TMN-Ject™ LFVariable Rate Application

N-Ject LF uses Pulse Width Modulation (PWM) technology to act as an automatic variable orifice. This allows each orifice to adjust for your liquid fertilizer application needs.

Variable rate application adjusts liquid fertilizer flow in response to rate and speed. Flow is evenly distributed across the toolbar to provide accurate row-to-row uniformity through a wide range of application rates.

N-Ject LF has the ability to apply 5-40 GPA when operating at 10 mph at 40 psi with 30” row spacing.

N-Ject™ LF takes standard liquid fertilizer application and transforms it into “on demand variable rate” as it automatically and quickly adjusts liquid flow for rate or speed changes.

www.capstanag.com • 855-628-7722

Application Systems for ProfessionalsTM

N-Ject LF Features

• 5 GPA to 50 GPA Response Range• Instantaneous Flow Adjustment• Rate Controller Compatibility • Controlled Flow Distribution• Instant On/Off Control

TMTM

Performance• Optimized fertilizer dosage • Increased speed ranges• Independent rate management• Ease of operation

Value• Variable rate capable• Improved application range• Constant application • Consistent row uniformity

APPLICATION RANGE (GPA)

30” SPACING W 5/32” N-JECT LFPSI 4 mph 6 mph 8 mph 10 mph 12 mph20 9 to 70 7 to 50 5 to 35 4 to 28 3 to 2340 13 to 100 9 to 66 7 to 50 5 to 40 4 to 33

60 15 to 120 10 to 80 8 to 60 6 to 48 5 to 4080 18 to 140 12 to 90 9 to 70 7 to 56 6 to 47

www.capstanag.com • 855-628-7722

© 2019 Capstan Ag Systems, Inc. All Rights Reserved All trademarks are owned by Capstan Ag Systems, Inc.

Visit us online or your CapstanAG Dealer for a demo

“N-Ject LF was the variable rate technology link I needed to

achieve fast reaction time rate changes through a wide range

of application rates”

—Craig Deim

N-Ject™ LFVariable Rate Application