nace east asia & pacific area conference 2019 final...

11–14 November 2019 | Yokohama, Japan | Pacifico Yokohama

NACE EAST ASIA & PACIFIC AREA CONFERENCE 2019 FINAL

PROGRAM

Supporting Organization:

2 NACE East Asia & Pacific Area Conference Final Program

Welcome to NACE International East Asia & Pacific Area (EAPA) Conference to be held on 11-14 November 2019 at the Pacifico Yokohama, Yokohama, Japan.

Co-hosted by NACE International and the NACE Tokyo Japan Section, the NACE EAPA Conference 2019 brings together 300+ influencers in corrosion control to the area. The conference will combine Japanese hospitality with an exciting technical program and social networking to make this event a memorable experience.

Event participants will have the opportunity to discover the latest corrosion products and technologies, make beneficial industry

connections, and learn from industry leaders on best practices for different corrosion mitigation and repair in different environments and industries. Sponsors and Exhibitors of the event will connect with an engaged, targeted audience – an ideal opportunity to strengthen and build your business partnerships in this region.

We look forward to welcoming you in Yokohama Japan, which offers not only outstanding conference facility but also a great experience on the history of this lovely harbor town!

Thank You!

Sincerely,

Nobuyoshi HaraConference Chair2019 East Asia & Pacific Area Conference

214 215

210

204 304

211

205

STAGE

ENTRANCE


NACE East Asia & Pacific Area Conference Final Program 3

Company Booth Association of Electrochemical Corrosion Prevention Method of Concrete Structures 304Metal Samples 211The Nippon Corrosion Engineering Co., Ltd. 210Sandvik Materials Technology 204Sherwin-Williams 215PPG (Protective & Marine Coating) 205PCCOX Japan Trading Co., Ltd. 214

Floor Plan

Technical Program HighlightsPlenary Lectures12 November 2019, Room 50110:05–10:35 a.m. Prof. Atsushi Nishikata, President of Japan Society of Corrosion Engineering10:35–11:10 a.m. IMPACT Plus, Presented by Michelle Lau, NACE International

Special Lectures13 November 2019, Room 411-412

9:30–10:10 a.m. Role of Hydrogen in Oxidation and SCC in Water—Mechanics and Mechanisms, Presented by Tetsuo Shoji, Tohoku University

10:10–10:30 a.m. An Overview of Corrosion Mitigation Activities Performed After the Fukushima Daiichi Accident, Presented by Yuichi Fukaya, Tokyo Electric Power Company Holdings, Inc.

Special Seminars• NIICAP—Setting the Standard for Coating Contractors, Presented by Kamal Taher, NACE International

13 November 2019, 9:30–11:30 a.m. | Room 413• Preparing for the Future—Next Generation of Coatings Certification, Hosted by Keenan Loubser and Dr. Kari Hodge,

NACE International 13 November 2019, 3:30 - 5:30 p.m. | Room 413

• Material Requirement and Standard for Wet H2S (Sour) Service, Presented by JSCE 13 November 2019, 3:20 - 5:00 p.m. | Room 419

• Management of Corrosion Under Insulation (CUI) in Japan, Presented by Dr. Nakahara, JSCE 13 November 2019, 4:50 - 5:50 p.m. | Room 418

• Preparing for the Future—Next Generation of CP Certification, Hosted by Keenan Loubser and Dr. Kari Hodge, NACE International 14 November 2019, 9:30 - 11:30 a.m. | Room 413

Panel Discussions• Infrastructure Session: JSCE Standard on Design and Application Methods of Galvanized Steel Reinforcement for

Concrete. Life extension of RC structures by Galvanized Steel Reinforcement: is it possible? Room 418 | 13 November 2019, 1:30 - 2:30 p.m.

• Oil & Gas Session: OCTG Materials in Acidizing Environments. Moderator: Yasuyoshi Tomoe, JOGMEC Room 411-415 | 13 November 2019, 9:00 - 10:30 a.m.

Networking Activities

Welcome ReceptionMonday, 11 November 20195:30–7:00 p.m.Meet your fellow attendees as we kickoff the conference with a welcome dinner

Registration: Free

Dinner CruiseWednesday, 13 November 20197:00 –9:00 p.m.Cruise along Yokohama Bay and enjoy dinner with fellow conference attendees

Registration Fee: $100Registration for Networking Activities is available onsite.


Technical Program



MONDAY, 11 November 2019Room 4219:30 a.m.–4:30 p.m. Pre-conference Workshop

Effective and Economical Internal Corrosion Control: What works and what requires additional effortsPresented by Sankara Papavinasam, President of CorrMagnet Consulting Inc.Dr. Papavinasam is currently the president of CorrMagnet Consulting Inc. He has led several joint industry projects as well as individual client projects, with more than 50 companies, developing solutions and insights to control internal corrosion, external corrosion, and microbiologically influenced corrosion of oil and gas production facilities, and transmission pipelines. He is currently consulting with oil and gas companies in Canada, India, Peru, Saudi Arabia, and USA.

5:30–7:00 p.m. Welcome ReceptionMeet your fellow attendees as we kickoff the conference with a welcome dinner.

TUESDAY, 12 November 201911:15 a.m.–5:00 p.m. Exhibition Hours (Room 502)Room 5019:30–10:05 a.m. Opening Ceremony10:05–10:35 a.m. Plenary Lecture: Prof. Atsushi Nishikata, President of Japan Society of Corrosion Engineering

Prof. Nishikata will introduce the activity of Japan Society of Corrosion Engineering and contribution for Corrosion Science and Engineering.

10:35–11:10 a.m. Plenary Lecture: IMPACT Plus: Presented by Michelle Lau, NACE InternationalIMPACT PLUS Portal is an integrated platform for corrosion management professionals who desire to move their companies to higher levels of corrosion management performance.

