mw-rm-vengeance full featured design
TRANSCRIPT
Full Featured DesignThe Cutting Edge
Featuring the latest Intel Core™ i7 Kaby Lake technology, coupled with the power of MikroTik RouterOS, this unit is a routing powerhouse, and nothing like it exists in the market today!
Custom-built by Maxxwave, this high speed gigabit router is built for performance and is based on industrial strength hardware. By using the latest 7th generation Core™ i7 Kaby Lake technology, we are able to offer unmatched performance with better than ever energy efficiency, and low power consumption. This router comes with a MikroTik VMware OSXi 6.X (free edition) and MikroTik RouterOS CHR P10 (10 Gig) as a VM, however you can use a VM to run Ubuntu, or even Ubiquiti’s UniFi controller. Easy setup allows you to plug it in and start configuring.
Maximized PerformanceEach Gigabit port has its own controller on a PCI-E bus. There is a rear 8x expansion slot inside for additional supported cards like the HotLava 4-Port fiber cards. Additional expansion via a front slot gives you up to 7 additional copper/fiber port combinations. The router comes with 16GB of RAM and runs from a 120GB msata.
Based on the latest Intel C236 chipset, the router has support for 9K jumbo frames, receive-side scaling and checksum offload. The network interface queues are multi-threaded across multiple CPU cores, providing outstanding performance.
The RouterMAXX Vengeance is not your average router. It provides up to 10Gbs of routing capacity with 8 individual integrated cutting-edge Intel gigabit controllers. Topped off with Quad 4.2GHz cores and 16GB of DDR4 RAM — There is no task too demanding for this router. The 1U Rackmount form factor and cloud hosted RouterOS software provides a rich feature set found only on routers costing 5 times as much. MPLS, OSPF, BGP, PPPoE and OpenVPN are some of the features included.
• 4.2GHz Intel® quad core i7-7700 Kaby Lake processor
• 16GB DDR4-2400 UDIMM RAM expandable up to 64 GB memory
• 8 GbE ports, 1 expandable LAN module
• 1U redundant 280W power supply (1+1)
• IPMI module for optional use
• LCD display of RouterOS status
Key Product Benefits:
MAXXW A V E
MAXXW A V E
MW-RM-Vengeance
Distributed exclusively by Baltic Networks USA 630.929.3610 www.balticnetworks.com
OPTIONAL ACCESSORIES:
• 8-Port GbE Copper Module
• 4-Port GbE Copper Module
• 8-Port GbE Fiber Module
• 4-Port GbE Fiber Module
• 8-Port GbE Mix Module
• 2-Port 10GbE Copper Module
• 4-Port 10GbE Fiber Modules
HotLava 4 Port SFP Gigabit Adapter (optional)
FRONT Shown with network card (optional)
Back
Technical Specifications
Product Features• CPU: 4.2GHz Intel® quad core i7-7700 Kaby Lake processor• Chipset: Intel® C236• RAM: 2 x 8GB DDR4-2400 UDIMM non-ECC/ECC memory for
a total of 16GB; expandable up to 64 GB• BIOS: AMI SPI Flash BIOS• Storage: 2 x mSata• Network Interface: 4 x Sata• I/O Interface: 1 x RS-232 (RJ-45 Type), 2 x USB 3.0, 8 x RJ-45
LAN ports• Watchdog Timer: [System reset] 255 levels, 1-255 sec
[LAN bypass] 7 levels, 1-64 sec• Expansion Slot: 2 x Mini card slots (for optional); PCIe x8 slot
optional• USB: 2 x USB 3.0 port on front side• Other Features: LAN bypass function through latch relay two
pairs (LBP1: Port3 and Port4 / LBP2: Port 5 and Port6)• Power Supply: 1U redundant 280W power supply (1+1)
Operating System• VMware OSXi 6.X (free edition)• MikroTik RouterOS CHR P10 (10 Gig) as a VM
Mechanical/ Environmental• Form Factor: 1U rackmount• LED: Power, HDD, LAN bypass1~2, GPIO• Operating Temp: 0°C to 45°C (32°F~113°F)• Storage Temp: -20°C to 70°C (-4°F~158°F)• Humidity: 10% - 90% RH, non-condensing• Chassis Material: Steel• Dimensions: 44mm (H) x 430mm (W) x 450mm (D),
1.73” (H) x 16.84” (W) x 20.59” (D)• Weight: 8.5kg (18.74 lb) net, 9.8kg (21.61 lb) gross• Certification: FCC class A / CE class A
Packing List1 x RouterMaxx Vengeance 2 x SATA Cable1 x Power Cord1 x Rackmount Ears
MAXXW A V E
dimensional view
Distributed exclusively by Baltic Networks USA 630.929.3610 www.balticnetworks.com
FRONT Shown with network card (optional)
back