name : dr. virender narula 2. educationtraining mriirs mriirs campus faridabad 29/01/2019 11. iso...

1. NAME : Dr. VIRENDER NARULA

2. EDUCATION

PhD: Awarded PhD on ‘Development, Application and Comparison

of Six Sigma methodology in Service Industry’ from Department of

Mechanical Engineering from Y M CA University of Science &

Technology, Faridabad 2016.

M. Tech. (Hons.) (Manufacturing & Automation) from YMCA

University of Science and Technology Faridabad 2006.

B.E. (Mechanical) From Marathwada University Aurangabad, 1997.

3. ACADEMIC EXPERIENCE

Professor in department of mechanical engineering, faculty of engineering and technology,

Manav Rachna International Institute of Research and Studies (MRIIRS) Faridabad. July 2013 –

Till date.

Senior Consultant -(Academic) with National Project Implementation Unit (MHRD Govt. of India)

January 2012 –May 2013.

Associate Professor and Head of Mechanical Engineering Department with Shri Ram College of

Engineering & Management Palwal. September 2010- Jan 2012.

Assistant Professor and Head of Mechanical Engineering department with Apeejay College of

Engineering, Sohna, Gurgaon. October 2001 - August 2010.

Lecture with Manav Rachna International Institute of Research and Studies (MRIIRS) (Formerly

Career Institute of Technology and Management) January 2000 – October 2001.

Lecture with Lingaya’s Vidyapeeth (Formerly Lingaya’s Institute of Management and technology)

August 1998 - January 2000.

4. NON ACADEMIC EXPERIENCE

Impaneled Certified Master trainer and Assessor with Quality Council of India (QCI) for ZED

Model of Maturity assessment. Conducted five days ZED Capacity Building Training Program and

ZED awareness program on behalf of QCI. Conducted ZED Assessments for three MSMEs (2017)

Empaneled Trainer with Imperial Auto industries Faridabad and Conducted Training Programs

on Geometric Dimensioning and Tolerance, P-PAP, Problem Solving and SPC tools (2017 – till

date).

Faculty with Sona Skill Development Centre Gurgaon (2014 – till date) and conducted training

programs on conducted Training Program as Freelancer Trainer on Geometric Dimensioning and

Tolerances, Statistical Process Control, Measurement System Analysis, Six Sigma DMAIC

Methodology, Seven Quality Tools and Principles and Practice of 5S for Manufacturing

Industries located in NCR .

Technical Expert with TUV SUD ISO 9001: 2008 for educational scope and conducted Process

audit of various prestigious institutions including Delhi Metro Training School, Forest Research

Institution, ARNI University Himachal Pradesh, Jaipuria Institute of Management Ghaziabad etc.

(2009 – till date)

Worked on a Six sigma Black Belt rejection reduction Consultancy Project “Reducing xylene filling

related rejections in Mechanical Temperature Gauge Assembly” with Indication Instruments

Faridabad.(2009)

Worked on Six sigma Cost reduction projects for JCB Limited Faridabad in association with Wipro

technologies. The Projects involved saving of 100 lacs per annum in Machining and MIG Welding

Process by implementation of Six Sigma DMAIC methodologies. (2008)

Graduate Engineer Trainee with UT Limited Faridabad. ( June 1997-August 1998)

CORPORATE TRAININGS, ASSESSMENTS AND CONSULTANCY PROJECTS a. CORPORATE TRAININGS DELIVERED

S.No Training Description Organization name Venue Date

1. Geometric

Dimensioning and

Tolerances -Basics

Osaw Agro Industry Corporate office Pooja

Vihar, Ambala Jagadhri

Road - 133001

04/01/2020

2. Geometric

Dimensioning and

Tolerances –

Advanced

Osaw Agro Industry Jagadhri Road

Pooja

Vihar, Ambala - 133001

05/01/2020

3. Statistical Process

Control

SGS International Private

Limited


Limited, Gurgaon

21/09/2019

4. Measurement System

Analysis


Limited


Limited, Gurgaon

22/09/2019

5. Principles and

Practice of 5 S and 3M

Imperial Auto Industries

(IAI)


13/6, Mathura Road,

Faridabad – 121003

12/08/2019


6. Geometric

Dimensioning and

Tolerances


(IAI)


13/6, Mathura Road,


14/06/2019

7. Inventory

Management


(IAI)


