nacera...new cubic 6y-psz high-performance ceramic from nacera’s multi-shade family relies on a...
TRANSCRIPT
-
Nacera | Catalog | 1PRODUCT CATALOG 2018
NACERAI N S I D ECAD CAM MATERIALS AND SUPPLIES
-
2 | Nacera | CAD CAM Materials and Supplies Nacera | CAD CAM Materials and Supplies | 3
Nacera® Zirconia Concept 08
Nacera® Indication Guide 10
Nacera® Pearl Q3 12 6Y-PSZ Ultra-High-Translucent
Nacera® Pearl Q3 Multi-Shade 13 6Y-PSZ Ultra-High-Translucent - Multilayered
Nacera® Color Guide 15, 17.
Nacera® Pearl Multi - Shade 16
3Y-TZP High-Translucent – Shaded
Nacera® Pearl Shaded 16 + 2 18
3Y-TZP High-Translucent – Shaded
Nacera® Pearl 1 20 3Y-TZP High-Translucent - White
Nacera® Shell 1 21 3Y-TZP-A Semi-Translucent - White
Nacera® Shell 2 / 3 21 3Y-TZP-A Semi-Translucent – Shaded
Nacera® Blanks Zirkonzahn* 95 22 3Y-TZP High-Translucent - White
Nacera® Blanks for Amann Girrbach** 23 3Y-TZP HighTranslucent - White 3Y-TZP-A Semi-Translucent - White
Nacera® Blanks DWX-4 23 3Y-TZP High-Translucent - White 3Y-TZP-A Semi-Translucent - White
Nacera® – SEE the difference 5
CONTENTFinishing Products
05
Nacera® ZirconiaRight the First Time. With Nacera® Inside.
02Nacera® by DOCERAM Medical Ceramics
01
Technical Data 44
Quick Guide - Zirconia Sintering 46
ceraMotion® OneTouch 42
* Zirkonzahn is a registered word/picture mark of Zirkonzahn GmbH, Gais (Italy)** Amann Girrbach is a registeredmark of Amann Girrbach AG, Koblach (Austria)
Nacera® HybridMake them Beautiful.
Nacera® SuppliesKnow greater Certainity.
03 04
Blocks and Discs 34
Debonding Study & Bonding protocol 36
Nacera® Blend 38
Nacera® Blue X 26
Nacera® Classic Liquid 27
Nacera® Clean 29
Nacera® Calibrate 30
Nacera® Shine Zr 31
NEW
-
Nacera | CAD CAM Materials and Supplies | 54 | Nacera | Catalog
01
See the Difference.
01
NACERA®
All ceramics are not created equal ... We know that achieving the most natural lookis paramount to you and your patients, and it’s critical to us, too. SEE the differencewith the highest levels of Strength, Esthetic and Expertise in the industry; it’s thethree legs of the Nacera core.
STRENGTH:Through our proprietary manufacturing and testing methods, we create the strongestdental ceramics possible so you and your patients can be certain to get thebest, every time.
ESTHETIC:You as a dental partner and your patients demanding the most natural-looking restorations and so do we. With Nacera, you get industry-leading beauty combined with industry-leading strength so patients feel confident that their teeth look as good as they feel.
EXPERTISE:Passionate about what they do, our team of technicians and engineers are experts at their craft, and every Nacera product is a testament to that. They are constantly striving to be the best, and that drive ensures you receive the best.
Those three elements are inside every Nacera product. They‘re our difference and,quite frankly, they‘re our customers’ difference. All ceramics are not created equal,and what‘s inside matters.
-
Nacera | CAD CAM Materials and Supplies | 76 | Nacera | Catalog
NACERA®ZIRCONIA
We don’t believe in do-overs; we believe in getting it right the first time, every time.But for some, product purity, consistently pressed pucks and stringent quality assur-ance have become the exception rather than the norm in our industry. Too often, labsand dentists have been forced to accept low-quality products. Many have defaultedto the lowest common denominator – not by choice, but out of necessity.
It doesn‘t have to be that way. It shouldn‘t be that way. Because every time a resto-ration gets sent back, that’s more time, more material and more money. And this isa business after all.
That‘s why we‘ve created a multi-step quality control process to ensure quality andconsistency. That‘s why we use only the highest quality pure zirconium oxide to cre-ate a powerful ceramic base that will outlast the toughest wear-and-tear and achievethe most natural-looking, enamel-like translucency.
That‘s why we‘ve built the industry‘s deepest team of technical experts to drive ourprocess and deliver our products. It‘s time to change the game. It‘s time bolster yourbottom line. It’s time to EXPECT MORE.
Right the First Time.With Nacera® Inside.
02
02
Nace
ra® Z
irco
nia
-
8 | Nacera | CAD CAM Materials and Supplies Nacera | CAD CAM Materials and Supplies | 9
Nacera® Zirconia Concept
Pre
shad
ed
Nace
ra® Z
irco
nia
TranslucencyStrength
Effi
cien
cy
On
e so
luti
on
fo
r al
l req
uir
emen
ts.
Wh
ite
Mu
ltila
yere
d
Shell 2 + 3
Shell 1
Pearl Multi-Shade
Pearl Shaded 16 + 2
Pearl 1 + Classic Liquid
Pearl Q3 Multi-Shade
Pearl Shaded 16 + 2 + Blue X*
Semi-Translucency High-Translucency Ultra-High-Translucency
Nace
ra® Z
irco
nia
* depending on the applied amount of Nacera Blue X
6Y-PSZ3Y-TZP3Y-TZP-A
32%
-
10 | Nacera | CAD CAM Materials and Supplies Nacera | CAD CAM Materials and Supplies | 11
The right choice of Zirconia and its indication is based on multi-requirements. With our Nacera® Indication Guide pick the optimal solution for your case. If the shade of the prepared tooth, material characteristics and the restorative indication match you will produce a durable and esthetically Zirconia solution – a Nacera® Solution.
