myungse cmk. user manual this manual will explain proper usage procedures for the electromotive...

MYUNGSE CMK

EmoS

USER MANUAL

This manual will explain proper usage procedures for the Electromotive Hot/Cool Service Cart

that will ensure safe and comfortable handling and usage.

For safe use of this product, please read through all the information in this User Guide, including

the warnings, cautions, and instructions, before continuing.

Improper use of this product will cause malfunction or breakage, and may cause accidents.

We will not be liable for any accidents caused by a violation of the instructions or by careless

use.

[ A Word of Caution]

* Equipment is designed for indoor use. Do not use outdoors

* Please be sure to perform daily inspection.

* In order to ensure safety, routine maintenance checks are recommended.

Warnings and Precautions are marked by the icons below.

Please be especially aware of these warnings, cautions, and

bolded remarks.

! Warning! This sign indicates possible injury to person(s)

! Attention! This sign indicates possible product damage or mal-function

* Using batteries, controller, etc. that were not supplied by our com-pany lead to critical failure

* Please note that the information and specifications in this manual are subject to change without prior notice.

EmoS 2

Table of Contents1. Safety Precautions ----------------------- 5

2. Specifications ------------------------------ 7

3. Operation Instructions ------------------ 8 • Controls • Screen on/off • Screen Functions(Hot & Cool Use) • Screen Functions(settings) • Start Setting Mode • Setting Temperature • Setting back Light • Setting Deodorization function • Setting DOOR LOCK, • Setting Temperature verifying • Setting Password • Setting Reservation Timer • Hot/Cool Operation • Hot/Cold Graphic mode • Reservation Timer • Deodorization • Setting time • Screen Functions(Electromotive Driving) • Electromotive driving • Tray Insertion • How to use • Storage and Maintenance 4. Battery and Charging -------------------- 38 • Replacing Battery • FAQs

EmoS 3

USER MANUAL

Table of Contents

5. Convenience ------------------------------- 41 • Rear Camera • Front Touch Sensor • Emergency Switch

6. Additional Functions --------------------- 43 • RFID Reader Installation • Setup Program • Temp Data and Event Data 7. Daily Maintenance ----------------------- 53 8. Trouble shootings ------------------------- 55 9. Warranty ------------------------------------ 58

EmoS 4

USER MANUAL

EmoS사용설명서 EmoSSafety Precau-tions

3EmoS 5

SAFETY PRECAUTIONS

EmoSSafety Precau-tions

4EmoS 6

SAFETY PRECAUTIONS

EmoSSpecifications

5EmoS 7

SPECIFICATIONS

TYPE MODEL TRAY PITCH

DIMENSIONS(mm)WEIGHT

(Kg)INCLUDEDOPTIONL W H

ELECTROMO-TIVE

FULL OPTION

EmoS-HC20EF 96mm 1,110 810 1,595 270 1. FRONT TOUCH SEN-SOR 2. TOUCH SCREEN 3. EXTERNAL THERMOMENTER 4. REAR CAMERA

EmoS-HC24EF 80mm 1,110 810 1,595 280

EmoS-HC26EF 80mm 1,110 810 1,675 300

EmoS-HC30EF 80mm 1,110 810 1,835 320

ELECTRICAL SPECIFICATIONS 208V, 50/60Hz, 14.4A, 3.0KW




ELECTROMO-TIVE

STANDARD

EmoS-HC20ES 96mm 1,110 810 1,595 270

1. GRAPHIC LCD 2. FRONT TOUCH SEN-SOR

EmoS-HC24ES 80mm 1,110 810 1,595 280

EmoS-HC26ES 80mm 1,110 810 1,675 300

EmoS-HC30ES 80mm 1,110 810 1,835 320





MANUAL DRIVEFULL OPTION

EmoS-HC20MF 96mm 1,110 810 1,595 270

1. TOUCH SCREEN 2. EXTERNAL THERMOMENTER

EmoS-HC24MF 80mm 1,110 810 1,595 280

EmoS-HC26MF 80mm 1,110 810 1,675 300

EmoS-HC30MF 80mm 1,110 810 1,835 320





MANUAL DRIVESTANDARD

EmoS-HC20MS 96mm 1,110 810 1,595 270

1. GRAPHIC LCDEmoS-HC24MS 80mm 1,110 810 1,595 280

EmoS-HC26MS 80mm 1,110 810 1,675 300

EmoS-HC30MS 80mm 1,110 810 1,835 320


EmoS 8

OPERATION INSTRUCTIONS

* When not in use, push the Power button to turn off. (battery may discharge)

* Please check for obstacles before operating.

