name of work : construction of (i) extension of...

NIT NO-ERO/MMD/PC/0957 Dated 16.08.2012

Sl.No. PARTICULARS

1 Administrative Building Extension at MZU 41868814,81

2 Health Centre 19082124,68

Total 60950939,49

Name of Work : Construction of (i) Extension of Administrative Building & (ii) Health Centre at MZU Campus, Tanhril, Aizawl

AMOUNT (`)

of 121

CONSTRUCTION OF HEALTH CENTRE AT MIZORAM UNIVERSITY, TANHRIL CAMPUS

SL.No. Item Description Unit Qnty.

CIVIL WORK

SUB HEAD -1 EARTHWORK IN EXCAVATION

1,01 DSR- 2.6

2.6.1

Ordinary and Hard soil

cum 713,92 212,87

1,02 DSR- 2.7

2.7.1

Ordinary Rock

cum 506,92 318,94

1,03 DSR- 2.25

cum 537,58 95,52

SUB TOTAL NO. 1

SOR-2007 /DSR-

2007/NSRate (`)

Earth work in excavation by mechanical means (Hydraulic excavator / manual means over areas (exceeding 30 cm in depth 1.5 m in width as well as 10 Sqm. on plan) including disposal of excavated earth lead up to 50 m and lift upto 1.5 disposed earth to be levelled and neatly dressed.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m

of 121


SL.No. Item Description Unit Qnty.SOR-

2007 /DSR-2007/NS

Rate (`)

SUB HEAD -2 PLAIN CEMENT CONCRETE WORKS

2,01 DSR- 4.1

4.1.2

cum 62,55 7586,29

2,02 DSR- 4.1.5

cum 43,19 5833,30

SUB TOTAL NO. 2

SUB HEAD -3 R.C.C WORKS

3,01 DSR- 5.3

cum 1,53 7678,35

DSR- 5.1

5.1.2cum

46,87 7799,88

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level

1:1 1/2 :3 (1 Cement: 11/2 Coarse Sand: 3 Graded Stone Agrregate 20 mm Nominal Size)Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size )

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircase and spiral staircases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size)

Providing and laying in possition specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level1:1.5:3 (1 Cement:1.5 Coarse Sand: 3 Graded Stone Agrregate 20 mm nominal size)

of 121



2007 /DSR-2007/NS

Rate (`)

3,02 DSR- 5.2

a 5.2.2

cum 269,93 8553,02

3,3 DSR-5.22

5.22.6 TheRmo - Mechanically Treated bars.

Kg 50585,68 89,25

3,4 DSR-5.9

a 5.9.1 Foundations, footings, bases of columns, etc., for mass concrete.

Sqm

92,28 249,24

b 5.9.3 Suspended floors, roofs, landings, balconies and access platfoRm

Sqm

609,64 391,57

c 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Sqm

843,80 339,73

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, filets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement:

1:1.5:3 (1 Cement:1.5 Coarse Sand: 3 Graded Stone Agrregate 20 mm nominal size)

Reinforcement for R.C.C. work including straightening, cutting bending, placing in position and binding all complete

Centering and shuttering including strutting, propping etc. and removal of foRm for :

of 121



2007 /DSR-2007/NS

Rate (`)

d 5.9.6 Columns, Pillars, Piers, Abutments, Post and struts

Sqm

587,44 498,26

e 5.9.7 Stairs (excluding landings} except spiral staircases. Sqm 25,38 426,36f 5.9.13

Sqm 124,87 596,80

3,5 SOR-5.1

Sqm 936,70 33,41

SUB TOTAL NO. 3

Vertical and horizontal fins individually or foRming box louvers band, facias and eaves boards

Applying cement slurry on RCC slabs or on cement concrete work using 2.75 kg/Sqm for receiving cement concrete floor including roughening, clearing etc. complete.

of 121



2007 /DSR-2007/NS

Rate (`)

SUB HEAD -4 BRICK WORK

4,01 NS

b) in cement mortar 1: 4 ( 1 cement : 4 fine sand )cum 10,36 7990,00

4,02 NS

a) in cement moratar 1:3 ( 1 cement : 3 fine sand )Sqm 1083,79 924,72

4,03 DSR-6.15

Sqm 1083,79 99,91

SUB TOTAL NO. 4

SUB HEAD -5 STONE WORK

5,01 SOR-7.03

B) Coursed Rubble masonry (2nd sort)a) in cement mortar 1 : 3 ( 1cement : 3 fine sand) cum 326,83 4770,24

SUB TOTAL NO. 5

First class brickwork in foundation upto one storey above and below ground level including curing, etc. complete.

Half brick masonry with first class brick in foundation upto one storey above and below ground level including curing, etc. complete.

Extra for providing and placing in position 2 nos 6mm dia. MS bars at every third course of half brick masonry.

Coursed rubble masonry with hard stone in foundation upto one storey above and below ground level including curing, etc. complete.

of 121



2007 /DSR-2007/NS

Rate (`)

SUB HEAD -6 WOOD WORK & PVC WORK

6,01 DSR-9.1

9.1.1 Second class teak wood

cum 2,45 108868,10

6,02 DSR-9.7

a)


Sqm 9,72 2248,01

6,03 SOR-9.55

Rm 127,40 190,99

6,04 SOR-9.56

A) 1st class teak wood

Providing Wood Work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in possition

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :

Providing and fixing wooden pelmet with 25mm dia wooden curtain rod and bracket including fixing wooden plugs etc. complete ( to be fixed on masonry or concrete work )

Providing and fixing wooden pelmet with 25mm dia wooden curtain rod and bracket etc. complete ( to be fixed on wood work )

of 121



2007 /DSR-2007/NS

Rate (`)

b) 12mm thick 150mm wide

Rm 23,70 180,52

SUB TOTAL NO. 6

of 121



2007 /DSR-2007/NS

Rate (`)

SUB HEAD -7 STEEL WORK

7,01 SOR-10.07

Sqm 92,04 1458,52

7,02 SOR-10.12

Kg 4562,00 90,77

SUB TOTAL NO. 7

SUB HEAD -8 ALUMINIUM WORK

8,01 SOR-11.01

Providing and fixing M.S. Grills with 16mm flats M.S. of desired sections, fixed and welded in position in the pre-fabricated steel framed windows etc. including applying priming coat etc. complete.

Structural steel work welded in built up sections, trusses and framed works, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (in tees, R.S. joists, angles, flats and channels.)

Providing and fixing anodised aluminium work for windows and ventilators with extruded built up standard sections of approved make confoRming to IS : 733 and IS : 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/ neoprene gaskets etc.Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whenever required including cleat angle, aluminium snap beading for glazing /panelling, CP brass /stainless steel screws all complete including fixing of glasses but excluding cost of glasses.

of 121



2007 /DSR-2007/NS

Rate (`)

a) 2 - track sliding windows/ventilators.

Sqm 95,19 6016,09

8,02 SOR-11.02 Supplying of glass panes at site.

c) 4mm thick plate sheet glass. Sqm 93,95

648,21

e) 4mm thick frosted glass. Sqm 4,04

868,18

(Profile of size 60x30x1.5mm should be used as frames. Profile of size 40x20x1.5mm should be used as shutters.Profile of size 40x30x1.5 should be used as interlocking hook for sliding shutters. Movement of shutters should be on projected rails.)

of 121



2007 /DSR-2007/NS

Rate (`)

8,03 DSR-21.1

21.1.1 For Fixed Portion21.1.1.1

Kg 31,00 607,05

21.1.2

Kg 61,81 648,85

8,04 SOR-11.04

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other secrions of approved make confoRming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasterners including necessary filling up of graps at junctions, at top, bottom and sides with required PVC/ neoprene felt etc. Aluminium section shall be smooth, rust free, stright, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap breading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately)

Anodised aluminium (anodised transparent or dyed to required shade according to IS 1868, minimum anodic coating of grade AC-15

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately) .

Providing and fixing 12mm thick prelaminated three layer medium density (exterior grade) particle board Grade I, Type II confoRming to IS : 12823 bonded with phenol foRmaldehyde synthetic resin, of approved brand and manufacture in paneling fixed in aluminium doors, windows shutters and partition frames with C.P. brass/ stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.

of 121



2007 /DSR-2007/NS

Rate (`)

Prelaminated particle board with decorative lamination on both sides .

Sqm 2,80 837,17

SUB TOTAL NO.8

SUB HEAD -9 FLOORING

9,01 SOR-12.01

Sqm 6,66 246,96

9,02 SOR-12.31

Sqm 643,17 2612,60

Cement concrete flooring 25mm thick with cement concrete 1:2:4 (1 cement : 2 sand : 4 well graded stone aggregate 12.5mm size) finished with a floating coat neat cement including cement slurry etc. complete but excluding the cost of nosing of steps etc.

Providing & laying Marbonite tiles 10.5mm thick of any shade laid on bed of 20mm thick cement mortar 1 : 4 in floors, treads of steps and landings jointed with neat cement slurry including finishing joints with grouting in white cement mixed with pigment of matching shade complete./including cutting where necessary finishing with flush pointing with Fix-A-tile (Choksey/ Sika/ Pedelite/ Rout)/ Bal Endura with Bal Endura grout complete.

of 121



2007 /DSR-2007/NS

Rate (`)

9,03 SOR-12.32

Sqm 90,93 2360,86

9,04 SOR-12.29

b) Coloured/Coloured decorated

iii) Glazed tiles 24x30cm size (Toilet)

Sqm 37,39 2381,28

9,05 SOR-12.3


Marbonite tiles of thickness not less than 8mm thick of any shade in wall, skirting and risers of steps not exceeding 30cm in height, on 12mm thick cement plaster 1 : 3, including cutting where necessary finishing with flush pointing with Fix-A-tile (Choksey/ Sika/ Pedelite/ Rout) / Bal Endura with Bal endura grout complete.