Nacera® Indication Guide
Status Translucency/Type Nacera® Product
Prepared Tooth
Light - Bleached UHT Ultra-High-Translucent, Multilayered Pearl Q3 Multi-Shade
Medium - Slightly Discolored HT High-Translucent, Multilayered Pearl Multi-Shade
Medium - Slightly Discolored HT High-Translucent, Preshaded Pearl Shaded 16 + 2
Medium - Slightly Discolored HT High-Translucent, White Pearl 1
Dark - Strong Discolored/ Metal ST Semi-Translucent, White & Preshaded Shell 1–3
Status Translucency/Type Nacera® Product
Prepared Tooth
Light - Bleached UHT Ultra-High-Translucent, Multilayered Pearl Q3 Multi-Shade
Medium -Slightly Discolored HT High-Translucent, Multilayered Pearl Multi-Shade
Medium - Slightly Discolored HT High-Translucent, Preshaded Pearl Shaded 16 + 2
Medium - Slightly Discolored HT High-Translucent, White Pearl 1
Dark - Strong Discolored/ Metal ST Semi-Translucent, White & Preshaded Shell 1–3
Technique
Classic Liquid Dipping/Brush Use Blue X Monolithic/Staining Minimal Cut-back Layering
● ● ●
/● for accents ● ● ● ●
/● for accents ● ● ● ●
●/● ● ● ●
/ ●
Restauration
Inlay, Onlay, Veneer Crowns Bridge < 3 Units Bridge > 3 Units & Toronto Abutment Implant Crown Anterior & Posterior Anterior & Posterior with Interface with Interface
● ● ● ●
● ● ● ● ● ●
● ● ● ● ● ●
● ● ● ● ● ●
● ● ● ● ●
Recommended use of Nacera® Zirconiain relation to prepared tooth shade and degree of translucency
Nace
ra® Z
irco
nia
Nace
ra® Z
irco
nia
Te
ch
niq
ue
Re
st
au
ra
tio
n
Medium – Slightly Discolored
Nacera Shell Nacera Pearl Nacera Pearl Q3
Light – BleachedDark– Strong Discolored/Metal
Shade of the prepared tooth
Material
Opacity
Translucency
-
12 | Nacera | CAD CAM Materials and Supplies Nacera | CAD CAM Materials and Supplies | 13
Nacera® Pearl Q3 6Y-PSZ Ultra-High-Translucent - Multilayered
What‘s behind:
Naceras Experts developed Pearl Q3 based on the latest Zirconia generation. The 6Y-PSZ Zirconia has a cubic phase that significantly reduces birefringence compared to other Yttria stabilized Zirconia on the market. Light transmission and consequently the translucency has been drastically increased.
Birefringence is the physical property of optical materials that have two refractory indexes in different polarizationplaned and thus divide the light rays in two angles. In polycristals as machineable Zirconia, this lead to increasedscattering and opacity.
Nace
ra® Z
irco
nia
Nacera® Pearl Q3 Multi-Shade redefines the accuracy of color and fit of CAD/CAM restoration materials. The new high-yttrium-stabilised zirconium oxide series, is added to its proven Nacera Pearl Multi-Shade system, not only offers increased, ultra-high translucency, but also extremely natural light dynamics and color reproduction that precisely matches the Vita color system. The photo-optical properties of the new high-performance ceramic are achieved through a range of factors, including a special chemical com-position that results in a tetragonal-cubic phase. The resulting optimized light refraction greatly increases dispersion and radiance, helping ceramists more easily fabricate esthetic masterpieces in zirconia. Nacera® Pearl Q3 Multi-Shade now provides technicians with yet another premium material for esthetic, CAD/CAM-based dental prostheses – with ultra-high translucence, and precisely defined color accuracy. The new cubic 6Y-PSZ high-performance ceramic from Nacera’s Multi-Shade family relies on a new, proprietary color blending and calibration method to precisely measure and adjust color-dependent value and chroma. At the same time, the finely flowing color gradations from the tooth neck to the edge give the dental prostheses – either fully anatomical or anatomically reduced – a natural color character. These improvements make it easier for ceramists to predictably produce highly esthetic zirconium oxide restorations. Thanks to selective control of grain size and density, light transmission and translucency have been further increased.With a bending strength of 700 +/- 120 MPa, Nacera® Pearl Q3 Multi-Shade can be used not only to produce highly esthetic and durable monolithic single tooth restorations, but also three-segment bridges. Relying on best-in-class technology, dental technicians can now count on Nacera® Pearl Q3 Multi-Shade for modern CAD/CAM restoration material when highly esthetic restorations are required. Its natural color and translucency progression easily, reliably and efficiently – makes it a perfect addition to the Nacera system family.
Nacera® Pearl Q3 Multi-Shade
Nace
ra® Z
irco
nia
A2
A1
NEW 6Y-PSZ
* VITA is a registered mark of VITA Zahnfabrik H. Rauter GmbH & Co. KG, Bad Saeckingen (Germany)
6Y - PSZ60 % CUBIC | 40 % TETRAGONAL
LIGHT
3Y - TZP100% TETRAGONAL
LIGHT
BIREFRINGENCE
SIMPLE REFRACTION
SCATTERING
-
14 | Nacera | CAD CAM Materials and Supplies Nacera | CAD CAM Materials and Supplies | 15
Smooth, invisible transitions within the restoration
Nacera® Pearl Q3 Multi-Shade is a polychromatic, ultra-high-translucent zirconia with finely smoothing colorgradient and a perfect match of VITA* shades. A proprietary color blending method, taking for the first time intoaccount the color-dependent brightness value and chroma in a zirconium oxide system. The shade match and naturalappearance allows you to be most effective. Save time while finishing only with glaze or give quickly a furtherindividual character through adding accents with stains. Achieve easily a masterpiece while layering on a minimalcut back. Now it´s up to you. Try it and convince yourself!
Nacera® Pearl Q3 Multi-Shade 6Y-PSZ Ultra-High-Translucent - Multilayered
A light
A2
A1
Nacera Pearl Q3 Multi-ShadeMultilayered Zirconia
16 mm 20 mm
A-Light 3490300059 3490300060
A-Dark 3490300061 3490300062
B-Light 3491300060 3491300061
B-Dark 3491300062 3491300063
C-Light 3492300044 3492300045
C-Dark 3492300046 3492300047
Ite
m n
um
be
r
Nacera Pearl Q3 Shade
VITA* Shade
A-Light A1 - A2
A-Dark A3 - A3,5
B-Light B1 - B2
B-Dark B3 - B4
C-Light C1 - C2
Co
lor
Sh
ades
Benefits & Indication
● Revolutionary match of the VITA* shades and lifelike smooth color transitions● Make monolithic crowns and bridges up to 3 units, veneers, inlays, onlays● Finish in One-Bake, e.g. with ceraMotion® One Touch● Your ergonomic system to achieve the most common shades
Nacera® Color Guide Pearl Q3 Multi-Shade
6Y-PSZ
With our Nacera® Color Guide, you choose the best solution for your case. Depending on the height of the blanks and the shade you can see here the exact location of the restoration in the blank. So you will produce a perfect color match and an esthetically Zirconia solution – a Nacera® Solution.