* Even in an emergency situation, do not shut off the power. The cart can brake

suddenly as needed.

Warn-ing!

!

This is where the hot/cool settings and electromotive driving controls are located.

Controls

①

②

③

④

⑤

⑥

⑦

⑧

⑨

⑩

EmoS 9


① External Power Outlet: AC Power Input (Charging, heating/cooling)

② Touch Screen: Hot/Cool control and electromotive control

③ Smart Card: used for granting permission to operate, Information storage for patient meals④ USB: Temperature & Event Data Confirmation,

⑤ Battery Charge: Displays charging status

⑥ Emergency Switch: Stops car during operation in the even of an emer-gency⑦ Front Touch Sensor: When lower speeds are necessary because of risk of danger, applying pressure to the sensor will lower the driving speed

⑧ Power Switch: Used to turn the Touch Screen ON/OFF

Red light: Lights up red when AC power is on

Green light: Lights up green when monitor is on

⑨ Hot/Cool Function Check Light: Lights up when Hot/Cool function is in use, turns off when not in use

⑩ Forward/Reverse Throttle Handle: Pressing the right button drives cart forward,

Pressing the button a little harder will increase forward speed.

Pressing left button drives cart in reverse, pressing a little harder will

increase reverse speed.

EmoS 10


Attention! !

• Applying excessive force to the front screen can cause damage, and lead to malfunction.

1. Plug in AC power cable, and check that the Power lamp lights up red.

2. If the AC power cable is not connected, the Power lamp will not come on. However, if you press the power switch with battery charge, the screen will turn on (Electromotive Type).

3. Lightly press the power button, and the green lamp lights up as the screen turns on.

Turning Screen On

EmoS 11


4. When the login screen appears on the display,hold up the Smart Card to the Smart Card panelfor about 2 seconds.

5. It may take about 1 min. to 1 min. 30 sec. to see the login screen.

6. The Smart Card must be within 5cm of the Smart Card panel to recognize and verify.

• Please note that the cart will not function without the Smart Card, so avoid misplacing it

1. While turned on, lightly press the Power button, and the Power lamp will change to red as the screen turns off

Attention!

!

Turning Screen Off

EmoS 12


① Hot/Cool button: When button is pressed, Hot/Cool operation is activated.Pressing button again will stop operation.

② Hot Storage Temp: Displays desired temperature for warm storage.

③ Cool Storage Temp: Displays desired temperature for cold storage.

④ Hot Temp Display: Shows internal temperature for Hot compartment.

⑤ Cool Temp Display: Shows internal temperature for Cool compartment.

⑥ External Temp Display : Uses external temperature sensor to measure internal food temperature. Temperature will only be displayed when pressing the red button on the external temperature sensor.

⑦ Save Data : Saves your settings to a USB flash drive in the USB port

⑧ Drive: Pushing this button will switch to Electromotive Driving mode (Electromotive type).

Screen Functions(Hot/Cool Use)

②

③

④

⑤

⑥

①

⑧

⑦ ⑨

⑩

⑪

⑫⑬

⑭

EmoS 13


⑨ Deodorization Button : Used to remove odors inside a room. Timer function available (Max. 60 min)

⑩ Timer Button : Used to automatically schedule up to 4 functions.Timer function available (Max. 120 min)

⑪ Temperature Conversion Lamp : Used to verify or usage. ℃ ℉

⑫ Setting Mode Button : Used to change settings, including desired temperatures, etc.

⑬ Graph Button : Used to display Hot/Cool temperatures via a graph.

⑭ Clock : Used to check current time, and change date/time settings.

EmoS EmoS 14


① Hot Storage Temp Settings:Set from range of 50 ~120 (122℃ ℃ ~248℉ ℉)

② Cool Storage Temp Settings:Set from range of -5 ~25 (23 ~77 )℃ ℃ ℉ ℉

③ Hot/Cool DT Setting: Hot/Cool activates when difference in temp. reaches this value. Default settings: 2( ), 4( )℃ ℉

④Hot/Cool DL Setting: Value indicates length of time before applying set temperature.Default settings are all 0.