Glazed tiles of minimum thickness 5mm in flooring, treads of steps and landings laid on a bed of 10mm thick cement mortar 1 : 3 finished with flushed pointing in white cement.

White glazed tiles of minimum thickness 5mm in skirtings, risers of steps and dado laid on a bed of 12mm thick cement plaster 1 : 3 finished with flushed pointing in white cement.

of 121



2007 /DSR-2007/NS

Rate (`)


Sqm 149,79 2441,41

9,06 SOR-12.43

c) Rajnagar white (white shinning spots)

Sqm 29,96 3302,65

9,07 SOR-12.44

White/coloured marble stone slab of size not less than 1200mm x 600mm x 20mm thick and above in flooring, treads of steps and landings laid over 20mm (average) thick base of cement mortar 1:4 and jointed with white cement slurry including rubbing and polishing complete.

White/coloured marble stone 20mm thick in skirting, riser of steps, dado, walls and pillars laid on 12mm (average) thick base of cement mortar 1:3 and jointed with white cement slurry including rubbing and polishing complete.

of 121



2007 /DSR-2007/NS

Rate (`)


Sqm 11,91 3641,37

SUB TOTAL NO.9

SUB HEAD -10 DOOR & WINDOW FITTINGS

10,01 SOR-14.28

a) 300 x 16 mm

Nos. 20,00 983,02

10,02 SOR-14.29

Providing and fixing brass sliding door bolts (aldrops) bright finished with nuts and screws etc. complete.

Providing and fixing Brass Tower Bolts ( Socket Bolts) bright finished with necessary screws etc. complete.

of 121



2007 /DSR-2007/NS

Rate (`)

c) 200 mm

Nos. 60,00 167,79

10,03 SOR-14.32 Providing and fixing brass handles with necessary screws, etc. completea) 150 mm

Nos. 78,00 232,84

10,04 SOR-14.36

Nos. 27,00 149,89

10,05 SOR-14.38

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

Providing and fixing bright finished Brass Door Closer with necessary screws, etc. complete.

of 121



2007 /DSR-2007/NS

Rate (`)

a) Hydraulic Type

Nos. 4,00 672,79

10,06 SOR-14.66

b) 150 mm

Nos. 21,00 167,79

10,07 SOR-14.67 Providing and fixing brass handles with necessary screws, etc. complete

a) 100mm

Nos. 21,00 121,53

10,08 SOR-14.68 Providing and fixing brass hooks and eyes.

Providing and fixing brass tower bolts (socket bolts) bright finished with necessary screws etc. complete.

of 121



2007 /DSR-2007/NS

Rate (`)

b) 150mm

Nos. 21,00 121,53

SUB TOTAL NO.10

SUB HEAD -11 PLASTERING

11,01 SOR-21.12

Sqm 1341,94 214,05

Internal walls

11,02 SOR-21.16

Sqm 863,29 266,50

External walls

15mm cement plaster 1 : 3 (1 cement : 3 fine sand).


of 121



2007 /DSR-2007/NS

Rate (`)

11,03 SOR-21.26

Sqm 440,57 127,96

SUB TOTAL NO.11

6mm cement plaster to ceiling 1 : 3 (1 cement : 3 fine sand)

of 121



2007 /DSR-2007/NS

Rate (`)

SUB HEAD -12 CEILING

12,01 SOR-15.21

Sqm 177,20 2066,13

SUB TOTAL NO.12SUB HEAD -13 ROOFING

13,01 DSR-12.41

Rm 48,00 198,55

12.41.1 a) 75 mm diameter

13,02 DSR-12.42

12.42.5 Bend 87.5° 12.42.5.1

75 mm bend Nos. 18,00

184,76

12.42.6 Shoe (Plain)

Providing and fixing recessed ceiling with 12.5mm tapered Gyp board which includes providing and fixing G.I perimeter funnels with nylon sleeves and screws inteRmediate channels fixed to GI seat and steel expansion fastener etc. all complete including rounding, filling and finishing the tapered and square of the board with jointing compound and two coats of primer suitable to Gypboard.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes confoRming to IS : 13592 Type A including jointing with seal ring confoRming to IS : 5382 leaving 10 mm gap for theRmal expansion.(i) Single socketed pipes :

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes confoRming to IS : 13592 Type A including jointing with seal ring confoRming to IS : 5382 leaving 10 mm gap for theRmal expansion.

of 121



2007 /DSR-2007/NS

Rate (`)

12.42.6.1

a) 75 mm bend Nos. 6,00

318,21

13,03 DSR-12.43

12.43.1

a) 75 mm Nos. 24,00

166,16

13,04 DSR-12.44

Nos. 6,00 48,91

13,05 SOR-16.37

i) For 0.50mm thick :

Sqm 316,55 971,30

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.

Providing Trapezoidal Polyester Coated Galvanised Steel Sheets Roofing of any colour manufactured by DYNA ROOF of 1.06m width at all levels including fitting and fixing ridging with self drilling , self tapping screws, EPDM washers etc. complete excluding the cost of purlin, rafter and trusses.

of 121



2007 /DSR-2007/NS

Rate (`)

13,06 SOR-16.38

Rm 65,01 468,32

SUB TOTAL NO.13

Providing and fixing of Polyester Coated Galvanised Steel Sheets of any colour manufactured by DYNA ROOF ridges, gutters or valleys 50cm overall width 0.50mm thick with 150 mm overlapping fixed with Self Drilling & Tapping Screws with EPDM washer but excluding the cost of base frame.

of 121



2007 /DSR-2007/NS

Rate (`)

SUB HEAD -14 PAINTING

14,01 SOR-21.65

Sqm 2618,20 33,28

Quantity vide item no. 15.1/21.12Quantity vide item no. 15.2/21.16Quantity vide item no. 15.3/21.26

14,02 SOR-21.66

a) Ready mix white primer.

Sqm 116,76 33,28

14,03 SOR-21.93

Applying one coat of cement primer of approved brand and manufacture on wall surface.

Applying priming coat with ready mixed primer of approved brand and manufacture on wood work and plywood complete.

Painting with synthetic enamel paint of approved brand and manufacture in all shades on new work (two or more coats).

of 121



2007 /DSR-2007/NS

Rate (`)

b) High gloss

Sqm 208,80 75,51

14,04 SOR-21.95

b) Premium interior emulsion like Velvet touch Luxol silk etc.

Sqm 1754,91 119,51

Quantity vide item no. 15.1/21.12Quantity vide item no. 15.3/21.26

14,05 SOR-21.98

b) Premium exterior emulsion like weathercote, weather shield etc.

Sqm 863,29 277,59

Quantity vide item no. 15.2/21.16SUB TOTAL NO.14

Wall painting with interior emulsion paint of approved brand and manufacture on new work (two or more coats) to give an even shade.

Finishing walls with regular exterior emulsion of required shade on new work (three or more coats) to give an even shade.

of 121



2007 /DSR-2007/NS

Rate (`)

of 121



2007 /DSR-2007/NS

Rate (`)

SANITARY & PLUMBING WORKSUB HEAD -15 SANITARY INSTALLATION

15,01 SOR-17.145

b) 75mm dia.

Rm 4,00 185,31

15,02 SOR-17.154

Nos. 2,00 54,34

15,03 SOR-17.06

Providing and fixing on wall face SWRPVC soil, waste and vent pipes including jointing with rubber lubricant/cement solvent complete.

Providing and fixing ventilation cowl including jointing with rubber lubricant/cement solvent complete.

Providing and fixing vitreous china water closet (Floor Mounted EWC Standard 'S'/SVT) of Parryware/Hindware/Cera and equivalent make including seat and lid with C.P brass hinges and rubber buffers, 10 litres low level vitreous china flushing cistern with fittings and C.I / R.S brackets, 40 mm porcelain enamelled flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required.

of 121



2007 /DSR-2007/NS

Rate (`)

ii) Pastel

Nos. 11,00 6053,28

15,04 SOR-17.43

ii) Pastel

(a) One urinal basin with flush valve/spray

Nos. 3,00 8472,50

15,05 SOR-17.73

i) White

Providing and fixing vitreous china Urinal Flat Back Large 59 x 37.5 x 39cm of Parryware/ Hindware/ Cera and equivalent make with flush valve/spray with C.I or R.S brackets standard size of G.I flush pipe and C.P brass spreaders with brass unions and G.I clamps complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required.

Providing and fixing White vitreous china wash basin Standard of Parryware/ Hindware/ Cera and equivalent make with R.S. or C.I. brackets, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plugs, 32mm C.P. brass waste of standard pattern, 32mm C.P. brass traps and union complete including painting of fittings and brackets, cutting and making good the walls wherever required.

of 121



2007 /DSR-2007/NS

Rate (`)

Nos. 12,00 3520,99

15,06 SOR-17.9

i) White

Nos 12,00 1216,36

15,07 SOR-17.108

(a) Standard wash basin size 630x450mm with a single 15mm C.P. brass pillar tap.