11:15–11:45 a.m. Opening of the Exhibition (Room 502)11:45 a.m.–1:10 p.m. Lunch Break (Room 503)—Sponsored by PPG Performance CoatingsRoom 411-412: Cost of Corrosion Session1:10–1:30 p.m. Corrosion Cost Survey in Japan 2015

Presented by Tadashi Shinohara, National Institute of Materials Science1:30–1:50 p.m. Thailand Corrosion Cost Survey in 2011 based on the Hoar Method

Presented by Wanida Pongsaksawad, National Metal and Materials Technology Center1:50–2:10 p.m. Afternoon Break—Sponsored by Sherwin Williams2:10–3:40 p.m. Introduction of Corrosion Cost Research in China

Presented by Meng Zheng, China Academy of SciencesCost of Corrosion Panel Discussion: Panelists from Japan, Thailand, USA, China and Vietnam exchange information of cost of corrosion and discuss how to use the cost of corrosion data to improve the reliability of materials applied for assets, then contribute to reduce huge economic and environmental impact by corrosion of materials.Panelists: Wanida Pongsaksawad—National Metal and Materials Technology Center, Thailand; Meng Zheng—Center for Ocean Mega Science, Chinese Academy of Sciences, China; Hong Lien—Institute of Materials Science, Vietnam

Room 414-415: Oil & Gas Session1:10–1:50 p.m. Fundamental Understanding of Corrosion Phenomena and Corrosion Resistant Materials in Oil

and Gas ProductionPresented by Masakatsu Ueda, NACE Fellow

1:50–2:10 p.m. Applicable Domain Map for Martensite-Based Stainless Steel OCTG Materials Through High-Temperature Load-Applied Autoclave Test in Sour EnvironmentPresented by Yasuhide Ishiguro, JFE Steel

2:10–2:30 p.m. Sour Environmental Severity based on Equal Hydrogen Content MapPresented by Taishi Fujishiro, Nippon Steel & Sumitomo Metal Corporation

2:30–3:00 p.m. Afternoon Break—Sponsored by Sherwin Williams


TUESDAY, 12 November 2019 —CONTINUED3:00–3:20 p.m. Well Integrity—Experiences in Corrosion Assessment and Its Control

Presented by Carlos Palacios, CIMA-TQ, LLC3:20–3:40 p.m. Corrosion Resistance of 17Cr SS for Domestic HP/HT Natural Gas Field

Presented by Toshiyuki Sunaba, Inpex 1Corporation3:40–4:00 p.m. Characterization of Passive film on Stainless Steel in Hydrogen Sulfide Environment

Presented by Kazuhiko Baba, JFE Steel Corporation4:00–4:20 p.m. Effect of H2S on Corrosion Behaviors of Stainless Steels Under Environments Containing Organic

AcidPresented by Yonezawa Takumi, Yokohama National University

Room 416-417: Corrosion in Combustion Gas Environments Session1:10–1:30 p.m. Study of Metal Dusting Observed in Coal Gasification Plant

Presented by Yuji Fukuda, Mitsubisi Hitachi Power Systems Ltd.1:30–1:50 p.m. Self-healing Ceramic Composites as a New Environmental Barrier Coating System

Presented by Makoto Nanko, Nagaoka University of Technology1:50–2:10 p.m. Water Wall Tubes Failure Under Localized Attack in High-Pressure Boiler,

Presented by Ali Al-Sahari, Saline Water Conversion Corporation2:10–2:30 p.m. Effectiveness of SiO2/TiO2/Al2O3-based/TiO2 Coating for Suppressing Sulfidation and

Circumferential Cracking in Boiler Tubes of Thermal Power PlantsPresented by Makoto Kawase, Central Research Institute of Electric Power Industry

2:30–3:00 p.m. Afternoon Break—Sponsored by Sherwin Williams3:00–3:40 p.m. Trend of Technology of Corrosion Evaluation in WTE and Biomass Plant Construction and

Operation in Terms of High Efficiency in EUPresented by Wolfgang Spiegel, CheMin GmbH

3:40–4:00 p.m. Surface Treatment Durability Test of Water Tube for Municipal Refuse Incinerator BoilerPresented by Takao Kitagawa, JFE Engineering Corporation

4:00–4:20 p.m. Development of A New Ni-Based Protective Coating Against Erosion-Corrosion in Fluidized Bed Biomass Boiler PlantsPresented by Suzue Yoneda, Hokkaido Research Organization

4:20–4:40 p.m. Furnace Tube High Carbon 35Cr-45Ni-1Nb Rupture at Olefins PlantPresented by Mohd Farid Mohamed, PETRONAS

Room 418: Infrastructure Session1:10–1:30 p.m. Applicability of a Surface Treatment for Promoting Protective Rust Formation to A Weathering

Steel Bridge in the Coastal AreaPresented by Junpei Arakawa, Yokogawa Bridge Holdings Corp.

1:30–1:50 p.m. Corrosion Condition Monitoring and Exposure Tests and for Structural Member of Truss Type Steel BridgesPresented by Seok Hyeon Jeon, Gyeongnam National University of Science & Technology

1:50–2:10 p.m. Corrosion Deteriorated Condition of Steel Floodgate from Experimental Monitoring and Exposure Corrosion TestPresented by Min Ha, Gyeongnam National University

2:10–2:30 p.m. Electrochemical Properties of Hot-dip Al and Al-45Zn CoatingPresented by Yang Gao, Kyushu University

2:30–3:00 p.m. Afternoon Break—Sponsored by Sherwin Williams3:00–3:20 p.m. Evaluation of Electrochemical Properties of Laser-Cleaned Carbon Steel Plate

Presented by Shusen Zhuang, Kyushu University3:20–3:40 p.m. Study on Durability of the RC Structure Using Galvanized Steel Bars in Chloride Induced

Deterioration EnvironmentPresented by Hiromi Yamazumi, Kagoshima University

3:40–4:00 p.m. Electrochemical Evaluation on Corrosion Rate Of Common Steel Near the Air-Liquid Interface Using an Immersion SensorPresented by Muye Yang, Kyushu University



4:00–4:20 p.m. Experimental and Analytical Study on the Measurement Factors of the Four Probe AC Impedance MethodPresented by Toshinori Kanemitsu, Central Research Institute of Electric Power Industry

4:20–4:40 p.m. Evaluation of Anticorrosion Effect of Cathodic Protection with Intermittent Current Supply to Rebar in MortarPresented by Makoto Yamamoto, Sumitomo Osaka Cement Co.,Ltd.