⑤Offset Settings: When there is a deviance between desired and actual Hot/Cool tem-peratures, this is used to correct it. (-10~+10) Default settings are all 0.

0 1 2 3 4

Hot 0 5sec 10sec 15sec 20sec

Cold 0 1min 2min 3min 4min

Screen Functions(Setting)

⑨

⑧

③

①

⑫

②

④

⑩

⑪

⑬ ⑭

⑦ ⑤ ⑥

EmoS EmoS 15


⑥

⑦ Back Light : Used to protect the touch screen from burn-ins.Screen will turn off after set period of time, and turn back on upon touch.

⑧ Timer Setting Button : Press this button to set timer.

⑨ Deodorization Function : Press this button to use deodorization function.Can use timer(Max.60mins).

⑩ Electromotive Function : Press this button to use electromotive mode.

⑪ Door Lock Function : Press this button to use door lock mode(some models only)

⑫ Password setting : User can reset password.

⑬ Temperature Conversion Button : Can verify or usage. ℃ ℉

⑭ Room Settings : Room1 : Changes settings for 2 (Hot/Cool) compartments. Room2 : Changes settings for 4 (Hot/Cool) compartments. Room3 : Changes settings for 6 (Hot/Cool) compartments.

• Please do not change settings as one pleases.

• Default setting is Room1 mode.

Warning! !

EmoS

OK Button: After you’ve finished configuring, press this button to confirm andsave user settings, and configuration is complete.

EmoS 16


Starting Setting Mode

1.Do not touch ①,②,③

3. Enter Password( 4 letters) and push button.

④

x

• Default Password : “0000”

• If you decide to change the password, please take care not to forget it.

Warnings! !

①

②

③

2. Push ④ setting button two times.

EmoS EmoS 17


Setting Temperature

1. Pushing① and sets desired tem-perature.

3. ② manufacturers use only.

①

• Do not set ① over 100 (212 ).℃ ℉

Over 100 (212 ) setting can lead to product damage or malfunction.℃ ℉

Warnings! !

- +

2. Default temperature settings for delivery: Hot :70 (158 ), Cool : 5 (41 ).℃ ℉ ℃ ℉

Default temperature settings for Retherm: Hot :100 (212 ), Cool : 3 (37 )℃ ℉ ℃ ℉

②

③

5. Press ③button after finish and change to control mode.

• If want to change ② mode, please ask Manufacturer.

EmoS EmoS 18


Setting Back Light

1. This function is used to protect the touch screen from burn-ins.

3. Press ② and set desired time. Default initial setting time is 1 hour.

2. Press ① button for Backlight settings.

①

4. When finished, press “OK”.

②③

5. Press ③ to return to control mode.

• The screen will change to black when backlight function is on,

and will return to normal when you touch the screen again.

Warnings! !

EmoS EmoS 19


Setting Deodorization Func-tion

1. Check ‘v’ ① FAN(M) option to activate deodorization.

2. Use to change timer setting (max. 60 min)

①

②3. When finished, press ③ button to return to

control mode.

- +

1. Please Check ‘v’ DOOR LOCK, Driving Control for Electromotive

drive type.

2. Please do not Check ‘v’ DOOR LOCK, Driving Control for Manual drive type.

Setting DOOR LOCK, Driving Control

EmoS EmoS 20


Changing Temperature Scale

1. Press ① to verify temperature scale ( or )℃ ℉

2. Press ② button and change reservation mode.

①

3. Press ③ to verify temperature scale ( or )℃ ℉

②

③ ④

4. Press ④ button and change to Setting Mode.

⑤

5. Press ⑤ button to return to control mode.

• ① & ③ should be same mode.

ex) ① : = ℃ ③ : ℃

Warnings! !

EmoS EmoS 21


Setting Password

①

1. Press ① and enter password (4 letters) Default initial Password is “0000”.

3. Press button.x

4. Press ② button to return to control mode.

②

EmoS EmoS 22


2. Press the button to remove existing password.

BS

Changing Password

• When release Password : “0000”

• If change password, remember without fail.

Warnings! !

4. Install RFID Reader and execute program. (Refer to RFID Reader Installation Method/Additional functions) 5. Enter Password.