Providing and fixing vitreous china tall pedestal of Parryware/ Hindware/ Cera and equivalent make for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing Stainless steel kitchen Single Sink with drain board of Hindware/Nirali and equivalent make with R.S. or C.I. brackets, C.P. brass chain with rubber plug, 40mm C.P. brass waste and 40mm C.P brass trap with unions complete, including painting the fittings and brackets, cutting and making good the walls wherever required.

a) Single Sink with Drain Board 815x460mm (32x18 inch) with bowl size 355x410x180 mm (14x16x7 inch)

of 121



2007 /DSR-2007/NS

Rate (`)

(iii) Anti-scratch

Nos. 2,00 10399,32

15,08 SOR-17.114

b) Marble sink counter.

Sqm 1,41 3597,51

15,09 SOR-17.119

Nos. 12,00 983,78

15,10 SOR-17.123

Providing and fixing sink counter including cutting to required size on the prepared flat portion of RCC slab.

Providing anf fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos sheet ground fixed to wooden cleats with C.P. brass screws and washers.

Providing and fixing C.P. brass towel rail with two C.P. brass brackets to wooden cleats with C.P. brass screws.

of 121



2007 /DSR-2007/NS

Rate (`)

b) 600x20mm size.

Nos. 14,00 1126,35

15,11 SOR-17.125 Providing anf fixing toilet paper holder.

c) Plastic toilet paper holder of standard size.

Nos. 11,00 401,63

15,12 SOR-17.144

Nos. 10,00 72,99

15,13 SOR-17.145

Providing and fixing floor trap including cutting floor and making good the floor complete.


of 121



2007 /DSR-2007/NS

Rate (`)

a) 110mm dia. Rm 80

319,82

b) 75mm dia. Rm 60

185,31

15,14 SOR-17.146

a) 110mm dia. Nos. 20

155,18

Providing and fixing SWRPVC plain bend of required degree ( 87.50° ) including jointing with rubber lubricant/cement solvent complete.

of 121



2007 /DSR-2007/NS

Rate (`)

b) 75mm dia. Nos. 20

93,04

15,15 SOR-17.149

a) 110x110x110mm Nos. 8

194,01

b) 75x75x75mm Nos. 10

116,36

15,16 SOR-17.152

Providing and fixing single equal SWRPVC plain junction of required degree ( T-junction )

Providing and fixing SWRPVC plain junction of required degree (Y-junction) including jointing with rubber lubricant/cement solvent.

of 121



2007 /DSR-2007/NS

Rate (`)

a) 110 mm Y-junction. Nos. 2

263,72

b) 75 mm Y-junction. Nos. 2

147,37

15,17 SOR-17.154

a) 110mm SWRPVC vent cowl Nos. 2

77,53

15,18 SOR-19.18 Supplying and fixing C.I. cover without frame for manholes :Nos. 4,00 1064,46


b) 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg.

of 121



2007 /DSR-2007/NS

Rate (`)

15,19 SOR-19.35

Nos. 2,00 2198,24

SUB TOTAL NO.15

Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.

of 121



2007 /DSR-2007/NS

Rate (`)

SUB HEAD -16 WATER SUPPLY

16,01 SOR-18.02

Litres 15000,00 11,85

16,02 SOR-18.03

(a) 20mm dia nominal bore

Rm 60,00 192,88

16,03 SOR-18.04

Rm 60,00 128,08

16,04 DSR-18.12

Providing and fixing on terrace (at all floor levels) Polyethylene storage tank of approved brand and manufacture with cover and mosquito proof coupling and suitable locking arrangement and making nescessary connections for inlet, outlet and overflow pipes but without the cost for base support.

Providing and fixing G.I. pipes complete with G.I. fitting and clamps, including cutting and making good the walls etc. (internal works).

Extra for concealed in brick and RCC works by making chases upto 7.5x7.5cm in walls and making good the same after housing pipes, etc.

Providing and fixing G.I. Pipe complete with G.I fittings including trenching and refilling etc. External Work:

of 121



2007 /DSR-2007/NS

Rate (`)

18.12.2 a) 20mm nominal bore

Rm 60,00 243,70

16,05 DSR-18.49 Providing and fixing C.P bib cock of approved quality confoRming to IS:8931.


Nos. 11,00 654,38

16,06 SOR-18.19 Providing and fixing chromium plated brass stop cock of approved quality.a) 20mm nominal bore

Nos. 3,00 702,54

SUB TOTAL NO.16

of 121



2007 /DSR-2007/NS

Rate (`)

SUB HEAD -17 FIRE FIGHTING

17,01 SOR-29.22 Providing and fixing portable fire extinguisher a) Fire Extinguisher Water - CO2 type, capacity - 9 litres Nos. 20,00 6207,45

SUB TOTAL NO.17

SUB HEAD -18 MISCELLEOUS BUILDING WORK

18,1 SOR-26.11

Sqm 37,80 2282,83

Providing and fixing factory made medium density particle board door shutters flat pressed three-layer prelaminated particle board exterior grade, confoRming to IS : 3087 grade-I and prelamination confoRming to IS : 12823 Grade - I Type II both side decorative matt lamination of approved design, and edges sealed with water resistant paint and lipped with aluminium 'U' type edge beading alround the shutter, including fixing with angle cleat, grip strip, cadmium plated steel screws including fixing of aluminium hinges 100x63x4 mm etc. complete as per architectural drawing and direction of Engineer-in-Charge (cost of 'U' beading and hinges will be paid for separately) :

of 121



2007 /DSR-2007/NS

Rate (`)

18,2 DSR-9.12

Sqm 19,50 4409,80

SUB TOTAL NO.18

Providing and fixing 30mm thick factory made PVC rigid foam panelled door shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for styles and 15x15mm for top and bottom rails, covered with heat moulded PVC "C" channel of 5mm thick sheet and 30x50mm wide to foRm styles and 5mm thick and 75mm wide PVC sheets for top rail, lock rail and bottom rail on either side and 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom rail, panelling of 5mm thick PVC sheet fitted in the M.S. frame welded/sealed to the styles and rails with 5x30mm PVC sheet beading on either side and joined together with solvent cement adhesive etc., complete as per manufacturers specification and direction of Engineer-in-Charge fixed to frames with 4 Nos. M.S. powder coated butt hinges (For W.C. and bathroom shutters).

of 121



2007 /DSR-2007/NS

Rate (`)

SUB HEAD -19 ELECTRICAL WORKS

19,01

19.01.1 20mm Metre 80019.01.2 25mm Metre 40019.01.3 32mm Metre 260

19,02

19.02.1 2 X 1.5 sq. mm Metre 70019.02.2 2 X 2.5 sq. mm Metre 40019.02.3 2 X 4 sq. mm Metre 12019.02.4 2 X 6 sq. mm Metre 21019.02.5 4 X 6 sq. mm Metre 18

19,03

19.03.1 2 Pair Metre 360

19,04

19.04.1 1 or 2 module (75mm X 75mm) Each 1819.04.2 4 module (125mm X 75mm) Each 6519.04.3 6 module (200mm X 75mm) Each 419.04.4 8 module (125mm X 125mm) Each 1

S/F PVC Conduit: Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess including painting in case of surface conduit , or cutting the wall and making good the same in case of recessed conduit as required

Wiring in Existing Conduit: Supplying and drawing following sizes of FR PVC insulated Copper Conductor, Single Core Cable in the Existing Surface / Recessed Steel / PVC Conduit as required.

Telephone wiring in Existing Conduit: Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated Copper Conductor , unaRmoured telephone Cable in the existing surface/ recessed steel/ PVC Conduit as required.

S/F modular boxes, base & cover plate: Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.

of 121



2007 /DSR-2007/NS

Rate (`)

19.04.5 12 module (200mm X 150mm) Each 13

19,05

19.05.1 5/6 amps Switch Each 15819.05.2 2 Way 5/6 amps switch Each 019.05.3 15/16 amp switch Each 819.05.4 3 pin 5/6 amp socket outlet Each 3419.05.5 6 pin 15/16 amp socket outlet Each 2319.05.6 Telephone socket outlet Each 2419.05.7 TV Antenna socket outlet Each 0

19,06

Each 7

19,07

Each 26

19,08Each 4

19,09

19.09.1 8 way (4+18) double way horizontal type Each 2

S/F modular type switch/ socket: Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.

ITC exhaust Fan Upto 300mm Sweep: Installation of exhaust fan upto 300mm sweep in the existing openings, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning etc. as required.

S/F modular type electronic fan regulator: Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

S/F Call bell/ buzzer: Supplying and fixing call bell/ buzzer suitable for D.C /A.C. single phase, 230 volts, complete as required.

S/F TP MCB DB: Supplying and fixing following way, three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, phosphatized and powder painted including earthing etc, as required.(But without MCB/RCCB/Isolator)

of 121



2007 /DSR-2007/NS

Rate (`)

19.09.2 4 way (4+18) double way horizontal type Each 1

19,10

19.10.1 single pole Each 40

19,11

Set 2

19,12

Metre 100

19,13

19.13.1 4 way with 100 amps MCCB as incomer Each 1

19,14

19.14.1 40A Each 1

S/F'C' series,SP MCB: Supplying and fixing 5 amps to 32 amps rating,240 volts,'C' series,miniture circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissioning etc. as required.

G.I. earth plate electrode: Earthing with G.I. earth plate 600mm X 600mm X 6mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc.

S/ L 6 SWG GI wire in ground: Supplying and laying 6 SWG G.I wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc. as required.