6Y-PSZ
Nace
ra® Z
irco
nia
Nace
ra® Z
irco
nia
NEW
* VITA is a registered mark of VITA Zahnfabrik H. Rauter GmbH & Co. KG, Bad Saeckingen (Germany)
0 mm
0 mm
A-LIGHT
A-LIGHT
A1
A1
A2
A2
0 mm
A-DARK
A3
A3.5
0 mm
A-DARK
A3
A3.5
16 mm
4 mm
8 mm
12 mm
16 mm
4 mm
8 mm
12 mm
20 mm
5 mm
10 mm
15 mm
20 mm
5 mm
10 mm
15 mm
-
Nacera | CAD CAM Materials and Supplies | 1716 | Nacera | CAD CAM Materials and Supplies
The new Nacera® Pearl Multi-Shade milling blanks are nothing less than an economical and sophisticated systemfor creating full contour crowns. Available in the shades A, B, C, and D to achieve most common tooth colors. Theirapplication is quite simple: Depending on the height positioning of the crown, for example, the colors A3, A2 or A1can be attained in an A-Blank. The same is true for the other shades. The structural height of 18 mm ensures thatsufficient space for vertical shifting is available. Best of all, however, are the four finely-tuned color layers, whichalways provide smooth, invisible transitions within the restoration.Color Guide: Multi-Shade
Nacera® Pearl Multi-Shade 3Y-TZP High-Translucent - Multilayered
Benefits & Indication
● Natural highly translucent
Multilayered system● Lifelike and smooth transitions from
cervical to incisal● Extremely efficient: one blank covers
three shades● Quick and cost effective for natural-looking
monolithic restorations● 4 Point Bending Strength: 1200 MPa● Excellent Machinability: Thin margins can be
milled without having to worry about chipping or cracks.● Lifetime of milling burs increases up to 15 %
Smooth, invisible transitions within the restoration
Nacera Pearl Multi-ShadeMultilayered Zirconia
14 mm 18 mm 22 mm
A-Light 3290300022 3290300023 3290300024
A-Dark 3290300017 3290300018 3290300019
B-Light 3291300006 3291300007 3291300008
B-Dark 3291300001 3291300002 3291300003
C-Light 3292300003 3292300004 3292300005
C-Dark 3292300000 3292300001 3292300002
D-Light 3293300003 3293300004 3293300005
D-Dark 3293300000 3293300001 3293300002
Ite
m n
um
be
r
Nacera Pearl Multi-ShadeMultilayered Zirconia
14 mm 18 mm 22 mm
A 3290WN3094 3290WN3095 3290WN3099
B 3291WN3094 3291WN3095 3291WN3099
C 3292WN3094 3292WN3095 3292WN3099
D 3293WN3094 3293WN3095 3293WN3099
Ite
m n
um
be
r
3Y-TZP
Please note: For a smooth color gradient withhigh anterior teeth use 18 mm
Coming
Soon
Nace
ra® Z
irco
nia
Nace
ra® Z
irco
nia
A-LIGHT
A-LIGHT
A-LIGHT
A1
A1
A1
A2
A2
A2
0 mm
A-DARK
A-DARK
A-DARK
A3
A3
A3
A3.5
A3.5
A3.5
0 mm
0 mm
0 mm
0 mm
14 mm
18 mm
22 mm
3.5 mm
4.5 mm
5.5 mm
7 mm
9 mm
11 mm
10.5 mm
13.5 mm
16.5 mm
0 mm
14 mm
3.5 mm
7 mm
10.5 mm
18 mm
4.5 mm
9 mm
13.5 mm
22 mm
5.5 mm
11 mm
16.5 mm
-
18 | Nacera | CAD CAM Materials and Supplies Nacera | CAD CAM Materials and Supplies | 19
Nacera® Pearl Shaded is a German premium-product made of highly translucent zirconium oxide, that guaranteesnatural-looking restorations. The combination of extreme flexural strength (1200 MPa) and high translucency ismade for maximum esthetics.
The homogeneously shaded blanks are now available in 18 newly developed colors consistently matching the VITA*classical shade guide perfectly each time. Nacera® Pearl Shaded is not only frequently used for full contour Zirconiarestorations, but also provides a reliable basis for substructures in the layering technique. Our shaded blanksspeed up the production considerably while simultaneously increasing the esthetic quality of the results.
Nacera® Pearl Shaded 16 + 2 3Y-TZP High-Translucent - Preshaded
Benefits & Indication
● Perfect color match – each time, every time● Multiple indications – extreme flexural strength paired
with high translucency for all requirements● Shaded blanks increase reliability of production processes
and eliminate the danger of white spots during regrinding● Cost efficient – because no dipping and drying necessary● Excellent Machinability● Lifetime of milling burs increases up to 15 %● Naturaly esthetic for monolithic restauration
Nacera Pearl Shaded A1 - A4
12 mm 14 mm 16 mm 18 mm 20 mm 25 mm
A1 3262WN3093 3262WN3094 3262WN3913 3262WN3095 3262WN3096 3262WN3097
A2 3263WN3093 3263WN3094 3263WN3913 3263WN3095 3263WN3096 3263WN3097
A3 3264WN3093 3264WN3094 3264WN3913 3264WN3095 3264WN3096 3264WN3097
A3,5 3265WN3093 3265WN3094 3265WN3913 3265WN3095 3265WN3096 3265WN3097
A4 3266WN3093 3266WN3094 3266WN3913 3266WN3095 3266WN3096 3266WN3097
Ite
m n
um
be
r
All Nacera® zirconia products hold a marketability according to 93/42 EEC. FDA approved K-143071.* VITA is a registered mark of VITA Zahnfabrik H. Rauter GmbH & Co. KG, Bad Saeckingen (Germany)
3Y-TZP Nacera® Pearl Shaded 16 + 2 3Y-TZP High-Translucent - Preshaded
Nacera Pearl Shaded B1 – B4
12 mm 14 mm 16 mm 18 mm 20 mm 25 mm
B1 3267WN3093 3267WN3094 3267WN3913 3267WN3095 3267WN3096 3267WN3097
B2 3268WN3093 3268WN3094 3268WN3913 3268WN3095 3268WN3096 3268WN3097
B3 3269WN3093 3269WN3094 3269WN3913 3269WN3095 3269WN3096 3269WN3097
B4 3270WN3093 3270WN3094 3270WN3913 3270WN3095 3270WN3096 3270WN3097
Nacera Pearl Shaded C1 – C4
12 mm 14 mm 16 mm 18 mm 20 mm 25 mm
C1 3271WN3093 3271WN3094 3271WN3913 3271WN3095 3271WN3096 3271WN3097
C2 3272WN3093 3272WN3094 3272WN3913 3272WN3095 3272WN3096 3272WN3097
C3 3273WN3093 3273WN3094 3273WN3913 3273WN3095 3273WN3096 3273WN3097
C4 3274WN3093 3274WN3094 3274WN3913 3274WN3095 3274WN3096 3274WN3097
Nacera Pearl Shaded D2 – D4
12 mm 14 mm 16 mm 18 mm 20 mm 25 mm
D2 3275WN3093 3275WN3094 3275WN3913 3275WN3095 3275WN3096 3275WN3097
D3 3276WN3093 3276WN3094 3276WN3913 3276WN3095 3276WN3096 3276WN3097
D4 3277WN3093 3277WN3094 3277WN3913 3277WN3095 3277WN3096 3277WN3097
Nacera Pearl Shaded OM2 – OM3
12 mm 14 mm 16 mm 18 mm 20 mm 25 mm
OM2 3260WN3093 3260WN3094 3260WN3913 3260WN3095 3260WN3096 3260WN3097
OM3 3261WN3093 3261WN3094 3261WN3913 3261WN3095 3261WN3096 3261WN3097
Ite
m n
um
be
rIt
em
nu
mb
er
Ite
m n
um
be
rIt
em
nu
mb
er
3Y-TZP
Nace
ra® Z
irco
nia
Nace
ra® Z
irco
nia
-
Nacera | CAD CAM Materials and Supplies | 2120 | Nacera | CAD CAM Materials and Supplies
With Nacera® Pearl you receive a German premium material of highly translucent zirconium oxide for natural-looking restorations. Available in white, it provides the ideal basis for dental esthetics.