6. Touch Smart Card on RFID Reader and ③ button.

③

7. Push ④ button and check Password input correctly.

④

EmoS 23


Setting Reservation Timer

1. Press ① button

2. Set time, temperature, and timer duration.

①

②

③

3. Press ② button when finished, and change to setting mode.

4. Press ③ button to return to control mode.

EmoS EmoS 24


Hot/Cool Operation

1. ①,②,③ should be off mode.

①

3. ④ button change to yellow(RUN) color.

4. If operating normally, Compressor & Fan working with noise.

5. Can find temperature change after over 10 mins of operation.

④

Hot /Cool Graph Mode

1. Press ① button and change to Graph mode.

Press ① button again to return.

①

②

③

2. Press ① button.

EmoS 25


Reservation Timer

3. Press ② button.

4. ② button changed to yellow.

5. Setting timer.

6. ⑤ setting desired temperature.

④

①

②

③


②

③

2. Press ③ button.

⑤

7. Start operation at setting time.

8. Push ② button again for timer cancellation.

EmoS EmoS 26


Deodorization

3. ⑤ shows remaining time.

①

②

③


2.Press ④ button.

④ ⑤

• Keep Door opened during Deodorization.

Warnings! !

EmoS EmoS 27


Setting time

1. Press ① button two times.

①

2. ② change time, date and press “OK”

②

Pre-heating

1. Pre-heat hot room until it reaches desired temperature and put in foods. 2. Recommended pre-heat time is 30mins.

EmoS EmoS 28


Screen Functions (Electromotive Driv-ing)

EmoS

① Drive button: Pressing the button activates electromotive driving.Pressing again disables electromotive driving.

② Basic Speed Control: Allows you to control speed in 4 steps.

③ Rear-view Monitor: Allows you to monitor area behind cart with rear mounted cam-era. Touching rear-view monitor will change screen size.

④ Rear-view Monitor ON/OFF Button: Turns rear-view monitoring ON/OFF.

⑤ Door Lock ON/OFF Button: Locks the door (Some models only).

⑥ Alarm ON/OFF Button: Allows you to play a melody while driving in reverse.

⑦ Back Button: Pressing this button brings you back to the Hot/Cool control mode.

②

③

⑦

①

⑤

⑧

④

⑥

⑨

EmoS 29


⑧ Battery Residual Display :Red, Yellow, Green : Very Good.Red, Yellow : GoodOnly Red : Charging required.

• Only Red light comes, stop driving and charging immediately.

If not, battery life time will be shortened.

Warnings!

⑨ Patient meal information :Can store/recall patient meal information by smart card.

EmoS EmoS 30


Drive But-ton

①

Electromotive Button

EmoS

Driving Method

1. Press the Hot/Cool operation button, and after it stops,

Unplug the AC power cable and confirm that the Power

lamp turns off.

2. Press the Drive button to switch to electromotive driving.

When it switches to driving mode screen, press the Elec-

tromotive button.

EmoS 31


Electromotive Driv-ing

①

3. ① button changed to Yellow(RUN)

EmoS EmoS 32


Reverse Drive Button

Forward Drive But-ton

EmoS

Driving Method

3. Adjust default speed settings for driver.

4. To move forward, lightly press the right button on the handle and the cart will drive forward. Press a little harder and the speed will slowly increase.

5. To move in reverse, lightly press the right button on thehandle and the cart will drive in revers. Press a little harderand the speed will slowly increase.

6. To stop, release the button and the cart will stop.

EmoS 33


Warning! !

• If Electromotive driving is not operating properly,

Please check whether the electromotive lever is in the correct position or not.

Warnings!

Manual

Electromotive

• During electromotive driving mode, can drive manually temporally

with manual lever.

EmoS

Driving Method

• To switch to Hot/Cool mode after you’ve finished driving, please press the Drive button and push the Electromotive Drive button to stop the cart before changing modes as necessary.

EmoS 34


Tray Storage

1. Please store cold food along the front side, and hot food along the rear side of the cart, on FLAT TRAYs in the respective col-umns.

Cool Compartment

Hot Compartment

Tray Insertion

1. Align the FLAT TRAY onto the protruding edge of the Holder Lever, and push tray gently into the compartment.

Insertion (upper) Insertion (lower) Middle (upper) Middle (lower) After Insertion

2. Once the FLAT TRAY is inserted completely, the spring-loaded Holder Lever will return to its normal position.

Holder Lever

EmoS 35


① Please read through the user’s manual, and learn the proper usage procedures before operat-ing. ② Please check for damage and status of tires before you continue.