13/6, Mathura Road,


24/04/2019

8. Value Engineering /

Value Analysis


(IAI)


13/6, Mathura Road,


23/02/2019

9. Quality Management

For Entrepreneurs

Entrepreneurship

Development Program

(TEDP)

MRIIRS Campus Faridabad 15/02/2019

10. ISO 9001:2015

Internal Auditors

Training

MRIIRS MRIIRS Campus Faridabad 29/01/2019

11. ISO 9001:2015

Awareness Training


12. Process FEMA Imperial Auto Industries

(IAI)


13/6, Mathura Road,


08/09/2018

13. Problem Solving Tools

and SPC


(IAI)


13/6, Mathura Road,


17/06/2018

14. Production Part

Approval Process

(P-PAP)


(IAI)


13/6, Mathura Road,


05/05/2018

15. ZED Consultant

Training Program

Quality Council of India

(QCI)

Institution of Engineers

Building New-Delhi

14/03/2018

16. Geometric

Dimensioning and

Tolerances


(IAI)


13/6, Mathura Road,


18/12/2017


17. Geometric

Dimensioning and

Tolerances

Krishna Maruti and other

automotive Industries

Hotel Masaika, Faridabad 25/11/2017

18. Training Program on

Quality Concepts


19. ZED Awareness

Training Program

I amSMEofIndia in

association with QCI

Hotel Radisson Blue

Faridabad

02/11/2017

20. Geometric

Dimensioning and

Tolerances Basic

Anand Group of

Industries

Anand University Sector

22, Gurgaon

14/09/2017

21. Geometric

Dimensioning and

Tolerances Advanced

Anand Group of

Industries

Anand University Sector

22, Gurgaon

15/09/2017

22. ZED Capacity Building

Training Program for

MSMEs


(QCI)

Bhiwari Manufacturer

Association office, Bhiwari

18/03/2017

-

22/03/2017

23. ZED Training Program

as Observer


(QCI)

Institution of Engineers

Building, New-Delhi

16/03/2017

-

17/03/2017


Control

Minda Industries,

Manesar - Gurgaon

Minda Industries,

Manesar

18/01/2017

25. Six Sigma

Methodology

Talbros Automotive

Components Faridabad

Talbros, Faridabad 17/12/2016

26. FDP on Application of

Six Sigma

Methodology in

Technical Education

MRIIRS Faridabad MRIIRS Campus Faridabad 16/01/2016


27. Geometric

Dimensioning and

Tolerances-Basic

Denso Subros Noida C-51, Phase-II, Noida 06/02/2015

28. Geometric

Dimensioning and

Tolerances-Advanced

Denso Subros Noida C-51, Phase-II, Noida 07/02/2015

29. Geometric

Dimensioning and

Tolerances-Basic

Sona Skill Development

Center - Gurgaon

Info city, Sector - 34,

Gurgaon

08/09/2014

30. Geometric

Dimensioning and

Tolerances-Advanced

Sona Skill Development

Center - Gurgaon

Info city, Sector - 34,

Gurgaon

09/08/2014


Analysis-Basic

Norgain IMI, Noida A-62, Sector 63, Noida 21/03/2014


Analysis-Advanced

Auto LEk, Palwal 49th KM, Milestones,

Mathura Road, Prithla

11/01/2014


Control

FCC - RICO RICO Limited, Plot No 5,

Sector-3, IMT Manesar

24/12/2013


Control- Basic

Maneta Industries,

Sonipat

Plot 49, sector 53, HSIIDC,

Sonipat

21/03/2013


Control- Advanced

Maneta Industries,

Sonipat


Sonipat

22/03/2013


Analysis

Maneta Industries,

Sonipat


Sonipat

23/03/2013

37. Principles and

Practice of 5S

Punchratan Industries,

Rohtak

74 K.M. stone, Jind Road,

Rohtak

06/02/2013

a. ZED ASSESSMENTS AND ISO 9001:2008 AUDITS AS TECHNICAL EXPERT

S.No. Description Organization Dates

1. ZED Assesment of

MSME

MSME – Faridabad 12/02/2018

14/02/2018

2. ZED Assesment of

MSME

MSME – Ludhiana 02/09/2017-

06/09/2017

3. ZED Assesment of

MSME

MSME – Goa 17/08/2017

18/08/2017

4. ISO 9001 AUDIT Delhi Metro Rail Corporation, Shastri Park - New

Delhi

18/05/2010

5. ISO 9001 AUDIT Jaipuria Institue of Management , Ghaziabad 05/03/2009

6. ISO 9001 AUDIT Forest Research Institute, Dehradoon 12/06/2009

7. ISO 9001 AUDIT AFS delhi 30/04/2009

b. INDUSTRIAL CONSULTANCY PROJECTS

S.No. Description Organization Dates

1. Cost saving by enhancing production

capacity and defect rejection in

Assemblying.