Room 419: Cathodic Protection1:10–2:10 p.m. Cathodic Protection Criteria: The Mechanism of Cathodic Protection and Its Implications on the

Assessment of Effectiveness of CPPresented by Markus Büchler, Swiss Society for Corrosion Protection

2:10–2:30 p.m. Discussion on Applicability of Cathodic Protection Effectiveness Standard under Dynamic DC InterferencePresented by Hongzhi Wang, Pipeline Shenyang Technology Sub-Co

2:30–3:00 p.m. Afternoon Break—Sponsored by Sherwin Williams3:00–3:20 p.m. Influence of Instantaneous Potential Fluctuations on Corrosion Protection Conditions of Buried

Steel Pipelines under Cathodic ProtectionPresented by Tomoyuki Nagai, Osaka Gas Co., Ltd.

3:20–3:40 p.m. Evaluation of the Interference Effect on an Underground Metallic Utility in the Electric Field Formed by an Anode and Cathode in Close ProximityPresented by Taro Kono, Tokyo Gas Co., Ltd.

3:40–4:00 p.m. Ethylene Grid Pipeline (Cathodic Protection Rectification & FFS Evaluation)Presented by Mohd Farid Mohamed, PETRONAS

4:00–4:20 p.m. Extension of Cathodic Protection Effect to Steel Piles at Tidal and Splash Zone par IIPresented by Mohamed Khalil, Raslanuf

4:20–4:40 p.m. Estimation of Self Position of Measurement Point Underwater and Output Current from Sacrificial Anode Using Particle FilterPresented by Tatsuya Saito, The Nippon Corrosion Engineering Co., Ltd.

WEDNESDAY, 13 November 20199:30 a.m.–5:00 p.m. Exhibition Hours (Room 502)Room 411-412: Nuclear Corrosion Session9:30–10:10 a.m. Role of Hydrogen in Oxidation and SCC in Water—Mechanics and Mechanisms

Presented by Tetsuo Shoji, Tohoku University10:10–10:30 a.m. An Overview of Corrosion Mitigation Activities Performed After the Fukushima Daiichi

AccidentPresented by Yuichi Fukaya, Tokyo Electric Power Company Holdings, Inc.

10:30–10:50 a.m. Morning Break—Sponsored by Kansai Paint Co., Ltd.

10:50–11:10 a.m. Corrosion Progress Prediction for Primary Container Vessels in Fukushima Daiichi NPSPresented by Tetsuji Kaneko, Toshiba Energy Systems & Solutions Corporation

11:10–11:30 a.m. Electrochemical Behavior for the PCV Material in Diluted Artificial Seawater with Sodium PentaboratePresented by Kazumi Fujii, Hitachi, Ltd.

11:30–11:50 a.m. Corrosion Behaviour of Carbon Steel Piping in Flowing Diluted SeawaterPresented by Kazutoshi Fujiwara, CRIEPI Matls Science Res Lab

11:50a.m.–1:30p.m Lunch Break1:30–1:50 p.m. Mechanistic Understanding of Flow-Accelerated Corrosion Mitigation by Trace Chromium in

Carbon SteelPresented by Hiroshi Abe, Tohoku University

1:50–2:10 p.m. Corrosion Behavior of Carbon Steel in Pentaborate Solutions Containing NaClPresented by Eiji Tada, Tokyo Institute of Technology

2:10–2:30 p.m. Assessment of Corrosion Risks by Neutron-Absorbers Used for Criticality Prevention during the Fuel Debris Removal in the Fukushima-Daiichi NPPsPresented by Ryo Ishibashi, Hitachi-GE Nuclear Energy, Ltd.


WEDNESDAY, 13 November 2019 — CONTINUED2:30–2:50 p.m. Initiation of Stress Corrosion Cracking of Stainless Steel and Ni-based Alloy in Simulated PWR

Primary Water EnvironmentsPresented by Tsung-Kuang Yeh, National Tsing-Hua University

2:50–3:20 p.m. Afternoon Break3:20–3:40 p.m. Effect of Thermal Aging on SCC Crack Growth Rate of 316L Stainless Steel Weld Metal

Presented by Dan Akazawa, CREIPI3:40–4:00 p.m. Effect of Dendrite Direction on Stress Corrosion Cracking Initiation in Alloy 182 Weld Metal in

High-Temperature WaterPresented by Yuichi Fukaya, Tokyo Electric Power Company Holdings, Inc.

4:00–4:20 p.m. Effect of Weld Dendrite Orientation on Growth Behavior of Stress Corrosion Cracking for Alloy 182 using Plate Specimen with Surface Crack in Simulated BWR EnvironmentPresented by Takuya Ogawa, Toshiba Energy Systems & Solutions Corporation

4:20–4:40 p.m. SCC Growth Behavior of Low Alloy Steels under Negative dK/da conditionPresented by Hiroyuki Nakano, Tokyo Electric Power Company Holdings

4:40–5:00 p.m. Effect of Ion Irradiation on Hydrogen Pick-up of Zr AlloysPresented by Katsuhito Takahashi, Nippon Nuclear Fuel Development Co., LTD.

5:00–5:20 p.m. Probing into Oxidation Kinetics and Stress Corrosion Cracking in Nuclear Power Plant CoolantsPresented by Zhanpeng Lu, Shanghai University

Room 413: Special Seminar9:30–11:30 a.m. NIICAP – Setting the Standard for Coating Contractors,

Presented by Kamal Taher, NACE International3:30–5:30 p.m. Preparing for the Future—Next Generation of Coatings Certification

Hosted by Keenan Loubser and Dr. Kari Hodge, NACE InternationalRoom 414-415:Oil & Gas Session9:00–10:30 a.m. Panel Discussion: OCTG Materials in Acidizing Environments

Usually, corrosion performance of OCTG (Oil Country Tubular Goods) materials is discussed in terms of the corrosiveness of produced fluids, such as partial pressures of CO2 and H2S and so on. In this Panel Discussion, the corrosion performance of OCTG materials will be discussed against very severe acidizing environments. Panelists are representatives of leading related companies such as an acidizing agent supplier, steel makers, and an operator. Moderator: Yasuyoshi Tomoe, JOGMEC

10:30–10:50 a.m. Morning Break—Sponsored by Kansai Paint Co., Ltd. 10:50–11:10 a.m. Corrosion Management in the Oil and Gas Industry: How We Do It Around the World?