- Check tires and wheels for damage before servicing.

- Check Hot/Cool compartments for debris and damage before connecting the AC power cable.

- Do not store food for a long time. This equipment is not designed for long-term storage.

Atten-tion!

!

③ Please operate 30 minutes to 1 hour before serving the food. (Preheat before setting food)

[Maintain temperature by setting Hot/Cool compartment temperature]

④ Check the manual shift lever to see the wheel lock status of the cart before use.

When stopped on a ramp, never activate the manual shift lever or free-drive switch.

⑤ To ensure safe use and operation, please turn power off after use.

⑥ Check safety precautions before operation.

⑦ Use the speed control buttons to adjust to an appropriate driving speed.

⑧ Inspect tires and driving path before leaving.

⑨ Do not operate in difficult or straining circumstances.

Warn-ing!

!

- If outdoor use is inevitable, please use our waterproofing material.

- While driving, please be aware of hazards around you.

- Check AC power cable for damage or breakage before use.

[May cause electric shock]

⑩ Please drive as slowly as possible to ensure safe driving

⑪ After use, please turn off the power button and charge the battery for future use.

How To Use

EmoS 36


▶ Storage After Use

① After serving, power off and safely store the cart.

② To maintain performance and prevent discoloration, store at room temperature and humidity.

- If not maintained and stored properly, the cart may rust, or electrical components may get

damaged, resulting in a risk of electric shock.

Warn-ing!

!

▶Maintenance

① To ensure safe operation, please check the conditions of the tires from time to time.

② Once charging is complete, please be sure to unplug the cable to prevent any damage or

strain

to the cable.

- Do not touch the plug with wet hands. There is a risk of electric shock.

Warn-ing!

!

③ Do not shake, lift, or otherwise apply any excess strain to the cart.

④ When cleaning the cart, use a soft cloth dampened with water (with mild detergent), and let

dry after use. Do not use thinner or benzene, as it may cause discoloration or deformation.

Atten-tion!

!

- Do not use a hose directly to wash the cart.

Storage and Mainte-nance

EmoS 37


Charge Check

- The cart uses two 12-volt batteries.- Use the charger mounted in the cart to recharge a dead battery.- Do not exchange the cart battery with an automobile battery.

- Using a charger other than the one mounted to the cart may cause overcharging, and may

affect the battery life of the cart.

Atten-tion!

!

- Check Battery Charge display on front panel to check remain-

ing battery life.

. Shortage: Needs to be charged.

. Charging: Currently charging.

. Full: Finished charging.

How to Charge

① Press the Power button to turn off.

② Connect the AC power cable provided with the product to connect it to the front panel.

③ Connect the other end to a power outlet with the right power specifications.

It will take 6-8 hours to charge. (may differ based on remaining battery life)

- Do not charge near areas where there is a risk of fire.

- Do not charge while the battery is frozen. If the battery is cold or frozen, let it thaw for a few

days before charging.

- Do not use manual driving while battery is charging. It may cause damage to the cart or the

AC power cable.

Atten-tion!

!

EmoS 38

BATTERY AND CHARGING

① Switch off circuit breaker.

② Remove battery cover.

③ Disconnect cables from battery terminals

④ Remove old battery.

⑤ Insert new battery.

⑥ Connect the red cable to the positive (+) battery terminal.

⑦ Connect the black cable to the negative (-) battery terminal.

⑧ Put the battery cover back on, and switch on the circuit breaker.

Battery

Battery Cover

Circuit Breaker Switch (Up: on, Down: off)

- Battery terminals and other components associated with batteries are made of lead or have

lead-containing water. Please wear safety glasses and gloves when handling batteries.

Please be sure to wash your hands after handling the battery.

- The cart uses a battery that weighs about 12.6Kg. Avoid straining to lift it, as it may cause

bodily injury.

Warn-ing!

!

- Switch off the brake circuit when not in use for long periods of time to avoid the battery from

discharging.

Atten-tion!

!

Replacing the Battery

EmoS 39


① Is it okay to use a charger from a different manufacturer?

In order to ensure your safety and proper performance, we recommend that

you use the charger that was supplied with your cart.

② How often should the battery be charged?

- If you use the cart every day, please charge each day after use.

- If you don’t use the cart very often, please make sure to charge fully once a month.

- Do not leave the battery in a completely discharged state.