S/F vertical typr TP MCB DB: Supplying,installation,testing and commissioning of surface/recess mounting,vertical type,415 volts,TPN MCB distribution board of sheet steel,dust protected,duly phosphatizes and powder painetd,inclusive of 200 amps tinned copper busbar,common neutral link,earth bar,din bar for mounting MCB's detchable gland/knock out plate, and with 100 amps,10 KA MCCB as incomer interconnection between incomer MCCB and busbars of following ways(but without MCB's) as required. (Note: Vertical type MCB TPDB is noRmally used where 3 phase outlets are required.)

Supplying with fitting and fixing TPN 10 KA 415 V 50 Hz MCB of the following capacity complete with necessary connection as specified and directed by the deptt.

of 121



2007 /DSR-2007/NS

Rate (`)

19.14.2 63A Each 2

19,15

19.15.1Per Metre 30

19,16

(C) Medium point Each 153SUB TOTAL NO.19NOTE: 19.01 to 19.13 As Per CPWD Schedule,2007Item No. 19.14,19.15 As Per APWD Schedule,2010-2011Item No.19.16 As Per Mizoram PWD Schedule,2007

TOTAL (SL. NO. 1 TO SL. NO. 19)

Wiring for sub-main line with P.V.C. insulated unsheathed I.S.I. marked single core copper conductor cable in surface rigid PVC. Casing caping conduit wiring system including earth continuity cable with PVC. Insulated unsheathed copper single core conductor,painting etc.as required.4 x 10.00 Sq.mm + 1 x 2.5 Sq.mm with 38mm dia, 2.5mm thick rigid PVC Pipe

A:01:01 : LIGHT POINT,CEILING FAN POINT, ETC (modular type) Wiring in looping system with PVC wire 1.5 Sqmm standard copper wire/ conductor as per IS:694 (1990) and FIA & TAC , approved, ISO-9001 certified company make, the conductors/wires PVC insulation strength of standard 650/1100 volts graded, stranded copper cable running inside UPVC conduit pipe (heavy duty) 20mm diameter fixed, recessed inside the wall/ceiling/floor as per convenience including joint box having required numbers ways from control switch to light point etc.,(with PVC/Steel Box and phenolic laminated sheet cover) in completed.

of 121


SL.No. Item Description Unit Qnty.

CIVIL WORK

SUB HEAD -1 EARTHWORK IN EXCAVATION

1,01 DSR- 2.6

2.6.1

Ordinary and Hard soil

cum 713,92 212,87 151972,15

1,02 DSR- 2.7

2.7.1

Ordinary Rock

cum 506,92 318,94 161677,06

1,03 DSR- 2.25

cum 537,58 95,52 51349,64

SUB TOTAL NO. 1 364998,86

SOR-2007 /DSR-

2007/NSRate (`) Amount (`)




of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)

SUB HEAD -2 PLAIN CEMENT CONCRETE WORKS

2,01 DSR- 4.1

4.1.2

cum 62,55 7586,29 474522,44

2,02 DSR- 4.1.5

cum 43,19 5833,30 251940,23



3,01 DSR- 5.3

cum 1,53 7678,35 11747,88

DSR- 5.1

5.1.2cum

46,87 7799,88 365580,38

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level

1:1 1/2 :3 (1 Cement: 11/2 Coarse Sand: 3 Graded Stone Agrregate 20 mm Nominal Size)Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size )

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircase and spiral staircases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size)

Providing and laying in possition specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level1:1.5:3 (1 Cement:1.5 Coarse Sand: 3 Graded Stone Agrregate 20 mm nominal size)

of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)

3,02 DSR- 5.2

a 5.2.2

cum 269,93 8553,02 2308716,69

3,3 DSR-5.22

5.22.6 TheRmo - Mechanically Treated bars.

Kg 50585,68 89,25 4514771,94

3,4 DSR-5.9

a 5.9.1 Foundations, footings, bases of columns, etc., for mass concrete.

Sqm

92,28 249,24 22999,87

b 5.9.3 Suspended floors, roofs, landings, balconies and access platfoRm

Sqm

609,64 391,57 238716,73

c 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Sqm

843,80 339,73 286664,17

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, filets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement:

1:1.5:3 (1 Cement:1.5 Coarse Sand: 3 Graded Stone Agrregate 20 mm nominal size)



of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)

d 5.9.6 Columns, Pillars, Piers, Abutments, Post and struts

Sqm

587,44 498,26 292697,85

e 5.9.7 Stairs (excluding landings} except spiral staircases. Sqm 25,38 426,36 10821,02f 5.9.13

Sqm 124,87 596,80 74522,42

3,5 SOR-5.1

Sqm 936,70 33,41 31295,15

SUB TOTAL NO. 3 8158534,09


Applying cement slurry on RCC slabs or on cement concrete work using 2.75 kg/Sqm for receiving cement concrete floor including roughening, clearing etc. complete.

of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)

SUB HEAD -4 BRICK WORK

4,01 NS

b) in cement mortar 1: 4 ( 1 cement : 4 fine sand )cum 10,36 7990,00 82776,40

4,02 NS

a) in cement moratar 1:3 ( 1 cement : 3 fine sand )Sqm 1083,79 924,72 1002202,29

4,03 DSR-6.15

Sqm 1083,79 99,91 108281,46

SUB TOTAL NO. 4 1193260,15

SUB HEAD -5 STONE WORK

5,01 SOR-7.03

B) Coursed Rubble masonry (2nd sort)a) in cement mortar 1 : 3 ( 1cement : 3 fine sand) cum 326,83 4770,24 1559057,54

SUB TOTAL NO. 5 1559057,54



Extra for providing and placing in position 2 nos 6mm dia. MS bars at every third course of half brick masonry.

Coursed rubble masonry with hard stone in foundation upto one storey above and below ground level including curing, etc. complete.

of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)

SUB HEAD -6 WOOD WORK & PVC WORK

6,01 DSR-9.1


cum 2,45 108868,10 266726,85

6,02 DSR-9.7

a)


Sqm 9,72 2248,01 21850,66

6,03 SOR-9.55

Rm 127,40 190,99 24332,13

6,04 SOR-9.56

A) 1st class teak wood



Providing and fixing wooden pelmet with 25mm dia wooden curtain rod and bracket including fixing wooden plugs etc. complete ( to be fixed on masonry or concrete work )

Providing and fixing wooden pelmet with 25mm dia wooden curtain rod and bracket etc. complete ( to be fixed on wood work )

of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)

b) 12mm thick 150mm wide

Rm 23,70 180,52 4278,33


of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)

SUB HEAD -7 STEEL WORK

7,01 SOR-10.07

Sqm 92,04 1458,52 134242,19

7,02 SOR-10.12

Kg 4562,00 90,77 414092,74


SUB HEAD -8 ALUMINIUM WORK

8,01 SOR-11.01

Providing and fixing M.S. Grills with 16mm flats M.S. of desired sections, fixed and welded in position in the pre-fabricated steel framed windows etc. including applying priming coat etc. complete.

Structural steel work welded in built up sections, trusses and framed works, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (in tees, R.S. joists, angles, flats and channels.)

Providing and fixing anodised aluminium work for windows and ventilators with extruded built up standard sections of approved make confoRming to IS : 733 and IS : 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/ neoprene gaskets etc.Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whenever required including cleat angle, aluminium snap beading for glazing /panelling, CP brass /stainless steel screws all complete including fixing of glasses but excluding cost of glasses.

of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)


Sqm 95,19 6016,09 572671,61

8,02 SOR-11.02 Supplying of glass panes at site.

c) 4mm thick plate sheet glass. Sqm 93,95

648,21 60899,33

e) 4mm thick frosted glass. Sqm 4,04

868,18 3507,45


of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)

8,03 DSR-21.1

21.1.1 For Fixed Portion21.1.1.1

Kg 31,00 607,05 18818,55

21.1.2

Kg 61,81 648,85 40105,42

8,04 SOR-11.04

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other secrions of approved make confoRming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasterners including necessary filling up of graps at junctions, at top, bottom and sides with required PVC/ neoprene felt etc. Aluminium section shall be smooth, rust free, stright, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap breading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately)

Anodised aluminium (anodised transparent or dyed to required shade according to IS 1868, minimum anodic coating of grade AC-15

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately) .

Providing and fixing 12mm thick prelaminated three layer medium density (exterior grade) particle board Grade I, Type II confoRming to IS : 12823 bonded with phenol foRmaldehyde synthetic resin, of approved brand and manufacture in paneling fixed in aluminium doors, windows shutters and partition frames with C.P. brass/ stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.

of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)

Prelaminated particle board with decorative lamination on both sides .

Sqm 2,80 837,17 2344,08

SUB TOTAL NO.8 698346,44


9,01 SOR-12.01

Sqm 6,66 246,96 1644,76

9,02 SOR-12.31

Sqm 643,17 2612,60 1680345,95



of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)

9,03 SOR-12.32

Sqm 90,93 2360,86 214673,00

9,04 SOR-12.29



Sqm 37,39 2381,28 89036,06

9,05 SOR-12.3



Glazed tiles of minimum thickness 5mm in flooring, treads of steps and landings laid on a bed of 10mm thick cement mortar 1 : 3 finished with flushed pointing in white cement.