Presented by Sankara Papavinasam, CorrMagnet Consulting Inc.11:10–11:30 a.m. Research on the Process and Evaluation of Detailed Examination for Oilfield Pipeline

in China Based on MP-ICDAPresented by Wang Weibin, Shenyang Longchang Pipeline Survey Center

11:30–11:50 a.m. Fit for Purpose Materials Selection for Sour Gas WellPresented by Rachel Lee, Shell Malaysia Exploration and Production

11:50a.m–1:30p.m. Lunch Break1:30–1:50 p.m. Flange Face Corrosion of Tightened Flange Joint during Plant Construction

Presented by Takahiro Tsuda, JGC Corporation1:50–2:10 p.m. Integrity Assessment of Crude Oil Storage Tank

Presented by Muhammad Arsalan Khan Sherwani, Saudi Aramco2:10–2:30 p.m. Case Study of Failure of Duplex Tubes in Air Compressor Cooler in a Refinery in APAC

Presented by Vikram Pandit, Sandvik Materials Technology2:50–3:20 p.m. Afternoon Break



Chemical Treatment Session3:20–3:40 p.m. Corrosion Inhibitor Development and Assessment for Sour Environments Containing Elemental

Sulfur and PolysulfidesPresented by Jeremy Moloney, Nalco Champion

3:40–4:00 p.m. Improvements of Inhibitor Performance with Hydrophobic Nanoparticles Especially for Water PhasePresented by Yasuyoshi Tomoe, JOGMEC—Oil & Gas Upstream Technology Unit

4:00–4:20 p.m. Top of the Line Corrosion Management for PTTEP Multiphase Offshore PipelinesPresented by Kamonwan Ruangpattanatawee, PTTEP

4:20–4:40 p.m. Value Creation of New Cooling Water Start-Up TechnologyPresented by Kaori Sasaki, Kurita Water Industries Ltd.

4:40–5:00 p.m. Corrosion Mitigation/Inibition Using Chemicals—Can It Really Be Achieved?Presented by Carlos Palacios, CIMA-TQ, LLC

Room 416-417: Corrosion Science Session9:50–10:10 a.m. Influence of Metal Cations on Oxide Film Structure Formed on Aluminum Alloys

in Aqueous EnvironmentsPresented by Masatoshi Sakairi, Hokkaido University

10:10–10:30 a.m. Effects of Magnetic Field on Uneven Dissolution of Iron in Sulfuric Acid Solution with ChloridesPresented by Zhanpeng Lu, Shanghai University

10:30–10:50 a.m. Morning Break—Sponsored by Kansai Paint Co., Ltd. 10:50–11:10 a.m. Optical Observation of Pit Initiation and Penetration in Type 304 Stainless Steels

Presented by Noriyuki Ida, Central Research Institute of Electric Power Industry11:10–11:30 a.m. Passive Film Formed on Carbon Steel in Boric Acid-Borate Buffer Solutions

Presented by Koji Fushimi, Hokkaido University11:50a.m–1:30p.m. Lunch Break1:30–1:50 p.m. Corrosion Behavior of Zinc with Native Oxide Formed at Different Temperature

Presented by Chulaluk Somphotch, Tokyo Institute of Technology1:50–2:10 p.m. Self-Healing Smart Vanadium Oxynitride Coating of Aluminum Alloys for Anti-Corrosive

ApplicationsPresented by Jignesh Hirpara, CON, IIT-Roorkee

2:10–2:30 p.m. Tinospora cordifolia and Vitex negundo Plant Extract Effects on the Corrosion Behavior of Aluminum and Copper in Biodiesel and Its BlendPresented by Jagadeesh Bhattarai, Central Department of Chemistry, Tribhuvan University

2:30–2:50 p.m. Nano ZnO and CeO2 Reinforced Phosphating over Graphene Coated BIS 2062 SteelPresented by P Muhamed Ashraf, ICAR—Central Institute of Fisheries Technology

2:50–3:20 p.m. Afternoon Break3:20–3:40 p.m. Effects of Poisons on Hydrogen Entry Behavior into Low Alloy Steel

Presented by Hiroyuki Fuji, Nippon Steel and Sumitomo Metal Corporation3:40–4:10 p.m. Effect of Hydrogen Charging on the Initiation and Propagation of SCC in Sensitized Type 304

Stainless Steels under an MgCl2 Solution DropletPresented by Eiji Tada, Tokyo Institute of Technology

4:10–4:30 p.m. Stress Corrosion Cracking and Hydrogen Embrittlement of Sensitized Stainless Steels: Effect of Sensitizing TimePresented by Osama Alyousif, Kuwait University

Room 418Infrastructure Session9:30–9:50 a.m. Detail Investigation for Achievement of Effective Maintenance Method of Cathodic Protection

Systems for RC and PC BridgesPresented by Masaru Abe, The Nippon Corrosion Engineering Co., LTD

9:50–10:10 a.m. Development of Process-Saving Paint for Steel StructuresPresented by Masahiro Ishibashi, Metropolitan Expressway Company Limited


WEDNESDAY, 13 November 2019 — CONTINUED10:10–10:30 a.m. The Progress of Weathering Performance Using Fluoro-polymer Topcoat System for over 30

Years ExposurePresented by Shuhei Ochi, AGC

10:30–10:50 a.m. Morning Break—Sponsored by Kansai Paint Co., Ltd. 10:50–11:10 a.m. Heating Test of Al-5%Mg Alloy Thermal Sprayed Coating

Presented by Kunihiko Hirono, Fuji Engineering Co., Ltd.11:10–11:30 a.m. Evaluation of Durability of Protective Coating Method of Steel Pipe Pile Based on Long-Term

Marine Exposure Test for 30 YearsPresented by Toru Yamaji, Port and Airport Research Institute

11:30–11:50 a.m. Time-Dependent Corrosion Degradation and Surface Roughness Characteristics and Their Effect on the Mechanical Properties of Structural SteelPresented by Naftary Gathimba, Nagoya University

11:50 a.m–1:30p.m Lunch Break1:30–2:30 p.m. Panel Discussion: JSCE Standard on Design and Application Methods of Galvanized

Steel Reinforcement for Concrete. Life extension of RC structures by Galvanized steel Reinforcement, is it possible? Moderator: Prof. Ueda, Tokushima University

2:50–3:20 p.m. Afternoon BreakProcess Industry Session3:20–3:40 p.m. Evaluation of the Corrosion Resistance of Aluminum Alloys in Methanol Solutions

