • Nanotechnology is the engineering of functional systems at the
molecular scale. This covers current work and concepts that are more advanced. In its original sense, nanotechnology refers to the projected ability to construct items from the bottom up, using techniques and tools being developed today to make complete, highly advanced products. Nanotechnology is often referred to as a general-purpose technology. That’s because in its mature form it will have significant impact on almost all industries and all areas of society. It offers better built, longer lasting, cleaner, safer, and smarter products for the home, for communications, for medicine, for transportation, for agriculture, and for industry in general. Like electricity or computers before it, nanotech will offer greatly improved efficiency in almost every facet of life.
ROLE OF MECH IN NANO TECH• Mechanical engineering issues extend to instruments for nano
particle and aerosol detection and characterization, as well as to various forms of nano scale imaging. Magnetic data storage technology already has many features that fall well into the nano meter size range, and requires mechanical engineering knowledge and expertise to further its development.
It is important to recognize some unique features about nanotechnology. First, it is the amalgamation of knowledge from chemistry, physics, biology, materials science, and various engineering fields. It epitomizes the concept of the whole being greater than the sum of the parts.
NANO PARTICLES IN THERMAL • In spite of advances in efficiency of vehicle power train systems and
electronics, the removal of waste heat continues to be an important challenge. With increasing focus on reduced component size and mass, the traditional approach of increasing the area available for heat exchange with a cooling fluid (air, water/ethylene glycol) to manage higher heat loads is not acceptable. Increasing thermal power densities requires innovations in new coolants and thermal coupling materials .The concept of using nano-fluids as a means of improving coolant performance was proposed over a decade ago [2].Reports of up to 100% increase in liquid thermal conductivity with the addition of nano meter scale particles motivated a large amount of scientific/technical inquiry in the ensuing years [3].
FUEL AND NANO TECHNOLOGY
• Nanotechnology can address the shortage of fossil fuels such as diesel and gasoline by:
• Making the production of fuels from low grade raw materials economical
• Increasing the mileage of engines• Making the production of fuels from normal
raw materials more efficient
FUEL CELLS & NANO TECH• Catalysts are used with fuels such as hydrogen or methanol to
produce hydrogen ions. Platinum, which is very expensive, is the catalyst typically used in this process. Companies are using nano particles of platinum to reduce the amount of platinum needed, or using nanop articles of other materials to replace platinum entirely and thereby lower costs.
• Fuel cells contain membranes that allow hydrogen ions to pass through the cell but do not allow other atoms or ions, such as oxygen, to pass through. Companies are using nanotechnology to create more efficient membranes; this will allow them to build lighter weight and longer lasting fuel cells.
IMAGES OF AUTOMOBILES USING NANO TECHNOLOGY
CONCLUSION• The automotive industry will be influenced by the development
and implementation of nanotechnology. It is our hope to raise the awareness that nanotechnology will positively influence the business of the automotive industry
• over the next several years Due to the small size of nano-materials, their physical/chemical properties (e.g. stability, hardness, conductivity ,reactivity, optical sensitivity, melting point, etc.) can be manipulated to improve the overall properties of conventional material .Metal nano particles are being considered for potential use in catalytic converters since the catalytic reactivity is significantly enhanced due to the increased surface area of the metal
THANK YOU