③ Why doesn’t the newly replaced battery work as well

- Please charge battery all the way up to full before using.

- After completely discharging and recharging 5 or 6 times, the battery will reach 100% capacity

and achieve its maximum battery life.

- Until the battery reaches 100% capacity, please use in moderation for about one week.

④ How should I maintain the battery when not using the cart for long periods of time?

- Before storing the cart, charge the battery to full, and switch off the circuit breaker switch.

- We cannot guarantee the performance of a third-party battery.

Atten-tion!

!

Frequently Asked Questions (FAQs)

EmoS 40


Rear Cam-era

Warning!

Front Touch Sensor

Front Touch Sen-sor

EmoS

- Provides a field of view behind cart while driving in

reverse to prevent accidents.

- To drive slowly, or when there is risk of danger, ap-ply a little pressure to the touch sensor to slow down the driving.

• By default, the Front Touch Sensor is configured to set the speed to 10%.

When pressure is applied to the sensor, speed is reduced, and when it is released, the cart will

return to normal driving speed.

(Please check surroundings for hazards and check safety precautions before releasing the sen-

sor in order to minimize risk of crashes and accidents.)

EmoS 41

CONVENIENCE

Emergency Switch

EmoS

- Press this switch in the case of an emergency, when an obstacle comes into the path of the cart, or any other urgent matter.

- Once you press the button, the cart will come to a sudden stop in about 30cm.

- When you have determined that it is safe to operate and drive again, press the Electromotive Drive button Off and On again to resume.

EmoS 42

CONVENIENCE

EmoS

RFID Reader Installation

▶ Components

① ② ③ ④

1. ① RFID Reader

2. ②USB –TO- SERIAL CONVERTOR

3. ③ USB-TO-PS2 CONVERTOR

4. ④SMART CARD

EmoS 43

ADDITIONAL FUNCTIONS


▶ Connecting Computer and RFID Reader

1. Connect computer and RFID Reader with USB port.

EmoS EmoS 44



▶ USB –TO- SERIAL CONVERTOR Drive Installation

1. Follow CD Manual Instructions.

EmoS EmoS 45


Setup Program

▶ This program provides Password change, In/out put Patient meal information, Temperature data, Event Data ,etc.

▶ Setup program

① ②

③

④

EmoS EmoS 46


1. Press ① button and setup menu.

2. Check your computer’s settings (Control Panel/Device Manager/Port/USB Serial (COM x)

3. Press ② button and set port. ex) If the port is Control Panel/Device Manager/Port/USB/ Serial (COM 3), select COM3 communication port in the software.

4. Press ③ , ④.

Setup Program

▶ Input patient meal information

① ④

③

②

1. ① input patient meal information.

2. Touch smart cart on FRID Reader and press ② button (Transmission processing and can taking a time).

3. Press ③ button and check transmission completed.

③

4. Press ④ button to clear.

EmoS EmoS 47


Setup Program

▶ Input patient meal information on touch screen

①

1. Touch smart card on screen and press ① button.

② ③ ④

2. Press ② and input completed.

3. Press ③ for clear.

4. Press ④ to change Electromotive mode.

EmoS EmoS 48


Temperature Data and Event Data

▶ Data Storage (USB memory)

①

1. Insert USB memory in ①.

②

3. Press ② button and change to Yellow (30days Data memory in USB).

4. If USB memory not found, check USB memory again.③

④

⑤

2. ③, ④, ⑤ should be OFF mode.

EmoS EmoS 49


▶ Checking data on Computer

1. Insert USB memory on computer.

2. Run program and press ①,② button and select file and press ③ button.

①

②

③

EmoS


EmoS 50


▶ Checking data on computer

1. ① Can read data.

2. Press ② button to delete data.

① ②

EmoS


EmoS 51


External Thermometer

2. Press ① red button.

3. ② displays temperature.

① ②

1. Insert thermometer inside foods.

EmoS EmoS 52


▶ Before Cleaning

① Unplug power cable, in order to avoid

electric shock, and other hazards.

② Press the power button to turn off the screen.

▶ Maintenance after each use – Drain Case Handling

① The drain case holds any condensation from the freezer or residual drainage from cleaning.

Please open the case and empty the contents.

* If the residual drainage is not coming out properly, please contact us.

Drain Case

▶ Tray Maintenance

① Please remove contaminants using a mild detergent when cleaning.