Presented by Takao Ohtsu, Mitsubishi Chemical Co3:40–4:10 p.m. Post-Weld Surface Crack Observation in Twenty-Six Years Aged Incoloy 800H Pigtail Tubes in

a Hydrogen Production PlantPresented by Majid Abbasi, SK Innovation

4:10–4:30 p.m. Critical Corrosion Group in Ethylene and Glycol Producing PlantPresented by Mohd Farid Mohamed, PETRONAS

4:30–4:50 p.m. Assets Integrity Management Through Corrosion Mitigation, Monitoring and Inspection to Enhance Safety and Reliability in RefineriesPresented by Iftikhar Ahmad, Arabian Gulf Oil Company (AGOCO), Libya

Special Seminar on Process Industry4:50–5:50 p.m. Management of Corrosion Under Insulation (CUI) in Japan, Presented by Dr. Nakahara

CUI is a major threat to the safety operation of aged plants because corrosion rate of CUI is very scattered, and it is very difficult to predict where to be inspected and when to be repaired. The result of research and development project of CUI modeling, which is supported by METI (Ministry of Economy, Trade and Industry) and NEDO (New Energy and industrial Technology Development Organization) of Japan, will be explained in the seminar. 13,600 inspection data of CUI gathered from 13 chemical companies in Japan have been analyzed by machine learning and CUI prediction model has been developed. The CUI model has been open to the chemical companies and verified by additional 2,400 inspection. The seminar is 60 minutes long, which lectured by English and simultaneous interpretation to Japanese will also be provided.

Room 419Cathodic Protection Session9:30–9:50 a.m. Study on Application of Installation Method by Magnetic Adsorption System for Aluminum

Alloy Anode on Cathodic Protection for Marine Steel StructuresPresented by Kodai Kurino, Kagoshima University

9:50–10:10 a.m. Study on Influence of Monitoring Position for Cathodic Protection on Corrosion Protection Performance of Rebar in RC StructuresPresented by Yasuyuki Hamada, Kagoshima University

10:30–10:50 a.m. Morning Break—Sponsored by Kansai Paint Co., Ltd. 10:50–11:10 a.m. Outdoor Exposure Test Result of Cathodic Protection Method Using Semiconducting Mortar

Presented by Mikio Wakasugi, Chemical Construction Co., Ltd.11:10–11:30 a.m. Basic Study on Cathodic Protection Using Secondary Coating Anode

Presented by Mikio Wakasugi, Chemical Construction Co., Ltd.



11:30–11:50 a.m. Mitigation of Rebar Corrosion in Concrete with Galvanic Anodes—Investigation on Current and Potential ShiftPresented by Motoki Onoda, Credence Co.

11:50a.m–1:30 p.m Lunch Break1:30–1:50 p.m. Study on the Corrosion Rate Management Method of the Cathodic Protection for the Rebar in

ConcretePresented by Shunsuke Otani, Nakabohtec Corrosion Protecting Co., Ltd

2:50 – 3:20 p.m. Afternoon BreakSpecial Seminar on Oil & Gas3:20–5:00 p.m. Material Requirement and Standard for Wet H2S (Sour) Service

Understanding the technical background of how to prevent material degradation in wet H2S (Sour) service such as Sulfide Stress Cracking (SSC) and Hydrogen Induced Cracking (HIC) is very important for materials engineers in Oil & Gas production and petroleum refining industry. In the seminar material requirement to prevent SSC and HIC and related standards of NACE MR0175 and MR0103 will be lectured for beginners. The seminar is 120 minutes long, which lectured by Japanese and simultaneous interpretation to English will also be provided.

THURSDAY, 14 November 2019 9:30 a.m.–12:00 p.m. Exhibition Hours (Room 502)Room 411-412: Atmospheric Corrosion Session9:00–9:20 a.m. Corrosion of Fe During Repeated Wet-Dry Cycling Tests with NaCl Solutions-Effect of Cl-

Concentration on Corrosion morphology of Fe-

Presented by Kosaku Nomura, National Institute of Technology, Asahikawa College9:20–9:40 a.m. Investigation on the Susceptibility to Atmospheric Induced Stress Corrosion Cracking of Type

304 and 316 Austenitic Stainless SteelPresented by Nga Nguyen, Institute of Materials Science

9:40–10:00 a.m. Corrosion Behavior of Steel in the Atmosphere of Vietnam Presented by Lien Le, Institute of Material Science

10:00–10:30 a.m. Morning Break—Sponsored by Dai Nippon Tokyo Co., Ltd.

10:30–10:50 a.m. Effect of Relative Humidity and Temperature on the Corrosion Behavior of AA3003 and AA6016 under Artificial Sea WaterPresented by Parunyoo Kamnerdkhag, UACJ Corporation

10:50–11:10 a.m. Influence of Temperatures on Oxygen Diffusion Behavior in Thin Solution Layer Formed on MetalPresented by Masaya Taniguchi, Hokkaido University

11:10–11:30 a.m. Improvement of Solder Wettability with Electrochemical Reduction of Oxide Film Formed at Atmospheric EnvironmentPresented by Takuya Takeda, Tokyo Denki University

Room 413: Special Seminar9:30–11:30 a.m. Seminar: Preparing for the Future—Next Generation of CP Certification

Hosted by Keenan Loubser and Dr. Kari Hodge, NACE InternationalRoom 414-415: Marine Corrosion Session9:00–9:30 a.m. Session Introduction9:30–9:50 a.m. 21st Century Corrosion Management: Modern ideas for an Old Maritime Menace,

Presented by Buddy Reams, Chief Maritime Officer, NACE InternationalNACE International’s Chief Maritime Officer will discuss a modern, cost saving approach for addressing a risk that the maritime industry has faced since its inception. Topics related to work going on at the International Maritime Organization, industry stakeholder groups, and some of the specific tools available will be addressed.