SAI Group Global, Bhiwari September 2019-

TILL Date

2. ISO 9001:2015 Consultancy for Central

Library, Examination Unit and CRCMC

(MRIIRS)

MRIIRS, FARIDABAD September 2018-

Till Date

3. Cost saving by reducing defects in the

sheetmetal components.

PSR Auto Component,

Faridabad.

July 2018 – March

2019

4. Six sigma Cost reduction project in

Machining and MIG welding processes

for JCB Limited Faridabad in association

with Wipro technologies.

JCB Faridabad January 2009 –July

2009

5. Six sigma Black Belt rejection reduction

Consultancy Project “Reducing xylene

filling related rejections in Mechanical

Temperature Gauge Assembly”

Indication Instruments

Faridabad

January 2008 –

June 2008

5. CERTIFICATE OF PROFESSIONAL REGISTRATIONS

CQI & IRCA Certified Lead Auditor ISO 9001:2015, 2018

QCI Certified Assessor for ZED Maturity Assessment Model, 2018.

QCI Certified Master Trainer for ZED Maturity Assessment Model, 2017.

ISI Certified Six Sigma Black Belt (Indian statistical Institute), 2008.

NABET Recognized Lead Auditor QMS 9001:2008, 2008.

ISI Certified Six Sigma Green Belt (Indian statistical Institute), 2007.

6. MEMBERSHIP OF PROFESSIONAL ORGANIZATION

Faculty Advisor, ISTE Student Chapter at MRIIRS.

Member American Society for Quality (ASQ).

Member Quality Council of India (QCI).

Member Quality Circle Forum of India (QCFI).

7. HONOURS AND AWARDS

Received Appreciation from VC MRIIRS for delivering enlightening session on ‘Awareness to ISO

9001:2015’ and Application of Six Sigma Methodologies during INNOSKILL-19.

Received Appreciation certificate from Dean MRIIRS for delivering expert talk on ‘Quality

management for Entrepreneurs’. (15 02 2019).

Received Appreciation certificate from Dean MRIIRS for Organizing International Conference as

Co-Convener (2017).

Received Cash award of Rs. 12,000 from MRIIRS for publishing quality research paper (2016).

Received merit award trophy from President Faridabad Industry Association (FIA) in TEI QC Quiz

Competition on Quality Concepts on March 5, 2016 organized by Quality Circle forum of India

(2016).

Received Appreciation certificate and Trophy from Dean, FET, and MRIIRS for coordinating

Annual Quality Conclave (2013).

Received Appreciation from Director SRCEM Palwal for Organizing National Conference as

Convener (2010).

Received Appreciation from Dr, Stya Paul, Founder Chairman, Apeejay Education Society for

authoring a book on manufacturing processes (2009).

Received Appreciation certificate from Director APJ College of Engineering for Organizing

National Conference as Convener (2008).

Received Merit Award for Application of Six Sigma Tools in Engineering College from APJ College

of Engineering (2006).

8. SERVICE ACTIVITIES (WITHIN AND OUTSIDE INSTITUTION)

a. Coordinator for ISO 9001:2015 Certification process of three units of MRIIRS namely Central Library,

CRCMC and Examination Cell 2019.

b. Deputy Superintendent End Semester Exams December 2019, Centre Superintendent End Semester

Exams December 2017, May 2018, July 2017.

c. Organized First International Conference of the department on Quality, Productivity, Reliability,

Optimization and Modelling as Co-Convener (2017) and received the funding of two lacs from DRDO

Govt. of India and DST Govt. of India.

d. Applied to Quality Council of India for Empanelment of MRIIRS as Training Organization partner -

ZED 30/06/2017.

e. Applied to Quality Council of India for Empanelment of MRIIRS as Organizing Partner for Industry

awareness program - ZED 15/05/2017.