The blanks can be processed in most available milling machines and are characterized by their consistent color results and excellent machinability. Finished with a stain-and-glazing technique or using minimal stratification by Cut-Back, Nacera® Pearl is always a reliable quality foundation for monolithic crowns and bridges, as well as abutment and screw retained restorations.
Nacera® Pearl 1 3Y-TZP High-Translucent - White
Standard 98,3 without step on request!
Nacera Pearl 1, High-Translucent, Ø 98,3 mmwhite
10 mm 12 mm 14 mm 16 mm 18 mm 20 mm 22 mm 25 mm
3210WN3092 3210WN3093 3210WN3094 3210WN3913 3210WN3095 3210WN3096 3210WN3099 3210WN3097
Item
no.
Benefits & Indication
● Extremely high-precision fitting thanks to Instant Fit
Process (I.F.P).● Extremely low hydrothermal aging for a long lifetime● High strength of 1200 MPa for high stable implant
sub-structures● Excellent machinability for high precision milling
results● Covering discolored stumps and metal abutments to
achieve high esthetic veneerings
Nacera® Shell white is a reliable material suitable for all open CAD/CAM systems. The validated manufacturing process ensures that the material properties of the blanks remain uniform throughout.
Standard 98,3 without step on request!
Nacera® Shell 1 3Y-TZP-A Semi-Translucent - White
Nacera Shell 1, Semi-Translucent, Ø 98,3 mmwhite
10 mm 12 mm 14 mm 16 mm 18 mm 20 mm 22 mm 25 mm
3110WN3092 3110WN3093 3110WN3094 3110WN3913 3110WN3095 3110WN3096 3110WN3099 3110WN3097
Item
no.
3Y-TZP 3Y-TZP-A
32%
Nacera® Shell 2/3 3Y-TZP-A Semi-Translucent - Preshaded
Nacera Pearl 2, Semi-Translucent, Ø 98,3 mm preshaded
10 mm 12 mm 14 mm 16 mm 18 mm 20 mm 25 mm
3120WN3092 3120WN3093 3120WN3094 3120WN3913 3120WN3095 3120WN3096 3120WN3097
Item
no.
Nacera Pearl 3, Semi-Translucent, Ø 98,3 mm preshaded
10 mm 12 mm 14 mm 16 mm 18 mm 20 mm 25 mm
3130WN3092 3130WN3093 3130WN3094 3130WN3913 3130WN3095 3130WN3096 3130WN3097
Item
no.
Standard 98,3 without step on request!
3Y-TZP-A
32%
Nace
ra® Z
irco
nia
Nace
ra® Z
irco
nia
-
22 | Nacera | CAD CAM Materials and Supplies Nacera | CAD CAM Materials and Supplies | 23
Nacera® Blanks 3Y-TZP High-Translucent - White & 3Y-TZP-A Semi-Translucent - Whitefor Roland DWX-4
Nacera Shell 1, Semi-Translucentwhite
75,5 x 40 x 16 mm 75,5 x 40 x 22 mm
3110WN8788 3110WN8787
Item
no.
Nacera Pearl 1, High-Translucentwhite
75,5 x 40 x 16 mm 75,5 x 40 x 22 mm
3210WN8788 3210WN8787
Item
no.
Nacera Pearl 1 white
Structural height Item number
14 mm 3210-WNB-9094
16 mm 3210-WNB-9913
18 mm 3210-WNB-9095
20 mm 3210-WNB-9096
25 mm 3210-WNB-9097
Nacera Shell 1 white
Structural height Item number
14 mm 3110-WNB-9094
16 mm 3110-WNB-9913
20 mm 3110-WNB-9096
Products > Nacera® Blanks for Amann Girrbach** CAD/CAM systems
Products > Nacera® Blanks for Roland DWX-4 > opaque / translucent
Translucent
11
90 mm
72,5
mm
** Amann Girrbach is a registered mark of Amann Girrbach AG, Koblach (Austria)
75,5 mm
40 m
m
16 / 22 mm
Translucent
Nacera Shell 1 white
Block sizes Item number
75,5 x 40 x 16 mm 3110-WN-8788
75,5 x 40 x 22 mm 3110-WN-8787
Nacera Pearl 1 white
Block sizes Item number
75,5 x 40 x 16 mm 3210-WN-8788
75,5 x 40 x 22 mm 3210-WN-8787
Opaque
Opaque
Nacera® Blanks 3Y-TZP High-Translucent - White for Amann Girrbach* & 3Y-TZP-A Semi-Translucent - White
Nacera Shell 1, Semi-Translucentwhite
12 mm 14 mm 16 mm 18 mm 20 mm 25 mm
3110WNB9093 3110WNB9094 3110WNB9913 3110WNB9095 3110WNB9096 3110WNB9097
Item
no.
Nacera Pearl 1, High-Translucentwhite
12 mm 14 mm 16 mm 18 mm 20 mm 25 mm
3210WNB9093 3210WNB9094 3210WNB9913 3210WNB9095 3210WNB9096 3210WNB9097
Item
no.
* Amann Girrbach is a registered mark of Amann Girrbach AG, Koblach (Austria)
Nacera Pearl 1 white
Structural height Item number
14 mm 3210-WNB-9094
16 mm 3210-WNB-9913
18 mm 3210-WNB-9095
20 mm 3210-WNB-9096
25 mm 3210-WNB-9097
Nacera Shell 1 white
Structural height Item number
14 mm 3110-WNB-9094
16 mm 3110-WNB-9913
20 mm 3110-WNB-9096
Products > Nacera® Blanks for Amann Girrbach** CAD/CAM systems
Products > Nacera® Blanks for Roland DWX-4 > opaque / translucent
Translucent
11
90 mm
72,5
mm
** Amann Girrbach is a registered mark of Amann Girrbach AG, Koblach (Austria)
75,5 mm
40 m
m
16 / 22 mm
Translucent
Nacera Shell 1 white
Block sizes Item number
75,5 x 40 x 16 mm 3110-WN-8788
75,5 x 40 x 22 mm 3110-WN-8787
Nacera Pearl 1 white
Block sizes Item number
75,5 x 40 x 16 mm 3210-WN-8788
75,5 x 40 x 22 mm 3210-WN-8787
Opaque
Opaque
3Y-TZP
* Zirkonzahn is a registered word/picture mark of Zirkonzahn GmbH, Gais (Italy)
Products > Nacera® Blanks Zirkonzahn* 95 > translucent
Other sizes or colors on request .
TranslucentNacera Pearl 1, white blanks Ø 95 mm
Structural height Item number
10 mm 3210-WN-2092
12 mm 3210-WN-2093
14 mm 3210-WN-2094
16 mm 3210-WN-2913
18 mm 3210-WN-2095
22 mm 3210-WN-2099
25 mm 3210-WN-2097
10
Ø 95 mm
* Zirkonzahn is a registered word/picture mark of Zirkonzahn GmbH, Gais (Italy)
Nacera® Blanks Zirkonzahn* 3Y-TZP High-Translucent - White
Nacera Pearl 1, High-Translucent, Ø 95mmwhite
10 mm 12 mm 14 mm 16 mm 18 mm 20 mm 22 mm 25 mm
3210WN2092 3210WN2093 3210WN2094 3210WN2913 3210WN2095 3210WN2096 3210WN2099 3210WN2097
Item
no.