9:50–10:10 a.m. Evaluation of Durability of Petrolatum Lining in Marine EnvironmentPresented by Masahiko Hoshino, Nakabohtec Corrosion Protecting Co.,Ltd

10:00–10:30 a.m. Morning Break—Sponsored by Dai Nippon Tokyo Co., Ltd. 10:30–10:50 a.m. Corrosivity of Seawater and Brine Under Different Environmental Conditions

Presented by Mabruk Suleiman, ADNOC Refining


THURSDAY, 14 November 2019 — CONTINUED10:50–11:10 a.m. Verification & Validation of a Cellular Automaton Model Simulating Under-Film Corrosion

Presented by Naoki Osawa, Osaka University11:10–11:30 a.m. Influence of Inorganic Zinc Primer on Under-film Corrosion Simulation Parameters Based on

Cellular AutomatonPresented by Kazuhiko Shiotani, JFE Steel Corporation

11:30–11:50 a.m. Onboard Test Results of Corrosion Resistant Steel for Crude Oil TankersPresented by Ryota Kato, Kobe Steel, LTD.

11:50a.m–1:10p.m. Lunch Break1:10–1:40 p.m. Painting Ships in the Future

Presented by Ralitsa Mihaylova, Safinah1:40–2:00 p.m. Onboard Test Results of the Corrosion Resistant Steel for Ballast Tank

Presented by Yusuke Miura, Kobe Steel, LTD.2:00–2:20 p.m. Structural Reliability of Ship Hull Girder with Corroded Members under Longitudinal Bending

Presented by Daisuke Yanagihara, Kyushu University2:30–3:00 p.m. Afternoon Break3:00–3:20 p.m. A Study on Optimum Spray Coating Conditions of IMO PSPC Certified Epoxy Paints Using

Pneumatic Airless Pump for ShipbuildingPresented by Jong Woo Park, STX O&S / ASEF

3:20–3:40 p.m. Visual Determination of Film Thickness via Real-Time Enhanced Digital ImagingPresented by Mark Schultz, Sherwin-Williams Co.

3:40–4:00 p.m. Backside Burning Prevention Method for PSPC in Welding Process for Outfitting Equipment Presented by Takeshi Shinoda, Kyushu University

4:00–4:20 p.m. Non-Destructive Monitoring of Early Under Film Corrosion of Coated Steel Panel by Using Fe(II) Fluorescent IndicatorPresented by Atsushi Takada, National Maritime Research Institute

Room 416-417: Microbiologically Influenced Corrosion (MIC) Session9:00–9:20 a.m. Corrosion Behaviour in Co-Existence of Iron-Corrosive Microorganism and Non-Corrosive

BacteriaPresented by Satoshi Wakai, Kobe University

9:20–9:40 a.m. Effects of Physicochemical and Biological Conditions on Carbon Steel Corrosion in SoilPresented by Kazuhiko Miyanaga, Tokyo Inst of Technology

9:40–10:00 a.m. Electrochemical Properties of Two Sulfate Reducing Bacteria from a Paraffin-Degrading ConsortiumPresented by Shin-ichi Hirano, Central Research Institute of Electric Power Industry

10:00–10:30 a.m. Morning Break—Sponsored by Dai Nippon Tokyo Co., Ltd. 10:30–10:50 a.m. Molecular Mechanism of Souring Caused by Desulfotignum Species Screened from Crude Oil

Well in Akita JapanPresented by Yasunori Tanji, Tokyo Institute of Technology

10:50–11:10 a.m. Microbial Controlling Strategy for Upstream Oilfield ProcessPresented by Afizza Izzma Mustapa, Petronas Carigali Sdn Bhd

11:10–11:30 a.m. HPAM Based Enhanced Oil Recovery (EOR) Polymer Impact on Microbial Growth and Microbial Induced Corrosion (MIC)Presented by Hasrizal Abd Rahman, PETRONAS Research SDN. BHD

11:30a.m–1:10 p.m Lunch Break1:10–1:30 p.m. Metal Corrosion by a Marine Isolated Bacterium in Response to Environmental Changes

Presented by Nanako Ito, University of Tsukuba1:30–1:50 p.m. Effect of Pickling and Mechanical Grinding on Initiation of Biofilm and Microbially Influenced

Corrosion of Stainless Steel WeldmentPresented by Hiroshi Kawakami, Osaka City University



1:50–2:10 p.m. Dynamic Observation of Corrosion Behavior of Austenitic Stainless Steel under Bio Corrosion Inducing EnvironmentsPresented by Yasuyuki Miyano, Akita University

2:10–2:30 p.m. Panel Discussion2:30–3:00 p.m. Afternoon BreakRoom 419: General Coatings Session9:00–9:20 a.m. The Quantitative Evaluation of the Thick Anticorrosion Coating Degradation

Presented by Yoko Nishida, Tokyo Gas Co., Ltd.9:20–9:40 a.m. Coating Protection for Steel Piles at Phu My Port—Vietnam: Impacts of Atmospheric, Tidal,

Submerged and Subsoil ZonesPresented by Vinh-Dat Vuong, Ho Chi Minh City University of Technology

9:40–10:00 a.m. Application-Type Surface Preparation Agent which Replaces the Physical Surface Preparation MethodPresented by Akira Oda, Dai Nippon Toryo Co., Ltd.

10:00–10:30 a.m. Morning Break—Sponsored by Dai Nippon Tokyo Co., Ltd. 10:30–10:50 a.m. The Performance and Application Parameters for Internal Lining of Potable Water Pipelines:

A Comparative Study of Some Lining SystemsPresented by Iftikhar Ahmad, Arabian Gulf Oil Company (AGOCO) Libya

10:50–11:10 a.m. Coating Specification Considerations for Bulk ValvesPresented by Neil Wilds, Sherwin-Williams

11:10–11:30 a.m. External Corrosion Direct Assessment of a Tape Wrap PipelinePresented by Muhammad Arsalan Khan Sherwani, Saudi Aramco

11:30–11:50 a.m. Permeability of Mortar with Surface Penetrant after Weathering Test for 20 yearsPresented by Shinichi Miyazato, Kanazawa Institute of Technology

11:50a.m–1:10p.m. Lunch Break1:10–1:30 p.m. Corrosion Resistance of Electroplated Zn-Ni Alloy Coatings Passivated in Trivalent Chromium

SolutionPresented by Tru Nguyen, Ho Chi Minh City University of Technology

1:30–1:50 p.m. Corrosion Protection of Al Alloy Coated by New Surface Treatment Layer, Hybrid Surface LayerPresented by Haruno Yanagimoto, National Institute of Technology, Asahikawa College

1:50–2:10 p.m. Marine Exposure Test of Conductivity Mortar Cover Method for Cathodic Protection Applied to Marine Steel StructuresPresented by Hikaru Yuji, Toyo Construction Co., Ltd.