f. Submitted the Proposal of Executive Development Plans 2019. Submitted Proposal for Corporate

Trainings and Consultancy Cell in Mechanical Engineering Department.

g. Class Coordinator 4MA and Vertical Mentor. Performing various other duties Including Admission

duty, Academic Audit Coordinator, NBA and NAAC Coordinator, Paper setter, Evaluation, IQAC

Coordinator etc.

h. Faculty Advisor ISTE, Faculty Advisor – Quality Management Consultancy Cell.

i. Organized an International Conference as Co-Convener on Quality, Productivity, Reliability,

Optimization, and Modeling (ICQPROM 2017) at Manav Rachna International University Campus

from January 5-7, 2017. The conference was technically sponsored by IEEE and supported by DST

and DRDO Govt. of India.

j. Organized and Coordinated Annual Quality Conclave at Manav Rachna International University in

November 12, 2013.

k. Organized a National Level Conference as Convenor at Shri Ram College of Engineering &

Management Palwal on “Trends & Advances in Mechanical Engineering” (TAME – 11) in March 2011.

l. Organized National level Conference as Convener at Apeejay College of Engineering on “Applications

of Mechanical Engineering for 21st Century” (AME 21C) in March 2008.

9. PUBLICATIONS

A. INTERNATIONAL JOURNALS

Improving Quality of Education using Six Sigma DMAIC Methodology: A Case Study of a Self-

Financed Technical Institution in India. International Journal of Quality Assurance in Engineering

and Technology Education (IJQAETE), 20154(2), 49-61.

Six Sigma: Literature Review and Implications for Future Research. International Journal of

Industrial Engineering, 2015 26(1).

Application of six sigma DMAIC methodology to reduce service resolution time in a service

organization. Accounting, 2015 1(1), 43-50.

Application of Six Sigma DMAIC Methodology for Reducing Defects in a Foundry Shop. Materials

Science Forum 2015 (Vol. 808, pp. 79-87).

Application of Attribute Gage Repeatability and Reproducibility (Gage R&R) Analysis to improve

Customer Queries and Complaint Process-A Case Study in a Service Organization, Journal of

Advanced Research in Industrial Engineering. 2015; 2(2): 12-16.

Significance of rational sub grouping of data for Interpreting X bar and R Charts-A Case Study in

a Service Organization, Journal of Advanced Research in Production Engineering 2015; 2(2): 63-

67.

Six Sigma and Pitfalls of TQM, YMCAUST International Journal of Research, Jan 2013; 1(1):88-94.

Effect of music on productivity of industrial workers engaged in repetitive work, International

Journal of research in aeronautical and mechanical engineering 2016;4(4):11-19.

Increasing Productivity by Reducing Cycle Time in Assembly line of an Automotive Industry using

Work Study Techniques. International Journal of Engineering Research & Technology (IJERT)

ISSN: 2278-0181 Vol. 5 Issue 02, February-2016

Quality Assurance of Screw Thread through ANOVA Analysis. International Journal of

Engineering and Technical Research (IJETR) ISSN: 2321-0869 (O) 2454-4698 (P), Volume-3, Issue-

10, October 2015

Relation between Metric and Whitworth Thread Through Regression Analysis. International

Journal of Engineering and Technical Research (IJETR) ISSN: 2321-0869 (O) 2454-4698 (P),

Volume-3, Issue-10, October 2015

B. CONFERENCES

Six Sigma for Service Organizations – Critical to Quality Characteristics (CTQs) and Challenges.

3rd International Conference on Production and Industrial Engineering, NIT Jalandhar,

India.2013 (pp. 1364-1373).

Critical Factors Affecting Successful Implementation of a Six Sigma Project. National Conference

on Advancements and Futuristic Trends in Mechanical Engineering, PEC University of

Technology, Chandigarh, India. 2014(pp.35-41).

Problem Solving Process in Automotive Industry – The Six Sigma Way, IEEE sponsored

International Conference on Quality, Productivity, Reliability, Optimization, and Modeling

(ICQPROM 2017), MRIU, Faridabad, January 5-7, 2017.

Role of Just in Time in Value Stream Mapping, IEEE sponsored International Conference on

Quality, Productivity, Reliability, Optimization, and Modeling (ICQPROM 2017), MRIU,

Faridabad, January 5-7, 2017.

