mutual recognition of general construction induction ......
TRANSCRIPT
Bulletin
Mutual recognition of general construction induction training cardsThis information bulletin provides a guide to mutual recognition of interstate general construction induction training cards (White Card).
A white card that was issued under a corresponding WHS law (and remains valid) will be recognised under Regulation 318 of the Work Health and Safety (National Uniform Legislation) Regulations.
The White Cards listed in this bulletin are examples of interstate cards that are valid in the Northern Territory.
The examples in this bulletin may not be comprehensive, please contact the interstate authority if you wish to confirm the validity of an interstate card.
It is important to note the following:
Mutual recognition is of White Cards only and does not extend to mutual recognition by jurisdictions of trainers or the delivery of training
A person conducting a business or undertaking (PCBU) must ensure that task induction and site–specific induction training is undertaken as required under Regulation 39 of the Work Health and Safety (National Uniform Legislation) Laws.
TasmaniaTasmanian white cards are recognised by NT WorkSafe. The card must include the following information:
Issue date and card number Name, date of birth and signature of the cardholder.
2Mutual recognition of general construction induction training cards (V3.1 – 13 December 2017)
QueenslandQueensland white cards are recognised by NT WorkSafe. The cards must include the following information:
Issue date, card number and RTO number Name, date of birth and signature of the cardholder.
Queensland blue cards continue to be valid and recognised in Queensland, therefore these cards are also recognised by NT WorkSafe. The cards must include the following information:
Issue date, card number and RTO name/number Name and signature of the cardholder.
South AustraliaSouth Australian white cards are recognised by NT WorkSafe. The card must include the following information:
Issue date and card number Name, date of birth and signature of the cardholder.
3Mutual recognition of general construction induction training cards (V3.1 – 13 December 2017)
Australian Capital TerritoryACT white cards are recognised by NT WorkSafe. The cards must include the following information:
Issue date, card number and RTO number Name, date of birth and signature of the cardholder.
Caption: Sample ACT construction induction card (from 1 January 2012)
Caption: Sample ACT construction induction card (1 September 2009 – 31 December 2011)
Western Australia Western Australia white cards are recognised by NT WorkSafe. The cards must include the following information:
Issue date and card number Name and signature of the cardholder.
4Mutual recognition of general construction induction training cards (V3.1 – 13 December 2017)
Western Australian (CSAT) cards were issued by the WorkSafe Western Australia Commission for Occupational Safety and Health. These cards are also recognised by NT WorkSafe. The cards must include the following information:
Issue date and card number Name and signature of the cardholder.
VictoriaVictorian white cards are recognised by NT WorkSafe. The cards must include the following information:
Issue date and card number Name, date of birth and signature of the cardholder.
Victorian red cards issued prior to 1 July 2008 are recognised by NT WorkSafe. The cards must include the following information:
Issue date, card number and name of RTO/Training Provider Name and signature of the cardholder.
5Mutual recognition of general construction induction training cards (V3.1 – 13 December 2017)
New South WalesNSW white cards are recognised by NT WorkSafe. The cards must include the following information:
Issue date, card number and RTO number Name, date of birth and signature of the cardholder.
Caption: Sample NSW construction induction card (from 1 January 2012)
Caption: Sample NSW construction induction card (1 September 2009 – 31 December 2011)
Caption: Sample NSW construction induction card (29 March 2004 – 31 August 2009)
Contact usFor further information please contact us on 1800 019 115, facsimile (08) 8999 5141, via email at [email protected] or go to the NT WorkSafe website at www.worksafe.nt.gov.au