White glazed tiles of minimum thickness 5mm in skirtings, risers of steps and dado laid on a bed of 12mm thick cement plaster 1 : 3 finished with flushed pointing in white cement.

of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)


Sqm 149,79 2441,41 365698,81

9,06 SOR-12.43


Sqm 29,96 3302,65 98947,40

9,07 SOR-12.44



of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)


Sqm 11,91 3641,37 43368,72


SUB HEAD -10 DOOR & WINDOW FITTINGS

10,01 SOR-14.28

a) 300 x 16 mm

Nos. 20,00 983,02 19660,40

10,02 SOR-14.29


Providing and fixing Brass Tower Bolts ( Socket Bolts) bright finished with necessary screws etc. complete.

of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)

c) 200 mm

Nos. 60,00 167,79 10067,40

10,03 SOR-14.32 Providing and fixing brass handles with necessary screws, etc. completea) 150 mm

Nos. 78,00 232,84 18161,52

10,04 SOR-14.36

Nos. 27,00 149,89 4047,03

10,05 SOR-14.38

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

Providing and fixing bright finished Brass Door Closer with necessary screws, etc. complete.

of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)

a) Hydraulic Type

Nos. 4,00 672,79 2691,16

10,06 SOR-14.66

b) 150 mm

Nos. 21,00 167,79 3523,59

10,07 SOR-14.67 Providing and fixing brass handles with necessary screws, etc. complete

a) 100mm

Nos. 21,00 121,53 2552,13

10,08 SOR-14.68 Providing and fixing brass hooks and eyes.

Providing and fixing brass tower bolts (socket bolts) bright finished with necessary screws etc. complete.

of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)

b) 150mm

Nos. 21,00 121,53 2552,13


SUB HEAD -11 PLASTERING

11,01 SOR-21.12

Sqm 1341,94 214,05 287242,26

Internal walls

11,02 SOR-21.16

Sqm 863,29 266,50 230066,79

External walls



of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)

11,03 SOR-21.26

Sqm 440,57 127,96 56375,34


6mm cement plaster to ceiling 1 : 3 (1 cement : 3 fine sand)

of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)

SUB HEAD -12 CEILING

12,01 SOR-15.21

Sqm 177,20 2066,13 366118,24

SUB TOTAL NO.12 366118,24SUB HEAD -13 ROOFING

13,01 DSR-12.41

Rm 48,00 198,55 9530,40

12.41.1 a) 75 mm diameter

13,02 DSR-12.42

12.42.5 Bend 87.5° 12.42.5.1

75 mm bend Nos. 18,00

184,76 3325,68

12.42.6 Shoe (Plain)

Providing and fixing recessed ceiling with 12.5mm tapered Gyp board which includes providing and fixing G.I perimeter funnels with nylon sleeves and screws inteRmediate channels fixed to GI seat and steel expansion fastener etc. all complete including rounding, filling and finishing the tapered and square of the board with jointing compound and two coats of primer suitable to Gypboard.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes confoRming to IS : 13592 Type A including jointing with seal ring confoRming to IS : 5382 leaving 10 mm gap for theRmal expansion.(i) Single socketed pipes :

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes confoRming to IS : 13592 Type A including jointing with seal ring confoRming to IS : 5382 leaving 10 mm gap for theRmal expansion.

of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)

12.42.6.1

a) 75 mm bend Nos. 6,00

318,21 1909,26

13,03 DSR-12.43

12.43.1

a) 75 mm Nos. 24,00

166,16 3987,84

13,04 DSR-12.44

Nos. 6,00 48,91 293,46

13,05 SOR-16.37

i) For 0.50mm thick :

Sqm 316,55 971,30 307465,02

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.


Providing Trapezoidal Polyester Coated Galvanised Steel Sheets Roofing of any colour manufactured by DYNA ROOF of 1.06m width at all levels including fitting and fixing ridging with self drilling , self tapping screws, EPDM washers etc. complete excluding the cost of purlin, rafter and trusses.

of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)

13,06 SOR-16.38

Rm 65,01 468,32 30445,49


Providing and fixing of Polyester Coated Galvanised Steel Sheets of any colour manufactured by DYNA ROOF ridges, gutters or valleys 50cm overall width 0.50mm thick with 150 mm overlapping fixed with Self Drilling & Tapping Screws with EPDM washer but excluding the cost of base frame.

of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)


14,01 SOR-21.65

Sqm 2618,20 33,28 87133,70

Quantity vide item no. 15.1/21.12Quantity vide item no. 15.2/21.16Quantity vide item no. 15.3/21.26

14,02 SOR-21.66

a) Ready mix white primer.

Sqm 116,76 33,28 3885,78

14,03 SOR-21.93

Applying one coat of cement primer of approved brand and manufacture on wall surface.


Painting with synthetic enamel paint of approved brand and manufacture in all shades on new work (two or more coats).

of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)

b) High gloss

Sqm 208,80 75,51 15766,49

14,04 SOR-21.95

b) Premium interior emulsion like Velvet touch Luxol silk etc.

Sqm 1754,91 119,51 209729,30

Quantity vide item no. 15.1/21.12Quantity vide item no. 15.3/21.26

14,05 SOR-21.98

b) Premium exterior emulsion like weathercote, weather shield etc.

Sqm 863,29 277,59 239640,68

Quantity vide item no. 15.2/21.16SUB TOTAL NO.14 556155,95

Wall painting with interior emulsion paint of approved brand and manufacture on new work (two or more coats) to give an even shade.

Finishing walls with regular exterior emulsion of required shade on new work (three or more coats) to give an even shade.

of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)

of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)

SANITARY & PLUMBING WORKSUB HEAD -15 SANITARY INSTALLATION

15,01 SOR-17.145

b) 75mm dia.

Rm 4,00 185,31 741,24

15,02 SOR-17.154

Nos. 2,00 54,34 108,68

15,03 SOR-17.06



Providing and fixing vitreous china water closet (Floor Mounted EWC Standard 'S'/SVT) of Parryware/Hindware/Cera and equivalent make including seat and lid with C.P brass hinges and rubber buffers, 10 litres low level vitreous china flushing cistern with fittings and C.I / R.S brackets, 40 mm porcelain enamelled flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required.

of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)

ii) Pastel

Nos. 11,00 6053,28 66586,08

15,04 SOR-17.43

ii) Pastel

(a) One urinal basin with flush valve/spray

Nos. 3,00 8472,50 25417,50

15,05 SOR-17.73

i) White

Providing and fixing vitreous china Urinal Flat Back Large 59 x 37.5 x 39cm of Parryware/ Hindware/ Cera and equivalent make with flush valve/spray with C.I or R.S brackets standard size of G.I flush pipe and C.P brass spreaders with brass unions and G.I clamps complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required.

Providing and fixing White vitreous china wash basin Standard of Parryware/ Hindware/ Cera and equivalent make with R.S. or C.I. brackets, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plugs, 32mm C.P. brass waste of standard pattern, 32mm C.P. brass traps and union complete including painting of fittings and brackets, cutting and making good the walls wherever required.

of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)

Nos. 12,00 3520,99 42251,88

15,06 SOR-17.9

i) White

Nos 12,00 1216,36 14596,32

15,07 SOR-17.108

(a) Standard wash basin size 630x450mm with a single 15mm C.P. brass pillar tap.

Providing and fixing vitreous china tall pedestal of Parryware/ Hindware/ Cera and equivalent make for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing Stainless steel kitchen Single Sink with drain board of Hindware/Nirali and equivalent make with R.S. or C.I. brackets, C.P. brass chain with rubber plug, 40mm C.P. brass waste and 40mm C.P brass trap with unions complete, including painting the fittings and brackets, cutting and making good the walls wherever required.

a) Single Sink with Drain Board 815x460mm (32x18 inch) with bowl size 355x410x180 mm (14x16x7 inch)

of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)

(iii) Anti-scratch

Nos. 2,00 10399,32 20798,64

15,08 SOR-17.114

b) Marble sink counter.

Sqm 1,41 3597,51 5072,49

15,09 SOR-17.119

Nos. 12,00 983,78 11805,36

15,10 SOR-17.123

Providing and fixing sink counter including cutting to required size on the prepared flat portion of RCC slab.



of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)

b) 600x20mm size.

Nos. 14,00 1126,35 15768,90

15,11 SOR-17.125 Providing anf fixing toilet paper holder.

c) Plastic toilet paper holder of standard size.

Nos. 11,00 401,63 4417,93

15,12 SOR-17.144

Nos. 10,00 72,99 729,90

15,13 SOR-17.145

Providing and fixing floor trap including cutting floor and making good the floor complete.


of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)

a) 110mm dia. Rm 80

319,82 25585,60

b) 75mm dia. Rm 60

185,31 11118,60

15,14 SOR-17.146

a) 110mm dia. Nos. 20

155,18 3103,60

Providing and fixing SWRPVC plain bend of required degree ( 87.50° ) including jointing with rubber lubricant/cement solvent complete.

of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)

b) 75mm dia. Nos. 20

93,04 1860,80

15,15 SOR-17.149

a) 110x110x110mm Nos. 8

194,01 1552,08

b) 75x75x75mm Nos. 10

116,36 1163,60

15,16 SOR-17.152

Providing and fixing single equal SWRPVC plain junction of required degree ( T-junction )

Providing and fixing SWRPVC plain junction of required degree (Y-junction) including jointing with rubber lubricant/cement solvent.

of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)

a) 110 mm Y-junction. Nos. 2

263,72 527,44

b) 75 mm Y-junction. Nos. 2

147,37 294,74

15,17 SOR-17.154

a) 110mm SWRPVC vent cowl Nos. 2

77,53 155,06

15,18 SOR-19.18 Supplying and fixing C.I. cover without frame for manholes :Nos. 4,00 1064,46 4257,84


b) 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg.

of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)

15,19 SOR-19.35

Nos. 2,00 2198,24 4396,48


Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.

of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)


16,01 SOR-18.02

Litres 15000,00 11,85 177750,00

16,02 SOR-18.03

(a) 20mm dia nominal bore

Rm 60,00 192,88 11572,80

16,03 SOR-18.04

Rm 60,00 128,08 7684,80

16,04 DSR-18.12


Providing and fixing G.I. pipes complete with G.I. fitting and clamps, including cutting and making good the walls etc. (internal works).