Other sizes or colors on request!
Nace
ra® Z
irco
nia
Nace
ra® Z
irco
nia
-
Nacera | CAD CAM Materials and Supplies | 2524 | Nacera | Catalog
NACERA®SUPPLIES
03
Nacera® is a dental ceramics company, but really we‘re in the business of certainty.At a time when far too many products and partners can‘t be counted on, we consistently deliver the highest quality ceramics and the highest-touch service to our partners. They depend on it. We demand it of ourselves. We‘ve built our business on that promise, and many of our partners have built their businesses on it, too. Because with Nacera® our partners know what to expect. In fact they‘re certain on it.
With more than twenty years of manufacturing excellence, we have a proven track record of consistently delivering the highest quality of the industry ceramics. Our team of expert engineers meticulously craft each Nacera® ceramic using our proprietary restorations to ensure the strongest, purest, and most natural-looking material every time, no exceptions.
The technical expertise is provided by a team of highly skilled experts with the technical know-how to deliver solutions. They know how to deliver greater quality. They know greater service. They know greater certainty.
You can do it, too. Based on our experience we put together a selection of Nacera®
Supplies: Products and tools to support and prove your process. To achieve best results.To achieve best quality. To achieve Nacera®.
Know greater certainty.
03 Nacer
a® S
upplies
-
26 | Nacera | CAD CAM Materials and Supplies Nacera | CAD CAM Materials and Supplies | 27
We have surpassed Cubic Zirconia in the desire for a strong, but highly translucent zirconium oxide. NacerasBlue X, applied to Nacera® Pearl 3Y-TZP Zirconia, exceeds the esthetic properties of lithium disilicate by allowingtechnicians to brush into place the right amount of translucency only where desired. The translucency will increaseup to 8 % on Nacera® Zirconia. The advantages continue with improvements in strength. Nacera® Pearl Zirconiatreated with Blue X has still a flexural strength of 1.200 MPa 4-Point Bending Strength: Almost double Cubic Zirconia,and up to 3x that of lithium disilicate!
Blue X is especially developed for Nacera® Pearl Shaded Zirconia. It will lower the Chroma when applied to Incisal orOcclusal areas and generates a lifelike color transition – for a brushed Multilayer effect! The concept realized by„Blue X“ is a world first — made in Germany by DOCERAM Medical Ceramics.
Nacera® Blue X – Translucent Liquid
Benefits & Indication● Flexible. Cusp tips and incisal edges – use where
desired● Certain. Raise translucency and keep „full
strength“● Innovative. Apply translucency and color transi-
tion in one stroke● Efficient. Anterior Esthetics at Half cost – no
additional Cubic Zirconia inventory necessary
INNOVATION
Nacera Blue X15g Item number
4000LQ8030Contains: ● Brush● Watchglass● Manual
Nace
ra® S
upplies
Nacera® Pearl treated with Nacera® Blue Xtested according ISO 6872 can achieve:
Applying Nacera Blue X
Sintering
Finishing
+8% more Translucency with Nacera Blue X
4- Point Bending Strength 1200 MPa (± 200 MPa)
Fracture Toughness > 9 MPa√m
Translucency + 4 % Thickness 1,5 mm + 6 % Thickness 1,0 mm + 8 % Thickness 0,5 mm
Naceras Classic Liquid – a brand new Shading Liquid Concept for perfect lifelike shade results especially in combination with white Nacera® Zirconia.
Focused on the essence – Nacera® Classic Liquids are available in 16 body colors and various effect stains coveringthe entire chromatic spectrum and guaranteeing flexible and individual customization of Nacera® Zirconia resto-rations. Finer details, such as mamelons, cervical and interproximal accents can be performed easily with pinpointprecision. The liquids can be applied directly by brush or by using the dipping technique. Nacera® Classic Liquid isspecially developed for Nacera® Pearl Zirconia to provide maximum shade consistency, esthetics and efficiency.
Nacera® Classic Liquid
Benefits & Indication
● Stable. Infiltrates deeply into Zirconia to reduce white spots from grinding● Flexible. Use dipping- or brushing technique● Ready to Use. No mixing required– just start● Clear. Focused on the essence for a logical handling● Complete. Perfect color match. Every time for the entire VITA* shade range
Nace
ra® S
upplies
* VITA is a registered mark of VITA Zahnfabrik H. Rauter GmbH & Co. KG, Bad Saeckingen (Germany)
Nacera Classic LiquidSet Item number
4000LQ7116The set contains 23 bottles: ● 16 x 50ml Body● 2 x 20 ml Enamel● 4 x 20 ml Effect● 1 x 50 ml Diluting
and also:
● 1 x Brush● 1 x Timer● 1 x Funnel● 1 x Tweezer
-
28 | Nacera | CAD CAM Materials and Supplies Nacera | CAD CAM Materials and Supplies | 29
Nacera Classic Liquid - Body A1 - A4
50 ml 100 ml
A1 4000LQ7050 4000LQ7100
A2 4000LQ7051 4000LQ7101
A3 4000LQ7052 4000LQ7102
A3,5 4000LQ7053 4000LQ7103
A4 4000LQ7054 4000LQ7104
Nacera Classic Liquid - Body C1 - C4
50 ml 100 ml
C1 4000LQ7059 4000LQ7109
C2 4000LQ7060 4000LQ7110
C3 4000LQ7061 4000LQ7111
C4 4000LQ7062 4000LQ7112
Nacera Classic Liquid - Diluting
50 ml
Diluting 4000LQ7066
Nacera Classic Liquid - Balancer
20 ml
Balancer 4000LQ8036
Nacera Classic Liquid - Body B1 - B4
50 ml 100 ml
B1 4000LQ7055 4000LQ7105
B2 4000LQ7056 4000LQ7106
B3 4000LQ7057 4000LQ7107
B4 4000LQ7058 4000LQ7108
Nacera Classic Liquid - Body D2 - D4
50 ml 100 ml
D2 4000LQ7063 4000LQ7113
D3 4000LQ7064 4000LQ7114
D4 4000LQ7065 4000LQ7115
Nacera® Classic Liquid
Nacera Classic Liquid - Enamel
20 ml
Enamel I 4000LQ8020
Enamel II 4000LQ8021
Nacera Classic Liquid - Effect
20 ml
Effect Blue 4000LQ8027
Effect Grey 4000LQ8031
Effect Brown 4000LQ8033
Effect Orange 4000LQ8037
Item
nu
mber
Item
nu
mber
Item
nu
mber
Item
nu
mber
Item
nu
mber
Item
no.
Item
no.
Item
no.
Nacera® Clean is a cleaning powder for the combustion chamber of the sintering furnace. Damage from colorsolvents on heating rods and sediments in the combustion chamber cause discoloration or contamination of thesintering objects. In its initial application, the reactive Nacera® Clean takes these impurities from the furnace atmosphere, absorbs them, and cleans the oven permanently. Regular use provides genuine, color-consistent sintering results, impedes re-deposits in the combustion chamber, and protects the life of heating rods.