Integration of Six Sigma And Lean Manufacturing, Proceedings of National Conference on Trends

and Advances in Mechanical Engineering (TAME)2006, YMCA Faridabad, December9-10(pp.

673-678)

Inner view of six sigma, National conference on ‘Emerging trends in manufacturing systems’ at

JMIT, Radaur, March 15-16,2005.

Critical factors affecting the successful implementation of JIT, National Conference on ‘Advances

in Manufacturing Technology’ at NITTTR, Chandigarh, November 9-11, 2005

C. BOOKS

Workshop/ Manufacturing Practices, AICTE ISBN 978-93-8-3992-42-3. (Katson Publications, New Delhi, first edition- 2019)

Workshop Calculations for Machine Tool Operators. ISBN 978-93-5014-553-1. (Katson Publications, New Delhi, first edition 2014)

Workshop Technology ISBN 978-93-5014-357-5. (Katson Publications, New Delhi, first edition-2012)

Manufacturing Processes. (Katson Publications, New Delhi, first edition- 2011) Manufacturing Processes ISBN 978-93-80027-04-3. (Katson Publications, New Delhi, first

edition- 2008) Manufacturing Processes ISBN 978-81-89757-56-4. (Katson Publications, New Delhi, first

edition- 2007)

10. PROFESSIONAL DEVELOPMENT ACTIVITIES

Reviewer of International Journal of Quality & Reliability Management, Emerald Publishing UK.

Reviewer of International Journal of International Journal of Quality Assurance in Engineering

and Technology Education, USA.

Reviewer of International Journal of Automotive and Mechanical Engineering (IJAME) Universiti

Malaysia.

Details of Training Programs Attended

S.No

Program Year Duration Organizing institution

1. Research in Modern

Era

01.06.2020-

05.05.2020

1 week J C Bose YMCAUST Faridabad

2. Outcome based

Education and

Accreditation

25.05.2020-

29.05.2020

1 week IILM College of Engineering and

Technology.

3. Refresher Course in

RAC

02.03.2020-

06.03.2020

1 week AICTE & ISHRAE

4. Workshop on

Industrial Safety:

Accident Prevention

10.08.2019 1 day IEI, Faridabad Local Chapter

5. Green Manufacturing 11.02.2019-

15.02.2019

1 week NITTTR Chandigarh, Ministry of

HRD, Govt. of India

6. ISO 9001: 2015 Lead

Auditor Training

27.11.2018 -

01.12.2018

1 week BSI, Delhi

S.No


7. Entrepreneurship and

Business Incubation

8.10.2018 -

12.10.2018


HRD, Govt. of India

8. Advanced

Manufacturing

Methods

05.03.2018 -

09.03.2018


HRD, Govt. of India

9. ZED Assessor

Training

19.02.2018-

23.02.2018

1 week Quality Council of India, Delhi

10. ZED Master Trainer

Training

20.02.2017 -

24.02.2017

1 week Quality Council of India, Delhi

11. SAP MM Training 02.05.2016-

14.05.2016

2 weeks SAP ACADEMY MRIIRS Faridabad

Campus

12. IPR Training 17.06.2015 1 day MRIIRS Faridabad Campus

13. Writing High Impact

Research Papers and

Proposals

16.05.2015 1 day MRIIRS Faridabad Campus

14. Holistic wellness for

faculty and academic

productivity

14.03.2015 1 day MRIIRS Faridabad Campus

15. Mission 10X Faculty

Development

Program

07.05.2012-

11.05.2012

1 week WIPRO Technologies

16. Quality Assurance

and NBA

Accreditation in

Technical Education

20.07.2009 -

24.07.2009


HRD, Govt. of India

17. ISO 9001: 2008 Lead

Auditor Training

24.12.2008 -

28.12.2008

1 week MSI, Noida

18. Six Sigma Black Belt

Training

August,

September,

October and

November 2007

4 weeks Indian Statistical Institute, Delhi

S.No


19. Six Sigma Green Belt

Training

22.11.2006-

24.11.2006

3 days Indian Statistical Institute, Delhi

20. CAD CAM Training 31.05.2004 -

04.06.2004


HRD, Govt. of India

21. CAD CAM Training 01.07.2002 -

12.07.2002

2 weeks SGSITS Indore

name : dr. virender narula 2. educationtraining mriirs mriirs campus faridabad 29/01/2019 11. iso...

Documents