mycoflex resyst en 02
DESCRIPTION
Joint sealingTRANSCRIPT
K Exceptionally high chemical resistance
K Resistance to mechanical stresses
K For expansion joints in floors and walls
Mycoflex Resyst The joint sealing system for the highest requirements
The joint sealing system for the highest requirements
Mycoflex Resystak
ut 1
4076
4 EN
Contact details Protection Technologies
MC-Bauchemie Müller GmbH & Co. KGProtection TechnologiesAm Kruppwald 1-846238 BottropGermany
Phone: +49 2041 101-10Fax: +49 2041 101-188
[email protected] www.mc-bauchemie.com
The joint sealing power-packer
Conventional sealing systems for expansion joints based
on polyurethanes, silicones, MS polymers or polysul-
phides can often give rise to weak points in the structure.
Chemically, they frequently exhibit less resistance than
the adjoining coating.
Maximum resistance for a safe and secure solution
Now, with Mycoflex Resyst prefabricated polymer foam mouldings, you have all you need for the sealing of expan-sion joints offering exceptional mechanical and chemical resistance.
Durable seal
Even under conditions of widely varying temperature-relat-ed component expansion values, the material properties of these mouldings ensure a reliable, permanent seal. Offer-ing high chemical resistance, Mycoflex Resyst thus offers
a thoroughly durable solution in all fields of application in-volving exposure to aggressive media.
Easy to install
The Mycoflex Resyst moulding is coated with Mycoflex Resyst Adhesive over its contact flank surfaces and then simply pressed manually with a degree of prestressing into the expansion joint.
Moulding profiles and thicknesses to suit every job
The Mycoflex Resyst joint sealing can be used for all com-monly encountered expansion joint dimensions. The avail-ability of prefabricated, precut mouldings for various sizes of corner, angle and T-piece connection ensures easy and reliable installation. The entire system required for each ap-plication is supplied ready adapted to the requirements of each job situation.
Mycoflex Resyst
Attaching the straight mouldings to the corner piece Secure in-line connection of the mouldings with a 60° mitre cut
Performance features
K Exceptionally high chemical resistance
K Resistance to mechanical stresses
K Secure bonding to different materials such as concrete, steel, resin coatings and polymer concrete
K High rigidity for simple vertical installation
T-piece
Floor-wall corner
Corner piece
Straight moulding
Intersection
Standard profile mouldingsInstallation