For basic cleaning we recommend the Starter Kit, which contains 200g. To keep the sintering furnace clean, usethe bundle packages of 30 g regularily at least once a week.
Nacera® Clean Oven Cleaner. Be on the bright side!
Perfect sintering results with Nacera® Clean
Discolorations without Nacera® Clean
Benefits & Indication
● No yellowish or greenish discoloration● No contamination on the zirconia-surface● Absorbs the color liquid sediments from
the firing chamber● High Translucency – pure and reliable
sintering results
Nacera® Clean Starter Kit Item number
3000RP0001Contains: ● 1 x 200 g
Nacera® Clean Bundle Item number
3000RP0003Contains: ● 1 x 200 g● 4 x 30 g
Nace
ra® S
upplies
Nace
ra® S
upplies
-
30 | Nacera | CAD CAM Materials and Supplies Nacera | CAD CAM Materials and Supplies | 31
Benefits & Indication
● Measure and set the correct temperature of your furnaces● Sinter your Zirconia right – every time● Be certain to get best strength and translucency● Use Nacera Calibrate to record to proof correct firing cycles for large restorations, e.g. Toronto-Bridge
This is an easy-to-use calibration set for your furnaces. It contains a measuring unit and ceramic temperaturecontrol rings.
Since the ceramic rings shrink proportionally to the input thermal energy during the sintering or firing process,the achieved furnace temperature is subsequently precisely determined with a dial gauge. If deviations from therequired or programmed temperature are detected, the sintering or firing furnace can be readjusted accordingly.Nacera® Calibrate controls the correct sintering and firing temperature for a perfect translucency, strength and trueshade. Most important your reproducibility of perfect ceramic results – every time.
Nacera® Calibrate – Don´t keep cool!Precise temperature control for perfect sintering results
Nacera® Calibrate
Nacera® Calibrate Set Acrylic tray with 15 calibration rings, reference ring, and dial gauge 5000300256
Calibration rings for sintering furnaces - 15 pcs. 5000300254
Item
no.
NEW
Nacera® Shine Zr is a diamond polishing paste to achieve a long-lasting high-quality shine on zirconium oxide.It contains a very high diamond content and an exceptionally hard consistency – for less work and a glossier finish.
Nacera® Shine Zr can be used for pre-polishing with standard hard brushes or for high-gloss polishing with goathair brushes, cotton or leather buffing wheels. Its exceptionally hard consistency and a special wax/acid mixturethat acts as a binding and adhesive agent that ensures that the polishing tool only takes up the quantity required forthe particular operation. This avoids any spraying or smearing of excess material, which in turn results in greaterefficiency and cleanliness during processing of zirconium oxide and reduced consumption of high quality diamondpaste.
Nacera® Shine Zr polishing paste
Benefits & Indication
● High gloss finish of the full-ceramic restoration in 90 seconds● Long-lasting high-quality shine on zirconium oxide● Very high diamond content and an exceptionally hard consistency – for less work and a glossier finish● Easy to handle● Efficient in terms of consumption● Effective and time-saving to use
Nacera® Shine Zr14 g Item number
5001300243
Nacera® Shine Edition14 g Item number
5000300244also contains: ● Acrylic holder● 2 Polishing brushes
Nace
ra® S
upplies
Nace
ra® S
upplies
NEW
-
Nacera | CAD CAM Materials and Supplies | 3332 | Nacera | Catalog
NACERA®HYBRID
04
High Performance Hybrid Ceramic for permanent restorations.
Nacera® Hybrid is the new CAD/CAM material for chairside or labside milling machines.It is a high performance hybrid ceramic that can be used for esthetic longtermtemporaries or permanent restorations. Since Nacera® Hybrid is like the finestceramics, it perfectly replicates precise shade matching with a unique translucencyand chameleon effect for a lifelike appearance of natural teeth.
Nacera® Hybrid comes in Blocks and Discs which can be processed according to yourrequirements: You create crowns, bridges up to 3 units and inlays, onlays and veneerssince there is no firing process required. Yes: You will gonna be fast and efficient– with Nacera® Hybrid.
Make Them Beautiful.With Nacera® Hybrid.
04 Nace
ra® H
ybri
d
NEW
-
34 | Nacera | CAD CAM Materials and Supplies
50 % NANO-GLASS meets 50 % POLYMER-MATRIX
The outstanding mechanical properties of Nacera® Hybrid are the result of controlled, stress-free thermal curing.The composition of nano-glass and reinforcing polymer- matrix make Nacera® Hybrid the ideal material for per-manent restorations. The 100 % sinalized glass is permanently integrated into the polymer-matrix for a long shine and discoloration free restoration.
SHOCK-ABSORBER
The modulus of elasticity reduces stress peaks during chewing, resulting in decreased risk of material fatigue orfractures. Due to its shock-absorbing effect, it is the right choice for implant restorations and provides a pleasantbite-feeling.
SIMPLY NATURAL Esthetic
Nacera® Hybrid blends in extremely well and conveys natural esthetics – a broad spectrum of shades in the anteriorand posterior regions. After machining Nacera® Hybrid shows an extremely homogeneous surface structure.The restoration can therefore be polished to a high gloss very quickly. Plus: Easy repolishing, for example duringprophylaxis, is possible at any time if required.
Benefits & Indication
● Lifelike esthetic characteristics● No firing process required● Quick and exceptional grinding at a high precision● Effortless polishing for fast shine● Can be modified and repaired with conventional composites● Biomimetics: biomechanical strength is restored
BLOCKS AND DISCS
Nace
ra® H
ybri
d Nacera Hybrid
18 x 14.7 x 14.7mm
NACERA Hybrid A1 4501300001
NACERA Hybrid A2 4502300000
NACERA Hybrid A3 4503300003
NACERA Hybrid B1 4601300000
NACERA Hybrid Bleach 2 4620300000
NACERA Hybrid Bleach 3.5 4635300003
NACERA Hybrid C2 4702300003
NACERA Hybrid D2 4802300003
15 x 98mm
NACERA Hybrid A1 4501300002
NACERA Hybrid A2 4502300001
NACERA Hybrid A3 4503300000
NACERA Hybrid B1 4601300001
NACERA Hybrid Bleach 2 4620300001
NACERA Hybrid Bleach 3.5 4635300000
NACERA Hybrid C2 4702300000
NACERA Hybrid D2 4802300000
20 x 98mm
NACERA Hybrid A1 4501300003
NACERA Hybrid A2 4502300002
NACERA Hybrid A3 4503300001
NACERA Hybrid B1 4601300002
NACERA Hybrid Bleach 2 4620300002
NACERA Hybrid Bleach 3.5 4635300001
NACERA Hybrid C2 4702300001
NACERA Hybrid D2 4802300001
38,8 x 18,9 x 15,5mm
NACERA Hybrid A1 4501300004
NACERA Hybrid A2 4502300003
NACERA Hybrid A3 4503300002
NACERA Hybrid B1 4601300003
NACERA Hybrid Bleach 2 4620300003
NACERA Hybrid Bleach 3.5 4635300002
NACERA Hybrid C2 4702300002
NACERA Hybrid D2 4802300002
Nacera | CAD CAM Materials and Supplies | 35
DIS
CB
LO
CK
M
BL
OC
K S
Nace
ra® H
ybri
d Nacera
Hybrid
High Translucent Shades: A1, A2, A3, B1, C2, D2, BL2, BL3,5
Indication: Anterior and Posterior Region, bridge up to 3 units, crown, inlay, onlay, veneer
NEW
-
36 | Nacera | CAD CAM Materials and Supplies
Debonding Study & Bonding protocol
Nace
ra® H
ybri
d Nacera Hybrid
DEBONDING STUDY
Results of the Mowafy et al. EvaluationThe Mowafy et al. grading scale (see chapter 3.3.2) was used at 16 measurement points per specimen and
thus at a total of 80 measurement points per test group (n=5) for assessing dye penetration. Each measurement
point was given a score on the scale (0-4).