Extra for concealed in brick and RCC works by making chases upto 7.5x7.5cm in walls and making good the same after housing pipes, etc.

Providing and fixing G.I. Pipe complete with G.I fittings including trenching and refilling etc. External Work:

of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)


Rm 60,00 243,70 14622,00

16,05 DSR-18.49 Providing and fixing C.P bib cock of approved quality confoRming to IS:8931.


Nos. 11,00 654,38 7198,18

16,06 SOR-18.19 Providing and fixing chromium plated brass stop cock of approved quality.a) 20mm nominal bore

Nos. 3,00 702,54 2107,62


of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)

SUB HEAD -17 FIRE FIGHTING

17,01 SOR-29.22 Providing and fixing portable fire extinguisher a) Fire Extinguisher Water - CO2 type, capacity - 9 litres Nos. 20,00 6207,45 124149,00


SUB HEAD -18 MISCELLEOUS BUILDING WORK

18,1 SOR-26.11

Sqm 37,80 2282,83 86290,98

Providing and fixing factory made medium density particle board door shutters flat pressed three-layer prelaminated particle board exterior grade, confoRming to IS : 3087 grade-I and prelamination confoRming to IS : 12823 Grade - I Type II both side decorative matt lamination of approved design, and edges sealed with water resistant paint and lipped with aluminium 'U' type edge beading alround the shutter, including fixing with angle cleat, grip strip, cadmium plated steel screws including fixing of aluminium hinges 100x63x4 mm etc. complete as per architectural drawing and direction of Engineer-in-Charge (cost of 'U' beading and hinges will be paid for separately) :

of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)

18,2 DSR-9.12

Sqm 19,50 4409,80 85991,10


Providing and fixing 30mm thick factory made PVC rigid foam panelled door shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for styles and 15x15mm for top and bottom rails, covered with heat moulded PVC "C" channel of 5mm thick sheet and 30x50mm wide to foRm styles and 5mm thick and 75mm wide PVC sheets for top rail, lock rail and bottom rail on either side and 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom rail, panelling of 5mm thick PVC sheet fitted in the M.S. frame welded/sealed to the styles and rails with 5x30mm PVC sheet beading on either side and joined together with solvent cement adhesive etc., complete as per manufacturers specification and direction of Engineer-in-Charge fixed to frames with 4 Nos. M.S. powder coated butt hinges (For W.C. and bathroom shutters).

of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)


19,01

19.01.1 20mm Metre 800 32800,00

19.01.2 25mm Metre 400 18800,0019.01.3 32mm Metre 260 14560,00

19,02

19.02.1 2 X 1.5 sq. mm Metre 700 17500,0019.02.2 2 X 2.5 sq. mm Metre 400 12800,0019.02.3 2 X 4 sq. mm Metre 120 5160,0019.02.4 2 X 6 sq. mm Metre 210 12390,0019.02.5 4 X 6 sq. mm Metre 18 1908,00

19,03

19.03.1 2 Pair Metre 360 6840,00

19,04

19.04.1 1 or 2 module (75mm X 75mm) Each 18 1584,0019.04.2 4 module (125mm X 75mm) Each 65 7345,0019.04.3 6 module (200mm X 75mm) Each 4 612,0019.04.4 8 module (125mm X 125mm) Each 1 177,00



Telephone wiring in Existing Conduit: Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated Copper Conductor , unaRmoured telephone Cable in the existing surface/ recessed steel/ PVC Conduit as required.


of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)

19.04.5 12 module (200mm X 150mm) Each 13 2925,00

19,05

19.05.1 5/6 amps Switch Each 158 7268,0019.05.2 2 Way 5/6 amps switch Each 0 0,0019.05.3 15/16 amp switch Each 8 536,0019.05.4 3 pin 5/6 amp socket outlet Each 34 2176,0019.05.5 6 pin 15/16 amp socket outlet Each 23 2323,0019.05.6 Telephone socket outlet Each 24 1464,0019.05.7 TV Antenna socket outlet Each 0 0,00

19,06

Each 7 1561,00

19,07

Each 266422,00

19,08Each 4

104,00

19,09

19.09.1 8 way (4+18) double way horizontal type Each 2 3606,00




S/F Call bell/ buzzer: Supplying and fixing call bell/ buzzer suitable for D.C /A.C. single phase, 230 volts, complete as required.


of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)

19.09.2 4 way (4+18) double way horizontal type Each 1 1311,00

19,10

19.10.1 single pole Each 40 3760,00

19,11

Set 216000,00

19,12

Metre 1001600,00

19,13

19.13.1 4 way with 100 amps MCCB as incomer Each 1 2992,00

19,14

19.14.1 40A Each 1 1555,37




S/F vertical typr TP MCB DB: Supplying,installation,testing and commissioning of surface/recess mounting,vertical type,415 volts,TPN MCB distribution board of sheet steel,dust protected,duly phosphatizes and powder painetd,inclusive of 200 amps tinned copper busbar,common neutral link,earth bar,din bar for mounting MCB's detchable gland/knock out plate, and with 100 amps,10 KA MCCB as incomer interconnection between incomer MCCB and busbars of following ways(but without MCB's) as required. (Note: Vertical type MCB TPDB is noRmally used where 3 phase outlets are required.)

Supplying with fitting and fixing TPN 10 KA 415 V 50 Hz MCB of the following capacity complete with necessary connection as specified and directed by the deptt.

of 121



2007 /DSR-2007/NS

Rate (`) Amount (`)

19.14.2 63A Each 2 3441,54

19,15

19.15.1Per Metre 30

15365,10

19,16

(C) Medium point Each 153 119493,00SUB TOTAL NO.19 326379,01NOTE: 19.01 to 19.13 As Per CPWD Schedule,2007Item No. 19.14,19.15 As Per APWD Schedule,2010-2011Item No.19.16 As Per Mizoram PWD Schedule,2007

TOTAL (SL. NO. 1 TO SL. NO. 19) 19082124,68

Wiring for sub-main line with P.V.C. insulated unsheathed I.S.I. marked single core copper conductor cable in surface rigid PVC. Casing caping conduit wiring system including earth continuity cable with PVC. Insulated unsheathed copper single core conductor,painting etc.as required.4 x 10.00 Sq.mm + 1 x 2.5 Sq.mm with 38mm dia, 2.5mm thick rigid PVC Pipe

A:01:01 : LIGHT POINT,CEILING FAN POINT, ETC (modular type) Wiring in looping system with PVC wire 1.5 Sqmm standard copper wire/ conductor as per IS:694 (1990) and FIA & TAC , approved, ISO-9001 certified company make, the conductors/wires PVC insulation strength of standard 650/1100 volts graded, stranded copper cable running inside UPVC conduit pipe (heavy duty) 20mm diameter fixed, recessed inside the wall/ceiling/floor as per convenience including joint box having required numbers ways from control switch to light point etc.,(with PVC/Steel Box and phenolic laminated sheet cover) in completed.

of 121

CONSTRUCTION OF EXTENSION OF ADM. BUILDING AT MIZORAM UNIVERSITY, TANHRIL CAMPUS

SL. NO. SOR No Description of Item Unit QuantityRate

CIVIL WORKSUB HEAD -1 EARTHWORK IN EXCAVATION

1,01 DSR- 2.6

2.6.1 Ordinary and Hard soil

cum 164,00 212,87

1,02 DSR- 2.7

2.7.1 Ordinary Rock

cum 1037,07 318,93

1,03 DSR- 2.25

cum 596,12 95,51

1,04 SOR-2.21

cum 18,80 1254,18

SUB TOTAL NO. 1

SUB HEAD -2 PLAIN CEMENT CONCRETE WORK

2,01 DSR- 4.1

4.1.8

cum 65,57 5118,41

SUB TOTAL NO. 2

RATE (`)




Providing and filling stone aggregates of size below 90mm in plinth, etc. in layers not exceeding 10 cms in depth, consolidating each layer by ramming and watering and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level1:4:8 (1 Cement :4 Coarse Sand:8 Graded Stone Agrrgate 40mm Nominal Size)

of 121



RATE (`)


3,01 DSR-5.1

5.1.3

cum 69,45 7021,56

3,02DSR-5.22

5.22.6

TheRmo - Mechanically Treated bars.