② In order to prevent deformation and damage to the product, do not use heated air blowers for

more than 20 minutes at 70 - 90 .℃

- Exercise caution when handling near cooking appliances, and keep away from fire

- Do not use for cooking, or with cooking appliances. (Unintended use is prohibited)

- Do not use with damaged or contaminated goods.

Attention!!

Cleaning

EmoS 53

DAILY MAINTENANCE

▶ Daily Maintaining and Cleaning DutiesClean the following. (For hygienic reasons, it is recommended that you clean after every use.)

1

2

3

4

5

① Divider

② Door

③ Door Seal Contact

④ External Cover

⑤ Bumper

- Use a mild detergent diluted to 100x with a

soft cloth to wipe clean.

- When using a mild detergent, wipe off all excess

with a wet towel (lukewarm water)

- Do not use detergents with alcohol, antiseptic so-

lution, or acid.

▶ Clean with water

- Do not spray with anything other than water, as it may cause discoloration

- Do not spray water on the 고내 pan, as it may cause malfunction or discoloration.

EmoS 54

DAILY MAINTENANCE

Follow the simple steps below to diagnose and repair a faulty product.

Hot/Cool not working

- Check the circuit breaker attached to

the top cover.

- Check to see that the AC power

cable is plugged in correctly.

Driving not working

- Check to see that the circuit breaker switch is on.

- Check to see that the battery is charged.

- Check to see that the speed button is working

properly.

- Check to see that the lever is

facing down. (up: manual,

down: motorized)

Man-ualMotor-ized

If your problem still exists after checking the above, please contact our customer service department

right away. Using a third party for repairs, parts, or service may cause device malfunction, and may

also be a risk of fire or electric shock, and will also void your warranty.

EmoS 55

TROUBLESHOOTING

EmoS

Like other vehicles, the cart requires regular maintenance. Here are a few checks that you

can perform. Some may require aid from a professional. Following these steps will allow you

to use the cart for a longer period of time without any serious malfunction.

Brake check

- In Electromotive driving mode, please set the speed setting to 1.

- Until you hear the “click” sound, press the speed control button. Each time you press the

speed control button, you should hear the sound.

- Repeat this process in forward and backward directions, three times each.

Daily Check

- Check the position of the speed control button. When the speed control switch is released, the cart should not lean on one side.- Check each of the features on each of the operating panels.

Weekly Check

- Check condition of your tires.- If your driving feels different, please contact our customer service department.- Please check that the brakes are operational.- Check for abnormal noise from the freezer.- Check for abnormal heat from the Hot/Cool compartments.

Precautions

EmoS 56

TROUBLESHOOTING

EmoSEmoS사용설명서

Monthly Check

- If any of the tires are excessively worn out, please replace them.

- Please maintain cleanliness at all times.

- Check for anomalies in the tray holders and tray dividers.

Yearly Check

- To maintain longevity of the cart, please schedule a yearly maintenance check-up with our

company.

If you see any of the issues below, please contact our customer service department

- Excessive motor noise

- Electrical wiring is or appears to be damaged

- Power connector is broken

- Uneven wear on tires

- Equipment malfunction

- Only one tire functions

- Wheel is damaged

- Speed control is not functioning

- Temperature for Hot/Cool compartments do not change

EmoS 57

TROUBLESHOOTING

Warranty

Item:

The equipment you purchased will be re-

paired under warranty at no cost for 1 year

by our customer service department.

Purchase Date: Contact Person:

MYUNGSE CMK

Warranty

This product is to be used only in accordance with the user manual, and it is to be properly managed and maintained according to the maintenance guidelines in the manual.

If all procedures and guidelines were followed, and the product is found to be defective within the war-ranty period (1 year from date of purchase), the product will be repaired at no cost.

Please contact our customer service department as soon as possible with any warranty issues.The following, however, are not applicable for the 1-year warranty:1. Battery2. Tire puncture (nail, for instance)3. Natural disasters, failure caused by user’s negligence, improper maintenance, or damage or failure

due to improper repair from a third party are not covered by the warranty.

EmoS 58

WARRANTY INFO

myungse cmk. user manual this manual will explain proper usage procedures for the electromotive...

Documents

emos emos safety precautions

emos specifications

option emoshc20ef96mm1

battery faqs emos

touch sensor emoshc24es80mm1

rear camera emoshc24ef80mm1

user manual slide

touch screen