The results are shown in table 5.1.
Cerasmart CC
Cerasmart LC
Nacera Hybrid CC
Nacera Hybrid LC
27 15 11 10 17
76 4 0 0 0
16 56 80 0 0
57 23 0 0 0
0 1 2 3 4
0 3
1 4
2
No leakage
Leakage penetrates to the lower third of the die height (axial wall)
Leakage penetrates to the lower third of the die height
Leakage affects the entire die height
Leakage penetrates to the occlusal surface of the die
0
10
20
30
40
50
60
70
80Figure 5.1
Nu
mb
er o
f al
l mea
sure
men
t p
oin
ts [
n]
Cerasmart CC Cerasmart LC NaceraHybrid CC
NaceraHybrid LC
The bar chart in figure 5.1 depicts the results of table 5.1. The number of measuring points of therespective test group is shown on the y-axis. On the x-axis, the four test groups are each according to the values of the scale according to Mowafy et al. shown divided.
Nacera | CAD CAM Materials and Supplies | 37
Nace
ra® H
ybri
d Nacera
Hybrid
0
10
20
30
40
50
60
70Figure 5.2
Cerasmart CC Cerasmart LC NaceraHybrid CC
NaceraHybrid LC
Nu
mb
er o
f al
l mea
sure
men
t p
oin
ts [
n]
In order to better illustrate the degree of marginal leakage, figure 5.2 shows only those measurement points which indicated leakage. The measurement points with a value of 0 on the Mowafy scale – those with an intact marginal seal – were not included.
BONDING PROTOCOL
When using the following products, an optimum marginal integrity was successfully proven through a debonding study:
Step 1: Restoration debonding agent GC G-Multi Primer
Step 2: Adhesive GC G-Premio Bond (Light-curing)
Step 3: Bonding composite GC G-Cem Link Force (Light-curing)
Step 4: Preparation and polishing Fine-grain diamonds, composite polishers, goat hair brushes and cotton buffing wheels with GC DiaPolisher.Test groups
Test groups
0 = no leakage1 = leakage penetrates to the lower third of the die height (axial wall)2 = leakage penetrates to the lower third of the die height
3 = leakage affects the entire die height4 = leakage penetrates to the occlusal surface of the die
2 = leakage penetrates to the lower third of the die height1 = leakage penetrates to the lower third of the die height (axial wall)
4 = leakage penetrates to the occlusal surface of the die3 = leakage affects the entire die height
-
38 | Nacera | CAD CAM Materials and Supplies Nacera | CAD CAM Materials and Supplies | 39
Nace
ra® B
len
d
Nacera®
Blend Composite System
Nacera® Blend Tissue:
With our four new, Nacera® Blend Tissue flow composites, it is possible to complete Nacera® Hybrid
directly from the syringe with pink esthetics an tailor-made characterizations, for lab- and chairside. The gingival
flow materials are also suitable for subequent corrections, remodeling of gingiva shields, relining provisional and
and fo definitve implant work following a loss of soft or hard tissue. Create something new using the tension
between red and white esthetic.available Q1/18
Nacera® Blend is a light-curing veneering composite - in a modular system. Thanks to three modules, the user canindividually compile an efficient composite systemaccording to his requirements. Nacera® Blend provides allpossibilities for the characterization of hybrid and polymer works from quick and easy to detailed and fine-tuned.
Tissue Flow
Tissue light 3 g syringe
Tissue medium light 3 g syringe
Tissue medium dark 3 g syringe
Tissue dark 3 g syringe
Conte
nt
Stains Flow
Brown 1 g syringe
Red 1 g syringe
Blue 1 g syringe
White 1 g syringe
Bond AV 7 ml bottle
Modelling LQ 5 ml bottle
Mixing Pad 60 x 38 mm
Conte
nt
Nace
ra® B
len
d
Nacera® Blend Character:
Are six light - curing stains and two enamel - flows on a composite basis for the characterization of Nacera® Blend Tissue and Nacera® Hybrid as well as for composite veneers in crowns and bridge technology. With Nacera® Blend Character just with a few steps an individual and lively esthetic is made.
available Q2/18
Nacera®
Blend Composite System
Nacera® Blend Glaze:
Blend Glaze is a light - curing and scratch - resistant glaze and individualizing laquer. For efficient finalization of Nacera® Hybrid and Nacera® Blend Tissue and Character. The two different viscous sealing laquers can be combined and hardened in one application with the seven accent colors. After milling monolithic crownsand bridges characterized and lifelike in one step.
available Q2/18
Stains Flow
Yellow 1 g syringe
Orange 1 g syringe
Khaki 1 g syringe
Violett 1 g syringe
Grey 1 g syringe
White 1 g syringe
Conte
nt
Enamel Flow
Enamel I 3 g syringe
Enamel II 3 g syringe
Bonding AV 7 ml bottle
Modelling LG 5 ml bottle
Conte
nt
Conte
nt
Coming
Soon
Glaze
Clear LV 10 ml bottle
Clear HV 10 ml bottle
Body A 2,5 ml bottle
Body B 2,5 ml bottle
Body C 2,5 ml bottle
Khaki 2,5 ml bottle
Violett 2,5 ml bottle
Orange 2,5 ml bottle
White 2,5 ml bottle
Cleaner 50 ml bottle
Microbrushes
-
Nacera | CAD CAM Materials and Supplies | 4140 | Nacera | Catalog
NACERA®FINISHING PRODUCTS
05
There is a steady increase in the demand for all-ceramic restorations. Bridges andcrowns made from this material not only promise retention for a longer period oftime, but they also lend a natural appearance, are chemically stable and are toleratedwell. They offer everything that is expected of modern restorations. There is also anincrease in demand for materials which require less time for processing whilst main-taining a high demand on esthetics.
Our answer: the ceraMotion® One Touch Concept.
ceraMotion® One Touch was especially developed for esthetic, fully-anatomicalrestorations. Nacera® Pearl Zirconia and ceraMotion® One Touch pastes togetherform the core products of the ceraMotion® One Touch concept.
ceraMotion® One Touch are 2D and 3D pastes that have been specially developedfor the finish and characterization of all-ceramic, monolithic restorations made ofzirconium oxide and lithium silicate.
Never before has it been easier for you to manufacture esthetic crowns and bridgesin such a short time.
ceraMotion® One Touch.