Kg 130837,24 89,24

Design Mix Concrete

3,04 DSR- 5.2

a)

5.2.2

cum 683,84 8553,01

3,05 DSR-5.9

5.9.1

Foundations, footings, bases of columns, etc., for mass concrete. sqm

68,79 249,23

5.9.3Suspended floors, roofs, landings, balconies and access platfoRm

sqm2436,26 391,56

5.9.5

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

sqm1743,07 339,73

5.9.6 Columns, Pillars, Piers, Abutments, Post and struts sqm 909,78 498,265.9.7 Stairs (excluding landings} except spiral staircases. sqm 110,40 426,36

Providing and laying in possition specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level

1:2:4 (1cement: 2 Coarse Sand: 4graded stone aggregate 20 mm nominal size)


Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, filets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement:1:1.5:3 (1 Cement:1.5 Coarse Sand: 3 Graded Stone Agrregate 20 mm nominal size)


of 121



RATE (`)

5.9.13 sqm 193,40 596,80

SUB TOTAL NO. 3


of 121



RATE (`)

SUB HEAD -4 BRICK WORKS

4,01 NS

(c) in cement mortar 1:4 (1 cement : 4 fine sand) cum 11,35 7990,00

4,02 NS

b) in cement mortar 1 : 4 ( 1 cement : 4 fine sand ) sqm 1398,06 924,72

External WallsSUB TOTAL NO. 4

SUB HEAD -5 STONE WORKS5,01 SOR-7.06

cum 705,99 5470,63

b) in cement mortar 1 : 4 ( 1cement : 4 fine sand)SUB TOTAL NO. 5

SUB HEAD -6 WOOD WORKS & PVC WORKS

6,01 DSR-9.1

cum 3,546 108868,10

9.1.1 Second class teak wood6,02 DSR-9.7

sqm 60,48 2248,00




Coursed masonry with rectangular sized hard stone in foundation upto one storey above and below ground level including curing, etc. complete.



of 121



RATE (`)

6,03 DSR-9.120 Providing and fixing

9.120.1 sqm 42,84 4409,80

6,04 SOR-9.61

meter 629,10 144,60

100mm X 30mmSUB TOTAL NO.6

30mm thick factory made PVC door sutter consisting of frame made out of M.S tube of 19 gauge thickness and size of 19x19mm for styles and 15x 15 mm for top & bottom rails. M.S frame shall have a cost of steel primers of approved make anfd manufacture. M.S frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 450 angle on either side forming style; and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 450 on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of panel 10 mm (5mmx2) thick, 20 mm wide cross PVC sheet be provided as gap inset for top rail & bottom rail. panelling of 5 mm thick both side PVC sheet to be fitted in the M.S frame welded/sealed to the styles & rail with 7 mm (5 mm+2mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adesive . An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of 'C ' chanel using PVC solvent adhesive etc complete as per direction of EIC. Manufacture's specification & drawing (for W.C and bathroom door shutter)

Providing and fixing dressed & chamfered 1st class local wood door and window architrave of size fixed with wooden plug on door chaukhat etc complete.

of 121



RATE (`)

SUB HEAD - 7 STEEL WORK

7,01 SOR-5.15Nos.

Fan Clamps

31,00 65,81

7,02 MR

Rm 385,20 4613,80

SUB TOTAL NO.7

SUB HEAD -8 ALUMINIUM WORKS

8,01 SOR-11.01

sqm 293,75 4883,07


8,02

DSR-21.3

Sqm 293,75 1159,85

21.3.1 With float glass panes of 4.0 mm thickness

Providing and fixing MS fan clamp 12mm dia HYSD bar bent to shape with hooked endin RCC slabs during laying including painting the exposed portion of loop complete.

Supplying and fixing of Mild Steel railing with necessary ballusters, railings etc as per detailed drawings

Providing and fixing anodised aluminium work for windows and ventilators with extruded built up standard sections of approved make conforming to IS : 733 and IS : 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/ neoprene gaskets etc.Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whenever required including cleat angle, aluminium snap beading for glazing /panelling, CP brass /stainless steel screws all complete including fixing of glasses but excluding cost of glasses.


Providing & Fixing glazing in aluminium door, window, ventilator shutters and partition etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the direction of EIC. (Cost of aluminium snap beading shall be paid in basic item)

of 121



RATE (`)

SUB TOTAL NO.8


Vetrified Tile Flooring9,01 SOR-12.31

sqm 735,69 2612,60

(a) Fixed with white cement

9,02 SOR-12.32

sqm 75,14 2360,86

a) Fixed with white cement

9,03 SOR-12.01

sqm 395,64 246,96

9,04 SOR-12.04

sqm 35,73 310,49

(a) 18mm thick

9,05 SOR-12.15

sqm 148,60 670,27

c) Dark shade using ordinary cement




Cement plaster skirting or dado (upto 30cm height) with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement including rounding of junction with floor.

Chequered precast cement concrete tiles 22mm thick with marble chips of size upto 6mm in floor, treads of step, landing, foothpath and courtyard jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and cleaning etc. complete on 20mm thick bed of cement mortar 1 : 4 .

of 121



RATE (`)

9,06 SOR-12.43

sqm 468,78 3713,48

d) Pearl Super white

9,07 SOR-12.44

sqm 40,29 4052,20

d) Pearl Super white

9,08 SOR-12.23

sqm 255,90 1706,61

a) (ii) Plain 200 mm x 300 mmToilet Skirting

SUB TOTAL NO.09

SUB HEAD -10 DOORS AND WINDOWS FITTINGS

10,01

SOR-14.01 nos. 366,00 116,35

10,02 SOR-14.28

a) 300 x 16 mm

Nos. 42,00 983,02

10,03DSR-9.74



Ceramic tiles 7.1mm thick conforming to IS : 13753 in wall, skirting and risers of steps not exceeding 30cm in height, on 12mm thick cement plaster 1 : 3, jointed with neat cement cement slurry including pointing in white cement mixed with pigment of matching shade complete.

Providing 40 x 5mm flat iron hold fast 40 cm long including fixing to frame with 10mm dia. bolts, nuts and wooden plugs and embeddings in cement concrete block 30 x 10 x 15cm 1:3:6 mix (1 cement : 3 sand : 6 well graded stone aggregate 20 mm nominal size)


Providing and fixing brass tower bolts (barrel type) bright finished with necessary screws etc. complete.

of 121



RATE (`)

9.74.1

a) 250 x 10 mm

Nos. 54,00 324,26

10,04 SOR-14.32 Providing and fixing brass handles with necessary screws, etc. complete.a) 125 mm

Nos. 84,00 217,96

SUB TOTAL NO. 10

SUB HEAD -11 FINISHING -PLASTERING

11,01

SOR-21.17 20mm cement plaster 1 : 4 (1 cement : 4 fine sand).

sqm 1349,48 235,74

11,02

SOR-21.13 15mm cement plaster 1 : 4 (1 cement : 4 fine sand).

sqm 2278,76 190,36

11,03 SOR-21.27 6mm cement plaster to ceiling 1 : 4 (1 cement : 4 fine sand). sqm 4265,73 91,52

SUB TOTAL NO.11

SUB HEAD -13 ROOFING AND WATER PROOFING

13,01 DSR-12.41

12.41.2 Single socketed pipes 110 mm diameter

Rm 283,50 341,51

Providing and fixing on wall face unplasticised Regid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

of 121



RATE (`)

13,02 DSR-12.42

12.42.2 Single pushfit Coupler:12.42.2.2 (b) 110 mm

No. 63,00 290,20

13,03 12,40

12.40.2 (b) 110 mm

No. 147,00 341,51

13,04 DSR-12.44

No. 21,00 48,91

13,05 SOR-16.47

Sloof roof

sqm 821,55 1816,15

SUB TOTAL NO.13


14,01

DSR-13.40 sqm 6544,48 54,97

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes confoRming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

Providing and fixing on wall face unplasticised Regid PVC rain water pipes conforming to IS: 13592 type A including jointing with seal ring conforming to IS: 5382 leaving 10 0 mm gap for thermal expansion.


Providing and laying machine made Pressed Clay Roof Tiles on sloping roof and chajjas over 20mm thick base of cement mortar 1:3 and jointed with cement slurry and joints flush with mortar 1:3 complete.

Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including priming coat of whiting to give an even shade

of 121



RATE (`)

14,02 SOR-21.85

sqm 6544,48 61,77

14,03 SOR-21.89

sqm 2128,48 82,70

14,04 SOR-21.83

(a) Ready mix white primer

sqm 120,96 34,55

14,05 SOR-21.93

a) General quality

sqm 413,28 69,21

14,06 SOR-21.1

sqm 62,91 107,03

SUB TOTAL NO.14

Distempering with 1st quality acrylic washable distemper of approved brand and manufacture and of required shade and colour to give an even shade on new work (two or more coats).

Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade on new work (three or more coats) to give an even shade.


Painting with synthetic enamel paint of approved brand and manufacture in all shade on new work (two or more coats).

Varnishing with copal varnish of approved brand and manufacture on new work (two or more coats) of glue sizing over an under coat of flatting varnish.

of 121



RATE (`)

SUB HEAD - 15 SANITARY INSTALLATIONS

15,01

DSR-17.1

17.1.1

each 25,00 4816,72

15,02 SOR-17.05

ii) Pastel

each 5,00 5887,26

15,03 SOR-17.42

(i)White(a) One Urinal basin with flush valve spray

Nos. 5,00 4786,38

15,04DSR-17.19

Providing and fixing water closrt squatting pan (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixures complete including cutting and making good the walls and flooors wherever required:

White vitreous china Orissa pattern W.C. pan of size 580X440 mm with integral type foot rests.

Providing and fixing vitreous china water closet (Floor Mounted EWC Standard 'P'/PVT) of Parryware/Hindware/Cera and equivalent make including seat and lid with C.P brass hinges and rubber buffers, 10 litres low level vitreous china flushing cistern with fittings and C.I / R.S brackets, 40 mm porcelain enamelled flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required.

Providing and fixing vitreous china Urinal Flat Back Small 44 x 26.5 x 31.5cm size of Parryware/ Hindware/ Cera and equivalent make with flush valve/spray with C.I or R.S brackets standard size of G.I flush pipe and C.P brass spreaders with brass unions and G.I clamps complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required.