2:10–2:30 p.m. Advanced Epoxy Coating Technology for Use on High Temperature Insulated and Uninsulated SteelworkPresented by Darren Ward, International Paint

2:30–3:00 p.m. Afternoon Break3:00–3:20 p.m. Mechanism of CUI and Its Protective Painting

Presented by Hiroshi Yamashita, Kansai Paint Co.,Ltd3:20–3:40 p.m. Your LNG facilities—How Safe Is Your Structure If Exposed to Cryogenic Releases? A Critical

Review from a Leading Supplier of Cryogenic SolutionsPresented by Robin Wade, International Paint

3:40–4:10 p.m. Understanding of Temperature Effects on Epoxy Intumescent PFP Coatings in Relation to Steel Strains and Potential Risk of Cracking and DelaminationPresented by Richard Holliday, PPG Protective & Marine Coatings

Poster Session• A New System of Corrosion Flow Loops and Some Experimental Results

Presented by Jinyang Zhu, University of Science and Technology Beijing• Photolithography for fabricating microelectrodes to analyze corrosion reaction depending on micro-structure

Presented by Nozomi Ishii, Hokkaido University• Passivating behavior of steel surface in channel flow electrochemical cell observed by ellipso microscopy

Presented by Fujimura Akihiro, Hokkaido University• Potentiostatic liquid-phase ion gun for local sulfidation of iron surface

Presented by Satoshi Nakatsuji, Hokkaido University• Evaluation of corrosion effect by microorganisms on stainless steels using electric measurement and metal/microbial

simultaneous techniques Presented by Chengwei Yao, Graduate School of Engineering Science, Akita University

• Development of ultra-strong martensitic steels used for automotive applications, and their susceptibility to hydrogen embrittlement induced by aqueous corrosion Presented by Seung Min Ryu, Sunchon National University

• Study on the soil corrosivity to the buried metallic pipes in Maharajganj–Bhudhanilkantha Roadway Areas of Kathmandu Valley Presented by Jagadeesh Bhattarai, Tribhuvan University

• Analysis of progress of hydrogen embrittlement using a stochastic process model Presented by Takuya Kamisho, Nippon Telegraph and Telephone Corporation

• Corrosion monitoring of metal foils inside the equipments under the deposited snow Presented by Tatsuki Nishioka, Graduate School of Chemical Sciences and Engineering, Hokkaido University

• Electro-code position of Ti from EMIC-TiCl4 ionic liquid bath Presented by Atsushi Ooki, Graduate School of Chemical Sciences and Engineering, Hokkaido University

• Corrosion properties of epoxy-graphene nanocomposite coatings Presented by Marcin Grobelny, Motor Transport Institute

• Effects of graphene particles on mechanical and corrosion properties of epoxy-graphene nanocomposite coatings Presented by Malgorzata Kalisz, Motor Transport Institute

• Hydrogen embrittlement property of high-strength steel sheets evaluated by using U-bend specimens Presented by Yuki Shibayama, Graduate school of Engineering, Tohoku University

• Hydrogen permeation behavior of shape controlled scratch on Zn coated steels during wet-dry cyclic corrosion Presented by Kei Sakata, Hokkaido University

• Effect of segregations on electrochemical behavior of aluminum alloys with micro droplet cell Presented by Maeda Shintaro, Hokkaido University

• Erosion & corrosion assessment for stuck components in gas well Presented by Jehad Al Aithan, Saudi Aramco

• Transient in local pH on Al surface during atmospheric corrosion using a system measuring pH distribution Presented by Satoru Motizuki, Kansai University

• Effect of humidity on rate of hydrogen permeation for iron covered with the rust produced by dry-wet cycling Presented by Wang Yang, Kansai University.

• Corrosion behavior of AZ61 Mg alloy in carbonate and borate buffer solutions Presented by Shohei Fujikawa, Kansai University

• Analysis of hydrogen states present in vicinity of the fracture surface under elastic region for ferrite-martensitic dual-phase steel Presented by Daichi Asari, Sophia University

• Hydrogen embrittlement susceptibility evaluation in V-bearing high strength steels containing undissolved and precipitated VC Presented by Kodai Hokazono, Sophia University

• Cathodic protection system for subsea oil & gas development; challenges, solution and system reliability Presented by Chijindu Nzuruba, Lujo Integrated Services Limited

• Reduction in delayed fracture susceptibility of tempered martensitic steels through strain aging treatment Presented by Shinya Hagiwara, Sophia University


• Determination of strain induced defect type enhanced by hydrogen in pure iron Presented by Yuri Sugiyama, Sophia University

• Hydrogen states present and hydrogen embrittlement susceptibility of high strength weld metal Presented by Ryuichi Inoue, Sophia University

• Hydrogen embrittlement of X80 pipeline steel with stress concentration Presented by Tomoka Homma, Sophia University

• Analysis of hydrogen states present and strain distribution of tempered martensitic steel under the application of cyclic elastic stress in the presence of hydrogen Presented by Masaharu Ohori, Sophia University

• Durability study on 150 MPa high strength mortar with micro fiber and cracks under chloride environment from the viewpoint of steel corrosion Presented by Loke Yen Theng, Kyushu University

• Repair strategy of reinforced concrete beams damaged by chloride-induced corrosion Presented by Khalilah Kamarulzaman, Kyushu University

• Influence of Cu(II) on the formation of magnetite rust particles prepared by aerial oxidation of aqueous FeCl2 solutions Presented by Hidekazu Tanaka, Shimane University

• Effect of Pseudomonas aeruginosa biofilm on the mechanical and corrosion behavior of 316L stainless steel and alpha brass Presented by Ameeq Farooq, University of Punjab

• Surface films for corrosion resistance of high strength Cu - Sn - Zr alloys in tap water Presented by Itaru Ikeda, Graduate School of Natural Science and Technology, Gifu University

• High temperature corrosion of type 304 stainless steel in alkali chloride salt: the effect of pre-oxidation treatment Presented by Syamimi Kassim, School of Materials and Mineral Resources Engineering

• Electrochemical behavior of steels with rust formed in atmospheric environment Presented by Agostinho Ariande, Tokyo International Exchange Center

• Detailed investigation of airborne chloride ion in wide area for management of infrastructures Presented by Komi Yufune, Kagoshima University

• Evaluation of corrosion resistance of RC structures with galvanized steel bars through exposure testing Presented by Sota Akatsuka, Kagoshima University

• Evaluation on corrosion protection of urethane elastomer coating method for marine steel structures based on 9-year exposure test results Presented by Koya Wakasugi, Kagoshima University

• Study on appropriate monitoring position of cathodic protection applied to RC structures Presented by Masaki Kawabata, Kagoshima University

• Green and Sustainable Antioxidant Polymer from Plant Extracts Presented by Nour Abdelrahman, UAEU




Visit ppgpmc.com to learn more about PPG PITT-CHAR NX

PPGPITT-CHAR® NXA major advance inPFP technology that is safer, tougher, thinner, lighter and faster.