05
Nace
ra® F
inis
hin
g P
rodu
cts
-
42 | Nacera | CAD CAM Materials and Supplies Nacera | CAD CAM Materials and Supplies | 43
What is ceraMotion® One Touch?The ceraMotion® One Touch pastes are manufactured using a special high-tech process. The particle size of thepastes have been adapted to suit the requirements for the staining technique (2D) and to offer the possibility ofcreating an individual morphology in the incisal area and in the occlusal surface area (3D).
The new consistency of the pastes allows a homogenous wetting of all-ceramic object surfaces. The thixotropiceffect produces perfect surface integrity and enables minimal layering.
All of the ceraMotion® One Touch pastes are translucent, thereby retaining the light dynamic effect of the frameworkmaterial. They give the fully anatomical restorations a natural fluorescence.
ceraMotion® One Touch
Nace
ra® F
inis
hin
g P
rodu
cts
Benefits & Indication
● Fast and easy handling thanks to ready-mixed ceramic pastes.● Set specially assorted for the easy finishing of esthetic, fully
anatomical restorations.● Maximum esthetics thanks to color-coordinated pastes with 3D
effect.● Small changes in shape and the adding of contact points are
possible.
The set contains all of the ceraMotion® One Touch individual components, with the exception of the display.All parts of the set are also available individually.
One Touch
ceraMotion® One Touch
Nace
ra® F
inis
hin
g P
rodu
cts
ceraMotion® One Touch - 2D3 g
Body A Body B Body C Body D white grey honey blue violet
25030603 25030703 25030803 25030903 25031003 25031103 25031203 25031303 25031403
Item
no.
ceraMotion® One Touch - 3D 3 g
12 lumin neutral opal blue opal grey opal honey
25030003 25030103 25030203 25030303 25030403 25030503
Item
no.
Item
nu
mber
ceraMotion®
One Touch Zr Glasur One Touch Pinsel
Set 25080070
Paste Glaze 25080070
2D Brush 25080070
3D Brush 25080070
Display (without pastes) 25080070
Diluting Liquid 25080070
One Touch Display
One Touch Liquid
-
44 | Nacera | CAD CAM Materials and Supplies Nacera | CAD CAM Materials and Supplies | 45
Tech
nic
al D
ata
Flexural Strength
4-point bending strength (MPa) DIN EN ISO 6872. The higher the flexural strength of zirconia (ZrO2) the better the stability under masticatory loading.
200 400 600 800 1000 12000
3Y -TZP-A
3Y -TZP
3Y -TZP+
6Y -TZP
3 U
nit
Bri
dges
1.200
1.200
1.200 + - 200
600
3 U
nit
Bri
dges
Class 5 > 800 MPa according to DIN EN ISO 6872*
Class 4 < 500 MPa according to DIN EN ISO 6872**
Nacera Shell
Nacera Pearl
Nacera Pearl + Blue X
Nacera Pearl Q3
Technical DataNacera® Zirconia
Translucency
The higher the translucency the more permeable the material is to light. (Less Opacity)
Nacera Pearl 1 + Classic Liquid
A3
Nacera PearlShaded
A3
Nacera Pearl Q3 Multi-Shade
A3
Opacity Translucency
White+10 %
SampleThickness
1.0 18 %82 % 28 %
1.5 89 % 11 % 21 %
0.5 69 % 31 % 41 %
1.0 80 % 20 % 30 %
1.5 86 % 14 % 24 %
0.5 66 % 34 % 44 %
1.0 74 % 26 % 36 %
1.5 79 % 21 % 31 %
0.5 59 % 41 % 51 %
Source: DOCERAM Medical Ceramics R+D
Tech
nic
al D
ata
100 200 300 400 5000
Empress CAD
Vita Mark II
Paradigm MZ100
IPS e.max CAD
Lava Ultimate
Nacera Hybrid
Weak Strong
Compressive Strength (MPa)
20 40 60 800
IPS e.max CAD
IPS Empress CAD
Vita Mark II
Vita Enamic
Natural Dentin
3M Lava Ultimate
Nacera Hybrid
Elastic Rigid
Modulus of Elasticity (GPa)
2.0 4.0 6.0 8.00
IPS Empress CAD
Vita Mark II
Natural Enamel
Vita Enamic
3M Lava Ultimate
Natural Dentin
Nacera Hybrid
Softer Harder
Vickers Hardness (GPa)
Technical DataNacera® Hybrid
Source: DOCERAM Medical Ceramics R+D
Technical Data Nacera® Hybrid
Characteristic Value +/– 10 %
Vickers Hardness (GPa) 700 MPa
Modulus of Elasticity (GPa) 9900 MPa
Compressive Strength (MPa) 490 MPa
Flexural Strength 175 MPa
-
46 | Nacera | CAD CAM Materials and Supplies Nacera | CAD CAM Materials and Supplies | 47
Qu
ick
Gu
ide
| Z
irco
nia
Sin
teri
ng
Quick Guide Zirconia Sintering
Tipps &
Hints
Light Construction / Small Mass
Massive Construction / Large Mass
Mass
Crown Thickness Pontic Thickness Heat-/ Cool - Rate /min. Holding Time
0.50 mm - 2.00 mm 3.00 mm - 5.00 mm 8 °C 120 min.
Mass
Crown Thickness Pontic Thickness Heat-/ Cool - Rate /min. Holding Time
2.00 mm - 5.00 mm 5.00 mm - 9.00 mm 4 °C 120 min.
Heat-/ Cool - Rate /min. Holding Time
4 °C 150 - 180 min.Toronto:
8 °C/Min. 185 Min.
8 °C/Min. 185 Min.
1500 °C 120 Min. 1500 °C
20 °C 20 °C
4 °C/Min. 370 Min.
4 °C/Min. 370 Min.
1500 °C 120 Min. 1500 °C
20 °C 20 °C
OWN RISKDIN EN ISO 13356
Qu
ick
Gu
ide
| Z
irco
nia
Sin
teri
ng
1550 °C +1500 °C1450 °C
• Higher sintering temperature will generate grain growth and raises the translucency.
• The grain growth will decrease the strength and increase the translucency.
• The result of a higher sintering temperature will be a bigger grain size and therefore a greater low temperature degradiation.
• Zirconium is a poor heat conductor. The transport of energy in and out of the material takes time. (Lower the heat rates for massive constructions)
• Slow cooling can improve translucency and will work against tensions in the material.
Strength vs. Translucency
Strenght Translucency
i
-
48 | Nacera | CAD CAM Material und Zubehör
4. U
DOCERAM Medical Ceramics GmbHHesslingsweg 65 – 67 | 44309 Dortmund | GermanyPhone +49 231. 9256 680 | [email protected] | www.nacera.de/en
Nacera US Inc.421 N. 7th St. | Philadelphia, PA 19004 | USAPhone: 215-345-5283 | [email protected] | www.nacera.us
Do you have any questions regarding our [email protected] | www.nacera.de
For an overview of all global representations go to: www.nacera.de
Nacera® products are approved for:Europe | USA | Canada | Mexico | Brazil | Australia | China | Japan | Taiwan* | South Korea*
* PL
M (P
riva
te L
abel
Man
ufac
ture
r)
Rev.
2 -
191
9300
030