Providing and fixing controlled flush, low level cistern made of vitreous china with ball fittings complete

of 121



RATE (`)

17.19.1

10 litre (full flush) capacity white

each 15,00 2463,69

15,05 SOR-17.74

(i) White(b) Compact wash basin of size 450x300mm without pillar tap.

No. 30,00 1844,26

15,06

DSR-17.8 each 30,00 1475,33

15,07

DSR-17.31 each 30,00 1031,73

15,08 SOR-17.123

b) 600x20mm size.

each 10,00 1126,35

15,09 SOR-17.125 Providing and fixing toilet paper holder.

Providing and fixing vitreous china wash basin compact of Parryware/ Hindware/ Cera and equivalent make with R.S. or C.I. brackets, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plugs, 32mm C.P. brass waste of standard pattern, 32mm C.P. brass traps and union complete including painting of fittings and brackets, cutting and making good the walls wherever required.

Providing and fixing whitevitreous china l pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.



of 121



RATE (`)

b) C.P. brass toilet paper holder of standard size.

each 5,00 296,62

15,10 SOR-17.127

each 5,00 806,66

15,11 SOR-17.128

a) 100mm dia.

No. 116,00 136,65

15,12 DSR-17.35 Providing and fixing soil, waste and vent pipe.

17.35.1 100mm dia.

17.35.1.1 Sand cast iron S&S Pipe as per IS : 1729

rm 494,00 942,59

15,13DSR-17.38

17.38.1.1 Sand cast iron S&S Pipe as per IS : 1729

each 332,00 532,95

15,14 DSR-17.4 Providing and fixing heel rest sanitary bend.17.40.1.1 Sand cast iron S&S Pipe as per IS : 1729

Providing and fixing chromium plated soap dish with brackets fixed to wooden cleats with brass screws.

Providing and fixing M.S holder bat clamps of approved design to sanitary / drainage pipe embedded in and including cement concrete block 10x10x10cm of 1:2:4 mix (1cement : 2coarse sand : 4aggregate 20mm nominal size) including cost of cutting holes and making good the wall etc. complete.

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.

of 121



RATE (`)

SCI Heels

each 15,00 511,01

15,15DSR-17.43

17.43.1

(a) 100x100x100mm

each 64,00 782,91

15,16DSR17.6

17.60.1.2

a) 100 mm inlet and 100 mm outlet.

each 29,00 923,99

SUB TOTAL NO.15


16,01 SOR-18.02

Syntex Tanks

litre 12000 11,85

16,02

DSR-18.7

18.7.1 a) 15mm dia. Nominal outer dia pipes

rm 298,00 204,72

Providing and fixing single equal plain junction of required degree with acess door, insertion rubber washer 3 mm thick, bolts and nuts complete

Providing and fixing sand cast iron trap of self cleansing design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors.


Providing and fixing CPVC pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This include jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of EIC

of 121



RATE (`)

16,03

DSR-18.8

18.8.1

15mm dia. nominal outer dia pipe

rm 298,00 324,26

16,04

DSR-18.9

18.9.3 c) 25mm dia nominal outer dia PIPES

rm 270,00 302,11

16,05 SOR-18.16 Providing and fixing chromium plated brass bib cock of approved quality.a) 15mm nominal bore

No. 30,00 586,81

SUB TOTAL NO.16

SUB HEAD -17 MISCELLANEOUS BUILDING WORKS

17,0 SOR-26.04

a) White Agaria Marble Stone

sqm 13,50 3216,30

SUB TOTAL NO.17


Providing and fixing CPVC pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This include jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per EIC

Providing and fixing CPVC pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This include jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as pet direction of EIC

Providing and fixing stone slab table rubbed and polished of size 105cmx60cm deep and 1.8 cm thick fixed in urinal partitions with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) and finished smooth.

of 121



RATE (`)

18,01

18.01.1 20mm Metre 3000,0018.01.2 25mm Metre 3000,0018.01.3 32mm Metre 1650,00

18,02

18.02.1 2 X 1.5 sq. mm Metre 5700,0018.02.2 2 X 2.5 sq. mm Metre 1710,0018.02.3 2 X 4 sq. mm Metre 130,0018.02.4 4 X 6 sq. mm Metre 110,00

18,03

18.03.1 2 Pair Metre 700,00

18,04

18.04.1 1 or 2 module (75mm X 75mm) Each 46,00 18.04.2 4 module (125mm X 75mm) Each 189,00 18.04.3 6 module (200mm X 75mm) Each 1,00 18.04.4 8 module (125mm X 125mm) Each 2,00 18.04.5 12 module (200mm X 150mm) Each 5,00

18,05Each 36,00

18,06

18.06.1 5/6 amps Switch Each 766,00 18.06.2 2 Way 5/6 amps switch Each - 18.06.3 15/16 amp switch Each 7,00



Telephone wiring in Existing Conduit: Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated Copper Conductor , unarmoured telephone Cable in the existing surface/ recessed steel/ PVC Conduit as required.


Supply & Fixing Module blanking plate on the existing modular plate & switch box excluding module plate as required.


of 121



RATE (`)

18.06.4 3 pin 5/6 amp socket outlet Each 152,00 18.06.5 6 pin 15/16 amp socket outlet Each 15,00 18.06.6 Telephone socket outlet Each 32,00 18.06.7 TV Antenna socket outlet Each -

18,07

Each 10,00

18,08Each 298,00

18,09Each 32,00

18,10Metre 700,00

18,11

18.11.1 6 way (4+18) double way horizontal type Each 10,00

18,12

18.12.1 single pole Each 72,00

18,13Set 2,00



Supplying including fitting and fixing of surface mounting in and out box for computer connector including plug in RJ-45 computer data outlet.

Supplying including drawing of CAT 5 cable through existing 2mm thick 25mm dia PVC conduit in recessed system.




of 121



RATE (`)

18,14Metre 100,00

18,15

18.15.1 TP 10 KA 240//415 50 Hz MCB18.15.2 16A Each 118.15.3 40A Each 5

18,16

18.16.1 TPN 10 KA 240//415 50 Hz MCB18.16.2 16A Each 118.16.3 [40A Each 5

18,17

(C) Medium point Each 466,00SUB TOTAL NO.18

NOTE: Item No.18.09,18.10, 18.15 & 18.16 As Per APWD Schedule,2010-2011Item No. 18.17 As Per Mizoram PWD Schedule,2007

TOTAL (Sl. No. 1 to Sl. No. 18)


Supplying with fitting and fixing TP 10 KA 415V 50Hz MCB of following capacity complete with making necessary connections as specified and directed by the Deptt. [Legrand/Merlin Gerin/Hagger make]

Supplying with fitting and fixing TPN 10 KA 415V 50Hz MCB of following capacity complete with making necessary connections as specified and directed by the Deptt. [Legrand/Merlin Gerin/Hagger make]

A:01:01 :LIGHT POINT,CEILING FAN POINT, ETC (modular type) Wiring in looping system with PVC wire 1.5 sqmm standard copper wire/ conductor as per IS:694 (1990) and FIA & TAC , approved, ISO-9001 certified company make, the conductors/wires PVC insulation strength of standard 650/1100 volts graded, stranded copper cable running inside UPVC conduit pipe ( heavy duty ) 20mm diameter fixed, recessed inside the wall/ceiling/floor as per convenience including joint box having required numbers ways from control switch to light point etc.,(with PVC/Steel Box and phenolic laminated sheet cover) in completed.

of 121


34910,68

330755,50

56937,21

23578,59

446181,98

335614,15

335614,15

AMOUNT(`)

of 121


AMOUNT(`)

487647,62

11676307,81

5848891,39

17144,71

953945,62

592172,3453303,3547070,15

of 121


AMOUNT(`)

115421,03

20191903,98

of 121


AMOUNT(`)

90690,50

1292816,36

1383506,86

3862210,08

3862210,08

386046,29

135959,29

of 121


AMOUNT(`)

188915,64

90967,86

801889,08

of 121


AMOUNT(`)

2040,11

1777235,76

1779275,87

1434401,82

340704,62

of 121


AMOUNT(`)

1775106,44

1922063,70

177395,03

97707,26

11093,81

99602,13

of 121


AMOUNT(`)

1740805,16

163263,14

436721,50

4648651,73

42585,34

41286,84

of 121


AMOUNT(`)

17510,23

18308,64

119691,05

318126,42

433784,76

390399,611142310,79

96816,96

of 121


AMOUNT(`)

18282,38

50201,39

1027,03

1492058,04

1658385,80

359730,44

of 121


AMOUNT(`)

404252,53

176025,30

4179,17

28603,11

6733,26

979523,81

of 121


AMOUNT(`)

120417,97

29436,30

23931,90

of 121


AMOUNT(`)

36955,38

55327,80

44259,93

30951,86

11263,50

of 121


AMOUNT(`)

1483,10

4033,30

15851,40

465639,46

176939,40

of 121


AMOUNT(`)

7665,08

50106,50

26795,69

1101058,57

142200,00

61005,22

of 121


AMOUNT(`)

96630,53

81569,57

17604,30

399009,62

43420,05

43420,05

of 121


AMOUNT(`)

123000,00141000,0092400,00

142500,0054720,005590,00

11660,00

13300,00

4048,0021357,00

153,00354,00

1125,00

720,00

35236,000,00

469,00

of 121


AMOUNT(`)

9728,001515,001952,00

0,00

2230,00

73606,00

27074,56

13559,00

16340,00

6768,00

16000,00

of 121


AMOUNT(`)

1600,00

985,547414,10

1296,109428,65

363946,001201074,95

41868814,81

name of work : construction of (i) extension of...

Documents