PPG PITT-CHAR NX is our next generation flexible epoxy intumescent

coating system, designed to resist the most severe hydrocarbon hazards.

Ideally suited to both onshore and offshore environments in the oil, gas

and petrochemical industries, PPG PITT-CHAR NX substantially reduces

both the thickness and weight of Passive Fire Protection (PFP) coating

allowing for lower costs and significantly faster application.

Extremely tough, yet uniquely flexible, PPG PITT-CHAR NX is designed

to eliminate the risk of cracking and delamination during fabrication,

transportation and construction. This toughness provides dependable

performance against weathering and outstanding corrosion protection

throughout the asset’s entire lifetime.

PPG PITT-CHAR NX – next generation flexible passive fire protection.

TOUGHER

THINNER

LIGHTER

FASTER

SAFER



Code of Ethics

Anti-Harassment Policy NACE is committed to providing an environment free of sexual harassment (which includes harassment based on gender, pregnancy, childbirth, or related medical conditions), as well as harassment based on such factors as race, color, religion, national origin, ancestry, age, physical disability, mental disability, medical condition, marital status, sexual orientation, gender identity, gender expression, workers’ compensation leave, veteran status, or any other condition or characteristic protected by law. We expect all participants at NACE East Asia & Pacific Area Conference to abide by this Anti-Harassment Policy in all venues at East Asia & Pacific Area Conference, including ancillary events and official and unofficial social gatherings.

§ Exercise consideration and respect in your speech and actions. § Refrain from demeaning, discriminatory, or harassing behavior and speech. § Be mindful of your surroundings and of your fellow participants. § Alert NACE staff if you notice harassment.

If you are being harassed, notice that someone else is being harassed, or have any other concerns, please contact Reygie de Borja at +63 917 654 1108 on-site immediately.

THE FUNDAMENTAL PRINCIPLESMembers uphold and advance the integrity, honor, and dignity of the members’ profession by using their knowledge and skill for the enhancement of human welfare; being honest and impartial, and serving with fidelity the public, their employers, and clients; and striving to increase the competence and prestige of the corrosion engineering profession. THE FUNDAMENTAL CANONSA. Members shall hold paramount the safety, health, and welfare of the public in the performance of their professional duties.B. Members shall perform services only in the areas of their competence.C. Members shall continue their professional development throughout their careers and shall provide opportunities for

the professional development of those members under their supervision.D. Members shall act in professional matters for each employer or client as faithful agents or trustees and shall avoid

conflicts of interest.E. Members shall build their professional reputation on the merit of their services and shall not compete unfairly with others.F. Members shall associate only with reputable persons or organizations.G. Members shall issue public statements only in an objective and truthful manner.H. Members shall not maliciously injure the reputation, prospects, or business of others, but this does not remove the

moral obligation to expose unethical conduct.

NACE International specifically prohibits sexual harassment by or against any employee, member, officer, director, or other volunteer, vendor, or customer; and such conduct will not be permitted or condoned.

Alcohol Consumption Policy NACE International is committed to the health and well-being of its staff, members, customers, event participants, and vendors. The Association expects individuals who choose to consume alcohol at NACE-affiliated events to do so legally and in moderation. The use of alcoholic beverages by any participant at a NACE-affiliated event shall be in compliance with federal, state and local laws. Persons who infringe upon the rights of others, who conduct themselves in a disorderly manner, or who damage or destroy property shall be subject to disciplinary and/or criminal action. All participants are expected to abide by this alcohol policy in all venues at NACE East Asia & Pacific Area Conference, including ancillary events and official and unofficial social gatherings. Participants shall conform to the requirements of this Policy and all other applicable NACE International policies, including but not limited to the NACE Code of Ethics and anti-harassment policies.

Visit ppgpmc.com to learn more about PPG PITT-CHAR NX

PPGPITT-CHAR® NXA major advance inPFP technology that is safer, tougher, thinner, lighter and faster.

PPG PITT-CHAR NX is our next generation flexible epoxy intumescent

coating system, designed to resist the most severe hydrocarbon hazards.

Ideally suited to both onshore and offshore environments in the oil, gas

and petrochemical industries, PPG PITT-CHAR NX substantially reduces

both the thickness and weight of Passive Fire Protection (PFP) coating

allowing for lower costs and significantly faster application.

Extremely tough, yet uniquely flexible, PPG PITT-CHAR NX is designed

to eliminate the risk of cracking and delamination during fabrication,

transportation and construction. This toughness provides dependable

performance against weathering and outstanding corrosion protection

throughout the asset’s entire lifetime.

PPG PITT-CHAR NX – next generation flexible passive fire protection.

TOUGHER

THINNER

LIGHTER

FASTER

SAFER


C2020 AD RESIZE NEEDED

Don’t miss out on THE corrosion and protective coatings industry event of the year!

��• ��

��• ��

NACE is bringing the world’s largest corrosion conference & expo back to its home town, HOUSTON!

Expect CORROSION 2020 to be bigger than ever with more exhibits, more attendees, and more corrosion and coatings content.

Expand your professional network and build key business partnerships with:

corrosion industry professionals from 60 countries

hours of technical education, corrosion knowledge & professional development strategies for whatever your corrosion-fighting role

6,000+6,000+ 1,000+1,000+

400+400+ companies from around the globe displaying the latest corrosion control products, technologies, and services

Save the date and visit nacecorrosion.org for more informa-tion on attending or contact [email protected] for exhibits

and sponsorship opportunities.



Thank You to our 2019 Sponsors:

OFFICIAL MEDIA PARTNERS

nace east asia & pacific area conference 2019 final...

Documents